field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

ResponsibilitiesThis will be the general / primary functions for this role:<ul> <li>Prepare Plan for NPI projects and coordinate with all stakeholders to ensure good quality product.</li> <li>Coordinate with R &amp; D /New Product Development groups to develop strategies for new products.</li> <li>Provide engineering support for all activities in product development process.</li> <li>Prepare project timelines and identify all resources, requirements &amp; financials for new processes.&nbsp;</li> <li>Monitor status of all new products and ensure effective execution of projects according to required policies, procedures and government regulations.</li></ul>Job Responsibilities<ul> <li>Coordinate with engineering and product management departments while developing and implementing Manufacturing Plans for product.</li> <li>Assist Manufacturing department and manage communication across all departments.</li> <li>Develop product test plans and perform productions test according manufacturing process instructions.</li> <li>Assist New Product Introduction Manager and Process Engineering Manager with integration of all products according to product requirements.</li> <li>Monitor operations of product and evaluate designs and ensure adherence to all design and manufacturing principles.&nbsp;</li> <li>Ensure compliance to all ECO procedures and work instructions.</li> <li>Work with design engineering and assist in transition of design prototypes into cost efficient and high-volume products.</li> <li>Provide Technical support to Materials Management team for all RFP initiatives and administer effective use of outsource products.</li> <li>Develop prototype design according with required techniques and manufacturing processes.</li> <li>Work with warehouse Manager to maintain required inventories, ensure availability of equipment, tools, test equipment and prototype parts.</li> <li>Analyze and recommend improvements to all production process and methods to facilitate better throughput and quality improvements.</li> <li>Design/ implement efficient material handling, flow strategies and maintain safe manufacturing processes at all times.</li> <li>Analyze and recommend corrective action in case of any design failure.</li> <li>Coordinate with senior management and maintain knowledge of product status and prepare appropriate reports.</li> </ul>QualificationsEducation&nbsp;<ul> <li>Engineer Degree, High School Diploma or&nbsp;</li> <li>GED Equivalent or 3 years of Experience in the position.</li></ul>Skills and Abilities<ul> <li>Microsoft office, basic PC skills.</li> <li>Ability to operate mobile equipment.</li> <li>Bilingual Spanish-English a plus.</li></ul>Experience<ul> <li>Good computer skills including Microsoft office applications.</li> <li>Good business communication skills including the ability to write simple correspondence, verbally communicate to customers, clients and other employees.</li> <li>Ability to read and comprehend simple instructions, short correspondence, and memos and to apply commonsense understanding to carry out carry out detailed but uninvolved written or oral instructions.&nbsp; &nbsp;</li></ul>About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

ENGINEER LAUNCH LEADER

3D Animation &amp; Game Design - Senior Portfolio - Part-time Lecturer (Academic Year 2025-2026)UIW MissionPosition SummaryThe 3D Animation &amp; Game Design (ANGD) Program in the School of Media and Design seeks a part-time lecturer to teach Senior Portfolio in the areas of 3D Modeling. In all matters, faculty are expected to maintain the highest standards of professional ethics consistent with the UIW mission. Official duties and responsibilities of faculty members at the University include teaching, and other activities as assigned.Essential FunctionsBasic Instructional Duties:• Prepare course outlines based on approved departmental syllabi.• Deliver synchronous online instruction to 3D Animation and Game Design students via Microsoft Teams.• Prepare and execute timely and meaningful assessments for assigned courses.• Work collaboratively with departmental faculty to ensure standard curriculum outcomes are met.• Be available outside of class to help students learn and to answer their questions (1 hour per 3-hour class, physically and/or electronically.)• Adhere to UIW Faculty Handbook policies and procedures, including timely record keeping of student activities, fair and equitable evaluation of student performance, and timely feedback to students regarding their performance in the course.• Conduct respectful relationships with faculty, staff, and students both in and outside the classroom.• Maintain contact with the department chair and participate in meetings upon request.• Perform other duties as assigned. Job DutiesKnowledge Skills and Abilities• Ability to work with the director of the 3D Animation &amp; Game Design program to develop and deliver instruction on industry-standard skills in the field of 3DModeling;• Knowledge of game development industry norms and pipelines;• Must be knowledgeable and experienced in at least one industry-standard engine (preferably Unity or Unreal);• Ability to effectively learn and use instructional technology.• Willingness and flexibility to teach day, evening and weekend sections, as needed;• Ability to incorporate technology into teaching;• Ability to work effectively with individuals from diverse communities and cultures;• Employee shall adhere to all applicable rules and regulations of the University, the Conference, and the NCAA.Required EducationBFA or BS in Game Design, Game Programming, Computer Science, or Game Production.ORBachelor's Degree in relevant discipline. Note that education of less than Bachelor's Degree with at least five (5) additional years of significant experience in the field of modeling will be considered.Required Work ExperienceSignificant experience in the game development industry in the field of modeling.Preferred QualificationsBoth teaching and industry experience.Required Certifications, Licenses or RegistrationsN/A.Work HoursBased on course assignment.Physical DemandsTypical for faculty in this discipline.Posting Number: UN926POJob Type: Part TimeJob Category: FacultyDesired Start Date: 08/18/2025Position End Date (if temporary):Reports To: Dean, School of Media &amp; DesignSalary: $4000 lecture courses-$5000 studio courses or based on enrollmentOpen Date: 04/09/2025Close Date:Open Until Filled: YesSpecial Instructions to ApplicantNone.To apply, visit <a href="https://apptrkr.com/6314341UIW" target="_blank">https://apptrkr.com/6314341UIW</a> is committed to a policy of equal opportunity in employment, without regard to race, color, sex, sexual orientation, citizenship status, national origin, age, marital status, disability, genetic information, gender identity or expression, veteran status, pregnancy, and religion (except in limited circumstances when religious preference is both permitted by law and deemed appropriate as a matter of University policy).jeid-b9209d156e01b24397f7276d3bd03730

University of the Incarnate Word

3D Animation & Game Design - Senior Portfolio - Part-time Lecturer (Academic Year 2025-2026)

ResponsibilitiesThis NPI PROJECT ENGINEER - QUALITY position will be located in Whitehall (Michigan) Casting and will play an important role in the qualification of New Product Introductions castings, assuring the quality of product produced and conformance to the applicable customer and internal specifications.&nbsp;This position will work as part of a team with Program Managers and Engineering in the development and qualification of new or improved products.JOB ROLES:<ul> <li>Systems thinker--sees the business and its operation holistically; understands actions and reactions; considers multiple pathways of potential effect before decisions; thinks strategically about interventions with an eye toward scale.</li> <li>Optimizer--constantly challenging the organization to work smarter; supports others to ensure they have what they need to do their work successfully.</li> <li>Anticipation--looks ahead to minimize potential issues and maximize advantages; prepares others for what comes next.</li> <li>Operational accelerator--drives continuous improvement; understands ramifications of automation and other advances; advocates for safety, ergonomics and scalable solutions.</li> <li>Organization and structure--works within existing structures while striving to improve and standardize them; provides accurate information; galvanizes others toward common goals.</li> <li>Influence--leverages knowledge, relationship, data and perspective to persuade, educate and navigate; gains buy in and adoption of ideas and practices at scale; interacts with a variety of stakeholders.</li> <li>Data informed--focused on things that drive quantifiable business outcomes; evaluates based on quantitative feedback; knows and explains the “why” behind actions.</li> <li>Prioritized reaction--handles the unexpected without losing sight of important objectives; reacts where greatest leverage points exist.</li> <li>Relationship--connects individually and with teams across shifts and practices; builds rapport and commonality; creates a “win together” ethic; serves as liaison between shop floor and engineering; keeps the pulse of the floor; helps people feel heard.</li> <li>Detail orientation--understands and tracks multiple customer specifications and communicates to internal stakeholders; understands external audit elements and prepares organization and its functions, accordingly; implements and oversees final review elements; understands organizational capabilities and matches those to customer requests and requirements; provides easy to follow work instructions.</li></ul>JOB RESPONSIBILITIES:This position is responsible for meeting quality requirements from purchase order to ship of parts.&nbsp; Tasks, as required, are performed to warrant the processing of parts to customers’ purchase orders, specifications and engineering drawings. &nbsp; Product Quality Engineer will have a technical understanding of engineering drawings and will have the ability to manage suppliers and/or quality projects related projects<ul> <li>This position will lead the APQP process for NPI products.</li> <li>Process Certification - Defines and implements control plans and FMEA per customer requirements; Collects, analyzes and prepares statistical data per control plan.</li> <li>Develops and implements quality control procedures and standards for NPI projects (inspection, testing and evaluation).</li> <li>Periodic Qualification and Re-qualification - Prepares L/O and MRB forms; Provides additional support data to customer; Develops VSE/ESA requirements.</li> <li>Create and maintain documentation for quality assurance procedures and reports.</li> <li>Work with the engineering team to improve product reliability and performance.</li> <li>Involved in procedures that ensure that critical and complex aerospace components meet all customer specifications and blueprint requirements.&nbsp;</li> <li>Improves process performance through corrective action process and other initiatives.</li> <li>External customer escapes - Investigates and analyzes root cause and develops and implements correction action plans.</li> <li>Quality Audits - Formulates, performs and validates quality system and part audits.</li> <li>Quote Prep - Reviews BOM and routing and review specs and B/P.</li> <li>Process Development - Writes work instructions.</li> <li>Part Shipment - Obtain certification as a customer release agent as required.</li> <li>Coordinate with suppliers and customers to resolve quality-related issues.</li></ul>QualificationsBASIC QUALIFICATIONS:<ul> <li>A Bachelor’s degree in a STEM field from an accredited institution.&nbsp;</li> <li>Knowledge of Six Sigma, statistical analysis, and scientific methods for problem solving.</li> <li>Working knowledge of Microsoft Office Suite software.</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>PREFERRED QUALIFICATIONS:<ul> <li>Bachelor’s degree in Engineering from an accredited institution.</li> <li>2+ years experience in the investment casting industry.</li> <li>Experience with inspection, testing, validation, and certification processes.</li> <li>Strong understanding quality assurance methodologies.</li> <li>APQP experience, detail-oriented with a strong commitment to quality and safety.</li> <li>Experience in new process control development and product start-ups.</li> <li>Project management experience.</li> <li>Good verbal communication skills.</li> <li>Strong organizational skills</li> <li>Proven problem-solving skills using sound fundamentals</li> <li>Ability to effectively work/communicate as part of a project team.</li> <li>Ability to prioritize and manage multiple tasks and activities.</li></ul>About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Project Engineer (Quality)- New Product Introduction

ResponsibilitiesHowmet Fastening Systems (HFS) is seeking a Automation Design Manager in our Fullerton, CA&nbsp;location. &nbsp;Work in conjunction with management of various levels to propose, develop, and implement new and machine building technology for production equipment of aerospace fasteners.&nbsp;Essential Duties and Responsibilities:<ul><li>Work with Howmet Fastening Systems business owners to align technological solutions with manufacturing challenges such as safety, process control, or productivity.&nbsp;</li><li>Develop and promote a strategy of continuous improvement based on technological solutions including custom automation, smart manufacturing or artificial intelligence.</li><li>Manage safety, schedule, cost, and performance of projects using internal and external resources</li><li>Identify, propose and implement automation solutions including use of cobots, robots and fixed automation to significantly reduce labor and safety incidents.</li><li>Identify, propose and implement process control improvements such as recipe-based setup, poke-yoke, smart manufacturing systems to reduce downtime and scrap.</li><li>Identify, propose and implement next level technology especially in the areas of net shape forming and machining to reduce cost.</li><li>Manage a team of design engineers and development tool and die makers to adapt or produce production equipment for custom applications.&nbsp;</li></ul>QualificationsBasic Qualifications:<ul><li>5- 7+ years related experience and/or training; or equivalent combination of education and experience. &nbsp;</li><li>Experience in the metal forming or components industry&nbsp;</li><li>Experience in automation and or fabrication&nbsp;</li></ul>Preferred Qualifications:<ul><li>Bachelor’s degree preferred. &nbsp;</li><li>Knowledge of Syteline Manufacturing software, Microsoft excel, word, power point, and other computer related activities proficiently.&nbsp;</li><li>This position requires a tool and die or machine building experience.&nbsp; This position requires a minimum of completion journeyman tool and die apprenticeship.</li><li>Experience in aerospace or fastener manufacturing&nbsp;</li><li>Experience mechanical and/or electrical knowledge</li></ul>Benefits/Salary:&nbsp;The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location.&nbsp;The salary range for this position is $116,000 to $175,000.About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutHowmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

Automation Engineering Manager

3D Animation &amp; Game Design - Senior Portfolio - Part-time Lecturer (Academic Year 2025-2026)UIW MissionPosition SummaryThe 3D Animation &amp; Game Design (ANGD) Program in the School of Media and Design seeks a part-time lecturer to teach Senior Portfolio in the areas of 3D Modeling. In all matters, faculty are expected to maintain the highest standards of professional ethics consistent with the UIW mission. Official duties and responsibilities of faculty members at the University include teaching, and other activities as assigned.Essential FunctionsBasic Instructional Duties:• Prepare course outlines based on approved departmental syllabi.• Deliver synchronous online instruction to 3D Animation and Game Design students via Microsoft Teams.• Prepare and execute timely and meaningful assessments for assigned courses.• Work collaboratively with departmental faculty to ensure standard curriculum outcomes are met.• Be available outside of class to help students learn and to answer their questions (1 hour per 3-hour class, physically and/or electronically.)• Adhere to UIW Faculty Handbook policies and procedures, including timely record keeping of student activities, fair and equitable evaluation of student performance, and timely feedback to students regarding their performance in the course.• Conduct respectful relationships with faculty, staff, and students both in and outside the classroom.• Maintain contact with the department chair and participate in meetings upon request.• Perform other duties as assigned. Job DutiesKnowledge Skills and Abilities• Ability to work with the director of the 3D Animation &amp; Game Design program to develop and deliver instruction on industry-standard skills in the field of 3DModeling;• Knowledge of game development industry norms and pipelines;• Must be knowledgeable and experienced in at least one industry-standard engine (preferably Unity or Unreal);• Ability to effectively learn and use instructional technology.• Willingness and flexibility to teach day, evening and weekend sections, as needed;• Ability to incorporate technology into teaching;• Ability to work effectively with individuals from diverse communities and cultures;• Employee shall adhere to all applicable rules and regulations of the University, the Conference, and the NCAA.Required EducationBFA or BS in Game Design, Game Programming, Computer Science, or Game Production.ORBachelor's Degree in relevant discipline. Note that education of less than Bachelor's Degree with at least five (5) additional years of significant experience in the field of modeling will be considered.Required Work ExperienceSignificant experience in the game development industry in the field of modeling.Preferred QualificationsBoth teaching and industry experience.Required Certifications, Licenses or RegistrationsN/A.Work HoursBased on course assignment.Physical DemandsTypical for faculty in this discipline.Posting Number: UN926POJob Type: Part TimeJob Category: FacultyDesired Start Date: 08/18/2025Position End Date (if temporary):Reports To: Dean, School of Media &amp; DesignSalary: $4000 lecture courses-$5000 studio courses or based on enrollmentOpen Date: 04/09/2025Close Date:Open Until Filled: YesSpecial Instructions to ApplicantNone.To apply, visit <a href="https://apptrkr.com/6309061UIW" target="_blank">https://apptrkr.com/6309061UIW</a> is committed to a policy of equal opportunity in employment, without regard to race, color, sex, sexual orientation, citizenship status, national origin, age, marital status, disability, genetic information, gender identity or expression, veteran status, pregnancy, and religion (except in limited circumstances when religious preference is both permitted by law and deemed appropriate as a matter of University policy).jeid-6f137e18493bcf459b9e048400c9d3de

ResponsibilitiesJob SummaryThis position is responsible for facilitating the implementation and maintenance of Environmental, Health, and Safety (EHS) systems, including Safety, Industrial Hygiene, Environmental, and Medical programs at the Howmet-Waco facility. The role ensures compliance with safety regulations, conducts audits, and provides training to promote a safe and healthy work environment.&nbsp; &nbsp;Responsibilities&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<ul> <li>Partner with Waco line organization regarding Howmet Aerospace standards and procedures to achieve a zero-incident workplace.</li> <li>Assist in implementing the EHS BU plan in accordance with the incident prevention and environmental programs.</li> <li>Coordinate with other BU sites as needed; assist with corporate initiatives &nbsp;</li> <li>Assess risk associated with manufacturing processes and act to minimize risks.</li> <li>Determine corrective actions as a result of hazards identification.&nbsp;</li> <li>Perform risk assessments.&nbsp;</li> <li>Lead and/or facilitate location EHS teams as assigned.</li> <li>Educate line organization personnel to ensure compliance with all EHS regulatory requirements and Howmet Aerospace standards.</li> <li>Provide specialized EHS expertise and assist in developing location knowledge of EHS regulations and corporate standards.</li> <li>Experience required in defining, obtaining, and coordinating necessary EHS reports, permits, communications, EHS self-assessments (ASATs) and FMEA program for the location.</li> <li>Develop and update EHS written policies, procedures, programs and safe work instructions.&nbsp;</li> <li>Incorporate Human Performance principles into assigned programs.</li> <li>Develop and facilitate EHS training.</li> <li>Assist in coordinating fire and other emergency drills.&nbsp;</li> <li>Assist the EHS SPAs with their programs and lead assigned programs to meet legal and other requirements.</li> <li>Provide a consistent presence on the production floor. Position requires boots on the ground for safety oversight.&nbsp;</li> <li>Attend leadership meetings as required.&nbsp;</li> <li>Review and submit EHS incidents into Incident Management System.&nbsp;</li> <li>Inspects the facility for signs of non-compliance; this includes housekeeping, blockage of emergency exits, incorrect use of equipment or safety accessories, etc.</li> <li>Ensure environmental and industrial hygiene sampling and monitoring compliance (Air, Water &amp; Soil) including but not limited to Asbestos, Lead, Microbiological (fungi &amp; Bacteria), IAQ, Metals, VOC’s, PCB’s and other materials as requested.</li> <li>Observes contractors for non-compliance issues.</li> <li>Application of OSHA, EPA,TECQ, NFPA, and ANSI standards.&nbsp;</li> <li>Support and provide insight for projects performed within the facility.&nbsp;</li> <li>Drive/provide continuous improvement initiatives.</li> <li>Monitor hygiene programs.&nbsp;</li> <li>This position may require occasional on-call availability to address urgent issues outside of regular business hours</li></ul>QualificationsQualificationsBasic&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<ul> <li>Bachelor’s degree from an accredited institution; degree preferred to be in Environmental Science, Occupational health and Safety, Engineering, or related field.</li> <li>3+ years of relevant experience in an EHS role</li> <li>Proficient in risk assessment</li> <li>Ability to conduct safety audits and investigations</li> <li>Data analysis skills</li> <li>Capacity to work collaboratively with different departments to implement safety measures and ensure compliance across an organization</li> <li>Minimum of two years of experience in managing and reporting on environmental programs in coordination with municipal authorities and the Texas Commission on Environmental Quality (TCEQ)</li> <li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li> <li>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status.&nbsp; ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.</li></ul>Preferred<ul> <li>Completed OSHA 511 1910&nbsp;</li> <li>Emergency Medical Training highly desirable (EMT-B, Medic, CPR Certification, etc.)</li> <li>Experience in performing boots on the ground safety oversight</li> <li>Experience with emergency response crews in incidents involving hazardous and non-hazardous material releases to air, soil and water&nbsp;</li> <li>Demonstrated strong propensity for hands-on work and attention to detail.</li></ul>About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Environmental, Health, and Safety (EHS) Engineer

Join the Clean Energy RevolutionBecome a Staff Software &amp; AI Engineer at Southern California Edison (SCE) and build a better tomorrow. In this job, you’ll be a hands-on software engineer with a strong track record of integrating AI capabilities into real-world solutions—leveraging tools like machine learning APIs, large language models, and low-code/no-code platforms to enhance product functionality and user experience. You are a strategic technical SME guiding multiple product and project teams. You’ll bring deep expertise across modern technology stacks and a broad understanding of the application ecosystem to deliver innovative, best-fit solutions. You’ll mentor engineers, solve complex business problems, and collaborate across teams to drive cross-functional success. As a key voice in our technical direction, you’ll influence innovation and ensure successful delivery of high-impact initiatives, and projects. As&nbsp;a&nbsp;Staff Software &amp; AI Engineer, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?<h4>Responsibilities</h4><ul><li>Using software engineering principles, build and deploy scalable, full-stack enterprise applications (using React, Angular, Node.js, Python, and Express, deployed on Azure, or GCP cloud platforms), mobile applications (using iOS Swift, React Native etc.) and low-code / no-code tools such as Power Platform.</li><li>Lead the design and implementation of AI-integrated solutions using technologies such as Azure OpenAI, Copilot Studio, and RAG architectures to build LLM-powered agents, voice-to-text, image-to-text capabilities and custom machine learning models.</li><li>Provide strategic technical guidance and define the technical vision for multiple product teams, aligning with enterprise architecture and driving consensus on complex technical decisions using software engineering principles.</li><li>Mentor and coach junior and senior developers through code reviews, pair programming, and continuous learning initiatives, promoting best practices in GitHub, CI/CD, and secure coding.</li><li>Promote AI adoption across the organization by identifying opportunities, conducting POCs, and integrating AI into SDLC, product management, and operations workflows using tools like Copilot and Power Platform AI.</li><li>Align with enterprise architecture on software engineering standards, DevOps practices, and reusable architectural patterns including microservices, serverless, and event-driven architectures and enforce them within DPT.</li><li>Collaborate with cross-functional stakeholders including enterprise architecture, product owners, UX designers, and business leaders to deliver well-structured, maintainable, and impactful features for MVPs.</li><li>Drive innovation by researching emerging technologies, proposing new tools and practices, and incubating ideas through rapid prototyping and MVP delivery using Design Thinking and Agile.</li><li>Conduct technical evaluations, impact assessments, and solution prototyping to support agile delivery and continuous improvement of engineering processes.</li><li>Manage change and risk across projects, ensuring alignment with business goals, regulatory requirements, and enterprise standards, including SOX and cybersecurity practices.</li><li>A material job duty of all positions within the Company is ensuring the protection of all its physical, financial and cybersecurity assets, and properly accessing and managing private customer data, proprietary information, confidential medical records, and other types of highly sensitive information and data with the highest standards of conduct and integrity. </li></ul><h4>Minimum Qualifications</h4><ul><li>Bachelor’s degree in Computer Science, Information Systems, or related field.</li><li>Ten or more years of hands-on full-stack enterprise scale experience in software development and delivery.</li><li>Two or more years of experience building, integrating and scaling AI solutions.</li><li>Five or more years of experience leading technical teams, mentoring and coaching other developers. </li></ul>Preferred Qualifications<ul><li>Three or more years of experience in building cloud-native solutions and deploying solutions on cloud-based architectures – Azure, GCP, and/or AWS and understanding of enterprise architectures.</li><li>Two or more years of experience building, integrating and scaling AI solutions.</li><li>Seven or more years of experience with modern front-end frameworks (React, Angular, etc) and back-end frameworks (Python, Node.js, Express, etc).</li><li>Two or more years of experience implementing AI for enterprise grade AI powered chatbots, multi-modal use-cases (voice-to-text, image-to-text) and understand various LLM models.&nbsp;</li><li>Understanding of Agentic AI use cases and end-to-end implementation of AI agents for productivity, automation, knowledge-mining, reporting etc., RAG architectures, and the latest protocols (MCP, A2A etc.) prompt engineering.</li><li>One or more years of experience integrating ML models (Computer vision, voice, NLP etc.) with solutions.</li><li>Two or more years of experience with rapid-prototyping and Product Innovation Lifecycle (Design Thinking, Ideation, Development, PoC, MVP, Scale).</li><li>Experience with Microsoft Power Platform (PowerApps, PowerAutomate, PowerBI).</li><li>One or more years of experience with mobile development (React Native, Cordova/PhoneGap, Swift, Java)</li><li>Three or more years of experience with DevOps, CI/CD pipelines.</li></ul>Additional Information<ul><li>This position’s work mode is&nbsp;hybrid.&nbsp;The employee will report to an SCE facility for a set number of days with the option to work remotely on the remaining days.  Unless otherwise noted, employees are required to work and reside in the state of California.  Further details of this work mode will be discussed at the interview stage. The work mode can be changed based on business needs.</li><li>Visit our&nbsp;Candidate Resource&nbsp;page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!</li><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. </li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.Southern California Edison is a proud Equal Opportunity Employer, including disability and protected veteran status. We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

Southern California Edison

Staff Software & AI Engineer

SciTec has been awarded multiple government contracts and is growing our creative Team! SciTec, Inc. is a dynamic small business with the mission to deliver advanced sensor data processing technologies and scientific instrumentation capabilities in support of National Security and Defense. We support customers throughout the Department of Defense and U.S. Government in building innovative new tools to deliver unique world-class data exploitation capabilities.Important Notice: SciTec exclusively works on U.S. government contracts that require U.S. citizenship for all employees. SciTec cannot sponsor or assume sponsorship of employee work visas of any type. Further, U.S. citizenship is a requirement to obtain and keep a security clearance. Applicants that do not meet these requirements will not be considered.We are seeking an experienced Machine Learning Engineer to join and help shape our new MLOps team. This role focuses on designing, developing and optimizing machine learning models for R&amp;D software development and the transition into operational environments. As part of the Future Systems team, you will have the opportunity to establish machine learning best practices and develop solutions to complex real-world problems across a variety of agencies.<h4>Responsibilities</h4><ul><li>Employ and evaluate high-performing ML models in simulation environments</li><li>Work collaboratively to design and develop ML approaches using cutting edge algorithms</li><li>Develop modular and flexible ML pipelines that ensure accuracy and reliability</li><li>Work with cross-functional teams, including Software Developers, Analysts, and DevOps, to integrate and enhance ML systems</li><li>Define touchpoints and handoffs with DevOps and Analysts to ensure seamless integration of ML workflows with existing infrastructure and data pipelines</li><li>Ensure developed pipelines and containers adhere to cybersecurity best practices including monitoring and logging</li><li>Mentor junior team members and contribute to building a collaborative and innovative team culture</li><li>Other duties as assigned</li></ul><h4>Requirements</h4><ul><li>Bachelor’s, Master’s, or PhD in Computer Science, Engineering, or a related technical field</li><li>5+ years developing ML solutions</li><li>Expertise in architecting Python applications for large-scale systems, mentoring junior engineers in Python best practices, and optimizing code for high performance</li><li>Familiarity with theoretical understanding of deep learning approaches, decision models, etc. </li><li>Advanced expertise in designing and optimizing ML workflows</li><li>Advanced expertise in designing workflows using MLflow, PyTorch or Tensorflow to streamline experimentation and production deployments</li><li>Strong problem-solving and analytical skills</li><li>Excellent communication and collaboration capabilities</li><li>Ability to thrive in a dynamic, fast-paced environment</li><li>Demonstrated attention to detail</li></ul>Preferred Qualifications<ul><li>Familiarity with C++ and/or Rust</li><li>Experience with distributed data processing frameworks such as PySpark</li><li>Experience with agentic learning models</li><li>Experience using MLOps frameworks and components (e.g. DVC, Horovod, Spark, ONNX, Parquet)</li><li>Familiarity with SQL and modern database technologies (e.g., MinIO, Yugabyte)</li><li>Understanding of secure software development practices and/or experience working in classified environments</li><li>Ability to build and manage scalable infrastructure using Kubernetes, Docker, and related tools</li></ul><ul><li>Relevant certifications </li></ul><h4>Benefits</h4>SciTec offers a highly competitive salary and benefits package, including:<ul><li>Employee Stock Ownership Plan (ESOP)</li><li>3% Fully Vested Company 401K Contribution (no employee contribution required)</li><li>100% company paid HSA Medical insurance, with a choice of 2 buy-up options</li><li>80% company paid Dental insurance</li><li>100% company paid Vision insurance</li><li>100% company paid Life insurance</li><li>100% company paid Long-term Disability insurance</li><li>Short-term Disability insurance</li><li>Annual Profit-Sharing Plan</li><li>Discretionary Performance Bonus</li><li>Paid Parental Leave</li><li>Generous Paid Time Off, including Holiday, Vacation, and Sick Pay</li><li>Flexible Work Hours</li></ul>The pay range for this position is $116,000- $168,000 / year. SciTec considers several factors when extending an offer of employment, including but not limited to the role and associated responsibilities, a candidate's work experience, education/training, and key skills. This is not a guarantee of compensation.SciTec is proud to be an Equal Opportunity employer. VET/Disabled.

SciTec

Senior Staff/Senior Machine Learning Engineer

Commitment to MissionThis job carries with it the obligation to uphold the Mission of Lone Star College (LSC) in carrying out the duties of the position. A commitment to positive interpersonal behaviors, professional communication, integrity, leadership, stewardship, respect and accountability to LSC students and employees is essential.Cultural Beliefs<ul><li>One LSC</li><li>Student Focused</li><li>Own It</li><li>Foster Belonging</li><li>Cultivate Community</li><li>Choose Learning</li></ul>The Chronicle of Higher Education's "Great Colleges to Work For®" is designed to recognize colleges that have been successful in creating great workplaces and to further research and understanding of the factors, dynamics and influences that have the most impact on organizational culture at higher education institutions.Lone Star College has been recognized in multiple categories.Campus Marketing StatementLone Star College-KingwoodLone Star College offers high-quality, low-cost academic transfer and career training education to 80,000+ students each semester. LSC has been named a 2023 Great Colleges to Work For® institution by the Chronicle of Higher Education. LSC consists of eight colleges, seven centers, eight Workforce Centers of Excellence and Lone Star Corporate College.Lone Star College-Kingwood, an innovative and dynamic community college located in the pine-forested suburbs of northeast Houston, has an opening for someone interested in working with a diverse group of colleagues who want to make a difference in the lives of students and grow professionally. Kingwood focuses on fulfilling individual dreams and enhancing community life and offers unique programs in respiratory care, computer gaming and dental hygiene.Location address is 20000 Kingwood Drive, Kingwood, TX 77339.Job DescriptionPURPOSE AND SCOPE:Under direct supervision, this position is responsible for routine lab preparation duties. May be responsible for tracking laboratory equipment and supplies. This position refers problems to experts as needed. Activities involve a variety of routine tasks such as cleaning makerspace, and many non-routine tasks that require independent judgment to resolve issues.ESSENTIAL JOB FUNCTIONS:<ul><li>Supports lab manager and faculty in preparation and delivery of labs</li><li>Assists students with lab equipment such as 3D printers, scroll saw, and soldering irons</li><li>Upholds safety practices in the lab</li><li>Provides routine lab support including all aspects of lab safety, cleaning, and organizing, and inspection and maintenance of lab classrooms including equipment and supplies needed for each class period</li><li>Performs record keeping for any supplies that need to be ordered and replaced</li><li>Works with faculty and students as needed, especially staffing Open Lab periods for student independent work; Ensures proper supplies and safety procedures during this time</li><li>Responsible for other reasonable, related duties as assigned</li></ul>KNOWLEDGE, SKILLS AND ABILITIES:<ul><li>Must be computer literate</li><li>Safety record and safety consciousness</li><li>Flexible and creative to perform multiple tasks simultaneously</li><li>Ability to work with a diverse group of faculty and staff</li></ul>PHYSICAL ABILITIES:The work is sedentary. Typically, the employee sits comfortably to do the work. However, there may be some walking; standing; bending; carrying of light items, such as papers, books, or small parts; or driving an automobile. No special physical demands are required to perform the work.WORK SCHEDULE AND CONDITIONS:<ul><li>Equipment used includes, PC workstation running on a LAN in a Microsoft Windows environment, calculator, phone and other general office equipment, and 3D printer, scroll saw, soldering irons, and basic shop equipment</li><li>Interface with internal and external contacts as needed to carry out the functions of the position</li><li>Work is performed in a climate-controlled office and/or laboratory environment with exposure to safety hazards typical in a laboratory (working with glue, paint, solder, 3D printers) </li><li>Safety protocol must be strictly followed at all times. Keep fans on for proper ventilation, use safety goggles, and properly dispose of batteries and other materials.</li><li>Work schedule is flexible around student class and work schedule, but priority will be given to staffing at peak demand times for engineering labs</li></ul>REQUIRED QUALIFICATIONS:<ul><li>High School Diploma or GED and at least 1 year of related work experience, or an equivalent combination of education and experience</li><li>Completion of appropriate college level science coursework</li></ul>SalaryHourly Pay Rate is $13.52Benefits Marketing StatementBy joining our top-notch institution, you will enjoy being a part of an organization that offers a supportive, collegial work environment, excellent work/life balance, tuition waiver, participation in a tax deferred retirement plan and more.Special InstructionsGo to the Job Search page, click on ‘My Activities’ at the top of the page. Under My Cover Letters and Attachments you will click on ‘Add Attachment.’ Please be sure to put the Job ID# in the title once you name your file for cover letters only, unless you attached your cover letter with your resume.If you are applying for an Instructional position (i.e. Faculty, Adjunct Faculty, Instructor), please ensure you include the following to be considered: Resume/CV, Cover Letter, Teaching Philosophy, and unofficial transcripts. You must limit your file name for any attachment to 40 characters or less.How to ApplyALL APPLICANTS MUST APPLY ONLINE ONLYWe will not accept application material received via fax, email, mail, or hand delivered.Postings for part-time and adjunct positions are active for the academic year. By selecting the option to receive notifications on your profile, you will begin receiving electronic communication regarding new opportunities with Lone Star College (LSC).If selected for an interview, a recruiter will contact you by phone, or email to schedule an interview.Lone Star College participates in the E-Verify program, under which Lone Star College provides the federal government with information from each new employee's Form I-9 to confirm that the employee is authorized to work in the United States.More information on the E-Verify program is available at <a href="http://www.dhs.gov/E-Verify" target="_blank">www.dhs.gov/E-Verify</a>.Lone Star College is an EEO Employer. All positions are subject to a criminal background check.

Part-Time Assistant II, Engineering Lab

Commitment to MissionThis job carries with it the obligation to uphold the Mission of Lone Star College (LSC) in carrying out the duties of the position. A commitment to positive interpersonal behaviors, professional communication, integrity, leadership, stewardship, respect and accountability to LSC students and employees is essential.Cultural Beliefs<ul><li>One LSC</li><li>Student Focused</li><li>Own It</li><li>Foster Belonging</li><li>Cultivate Community</li><li>Choose Learning</li></ul>The Chronicle of Higher Education's "Great Colleges to Work For®" is designed to recognize colleges that have been successful in creating great workplaces and to further research and understanding of the factors, dynamics and influences that have the most impact on organizational culture at higher education institutions.Lone Star College has been recognized in multiple categories.Qualities of ExcellenceAs faculty members of Lone Star College, we strive to create a nation of world citizenry in our students. In that pursuit, we model ways of thinking and being that incorporate diversity, equality, and equity. Our culture, then, requires the possession of transcendent qualities that, while immeasurable, are evident in global citizens. We are compassionate with our students, colleagues, and ourselves. We are innovative in the pursuit of learning. Ultimately, we create a culture where learning thrives, people are safe, and we mirror the qualities of world citizenry.Lone Star College faculty are dedicated to four qualities of excellence:<ul><li>Student Invested</li><li>Content Expert</li><li>Pedagogically Excellent</li><li>Institutionally Dedicated</li></ul>Campus Marketing StatementLone Star College-CyFairLone Star College offers high-quality, low-cost academic transfer and career training education to 80,000+ students each semester. LSC has been named a 2023 Great Colleges to Work For® institution by the Chronicle of Higher Education. LSC consists of eight colleges, seven centers, eight Workforce Centers of Excellence and Lone Star Corporate College.Located in suburban northwest Houston in the heart of the CyFair Community, the college provides a full range of offerings including unique programs in fire science technology, logistics management and sonography. Since opening our award winning campus in 2003, the college has experienced record growth and supports an exciting learning environment that brings together state-of-the-art technology and active, collaborative learning.Location address is 9191 Barker Cypress Road, Cypress, TX 77433.Job DescriptionPURPOSE AND SCOPE:It is the responsibility of the teaching faculty to provide the learning activities and support that will lead to the achievement of the course objectives and contribute to the educational environment of the college and the community. Primary responsibilities are to plan, develop and teach courses within the curriculum in a manner that facilitates student learning.Adjunct faculty are hired in a part-time capacity on a semester-by-semester basis, contingent upon the needs of the System. Lone Star College accepts application material year-round from qualified applicants willing to teach on a part-time basis. Adjunct (part-time) faculty hiring is based on student demand. We offer day, evening, and weekend classes. Classes are offered at various times and locations during the academic year. As a rule, adjunct faculty may teach a maximum of five classes per academic year.ESSENTIAL JOB FUNCTIONS:<ul><li>Teaches Engineering courses at a variety of times and locations</li><li>Creates engaging lessons that promote student involvement and application of the material.</li><li>Submits required college reports and forms in a timely manner</li><li>Utilizes a course syllabus for each course, following established institutional guidelines</li><li>Meets with and advises students either before or after class or by appointment, electronic communication, or other appropriate methods</li><li>Evaluates students to measure their progress in achieving course objectives and informs students in a timely manner of their progress</li><li>Maintains professional relationships with students, colleagues, and the community</li><li>Attends meetings, trainings, and orientations as required</li><li>Responsible for other reasonable related duties as assigned</li></ul>KNOWLEDGE, SKILLS, AND ABILITIES:<ul><li>Mastery of course content</li><li>Demonstrated leadership skills; Style that emphasizes collaboration, teamwork, and facilitation</li><li>Excellent oral and written communication skills and interpersonal skills</li><li>Ability to appreciate alternative viewpoints; Ability to work effectively with a wide variety of people</li><li>Demonstrates interest in interdisciplinary teaching, service learning, learning technologies, course development, and adult learning methodologies including collaborative learning, learning communities and distance learning</li><li>Commitment to academic excellence, exceptional service and providing a dynamic climate for life-long learning</li><li>Demonstrated ability to develop and implement instructional approaches such as service learning/civic engagement, learning communities, and the effective use of technology</li><li>Ability to use effective strategies to engage students in their learning</li></ul>PHYSICAL ABILITIES:The work is sedentary. Typically, the employee sits comfortably to do the work. However, there may be some walking; standing; bending; carrying of light items, such as papers, books, or small parts; or driving an automobile. No special physical demands are required to perform the work.WORK SCHEDULE AND CONDITIONS: <ul><li>Equipment used includes, PC workstation running on a LAN in a Microsoft Windows environment, calculator, phone and other general office equipment, and any specialized equipment standard within the discipline/industry</li><li>Interface with internal and external contacts as needed to carry out the functions of the position</li><li>Work is performed in a climate-controlled classroom and/or lab environment with minimal exposure to safety hazards</li><li>Hours will vary depending on class time; Instructors are required to meet with classes at all scheduled times and be available to students outside of class instruction</li></ul>REQUIRED QUALIFICATIONS:<ul><li>Master's degree in Engineering or a Master's degree with 18 graduate hours in Engineering</li></ul>Salary$58.05 per contact hour.Benefits Marketing StatementBy joining our top-notch institution, you will enjoy being a part of an organization that offers a supportive, collegial work environment, excellent work/life balance, tuition waiver, participation in a tax deferred retirement plan, professional development opportunities and more.Special InstructionsGo to the Job Search page, click on ‘My Activities’ at the top of the page. Under My Cover Letters and Attachments you will click on ‘Add Attachment.’ Please be sure to put the Job ID# in the title once you name your file for cover letters only, unless you attached your cover letter with your resume.If you are applying for an Instructional position (i.e. Faculty, Adjunct Faculty, Instructor), please ensure you include the following to be considered: Resume/CV, Cover Letter, Teaching Philosophy, and unofficial transcripts. You must limit your file name for any attachment to 40 characters or less.How to ApplyALL APPLICANTS MUST APPLY ONLINE ONLYWe will not accept application material received via fax, email, mail, or hand delivered.Postings for part-time and adjunct positions are active for the academic year. By selecting the option to receive notifications on your profile, you will begin receiving electronic communication regarding new opportunities with Lone Star College (LSC).If selected for an interview, a recruiter will contact you by phone, or email to schedule an interview.Lone Star College participates in the E-Verify program, under which Lone Star College provides the federal government with information from each new employee's Form I-9 to confirm that the employee is authorized to work in the United States.More information on the E-Verify program is available at <a href="http://www.dhs.gov/E-Verify" target="_blank">www.dhs.gov/E-Verify</a>.Lone Star College is an EEO Employer. All positions are subject to a criminal background check.

504 Engineering Jobs