field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

ResponsibilitiesUnder the direction of either the Chief Metallurgical Engineer/LAIP Quality Lead or Chief Quality Engineer/SAIP Quality Lead this position is responsible for providing process and material development, new product introduction, and product design services to ensure that the quality of forgings meet customer, governmental, and Howmet specifications. They provide technical support to metallurgical product and process controls to ensure Howmet remains a viable supplier in the industries that it serves. This position does not directly supervise other personnel. The incumbent communicates continually with all levels of personnel across all departments at Cleveland Operations, as well as with Quality Department personnel at other Howmet locations. Externally, they communicate with customers, suppliers, and contractors. &nbsp;Accountability ObjectivesResponsibilities include but are not limited to:<ul> <li>Providing product and process control support for all activities related to forgings.&nbsp;</li> <li>Coordinating and conducting assigned development programs to facilitate continuous improvement initiatives that lead to improved products, processes, and technology.</li> <li>Identifying cost-savings and process improvement projects and moving them from concept to implementation.&nbsp;</li> <li>Directing, developing, and maintaining processes, specifications, procedures, and equipment to meet customer specifications and Howmet quality requirements.&nbsp;</li> <li>Interfacing with customer representatives on Howmet product, process, and metallurgical quality issues.&nbsp;</li> <li>Monitoring and interfacing with outside suppliers for compliance to stated requirements including assigning, determining, and providing corrective actions, as required.&nbsp;</li> <li>Acting as project manager for multifunctional teams on process and product improvement activities.&nbsp;</li> <li>Assessing instability in forging processes through analysis of non-conforming material data.&nbsp;</li> <li>Utilizing stability tools for processes through analysis of non-conforming material data.&nbsp;</li> <li>Troubleshooting issues through validation of critical process variables and recipe management.&nbsp;</li> <li>Supporting operations to improve quality process reliability and improvement.&nbsp;</li> <li>Maintaining and improving floor level work instructions for process improvements, including improving line performance and quality throughput, reducing changeover times, reducing equipment downtime and scrap, improving the plant’s overall approach to preventative and predictive maintenance.&nbsp;</li> <li>Teaming with the Metallurgical Engineering, Estimating, Production, and Design Engineering Departments during new item design and launch to achieve first pass yield of 100% in FAI.&nbsp;</li> <li>Supporting efforts to train production staff on process basics including in-process inspection, indication recognition, and process stability.&nbsp;</li> <li>Establishing and improving work instructions to ensure the realization of EHS safety objectives. &nbsp;</li> <li>Troubleshooting, managing, and implementing technical inputs for incident investigation, root cause analysis, and corrective action.&nbsp;</li> <li>Assuming single point accountability for the Cleveland Operations Material Disposition Review (MDR) process, by making the appropriate decision and implementing the related process for each product whether that be reprocessing or scrapping, while adhering to Howmet quality standards, customer requirements, and ensuring cost and time savings.&nbsp;</li> <li>Performing other duties as assigned.&nbsp;</li></ul>QualificationsBasic QualificationsFor this position to be successful, the incumbent should have:<ul> <li>High School Degree or GED equivalent from an accredited institution, or minimum 3 years of process technician or process engineer experience.</li> <li>Minimum 3 years of experience in a metal manufacturing facility.&nbsp;</li> <li>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.&nbsp;</li></ul>Preferred QualificationsFor this position to be successful, preference is given to candidates with:<ul> <li>A Bachelor’s degree in Quality, Engineering, or a related field from an accredited institution.&nbsp;</li> <li>Minimum 3 years of experience working with product function, testing, design, continuous improvement, and process control tools including SPC, Control Plans, Gage R &amp; R’s, and other statistical techniques.</li> <li>Minimum 3 years of experience with statistical experimental design techniques.&nbsp;</li> <li>Previous experience in a unionized environment.</li></ul>Working ConditionsThis position involves minimal to moderate exposure to risk of accident and requires following basic safety precautions. Work is normally performed in a shared work environment divided between the shop floor and an interior work space. While not exposed to hazardous materials, this position requires wearing full PPE to protect from mobile equipment and hot materials when on the shop floor.&nbsp;This position requires anywhere from light to moderate physical activity, such as walking, sitting, and standing for extended periods of time, as well as some lifting and engaging all motions necessary to efficiency perform product and equipment inspections.&nbsp;This position also requires a willingness to maintain a flexible work schedule including working the occasional weekend and be responsive after normal working hours for support.&nbsp;About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

Process Engineer-Off Shift

AutoNation is one of the largest automotive retailers in the United States, offering innovative products, exceptional services, and comprehensive solutions, empowering our customers to make the best decisions for their needs. With a network of dealerships nationwide strengthened by a recognized brand, we offer a wide variety of new and used vehicles, customer financing, parts, and provide expert maintenance and repair services. Through DRV PNK, we have raised over $40 million for cancer-related causes, demonstrating our commitment to making a positive difference in the lives of our Associates, Customers, and the communities we serve. So what do you say? Are you ready to be part of something big?Here at AutoNation Ford Amherst, the AutoNation Experienced Sales Associate is responsible for selling new and used vehicles at gross profit, customer satisfaction and volume standards expected by America’s Largest Automotive Retailer.<h2>What are the requirements?</h2><ul><li>Proven ability to provide an exceptional customer experience</li><li>Drive to set targeted personal income goals consistent with AutoNation’s standards of productivity</li><li>Over 1 year automotive sales experience</li><li>Proven ability to exceed established automotive sales and customer service goals</li><li>Excellent communication, consultative, interpersonal and organizational skills</li><li>The willingness to follow up, and follow-up again, with customers</li><li>Valid in-state driver’s license and an acceptable, safe driving record</li><li>High school diploma or equivalent</li></ul><h2>&nbsp; Why should I work for AutoNation?</h2><ul><li>You want to work for a car dealer that has a strong moral compass and treats all its associates with respect</li><li>You’ll be empowered with the tools needed to support our customers’ needs and realize your earning potential. What tools? How’s a best-in-class CRM, state-of-the-art equity mining tools to help you uncover better sales leads, preferred relationships with over 30 lenders to get your customers financed and access to a national inventory of over 100,000 new and pre-owned vehicles so you can always find the perfect match for your customer.</li><li>We represent 36 brands in 16 states, so there’s always opportunity to grow your career as a Sales Associate and beyond. Join AutoNation and accelerate as far and fast as your talent and our support can take you.</li><li>How will I be paid? Will I receive training?</li><li>As an Experienced Sales Associate, you’re able to start working on our competitive commission pay plan right away!</li><li>Throughout your career, we’ll provide you with the hands-on, digital and classroom training you need grow and advance while also empowering you to build&nbsp;your book of business and close deals like the expert you already are.</li></ul><h2>Exciting Benefits and Perks Await You:</h2><ul><li>Competitive compensation and 401k matching</li><li>Enjoy a healthy work-life balance with insurance plans (health, dental, vision) and maternity benefits.</li><li>Associate purchase and discount programs for new and pre-owned vehicles, services, parts, collision, accessories, and AutoGear</li><li>Access amazing deals and discounts through YouDecide, a website with offers from top providers and retailers</li><li>Join our DRVPNK mission to raise and donate millions of dollars to cancer research and treatment, partnering with cancer charities nationwide</li></ul>AutoNation is committed to creating a diverse, equitable, and inclusive environment in our workplace and the services we provide. We welcome candidates from all backgrounds who are passionate about making a positive impact. Even if you do not meet every requirement, we encourage you to apply. Join our team and help us foster a culture of belonging while contributing to our revolutionary work in the automotive industry. We value innovation, teamwork, and a commitment to making a positive impact in the world.

AutoNation

Sales Retail Associate AutoNation Ford Amherst

ResponsibilitiesPrimary Purpose of JobUnder the direction of an Engineering Lead, this position is responsible for effecting workable solutions to engineering and production problems and solving those problems rapidly and with minimum operational interference. This position does not directly supervise other personnel. The incumbent communicates continually with all levels of personnel in the Maintenance, Planning, Production, Purchasing, Human Resources, Finance, and EHS Departments, as well as with Technical Supervisors and other Engineering &amp; Design Department personnel. Externally, they communicate with contractors, vendors, and suppliers.Accountability ObjectivesResponsibilities include but are not limited to:· Maintenance and Production Support:o Improving the overall safety of the plant’s equipment and processes.o Providing technical support for the maintenance of complex diagnostic procedures, training programs, preventative maintenance programs, and equipment breakdowns.o Provide troubleshooting support for plant equipment.o Providing specialized technical expertise for the application and use of mechanical technology for plant facilities and processes.o Planning, scheduling, and coordinating equipment installations.o Providing engineering and consultation services in terms of diagnosis and solutions to difficult operating and maintenance problems including performing root cause analysis with the goal of equipment reliability.o Provide continuous safe operation of mechanical equipment in area assigned by identifying potential issues and taking appropriate steps to suspend operation and provide repair solutions.o Training technical training and coaching for maintenance supervisors, and craft personnel in area assigned.· Project Management:o Driving continuous improvement activities to eliminate all waste, especially as it relates to equipment downtime, safety, work practices, and employee involvement.o Performing and/or directing the design, development, installation, cost control, and evaluation of complex engineering projects.o Writing and/or approving engineering specifications, designs, estimates, schedules, spare parts lists, quotations, requisitions, work orders, etc.o Developing and preparing Request for Authorizations RFAs to secure approval for capital engineering projects. Monitoring and managing these capital projects’ financial changes against the approved financial budget to avoid exceeding the authorized amount and expected timeline. Preparing documentation, such as engineering and project status reports, as required. Carry these capital projects from their conception through completion.· Engineering and Innovation:o Providing engineering innovations intended to increase productivity, reliability and availability of plant equipment and facilities, while observing the operating areas to maintain the knowledge of the current operating conditions.o Continuing to hone the craft of project management, engineering, and processes (project and reliability engineering) within assigned area of responsibility.· Performing other duties as assigned.QualificationsBasic QualificationsFor this position to be successful, the incumbent should have:· A Bachelor’s degree in Mechanical Engineering from an accredited institution with 5 or more years of experience.· Knowledge in design and project planning software such as AutoCAD, SolidWorks and/or Microsoft Project.· This position is subject to the International Traffic in Arms Regulations (ITAR), which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. ‘Green Card Holder’), Political Asylee, or Refugee.Preferred QualificationsFor this position to be successful, preference is given to candidates with:· A Project Management Certification (PMP).· 5 or more years of experience working in a heavy manufacturing environment.· Basic knowledge and understanding of industrial hydraulics, including the ability to read and understand hydraulic schematics and the ability to troubleshoot and problem solve hydraulic circuits.· The ability to effectively communicate (verbally and written) and delegate while maintaining forward motion on key deliverables.· A high degree of interpersonal skills to motivate and influence others, including those not under their direct supervision.· Demonstrated abilities of problem solving, systems thinking, project management, and team building.Working ConditionsThis position involves moderate exposure to risk of accident and requires following basic safety precautions. Work is normally performed in an interior work environment, while regularly accessing plant equipment for assessment. While not exposed to hazardous materials, this position requires wearing full PPE to protect from mobile equipment and hot materials when on the shop floor.This position requires moderate physical activity, such as all motions necessary to inspect production equipment in and out of confined spaces.This position also requires a willingness to maintain a flexible work schedule and travel both domestically and internationally, as requested.About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Mechanical Engineer

Sales Associate AutoNation Ford Amherst

ResponsibilitiesMaintenance &amp; Production Support:<ul> <li>Improving the overall safety of the plant’s equipment and processes.</li> <li>Providing technical support for the maintenance of complex diagnostic procedures, training programs, preventative maintenance programs, and equipment breakdowns.&nbsp;</li> <li>Performing root cause analysis with the goal to eliminate maintenance downtime.&nbsp;</li> <li>Planning, scheduling, and coordinating equipment installations.</li> <li>Providing engineering and consultation services in terms of diagnosis and solutions of difficult operating and maintenance problems.&nbsp;</li> <li>Training less experienced engineers, maintenance supervisors, and craft personnel</li></ul>Project Management:&nbsp;<ul> <li>Providing specialized technical expertise in the application and use of new technologies for plant facilities and processes.</li> <li>Participating in development of long range process and facilities planning, capital expenditure, and cost savings programs.&nbsp;</li> <li>Driving continuous improvement activities to eliminate all waste, especially as related to equipment downtime, safety, work practices, and employee involvement.&nbsp;</li> <li>Performing and/or directing the design, development, installation, cost control, and evaluation of complex engineering projects.&nbsp;</li> <li>Initiating new projects and carrying them through to completion.&nbsp;</li> <li>Writing and/or approving engineering specifications, designs, estimates, schedules, spare parts lists, quotations, requisitions, work orders, etc.</li> <li>Preparing RFAs, engineering reports, and project status reports.&nbsp;</li> <li>Working closely with other departments in Cleveland Operations and outside vendors to plan work activities.</li> <li>Engineering &amp; Innovation:</li> <li>Providing engineering innovations intended to increase reliability and availability of the plant facilities.&nbsp;</li> <li>Providing support on corporate engineering direction and policy decisions regarding engineering standards, equipment, and processes.</li> <li>Continuing to learn the craft of project management, engineering, and processes (project and reliability engineering) within their respectively assigned area of responsibility.&nbsp;</li> <li>Observing operating areas to maintain knowledge of current conditions.&nbsp;</li></ul>Performing other duties as assigned.QualificationsFor this position to be successful, the incumbent should have:<ul> <li>A Bachelor of Engineering or Bachelor of Science in Engineering from an accredited institution, or a minimum of 10 years’ experience in maintaining/repairing/installing combustion system.</li> <li>This position is subject to the International Traffic in Arms Regulations (ITAR), which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. ‘Green Card Holder’), Political Asylee, or Refugee.&nbsp;</li></ul>Preferred QualificationsFor this position to be successful, preference is given to candidates with:&nbsp;<ul> <li>The ability to effectively communicate (verbally and written) and delegate while maintaining forward motion on key deliverables.</li> <li>A high degree of interpersonal skills to motivate and influence others, including those not under their direct supervision.</li> <li>Demonstrated ability of problem solving, systems thinking, project managements, and team building. &nbsp;</li></ul>About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Sr. Combustion Engineer

ResponsibilitiesHowmet Aerospace is recruiting EHS Professionals to join our EHS Professional Development Program.&nbsp;Howmet is a world leader in the investment casting industry and is a leading supplier of superalloys, aluminum, and titanium components for aerospace, automotive, and commercial transportation applications. Howmet’s environmental, health, and safety values along with our leadership’s commitment provide successful candidates an excellent environment in which to work and deliver results. We have 23,000 employees in over 50 locations in 24 counties.&nbsp;Our EHS Development Program is designed to provide challenging professional-level EHS assignments to recent or upcoming graduates in Safety, Industrial Hygiene, Fire Protection or Environmental Science. Candidates will serve in a developmental role at a designated US location and will work with a designated mentor for a period of 12-18 months. During this time, candidates will learn our EHS Management Systems and culture and be exposed to driving EHS success in a Howmet location. As these positions provide extensive experience and visibility in a short timeframe, they serve as an excellent tool to prepare you for an EHS role in one of our operating locations following the completion of the program. This long-standing program has helped develop successful EHS professionals across our company. An ability and openness to relocation is necessary for entry into the program.Key Responsibilities of this position include:<ul> <li>Assist with development and implementation of EHS policy and procedures with focus on prevention, risk reduction, industrial hygiene, fire protection and environmental compliance.</li> <li>Conduct and complete assessments, develop procedures and conduct training.</li> <li>Conduct, document and resolve EHS self-assessments.</li> <li>Learn Howmet EHS Management Systems.</li></ul>Preferred Skills<ul> <li>Strong learning orientation and initiative.</li> <li>Strong planning, organizational, group facilitation, and presentation skills.</li> <li>Ability to interface with all levels of employees and organizational functions.</li> <li>Insatiable appetite for learning.</li> <li>Ability to re-locate upon completion of the program in 12-18 months.</li></ul>QualificationsMinimum Qualifications&nbsp;<ul> <li>Bachelor’s Degree from an accredited university in an Environmental, Health, Safety or Fire Protection Engineering.</li></ul>Salary Range<ul> <li>$65k-$75k/year approximation (Actual compensation is subject to variation due to factors such as education, experience, skillset, and/or location).</li></ul>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. &nbsp;ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'). Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.&nbsp;Relocation assistance provided. Expected travel is less than 5%.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Environment, Health, & Safety (EHS) Professional

Responsibilities Job Summary STRONG INTERNAL CANDIDATE IDENTIFIEDHowmet Aerospace has an immediate opening for a Tooling Business Center Job Leader - Inspection in our Tooling Business Center&nbsp;at our&nbsp;Engines Products - Cleveland Operations Tempcraft facility&nbsp;located at 3960 S. Marginal Rd. in Cleveland. This position is responsible for training, scheduling, and providing quality support to ensure customer requirements are met prior to shipment. This position will drive standard inspection methods at both Tempcraft locations (Cleveland and Brecksville).Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. Job Requirements Tooling Business Center Job Leader – Inspection&nbsp;will be required to:<ul> <li>Schedule will include working weekends, and overtime will be frequently available to ensure job tasks dates are being achieved.</li> <li>Mentor/train inspection employees and support team members to ensure quality and delivery dates are met.</li> <li>Review and evaluate Bluelight Inspection data to determine action plans as needed to deliver quality tool.</li> <li>Be respect and collaborative with peers, supervisors, and other personnel.</li></ul>Qualifications Job Responsibilities The job responsibilities and duties may include, but are not limited to, the following elements:Responsible for leading the construction of several products concurrently.·&nbsp; &nbsp; &nbsp;Schedule, provide training/mentorship and coordinate daily activities for the Inspection Department,<ul> <li>Lead multiple tools and effectively coordinate with support resources (machinists, EDM, inspection, etc.…)</li> <li>Interpret design blueprints and electronic models to determine inspection results and plan.</li></ul>·&nbsp; &nbsp; &nbsp;Perform operations within very close tolerances.·&nbsp; &nbsp; &nbsp;Ability to work with Engineering, Programming and Operations throughout the manufacturing process<ul> <li>Ensure Final Quality Review (FQR) is being performed and complete.</li> <li>Comply with Corporate EHS, Quality and HR rules and standards</li></ul> Job Specifications Basic Qualifications:<ul> <li>Minimum of 5 years of experience with GOM/ATOS, including analyzing of data.&nbsp;</li> <li>Minimum of 5 years’ experience in the construction of turbine/airfoil molds and dies.&nbsp;</li></ul>·&nbsp; &nbsp; &nbsp;Ability to lead and effectively train other inspectors to analyze bluelight data.Preferred Qualifications:·&nbsp; &nbsp; &nbsp;Ability to effectively work / communicate as part of a team.·&nbsp; &nbsp; &nbsp;Thorough knowledge of the tooling process.<ul> <li>Ability to lead and effectively train other inspectors to analyze BlueLight data.</li></ul>About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Tooling Business Center Inspection Job Leader

At Texas Roadhouse, we are a people-first company that just happens to serve steaks. Legendary Food and Legendary Service is who we are. We’re about loving what you’re doing today and preparing you for what you’ll be doing tomorrow. Are you ready to be a Roadie?Texas Roadhouse is looking for a Dishwasher who works well with others while following sanitation guidelines in the kitchen.As a Dishwasher your responsibilities would include:<ul><li>Operating the dish machine</li><li>Supervising proper rinse and wash temperatures</li><li>Changing water, storing, and using dish chemicals properly</li><li>Setting up and organizing the dish racks</li><li>Removing trash</li><li>Maintains proper safety and sanitation practices</li><li>Exhibits teamwork</li></ul>If you think you would be a legendary Dishwasher, apply today!At Texas Roadhouse, our Roadies are the heart and soul of our company. &nbsp;We have a fun culture with flexible work schedules, discounts in our restaurants, friendly competitions, recognition, formal training, and career growth opportunities.Our Roadies are paid weekly. In addition, we offer one of the industry’s most competitive total rewards packages after one year of service to Roadies that meet our benefit eligibility requirements. The total rewards package includes, but is not limited to, the following:<ul><li>A choice of medical plans that are best in class</li><li>Dental and Vision Insurance</li><li>Tuition Reimbursement up to $5,250 annually</li><li>Paid vacation time</li><li>Short-Term Disability</li><li>Life, Accident, and Critical Illness insurance</li><li>Identity Theft Protection</li><li>Employee Assistance Program</li><li>Business Travel Insurance</li><li>Annual holiday bonus</li></ul>We are proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, age, gender, pregnancy, gender identity, disability, veteran status, sexual orientation, citizenship, national origin, or any other legally-protected status. We encourage and welcome all applicants to apply.

Texas Roadhouse

Dishwasher

At Texas Roadhouse, we are a people-first company that just happens to serve steaks. Legendary Food and Legendary Service is who we are. We’re about loving what you’re doing today and preparing you for what you’ll be doing tomorrow. Are you ready to be a Roadie?Texas Roadhouse is currently looking for a legendary Local Store Marketer (LSM) who can help build sales at the local level through establishing relationships within the community and increasing guest loyalty. If you have a passion for networking and being creative, apply today!As a Local Store Marketer your responsibilities would include:<ul><li>Assisting the Managing Partner and management team with the creation, development, and implementation of local store marketing programs that build guest loyalty, guest counts, check average, and overall sales</li><li>Helping promote all Texas Roadhouse in-house promotions (Great Steak, Rib Fest, Gift Cards, etc.)</li><li>Building relationships during food and bread runs with businesses, hotels, radio stations, etc.</li><li>Helping establish positive and ongoing business relationships with neighboring retailers, hotels, civic groups, etc.</li><li>Helping develop and execute ongoing charitable and community events that position Texas Roadhouse as a community leader and build brand awareness</li><li>Assisting in all public relation efforts including cooking segments, media releases, and publicity events that promote Texas Roadhouse</li><li>Communicating frequently with the Managing Partner, management team, and all employees (through Alley Rallies, etc.) about ongoing programs, plans, and results</li></ul>At Texas Roadhouse, our Roadies are the heart and soul of our company. We have a fun culture with flexible work schedules, discounts in our restaurants, friendly competitions, recognition, formal training, and career growth opportunities.Our Roadies are paid weekly. In addition, we offer one of the industry’s most competitive total rewards packages after one year of service to Roadies that meet our benefit eligibility requirements.The total rewards package includes, but is not limited to, the following:<ul><li>A choice of medical plans that are best in class</li><li>Dental and Vision Insurance</li><li>Tuition Reimbursement up to $5,250 annually</li><li>Paid vacation time</li><li>Short-Term Disability</li><li>Life, Accident, and Critical Illness insurance</li><li>Identity Theft Protection</li><li>Employee Assistance Program</li><li>Business Travel Insurance</li><li>Annual holiday bonus</li></ul>We are proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, age, gender, pregnancy, gender identity, disability, veteran status, sexual orientation, citizenship, national origin, or any other legally-protected status. We encourage and welcome all applicants to apply.

92 Jobs in Elyria, OH 44035, USA