field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Position Purpose: Provides day-to-day monitoring and basic plant and pump/booster station operations, routine lab tests and basic corrective and preventative maintenance activities. Primary Duties/Responsibilities: <ul><li>Operates equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures. Monitors and observes operating conditions, records observations and data in shift log. Diagnoses basic operational problems and takes corrective action per procedure.</li><li>Performs routine CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment which may include pumps, engines, centrifuges, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed, odor control, disinfection equipment, vacuum filters and belt presses. Reports and documents results of work performed and enters into appropriate database. Promptly reports any operational problems with machines or equipment to Lead or Supervisor.</li><li>Collects water, wastewater, industrial waste, groundwater, sludge, residuals and/or gas samples according to schedule. Performs field tests (chemical, physical and biological) in order to pace chemical dosages for process and odor control units. Prepares chemical solutions, monitors supplies and recommends reorder.</li><li>Performs routine lab tests and prepares reports per procedure.</li><li>Performs routine instrument calibration for portable meters including, but not limited to, dissolved oxygen, pH, H2S, percent oxygen, lower explosive limit.</li><li>Learns to inspect and becomes proficient at mechanical troubleshooting to determine repairs needed. Dismantles equipment to gain access to and repairs defective parts using hand tools, power tools and precision measuring and testing devices. Re-assembles and tests equipment ensuring safe and efficient operating condition is restored. Learns to troubleshoot hydraulic, pneumatic and electronic equipment and instrumentation.</li><li>Performs manual labor including cleaning equipment, facilities and grounds as required and properly disposes of waste according to safety and environmental policies. Operates vehicles, mobile equipment and material handling equipment for operational and maintenance purposes.</li><li>Performs facility maintenance and repair and may replace or install light bulbs, fluorescent tubes, damaged glass, windows, doors, partitions, ceiling or floor tiles, door locks, carpet, and/or paint.</li><li>Learns to estimate time and material costs for various projects. May assist in other areas of facility as directed.</li></ul> Work Environment: <ul><li>Spends 100% of the time in operations environment.</li><li>Typically spends 25 - 35% of time exposed to outdoor and sometimes inclement weather.</li><li>Company service vehicles are used as required.</li><li>Travels 1 - 2 times per year for company provided training.</li><li>May be required to travel up to five consecutive days.</li><li>May serve rotational 24-hour emergency on-call.</li><li> Possible Work Hazards : May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards.</li></ul> Qualifications Education/Experience/Background: <ul><li>High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions.</li><li>Six months to two years of experience in a related position with experience in a similar environment preferred with ability to comprehend specifications, blueprints and manuals.</li><li>Experience using material handling equipment, pressure gauges and precision measuring instruments.</li><li>Experience using power, pneumatic, hydraulic and hand tools and shop tools such as drill press, band saw, bench grinder, torque wrench preferred.</li></ul> Knowledge/Skills/Abilities: <ul><li>Ability to perform basic mathematical calculations.</li><li>Some vocational training and mechanical aptitude preferred, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment.</li><li>Must have the ability to diagnose basic and routine process and mechanical problems and take remedial corrective action.</li><li>Must have basic computer skills and have ability to operate programs for process control, the Computer Maintenance Management System, and laboratory/industrial pretreatment QA/QC.</li><li>Must consistently demonstrate the ability to learn and independently perform assigned duties and meet or exceed production and quality goals.</li><li>Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily.</li><li>Must be able to serve rotational 24-hour emergency on-call if required by site.</li></ul> Required Certification/Licenses/Training: <ul><li>Minimum water/wastewater license as required by regulatory agency at site.</li><li>Must possess a valid driver's license and a safe driving record.</li><li>Employee Orientation, Departmental Operating Procedures, Safety, OSHA and Quality Training.</li><li>HAZWOPER (Hazardous Waste Operations and Emergency Response) Level I and II First Responder Certification if required by site.</li><li>Obtain and maintain minimum water / wastewater operator state certification.</li><li>Must become proficient in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, gas detectors, confined space equipment, etc.)</li><li>Forklift Certification if required by site.</li><li>Training in operation of mechanical drives, hydraulic pumps and valves, pneumatics, electronics and control systems.</li><li>Obtain HVAC, Electrician, Plumber's or other trade License if assigned to that area.</li><li> Note : Tech will not perform duties unless properly licensed.</li><li>Training in the use of energy management systems as needed.</li><li>Works toward increasing skills in additional functional areas or in obtaining advanced skills / maintenance certifications.</li><li>May perform more advanced functions as part of training and development.</li></ul> Physical Requirements: <ul><li>Amount of time spent - Standing 25%, Walking 75% for as many as five miles per shift.</li><li>Requires close visual and hearing observation to detect non-conformance and machine malfunction.</li><li>Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms.</li><li>Works in various positions; works on ladders, catwalks, and supports at heights of 50 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds.</li><li>Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 10 feet.</li><li>Occasional stooping, bending or kneeling and entering confined spaces.</li></ul> Additional Information Pay Range: $20.00 to $25.00 per hour. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

O&M Technician I

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Position Purpose: Provides day-to-day monitoring and basic plant and pump/booster station operations, routine lab tests and basic corrective and preventative maintenance activities. Primary Duties/Responsibilities: <ul><li>Operates equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures. Monitors and observes operating conditions, records observations and data in shift log. Diagnoses basic operational problems and takes corrective action per procedure.</li><li>Performs routine CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment which may include pumps, engines, centrifuges, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed, odor control, disinfection equipment, vacuum filters and belt presses. Reports and documents results of work performed and enters into appropriate database. Promptly reports any operational problems with machines or equipment to Lead or Supervisor.</li><li>Collects water, wastewater, industrial waste, groundwater, sludge, residuals and/or gas samples according to schedule. Performs field tests (chemical, physical and biological) in order to pace chemical dosages for process and odor control units. Prepares chemical solutions, monitors supplies and recommends reorder.</li><li>Performs routine lab tests and prepares reports per procedure.</li><li>Performs routine instrument calibration for portable meters including, but not limited to, dissolved oxygen, pH, H2S, percent oxygen, lower explosive limit.</li><li>Learns to inspect and becomes proficient at mechanical troubleshooting to determine repairs needed. Dismantles equipment to gain access to and repairs defective parts using hand tools, power tools and precision measuring and testing devices. Re-assembles and tests equipment ensuring safe and efficient operating condition is restored. Learns to troubleshoot hydraulic, pneumatic and electronic equipment and instrumentation.</li><li>Performs manual labor including cleaning equipment, facilities and grounds as required and properly disposes of waste according to safety and environmental policies. Operates vehicles, mobile equipment and material handling equipment for operational and maintenance purposes.</li><li>Performs facility maintenance and repair and may replace or install light bulbs, fluorescent tubes, damaged glass, windows, doors, partitions, ceiling or floor tiles, door locks, carpet, and/or paint.</li><li>Learns to estimate time and material costs for various projects.</li><li>May assist in other areas of facility as directed.</li></ul> Work Environment: <ul><li>Spends 100% of the time in operations environment.</li><li>Typically spends 25 - 35% of time exposed to outdoor and sometimes inclement weather.</li><li>Company service vehicles are used as required.</li><li>Travels 1 - 2 times per year for company provided training.</li><li>May be required to travel up to five consecutive days.</li><li>May serve rotational 24-hour emergency on-call.</li><li> Possible Work Hazards : May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards.</li></ul> Qualifications Education/Experience/Background: <ul><li>High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions.</li><li>Six months to two years of experience in a related position with experience in a similar environment preferred with ability to comprehend specifications, blueprints and manuals.</li><li>Experience using material handling equipment, pressure gauges and precision measuring instruments.</li><li>Experience using power, pneumatic, hydraulic and hand tools and shop tools such as drill press, band saw, bench grinder, torque wrench preferred.</li></ul> Knowledge/Skills/Abilities: <ul><li>Ability to perform basic mathematical calculations.</li><li>Some vocational training and mechanical aptitude preferred, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment.</li><li>Must have the ability to diagnose basic and routine process and mechanical problems and take remedial corrective action.</li><li>Must have basic computer skills and have ability to operate programs for process control, the Computer Maintenance Management System, and laboratory/industrial pretreatment QA/QC.</li><li>Must consistently demonstrate the ability to learn and independently perform assigned duties and meet or exceed production and quality goals.</li><li>Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily.</li><li>Must be able to serve rotational 24-hour emergency on-call if required by site.</li></ul> Required Certification/Licenses/Training: <ul><li>Minimum water/wastewater license as required by regulatory agency at site.</li><li>Must possess a valid driver's license and a safe driving record.</li><li>Employee Orientation, Departmental Operating Procedures, Safety, OSHA and Quality Training.</li><li>HAZWOPER (Hazardous Waste Operations and Emergency Response) Level I and II First Responder Certification if required by site.</li><li>Obtain and maintain minimum water / wastewater operator state certification.</li><li>Must become proficient in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, gas detectors, confined space equipment, etc.)</li><li>Forklift Certification if required by site.</li><li>Training in operation of mechanical drives, hydraulic pumps and valves, pneumatics, electronics and control systems.</li><li>Obtain HVAC, Electrician, Plumber's or other trade License if assigned to that area.</li><li>Note: Tech will not perform duties unless properly licensed.</li><li>Training in the use of energy management systems as needed.</li><li>Works toward increasing skills in additional functional areas or in obtaining advanced skills / maintenance certifications.</li><li>May perform more advanced functions as part of training and development.</li></ul> Physical Requirements: <ul><li>Amount of time spent - Standing 25%, Walking 75% for as many as five miles per shift.</li><li>Requires close visual and hearing observation to detect non-conformance and machine malfunction.</li><li>Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms.</li><li>Works in various positions; works on ladders, catwalks, and supports at heights of 50 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds.</li><li>Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 10 feet.</li><li>Occasional stooping, bending or kneeling and entering confined spaces.</li></ul> Additional Information Pay Range $40.00 to $50.00 per hour. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Position Purpose: Responsible for working on Household Hazardous Waste collection events or events similar in nature between the months of April and November. Work will mostly be completed on Saturdays. Employee is responsible for maintaining a professional image while adhering to all VESTS Health and Safety policies and procedures Primary Duties/responsibilities: <ul><li>Unload materials from vehicles, trucks and pick-ups.</li><li>Able to recognize potentially dangerous situations relating to chemical handling. </li><li>Able to consistently follow all compliance, health and safety, and procedures in accordance with departmental and regional policies.</li><li>Fosters a proper company image to customers' regular interaction in a professional manner.</li><li>Ability to follow directions and work as part of a team in a changing job environment.</li><li>Work in a safe manner.</li></ul> Qualifications Education / Experience / Background: <ul><li>High School Diploma required</li><li>Hazardous waste experience preferred</li></ul> Knowledge / Skills / Abilities: <ul><li>Ability to act in a professional manner at all times</li><li>Strong team player</li><li>Ability to effectively follow direction</li><li>Ability to work in a changing job environment</li><li>Able to lift 50 lbs and stay on your feet for extended periods.</li></ul> Required Certification / Licenses / Training: <ul><li>A valid Driver's License </li><li>40-hour HAZWOPER Certification preferred</li></ul> Additional Information Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

HHW Technician- Part Time

<h4>Industrial Controls Engineer</h4>Time type: full timePosted on: June 30, 2025Job requisition id: R5024What we need We are looking for an Industrial Controls Engineer to join our Industrial Automation team within our Industrial Controls organization. This position will report to the Manager, Industrial Controls Engineering and will play an important part in driving the execution of the PLC (Programmable Logic Controllers) development and implementation.&nbsp;What we do The Industrial Automation team is part of the Industrial Controls organization which develops products for our warehouse automation systems. With a proven track record in industrial control specification, design implementation, standard engineering practices and documentation; their mission is to research new platforms, utilize advanced hardware, and push the limits of technology to build a world-class automation platform that minimizes development time, reduces commissioning time, and eliminates unplanned downtime.What you’ll do <ul><li>Gather information and validate requirements to execute root cause analysis to resolve issues with internal and external stakeholders.</li></ul><ul><li>Provide new control system functionalities and modify existing solutions which include PLC and HMI.</li></ul><ul><li>Document equipment configuration, system functionality and features, and Industrial Controls team processes and procedures.</li></ul><ul><li>Collaborate with Release management and perform PLC and HMI updates for the customer, on-site or remotely.</li></ul><ul><li>Elaborate test strategies and perform tests using a framework to validate logic and SCADA changes.</li></ul><ul><li>Execute test plan, generate test reports, and demonstrate compliance with requirements.</li></ul><ul><li>Support customers to address unforeseen issues.</li></ul><ul><li>Participate in peer reviews.</li></ul><ul><li>Contribute to and potentially lead process improvement initiatives. </li></ul>What you’ll need <ul><li>Bachelor’s degree in Electrical Engineering, Controls Engineering, Computer science or in a related discipline</li></ul><ul><li>Knowledge of Power Systems to design drive controls.</li></ul><ul><li>Experience with AC/DC Drive Control Architecture</li></ul><ul><li>Minimum 2 years in Design &amp; Implementation of Industrial Control systems using PLCs, HMIs, and Drives</li></ul><ul><li>Minimum 2 years of Programming PLCs, HMIs, and related equipment for Industrial Control Systems (Rockwell products preferred)</li></ul><ul><li>Minimum 2 years’ experience with automated systems engineering</li></ul><ul><li>Experience programming Rockwell PLC’s (ControlLogix, GuardLogix)</li></ul><ul><li>Knowledge of Industrial networks</li></ul><ul><li>Experience developing and programming Human Machine Interface (Ignition 8, FactoryTalk ME/SE)</li></ul><ul><li>Able to understand and read electrical and mechanical schematics.</li></ul><ul><li>Strong background in troubleshooting complex automated system.</li></ul><ul><li>Experience with JIRA and agile methodology.</li></ul><ul><li>Knowledge of Rockwell and Inductive Automation products is a plus.</li></ul>Our environment <ul><li>Travel approximatively 40% to various customer locations (Canada and United States). </li></ul><ul><li>The employee is responsible for owning a credit card and managing expenses personally to be reimbursed on a bi-weekly basis.</li></ul>#LI-Remote#LI-EJ1 Apply Now

Symbotic

Industrial Controls Engineer

Description Idaho National Laboratory is hiring a Power Systems Engineer to work on our Infrastructure Security team. Our team works a 9x80 schedule located out of our Idaho Falls facility with every other Friday off. You will participate in state-of-the-art grid technology research within the sub-discipline of electrical engineering that deals with power systems, specifically electric power transmission and distribution, power conversion, and electromechanical devices. You will report to the manager for our Infrastructure Security department manager. You will support multiple projects organized to identify novel grid enhancements, promote strategies for grid reliability and performance, and to protect the grid from threats including cyber, physical, and all-hazards. Responsibilities Include: <ul><li>Select, apply, and integrate engineering principles, theories, concepts, and technologies with complex engineered systems.</li><li>Perform and lead independent and team research into increasing the capacity, safety, performance, and reliability of energy systems.</li><li>Prepare and contribute to technical reports, publications, and presentations at conferences, technical meetings and project reviews.</li><li>Determine or approve the technical approach for the development and testing of engineered solutions.</li><li>Lead reviews of scope, requirements, designs, codes, documentation, and deliverables.</li><li>Develop ideas and produce proposals for new work including joint projects with industry. </li><li>Develop physics-based mathematical models of mechanical, chemical, and electrical systems to support and verify design.</li></ul><ul><li>Collaborate and partner with other government agencies, other national laboratories academia, and private sector companies to achieve project goals.</li><li>Maintain technical skills and other capabilities to support the INL mission. Stay informed about developments in industry and maintain skills and contribute to the development of new principles.</li><li>Develop design documentation, maintenance and configuration of power systems, and research and development of advanced power control or measurement techniques.</li><li>Apply engineering principles to monitor and evaluate condition and operational performance of power infrastructure, recommendation of maintenance standards and procedures, identification of vendor data parts, and planning for upgrades.</li><li>Apply engineering principles to the development of operational power systems and may include the development of software and hardware.</li><li>Perform research and development activities including the advancement of power measurement or control techniques, such as state estimation or automated metering, for improving the security, efficiency and reliability of the power system infrastructure.</li><li>Mentor junior staff and look for opportunities to involve them in current projects.</li></ul>Qualifications Minimum Requirements: <ul><li>Level 3: Bachelor’s degree in electrical engineering or directly related field and 5 years of experience or a Master’s degree in electrical engineering or directly related field and 2 years of experience</li><li>Level 4: Bachelor’s degree in electrical engineering or directly related field and 9 years of experience or a Master’s degree in electrical engineering or directly related field and 6 years of experience.</li><li>5 years of hands-on experience with design and implementation of complex power systems within a utility or power generation company.</li></ul><ul><li>This position requires the ability to obtain and maintain a Department of Energy&nbsp; "Q" clearance, which requires US Citizenship.&nbsp;</li></ul> Ideal Candidate Experience: <ul><li>Ability to perform independent research and methods development.</li><li>Demonstrated technical understanding, research collaborations, and professional recognition in relevant field is required. This can be demonstrated through peer-reviewed publications, patents, technical reports, or other forms of professional recognition.</li><li>Expertise in power systems, data management, and configuration management. Applies expertise in application of principles, theories, and concepts in development of complex power systems.</li></ul> Job Information:&nbsp; <ul><li>The pay range for this position is: Level 3 ($91,008 - $186,588 ) / Level 4($109,260 - $223,908&nbsp; ). At Idaho National Laboratory compensation decisions are determined using factors such as education, relevant experience, and other credentials.</li><li>Multi-Level: This is a multi-level posting and you will be placed at the appropriate level dependent on depth and breadth of proven experience and skills.</li></ul> Physical Requirements: While performing the duties of this classification, the employee may be required to stand, walk, sit, stoop, kneel, bend, use hands to handle materials, manipulate tools, keyboard, and type, reach with hands and arms, and operate job-related equipment. The employee may occasionally lift and/or move up to 50 pounds with assistance. Sufficient visual acuity and hearing capacity to perform the essential functions and interact with the public is required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Benefits and Relocation <ul><li>Medical, Dental, Vision, and Flexible Spending Accounts</li><li>401(k) with a 4.2% employer contribution and up to 4.8% match</li><li>Paid time off (personal leave)</li><li>Employee Education Program (tuition assistance)</li><li>Comprehensive Relocation Package</li><li>Benefit eligibility subject multiple factors, including employment status and position classification.</li></ul> INL is a science-based, applied engineering national laboratory dedicated to supporting the U.S. Department of Energy’s mission in nuclear energy research, science, and national defense. With more than 5,000 scientists, researchers, and support staff, the laboratory works with national and international governments, universities and industry partners to discover new science and development technologies that underpin the nation’s nuclear and renewable energy, national security, and environmental missions. INL Mission Our mission is to discover, demonstrate and secure innovative nuclear energy solutions, other clean energy options and critical infrastructure. INL Vision Our vision is to change the world’s energy future and secure our nation’s critical infrastructure. Selective Service Requirements To be eligible for employment at INL males born after December 31, 1959 must have registered with the Selective Service System (SSS). For more information see <a href="http://www.sss.gov" target="_blank">www.sss.gov</a>. Equal Employment Opportunity Idaho National Laboratory (INL) is an Equal Employment Opportunity (EEO) employer. It is the policy of INL to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information.&nbsp; Reasonable Accommodation We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Other Information When applying to positions please provide a resume and answer all questions on the following screens. Applicants, who fail to provide a resume or answer the questions, may be deemed ineligible for consideration. INL does not accept resumes from third party vendors unsolicited.

Idaho National Laboratory

Power Systems Engineer

ResponsibilitiesPosition is responsible for the quality of parts from purchase order to shipping at Winsted’s operations.&nbsp; Tasks as required, are performed to warrant the processing of parts to customers purchase orders, specifications and engineering drawings.JOB FUNCTIONSDevelops and initiates standards and methods for inspection, testing and evaluation.Communicates customer purchase order information to supply chain internally and externally.Develops and implements methods and procedures for disposition of discrepant material and devises methods to assess cost and responsibility.Guides workers engaged in measuring, inspecting and testing product and tabulating data concerning materials, products, or process quality and reliability.Prepare process approval requests and prepare first article data and characteristic accountabilityInterface with customers and suppliers on specifications, problems and deviate material.Response to customer corrective actions as required and issues corrective actions to suppliers as needed.Perform various audit functions.Reviews customer purchase orders and specifications and drawings.Support shop floor manufacturing cells as required.Responsible for area records and procedures for AS9100.Reviews internal work instructions.Actively participate, promote and comply with all EHS programs and policies.May act as custodian for MRB and issues applicable reports.Performs other duties as assigned.QualificationsJOB QUALIFICATIONSBasic Qualifications&nbsp;Bachelor’s degree in engineering, manufacturing or quality managementPreferred Qualifications1 to 2 years of experience in a manufacturing environment.Aerospace manufacturing experienceSix Sigma Green Belt or Black BeltCQESkills and Abilities:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Demonstrated leadership of cross-functional product teams•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Self-driven – ability to organize people and activities to get things done.•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Interpersonal savvy and communication skills (written and verbally)•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Organizational skills and attention to detail•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Problem-solving ability•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Computer literate (Microsoft Office Suite, Project)About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Howmet Aerospace

Quality Engineer

ResponsibilitiesFacilities Mechanical Engineer&nbsp;This opening is with Howmet Aerospace – a world leader in investment casting of superalloys, aluminum and titanium primarily for jet aircraft and industrial gas turbine markets. For more information about Howmet Aerospace, visit us online at&nbsp;<a href="http://www.howmet.com/" target="_blank">www.howmet.com</a>.Howmet has challenging opportunities for individuals who are excited to engage with us in growing our business. Join us where you will be part of a dedicated team manufacturing&nbsp;high tech products, safely, accurately, and efficiently.This position will report directly to the Facility Engineering Team Leader and will be responsible for providing engineering services to safely meet the location’s business plan by providing engineering support to production, maintenance, and administrative departments to achieve plant goals.Job Summary:<ul> <li>Applies engineering principles to design, modify, or develop facilities, testing, machines, equipment, or processes used in manufacturing and facility maintenance in order to advance technology or productivity of operations.&nbsp;&nbsp;</li> <li>Manage Capital and expense projects to develop scopes and budgets, maintain quality communications, completion schedules and regulatory requirements.</li></ul>Key Responsibilities:&nbsp;<ul> <li>Specify new production equipment or modifications to existing equipment.&nbsp;</li> <li>Develop functional specifications.&nbsp;</li> <li>Work with suppliers and contractors on procurement and implementation of production equipment and infrastructure support.&nbsp;&nbsp;</li> <li>Test newly installed machines and equipment to ensure fulfillment of contract specifications.&nbsp;&nbsp;</li> <li>Provide maintenance engineering and troubleshooting assistance.</li> <li>Generate contract scope of work documents and cost estimates.&nbsp;&nbsp;</li> <li>Oversee contractor work and monitor safe work practices.&nbsp;</li> <li>Act as single point accountable person for EHS policies.</li> <li>Comply with Company, Federal, and State EHS policies.</li> <li>Occasional travel required&nbsp;</li></ul>QualificationsBasic Qualifications:<ul> <li>Bachelor's degree in engineering from an accredited institution.&nbsp;</li> <li>Minimum 3 years' experience in mechanical project engineering and plant maintenance within manufacturing environment.</li> <li>Must be able to provide documentation in the original form establishing both your identity and your employment eligibility in the U.S.</li> <li>This position entails access to export-controlled items you must be able to lawfully obtain access to such items.</li></ul>&nbsp;Preferred Qualifications:<ul> <li>Experience with ACAD and Inventor design software</li> <li>Proficient with Microsoft Office to include Word, Excel, Powerpoint, and Project software</li> <li>Understanding of hydraulic, pneumatic, and electrical control systems in a diverse industrial environment</li> <li>Ability to rapidly grasp concepts and understand processes</li> <li>Ability to multitask</li> <li>Familiarity with a wide variety of facility infrastructure systems</li> <li>Experience with Investment Casting&nbsp;</li></ul>About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Facilities Mechanical Engineer

Automotive Mechanic&nbsp;Interested candidates must apply to the Automotive Mechanic posting by visiting careers.paturnpike.com by July 31, 2025.&nbsp;Posting Start Date:&nbsp;June 30, 2025&nbsp;Posting End Date:&nbsp;July 31, 2025&nbsp;Position Number:&nbsp;80005673&nbsp;Union:&nbsp;Local 250&nbsp;FLSA Status:&nbsp;Hourly&nbsp;Department:&nbsp;Maintenance&nbsp;Pay Grade:&nbsp;PR65A&nbsp;Hourly Rate:&nbsp;$27.16 &nbsp;Employment Type:&nbsp;Full Time&nbsp;Building Location:&nbsp;Southern Beltway Maintenance&nbsp;Building Street:&nbsp;2000 South Fayette Way&nbsp;Building City:&nbsp;McDonald&nbsp;Building State:&nbsp;Pennsylvania (US-PA)&nbsp;Building Zip Code:&nbsp;15057&nbsp; &nbsp;The Pennsylvania Turnpike Commission, opened on October 1, 1940, is known as “America’s First Superhighway”!  Our mission is to operate a safe, reliable, customer-valued toll road system that supports national mobility and commerce.  The PTC operates a 552-mile system used by 192 million vehicles a year.  Together, we are building the highway of the future.&nbsp;Job Purpose and Summary&nbsp;This is skilled mechanical work in the maintenance and repair of automotive and related equipment. An employee in this classification has responsibility for the performance of skilled tasks in servicing and repairing automobiles, trucks, rollers, sweepers and other construction and maintenance equipment. Employees work under general supervision, using judgement concerning the method of repair after receiving oral or written orders identifying a problem or need to repair a piece of equipment. A supervisor may test results during the work and/or after work has been completed.&nbsp;Essential Functions &amp; Responsibilities&nbsp;Repairs and overhauls automobiles, trucks, tractors, air compressors, cement mixers and other equipment.&nbsp;Operates various types of motor vehicles. Applies a working knowledge of equipment systems, functions and components.&nbsp;Repairs engines, transmissions, clutches, brakes and all parts of automotive equipment.&nbsp;Checks and balances wheels for proper alignment.&nbsp;Analyzes, troubleshoots and tests alternators, generators and electrical system components on equipment. Performs repairs as required.&nbsp;Troubleshoots, repairs or rebuilds hydraulic systems.&nbsp;Keeps and reports on service and repair records.&nbsp;Inspects all PTC vehicles for compliance with state regulations.&nbsp;Completes diagnostic work on gasoline, diesel and alternative fuel engine systems.&nbsp;Performs emergency road-side service.&nbsp;Performs minor welding as required.&nbsp;Performs related duties as assigned.&nbsp;  &nbsp;Qualifications&nbsp;Completion of high school or equivalent certification.&nbsp;Must possess a valid Class B commercial driver’s license (CDL) and must pass the Class A CDL road test by the end of their trial period (current employees) or probationary period (new hires);&nbsp; OR &nbsp; Must possess a valid Class A learner’s permit and must pass the Class A CDL road test by the end of the trial period (current employees) or probationary period (new hires).&nbsp;The incumbent must possess (or obtain) an N or X endorsement on their CDL or permit to authorize them to operate tank vehicles by the end of their trial period (current employees) or probationary period (new hires).&nbsp;The incumbent may not have any of the following restrictions on their CDL or permit:&nbsp; E – Prohibits the operation of manual transmission commercial vehicles&nbsp; L or Z – Prohibits driving a commercial vehicle equipped with airbrakes&nbsp; O – Prohibits the driver from driving a truck tractor/semi-trailer combination&nbsp;Must possess a valid Medical Examiner’s Certificate (DOT Physical Card).&nbsp;Must possess a valid Class 4 or Class 7 Pennsylvania state inspection license;&nbsp; OR&nbsp; Must possess a Class 1 Pennsylvania state inspection license AND must obtain a valid Class 4 or Class 7 Pennsylvania state inspection license within 90 days of starting the position.&nbsp;A degree or certification in automotive technology from an accredited technical school;&nbsp; OR &nbsp; Three (3) years of experience as an automotive mechanic with experience in gasoline, diesel or alternative fuel engine diagnostics, electronics and hydraulic troubleshooting.&nbsp;Competencies&nbsp;Attention to Detail&nbsp;Customer/Client Focused&nbsp;Flexibility&nbsp;Motivated&nbsp;Problem Solving/Analysis&nbsp;Quality Control&nbsp;Regular and Predictable Attendance&nbsp;Reliability&nbsp;Safety&nbsp;Teamwork Orientation&nbsp;Technical Capacity&nbsp;Physical Demands and Work Environment&nbsp;Position requires frequent speaking. Position requires occasional work at a computer utilizing business programs and PTC specific operating systems, including writing and/or reading reports. Occasionally works long hours in emergency situations, adverse weather conditions or for extended work assignments. Lifts, carries or exerts force equivalent to lifting up to 75 pounds. Position requires frequent travel and/or fieldwork with exposure to roadway traffic. Position requires the ability to work on equipment above the head, bending, crouching, lying and frequently several feet above the ground. Exposure to adverse and undesirable conditions. Physical environment is generally safe, but safety equipment or precautions must be followed in field conditions.  &nbsp;Benefits&nbsp;Employees will be offered an exceptional benefits package which includes comprehensive medical and prescription coverage, with minimal employee contribution, for employee, spouse and/or eligible dependents. A range of retirement plan options are offered through the Pennsylvania State Retirement System (SERS). Dental and vision coverage are also offered through the Local Teamsters Union. In addition, leave programs, tuition reimbursement and employee assistance program are available to employees.&nbsp;The Pennsylvania Turnpike Commission is an equal opportunity employer. We value diversity and are committed to creating an inclusive environment for all employees. If you need assistance or an accommodation due to a disability, you may contact the Human Resources Department by calling 717-831-7378.&nbsp;

Pennsylvania Turnpike Commission

Automotive Mechanic

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!ABOUT THE TEAM:&nbsp;Are you ready to dive into the world of cutting-edge aerospace technology? Our Manufacturing Engineering team is at the heart of turning innovative designs into tangible, high-performance hardware. This is your chance to be part of the critical process that brings real hardware to life and adds immense value to our business. We are the primary frontline engineering support for the Electron Launch vehicle – the most launched light lift rocket in the world. As an intern, you'll have the unique opportunity to witness numerous launches, some of which you will have directly contributed to during your time with us. Our team is also pioneering the development of Neutron, transforming R&amp;D designs into manufacturable products ready for launch. We design and build the machines and processes that construct these incredible rockets.&nbsp;YOUR MISSION:&nbsp;Support the Neutron F2 Manufacture by productionising prototype designs from F1 and developing tooling and automation to enable high-rate manufacture for Neutron. Your key responsibilities will include:&nbsp;<ul><li>Productionise at least one avionics product: Take innovative designs and make them ready for mass production.&nbsp;</li><li>Design and deliver tooling and jigging: Create tools and jigs to enhance manufacturing rates.&nbsp;</li><li>Release production quality work instructions: Develop and document detailed instructions for at least one product.&nbsp;</li><li>Develop material sourcing plan: Complete process qualification for at least one Neutron Avionics part.&nbsp;</li></ul>PREFERRED QUALIFICATIONS &amp; EXPERIENCE:&nbsp;<ul><li>Current student in good academic standing in one of the following fields: Aerospace / Aeronautical / Astronautical Engineering, Electrical Engineering, Manufacturing Engineering, Mechatronics Engineering, Physics&nbsp;</li><li>Software scripting experience in Python for data processing and other applications.&nbsp;</li><li>Experience with electronic systems such as Arduino, Atmel, and embedded systems.&nbsp;</li><li>CAD experience for electro-mechanical design.&nbsp;</li></ul>REQUIREMENT:&nbsp;Available to work full-time, on-site for a minimum of 12 consecutive weeks beginning November 2025.WHY JOIN US?&nbsp;<ul><li>Hands-on Experience: Work on real projects that will be launched into space.&nbsp;</li><li>Innovative Environment: Be part of a team that is at the forefront of aerospace technology.&nbsp;</li><li>Professional Growth: Gain invaluable experience and skills that will propel your career forward.&nbsp;</li><li>Exciting Work Culture: Witness rocket launches and contribute to groundbreaking projects.&nbsp;</li></ul>Ready to launch your career in aerospace manufacturing? Apply now and become a vital part of our mission to make Neutron a reality!&nbsp;When applying, include a detailed cover letter stating what interests you about Rocket Lab and this role in particular. Feel free to be creative and stand out in your application and introduction to the team at Rocket Lab. Be sure to include relevant experience/personal or school projects you have completed that align with this role and why you believe you would be the best candidate for this role.&nbsp;WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

637 Engineering Jobs