field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

Join the Clean Energy RevolutionBecome Power System SCADA Engineer at Southern California Edison (SCE) and build a better tomorrow. In this job, you’ll design, implement, and support the operation of SCADA systems which remotely monitor, control, and automate SCE’s vast network of electrical substations and interconnected 3rd party energy resources. As a Power System SCADA Engineer, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?<h4>Responsibilities</h4><ul><li>Performs inspections and evaluations of existing conditions for various electrical equipment and systems for proper installation, problem identification/ trouble shooting, and overall improvements</li><li>Ensures system event assessments and RCA are performed for equipment failures and implements corrective actions, confirming proper mitigation plans are in place</li><li>Prepares thorough and accurate technical reports, correspondence, documentation, calculations, and design plans related to projects and analysis of increasing scope and complexity</li><li>Conducts independent engineering work, receiving guidance on the evaluation, selection, application and adaptation of engineering techniques, procedures, and criteria</li><li>Performs power system modeling and analyses utilizing software tools and applications; stays informed of technology advancements, market trends, and relevant guidelines and standards related to energy technology</li><li>Ensures the performance of day to day preventive maintenance activities to maintain equipment and ensure continued operation according to required standards including</li><li>Health, Safety, and Environment (HSE) and Good Manufacturing Practice (GMP) quality and environmental and reliability standards</li><li>Helps ensure infrastructures supporting processes are validated/qualified throughout their life cycle</li><li>Develops the engineering facility design, including but not limited to electrical system design, such as sizing, creating one-line diagrams, and selecting equipment</li><li>Assists in the development of new technology and standards strategy and the implementation of strategies into business operations to improve power system funcionality and quality of service to customers</li><li>Act as project sponsors with some technical assistance when responding to technical questions requiring project modification to move projects through their lifecycle.</li><li>A material job duty of all positions within the Company is ensuring the protection of all its physical, financial and cybersecurity assets, and properly accessing and managing private customer data, proprietary information, confidential medical records, and other types of highly sensitive information and data with the highest standards of conduct and integrity.</li></ul><h4>Minimum Qualifications</h4><ul><li>Bachelor's Degree in Engineering or Bachelor's Degree in a scientific/technical/math field.</li><li>Two or more years of experience performing engineering work in operations, production, construction or maintenance environments.</li><li>Possess a valid Class C Driver's License.</li></ul>Preferred Qualifications<ul><li>Four or more years of experience or more in EMS/SCADA/Process Control Systems, which includes knowledge and extensive skills in Instrumentation and Control technologies. </li><li>Experience with DNP 3.0, Modbus and Inter Control Center Protocol (TASE2/ICCP). Ability to demonstrate experience working with automation devices/equipment.</li><li>Knowledge of the SCE Electric System, and the role that SCADA / Remote Telemetry plays in the operation SCE Transmission, Sub Transmission, and Distribution systems.</li><li>Very analytical with experience troubleshooting complex problems related to real-time systems. This would include: understanding architecture for systems that have high availability and resiliency, knowledge of IT network communication protocols and equipment.</li><li>Professional oral and written communication skills, and be customer focused to understand and appropriately respond to clients’ business needs. Ability to work effectively and collaborate with end-users, vendors, project teams, management and external working groups.</li><li>Experience effectively analyzing, preparing and presenting project information, and making sound decisions that have moderate to significant business impact.</li><li>Experience leading and coordinating projects, with the ability to manage high volumes of work and meet multiple critical milestones.</li></ul>Additional Information<ul><li>This position’s work mode is&nbsp;hybrid.&nbsp;The employee will report to an SCE facility for a set number of days with the option to work remotely on the remaining days.  Unless otherwise noted, employees are required to work and&nbsp;reside in the state of California.  Further details of this work mode will be discussed at the interview stage.&nbsp;The work mode can be changed based on business needs.</li><li>Visit our&nbsp;Candidate Resource&nbsp;page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!</li><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.&nbsp;</li></ul><ul><li>The primary work location for this position isAlhambra, CA.&nbsp; However, the successful candidate may also be asked to work for an extended amount of time atlocations within SCE territory.</li></ul><ul><li>Position will require up to&nbsp;25%&nbsp;traveling and being out in the field throughout the&nbsp;SCE service territory&nbsp;including SCE electrical substations and 3rd Party electrical facilities. &nbsp;</li></ul><ul><li>This position has been identified as a NERC/CIP impacted position - Prior to being hired, the successful candidate must pass a Personnel Risk Assessment (PRA) or Background Investigation.&nbsp; Once hired, the candidate must complete specified training prior to gaining un-escorted access to assigned work location and performing necessary job duties.</li></ul><ul><li>Relocation does not apply to this position.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.At SCE, we celebrate our differences. We are a proud Equal Opportunity Employer and will not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other protected status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

Southern California Edison

Power System SCADA Engineer

Join the Clean Energy RevolutionBecome a Power System Application Engineer 3 at Southern California Edison (SCE) and build a better tomorrow. In this job, you will work with a team&nbsp;to develop and implement critical Real-Time Power System Applications, and work with vendors to resolve application issues. You will maintain existing Remedial Action Schemes (RAS) and develop new expansion projects using C, C++, and&nbsp;C#.&nbsp; &nbsp;Additionally, you’ll:<ul><li>Assist in developing, testing, deploying, and maintaining Real-Time Remedial Action Scheme (RAS) applications on Energy Management System (EMS) and Unified Analytic Platform (UAP) on Centralize Remedial Action Scheme (CRAS). &nbsp;</li></ul><ul><li>Perform tier 3 support on sophisticated technical issues associated with Real-Time RAS applications.&nbsp;</li></ul>As a Power System Application Engineer 3, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?&nbsp; <h4>Responsibilities</h4><ul><li>Ensures technical issues and problems are resolved in a timely, efficient and cost-effective manner utilizing available resources</li><li>Supervises, leads, and coordinates work with full time and contract employees in the execution of new technical strategies, equipment or standards.</li><li>Conducts life cycle assessments for utility infrastructure materials and processes; improves preventive maintenance procedures to decrease overall downtime</li><li>Conducts risk assessments and implements risk mitigation strategies to ensure the safety and reliability of engineering projects</li><li>Supports audits and inspections; ensures compliance with relevant environmental, health, and safety regulations</li><li>Provides engineering and technical expertise and guidance for the identification, analysis and resolution of high impact, complex and/or cross-functional problems in engineering</li><li>Ensures the engineering facility design basis is controlled and design basis documentation is maintained</li><li>Conducts engineering and related studies with full technical responsibility for planning and coordinating high-impact complex projects</li><li>Provides support and technical training to junior engineering levels</li><li>A material job duty of all positions within the Company is ensuring the protection of all its physical, financial and cybersecurity assets, and properly accessing and managing private customer data, proprietary information, confidential medical records, and other types of highly sensitive information and data with the highest standards of conduct and integrity.</li></ul><h4>Minimum Qualifications</h4><ul><li>Bachelor's Degree in Engineering or Bachelor's Degree in a scientific/technical/math field.</li><li>Five or more years of experience performing engineering work in operations, production, construction or maintenance environments.</li><li>Possess a valid Class C Driver's License.</li></ul>Preferred Qualifications<ul><li>Three or more years of experience in developing and maintaining complex programs using&nbsp;C, C++, or C#.&nbsp;</li><li>Experience troubleshooting and resolving system technical issues.&nbsp;</li><li>Experience and technical knowledge of SCADA and control systems.&nbsp;</li><li>Solid understanding of infrastructure and networking capabilities to design highly resilient systems.&nbsp;</li><li>Experience with Linux shell scripting.&nbsp;</li><li>Experience with network traffic analysis.&nbsp;</li><li>Experience with GOOSE (Generic Object Oriented Substation Event) protocol&nbsp;</li></ul>Additional Information<ul><li>This position’s work mode is&nbsp;hybrid.&nbsp;The employee will report to an SCE facility for a set number of days with the option to work remotely on the remaining days.  Unless otherwise noted, employees are required to work and&nbsp;reside in the state of California.  Further details of this work mode will be discussed at the interview stage.&nbsp;The work mode can be changed based on business needs.</li></ul><ul><li>Visit our&nbsp;Candidate Resource&nbsp;page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!</li><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.&nbsp;</li><li>This position has been identified as a NERC/CIP impacted position - Prior to being hired, the successful candidate must pass a Personnel Risk Assessment (PRA) or Background Investigation.&nbsp; Once hired, the candidate must complete specified training prior to gaining un-escorted access to assigned work location and performing necessary job duties.</li><li>Relocation does not apply to this position.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.At SCE, we celebrate our differences. We are a proud Equal Opportunity Employer and will not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other protected status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

Power System Application Engineer 3

Howmet Engines is looking for a Continuous Improvement (HBS)/IT Engineer to plan, implement and follow-through on automation initiatives within our current systems.&nbsp; The HBS/IT Engineer will coordinate and lead a wide range of activities that are designed to improve on-time delivery, productivity, quality, cost, safety and environmental performance.&nbsp; This position is located at our aerospace forging plant in Fontana, CA. Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next-generation of quieter, more fuel-efficient aero engines and cleaner power generation.&nbsp; Howmet Engines is a business unit of Howmet Aerospace&nbsp;(NYSE:HWM). Join Howmet and join a network of people who are passionate about industry-changing technology that advances the world. You’ll have the opportunity to work with leading global companies that operate in world-changing industries—such as aerospace, automotive, building and construction, defense and commercial transportation. It’s not just a job. It’s a career and a path to the future. You’ll be part of a diverse culture of learning, teaching and mentorship. Howmet is fully committed to developing people: providing employees with the resources and learning and development opportunities they need to excel and build a career. Key Responsibilities: <ul><li>Expand local reporting automation opportunities from Visual</li><li>Implement a financial /KPI/planning dashboard</li><li>Roll out usage of Power BI or other localized dashboard reporting platform for production metrics</li><li>Interact with necessary business processes and system owners to effectively understand requirements and implement the appropriate systems solutions</li><li>Effectively utilize a standardized project lifecycle and management methodology to manage projects, communicate status, and deliver work to schedule and budget</li><li>Execute work in compliance with all appropriate audit and regulatory requirements</li><li>Performs other tasks of equal or lesser skill as required</li></ul> Pay rate: $85k - $95k depending on experience Qualifications <ul><li>SQL server management studio</li><li>SQL Programming Language</li><li>Microsoft Power Apps</li><li>Microsoft Power Automate</li><li>SharePoint</li><li>Microsoft Excel</li><li>Visual Basic Programming within Microsoft Excel</li><li>SAP Crystal Reports</li><li>C Sharp – Programming Language</li><li>ASP.net webpages&nbsp;</li></ul> Basic Qualifications: <ul><li>Bachelor’s degree from an accredited university</li><li>1 year experience in IT and/or automation engineering</li><li>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as U.S. citizen, U.S. Permanent Resident (i.e. ‘Green Card Holder’), Political Asylee, or Refugee.</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.&nbsp;</li><li>To ensure the health and safety of our employees, Howmet requires newly hired employees to be fully vaccinated for COVID-19 to the extent permitted under federal, state, and local law. Requests for reasonable accommodations on the basis of a disability, medical condition, or sincerely held religious beliefs or legally recognized exemptions will be considered.</li></ul> Preferred Qualifications: <ul><li>Bachelor’s degree in computer science, computer information systems, or computer engineering from an accredited university</li><li>Strong interpersonal skills</li><li>Solid understanding and practical application of systems analysis and technical skill in applicable area of focus</li><li>Effective verbal and written communication skills</li><li>Ability to effectively present material to a wide range of audiences</li></ul> Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

Engineer, Continuous Improvement/IT

SUMMARY We are seeking a highly motivated Entry-Level Controls Engineer to join our team and contribute to the optimization of manufacturing processes. In this role, you will work alongside experienced engineers to support planned and unplanned jobs, equipment reliability initiatives, and continuous improvement projects. This position provides a unique opportunity for a recent graduate looking to build a solid foundation in automation, robotics, and process optimization while also getting hands-on with mechanical and electrical installations on the shop floor. ESSENTIAL DUTIES AND RESPONSIBILITIES: This is not intended as a comprehensive list; it is intended to provide a representative summary of the major duties and responsibilities. Incumbent(s) may not be required to perform all duties listed, and may be required to perform additional, position-specific tasks. <ul><li>Assist with defining the scope, schedule, and execution of various projects (capital, process, efficiency) under the guidance of senior engineers.</li><li>Participate in identifying opportunities for automation and process innovation to enhance efficiency and reduce costs.</li><li>Partner with plant personnel to identify and troubleshoot production bottlenecks.</li><li>Help document and track problem-solving activities, cost-reduction initiatives, and performance improvement measures.</li><li>Contribute to the design, development, and maintenance of robotic control systems, particularly for material removal and similar automated processes.</li><li>Gain exposure to troubleshooting and modifying existing programs (ladder logic/structured text) to address real-time production issues.</li><li>Work with a cross-functional team to uncover root causes of deficiencies and propose viable solutions to improve Overall Equipment Effectiveness (OEE).</li><li>Participate in brainstorming sessions to generate and implement ideas for safety improvements, waste reduction, and process optimization.</li><li>Continuously learn and stay current on electrical, controls, and automation engineering best practices.</li><li>Engage in research to explore new “state-of-the-art” technologies that could be introduced to the manufacturing floor.</li><li>Assist in gathering data, writing reports, and preparing project-related documentation (engineering specifications, work orders, cost estimates, etc.).</li><li>Support project planning activities, including scheduling, coordinating equipment installations, and working with contractors or internal resources.</li></ul> SUPERVISORY RESPONSIBILITIES&nbsp; This job has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. <ul><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. Green Card Holder), Political Asylee, or Refugee.</li></ul> PREFERRED QUALIFICATIONS <ul><li>Exposure to Lean Manufacturing principles through coursework, internships, or co-ops.</li><li>Basic understanding of electrical and mechanical systems, including hydraulic, pneumatic, and control systems.</li><li>Familiarity with Rockwell Automation control systems is a plus.</li><li>Experience with industrial robots (e.g., Fanuc) and SCADA platforms (e.g., Ignition) is beneficial but not required.</li><li>Basic programming skills in VB.Net, Python, or SQL are a bonus.</li></ul> EDUCATION and/or EXPERIENCE&nbsp; <ul><li>Bachelor’s degree in Electrical, Mechanical, Industrial, or a related Engineering discipline from an accredited institution.</li><li>Academic or project experience in controls engineering, automation, or robotics (e.g., senior design project) is strongly preferred.</li><li>Familiarity with PLC programming, robotics, or automation software is a plus.</li><li>Working knowledge of AutoCAD or other design software is preferred.</li></ul> LANGUAGE SKILLS <ul><li>Ability to read and interpret basic operating instructions and procedure manuals.</li><li>Capable of writing clear, concise reports and basic correspondence.</li><li>Strong verbal communication skills, with the ability to collaborate effectively in a team environment.</li></ul> MATHEMATICAL SKILLS&nbsp; <ul><li>Fundamental proficiency in algebra, statistics, geometry, and basic arithmetic.</li><li>Willingness to apply these skills in practical engineering and troubleshooting scenarios.</li></ul> REASONING ABILITY&nbsp; <ul><li>Capable of analyzing technical problems in a structured environment.</li><li>Demonstrates flexibility and adaptability when encountering non-standard or unfamiliar situations.</li></ul> COMPUTER SKILLS Advanced proficiency in Microsoft Office Suite General knowledge of scanning documents. SUPERVISION REQUIRED <ul><li>Works under close supervision for new or more complex tasks, with guidance and mentorship provided by senior engineering staff.</li><li>Demonstrates initiative in routine tasks and seeks input when facing unfamiliar challenges.</li></ul> PHYSICAL DEMANDS&nbsp; The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and taste or smell.&nbsp; The employee is occasionally required to sit.&nbsp; The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds.&nbsp; Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts.&nbsp; The employee is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme cold; and extreme heat.&nbsp;The employee is occasionally exposed to risk of electrical shock and vibration.&nbsp; The noise level in the work environment is usually loud. Pay $80,000 - $95,000/ year. Exact compensation may vary based on skills, experience, and location. Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Controls Automation Improvement Engineer

Company Description Veolia Group is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world's most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description Are you looking for an exciting opportunity to showcase your expertise in instrumentation and controls? Look no further! Veolia Water Technologies and Solutions is seeking a highly skilled and detail-oriented Instrumentation and Controls Technician to join our team. We are only interested in candidates from the following areas at this time: LAX or Northern, California or Phoenix, Arizona. As an Instrumentation and Controls Technician, you will play a crucial role in the development, implementation, and troubleshooting of control systems for water treatment equipment. Your responsibilities will include selecting the appropriate instrumentation, programming Programmable Logic Controllers (PLCs), Human-Machine-Interface stations, SCADA, or other control systems, and ensuring their seamless integration into our water treatment processes. In addition to your technical expertise, you will also be responsible for documenting your work, performing routine maintenance, and troubleshooting any issues that may arise. Your ability to think critically and problem-solve in a fast-paced environment will be crucial to your success in this role. To excel in this position, you should possess a strong attention to detail and have a genuine passion for ensuring the highest level of quality and efficiency in our operations. You should have a solid understanding of instrumentation and controls, and be comfortable working with various tools and software programs. Key Responsibilities: -Utilize design documents including Control Logic Diagrams, Shutdown Keys, Loop Diagrams, Instrument Indices, Setpoint Lists, DCS and PLC Design documents to commission and troubleshoot control systems -Develop and/or redline P&amp;IDs, electrical drawings/schematics, control documents, and transfer lists -Interface with customers regarding I&amp;C designs and submitted design documents. -Understand and assess client problems and determine appropriate means of solution -Perform control system factory acceptance tests with Clients and client-designated representatives. -Work cross-functionally between engineering and service teams -Setup and troubleshoot Ethernet based networks to allow connectivity for remote monitoring and/or remote support. -Other duties as assigned What will you enjoy from working with us? -Recognition for your hard work and achievements! -Opportunity for new challenges! We are growing! -Competitive pay and benefits including 401k! -Paid training! -Strong leadership team! -An award-winning organization that you will be proud to work for! At Veolia Water Technologies and Solutions, we pride ourselves on being at the forefront of cutting-edge technology in the water treatment industry. By joining our team as an Instrumentation and Controls Technician, you will have the opportunity to contribute to innovative projects that have a positive impact on our environment and communities. If you are a self-motivated individual who is eager to take on new challenges and make a difference in the world, then we invite you to apply for the position of Instrumentation and Controls Technician with Veolia Water Technologies and Solutions. Join our team and become part of a company that values your expertise and offers ample opportunities for growth and advancement. At Veolia, we realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We're an organization that champions diversity and inclusion at every rung of the ladder and are proud to be an equal opportunity workplace. Because our people are our greatest assets, we also offer competitive compensation and benefits that include: <ul><li>Compensation: The salary range is tied to the market for similarly benchmarked roles. The range is not an absolute, but a guide, and offers will be based on the individual candidate's knowledge, skills, experience and market conditions, as well as internal peer equity. Depending upon all of the preceding considerations for the final selected individual candidate, the offer may be lower or higher than the stated range of $65,000 to $80,000 annually</li><li>Annual Incentive Plan Bonus</li><li>Health &amp; Life Insurance</li><li>Paid Vacation &amp; Sick Time</li><li>Paid Holidays</li><li>Parental Leave</li><li>401(k) Plan</li><li>Flexible Spending and Health Savings Accounts</li></ul> Qualifications About You (Skills/Experience Required): -Degree in Engineering or Engineering Technology or 5 years' experience designing and commissioning instrumentation and control equipment in power plants, chemical process facilities, petroleum refineries or wastewater treatment plants -Or associates degree in Electronics or Controls with 3 years' field experience in troubleshooting, commissioning DCS, PLC or SCADA Control Systems. -Ability to travel in support of domestic; anticipated travel up to 75% and Field emergency calls during off-hours and on weekends -Ability to support work at remote construction sites: ability to access equipment via ladders &amp; stairs, lift 30 lbs. wear and use Personal Protective Equipment -Working experience and understanding of fieldbus networks (Controlnet, Devicenet, Foundation Fieldbus) -2 yrs of water treatment systems and equipment. UF, RO, EDR, EDI, Ion Exchange, pumps, motors, FDA, filtration, and chemical feed systems experience -Ability to gain and maintain access to sites assigned. Desired: -Self-motivated, quick to deliver and a team player -Effective problem solving skills -Demonstrated dedication to safety -An accomplished communicator, able to produce expert technical papers, publications, and design reports -Demonstrated ability to work independently and remotely with project teams -Strong oral and written communication skills -Ability to meet all customer site requirements Additional Information We offer competitive compensation and benefits working in a dynamic environment with challenging projects and training provided to ensure your success. We realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We're an organization that champions diversity and inclusion at every level and are proud to be an equal opportunity workplace! As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

Instrumentation and Controls Technician

SUMMARY Responsible for managing Howmet’s quality interactions and all quality related functions for designated Customers.&nbsp; Familiarity with customer quality systems, portals, document requirements, quality objectives, and customer quality initiatives.&nbsp;Develops management tools and strategies to ensure that Howmet’s meets customer expectations for quality compliance, certifications, and inter-company communication.&nbsp; Interfaces with the designated customers as Howmet quality representative. Communicates Howmet business objective and cooperative limits to customers within the confines of industry compliance.&nbsp; Works directly with customers to define requirements and solve quality issues while maintaining excellent relationships.&nbsp; Initiative and communication skills are paramount for success.&nbsp;Role requires a blend of both strategic and tactical approaches to managing the customer and their expectations. ESSENTIAL FUNCTIONS:This is not intended as a comprehensive list; it is intended to provide a representative summary of the major duties and responsibilities. Incumbent(s) may not be required to perform all duties listed, and may be required to perform additional, position-specific tasks. <ul><li>Perform quality review of orders during contract review including purchase orders, specifications, blueprints, and other related documents</li><li>Perform quality review of quality records (i.e. certification, packing slips, etc.) prior to shipment</li><li>Complete and submit first article packages</li><li>Perform quality assurance verification for raw material</li><li>Perform reviews of new or revised specifications</li><li>Ensure compliance to FMI and customer quality system requirements</li><li>When customer certified as such, act as customer’s agent on all product quality and quality systems issues</li><li>Complete all audits, forms, and reports as required by the customer</li><li>Ensure proper identification and packaging as required</li><li>Ability to use quality tools to respond and resolve customer concerns</li><li>Perform other duties as assigned</li></ul> SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.&nbsp; The requirements listed below are representative of the knowledge, skill, and/or ability required.&nbsp; Reasonable accommodations may be made to enable individuals with disabilities to perform the essential function. EDUCATION AND/OR EXPERIENCE Bachelor’s degree or higher in the Engineering field. A minimum of five years of direct related experience in the aerospace manufacturing and /or forging industry is required. Strong working knowledge of Quality Systems, Quality Standards and material specifications is preferred. TECHNICAL SKILLS Must be able to read engineering drawings and specifications, have knowledge of geometric dimension and tolerancing principles and have the ability to use measuring devices common to the manufacturing industry. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, drawings, standards, specifications and operating instructions and procedures.&nbsp;Ability to compose routine reports and correspondence for internal/external customers.&nbsp; Ability to communicate effectively before groups of employees of organization, customers, and outside regulatory agencies. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, proportions and percentages.&nbsp; Ability to perform conversion calculations (e.g. metric to inches, Celsius to Fahrenheit).&nbsp; Ability to apply concepts of basic mathematics. REASONING ABILITY Ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems.&nbsp;Ability to decipher nonverbal symbolism (formulas, scientific equations, graphs, etc.,) in its most difficult phases.&nbsp;Ability to decipher a variety of abstract and concrete variables. INTERPERSONAL SKILLS – CUSTOMER RELATIONS Demonstrated ability to effectively develop long-standing business relationships while managing through difficult issues.&nbsp; Must be highly intuitive when dealing with customer’s expectations and must be alert to the impact that cultural differences have on the business relationship. COMPUTER SKILLS Proficient in Microsoft Office Suite &amp; MRP Systems. CERTIFICATES, LICENSES, REGISTRATIONS Certified Auditor by American Society for Quality (ASQ) preferred, but not required. Six Sigma, Greenbelt certification preferred but not required. Must meet the requirements pertaining to Vision Acuity Testing under the Quality Assurance Manual. GE DSQR Certificate, PWA DSQR Certificate are required. Rolls Royce DSQR, MTU DSQR Certificate and Snecma SARA certificate are preferred but not required. ASQ Certified Internal Auditor preferred but not required. PHYSCAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.&nbsp;Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear.&nbsp; The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl.&nbsp;The employee is required to sit frequently.&nbsp; The employee must regularly lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds; Specific vision abilities required by this job include close vision. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently exposed to moving mechanical parts and vibration.&nbsp; The employee is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals and outside weather conditions; wet and/or humid conditions, extreme cold, and extreme heat.&nbsp; The noise level in the work environment is usually loud. Pay rate: up to $100,000, DOE Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Engineer, Quality

Join the Clean Energy RevolutionBecome a Power System Application Engineer 2 at Southern California Edison (SCE) and build a better tomorrow. In this job, you will work with a team to develop &amp; implement critical Real-Time Power System Applications, work with vendor to resolve application issues. You will maintain existing Remedial Action Schemes (RAS) and develop new expansion projects using C, C++, and C#. &nbsp;&nbsp;As a Power System Application Automation Engineer your work will help power our planet, reduce carbon emissions, and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?&nbsp;Responsibilities<ul><li>Assist in developing, testing, deploying, and maintaining Real-Time Remedial Action Scheme (RAS) applications on Energy Management System (EMS) and Unified Analytic Platform (UAP) on Centralize Remedial Action Scheme (CRAS). &nbsp;</li><li>Perform tier 3 support on sophisticated technical issues associated with Real-Time RAS applications.</li><li>A material job duty of all positions within the Company is ensuring the protection of all its physical, financial and cybersecurity assets, and properly accessing and managing private customer data, proprietary information, confidential medical records, and other types of highly sensitive information and data with the highest standards of conduct and integrity.</li></ul>Minimum Qualifications<ul><li>Bachelor’s Degree in Computer Science, Engineering, Information Systems, or related technical field.</li><li>Two or more years of engineering experience.</li><li>Three&nbsp;or more years of experience in developing and maintaining complex programs using C, C++, or C#.</li><li>Experience troubleshooting and resolving system technical issues.&nbsp;</li></ul>Preferred Qualifications<ul><li>Experience and technical knowledge of SCADA and control systems.</li><li>Good understanding of infrastructure and networking capabilities to design highly resilient systems.</li><li>Experience with Linux shell scripting.</li><li>Experience with network traffic analysis.</li><li>Experience with GOOSE (Generic Object Oriented Substation Event) protocol.</li></ul>Additional Information<ul><li>This position’s work mode is hybrid. The employee will report to an SCE facility for a set number of days with the option to work remotely on the remaining days.  Unless otherwise noted, employees are required to reside in the state of California.  Further details of this work mode will be discussed at the interview stage. The work mode can be changed based on business needs.</li><li>Visit our Candidate Resources page to get meaningful information related to benefits, perks, resources, testing information, and hiring process, and more! </li><li>This position has been identified as a NERC/CIP impacted position - Prior to being hired, the successful candidate must pass a Personnel Risk Assessment (PRA) or Background Investigation. Once hired, the candidate must complete specified training prior to gaining un-escorted access to assigned work location and performing necessary job duties.</li><li>Relocation does not apply to this position.&nbsp;</li><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.</li></ul>About Southern California Edison The people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.&nbsp;At SCE, we celebrate our differences. We are a proud Equal Opportunity Employer and will not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other protected status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.&nbsp; .

17 Engineering Jobs in Pomona, CA, USA