field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

ResponsibilitiesUnder the direction of the Lead Continuous Improvement Engineer , this position is responsible for supporting and assisting the Continuous Improvement Organization (Business Unit and Manufacturing Plants) as “boots on the ground” in the organization, planning, implementation, and follow-through of manufacturing improvement initiatives.&nbsp; Correspondingly, the incumbent coordinates and leads a wide range of activities that are designed to improve on-time delivery, productivity, quality, cost, safety, and environmental performance. This position does not directly supervise other personnel. Additionally, this position supports Operations Supervisors, Area Leads, and Plant Managers.This position is located in Wichita Falls, TX.Key Objectives<ul> <li>Work out of the Wichita Falls, TX site as part of a team to reduce executional scrap.</li> <li>Create a system following ‘step by step’ procedures for the loading and unloading of large volume processing equipment.</li> <li>Complete time studies in various processes and identify opportunities for improvement.</li> <li>Perform shopfloor observations, working with Manufacturing employees to document current and target conditions.&nbsp; Eliminate non-value added activities while working on scrap reduction activities.</li> <li>Participate in the Howmet Business System implementation of continuous improvement initiatives and drive waste reductions utilizing Lean principles (JIT, Autonomation, Value Stream Mapping, Kaizen, 5S, Standard Work, Line/Cell Design, Single Piece Flow, Material Flow, Visual Management, SMED, TPM, Root Cause Problem Solving, etc.)</li> <li>Coordinate with resource departments within the assigned locations to fabricate, install, and implement improvements to drive waste down and increase efficiency and output.</li> <li>Collaborate in Kaizen activities, problem solving, and rapid improvement process events with both internal and external consultants, customers, and suppliers. This includes providing support to sustain all follow-throughs required to sustain the improvements initiated during those events, especially those concentrated on local improvement. &nbsp;</li> <li>Performing other duties as assigned.</li></ul>Job Dimensions:The incumbent will possess:<ul> <li>Willingness to work with shopfloor employees, interview, and document current condition</li> <li>Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation.</li> <li>Strong analytical and problem-solving skills: able to develop and use structured approaches to identify root causes and recommend resolutions</li> <li>Ability to manage multiple projects simultaneously to meet objectives and key deadlines</li></ul>QualificationsBasic Qualifications:<ul> <li>&nbsp;Bachelor of Science degree in Engineering from an accredited institution</li> <li>Must have excellent interpersonal and communication skills as well as exhibit initiative and a high level of energy</li> <li>Must be willing to spend time on the manufacturing shopfloor to learn and interact with employees</li> <li>Exhibit teamwork and go-getting attitude</li> <li>Good analytical/statistical problem-solving skills</li> <li>Strong working knowledge of Microsoft Office Suite, including Word, Excel and PowerPoint</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>Preferred Qualifications:<ul> <li>Bachelor’s Degree in Mechanical or Industrial Engineering highly desired,</li> <li>Exceptional Excel Spreadsheet creation, macros, and related data analysis skills</li></ul>The incumbent shall take such steps as necessary to assure that all employment practices under his/her control, including hiring, firing, promotions, and discipline, are conducted in a nondiscriminatory fashion and without regard to race, sex, religion, national origin, age or physical disability.&nbsp; Incumbent recognizes that accident prevention is equal to quality, production, delivery, and cost control and accepts the responsibility to work safety while promoting safety conscious among fellow employees.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Howmet Aerospace

Manufacturing Engineer - Entry Level, Continuous Improvement

ResponsibilitiesUnder the direction of the Lead Engineer for Continuous Improvement, this position is responsible for supporting and assisting the Continuous Improvement Organization (Business Unit and Manufacturing Plants) as “boots on the ground” in the organization, planning, implementation, and follow-through of manufacturing improvement initiatives.&nbsp; Correspondingly, the incumbent coordinates and leads a wide range of activities that are designed to improve on-time delivery, productivity, quality, cost, safety, and environmental performance. This position does not directly supervise other personnel. This position does support&nbsp;Operations Supervisors, Area Leads, and Plant Managers.This position is located in Wichita Falls, TX.Key Objectives:<ul> <li>Participate in the Howmet Business System implementation of continuous improvement initiatives and drive waste reductions utilizing Lean principles (JIT, Autonomation, Value Stream Mapping, Kaizen, 5S, Standard Work, Line/Cell Design, Single Piece Flow, Material Flow, Visual Management, SMED, TPM, Root Cause Problem Solving, etc.)</li> <li>Work out of the Wichita Falls, TX site as part of a team to reduce executional scrap.</li> <li>Create a system following ‘step by step’ procedures for the loading and unloading of large volume processing equipment.</li> <li>Coordinate with resource departments within the assigned locations to fabricate, install, and implement improvements to drive waste down and increase efficiency and output.</li> <li>Develop Value Stream maps of key processes and product flows. Define the current condition of the facility(ies) to identify opportunities and create a target condition, with action plans to improve operational and financial results.</li> <li>Complete value stream mapping, identify opportunities, and lead shopfloor manufacturing efforts in process reengineering and process improvements in various plants.&nbsp;</li> <li>Facilitate successful kaizen, problem solving, and rapid improvement process events with both internal and external consultants, customers, and suppliers. This includes providing support to sustain all follow-throughs required to sustain the improvements initiated during those events, especially those concentrated on local improvement. &nbsp;</li> <li>Performing other duties as assigned.</li></ul>Job Dimensions:The incumbent will possess:<ul> <li>Demonstrated experience in manufacturing improvement techniques, including flow principles, Kanban, and plan for every part (PFEP)</li> <li>Expertise in value stream mapping and associated improvement methodologies</li> <li>Understanding of pillars of Toyota production system (JIT, Autonomation)</li> <li>Experience evaluating TAKT time vs. cycle time, determining work area constraints (i.e. cycle time constraint, periodic work constraints, downtime constraints).</li> <li>Experience on shop floor, working with employees, and enhancing manufacturing processes</li> <li>Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation.</li> <li>Strong analytical and problem-solving skills: able to develop and use structured approaches to identify root causes and recommend resolutions</li> <li>Demonstrated experience in project leadership and project management skills, with ability to manage multiple projects simultaneously to meet objectives and key deadlines</li></ul>QualificationsBasic Qualifications:<ul> <li>At least two years&nbsp;of experience in manufacturing environments in areas such as: Operations, Engineering, Supply Chain, Quality, or Operational Excellence</li> <li>Bachelor of Science degree in Engineering from an accredited institution</li> <li>Must have knowledge and understanding of Continuous Process Improvement methodologies such as Lean and Six Sigma</li> <li>Must have excellent interpersonal and communication skills as well as exhibit initiative and a high level of energy</li> <li>Must be willing to spend time on the manufacturing shop floor to learn and interact with employees</li> <li>Ability to manage multiple projects simultaneously and drive change</li> <li>Exhibit teamwork and go-getting attitude</li> <li>Good analytical/statistical problem-solving skills</li> <li>Strong working knowledge of Microsoft Office Suite, including Word, Excel and PowerPoint</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>Preferred Qualifications:<ul> <li>Bachelors degree in Engineering Mechanical or Industrial highly desired</li> <li>Exceptional Excel Spreadsheet creation, macros, and related data analysis skills</li> <li>Three or more years of related experience highly desired</li></ul>The incumbent shall take such steps as necessary to assure that all employment practices under his/her control, including hiring, firing, promotions, and discipline, are conducted in a nondiscriminatory fashion and without regard to race, sex, religion, national origin, age or physical disability.&nbsp; Incumbent recognizes that accident prevention is equal to quality, production, delivery, and cost control and accepts the responsibility to work safety while promoting safety conscious among fellow employees.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Manufacturing Engineer - Continuous Improvement

3D Animation &amp; Game Design Animation Part-time Instructor (Spring 2026)UIW MissionPosition SummaryThe 3D Animation &amp; Game Design (ANGD) Program in the School of Media and Design seeks a part-time lecturer for 3D Animation to teachin-person Principles of Animation course(s). In all matters, faculty are expected to maintain the highest standards of professional ethics consistent with the UIW Mission. Official duties and responsibilities of faculty members at the University include teaching, scholarship, service, and professional activities as assigned.Essential FunctionsBasic Instructional Duties:• Prepare course outlines and teach one to two sections of first-year level Principles of Animation based on approved departmental syllabi; prepare and deliver consistent, interactive lectures.• Prepare timely and meaningful assessments for assigned courses.• Work collaboratively with departmental faculty to ensure standard curriculum outcomes are met.• Adhere to UIW policies and procedures, including timely record keeping of student activities, fair and equitable evaluation of student performance, and timely feedback to students regarding their performance in the course.• Be available outside of class to help students learn as well as answer their questions (1 hour per 3-hour class, physically and/or electronically).• Conduct respectful relationships with faculty, staff, and students both in and outside the classroom.• Maintain contact with the department chair and participate in meetings upon request.• Perform other duties as assigned.Job DutiesKnowledge Skills and Abilities• Ability to deliver instruction both in-person and online as needed;• Ability to effectively learn, use, and incorporate instructional technology into teaching;• Willingness and flexibility to teach day, evening and weekend sections as needed;• Expert knowledge of Maya as an animation tool;• Strong skills demonstrated in a demo reel and a desire to see and facilitate student success is critical;• Strong knowledge of SyncSketch for critiques;• Ability to work effectively with individuals from diverse communities and cultures;• Employee shall adhere to all applicable rules and regulations of the University, the Conference, and the NCAA.Required EducationBFA in Game Art, Game Design, or Animation.Required Work ExperienceSignificant experience in the game development industry in the field of 3D Character AnimationPreferred QualificationsTeaching experience at the college or university level.Required Certifications, Licenses or RegistrationsNone specified.Work HoursBased on course assignment.Physical DemandsTypical for faculty in this discipline.Posting Number: UN960POJob Type: Part TimeJob Category: FacultyDesired Start Date: 01/05/2026Position End Date (if temporary):Reports To: Dean, School of Media &amp; DesignSalary: $5,000 per studio courseOpen Date: 07/11/2025Close Date: 12/31/2025Open Until Filled: NoSpecial Instructions to ApplicantPlease be sure to include portfolio/SyncSketch/Vimeo/YouTube portfolio link.To apply, visit <a href="https://apptrkr.com/6377725UIW" target="_blank">https://apptrkr.com/6377725UIW</a> is committed to a policy of equal opportunity in employment, without regard to race, color, sex, sexual orientation, citizenship status, national origin, age, marital status, disability, genetic information, gender identity or expression, veteran status, pregnancy, and religion (except in limited circumstances when religious preference is both permitted by law and deemed appropriate as a matter of University policy).jeid-042aa91dba448a40a77281701ccbf19a

University of the Incarnate Word

3D Animation & Game Design Animation Part-time Instructor (Spring 2026)

ResponsibilitiesThis will be the general / primary functions for this role:<ul> <li>Prepare Plan for NPI projects and coordinate with all stakeholders to ensure good quality product.</li> <li>Coordinate with R &amp; D /New Product Development groups to develop strategies for new products.</li> <li>Provide engineering support for all activities in product development process.</li> <li>Prepare project timelines and identify all resources, requirements &amp; financials for new processes.&nbsp;</li> <li>Monitor status of all new products and ensure effective execution of projects according to required policies, procedures and government regulations.</li></ul>Job Responsibilities<ul> <li>Coordinate with engineering and product management departments while developing and implementing Manufacturing Plans for product.</li> <li>Assist Manufacturing department and manage communication across all departments.</li> <li>Develop product test plans and perform productions test according manufacturing process instructions.</li> <li>Assist New Product Introduction Manager and Process Engineering Manager with integration of all products according to product requirements.</li> <li>Monitor operations of product and evaluate designs and ensure adherence to all design and manufacturing principles.&nbsp;</li> <li>Ensure compliance to all ECO procedures and work instructions.</li> <li>Work with design engineering and assist in transition of design prototypes into cost efficient and high-volume products.</li> <li>Provide Technical support to Materials Management team for all RFP initiatives and administer effective use of outsource products.</li> <li>Develop prototype design according with required techniques and manufacturing processes.</li> <li>Work with warehouse Manager to maintain required inventories, ensure availability of equipment, tools, test equipment and prototype parts.</li> <li>Analyze and recommend improvements to all production process and methods to facilitate better throughput and quality improvements.</li> <li>Design/ implement efficient material handling, flow strategies and maintain safe manufacturing processes at all times.</li> <li>Analyze and recommend corrective action in case of any design failure.</li> <li>Coordinate with senior management and maintain knowledge of product status and prepare appropriate reports.</li> </ul>QualificationsEducation&nbsp;<ul> <li>Engineer Degree, High School Diploma or&nbsp;</li> <li>GED Equivalent or 3 years of Experience in the position.</li></ul>Skills and Abilities<ul> <li>Microsoft office, basic PC skills.</li> <li>Ability to operate mobile equipment.</li> <li>Bilingual Spanish-English a plus.</li></ul>Experience<ul> <li>Good computer skills including Microsoft office applications.</li> <li>Good business communication skills including the ability to write simple correspondence, verbally communicate to customers, clients and other employees.</li> <li>Ability to read and comprehend simple instructions, short correspondence, and memos and to apply commonsense understanding to carry out carry out detailed but uninvolved written or oral instructions.&nbsp; &nbsp;</li></ul>About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

ENGINEER LAUNCH LEADER

3D Animation &amp; Game Design - Senior Portfolio - Part-time Lecturer (Academic Year 2025-2026)UIW MissionPosition SummaryThe 3D Animation &amp; Game Design (ANGD) Program in the School of Media and Design seeks a part-time lecturer to teach Senior Portfolio in the areas of 3D Modeling. In all matters, faculty are expected to maintain the highest standards of professional ethics consistent with the UIW mission. Official duties and responsibilities of faculty members at the University include teaching, and other activities as assigned.Essential FunctionsBasic Instructional Duties:• Prepare course outlines based on approved departmental syllabi.• Deliver synchronous online instruction to 3D Animation and Game Design students via Microsoft Teams.• Prepare and execute timely and meaningful assessments for assigned courses.• Work collaboratively with departmental faculty to ensure standard curriculum outcomes are met.• Be available outside of class to help students learn and to answer their questions (1 hour per 3-hour class, physically and/or electronically.)• Adhere to UIW Faculty Handbook policies and procedures, including timely record keeping of student activities, fair and equitable evaluation of student performance, and timely feedback to students regarding their performance in the course.• Conduct respectful relationships with faculty, staff, and students both in and outside the classroom.• Maintain contact with the department chair and participate in meetings upon request.• Perform other duties as assigned. Job DutiesKnowledge Skills and Abilities• Ability to work with the director of the 3D Animation &amp; Game Design program to develop and deliver instruction on industry-standard skills in the field of 3DModeling;• Knowledge of game development industry norms and pipelines;• Must be knowledgeable and experienced in at least one industry-standard engine (preferably Unity or Unreal);• Ability to effectively learn and use instructional technology.• Willingness and flexibility to teach day, evening and weekend sections, as needed;• Ability to incorporate technology into teaching;• Ability to work effectively with individuals from diverse communities and cultures;• Employee shall adhere to all applicable rules and regulations of the University, the Conference, and the NCAA.Required EducationBFA or BS in Game Design, Game Programming, Computer Science, or Game Production.ORBachelor's Degree in relevant discipline. Note that education of less than Bachelor's Degree with at least five (5) additional years of significant experience in the field of modeling will be considered.Required Work ExperienceSignificant experience in the game development industry in the field of modeling.Preferred QualificationsBoth teaching and industry experience.Required Certifications, Licenses or RegistrationsN/A.Work HoursBased on course assignment.Physical DemandsTypical for faculty in this discipline.Posting Number: UN926POJob Type: Part TimeJob Category: FacultyDesired Start Date: 08/18/2025Position End Date (if temporary):Reports To: Dean, School of Media &amp; DesignSalary: $4000 lecture courses-$5000 studio courses or based on enrollmentOpen Date: 04/09/2025Close Date:Open Until Filled: YesSpecial Instructions to ApplicantNone.To apply, visit <a href="https://apptrkr.com/6314341UIW" target="_blank">https://apptrkr.com/6314341UIW</a> is committed to a policy of equal opportunity in employment, without regard to race, color, sex, sexual orientation, citizenship status, national origin, age, marital status, disability, genetic information, gender identity or expression, veteran status, pregnancy, and religion (except in limited circumstances when religious preference is both permitted by law and deemed appropriate as a matter of University policy).jeid-b9209d156e01b24397f7276d3bd03730

3D Animation & Game Design - Senior Portfolio - Part-time Lecturer (Academic Year 2025-2026)

3D Animation &amp; Game Design - Senior Portfolio - Part-time Lecturer (Academic Year 2025-2026)UIW MissionPosition SummaryThe 3D Animation &amp; Game Design (ANGD) Program in the School of Media and Design seeks a part-time lecturer to teach Senior Portfolio in the areas of 3D Modeling. In all matters, faculty are expected to maintain the highest standards of professional ethics consistent with the UIW mission. Official duties and responsibilities of faculty members at the University include teaching, and other activities as assigned.Essential FunctionsBasic Instructional Duties:• Prepare course outlines based on approved departmental syllabi.• Deliver synchronous online instruction to 3D Animation and Game Design students via Microsoft Teams.• Prepare and execute timely and meaningful assessments for assigned courses.• Work collaboratively with departmental faculty to ensure standard curriculum outcomes are met.• Be available outside of class to help students learn and to answer their questions (1 hour per 3-hour class, physically and/or electronically.)• Adhere to UIW Faculty Handbook policies and procedures, including timely record keeping of student activities, fair and equitable evaluation of student performance, and timely feedback to students regarding their performance in the course.• Conduct respectful relationships with faculty, staff, and students both in and outside the classroom.• Maintain contact with the department chair and participate in meetings upon request.• Perform other duties as assigned. Job DutiesKnowledge Skills and Abilities• Ability to work with the director of the 3D Animation &amp; Game Design program to develop and deliver instruction on industry-standard skills in the field of 3DModeling;• Knowledge of game development industry norms and pipelines;• Must be knowledgeable and experienced in at least one industry-standard engine (preferably Unity or Unreal);• Ability to effectively learn and use instructional technology.• Willingness and flexibility to teach day, evening and weekend sections, as needed;• Ability to incorporate technology into teaching;• Ability to work effectively with individuals from diverse communities and cultures;• Employee shall adhere to all applicable rules and regulations of the University, the Conference, and the NCAA.Required EducationBFA or BS in Game Design, Game Programming, Computer Science, or Game Production.ORBachelor's Degree in relevant discipline. Note that education of less than Bachelor's Degree with at least five (5) additional years of significant experience in the field of modeling will be considered.Required Work ExperienceSignificant experience in the game development industry in the field of modeling.Preferred QualificationsBoth teaching and industry experience.Required Certifications, Licenses or RegistrationsN/A.Work HoursBased on course assignment.Physical DemandsTypical for faculty in this discipline.Posting Number: UN926POJob Type: Part TimeJob Category: FacultyDesired Start Date: 08/18/2025Position End Date (if temporary):Reports To: Dean, School of Media &amp; DesignSalary: $4000 lecture courses-$5000 studio courses or based on enrollmentOpen Date: 04/09/2025Close Date:Open Until Filled: YesSpecial Instructions to ApplicantNone.To apply, visit <a href="https://apptrkr.com/6309061UIW" target="_blank">https://apptrkr.com/6309061UIW</a> is committed to a policy of equal opportunity in employment, without regard to race, color, sex, sexual orientation, citizenship status, national origin, age, marital status, disability, genetic information, gender identity or expression, veteran status, pregnancy, and religion (except in limited circumstances when religious preference is both permitted by law and deemed appropriate as a matter of University policy).jeid-6f137e18493bcf459b9e048400c9d3de

ResponsibilitiesJob SummaryThis position is responsible for facilitating the implementation and maintenance of Environmental, Health, and Safety (EHS) systems, including Safety, Industrial Hygiene, Environmental, and Medical programs at the Howmet-Waco facility. The role ensures compliance with safety regulations, conducts audits, and provides training to promote a safe and healthy work environment.&nbsp; &nbsp;Responsibilities&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<ul> <li>Partner with Waco line organization regarding Howmet Aerospace standards and procedures to achieve a zero-incident workplace.</li> <li>Assist in implementing the EHS BU plan in accordance with the incident prevention and environmental programs.</li> <li>Coordinate with other BU sites as needed; assist with corporate initiatives &nbsp;</li> <li>Assess risk associated with manufacturing processes and act to minimize risks.</li> <li>Determine corrective actions as a result of hazards identification.&nbsp;</li> <li>Perform risk assessments.&nbsp;</li> <li>Lead and/or facilitate location EHS teams as assigned.</li> <li>Educate line organization personnel to ensure compliance with all EHS regulatory requirements and Howmet Aerospace standards.</li> <li>Provide specialized EHS expertise and assist in developing location knowledge of EHS regulations and corporate standards.</li> <li>Experience required in defining, obtaining, and coordinating necessary EHS reports, permits, communications, EHS self-assessments (ASATs) and FMEA program for the location.</li> <li>Develop and update EHS written policies, procedures, programs and safe work instructions.&nbsp;</li> <li>Incorporate Human Performance principles into assigned programs.</li> <li>Develop and facilitate EHS training.</li> <li>Assist in coordinating fire and other emergency drills.&nbsp;</li> <li>Assist the EHS SPAs with their programs and lead assigned programs to meet legal and other requirements.</li> <li>Provide a consistent presence on the production floor. Position requires boots on the ground for safety oversight.&nbsp;</li> <li>Attend leadership meetings as required.&nbsp;</li> <li>Review and submit EHS incidents into Incident Management System.&nbsp;</li> <li>Inspects the facility for signs of non-compliance; this includes housekeeping, blockage of emergency exits, incorrect use of equipment or safety accessories, etc.</li> <li>Ensure environmental and industrial hygiene sampling and monitoring compliance (Air, Water &amp; Soil) including but not limited to Asbestos, Lead, Microbiological (fungi &amp; Bacteria), IAQ, Metals, VOC’s, PCB’s and other materials as requested.</li> <li>Observes contractors for non-compliance issues.</li> <li>Application of OSHA, EPA,TECQ, NFPA, and ANSI standards.&nbsp;</li> <li>Support and provide insight for projects performed within the facility.&nbsp;</li> <li>Drive/provide continuous improvement initiatives.</li> <li>Monitor hygiene programs.&nbsp;</li> <li>This position may require occasional on-call availability to address urgent issues outside of regular business hours</li></ul>QualificationsQualificationsBasic&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<ul> <li>Bachelor’s degree from an accredited institution; degree preferred to be in Environmental Science, Occupational health and Safety, Engineering, or related field.</li> <li>3+ years of relevant experience in an EHS role</li> <li>Proficient in risk assessment</li> <li>Ability to conduct safety audits and investigations</li> <li>Data analysis skills</li> <li>Capacity to work collaboratively with different departments to implement safety measures and ensure compliance across an organization</li> <li>Minimum of two years of experience in managing and reporting on environmental programs in coordination with municipal authorities and the Texas Commission on Environmental Quality (TCEQ)</li> <li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li> <li>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status.&nbsp; ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.</li></ul>Preferred<ul> <li>Completed OSHA 511 1910&nbsp;</li> <li>Emergency Medical Training highly desirable (EMT-B, Medic, CPR Certification, etc.)</li> <li>Experience in performing boots on the ground safety oversight</li> <li>Experience with emergency response crews in incidents involving hazardous and non-hazardous material releases to air, soil and water&nbsp;</li> <li>Demonstrated strong propensity for hands-on work and attention to detail.</li></ul>About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Environmental, Health, and Safety (EHS) Engineer

About Us: Mitsubishi Logisnext Americas Inc. has helped customers Move The World Forward for more than 100 years as a technology-driven forklift manufacturer. In addition to being a forklift manufacturer, we are also a total solutions provider offering scalable products and services from material handling and automation to extensive fleet support. About the role: Position is responsible for the successful Engineering of New Products. Hands-on role responsible for the Electrical Engineering with a focus on original embedded Software code.&nbsp; Projects typically include vehicle control systems, IoT connectivity, and autonomous controls integration. Non-software related responsibilities may include, development of electrical schematics, CAN Network design, selection of electrical components. Objective is for the development of the vehicle Electrical System, Subsystems and Components to meet project targets for Quality, Cost &amp; Timing. This is a hands-on design and release Engineer position. What you will do: <ul><li>Design and release of Electrical Systems, software, in-line with project plan.</li><li>Identify and recommend options for engineering solutions, improving quality, reducing cost, improving time to market.</li><li>Plan, schedule and implement project tasks within targeted cost, quality and timing deadlines.</li><li>Lead and support building and testing of prototypes.</li><li>Organizes and analyzes test and design analysis data.</li><li>Ensures cross functional engagement and requirements with Mechanical Engineering, Manufacturing-DFM, Service-DFS.</li><li>Works with suppliers to communicate requirements and apply latest technology.</li></ul> When &amp; Where: 8-5 hybrid Travel 10% of the time What you need to have: <ul><li>BSEE 4+ years relevant experience (material handling, Automotive, Off-highway, or similar).</li><li>Demonstrable experience producing/configuring application code for new products and new features.</li><li>Working knowledge of common embedded programming languages (Python, C++, Script, etc.).</li><li>Working knowledge/experience with methodical, structured problem solving (8D, 5 Why's, Fishbone, etc.)</li><li>Knows basic electrical instruments like multimeter, oscilloscope, CAN simulation and testing tools such as Vector CANalyzer/ PEAK CAN etc.</li><li>Able to read &amp; create electrical schematics, and troubleshoot electrical circuits.</li><li>Proficiency in C programming and solid knowledge in data structures</li><li>Experience with embedded software development process and software repository and version control tools such as GitHub</li></ul> What would be nice to have: <ul><li>Systems Engineering (Electrical) design, creating project timelines and requirements experience.</li><li>Hands-on experience with design, testing and troubleshooting of&nbsp; electric motor, controller design concepts and other electrical systems</li><li>Proficiency in C programming and solid knowledge in data structures and embedded software development process</li><li>Solid knowledge in vehicle communication protocols such as CAN (ISO 11898-1&amp;2), CANOpen and J1939 (Full protocol stack).</li><li>Knowledge of safety standards such as UL 558 and 583 and ISO.</li><li>Basic knowledge of how internal combustion and electric vehicles work (engines, transmissions, user interfaces, batteries, chargers, etc.).</li></ul> What we offer: <ul><li>Medical, dental, and vision benefits</li><li>Paid Vacation, Sick Time, and Paid Holidays </li><li>Profit Sharing Opportunities</li><li>Flexible Spending and HSA Accounts</li><li>401k with automatic company contribution and company match</li><li>Short-term and long-term disability insurance</li><li>Life, Dependent Life, and AD&amp;D Insurance</li><li>Paid Parental Leave (Includes 6-8 weeks of maternity leave and 5 days of paternity leave)</li><li>Employee Assistance Program </li><li>Employee Discounts</li><li>On-site fitness center (Houston)</li><li>On-the-job training and development</li></ul> The pay for this position ranges from $94,129 to $126,665 annually. The specific salary for a successful candidate will depend upon, among other legitimate factors, education, training, and/or experience. To be considered for this role, all applicants must submit a full and complete application through our careers page. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment visa at this time. Equal Opportunity Employer/Veterans/Disabled Agency Disclaimer: Mitsubishi Logisnext Americas Inc. does not accept unsolicited resumes from third party vendors. Any unsolicited resumes from a third party will become the property of the company to use at the company’s discretion, with the understanding that Mitsubishi Logisnext Americas, Inc. will not be billed a fee for any such resumes. If a company is designated as an approved vendor, then said company can only provide assistance on those positions requested via a formal written agreement of support.

Mitsubishi Logisnext Americas Inc.

Senior Electrical Software Engineer

ResponsibilitiesHowmet Aerospace, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit&nbsp;<a href="http://www.howmet.com/" target="_blank">www.howmet.com</a>. Follow @howmet:&nbsp;Twitter,&nbsp;Instagram,&nbsp;Facebook,&nbsp;LinkedIn&nbsp;and&nbsp;YouTube.&nbsp;The Process&nbsp;Engineer- Machining position will be in our Wichita Falls, Texas facility and will support manufacturing through process control, improvement initiatives, and assume direct responsibility for integrity for assigned products.&nbsp;This involves quoting new developmental parts, attending to product engineering concerns for developmental parts, assisting with obtaining new business, working to improve existing processes, developing and using new technologies, and providing technical support to Howmet Aerospace, Wichita Falls. &nbsp;&nbsp;Job Responsibilities:&nbsp;This position is responsible for developing robust processes that consistently meet or exceed our customers’ requirements for the metallurgical quality and performance of aerospace components.&nbsp; Also, continuous improvement of processes by improving methods and developing new methods of manufacturing, leading to increased yields and reduced labor content.&nbsp;<ul> <li>External customer escapes - Investigates and analyzes root cause; develops and implements correction action plans.</li> <li>Part Qualification and Re-qualification - Determines and supports manufacturing requirements necessary to meet customer requirements; performs metallurgical investigations; assembles process documentation per customer requirements.</li> <li>Process Development and Improvement - Monitors/analyzes yield, labor, and materials data to develop process improvement ideas for new and established processes.</li> <li>Manufacturing Support - Monitors manufacturing output to ensure process control; Responds to manufacturing needs: training, work instructions and interpretation; Creates and updates work instructions needed to perform manufacturing processes.</li> <li>General Technical Support - Conducts meetings and provides technical data to meet customer needs.&nbsp;</li> <li>NPI Concurrent Engineering - Conducts meetings with customers to review design concepts.</li> <li>Quotation Prep - Develops material, scrap and labor costs for cost modeling.</li> <li>Tooling Development and Build - Attends NPI meeting and provides input based on customer specifications for BOM, routings and milestone plans.</li></ul>JOB FUNCTIONS:<ul> <li>Troubleshoot operations including but not limited to fixturing/clamping issues, program and/or parameter issues and expendable tooling issues until problem is resolved.</li> <li>Design fixturing using the fixture maintenance program or any other mistake proofing method to increase yields on high scrap operations/programs to support scrap reduction initiatives and reduce human error.</li> <li>Time study jobs to balance and define operator standard work.&nbsp; Generate standard work charts and process capacity table and compare actual performance to quoted estimates in current cost models.</li> <li>Utilize SPC charts and other process capability methods to increase first time yields to within quoted standards.</li> <li>Perform process planning and development of newly awarded product (NPI), to include tooling procurement, standard routings, bill of materials, etc.</li> <li>Use data analysis tools (Power BI) process to identify gaps in shop floor performance to standard and make appropriate method improvements to bridge/close gaps.&nbsp; This to include scrap and rework costs.</li> <li>Use APQP tool to identify, reduce risks of scrap and escapes.</li> <li>Assist in cost estimating effort for repeat production jobs as well as for all new product introduction (NPI) requests.</li> <li>Implement and participate in cost saving initiatives.</li> <li>Act as technical liaison with customer, suppliers and other Howmet plants in regard to processes, purchase orders, specifications and customer drawings as issues arise.</li> <li>Research, analysis and cost justification of equipment procurement.</li> <li>Actively participate in continuous improvement events and initiatives.</li> <li>Provide technical support to the shop floor personnel.</li> <li>Perform all other job duties as assigned.</li></ul>Job Roles:&nbsp;<ul> <li>Systems thinker--sees the business and its operation holistically; understands actions and reactions; considers multiple pathways of potential effect before decisions; thinks strategically about interventions with an eye toward scale</li> <li>Optimizer--constantly challenging the organization to work smarter; supports others to ensure they have what they need to do their work successfully</li> <li>Anticipation--looks ahead to minimize potential issues and maximize advantages; prepares others for what comes next</li> <li>Operational accelerator--drives continuous improvement; understands ramifications of automation and other advances; advocates for safety, ergonomics and scalable solutions</li> <li>Organization and structure--works within existing structures while striving to improve and standardize them; provides accurate information; galvanizes others toward common goals</li> <li>Influence--leverages knowledge, relationship, data and perspective to persuade, educate and navigate; gains buy in and adoption of ideas and practices at scale; interacts with a variety of stakeholders</li> <li>Data informed--focused on things that drive quantifiable business outcomes; evaluates based on quantitative feedback; knows and explains the “why” behind actions</li> <li>Prioritized reaction--handles the unexpected without losing sight of important objectives; reacts where greatest leverage points exist</li> <li>Relationship--connects individually and with teams across shifts and practices; builds rapport and commonality; creates a “win together” ethic; serves as liaison between shop floor and engineering; keeps the pulse of the floor; helps people feel heard</li></ul>QualificationsBasic Qualifications<ul> <li>Bachelor’s degree in Engineering from an accredited institution.</li> <li>2 years of engineering or operations experience in a manufacturing environment.</li> <li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>Preferred Qualifications<ul> <li>Experience in a machining, aerospace or industrial gas turbines operation.</li> <li>Aerospace specification knowledge</li> <li>Master's degree in a technical field</li> <li>Ability to solve problems and identify root cause and corrective action(s).</li> <li>Proficient in Microsoft Office software and CAD cam programs.</li> <li>Working knowledge of statistical processing analysis tools.</li> <li>Training and Experience with Lean Manufacturing and Six Sigma Tools.</li></ul>About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Process Engineer-Machining

Commitment to MissionThis job carries with it the obligation to uphold the Mission of Lone Star College (LSC) in carrying out the duties of the position. A commitment to positive interpersonal behaviors, professional communication, integrity, leadership, stewardship, respect and accountability to LSC students and employees is essential.Cultural Beliefs<ul><li>One LSC</li><li>Student Focused</li><li>Own It</li><li>Foster Belonging</li><li>Cultivate Community</li><li>Choose Learning</li></ul>The Chronicle of Higher Education's "Great Colleges to Work For®" is designed to recognize colleges that have been successful in creating great workplaces and to further research and understanding of the factors, dynamics and influences that have the most impact on organizational culture at higher education institutions.Lone Star College has been recognized in multiple categories.Campus Marketing StatementLone Star College-KingwoodLone Star College offers high-quality, low-cost academic transfer and career training education to 80,000+ students each semester. LSC has been named a 2023 Great Colleges to Work For® institution by the Chronicle of Higher Education. LSC consists of eight colleges, seven centers, eight Workforce Centers of Excellence and Lone Star Corporate College.Lone Star College-Kingwood, an innovative and dynamic community college located in the pine-forested suburbs of northeast Houston, has an opening for someone interested in working with a diverse group of colleagues who want to make a difference in the lives of students and grow professionally. Kingwood focuses on fulfilling individual dreams and enhancing community life and offers unique programs in respiratory care, computer gaming and dental hygiene.Location address is 20000 Kingwood Drive, Kingwood, TX 77339.Job DescriptionPURPOSE AND SCOPE:Under direct supervision, this position is responsible for routine lab preparation duties. May be responsible for tracking laboratory equipment and supplies. This position refers problems to experts as needed. Activities involve a variety of routine tasks such as cleaning makerspace, and many non-routine tasks that require independent judgment to resolve issues.ESSENTIAL JOB FUNCTIONS:<ul><li>Supports lab manager and faculty in preparation and delivery of labs</li><li>Assists students with lab equipment such as 3D printers, scroll saw, and soldering irons</li><li>Upholds safety practices in the lab</li><li>Provides routine lab support including all aspects of lab safety, cleaning, and organizing, and inspection and maintenance of lab classrooms including equipment and supplies needed for each class period</li><li>Performs record keeping for any supplies that need to be ordered and replaced</li><li>Works with faculty and students as needed, especially staffing Open Lab periods for student independent work; Ensures proper supplies and safety procedures during this time</li><li>Responsible for other reasonable, related duties as assigned</li></ul>KNOWLEDGE, SKILLS AND ABILITIES:<ul><li>Must be computer literate</li><li>Safety record and safety consciousness</li><li>Flexible and creative to perform multiple tasks simultaneously</li><li>Ability to work with a diverse group of faculty and staff</li></ul>PHYSICAL ABILITIES:The work is sedentary. Typically, the employee sits comfortably to do the work. However, there may be some walking; standing; bending; carrying of light items, such as papers, books, or small parts; or driving an automobile. No special physical demands are required to perform the work.WORK SCHEDULE AND CONDITIONS:<ul><li>Equipment used includes, PC workstation running on a LAN in a Microsoft Windows environment, calculator, phone and other general office equipment, and 3D printer, scroll saw, soldering irons, and basic shop equipment</li><li>Interface with internal and external contacts as needed to carry out the functions of the position</li><li>Work is performed in a climate-controlled office and/or laboratory environment with exposure to safety hazards typical in a laboratory (working with glue, paint, solder, 3D printers) </li><li>Safety protocol must be strictly followed at all times. Keep fans on for proper ventilation, use safety goggles, and properly dispose of batteries and other materials.</li><li>Work schedule is flexible around student class and work schedule, but priority will be given to staffing at peak demand times for engineering labs</li></ul>REQUIRED QUALIFICATIONS:<ul><li>High School Diploma or GED and at least 1 year of related work experience, or an equivalent combination of education and experience</li><li>Completion of appropriate college level science coursework</li></ul>SalaryHourly Pay Rate is $13.52Benefits Marketing StatementBy joining our top-notch institution, you will enjoy being a part of an organization that offers a supportive, collegial work environment, excellent work/life balance, tuition waiver, participation in a tax deferred retirement plan and more.Special InstructionsGo to the Job Search page, click on ‘My Activities’ at the top of the page. Under My Cover Letters and Attachments you will click on ‘Add Attachment.’ Please be sure to put the Job ID# in the title once you name your file for cover letters only, unless you attached your cover letter with your resume.If you are applying for an Instructional position (i.e. Faculty, Adjunct Faculty, Instructor), please ensure you include the following to be considered: Resume/CV, Cover Letter, Teaching Philosophy, and unofficial transcripts. You must limit your file name for any attachment to 40 characters or less.How to ApplyALL APPLICANTS MUST APPLY ONLINE ONLYWe will not accept application material received via fax, email, mail, or hand delivered.Postings for part-time and adjunct positions are active for the academic year. By selecting the option to receive notifications on your profile, you will begin receiving electronic communication regarding new opportunities with Lone Star College (LSC).If selected for an interview, a recruiter will contact you by phone, or email to schedule an interview.Lone Star College participates in the E-Verify program, under which Lone Star College provides the federal government with information from each new employee's Form I-9 to confirm that the employee is authorized to work in the United States.More information on the E-Verify program is available at <a href="http://www.dhs.gov/E-Verify" target="_blank">www.dhs.gov/E-Verify</a>.Lone Star College is an EEO Employer. All positions are subject to a criminal background check.

53 Engineering Jobs in Texas