field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

Description Idaho National Laboratory is hiring a Chemical Engineer to work on our Applied Uranium Team. Our team works a 9x80 schedule located out of our Idaho Falls facility with every other Friday off.&nbsp; The Applied Uranium Technologies Department is in the Nuclear Science and Technology directorate and is part of the Integrated Fuel Cycle Solutions initiative at INL.&nbsp; We support the safe, secure, and economic management of nuclear materials from inception to final disposition by ensuring availability of special nuclear materials and strategic isotopes, reducing proliferation risks, managing radiological waste materials and used nuclear fuels and developing research, development, and deployment test beds.&nbsp; We perform research from bench-scale to applied engineering demonstrations.&nbsp; We have many areas of research interest including flowsheet development and testing for advanced fuel cycles and critical materials recovery/separation, Off-gas capture (I and Kr/ Xe), High-assay LEU recovery from zirconium and aluminum fuels, HEU/HALEU polishing/down-blending/conversion, National security mission, and Critical and Strategic Minerals and Materials Initiative research and collaborations.&nbsp; Responsibilities Include: <ul><li>Apply chemical engineering principles to design, test, start-up, operate, and maintain chemical processes.</li><li>Prepare process flow diagrams, heat and material balances, and determine chemical process equipment requirements.</li><li>Document design to ensure conformance with requirements and standards.</li><li>Establish testing, inspection, and quality requirements.</li><li>Ensure fabrication, construction, assembly, and procurement are done per design specifications.</li><li>Develop processes for separating components of liquids and gases or generating electrical currents using controlled chemical processes.</li><li>Develop and implement process controls and tracking mechanisms using programming.</li><li>Prepare process flow diagrams and heat/material balances.</li><li>Establish process design and operating parameters through simulations, hazards analysis, and testing.</li><li>Monitor and evaluate plant system conditions and operational performance, recommend maintenance standards, and identify vendor data and replacement parts.</li><li>Participate in system design, fabrication, and testing for research and development programs.</li><li>Perform laboratory research studies to prove new principles and concepts.</li><li>Maintain familiarity with applicable codes and standards.</li><li>Identify new research opportunities, contribute to technical teams, respond to research opportunities, and assist in securing funding for research activities.</li></ul>Qualifications Minimum Requirements:&nbsp; <ul><li>Level 3: Bachelor of Science degree in Chemical Engineering or a directly related engineering field from an ABET-accredited institution and 5 years of relevant experience. Masters in the same and 2 years relevant experience. PhD and 2 years of relevant experience.</li><li>Level 4:&nbsp;Bachelor of Science degree in Chemical Engineering or a directly related engineering field from an ABET-accredited institution and 9 years of relevant experience. Masters in the same and 6 years relevant experience. PhD and 4 years of relevant experience.</li><li>Strong verbal and written communication skills.</li><li>This position requires the ability to obtain and maintain a Department of Energy "Q" clearance, which requires US Citizenship.&nbsp;</li></ul> Preferred Experience:&nbsp; <ul><li>Solvent Extraction / Separation&nbsp;</li></ul> Job Information:&nbsp; <ul><li>The pay range for this position is: Level 3 $93,204.00 - $191,076.00 / Level 4 $111,888.00 - $229,284.00. At Idaho National Laboratory compensation decisions are determined using factors such as education, relevant experience, and other credentials.&nbsp;</li><li>TDP: This is a testing designated position; you will be required to submit to a pre-employment drug screen and periodic drug testing throughout the term of your employment.&nbsp;</li><li>Multi-Level: This is a multi-level posting and you will be placed at the appropriate level dependent on depth and breadth of proven experience and skills.&nbsp;</li></ul> Physical Requirements <ul><li>Frequent standing, walking, sitting, stooping, and bending.</li><li>Hand/finger dexterity for keyboarding and tool manipulation.</li><li>Occasional lifting/moving up to 25 pounds without assistance.</li><li>Sufficient visual and hearing capacity for essential functions and public interaction.</li><li>Reasonable accommodations for individuals with disabilities.</li></ul> Benefits and Relocation <ul><li>Medical, Dental, Vision, and Flexible Spending Accounts</li><li>401(k) with a 4.2% employer contribution and up to 4.8% match</li><li>Paid time off (personal leave)</li><li>Employee Education Program (tuition assistance)</li><li>Comprehensive Relocation Package</li><li>Benefit eligibility subject multiple factors, including employment status and position classification.</li></ul> INL is a science-based, applied engineering national laboratory dedicated to supporting the U.S. Department of Energy’s mission in nuclear energy research, science, and national defense. With more than 5,000 scientists, researchers, and support staff, the laboratory works with national and international governments, universities and industry partners to discover new science and development technologies that underpin the nation’s nuclear and renewable energy, national security, and environmental missions. INL Mission Our mission is to discover, demonstrate and secure innovative nuclear energy solutions, other clean energy options and critical infrastructure. INL Vision Our vision is to change the world’s energy future and secure our nation’s critical infrastructure. Selective Service Requirements To be eligible for employment at INL males born after December 31, 1959 must have registered with the Selective Service System (SSS). For more information see <a href="http://www.sss.gov" target="_blank">www.sss.gov</a>. Equal Employment Opportunity Idaho National Laboratory (INL) is an Equal Employment Opportunity (EEO) employer. It is the policy of INL to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information.&nbsp; Reasonable Accommodation We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Other Information When applying to positions please provide a resume and answer all questions on the following screens. Applicants, who fail to provide a resume or answer the questions, may be deemed ineligible for consideration. INL does not accept resumes from third party vendors unsolicited.

Idaho National Laboratory

Chemical Engineer

Join our dynamic team and shape the future of advanced manufacturing and automation! We're looking for an Assistant Professor of Mechatronics to inspire and educate the next generation of technicians and engineers, beginning Fall 2025 semester.&nbsp; As a key faculty member, you'll develop and deliver engaging coursework, oversee lab experiences, and help students gain the critical skills needed for careers in mechatronics and industrial automation. You'll also collaborate with colleagues and local industry leaders to keep our program cutting-edge and aligned with workforce demands. Our ideal candidate is a hands-on educator with expertise in PLCs, automation, and electromechanical systems. Skilled in troubleshooting, control theory, and programming (C, C++, Python), our next instructor will effectively teach complex concepts while emphasizing safety and real-world applications. Join us in shaping the next generation of mechatronics professionals"”your expertise in communication, blueprint interpretation, and applied math will inspire and prepare students for success! <a href="https://www.nic.edu/hr/benefits/" target="_blank">Enjoy excellent benefits, including retirement&nbsp;</a>&nbsp; 9 sick days per year 2 personal days Tuition assistance Job Description linked below; (some job boards may not include active links so please click Apply Now on the NIC website or go to&nbsp;<a href="http://www.nic.edu/jobs" target="_blank">www.nic.edu/jobs</a>&nbsp;to see full details);&nbsp; &nbsp;<a href="https://secure.dc4.pageuppeople.com/apply/TransferRichTextFile.ashx?sData=UFUtVjMt7e9_DzC1RbG1DQTt7eSWnskDy7JIn96XTtS-sPxaX60oMjpOqY2phG1kybsl8EfGNUmhZGsHpFr8szc5mu5un4-d8G2PRI09D6Pwsi-mlI_V13q19Xh-eNuwDOkyXA3eSV0OachOFPOyxEPD0Y1wyA%7e%7e" target="_blank">Assistant Professor-Mechatronics.docx</a> Work Site Location: Parker Technical Education Work Schedule:&nbsp;This position has summers off!&nbsp;Regular schedule is mid-Aug to mid-May with pay and benefits over 12 months. Starting pay range:&nbsp;&nbsp;$47,328 - $70,554 Pay Grade:&nbsp;<a href="https://www.nic.edu/hr/salary-structures/" target="_blank">To see full Faculty Pay Grade Salary Structures click here&nbsp;</a><a href="https://www.nic.edu/websites/default.aspx?dpt=34&amp;pageId=12737" target="_blank">&nbsp;</a> This Special Appointment position is dependent upon an Industry Sector Grant funded by the Idaho Workforce Development Council through September 2026 and could be extended based on the needs of the program and continued funding. Minimum Qualifications Education and Experience:&nbsp; Associate's degree in a related field and six (6) years of recent full-time equivalent experience in an area related to the needs of the program OR a Bachelor's degree in a related field and four (4) years of recent full-time equivalent experience related to the needs of the program; or an equivalent combination of education and experience. Demonstrated sensitivity to the needs of students, faculty, and staff from multi-cultural backgrounds. Required License and/or Certifications: "¢ Must achieve related Idaho CTE Postsecondary Limited Occupational Specialist Certification within first 12 months of employment. Employment is contingent upon successful completion of background check and proof of degree if required&nbsp;for this position.&nbsp; Application materials include;&nbsp;&nbsp;resume, cover letter, and unofficial transcripts&nbsp; Applications ONLY accepted through the North Idaho College Website! Advertised: February 28, 2025

North Idaho College

Assistant Professor - Mechatronics

At American Express, our culture is built on a 175-year history of innovation, shared values and Leadership Behaviors, and an unwavering commitment to back our customers, communities, and colleagues. As part of Team Amex, you'll experience this powerful backing with comprehensive support for your holistic well-being and many opportunities to learn new skills, develop as a leader, and grow your career.Here, your voice and ideas matter, your work makes an impact, and together, you will help us define the future of American Express.Joining Amex Tech means discovering and shaping your contribution to something big. Here, you can work alongside talented tech teams and build a unique career with the Powerful Backing of American Express. With a range of opportunities to work with the latest technologies, and a commitment to back the broader engineering community through open source, our mission is to power your success. Because Amex Tech is powered by our technology, our culture, and our colleagues.Who we are:The&nbsp;Finance Data Engineering group at American Express is entering into a new phase of technology transformation driven by opportunities to simplify processes, deepen business intelligence, analytics and reporting, and raise operational efficiency. If you have the talent and desire to deliver innovative products&nbsp;and services at a rapid pace, with hands on experience and strategic thinking, in areas of data management and analytics, cloud computing, and modern software engineering, join our leadership team to be part of our transformation journey.What we’re looking for:As a Senior Engineer, you will deliver technical solutions passionate about Finance’s cloud adoption strategy using innovative technologies and industry standard processes to implement cloud platform. You should have experience in crafting enterprise-scale technical product requirements and delivering public cloud services, with a strong preference for Google Cloud, partnering with multiple tech and product teams, exposure to finance-oriented business processes, and ability to bring operational efficiency on deliveries. Knowledge in technologies such as GCP, Big data, SQL, NoSQL etc. Be part of a fast-paced Agile team, design, develop, test, troubleshoot &amp; optimize solutions created to simplify access to the Amex's Big Data Platform.Minimum Qualifications:<ul><li>Over 12 years of experience in application development using Java and related technologies.</li><li>More than 5 years of experience in creating enterprise-scale technical product requirements and delivering public cloud services, with a strong preference for Google Cloud.</li><li>Proficient in application development across multiple programming languages (Java, .NET, Go, Python, etc.) and skilled in driving developer requirements for cloud product services.</li><li>Sufficient knowledge of Linux to assist with infrastructure maintenance.</li><li>Extensive practical experience in resolving performance bottlenecks.</li><li>Extensive hands-on experience in application migration and cloud infrastructure, particularly with Google Cloud Platform (GCP).</li><li>Expertise in designing, developing, and optimizing large-scale data pipelines for processing, transformation, and analysis using GCP technologies.</li><li>Strong Object-Oriented Programming skills with a solid understanding of design patterns.</li><li>Knowledgeable in integrating Continuous Integration and Continuous Delivery (CI/CD) tools with cloud services.</li><li>Experienced in distributed (multi-tiered) systems, relational database design, development, troubleshooting, and automated testing.</li><li>Comprehensive understanding of enterprise infrastructure technologies, including Compute, Storage, and Networking.</li><li>Skilled in analyzing complex data engineering challenges, proposing effective solutions, and implementing them efficiently.</li><li>Capable of leading reviews of individual or team contributions.</li><li>Focused on delivering prioritized or assigned features during ongoing sprints.</li><li>Effective communicator, collaborating with business and development teams to support changes and implementations.</li></ul>Preferred Qualifications:<ul><li>Certifications in cloud platform (GCP Professional Data Engineer) is a plus.</li><li>Expertise with GCP Big Query, Query Optimization strategies, and parsing.</li><li>RESTful API development experience.</li><li>Proven experience in SQL and familiarity with relational database technologies such as Yellowbrick, Oracle, MS SQL, SingleStore (MemSQL), DB2, PostgreSQL.</li><li>Lead as an active member of an agile team through consistent administration and development practices (tools, components, and documentation).</li><li>Strong analytical and problem-solving, coupled with a continuous improvement mindset.</li><li>Excellent communication skills, capable of explaining complex issues in simple terms to a diverse audience.</li><li>Lead team members in the completion of assigned tasks.</li><li>Knowledge of real time framework and processing.</li><li>Lead training sessions and create comprehensive documentation to empower end users to leverage the Business Intelligence capabilities effectively.</li><li>Ability to in simple scripting commands using programming languages such as Shell or Python.</li></ul>Salary Range: $110,000.00 to $190,000.00 annually + bonus + benefitsThe above represents the expected salary range for this job requisition. Ultimately, in determining your pay, we’ll consider your location, experience, and other job-related factors.We back you with benefits that support your holistic well-being so you can be and deliver your best. This means caring for you and your loved ones' physical, financial, and mental health, as well as providing the flexibility you need to thrive personally and professionally:<ul><li>Competitive base salaries&nbsp;</li><li>Bonus incentives&nbsp;</li><li>6% Company Match on retirement savings plan&nbsp;</li><li>Free financial coaching and financial well-being support&nbsp;</li><li>Comprehensive medical, dental, vision, life insurance, and disability benefits&nbsp;</li><li>Flexible working model with hybrid, onsite or virtual arrangements depending on role and business need&nbsp;</li><li>20+ weeks paid parental leave for all parents, regardless of gender, offered for pregnancy, adoption or surrogacy&nbsp;</li><li>Free access to global on-site wellness centers staffed with nurses and doctors (depending on location)&nbsp;</li><li>Free and confidential counseling support through our Healthy Minds program&nbsp;</li><li>Career development and training opportunities</li></ul>For a full list of Team Amex benefits, visit our Colleague Benefits Site.American Express is an equal opportunity employer and makes employment decisions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, disability status, age, or any other status protected by law. American Express will consider for employment all qualified applicants, including those with arrest or conviction records, in accordance with the requirements of applicable state and local laws, including, but not limited to, the California Fair Chance Act, the Los Angeles County Fair Chance Ordinance for Employers, and the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance. For positions covered by federal and/or state banking regulations, American Express will comply with such regulations as it relates to the consideration of applicants with criminal convictions.We back our colleagues with the support they need to thrive, professionally and personally. That's why we have Amex Flex, our enterprise working model that provides greater flexibility to colleagues while ensuring we preserve the important aspects of our unique in-person culture. Depending on role and business needs, colleagues will either work onsite, in a hybrid model (combination of in-office and virtual days) or fully virtually.US Job Seekers - Click to view the “Know Your Rights” poster. If the link does not work, you may access the poster by copying and pasting the following URL in a new browser window: <a href="https://www.eeoc.gov/poster" target="_blank">https://www.eeoc.gov/poster</a>Employment eligibility to work with American Express in the U.S. is required as the company will not pursue visa sponsorship for these positions.

American Express

Senior Cloud Engineer, Financial Data Engineering

The Fusion Search Engineer is part of a larger team responsible the development, maintenance, and support of enterprise systems that support a portfolio of mission critical applications for a federal agency.&nbsp; The Search engineer is responsible for the maintenance, support, and enhancement of the Lucidworks Fusion Search platform. Responsibilities include:<ul><li>Developing and maintaining search solutions and provide analysis and recommendations to improve performance</li><li>Implementing AI and machine learning algorithms to enhance searching using advanced algorithms to improve usability.</li><li>Participate in requirements design, code reviews, and internal feature demos with colleagues to validate design decisions and implementation choices.</li><li>Optimizing search performance continuously monitoring and improving search performance, including, indexing, query processing and result ranking.</li><li>Ensuring that the search interface is user-friendly and meets the needs of the end users.</li><li>Security and compliance through development and management of Security Assessment and Authorization (S&amp;A) package, ensuring all applicable security controls comply with NIST SP 800-53, NIST SP 800-37, and OMB A-130.</li><li>Document and deliver security artifacts, including the Security Assessment Plan (SAP), Security Assessment Report (SAR), and Plan of Action Milestones (POA&amp;M).</li></ul>Projected compensation range for this position is $140K - $170K. The final salary offered will generally fall within this range and is determined by various factors, including but not limited to the individual's particular combination of education, knowledge, skills, competencies, and experience, as well as internal pay equity, location, contract-specific affordability and other organizational requirements.Required Skills<ul><li>8+ years of IT experience</li><li>Proven hands-on experience implementing and supporting enterprise search technologies specifically Lucidworks Fusion Search Platform.&nbsp;</li><li>Skilled in Linux system administration and deployment, with experience in both on premises and cloud-based environments.&nbsp;</li><li>Hands-on experience with at least 2 implementations of Lucidworks Fusion Search.</li><li>Familiarity with NIST standards (SP 800-53, SP 800-37), OMB A-130, and security framesorks for IT systems.</li><li>Knowledge of enterprise-level system monitoring tools and metrics development.</li><li>Expertise in IT security and privacy controls, Security Assessment &amp; Authorization (SA&amp;A) processes, and risk management practices.</li><li>Must be a U.S. Citizen</li></ul> Desirable Skills <ul><li>Experience supporting the Lucidworks Fusion Search platform for a federal government agency</li><li>Active federal government public trust clearance</li></ul>

Procentrix

Fusion Engineer

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description This position is located at a Semiconductor Manufacturing Facility. Position Purpose: Work is performed in industrial settings including: assembly plants, metal fabrication plants, refineries, and power train plants. Collect, sort and transport disposables and recyclables including: trash, hazardous waste, scrap metal and other waste streams throughout a facility to designated container and location. Primary Duties/Responsibilities: <ul><li>Perform job duties in a safe manner compliant with policies, procedures and practices.</li><li>Maintain a safe, neat and clean work environment this includes: work area, equipment, locker rooms, break rooms, and office areas.</li><li>Model professional behavior at all times; report to work as scheduled, on time and prepared to work.</li><li>Collect trash, recyclables and hazardous waste from various locations throughout the facility.</li><li>Breakdown scrap parts for repair or recycling.</li><li>Transport waste/recyclables to disposal container and/or storage location.</li><li>Load semi-trailers and roll-off boxes for shipment to landfill or recycling center.</li><li>Maintain storage areas, and drum pads in accordance to regulations.</li><li>Document and inform the manager or designated person of any contamination in recycling containers.</li><li>Complete reports and documentation correctly and submit timely as directed.</li><li>Participate in meetings to access the work environment for safety and effectiveness.</li><li>Operate equipment safely and compliant with policies including: fork-trucks, tuggers, and transport carts.</li><li>Perform preventive maintenance (PM) and safety checks on mobile equipment before and after operating; report any defects appropriately and timely.</li><li>Demonstrate a commitment to learning and development; stay current of safe work practices, policies and regulations.</li><li>Work effectively in a team environment and provide support and assistance to others.</li><li>Commitment to promoting and creating a safety culture and positive work environment.</li><li>Perform other job duties as requested to support the business operations.</li></ul> Work Environment: Must be able to work in loud, cold, hot, wet, and dry environments. Qualifications Education/Experience/Background: <ul><li>High School diploma or GED.</li><li>Experience operating a forklift or similar equipment desired.</li></ul> Knowledge/Skills/Abilities: <ul><li>Able to read and understand instructions in English.</li></ul> Required Certification/Licenses/Training: <ul><li>Must have a valid driver's license.</li><li>Successfully complete drug screen and pre-employment physical, safety sensitive background check.</li></ul> Physical Requirements: <ul><li>Push/pull and frequently lift and carry up to 40 lbs.</li><li>Manual dexterity to manipulate small hand tools, pick up and sort small parts.</li><li>Lift, carry, push or pull equipment of various size, shape, and weight.</li><li>Able to sit periodically and for extended periods of time, climb ladders/stairs, reach below knees and above shoulders, kneel and crawl to access work areas.</li><li>Frequent standing, walking, bending, and stooping, able to reach forward and grasp equipment</li><li>Ability to balance and walk on wet and slick surfaces, metal grates, narrow platforms, and uneven surfaces.</li></ul> Additional Information Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Environmental Technician

ResponsibilitiesJob Summary:We are looking for a skilled engineer with a strong electrical background and mechanical aptitude to lead the maintenance, design, and installation of production equipment, infrastructure, buildings, and grounds. This role requires close collaboration with multidisciplinary teams throughout project development and reviews to enhance efficiency and ensure compliance with industry standards. Candidates should be adaptable, as flexibility in work hours may be necessary to meet project deadlines.Job Responsibilities (May include, but are not limited to, the following):Core Responsibilities:<ul><li>Project Management<ul><li>Assist in the development of automation solutions and control systems to enhance production efficiency.</li><li>Generate scope of work documents, cost estimates, equipment change documentation, administer various engineering projects and programs related to traditional facilities infrastructure and production equipment.</li><li>Coordinate with suppliers and contractors on procurement of facilities and production equipment support; tests newly installed machines to ensure fulfillment of contract specifications.</li><li>Oversee contracted services as needed for equipment installs, modifications &amp; repairs.&nbsp; Monitor their activities to ensure safe work practices.</li><li>Provide testing, commissioning, and validation of new or modified equipment.</li><li>Ensure compliance with safety and regulatory standards, conducting audits and risk assessments as needed.</li></ul></li></ul>Additional Responsibilities:<ul><li>Provides engineered solutions, recommendations and procurement of electrical hardware for production equipment.Support the electrical testing, commissioning, and validation of new or modified hardware installations.</li><li>Generate and maintain technical documentation, including electrical schematics, spare parts lists, hardware manuals, troubleshooting &amp; repair procedures.</li><li>Collaborate with maintenance, mechanical engineers, process engineers, safety engineers, and other internal and external contacts in the coordination of system repairs / installs.</li><li>Provide field engineering and troubleshooting assistance to support maintenance, EHS and operation groups.</li><li>Perform engineering calculations, collect data and gather information to support equipment improvement initiatives for OEE improvements.</li><li>Performs other work-related duties as assigned by the Facility Engineering Manager.</li></ul>QualificationsBasic Qualifications:<ul><li>Bachelor’s degree in engineering, electrical engineering technology, or a related field.</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>Preferred Qualifications:<ul><li>5+ years of experience in electrical project management, equipment design, or industrial automation.</li><li>Strong understanding of electrical systems, controls, and automation in a manufacturing environment.</li><li>Ability to interpret and create electrical schematic drawings.</li><li>Ability to interpret codes, and industry regulations.</li><li>Proficiency with Autodesk AutoCAD and Office 365.</li><li>Excellent communication skills with experience in cross-functional collaboration.</li><li>Proven ability to oversee multiple projects while maintaining timelines and budgets.</li><li>Hands on experience with PLC programming, control system design, and troubleshooting electrical components.</li><li>Hands on experience with industrial power distribution systems, including 12,500V high-voltage supply and secondary 480V three-phase distribution within a manufacturing environment.</li></ul>About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Howmet Aerospace

Facility Project Engineer

ResponsibilitiesUnder the direction of the VP of Continuous Improvement, this position is responsible for supporting and assisting the Continuous Improvement Organization (Business Unit and Manufacturing Plants) as “boots on the ground” in the organization, planning, implementation, and follow-through of manufacturing improvement initiatives.&nbsp; Correspondingly, the incumbent coordinates and leads a wide range of activities that are designed to improve on-time delivery, productivity, quality, cost, safety, and environmental performance. This position does not directly supervise other personnel. Additionally, this position supports Operations Supervisors, Area Leads, and Plant Managers.This position is located 20 minutes from beautiful Lake Michigan in La Porte, Indiana. Popular neighboring cities include New Buffalo, Michigan City, Valparaiso, South Bend, and Chicago, Illinois is just over a one-hour drive!Key Objectives<ul> <li>Work out of the La Porte, IN site as part of a team to reduce executional scrap</li> <li>Complete time studies in various processes and identify opportunities for improvement.</li> <li>Perform shopfloor observations, working with Manufacturing employees to document current and target conditions.&nbsp; Eliminate non-value added activities while working on scrap reduction activities.</li> <li>Participate in the Howmet Business System implementation of continuous improvement initiatives and drive waste reductions utilizing Lean principles (JIT, Autonomation, Value Stream Mapping, Kaizen, 5S, Standard Work, Line/Cell Design, Single Piece Flow, Material Flow, Visual Management, SMED, TPM, Root Cause Problem Solving, etc.)</li> <li>Coordinate with resource departments within the assigned locations to fabricate, install, and implement improvements to drive waste down and increase efficiency and output.</li> <li>Collaborate in Kaizen activities, problem solving, and rapid improvement process events with both internal and external consultants, customers, and suppliers. This includes providing support to sustain all follow-throughs required to sustain the improvements initiated during those events, especially those concentrated on local improvement. &nbsp;</li> <li>Performing other duties as assigned.</li></ul>Job Dimensions:The incumbent will possess:<ul> <li>Willingness to work with shopfloor employees, interview, and document current condition</li> <li>Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation.</li> <li>Strong analytical and problem-solving skills: able to develop and use structured approaches to identify root causes and recommend resolutions</li> <li>Ability to manage multiple projects simultaneously to meet objectives and key deadlines</li></ul>QualificationsBasic Qualifications:<ul> <li>Bachelor’s degree in Engineering from an accredited university</li> <li>Strong working knowledge of Microsoft Office Suite, including Word, Excel and PowerPoint</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>Preferred Qualifications:<ul> <li>Previous work experience in a manufacturing environment is highly desired</li> <li>Exceptional Excel Spreadsheet creation, macros, and related data analysis skills</li> <li>Excellent interpersonal and communication skills&nbsp;</li> <li>Willing to spend time on the manufacturing shopfloor to learn and interact with employees</li> <li>Teamwork and go-getting attitude</li> <li>Good analytical/statistical problem-solving skills</li></ul>The incumbent shall take such steps as necessary to assure that all employment practices under his/her control, including hiring, firing, promotions, and discipline, are conducted in a nondiscriminatory fashion and without regard to race, sex, religion, national origin, age or physical disability.&nbsp; Incumbent recognizes that accident prevention is equal to quality, production, delivery, and cost control and accepts the responsibility to work safety while promoting safety conscious among fellow employees.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Manufacturing Engineer - Entry Level, Continuous Improvement

ResponsibilitiesUnder the direction of the VP of Continuous Improvement, this position is responsible for supporting and assisting the Continuous Improvement Organization (Business Unit and Manufacturing Plants) as “boots on the ground” in the organization, planning, implementation, and follow-through of manufacturing improvement initiatives.&nbsp; Correspondingly, the incumbent coordinates and leads a wide range of activities that are designed to improve on-time delivery, productivity, quality, cost, safety, and environmental performance. This position does not directly supervise other personnel. This position does support&nbsp;Operations Supervisors, Area Leads, and Plant Managers.This position is located 20 minutes from beautiful Lake Michigan in La Porte, Indiana. Popular neighboring cities include New Buffalo, Michigan City, Valparaiso, South Bend, and Chicago, Illinois is just over a one-hour drive!Key Objectives:<ul> <li>Participate in the Howmet Business System implementation of continuous improvement initiatives and drive waste reductions utilizing Lean principles (JIT, Autonomation, Value Stream Mapping, Kaizen, 5S, Standard Work, Line/Cell Design, Single Piece Flow, Material Flow, Visual Management, SMED, TPM, Root Cause Problem Solving, etc.)</li> <li>Coordinate with resource departments within the assigned locations to fabricate, install, and implement improvements to drive waste down and increase efficiency and output.</li> <li>Develop Value Stream maps of key processes and product flows. Define the current condition of the facility(ies) to identify opportunities and create a target condition, with action plans to improve operational and financial results.</li> <li>Complete value stream mapping, identify opportunities, and lead shopfloor manufacturing efforts in process reengineering and process improvements in various plants.&nbsp;</li> <li>Facilitate successful kaizen, problem solving, and rapid improvement process events with both internal and external consultants, customers, and suppliers. This includes providing support to sustain all follow-throughs required to sustain the improvements initiated during those events, especially those concentrated on local improvement. &nbsp;</li> <li>Performing other duties as assigned.</li></ul>Job Dimensions:The incumbent will possess:<ul> <li>Demonstrated experience in manufacturing improvement techniques, including flow principles, Kanban, and plan for every part (PFEP)</li> <li>Expertise in value stream mapping and associated improvement methodologies</li> <li>Understanding of pillars of Toyota production system (JIT, Autonomation)</li> <li>Experience evaluating TAKT time vs. cycle time, determining work area constraints (i.e. cycle time constraint, periodic work constraints, downtime constraints).</li> <li>Experience on shop floor, working with employees, and enhancing manufacturing processes</li> <li>Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation.</li> <li>Strong analytical and problem-solving skills: able to develop and use structured approaches to identify root causes and recommend resolutions</li> <li>Demonstrated experience in project leadership and project management skills, with ability to manage multiple projects simultaneously to meet objectives and key deadlines</li></ul>QualificationsBasic Qualifications:<ul> <li>Minimum of two (2) years&nbsp;of experience in manufacturing environments in areas such as: Operations, Engineering, Supply Chain, Quality, or Operational Excellence</li> <li>Bachelor’s degree in Engineering from an accredited institution&nbsp;</li> <li>Knowledge and understanding of Continuous Process Improvement methodologies such as Lean and Six Sigma</li> <li>Strong working knowledge of Microsoft Office Suite, including Word, Excel and PowerPoint</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>Preferred Qualifications:<ul> <li>Exceptional Excel Spreadsheet creation, macros, and related data analysis skills</li> <li>Three or more years of related experience highly desired</li> <li>Strong excellent interpersonal and communication skills&nbsp;</li> <li>Willingness to spend time on the manufacturing shop floor to learn and interact with employees</li> <li>Ability to manage multiple projects simultaneously and drive change</li> <li>Exhibit teamwork and go-getting attitude</li> <li>Good analytical/statistical problem-solving skills</li></ul>The incumbent shall take such steps as necessary to assure that all employment practices under his/her control, including hiring, firing, promotions, and discipline, are conducted in a nondiscriminatory fashion and without regard to race, sex, religion, national origin, age or physical disability.&nbsp; Incumbent recognizes that accident prevention is equal to quality, production, delivery, and cost control and accepts the responsibility to work safety while promoting safety conscious among fellow employees.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Manufacturing Engineer - Continuous Improvement

ResponsibilitiesHowmet Aerospace has an immediate opening for an Environmental, Health and Safety (EHS) Engineer at our Dover, NJ location. Our passionate commitment to EHS provides the successful candidate with an excellent environment in which to work and the leadership commitment and support to deliver results.&nbsp; This position is a key member of the location’s EHS team and is highly visible position in the plant and Business Unit. The position provides an excellent platform for potential future growth to the successful candidate.Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation.Anticipated Pay Range: $80k-$100k &nbsp;per year.&nbsp; *Pay rates within this range are determined based on various factors including experience, education, certifications, etc.Key Responsibilities of this position include:<ul><li>Assist with location fatality prevention efforts including helping to lead deployment and execution of key fatality prevention elements and coaching location leaders.</li><li>Analyze injury and incident data and assist line management in the implementation of focused injury reduction efforts. Provide expertise to proactively address injury reduction efforts.</li><li>Assist with the facility’s industrial hygiene program including execution of IH sampling plans, the administration of IH databases and employee exposure records, hazardous material management, ergonomics oversight and serve as the radiation protection technical resource.</li><li>Assist with environmental compliance.</li><li>Provide technical expertise and participate in injury/incident investigations to assist in identifying root cause analysis and provide recommendations to prevent recurrence.</li><li>Coach and counsel departmental leaders in the execution of their EHS accountabilities.</li><li>Partner with location leadership to deliver EHS objectives.</li><li>Lead and assist with other EHS accountabilities.</li></ul>Basic Qualifications:&nbsp;<ul><li>Bachelor’s Degree from an accredited institution.</li><li>At least 1&nbsp;year of environmental, health or safety experience in a manufacturing environment.</li></ul>Preferred Qualifications<ul><li>Bachelor’s Degree in environmental, safety or health discipline from an accredited institution.</li><li>3 years of environmental, health or safety experience in a manufacturing environment.</li></ul>Essential Skills:<ul><li>Demonstrated professional with passion for change and relentless focus on execution.</li><li>Knowledge of applicable Federal and State EHS related regulations and procedures.</li><li>Strong communication skills, analytical skills, problem solving and human relations skills.</li><li>Ability to make difficult decisions with sometimes an incomplete set of data.</li><li>Critical skills include: Execution, attention to detail, initiative, conflict resolution, customer focus, collaboration, building ownership and commitment, establishing a direction, drive for change, gaining organization support and tenacity.</li></ul>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status.&nbsp; ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'). Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.DisclaimerThe above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed..QualificationsHowmet Aerospace has an immediate opening for an Environmental, Health and Safety (EHS) Engineer at our Dover, NJ location. Our passionate commitment to EHS provides the successful candidate with an excellent environment in which to work and the leadership commitment and support to deliver results.&nbsp; This position is a key member of the location’s EHS team and is highly visible position in the plant and Business Unit. The position provides an excellent platform for potential future growth to the successful candidate.Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation.Anticipated Pay Range: $80k-$100k &nbsp;per year.&nbsp; *Pay rates within this range are determined based on various factors including experience, education, certifications, etc.Key Responsibilities of this position include:<ul><li>Assist with location fatality prevention efforts including helping to lead deployment and execution of key fatality prevention elements and coaching location leaders.</li><li>Analyze injury and incident data and assist line management in the implementation of focused injury reduction efforts. Provide expertise to proactively address injury reduction efforts.</li><li>Assist with the facility’s industrial hygiene program including execution of IH sampling plans, the administration of IH databases and employee exposure records, hazardous material management, ergonomics oversight and serve as the radiation protection technical resource.</li><li>Assist with environmental compliance.</li><li>Provide technical expertise and participate in injury/incident investigations to assist in identifying root cause analysis and provide recommendations to prevent recurrence.</li><li>Coach and counsel departmental leaders in the execution of their EHS accountabilities.</li><li>Partner with location leadership to deliver EHS objectives.</li><li>Lead and assist with other EHS accountabilities.</li></ul>Basic Qualifications:&nbsp;<ul><li>Bachelor’s Degree from an accredited institution.</li><li>At least 1&nbsp;year of environmental, health or safety experience in a manufacturing environment.</li></ul>Preferred Qualifications<ul><li>Bachelor’s Degree in environmental, safety or health discipline from an accredited institution.</li><li>3 years of environmental, health or safety experience in a manufacturing environment.</li></ul>Essential Skills:<ul><li>Demonstrated professional with passion for change and relentless focus on execution.</li><li>Knowledge of applicable Federal and State EHS related regulations and procedures.</li><li>Strong communication skills, analytical skills, problem solving and human relations skills.</li><li>Ability to make difficult decisions with sometimes an incomplete set of data.</li><li>Critical skills include: Execution, attention to detail, initiative, conflict resolution, customer focus, collaboration, building ownership and commitment, establishing a direction, drive for change, gaining organization support and tenacity.</li></ul>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status.&nbsp; ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'). Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.DisclaimerThe above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

EHS Engineer

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!SPACE SYSTEMS&nbsp;You already know Rocket Lab as a global launch leader with our Electron rocket — one of the most frequently flown in the world. Next up? Neutron — our reusable rocket built for the mega constellations of the future. But we’re not just launching rockets. Rocket Lab Space Systems is building the future of space.From sending&nbsp;CAPSTONE to the Moon with NASA to enabling microgravity manufacturing through successful orbital re-entry — and next, heading to Mars with UC Berkeley and NASA — we design and build spacecraft that do what others can’t. Whether it’s a single high-performance satellite or a full constellation, we do it all — faster and smarter — thanks to our vertically integrated satellite components.If you're ready to work with a world-class team that takes on the boldest space missions and makes the impossible possible — we’re just getting started.&nbsp;PRINCIPAL MECHANISMS ENGINEER – SPACE SYSTEMS&nbsp;At Rocket Lab, we’re redefining what’s possible in space — from reliable Electron launches and deep space missions with NASA to our upcoming Neutron rocket designed to power mega-constellations.&nbsp;To support this momentum, we’re expanding our Space Systems team and looking for a Principal Mechanism Engineer to lead the design, development, and qualification of world-class ADCS actuators at scale.WHAT YOU’LL GET TO DO:&nbsp;<ul><li>Own the full life cycle of reaction wheel development, from requirements to on-orbit commissioning.</li><li>Provide expert technical support to internal mission teams and global customers.</li><li>Lead failure investigations, non-conformance reviews, and continuous improvement across production.</li><li>Design, verify, and validate systems through environmental testing (TVAC, vibration, shock, EMC).</li><li>Develop and implement advanced testing methodologies.</li><li>Mentor junior engineers and drive technical knowledge transfer across teams.</li></ul>YOU’LL BRING THESE QUALIFICATIONS: <ul><li>Master's degree in Aerospace Engineering (or a related field), with over 8 years of proven experience in developing brushless electric motors, reaction wheels, momentum wheels, or control moment gyroscopes (CMGs).</li><li>Proven leadership in risk management and material review boards, collaborating directly with customers to resolve issues.</li><li>Proven ability to lead products from requirements definition through to on-orbit commissioning.</li><li>Passionate about mentoring junior engineers and developing technical training materials.</li><li>Experienced with aerospace and spaceflight standards including NASA-STD-5017, ECSS-E-ST-3301C, SMC-S-016, and AS9100 quality systems.</li></ul>Technical Knowledge:<ul><li>Bearing preload techniques and verification</li><li>Electrically commutated motors and drive topologies</li><li>Rotor dynamics and imbalance characterization</li><li>Micro-vibration analysis and mitigation</li><li>Vacuum tribology, including lubricants for prolonged space operation</li><li>Bearing material selection and load capacity analysis</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>Hands-on experience with on-orbit anomaly investigations and failure/root cause analysis.</li><li>Strong background in space-grade electronics, including magnetics design and brushless motor drive circuits.</li><li>Knowledge of control systems, estimators, and various speed/position encoders used in spacecraft mechanisms.</li><li>Skilled in requirements management and preparing compliance matrices to ensure mission alignment.</li><li>Experienced in planning, executing, and reporting development, acceptance, and qualification testing.</li><li>Proficient in Python for statistical analysis of large production datasets.</li></ul>Ready to push boundaries and build the future of space?Apply now and make your mark at Rocket Lab!WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

669 Engineering Jobs