field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Position Purpose: Responsible for the operation, routine servicing and care of a wide variety of specialized equipment and apparatus in a plant/treatment facility including pumps, motors, chemical preparation and feeding; physical, chemical treatment and/or water treatment processes; control equipment and monitoring equipment. Maintains records of operations, completes and submits routine and special reports as assigned. Inspects all mechanical equipment for proper operation, performs technical duties and skilled work in preventive/corrective maintenance and repairs. Provides safe and efficient execution of work as scheduled, providing problem analysis for equipment history, and appropriate action in response to emergencies. Performs related field and laboratory tests, which are necessary to monitor and control the facilities, and makes necessary adjustments to equipment, processes and chemical feeders, as test results may indicate and as instructed by the Supervisor. Operates and assists in repairs to water systems and plants. Trains other employees in the operation and maintenance of the facilities including maintenance, repairs, laboratory work and safety as required. Duties will also include system distribution activities to include, however not limited to: mark outs, meter reading, customer service field activities, and distribution system maintenance and repairs. Must be able to work night, weekends, holidays and overtime as required. Must maintain ability to work flexible schedules as to provide shift coverage for short- and long-term shift vacancies within the operation. Shift and schedule are subject to change at management's discretion as to maintain operational efficiencies. Primary Duties/Responsibilities: <ul><li>Operates, maintains, repairs and inspects water treatment systems to provide compliance with all applicable state and federal regulations maintaining optimum plant operations.</li><li>Monitors all charts, gauges and other operating equipment via manual and electronic means such as a SCADA system.</li><li>Ensures water quality meets minimum regulatory requirements.</li><li>Calculates chemical feed rates required, calibrates chemical feed equipment and adjusts chemical feed rate to maintain consistent water quality.</li><li>Maintains good housekeeping procedures at the plant.</li><li>Performs routine housekeeping chores and special housekeeping as required.</li><li>Conducts safety inspections and follows all safety rules and procedures.</li><li>Ensures that pumping combinations are accomplished in the most economical manner or as directed by supervisor.</li><li>Responsible for start-up, shutdown, operation and periodic checks of water treatment processes, components and equipment.</li><li>Adjustments of plant equipment such as pumping systems, chemical feeders, auxiliary equipment and control system storage tanks levels and pump stations indicators. Performs operations in accordance with established SOPs and job safety standards.</li><li>Develops, assists, and revises operations and maintenance related procedures.</li><li>Performs routine preventative/corrective maintenance.</li><li>Load and unloads chemicals used at the treatment plants.</li><li>Maintains accuracy of shift operating logs, records, time sheets, work orders and other administrative documents.</li><li>Responds to abnormalities and takes appropriate corrective action consistent with established operating procedures and good engineering practices.</li><li>Performs other duties necessary to fulfill facility operation.</li><li>Assists in the development, utilization and effectiveness of the preventative maintenance system.</li><li>Completes accurate reporting of all work execution activities.</li><li>Assists in ordering, delivery and inventory of materials and supplies; provides assistance, guidance and training to other operations personnel.</li><li>Documents results through completed work orders based on schedule and priority or as required.</li><li>Availability for first response calls and problem solving, during and after hours.</li><li>Must maintain ability to work flexible schedules as to provide shift coverage for all short- and long-term shift vacancies in the operation.</li><li>Shift and schedule subject to change at management's discretion as to maintain operational efficiencies.</li><li>Performs other job-related tasks as required or requested.</li></ul> Qualifications Education/Experience/Background: <ul><li>High School Diploma/GED is required.</li></ul> Knowledge/Skills/Abilities: <ul><li>Upon completion of training, must have a strong technical knowledge of, and hands-on experience working in the operation of advanced water treatment plant facilities on an assigned shift.</li><li>Must be flexible and enjoy a diversity of responsibilities.</li><li>Thorough knowledge of the operating characteristics and maintenance requirements of water treatment plants. </li><li>Knowledge of electrical and electronic systems. </li><li>Knowledge of hydraulic, chemical and mechanical principles pertinent to water treatment plant operations.</li><li>Thorough knowledge of occupational hazards of the work and the necessary safety precautions. </li><li>Ability to operate a computer and other electronic devices relative to the operation of the plants, troubleshooting malfunctions and recording data.</li><li>Ability to detect flaws in the operation of mechanical equipment and to determine proper remedial measures.</li><li>Ability to conduct water quality testing, validations and all other necessary water quality instrumentation use/maintenance.</li><li>Ability to understand and follow complex oral and written instructions.</li><li>Ability to work in adverse conditions.</li><li>Skill in the proper operation and care of a variety of specialized water equipment/materials/tools.</li><li>Strong knowledge of mechanical, hydraulic, chemical principles.</li><li>Knowledge of applicable health and safety regulations, practices, procedures and water quality monitoring practices.</li><li>Ability to interpret mechanical drawings, layouts, wiring diagrams, logic drawings, P&amp;ID's, technical manuals and specifications.</li><li>Capable of completing written operating procedures, work requests and other documentation completion.</li><li>Ability to prioritize and handle multiple tasks efficiently.</li><li>Ability to diagnose abnormalities in complex controls, interlocked control schemes and other operating systems.</li><li>Experience performing maintenance and operational tasks of substantial variety and complexity without close technical supervision.</li><li>Must demonstrate and apply thorough knowledge of mechanical and/or electrical principles and practices and/or instrumentation and controls logics and diagnostics including troubleshooting skills.</li><li>Experience interfacing with SCADA, Computer Maintenance Management Systems and GIS systems.</li><li>Strong communications (written/verbal).</li><li>Ability to prepare/communicate orally and in writing and interact effectively and diplomatically with management and/or bargaining unit employees as well as regulators, consultants, municipal officials, health officers, customers, contractors, and the general public.</li><li>Computer and software usage as required by the position.</li><li>Ability to work with peers as a team player.</li><li>Ability to work alone and without direct supervision.</li></ul> Required Certification/Licenses/Training: <ul><li>Must obtain/maintain New Jersey Department of Environmental Protection licenses T-1 and W-1 within 3 years.</li><li>Possession of valid New Jersey driver's license.</li></ul> Physical Requirements: <ul><li>Ability to perform work which requires strenuous physical exertion for such activities as climbing, lifting objects weighing over 50 pounds, crouching or crawling in restricted areas.</li><li>Ability to sit, stand and walk for long periods of time.</li><li>Must be physically able to complete necessary tasks wearing an approved respirator as required, as some required work may have potential for exposure to harmful environments, noise, etc.</li></ul> Additional Information Pay Range: $23.07 to $25.10 per hour. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave - 56 hours; Observed Holidays - 11 days; Vacation - 15 days Eligible for up to 3% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

O&M Technician

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!ABOUT THE TEAMJoin our dynamic team responsible for the mechanical and structural delivery of the Neutron Launch Vehicle Stage 2, Stage 1 Tank Module, and Payload Module at Rocket Lab! We are at the forefront of innovation, ensuring the integrity and performance of our primary structures through rigorous testing and advanced instrumentation.&nbsp;WHAT YOU'LL GET TO DO:&nbsp;As a Design and Test Engineering Intern, you will play a crucial role in our Neutron composite structures test campaigns. Your primary responsibility will be to deliver the instrumentation systems used to monitor the health and failure points of our primary structures during structural test campaigns, as well as support the design of those structures.&nbsp;Specifically, you will:&nbsp;<ul><li>1. Instrumentation System Design: Fully design all instrumentation systems for tank structural testing.&nbsp;</li></ul><ul><li>2. System Delivery: Deliver a ready-to-use instrumentation system for structural testing.&nbsp;</li></ul><ul><li>3.&nbsp;Structural Design Engineering: Assist with design of our primary structures and supporting hardware for testing said structures.&nbsp;</li></ul>PREFERRED QUALIFICATIONS &amp; EXPERIENCE:<ul><li>Current student in pursuing a degree in Mechanical Engineering or Mechatronics Engineering.&nbsp;</li></ul><ul><li>Basic understanding of structural design and mechanics of materials.&nbsp;</li></ul><ul><li>Basic understanding of engineering instrumentation.&nbsp;</li></ul><ul><li>Basic CAD experience.&nbsp;</li></ul><ul><li>Strong analytical and problem-solving skills.&nbsp;</li></ul><ul><li>Excellent communication and teamwork abilities.&nbsp;</li></ul><ul><li>Attention to detail and a proactive approach to learning and development.&nbsp;</li></ul>WHY JOIN US?<ul><li>Hands-On Experience: Gain practical experience in designing and delivering instrumentation systems for high-stakes structural testing.&nbsp;</li></ul><ul><li>Professional Growth: Develop your skills and knowledge in a supportive and innovative environment.&nbsp;</li></ul><ul><li>Broad Exposure: Work on a variety of projects and interact with different aspects of rocket design and operations.&nbsp;</li></ul><ul><li>Impactful Work: Contribute to projects that play a crucial role in ensuring the success and safety of our launch vehicles.&nbsp;</li></ul>If&nbsp;you're a motivated student with a passion for structural design, mechanics of materials, and engineering instrumentation, apply now to join Rocket Lab as a Design and Test Engineering Intern and help us push the boundaries of space exploration!&nbsp;REQUIREMENT:&nbsp;Must be available to work full-time, on-site for a minimum of 12 consecutive weeks beginning November 2025.When applying, include a detailed cover letter stating what interests you about Rocket Lab and this role in particular. Feel free to be creative and stand out in your application and introduction to the team at Rocket Lab. Be sure to include relevant experience/personal or school projects you have completed that align with this role and why you believe you would be the best candidate for this role.&nbsp;WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Rocket Lab

Design & Test Engineering Intern - Neutron Tanks

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!ABOUT THE TEAM:&nbsp;Rocket Lab is a global leader in space exploration, and our Neutron rocket is at the cutting edge of aerospace technology. The Neutron Upper Module is the most diverse part of Neutron, incorporating fluidic components, avionics, carbon structures, mechanical actuators, and aerodynamic surfaces. As an intern, you will have the unique opportunity to work across all these systems, enhancing their performance and contributing to the future of space travel.YOUR MISSION:&nbsp;As a Development Engineering Intern at Rocket Lab’s Auckland site, you will have the unique opportunity to work closely with experienced test engineers on the Neutron upper module. This role will immerse you in the exciting world of rocket development, where you will be involved in setting up, designing, calibrating, planning, and troubleshooting test campaigns. These campaigns include, but are not limited to:<ul><li>Full scale stage separation</li><li>Canard actuation</li><li>Fairing actuation</li><li>Structural testing of the fairing</li></ul>Joining the Neutron team means you will play a crucial role in launching a new large rocket for the very first time!Key Responsibilities:<ul><li>Test Campaign Setup:&nbsp;Assist in the setup and design of test campaigns for the Neutron upper module.</li><li>Calibration and Planning:&nbsp;Work on calibrating equipment and planning detailed test procedures.</li><li>Troubleshooting:&nbsp;Collaborate with experienced engineers to troubleshoot and resolve issues during test campaigns.</li><li>Hands-On Experience:&nbsp;Gain practical, hands-on experience in a dynamic and fast-paced environment.</li></ul>Preferred Qualifications:&nbsp;<ul><li>Current student in good academic standing in one of the following fields: Aerospace / Aeronautical / Astronautical Engineering, Manufacturing Engineering, Mechanical Engineering, Mechatronics Engineering&nbsp;</li><li>Demonstrated passion for rocketry and aerospace</li><li>Excellent communication and problem-solving ability</li></ul>REQUIREMENT:&nbsp;Available to work full-time, on-site for a minimum of 12 consecutive weeks beginning November 2025.WHY JOIN US:&nbsp;<ul><li>Innovative Environment: Work on some of the most exciting space programs in the industry.&nbsp;</li><li>Professional Growth: Gain hands-on experience and mentorship from leading experts in the field.&nbsp;</li><li>Cutting-Edge Technology: Be part of a team that pushes the boundaries of space exploration.&nbsp;</li><li>Collaborative Team: Join a close-knit team that leverages collective efforts to solve problems and improve processes.&nbsp;</li></ul>Ready to Launch Your Career? If you're passionate about aerospace engineering, eager to learn, and ready to contribute to the future of space exploration, we want to hear from you! Apply now to join Rocket Lab and take the first step towards an extraordinary career in aerospace engineering.&nbsp;When applying, include a detailed cover letter stating what interests you about Rocket Lab and this role in particular. Feel free to be creative and stand out in your application and introduction to the team at Rocket Lab. Be sure to include relevant experience /personal or school projects you have completed that align with this role and why you believe you would be the best candidate for this role.&nbsp;WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Development Engineering Intern - Neutron Upper Module

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!ABOUT THE TEAM: &nbsp;Join our innovative Ground Systems Engineering (GSE) Electrical Team at Rocket Lab! Our team is dedicated to designing, building, testing, and commissioning launch pad systems and their associated infrastructure. We specialize in power system supply and distribution, instrumentation and control systems design, and launch vehicle communications. Our mission is to ensure the seamless operation of our launch facilities, supporting Rocket Lab's ambitious space missions.&nbsp;ABOUT THE ROLE:As an Electrical Engineering Intern on our GSE team, you will play a crucial role in the development and maintenance of our launch pad systems. You will gain hands-on experience in various stages of project development, from conceptualization and detailed design to construction and operation. Under the guidance of senior engineers, your responsibilities will include:&nbsp;<ul><li>Assisting in the development of electrical designs and schematics.&nbsp;</li><li>Supporting the testing and troubleshooting of electrical systems and components.&nbsp;</li><li>Helping maintain documentation, including drawings, reports, and project records.&nbsp;</li><li>Gaining exposure to project management tasks, such as scheduling, budgeting, and reporting.&nbsp;</li></ul>ABOUT THE PROJECT:&nbsp;The Ion Propulsion Development Chamber has been designed and constructed, involving extensive electrical work. The current focus is on creating two production chambers. As an intern, you will collaborate with a senior team member to develop these production chambers for the space systems teams, contributing to the advancement of our ion propulsion technology.&nbsp;PREFERRED QUALIFICATIONS &amp; EXPERIENCE:<ul><li>Current student in Electrical Engineering or Mechatronics Engineering.&nbsp;</li><li>Passion for space technology and a desire to contribute to groundbreaking projects.&nbsp;</li><li>Strong analytical skills and attention to detail.&nbsp;</li><li>Excellent communication skills and the ability to work well within a team environment.&nbsp;</li><li>Proficiency with CAD software and electrical design tools is a plus.&nbsp;</li></ul>REQUIREMENT:&nbsp;Available to work full-time, on-site for a minimum of 12 consecutive weeks beginning November 2025.Ready to Launch Your Career? Apply now and become a vital part of Rocket Lab's Ground Systems Engineering Team. Your journey to the stars starts here!&nbsp;When applying, include a detailed cover letter stating what interests you about Rocket Lab and this role in particular. Feel free to be creative and stand out in your application and introduction to the team at Rocket Lab.&nbsp;Be sure to include relevant experience /personal or school projects you have completed that align with this role and why you believe you would be the best candidate for this role.&nbsp;WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Electrical Ground Systems Engineering Intern

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!ABOUT THE TEAM:Our dynamic team is at the forefront of designing and building Neutron's Thrust Module. As the foundational module of Neutron, we house all the engines and integrate a vast array of fluid and avionics systems. Our responsibilities extend to the landing legs, aeroshell, and strakes. Our team boasts a diverse skill set, including the design and manufacture of both metallic and composite structures, as well as pressurized fluid systems.&nbsp;ABOUT THE PROJECT:Thrust Structure Build and Development Support: Assist the engineering team with the development of large metallic and composite structures.&nbsp;Landing Gear Build and Development Support: Support the engineering team in the development of composite landing legs.&nbsp;Auxiliary Tanks Build and Development Support: Aid the engineering team in the development of metallic and composite tanks.&nbsp;WHAT YOU'LL GET TO DO:&nbsp;<ul><li>Gain hands-on experience in designing rocket components.&nbsp;</li><li>Participate in the assembly of rocket structures.&nbsp;</li><li>Engage in testing procedures to ensure the integrity and functionality of rocket components.&nbsp;</li></ul>PREFERRED QUALIFICATIONS &amp; EXPERIENCE:<ul><li>Current student in Aerospace / Aeronautical / Astronautical Engineering, Mechanical Engineering, or Mechatronics Engineering.&nbsp;</li><li>Proficiency with CAD software such as NX (preferred), Fibersim (preferred), Solidworks, or CATIA.&nbsp;</li><li>Skills and knowledge in: Composite &amp; Metallic Manufacturing, Fluid Systems</li><li>Ability to work under pressure and meet tight deadlines.&nbsp;</li><li>Excellent communication skills and a collaborative team spirit.&nbsp;</li><li>Strong analytical skills with the ability to see the big picture and make informed decisions.&nbsp;</li><li>Tenacity, a can-do attitude, and the ability to think quickly and make accurate judgments.&nbsp;</li></ul>REQUIREMENT:&nbsp;Available to work full-time, on-site for a minimum of 12 consecutive weeks beginning November 2025.Why Join Us? This is a unique opportunity to immerse yourself in the cutting-edge field of rocket engineering. You'll work alongside experienced professionals, gain invaluable hands-on experience, and contribute to groundbreaking projects that push the boundaries of aerospace technology.&nbsp;Ready to Launch Your Career? Apply now and become a vital part of the Neutron Thrust Module Team. Your journey to the stars starts here!&nbsp;When applying, include a detailed cover letter stating what interests you about Rocket Lab and this role in particular. Feel free to be creative and stand out in your application and introduction to the team at Rocket Lab. Be sure to include relevant experience /personal or school projects you have completed that align with this role and why you believe you would be the best candidate for this role.&nbsp;WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Development Engineering Intern - Neutron Thrust Module

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!ABOUT THE TEAM:&nbsp;Are you passionate about software and data, and eager to contribute to groundbreaking aerospace projects? Our Data Engineering team is at the heart of data access, processing, and visualisation for the engineering and operational data that drives our company forward. We collaborate closely with every department, from R&amp;D on the new Neutron rocket to manufacturing for Space Systems and Electron. Our team provides essential tools and platforms that support various critical functions:<ul><li>Automated Engineering Pipelines: Generating automated reports and insights on the factory floor, during launch operations and flight data reviews, empowering manufacturing and operations engineers to make the right decision.</li><li>Data Visualization: Develop and maintain the tools used by the whole company to access and visualize data from their tests and operations, ranging from space missions to Neutron rocket engine development.</li></ul>YOUR MISSION:As an intern, you will play a crucial role in participating in software development, building a data platform, and automating data processes across the company. Your key responsibilities will include:<ul><li>Software Development: Contribute to the development and enhancement of the team's tools and platforms.</li><li>Build Robust Production Data Pipelines: Set up reliable automations for production data processing in collaboration with other departments, ensuring data integrity and availability.</li></ul>PREFERRED QUALIFICATIONS &amp; EXPERIENCE:We are looking for a current student in good academic standing in one of the following fields:<ul><li>Computer Engineering</li><li>Computer Science</li><li>Software Engineering</li></ul>Additionally, the ideal candidate will have:<ul><li>Proficiency in Python: Strong coding skills, experience in package development, working in a large code base.</li><li>Knowledge of Data Processing Practices: Experience with ETL processes, data plotting, and analysis.</li><li>Familiarity with Linux: Comfortable working in a Linux environment.</li><li>Development Best Practices: Understanding of git version control and development workflows.</li><li>Agile Processes: Experience with Agile methodologies and scoping work effectively.</li></ul>REQUIREMENT:&nbsp;Available to work full-time, on-site for a minimum of 12 consecutive weeks beginning November 2025.WHY JOIN US?<ul><li>Innovative Environment: Be part of a team that is integral to the success of our space missions.</li><li>Professional Growth: Gain hands-on experience in data engineering and software development.</li><li>Exciting Work Culture: Collaborate with experts across the company and contribute to projects that are pushing the boundaries of space exploration.</li></ul>Ready to launch your career in data engineering and be part of something extraordinary? Apply now and help us harness the power of data to drive our space missions forward!When applying, include a detailed cover letter stating what interests you about Rocket Lab and this role in particular. Feel free to be creative and stand out in your application and introduction to the team at Rocket Lab.&nbsp;Be sure to include relevant experience /personal or school projects you have completed that align with this role and why you believe you would be the best candidate for this role.&nbsp;WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Software Intern - Data Engineering

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!SOFTWARE&nbsp;At Rocket Lab, we’re redefining how humanity reaches space—and the IT team is at the core of making that vision a reality. From launch operations to finance, our global systems rely on a dedicated group of innovative problem-solvers who keep everything connected, secure, and running smoothly.As a key part of this team, you won’t just support everyday operations—you’ll help build and maintain the powerful, in-house software that enables mission-critical functions across our business. Whether it’s testing spacecraft components, optimising production, or streamlining launch processes, your code will directly support the rockets we send to space.We don’t just build rockets. We build the software that gets them there—faster, smarter, and more reliably. If you're ready to turn complex challenges into elegant solutions, you're in the right place.SOFTWARE ENGINEER II – PRODUCTION AUTOMATION (NIMBUS)As a Software Engineer II in our Production Automation team, you’ll help create the tools that ensure every component of our launch vehicle systems meets mission-critical standards.You’ll work at the intersection of engineering and manufacturing, building in-house applications that automate spacecraft testing, production workflows, and integration processes for our Electron launch vehicle. From avionics testing and vehicle system diagnostics to production floor optimisation, your code will make a direct impact on the success of our missions.WHAT YOU’LL GET TO DO:<ul><li>Develop and maintain production automation software for testing and integration of launch vehicle systems</li><li>Write clean, scalable code and unit tests for new features and bug fixes</li><li>Collaborate with stakeholders to deliver intuitive, high-impact tools</li><li>Contribute to software architecture and participate in code reviews</li><li>Support Agile workflows: sprint planning, stand-ups, and retrospectives</li><li>Manage code using Git and maintain clear technical documentation</li><li>Deploy and support software in a live production environment</li><li>Provide user training and gather feedback for continuous improvement</li></ul>YOU’LL BRING THESE QUALIFICATION &amp; SKILLS:<ul><li>3+ years of experience in software design, development, and testing, with a strong understanding of best practices</li><li>Proficiency in Python, C/C++, or TypeScript, with hands-on experience building scalable, maintainable code</li><li>Confident working across the full stack, particularly with modern front-end frameworks like Angular, React, or Vue</li><li>Solid experience in Linux-based development environments and working with relational databases and ORMs</li><li>Familiarity with Git and version control workflows in collaborative team settings</li><li>A proactive problem-solver with a passion for building high-impact software</li><li>Comfortable working cross-functionally in a fast-paced, mission-driven environment</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:&nbsp;<ul><li>Experience working with production or test automation systems</li><li>Web application and UI development</li><li>js and NestJS experience</li><li>Docker and Kubernetes experience</li><li>RxJS and observables</li><li>Embedded systems or hardware-software integration</li><li>Jira, CI/CD tools, and Agile development methodologies</li></ul>If you're exploring roles with the Nimbus team, you're looking at impactful software work.Apply now and take your next giant leap with Rocket Lab.WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Software Engineer II - Business Automation (Nimbus)

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!ABOUT MANUFACTURING AT ROCKET LAB:Rocket Lab’s Manufacturing team are the builders and the doers who work with our advanced machinery across our global manufacturing sites to get our satellites, satellite components, and rockets out the door. They bring the designs of our engineers to life by using advanced manufacturing techniques like 3D printing to create our hardware and are responsible for delivering our projects and missions on time and on budget to our customers.&nbsp;Rocket Lab is at the forefront of space innovation, and we're looking for top talent to join our team. If you're a high-performing individual with a background in Mechatronics, Aerospace Engineering or Manufacturing Engineering, we have opportunities that might be perfect for you!&nbsp; If you meet 50% of the requirements in this job ad – we want to hear from you with a variety of openings currently.WHAT YOU'LL GET TO DO:The Senior Manufacturing Engineer - Mechanical Assembly enables the production team to achieve the required production rates with the right quality. They are responsible for supporting all aspects of production at Rocket Lab. This is delivered by taking ownership of products released to production, removing production blockers, dispositioning non-conformance tickets, performing root-cause analysis, and implementing corrective actions.You will be responsible for the development, implementation, and continuous improvement of manufacturing processes and procedures, leveraging their strong working knowledge of both the product and best-practice manufacturing techniques. Manufacturing Engineers are also expected to work with the production team to develop manufacturing best practices, optimising processes for production, and implementing new processes through prototyping, test, and integration.YOU'LL BRING THESE QUALIFICATIONS:<ul><li>Strong problem-solving and risk mitigation skills with proven experience in a manufacturing setting</li><li>Mechatronics or Manufacturing Engineering background</li><li>Proficient in technical documentation and project ownership</li><li>Experienced with PLM/ERP systems and lean manufacturing</li><li>Skilled in new product implementation and tooling design</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>Experience in environmental/production testing (vibration, shock, thermal, vacuum)</li><li>Knowledge of instrumentation (power supplies, accelerometers, thermocouples, RTDs, pressure sensors)</li></ul>If you're ready to take your career to new heights with Rocket Lab, Apply now!Join us in shaping the future of space exploration!WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Senior Manufacturing Engineer - Mechanical Assembly

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!ABOUT THE TEAM:&nbsp;The Vehicle Integration Manufacturing Engineering team supports the Vehicle Integration and Launch Complex teams. Our team is responsible for supporting all systems on the vehicle, investigating and solving issues right up to launch. We also implement new products onto the vehicle, requiring a thorough understanding of how the vehicle works and how to install and test everything to ensure it is nominal for launch. We collaborate closely with almost every team at Rocket Lab, requiring extensive cross-functional knowledge and investigation. As such, we are an extremely close-knit team, often using our collective efforts to solve and improve processes at Rocket Lab.YOUR MISSION:<ul><li>Triage and solve production issues. Using this data to reduce repeat production issues and improve the end product</li><li>Improve manufacturing processes and tooling through investigation and project completion.</li><li>Increase production efficiency through data analysis and execution of improvements</li><li>Improve processes by designing and implementing new tooling.</li><li>mplement new designs – performing Design for Manufacture, as well as defining and implementing the method of manufacture.</li></ul>PREFERRED QUALIFICATIONS &amp; EXPERIENCE:<ul><li>Currently enrolled in one of the following: Aerospace / Aeronautical / Astronautical Engineering, Manufacturing Engineering, Mechanical Engineering, Mechatronics Engineering.</li><li>Experience in manufacturing process creation or Design for Manufacturing (DFM).</li><li>Skills in mechanical and systems-level investigation and problem-solving.</li><li>Proficiency in CAD.</li></ul>REQUIREMENT:&nbsp;Available to work full-time, on-site for a minimum of 12 consecutive weeks beginning November 2025.When applying, include a detailed cover letter stating what interests you about Rocket Lab and this role in particular. Feel free to be creative and stand out in your application and introduction to the team at Rocket Lab. Be sure to include relevant experience /personal or school projects you have completed that align with this role and why you believe you would be the best candidate for this role.&nbsp;WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Manufacturing Engineering Intern - Vehicle Integration

Senior Engineer Project Manager&nbsp;Interested candidates must apply to the Senior Engineer Project Manager posting by visiting careers.paturnpike.com by July 9, 2025.&nbsp;Posting Start Date:&nbsp;June 25, 2025&nbsp;Posting End Date:&nbsp;July 9, 2025&nbsp;Position Number:&nbsp;80000565&nbsp;Union:&nbsp;Non-Union&nbsp;FLSA Status:&nbsp;Salaried Exempt&nbsp;Department:&nbsp;Engineering - Bridge&nbsp;Salary Grade:&nbsp;E-17 or E-18&nbsp;Salary Range:&nbsp;$91,998.40-$138,008.00 &nbsp;or&nbsp;$104,208.00 - $156,332.80&nbsp;Employment Type:&nbsp;Full Time&nbsp;Building Location:&nbsp;Central Office Building&nbsp;Building Street:&nbsp;700 S. Eisenhower Boulevard&nbsp;Building City:&nbsp;Middletown&nbsp;Building State:&nbsp;Pennsylvania (US-PA)&nbsp;Building Zip Code:&nbsp;17057&nbsp;Work Schedule:&nbsp;Flexible Work Options&nbsp;The Pennsylvania Turnpike Commission, opened on October 1, 1940, is known as “America’s First Superhighway”!  Our mission is to operate a safe, reliable, customer-valued toll road system that supports national mobility and commerce.  The PTC operates a 565-mile system with over 205 million transactions annually.  Together, we are building the highway of the future.&nbsp;The Commission values its team members and understands the importance of work/life balance to the health, well-being and productivity of its team. Therefore, this position may be eligible for Flexible Work Options* such as:&nbsp;Hybrid Work - combination of remote and in-person reporting&nbsp;Alternate Work Schedule - flexibility to adjust work schedule length to complete work week in fewer days&nbsp;*Some options may require completion of probationary period. &nbsp; &nbsp;The Commission requires all employees to establish PA residency within 6 months of hire and to maintain PA residency, regardless of Flexible Work Options. &nbsp; &nbsp;Applicants must be currently authorized to work in the United States on a full-time basis.  The Commission will not sponsor applicants for work visas.&nbsp;Job Purpose and Summary&nbsp;This position is responsible for serving as the senior-level project manager on the most complex engineering projects for the Pennsylvania Turnpike Commission (PTC). Work involves independently directing multiple projects and/or programs at one time. Work assignments and objectives are received with little or no technical instruction and employees proceed with independence in working out the details and organization necessary to complete projects. Work requires the independent selection of courses of actions and resolution of problems within the framework of broad engineering and administrative guidelines. This position may function as a supervisor to lower-level engineers and provides project supervision to consultants.&nbsp;Essential Functions &amp; Responsibilities&nbsp;Provides direction and oversight to the work of lower-level engineering staff and consultants including supervision, performance management, delegation of work assignments, and review of work product. &nbsp;Serves as the primary project manager over the development and administration on the most complex traffic, facilities, design, and/or construction projects. Provides management with project briefings to inform and update on critical issues regarding decisions and solutions made within the broad scope of authority.&nbsp;Manages the full lifecycle of multiple complex projects. Develops the scope of work and participates in the consultant selection process. Manages and/or develops plans, specifications, standards, and cost estimates.&nbsp;Develops and manages project scheduling, cash flow projections, and activities to ensure proper project development and compliance. &nbsp;Performs field investigations, reviews, and surveys to ensure adherence to standards and specifications. Identifies potential problems and works to resolve them. &nbsp;Reviews and approves plans, specifications, studies, invoices, and estimates as prepared by consultants or contractors.&nbsp;Maintains professional liaison with internal/external staff and consultants, as well as other governmental and transportation agencies. Responds to and meets with property owners, agencies, and others who are affected by PTC projects.&nbsp;Reviews and/or prepares detailed and comprehensive reports, documents, and recommendations. Attends meetings to provide direction, subject matter expertise, consultation, and recommendations for assigned projects.&nbsp;Participates in traffic and safety surveys. Analyzes reports to identify problems and provides solutions. &nbsp;Conducts, participates, and/or represents the PTC in designated meetings, committees, planning groups, trainings, or seminars.&nbsp;Manages various PTC engineering programs.&nbsp;Performs duties requiring a broad knowledge and application of engineering principles and practices as they relate to all phases of assigned projects and job duties.&nbsp;Uses situational awareness to anticipate and prevent accidents.    &nbsp;Performs related duties as requested.&nbsp;Qualifications&nbsp;E-17 Qualifications &nbsp; Eight (8) years of engineering experience AND a bachelor’s degree in engineering or related discipline. &nbsp; Certain units may prefer a bachelor’s degree in a specific engineering discipline. &nbsp;Possession of a valid driver’s license. Must obtain and maintain a valid Pennsylvania driver’s license within six (6) months of employment.&nbsp;E-18 Qualifications&nbsp; Eight (8) years of engineering experience AND a bachelor’s degree in engineering or related discipline. &nbsp; Certain units may prefer a bachelor’s degree in a specific engineering discipline.&nbsp;Possession of a valid Professional Engineer (PE) license issued by the Pennsylvania State Registration Board for Professional Engineers. &nbsp;Possession of a valid driver’s license. Must obtain and maintain a valid Pennsylvania driver’s license within six (6) months of employment.&nbsp;Competencies&nbsp;Problem Solving/Analysis&nbsp;Comprehension of Engineering Principles and Standards&nbsp;Communication Proficiency&nbsp;Quality Control&nbsp;Project Management&nbsp;Attention to Detail&nbsp;Leadership&nbsp;Physical Demands and Work Environment&nbsp;Position demands include frequent speaking, writing, and reading reports. Position requires frequent work at a computer utilizing business programs and PTC specific operating systems. Position may require frequent travel and/or fieldwork with exposure to roadway traffic. Occasionally works outside of normal business hours for work assignments and projects.&nbsp;Office environment with low levels of noise, adequate lighting, and comfortable temperature. Field environment may include exposure to adverse and undesirable conditions. Physical environment is generally safe, but safety equipment or precautions must be followed in field conditions.&nbsp;Benefits&nbsp;The selected candidate will be offered an exceptional benefits package which includes comprehensive medical, dental, vision and prescription coverage, along with a benefit plan for retirement.  In addition, leave programs, tuition reimbursement, employee assistance program, and alternative work schedules are available to employees.  &nbsp;The Pennsylvania Turnpike Commission is an equal opportunity employer. We value diversity and are committed to creating an inclusive environment for all employees. If you need assistance or an accommodation due to a disability, you may contact the Human Resources Department by calling 717-831-7378.&nbsp;

652 Engineering Jobs