field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

Responsibilities<a>Howmet Aerospace</a>, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications.Summary: Howmet Structure Systems has an immediate opening for a Electrical Maintenance Technician located at our Niles Facility. This position is responsible for assisting in the maintenance operation and preventative maintenance of manufacturing equipment within the plant.Essential Duties and Responsibilities: This is not an exhaustive list of responsibilities; it is intended to provide a representative summary of the major duties and responsibilities of a Mechanical Maintenance Technician.Primary Function:To inspect, repair, replace, adjust, install, wire and maintain all electrical and electronic equipment in the plant or assigned area including power transmission lines transformers and related equipment. Make mechanical repairs as required in connection with electrical service.Tools and Equipment:Wiring diagrams, drawings, electrical and electronic tools, gauges, calibrative and testing equipment, hand tools, drill press, hand grinder, commutator and bench lathe, electrical drills, power hack saw, wire stripper, pipe threading machine, burning and welding equipment, soldering iron, pipe bender, bock and tackle, measuring tools, ect.Materials:A.C. and D.C motors and generators, transformers, rectlflers, electronic controls and regulator: various mill electrical equipment, power disruption and control circuits, electronic computing and controls systems, various types of instruments, data recording and processing equipment, control panels and circuits, electronic gauges and detectors, industrial T.V., public address systems, condensers, pumps, fans, poles, hardware, cable wire, conduit and fittings, lighting fixtures, repair and replacement parts, lubricants, ect. &nbsp;Working Procedures:<ul> <li>Receives verbal or written instruction covering the scheduling and emergency repair and installation and inspection work to be done.</li> <li>Analyzes all types of circuits and wiring diagrams to modify, service, install or repair all types of electronic devices and systems, various mill electrical equipment, electronic computing and controls systems, power and distributing control equipment, measuring, recording, processing and control devices, indication devices, instruments and gauges.</li> <li>Fabricates parts as required using machine and hand tools common to the trade. Burns, brazes, solders and performance simple layout, fabrication and welding in the servicing of electrical and electronic equipment, including related piping and mechanical component.</li> <li>Makes either temporary or permanent repairs or adjustments to equipment such as main motor drives, generators, control panels, relays, controllers, switchboards, circuit breakers, lighting circuits, resistors, etc.</li> <li>Install and repairs conduit, splicers, and insulates wires and cables, making splices on hot lines, isolates circuits for repairs.</li> <li>Maintains integrating, indicating, or graphic electrical or mechanical instruments.</li> <li>&nbsp;Makes mechanical repairs are required in connection with the servicing of electrical and electronic equipment including cranes.</li> <li>Advises when faulty equipment should be shut down for repairs.</li> <li>Tests, repairs and/or adjusts electronic scales to correct any variation from accuracy.</li> <li>Test, repairs and adjust electrical meters, such as osillograph, tachometers, ampmeter, voltmeter, power factory meters, phase shifter, etc.</li> <li>Cleans, paints, and lubricates equipment such as bearings, lights, reflectors, switch boxes, controls, pumps, compressors, fans, ect.</li> <li>Installs, repair and maintains power transmission lines, transformer, high tension sub station equipment such as disconnects, switch gear, bushings, insulator slings, lighting arrestors, phase wire grounding equipment.</li> <li>Assists other maintenance or operating personal in repair work as required.</li> <li>Fills out reports of maintenance work performed, parts and materials used, inspections made, etc.</li> <li>Operates cranes, machinery, mobile equipment, hydraulics lifts; erects and dismantles pepe scaffolds and performs necessary rigging duties in connection with the servicing of electrical and electronic equipment.</li> <li>Maintains a safe, clean&nbsp;and orderly conditions of work area and equipment.</li></ul>Pay Rate and Benefit<ul> <li>The combined rate of pay for this position is $36.61 per hour.</li> <li>We offer medical, dental, vision, 401k</li></ul>The above statements reflect the general details considered necessary to describe the principal functions of the job identified and shall not be constructed as a detailed description of all the work requirements that may be inherent in the job.Qualifications *Qualifications for Internal Candidates &nbsp; Basic Requirements<ul> <li>Must have completed a recognized, appropriate apprenticeship or have at least eight (8) years of relevant on-the-job industrial electrical experience, to include digital electronics, PLC’s, combustion, and instrument repair, or a two (2) year degree in Electrical Engineering Technology (or equivalent) with two (2) years of relevant on-the-job industrial electrical experience.</li> <li>High School diploma or GED</li> <li>Ability to work in a manufacturing atmosphere safely and follow safety practices and regulations; Must be willing and able to work any shift in a 24/7 operation and overtime including weekends and holidays.</li> <li>Ability to lift at least 50lbs as needed.</li> <li>Must have basic computer skills to create work orders, complete work orders, plan work, identify parts, and locate spare parts using a computerized maintenance management system after training.&nbsp;</li> <li>Must be able to legally operate company motor vehicles and mobile equipment.</li> <li>Must have strong math skills including reading fractions and decimals.</li> <li>Must have strong troubleshooting skills; Basic welding and flame cutting experience with a basic understanding of hydraulics and pneumatics.&nbsp;</li> <li>The position requires an individual to stand, climb, work at heights, stoop, move equipment; bend, reach, or lift for prolonged periods of time.&nbsp;</li> <li>PPE includes FR9 clothing, safety glasses, hard hat, and steel toed boots with metatarsal protection, hearing protection and other safety equipment as required.&nbsp;</li> <li>Qualified candidates must be able to pass a background test, physical&nbsp;and drug screen.</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

Maintenance Technician – Electrical

Start a fulfilling career as a Maintenance Specialist! We're a team. Our success is driven by the collective effort of each member in our warehouse, which has set us apart in the industry for 130+ years. We're dedicated to collectively challenging any supply chain problem with top-of-the-line technology and safety measures carried throughout the process. We wouldn't be where we are without our warehouse team. It's why we've built a culture-focused and diverse environment for you that offers opportunities for advancement with industry-leading benefits. As a Maintenance Specialist, you will maintain the service request database by inputting incoming maintenance or mechanic requests, understanding maintenance or mechanic requirements, and relevant labor requirements. Communicate with internal techniciansto ensure requests are handled in a timely cost-efficient manner. Keep track of all maintenance dates and details by inventory item (equipment, truck, or trailer). Benefits you can count on: <ul><li>Generous benefits that start on your 60th day: medical, dental, and vision insurance, FSA/HSA and company-paid life insurance. </li><li>Earn vacation time, and sick leave accrual from day one and paid holidays after 90 days. </li><li>401(k) Profit Sharing Plan after 90 days. </li><li>Additional benefits: pet insurance, parental leave, employee assistance programs, discount programs, tuition reimbursement program, and more! </li></ul> What you'll do as a Maintenance Specialist: <ul><li>Responsible for the tracking and monitoring of spare parts, purchase orders, work orders, warranties, and inventory levels of maintenance and/or maintenance items. </li><li>Tracks outstanding services and ensures expectations and deliverables are met. </li><li>Tracks and logs date and type of work completed by piece of equipment inventory (truck, trailer, equipment, etc.). </li><li>Monitors incoming invoices and submits for payment. </li><li>Monitors technical library. </li><li>Other duties as assigned. </li></ul> Qualifications you'll bring as a Warehouse Teammate: <ul><li>High school diploma or GED. </li><li>Sound communication skills. </li><li>Computer skills are required. </li><li>2 or more years of experience in an office environment. </li><li>Experience in inventory management or maintenance/mechanic department. </li></ul> Fit the following? We want you here! <ul><li>Organized </li><li>Problem solver </li><li>Teamwork oriented </li><li>Safety conscious </li><li>Detailed </li></ul> Moving America forward - together. We've been forging our path as a leader in the distribution industry since 1894. Building an expansive nationwide network of teammates for 130+ years has allowed us to stay agile for our clients across the restaurant, retail, and e-commerce industries. We look to the future and are ready to continue making industry-defining moves by embracing the newest technology into our practices, continuing team member training, and emphasizing our people-centered culture. Candidates may be subject to a background check and drug screen, in accordance with applicable laws. All applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. For our complete EEO and Pay Transparency statement, please visit <a href="https://www.mclaneco.com/legal/employment/" target="_blank">https://www.mclaneco.com/legal/employment/</a>

McLane

Specialist, Maintenance

Job Title Facilities Maintenance Supervisor Requisition Number RE52207 Working Title Department Name 3CP26:Campus Maintenance Central Work Location Lexington, KY Grade Level 45 Salary Range $22.73-37.50/hour Type of Position Staff Position Time Status Full-Time Required Education BA Click here for more information about equivalencies: <a href="https://hr.uky.edu/employment/working-uk/equivalencies" target="_blank">https://hr.uky.edu/employment/working-uk/equivalencies</a> Required Related Experience 5 yrs Required License/Registration/Certification None Physical Requirements Lifting, pushing, and/or pulling objects up to and possibly over 50lbs; Standing or walking with objects up to 25lbs; Sitting at computer workstation for extended periods; Repetitive motion. May be exposed to loud noises, fumes, confined spaces, and/or weather/temperature extremes while on a job-site(s) or traveling to/from various job sites. Shift 7:30 am – 4:15 pm (Monday – Friday) Hours of work and task assignments may vary dependent upon situational factors; crisis management; and/or weather-related factors, requiring night(s), weekend(s), and holiday(s) response. Job Summary Directly reporting to the Facilities Maintenance Manager, this position: <ul><li>Oversees maintenance service and repairs in the areas of plumbing, carpentry, painting, plastering, machine, electrical, and HVAC servicing for University Campus buildings and facilities</li><li>Oversees servicing, repairing, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles</li><li>Plans, organizes, sequences, schedules, and assigns daily maintenance workload based on work priority, quantity of equipment, and skill of personnel</li><li>Inspects equipment, structures, or materials to identify the cause of errors, problems, or defects as needed</li><li>Collaborates with maintenance technicians to generate and update daily workorders in SAP, ensuring accurate and complete information</li><li>Generates and distributes PMs, including lockout/tag-out sheets</li><li>Closes daily work orders by documenting accurate information of work performed, time to perform, parts used, equipment work was performed on, editing PM tasks, etc.</li><li>Coordinates emergency work and removes barriers for technicians</li><li>Follows-up with daily work through walks on job sites, inspection, testing, or measuring completed work to verify conformance to standards or repair requirements</li><li>Analyses information, uses logic, and develops new ideas and answers to address work-related problems</li><li>Interprets blueprints, specifications, or diagrams to plan, inform or develop work procedures or activities</li><li>Ensures performance of skilled repair or maintenance operations for 24/7 plant maintenance coverage and support.</li></ul> In addition, this position: <ul><li>Directly supervises assigned maintenance technician staff</li><li>Proactively and regularly initiates contact with customers and clients</li><li>Ensures the highest quality standards and compliance with all federal and state regulations</li></ul> Multiple positions available. Review of applications will begin immediately, and applications will be accepted until the deadline date or until all positions are filled which could be prior to deadline date listed. Skills / Knowledge / Abilities MS Windows/Office/Project; SAP; KRONOS Minimum of five (5) years related facilities maintenance including knowledge of machines and tools, their designs, uses, and repair — Preferred Knowledge of building and construction materials, methods, technical plans, blueprints, and drawings — Preferred Certified Facility Manager (CFM)— Preferred Driver’s License — Preferred&nbsp; Does this position have supervisory responsibilities? Yes Preferred Education/Experience Bachelor’s Degree in a related technical field — Preferred Deadline to Apply 11/26/2025 Our University Community We value the well-being of each of our employees and are dedicated to creating a healthy place for everyone to work, learn and live. In the interest of maintaining a safe and healthy environment for our students, employees, patients and visitors, the University of Kentucky is a Tobacco &amp; Drug Free campus. The University follows both the federal and state Constitutions as well as all applicable federal and state laws on nondiscrimination. The University provides equal opportunities for qualified persons in all aspects of institutional operations and does not discriminate on the basis of race, color, national origin, ethnic origin, religion, creed, age, physical or mental disability, veteran status, uniformed service, political belief, sex, sexual orientation, gender identity, gender expression, pregnancy, marital status, genetic information or social or economic status. Any candidate offered a position may be required to pass pre-employment screenings as mandated by University of Kentucky Human Resources. These screenings may include a national background check and/or drug screen.

Facilities Maintenance Supervisor

Take your career further with McLane! The McLane team is the driving force behind our success. A diverse group of professionals, from Sales and IT to Dispatchers and Mechanics, work together seamlessly to keep our operations running smoothly. Their dedication, expertise, and collaborative spirit are essential to achieving our goals and supporting other teams within the organization. As a member of our team, you'll have the chance to learn from industry leaders, develop your skills, and build lasting connections with colleagues nationwide. The Maintenance II position performs most aspects of troubleshooting, repair, and preventive maintenance actions on material handling equipment (MHE) and other facility support systems. They may also train lower grade mechanics and perform general building maintenance support. Benefits you can count on: <ul><li>The schedule for this position is Sunday-Thursday 11:00pm-7:30am </li><li>Generous benefits that start on your 60th day: medical, dental, and vision insurance, FSA/HSA and company-paid life insurance. </li><li>Earn vacation time, and sick leave accrual from day one and paid holidays after 90 days. </li><li>401(k) Profit Sharing Plan after 90 days. </li><li>Additional benefits: pet insurance, parental leave, employee assistance programs, discount programs, tuition reimbursement program, and more! </li></ul> What you'll do as a Warehouse Maintenance II teammate: <ul><li>Perform preventive maintenance and repairs on material handling equipment. </li><li>Perform maintenance activities on other distribution center equipment such as refrigeration systems, plumbing, building lighting, dock doors, air systems, racking, tote washers, and air spray painting. </li><li>Analyze, diagnose, and troubleshoot malfunctions using available specifications. </li><li>Research parts, tools, and technology; weld and fabricate as needed. </li><li>Ensure that spare parts usage, inventory and labor actions are accurately tracked and documented. </li><li>Work safely to prevent injury to people and damage to products and equipment. </li><li>Other duties may be assigned. </li></ul> Qualifications you'll bring as Warehouse Maintenance II teammate: <ul><li>Relevant technical degree; professional training is preferred. </li><li>At least 3 years of professional industrial maintenance experience, including experience with forklifts, reach trucks, order pickers, tuggers, and carts. </li><li>At least 2 years of material handling equipment maintenance experience. </li><li>Read and understand electrical schematics. </li><li>Familiar with OSHA regulations. </li><li>Basic computer skills as well as experience using a maintenance database such as MP2, DataStream 7i, or Maintenance Connection. </li><li>This position requires the ability to read, write, and understand English at a level sufficient to perform job-related tasks effectively and safely. This includes understanding work instructions, safety protocols, and communications essential to the role. The requirement is directly related to the nature of the job and ensures compliance with workplace safety and operational standards.</li></ul> Fit the following? We want you here! <ul><li>Teamwork oriented </li><li>Organized </li><li>Problem solver </li><li>Detailed </li></ul> Our roadmap. Our story. We've been forging our path as a leader in the distribution industry since 1894. Building an expansive nationwide network of team members for 130+ years has allowed us to stay agile for our clients across the restaurant, retail, and e-commerce industries. We look to the future and are ready to continue making industry-defining moves by embracing the newest technology into our practices, continuing team member training, and emphasizing our people-centered culture. Candidates may be subject to a background check and drug screen, in accordance with applicable laws. All applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. For our complete EEO and Pay Transparency statement, please visit <a href="https://www.mclaneco.com/legal/employment/" target="_blank">https://www.mclaneco.com/legal/employment/</a>

Maintenance II

Take your career further with McLane! The McLane team is the driving force behind our success. A diverse group of professionals, from Sales and IT to Dispatchers and Mechanics, work together seamlessly to keep our operations running smoothly. Their dedication, expertise, and collaborative spirit are essential to achieving our goals and supporting other teams within the organization. As a member of our team, you'll have the chance to learn from industry leaders, develop your skills, and build lasting connections with colleagues nationwide. This is a fully trained shop mechanic who is able to perform all required shop job duties and routine preventative maintenance functions. This position performs all repairs relating to a trailer and minor repairs relating to the refrigeration power unit. Benefits you can count on: <ul><li>Pay rate: $23.79 per hour. </li><li>Tuesday thru Saturday</li><li>Generous benefits that start on your 60th day: medical, dental, and vision insurance, FSA/HSA and company-paid life insurance. </li><li>Earn vacation time, and sick leave accrual from day one and paid holidays after 90 days. </li><li>401(k) Profit Sharing Plan after 90 days. </li><li>Additional benefits: pet insurance, parental leave, employee assistance programs, discount programs, tuition reimbursement program, and more!</li></ul> What you'll do as an Mechanic II: <ul><li>Perform the functions of a Grade 4 Mechanic.</li><li>Perform preventative maintenance and repairs on trailer refrigeration.</li><li>Perform simple and complex mechanical and electrical repairs.</li><li>Must be able to perform the following repairs without supervision:<ul><li>Diagnose, remove, repair, replace or rebuild:<ul><li>clutches</li><li>water pumps</li><li>tires</li><li>tractor suspension</li><li>body repairs</li><li>rear differentials</li><li>drive lines</li><li>transmissions</li><li>wheel seals</li><li>brake systems</li></ul></li></ul></li><li>Diagnose and tune up or make repairs on diesel engines.</li><li>Perform front wheel alignments.</li><li>Perform axle alignments on trailers.</li><li>Troubleshoot cooling systems.</li><li>Conduct diagnostic tests.</li><li>Cut or weld using cutting torch and welding machine.</li><li>Read, understand and use service bulletins and technical manuals.</li><li>Maintain shop tools.</li><li>Complete all paper work and computer input.</li><li>Comply effectively with company work and safety rules.</li><li>Effectively communicate both written and orally with supervisor and peers.</li><li>Follow directions.</li><li>Work independently and in a team environment.</li><li>Be trained and certified to operate any required equipment within 30 days after hire.</li><li>Comply with company attendance policy.</li><li>Maintain a flexible work schedule to meet the changing needs of the job. Must be available for shop on-call rotation, and able to do road calls using a company vehicle.</li></ul> Qualifications you'll bring as a Mechanic II: <ul><li>Have High School Diploma or GED. Trade school graduate in heavy duty diesel repairs, and/or refrigeration classes. Beginning level is preferred.</li><li>Have 2 years job experience on diesel repairs, tractor- trailer, refrigeration maintenance and repairs.</li><li>One year documented experience in fleet maintenance or one-year employment with company at upper scale of Class C Technician.</li><li>Posses basic hand tools (up to ½" drive) and tool storage.</li><li>Posses or acquire within 1 year from date of hire a current ASE certification in Medium/Heavy Truck Preventative Maintenance Inspection (PMI) (Test T8).</li><li>Possess a Valid Class C Drivers License. A Class A license is preferred but not required.</li><li>Stand, walk, bend, stoop, push, pull, grasp and reach above the head for extended periods of time.</li><li>Possess the following certifications:<ul><li>Certification with International Maxx Force 13 Engines.</li><li>Certification in Transportation Refrigeration.</li><li>Brake Systems and components.</li><li>Tractor A/C Refrigeration and Freon Recovery (609 license required).</li><li>Trailer Refrigeration 608 license required if working on trailer units.</li><li>Heavy Duty electrical diagnostics and repairs.</li><li>Prefer ASE Certification in heavy duty mechanics and Cummins or Detroit certification.</li></ul></li><li>This position requires the ability to read, write, and understand English at a level sufficient to perform job-related tasks effectively and safely. This includes understanding work instructions, safety protocols, and communications essential to the role. The requirement is directly related to the nature of the job and ensures compliance with workplace safety and operational standards.</li></ul> Fit the following? We want you here! <ul><li>Teamwork oriented </li><li>Organized </li><li>Problem solver </li><li>Detailed</li></ul> Our roadmap. Our story. We've been forging our path as a leader in the distribution industry since 1894. Building an expansive nationwide network of team members for 130+ years has allowed us to stay agile for our clients across the restaurant, retail, and e-commerce industries. We look to the future and are ready to continue making industry-defining moves by embracing the newest technology into our practices, continuing team member training, and emphasizing our people-centered culture. Candidates may be subject to a background check and drug screen, in accordance with applicable laws. All applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. For our complete EEO and Pay Transparency statement, please visit <a href="https://www.mclaneco.com/legal/employment/" target="_blank">https://www.mclaneco.com/legal/employment/</a>

Mechanic II

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.CompensationThe base hourly rate for this position is $27.20.Shift: 7:00 a.m. - 3:30 p.m. Monday-Friday. Some overtime required.Hourly Pay Range: $27.20-$32.00This is a skilled labor position working to install, repair and maintain machinery and mechanical equipment. The job requires that the employee be able to work safely and follow safety rules. Employee must be dependable, able to follow instructions and directions, according to established operating procedures. The employee must perform the following duties while cooperating with all levels within the organization in support of the four Johns Manville core values: People, Passion, Performance and Protection:Essential Duties and ResponsibilitiesThe hourly job classification system for the Johns Manville Ruston, LA Facility Maintenance Mechanic is based on a progressive structure. Job classifications and pay levels are based upon demonstrated skill sets.&nbsp;<ul><li>Supports and promotes safe practices and environmental commitments in alignment with company commitments, policies, and compliance requirements</li></ul><ul><li>Wears all personal protective equipment as required, including but not limited to protective shoes, glasses, ear plugs, bump cap or hard hat, gloves, dust mask or respirator</li></ul><ul><li>Must know, understand, and perform all plant and departmental safety regulations and procedures and immediately reports any hazardous conditions</li></ul><ul><li>Performs safety observations and complete training assignments</li></ul><ul><li>Must know and understand company policies, regulations, and procedures regarding employee conduct and attendance</li></ul><ul><li>Excellent attendance, attitude and motivation must be demonstrated to advance to the next level</li></ul><ul><li>Expected to perform duties with direct guidance as needed</li></ul><ul><li>Assist other maintenance personnel as needed</li></ul><ul><li>Troubleshooting by use of testing equipment and other measuring techniques</li></ul><ul><li>Manage down time by coordinating with production department personnel on routine preventative and predictive maintenance techniques</li></ul><ul><li>Dismantles devices to gain access to and remove defective parts using hand and power tools</li></ul><ul><li>Make adjustments to functional parts of equipment and control systems</li></ul><ul><li>Fabricate repair parts using shop equipment (welding equipment, cutting equipment, machine tools)</li></ul><ul><li>Maintain and test Boiler, CO2 House, Air Compressors, and plant critical systems</li></ul><ul><li>Layout, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, and cooling for process systems&nbsp;</li></ul><ul><li>ReplaceIndurator O-Rings and mold car bearings</li></ul><ul><li>Replace and/or adjust oven door cables</li></ul><ul><li>Repair and/or replace limit switches</li></ul><ul><li>Responsible for operating in conformance with the ISO certifications held by the Ruston facility</li></ul><ul><li>Familiarity with Preventative and Predictive Maintenance</li></ul><ul><li>Responsible for execution of MRO work orders which includes entering into SAP</li></ul><ul><li>Ability to effectively communicate mechanical issues when troubleshooting equipment/issues for internal customers</li></ul><ul><li>Required to respond to call ins and work the call in request</li></ul><ul><li>Must have own tools</li></ul><ul><li>Performs other duties as directed</li></ul>Education and/or Experience and Skills<ul><li>Associate degree or equivalent from two-year College or technical school (preferred) or one-year certificate from college or technical school; one to three years related experience and/or training; or equivalent combination of education and experience.</li></ul><ul><li>Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.&nbsp;</li></ul><ul><li>Ability to carry out instructions furnished in written, oral, or diagram form.</li></ul><ul><li>Ability to deal with problems involving several concrete variables in standardized situations.</li></ul>Supervisory ResponsibilitiesThe Mechanic job has no supervisory responsibilities.Preferred Certificates, Licenses, RegistrationsCertifications accepted in lieu of experienceCertificates include but not limited to<ul><li>Mechanic license or equivalent work experience</li></ul><ul><li>Welding certificate or equivalent work experience</li></ul><ul><li>Lathe certificate or equivalent work experience</li></ul><ul><li>Forklift, Diesel Mechanic certificates or equivalent work experience</li></ul><ul><li>Machinist certificate or equivalent work experience</li></ul>Physical DemandsThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.&nbsp; Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is frequently required to stand; walk; climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to use hands to finger, handle, or feel; reach with hands and arms and communicate accurately with coworkers.&nbsp; The employee will frequently engage in repetitive motions.&nbsp; The employee must frequently, lift, push or pull 25 pounds and must occasionally lift and/or move up to 100 pounds with assistance. Visual acuity is required to work around and with machinery including close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.&nbsp;Work EnvironmentThis job is in an industrial, manufacturing environment.&nbsp; The job requires working frequently around and with heavy machinery with moving mechanical parts, industrial ovens, and mobile equipment.&nbsp; The environment is not climate controlled and employees must be able to work in environments that may be extremely hot and humid or cold depending upon the operation and the season.&nbsp; Walking surfaces can be wet, dusty, and uneven.&nbsp; Areas of the building where work must be done have high noise levels, vibration, and/or fumes.&nbsp; Some working areas contain the presence of airborne particles which can irritate the skin or eyes.&nbsp; The manufacturing process involves toxic or caustic chemicals.&nbsp; Employees are required to wear personal protective equipment which includes steel toed shoes, ear protection, eye protection in certain areas may be required to where dust masks, respirators, or headprotection.Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Johns Manville

Industrial Maintenance Mechanic

<h4>MICHELIN RACEWAY ROAD ATLANTA</h4>Recognized as one of the world’s best road courses, Michelin Raceway Road Atlanta is a 2.54-mile road course situated in the rolling hills 35 minutes north of Atlanta. The multi-purpose facility hosts the 10-hour Petit Le Mans race that closes out the IMSA schedule and is the final of the four endurance races contested by the series. The track prides itself on a family-friendly atmosphere, with a “Kids 12 &amp; Under Are Always Free” policy.Michelin Raceway Road Atlanta seeks a part-time General Maintenance Laborer based in our Braselton, Georgia racetrack.This position is responsible for general building and facility maintenance and upkeep and ensuring that facilities are maintained at the highest standard level to provide safe environment for staff, visitors, and the public.Duties include but are not limited to:<ul><li>Perform general cleaning, garbage removal / disposal, from restrooms and common areas.</li><li>Perform general grounds keeping, sweeping, mowing and trimming grass using hand, power or riding mower, trims and edges around common areas, walkways, walls, etc.</li><li>Perform general manual labor tasks including loading, unloading, lifting, and moving materials.</li><li>Perform basic and general repair and maintenance on track equipment utilized in grounds keeping (mowers, hand tools, etc.).</li><li>Perform basic and general repair and maintenance of buildings, facilities and / or equipment as needed.</li><li>Operate forklift, front loader, or other equipment and/or vehicles, both on and off track and in common areas.</li><li>Maintain a safe working area.</li></ul>Required skills/experience:<ul><li>High school diploma and at least 1+ year of experience in building and facility maintenance.</li><li>Experience using common hand tools to perform basic repair and maintenance on buildings, facilities, and / or equipment.</li><li>Ability to plan, organize and coordinate multiple projects.</li><li>Effective time management, organization and multi-tasking skills.</li><li>Must be available to work some evenings and / or weekends.</li><li>Position is safety sensitive and participates in the corporate substance abuse drug testing program.</li><li>This position drives company-owned vehicles, including equipment, golf carts and other vehicles. Must pass driving record background check.</li></ul>Apply Now!Learn more about this role and our team by applying at <a href="http://www.careers.nascar.com" target="_blank">www.careers.nascar.com</a> for consideration.We are a company unlike any other. We want you to bring your experience, skills and passion to our close-knit, high-energy environment in which our employees thrive and where you can prosper. We know the key to our success is our employees and we offer highly competitive salaries, a solid benefits package focused on wellness, and opportunities for you to grow and develop both personally and professionally. It won’t take you long to find out that you are on the right track here at NASCAR!NASCAR is committed to fostering a diverse work environment where all employees feel valued and empowered. NASCAR is an Equal Opportunity Employer (EEO). We seek to attract and retain the best qualified people available. All qualified applicants will receive consideration for employment without regard to race, color, gender, gender identity and expression, age, national origin, disability, religion, sexual orientation, genetic information, pregnancy, veteran status or any basis that is protected by applicable law except where a bona fide occupational qualification exists.Follow us on LinkedIn and X for future opportunities and company news.

NASCAR

General Maintenance Laborer (Part-time)

Start a fulfilling career as a Warehouse Maintenance I! We're a team. Our success is driven by the collective effort of each member in our warehouse, which has set us apart in the industry for 130+ years. We're dedicated to collectively challenging any supply chain problem with top-of-the-line technology and safety measures carried throughout the process. We wouldn't be where we are without our warehouse team. It's why we've built a culture-focused and diverse environment for you that offers opportunities for advancement with industry-leading benefits. This position is an entry-level training and development position. The Maintenance I teammate troubleshoots, repairs, and perform preventive maintenance actions on material handling equipment and other facility support systems in the distribution center environment. Benefits you can count on: <ul><li>Pay rate: $20.00 per hour. </li><li>This shift is for Sunday to Thursday from 6am to 2:30pm</li><li>Generous benefits that start on your 60th day: medical, dental, and vision insurance, FSA/HSA and company-paid life insurance.</li><li>Earn vacation time, and sick leave accrual from day one and paid holidays after 90 days.</li><li>401(k) Profit Sharing Plan after 90 days.</li><li>Additional benefits: pet insurance, parental leave, employee assistance programs, discount programs, tuition reimbursement program, and more!</li></ul> What you'll do as a Warehouse Maintenance I: <ul><li>Ensure that spare parts usage, inventory and work order actions are accurately tracked and documented according to Company policy.</li><li>Assist with DC maintenance requirements such as (but not limited to) refrigeration systems, plumbing, building lighting, welding, dock doors, air systems, racking, tote washer, and air spray painting.</li><li>Maximize availability of all classes of batteries by managing charging cycles and battery rotation.</li><li>Perform inspections and cleaning; do specific gravity checks; evaluate cable serviceability and repair damage.</li><li>Develop a working knowledge of the required aspects of the McLane Maintenance Connection database.</li><li>Other duties may be assigned. </li></ul> Qualifications you'll bring as a Warehouse Teammate: <ul><li>At least 18 years of age.</li><li>High School Diploma or GED preferred.</li><li>At least 1 year of professional experience in industrial maintenance.</li><li>At least 1 year of maintenance experience with material handling equipment.</li><li>Able to read and understand electrical schematics.</li><li>Experience with distribution center industrial equipment, including (but not limited to) forklifts, reach trucks, order pickers, tuggers, and carts.</li><li>Knowledge of OSHA regulations.</li><li>Basic computer skills with experience in a maintenance database such as MP2, DataStream 7i, or Maintenance Connection. </li><li>This position requires the ability to read, write, and understand English at a level sufficient to perform job-related tasks effectively and safely. This includes understanding work instructions, safety protocols, and communications essential to the role. The requirement is directly related to the nature of the job and ensures compliance with workplace safety and operational standards.</li></ul> Fit the following? We want you here! <ul><li>Organized</li><li>Problem solver</li><li>Teamwork oriented</li><li>Safety conscious</li><li>Detailed </li></ul> Moving America forward - together. We've been forging our path as a leader in the distribution industry since 1894. Building an expansive nationwide network of teammates for 130+ years has allowed us to stay agile for our clients across the restaurant, retail, and e-commerce industries. We look to the future and are ready to continue making industry-defining moves by embracing the newest technology into our practices, continuing team member training, and emphasizing our people-centered culture. Candidates may be subject to a background check and drug screen, in accordance with applicable laws. All applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. For our complete EEO and Pay Transparency statement, please visit <a href="https://www.mclaneco.com/legal/employment/" target="_blank">https://www.mclaneco.com/legal/employment/</a>

Maintenance I

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.Pay Range$83,400.00-$114,600.00 AnnualThis is the base salary pay range that an applicant can expect to make upon hire. &nbsp; Pay within this range will vary based upon relevant experience, skills, and education among other factors. In addition, this position is eligible for an incentive bonus.&nbsp;The purpose of the Maintenance Supervisor’s role is to oversee the maintenance department responsible for all equipment, property, buildings and facilities within a manufacturing plant.&nbsp; The incumbent in this position will also be responsible for supervising maintenance personnel and supporting the operations of production, engineering and safety departments.&nbsp;&nbsp;&nbsp;Your Day to Day:<ul><li>Act as technical expert in regards to mechanical equipment</li><li>Supervise, set direction, and delegate daily work of assigned hourly mechanical and electrical employees to support the plant goals of safety, environmental and production</li><li>Lead safety process, training for crews and accident investigations&nbsp;</li><li>Monitor safety and environmental processes and compliance</li><li>Identify, isolate and facilitate resolution of maintenance performance issues such as quality of work and work efficiency</li><li>Troubleshoot process equipment operational problems and maintain, repair, and upgrade plant equipment</li><li>Identify and execute ways to track metrics of performance and improve production levels of employees</li><li>Share knowledge and business experience with Plant management team</li><li>Manage projects including obtaining contractor quotes, design help and directing contractor crews</li><li>Facilitate training of maintenance personnel</li><li>Identify, implement, and maintain best maintenance and safety practices</li><li>Conduct daily and monthly shift meetings</li><li>Maintain and enforce good housekeeping strategies and methodologies</li><li>Oversee the maintenance scheduling and work order system</li><li>Manage the maintenance and operations of the mobile equipment fleet and storeroom inventory</li><li>Manage hourly time and attendance process&nbsp;</li><li>Assist with MRO purchasing issues through maintenance software&nbsp;&nbsp;</li><li>May be required to perform other related duties as assigned</li></ul>What You Bring to the Team:<ul><li>High School/Technical School diploma with a minimum of 10 years of manufacturing experience in a mechanical and/or electrical maintenance role</li><li>Bachelor’s degree in mechanical engineering or related field preferred with a minimum of 5 years’ experience managing an industrial maintenance hourly workforce</li><li>Experience in preventative and predictive maintenance with demonstrated success in increasing equipment reliability</li><li>Working knowledge of plant systems with the ability to troubleshoot and implement corrective actions</li><li>Solid understanding of pneumatics, hydraulics, air compressor systems, cutting/welding techniques, fluid dynamic systems, and metal fabrication&nbsp;</li><li>General knowledge of mobile equipment repair, A/C and chiller systems and hydraulics</li><li>Thorough knowledge of high, medium and low voltage systems/control systems and instrumentation, and general industrial electrical</li><li>Proficient in Microsoft Word, Excel, PowerPoint, Outlook</li><li>Working knowledge in AutoCAD drawing interpretation&nbsp;</li><li>Working knowledge of SAP systems preferred</li><li>Strong interpersonal, verbal, and written communication skills</li><li>Solid project management and presentation skills&nbsp;</li><li>Demonstrated leadership skills</li><li>Solid analytical and quality improvement ability</li><li>Ability to work independently and in a team environment</li><li>Ability to interface at all levels of the organization, both internally and externally</li><li>Fundamental knowledge of laws, codes, and regulations (OSHA, National Electric Code, etc.) (Basic)</li><li>Willingness to respond to emergency situations outside normal work schedule</li><li>Manages a staff of 1 salary employee and 34 hourly employees, sets direction and deploys resources. Responsible for performance evaluations, pay reviews, hiring, and terminating.</li><li>Minimal travel required (0 – 10 days per year).</li><li>Work environment is typical of a manufacturing facility; may be exposed to environmental conditions of cold, heat, high noise levels, moving mechanical parts, heights, dust/mist/gas/fumes, extensive walking or climbing, etc.</li><li>May be required to lift, carry, push or pull up to and including 50 pounds.&nbsp;</li></ul>#LI-KL1#LI-ONSITE Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Johns Manville supports employee growth with vast educational opportunities and a company-wide mentoring program. This program pairs employees and leaders to grow skills, build stronger internal networks and strengthen the company’s succession planning process.&nbsp;Johns Manville also offers soft and hard skills training facilitated by internal and external presenters. Our talent management team prioritizes the holistic growth of our workforce.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Maintenance Supervisor

ResponsibilitiesJob Summary:&nbsp;The wax die maintenance technician will analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to fabricate and repair wax injection molds, metalworking dies, jigs and fixtures, gauges, and machinists' hand tools. Flexibility&nbsp;to work any shift including 2nd shift, 3rd shift, and weekend shift.Essential Functions &amp; Job Responsibilities:<ul> <li>Ability to read and follow the information on work instructions.</li> <li>Record data either manually or by computer as required.</li> <li>Must be mechanically inclined with the ability to inspect, troubleshoot, and service injection dies and molds.</li> <li>Studies specifications, such as blueprints, sketches, models, or descriptions and visualize product to determine materials. required and machines to be used to fabricate parts.</li> <li>Computes dimension, plan layout, and determine assembly method and sequence of operations.</li> <li>Measures, marks, and scribes metal stock for machining.</li> <li>Sets up and operates machine tools, such as lathes, milling machine, and grinder to machine parts and verifies conformance of machined parts to specifications.</li> <li>Lifts machined parts and positions and secure parts on surface plate or worktable.</li> <li>Smooth flat and contoured surfaces and fits and assembles parts together into assemblies and mechanisms.</li> <li>Verifies dimensions, alignments, and clearances.</li> <li>Heat-treat tools or parts.</li> <li>Examines new or previously used dies, tools, jigs, and fixtures, and recommends design modifications regarding construction and function of part.</li> <li>Develops specifications from general descriptions for specialty tools and draws or sketches design of product.</li> <li>Must be detail oriented and possess the ability to machine parts with tight tolerances.</li> <li>Must comply with all company attendance policies and guidelines; this includes, but is not limited to, regular attendance and occasional overtime.</li></ul>Skills and Abilities:<ul> <li>Ability to read and interpret documents, such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.</li> <li>Ability to work with mathematical concepts, such as fundamentals of plane, solid geometry and trigonometry. Ability to apply concepts, such as fractions, percentages, ratios, and proportions to practical situations.</li> <li>Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or scheduled form.</li> <li>Ability to set up, program, and operate CNC machines.</li> <li>Ability to create CAD models and drawings to use with CAM software.</li></ul>Equipment Used:&nbsp;Vertical milling machine, Bridgeport EZ Trax/Acu-Rite milling machine, tree journeyman CNC milling machine, personal computer, engine lathe, band saw, radial arm drill press, floor drill, pedestal grinder, surface grinder, precision tool grinder, abrasive cutoff saw, bridge crane heat treat oven, welding machine, acetylene torch, air grinders, power tools, and hand tools.QualificationsBasic Qualifications:<ul> <li>This position requires a minimum of high school diploma or GED certificate.</li> <li>This position requires a minimum of 5 years of toolmaker, CNC programming, &amp; Injection Die/Mold maintenance experience and/or training.</li> <li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

766 Facilities and Maintenance Jobs