field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

ResponsibilitiesJob Description:Under the supervision of the Maintenance Manager, the Maintenance Technician position is accountable for:<ul><li>Disassemble machines and take off parts for replacement or repair by using cranes, hoists, chain falls, hand tools, and jacks.</li><li>Examine or carry out tasks on broken machine parts and identify defective parts or give recommendations to supervisors on repair requirements.</li><li>Replace, fix, or realign machine parts and accessories in line with production specifications.</li><li>Put machine parts together after accomplishing maintenance and repair work. &nbsp;</li><li>Assists other maintenance team members in meeting department requirements while serving as a resource to production, engineering, and other plant personnel. Other individual maintenance craft knowledge considered a plus.</li><li>Work independently with little supervision.</li><li>Maintain a clean, organized, and safe work environment.</li><li>Exhibit outstanding ability to learn and comprehend the fundamentals of the functioning machines.</li><li>Excellent general understanding of hydraulic systems with display of mastery in troubleshooting by utilizing deductive reasoning and schematics</li><li>Perform other duties as assigned.</li></ul>QualificationsBasic Qualifications:<ul><li>High School Diploma or equivalent (G.E.D.) from an accredited institution (Required)</li></ul>Preferred Qualifications:<ul><li>Ability to lift 40 pounds</li><li>Electrical controls awareness a plus.</li><li>Knowledge of machine mechanics, pneumatics, hydraulics, blueprint reading, (welding and fabrication a plus) operation of machine tools used to make, modify and/or repair machine components.</li><li>Experienced and knowledge in maintaining and repairing&nbsp;injection presses.</li><li>3+ years previous manufacturing experience</li><li>Journeyman's Card is preferred</li><li>Ability to effectively work AND communicate as part of a cell team</li></ul>While not exposed to hazardous materials, this position requires wearing PPE (personal protection equipment). Following all basic safety precautions will reduce risk of potential injury. This position requires anywhere from light to moderate physical activity, such as walking, sitting, and standing for extended periods of time, as well as some lifting.Benefits:<ul><li>Competitive wages</li><li>Clean, air-conditioned work facility (even on factory floor)</li><li>401k savings plan includes 3% of your eligible compensation, and a match of your deferred pre-tax savings dollar-for-dollar up to 6% of your base pay</li><li>Tobacco-Free Credit</li><li>Medical, Dental, Disability, Vision, and Life Insurance available</li><li>Vacation Eligibility</li></ul>Howmet Aerospace’s Mission and Values:Everyone, Everyday, Everywhere… We win when our customers win; we innovate, deliver, and operate as world class. We excel as high-performance teams safely, with respect and integrity.Howmet Aerospace holds a leading, global position in commercial transportation and military defense aircraft markets. Working in close partnership with our customers, we solve complex engineering challenges to transform the way we fly, drive, and power. Through the ingenuity of our people and cutting-edge advanced manufacturing techniques, we deliver these high-quality products at an efficient rate that ensure customer success, shareholder value, and strive to improve the fuel economy. Howmet Aerospace is where your career takes flight!Howmet Aerospace - Tempcraft is a key internal supplier to Howmet Engine Systems (HES) through two Business Centers:<ul><li>Tooling Business Center (Wax, Plastic and Ceramic Injection Core Tooling, Fixtures, and Gauges).</li></ul>Hourly Range: $20-40 approximation (actual compensation is subject to variation due to factors such as education, experience, skillset, and/or location).About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

Maintenance Technician, 2nd Shift

Maintenance Technician, 1st Shift

ResponsibilitiesU Under the direction of Maintenance and Engineering Manager, this position is responsible for solving and identifying the root cause of repetitive problems. This position does not directly supervise other personnel. The incumbent communicates continually with all levels of personnel in Maintenance and Engineering Departments, as well as with other Maintenance personnel. Externally, they communicate with contractors and vendors.&nbsp; Responsibilities include but are not limited to:<ul><li>Reviewing production and maintenance downtime data proactively to prioritize issues (pareto analysis).&nbsp;</li></ul><ul><li>Developing solutions and action plans to eliminate issues by implementing the most effective actions. The action plans aim to provide a total benefit relatively close to the maximum possible result.&nbsp;</li></ul><ul><li>Investigating significant downtime events reactively to develop solutions and action plans to eliminate issues.&nbsp;</li></ul><ul><li>Leading Root Cause Analysis teams with area personnel to identify root causes of reliability issues, develop solutions, and identify action plans.&nbsp;&nbsp;</li></ul><ul><li>Communicating with Production and Maintenance Department personnel to determine problem areas and solve them.&nbsp;&nbsp;</li></ul><ul><li>Developing and preparing for solution implementation, which involves completing designs, ordering materials, and entering work orders into CMMS.&nbsp;</li></ul><ul><li>Working with maintenance teams and outside contractors and vendors to implement engineered solutions.&nbsp;&nbsp;</li></ul><ul><li>Communicating critical parameters (OA, Downtime, MTBF, etc.) and trends as corrective action items are completed.&nbsp;&nbsp;</li></ul><ul><li>Working with Engineering Department personnel to request capital expenditures and gain approval.&nbsp;</li></ul><ul><li>Coordinating training activities for hourly and salary staff in the Engineering and Maintenance Departments.&nbsp;</li></ul><ul><li>Driving the Predictive Maintenance (PdM) System, which includes lubrication, infrared, vibration, and ultrasonic technologies. This involves providing PdM work order actions that are detailed and continuously evaluate work order content. Frequently ensuring that work defined by PM/PdM has a measurable completion process.&nbsp;</li></ul><ul><li>Leading development of Failure Mode Effects Analysis (FMEA).&nbsp;&nbsp;</li></ul><ul><li>Performing other duties as assigned.&nbsp;&nbsp;</li></ul>BaQualificationssicQualifications&nbsp;Fo Under this position to be successful, the incumbent should have:&nbsp;<ul><li>A Bachelor’s degree in a related field from an accredited institution or 10+ years of manufacturing experience working with CMMS applications&nbsp;&nbsp;</li></ul><ul><li>Minimum 3 years of maintenance systems experience within a manufacturing environment&nbsp;</li></ul><ul><li>This position is subject to the International Traffic in Arms Regulations (ITAR), which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. ‘Green Card Holder’), Political Asylee, or Refugee.&nbsp;&nbsp;</li></ul>Pr Preferred Qualifications&nbsp;FoFor this position to be successful, preference is given to candidates with:&nbsp;&nbsp;<ul><li>Bachelor’s degree in Mechanical or Electrical Engineering&nbsp;</li></ul><ul><li>The ability to effectively communicate (verbally and written) and delegate while maintaining forward motion on key deliverables.&nbsp;</li></ul><ul><li>A high degree of interpersonal skills to motivate and influence others, including those not under their director supervision.&nbsp;</li></ul><ul><li>Demonstrated ability of problem solving, systems thinking, project management, and team building.&nbsp;&nbsp;&nbsp;</li></ul> Working Conditions&nbsp; This position involves moderate exposure to risk of accident and requires following basic safety precautions. Work is normally performed in a shared environment divided between the shop floor and an interior office space. Th is position occasionally requires wearing a tyvek suit when there is a possibility of exposure to hazardous materials. More regularly, the incumbent will wear full PPE to protect from mobile equipment and hot materials when on on the shop floor.&nbsp;&nbsp;Th This position requires moderate physical activity, such as walking, sitting, and standing for extended periods of time, as well as climbing ladders and working in confined spaces.&nbsp;&nbsp;Th This position also requires a willingness to maintain a flexible work schedule, further education, provide supervisory coverage when necessary and travel domestically as requested.&nbsp;&nbsp;&nbsp;About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Maintenance Asset Reliability Engineer

ResponsibilitiesHowmet Aerospace (NYSE: HWM) creates breakthrough products that shape industries. Working in close partnership with our customers, we solve complex engineering challenges to transform the way we fly, drive, and power. Through the ingenuity of our people and cutting-edge advanced manufacturing techniques, we deliver these products at a quality and efficiency that ensure customer success and shareholder value.&nbsp;Howmet Wheel Systems (HWS) is a business unit with a rich tradition and a bright future. We invented the forged wheel in 1948 and have remained the global leader in providing safe, strong, lightweight, and innovative aluminum transportation products ever since. ALCOA® Wheels are highly engineered products operating in challenging environments with significant product liability risk and wide diversity of end use applications ranging from passenger cars to heavy-duty trucks to commercial and military vehicles. HWS employs 1,700 people at 14 locations worldwide and produces over 4 million aluminum wheels globally with annual sales more than $800 million.Our customers trust us to deliver a wide range of great looking and dependable products that improve fuel economy and increase payload to address their customer’s business needs. Our Commercial Vehicle Wheel products lead the world in market innovation and truck, trailer, and bus customers recognize our LvL ONE®, Dura-Bright® and Ultra ONE® wheels as the current innovative products in this market.&nbsp;Job Dimensions:The Technical Operations Supervisor located in Cleveland, OH is the first level of authority in the manufacturing plant providing leadership, coaching and clear direction to ensure people are working safely, meeting customer demand, solving problems, eliminating waste and meeting goals. Flex Supervisors oversee and coordinate day-to-day production and maintenance execution of facility, equipment and machinery. The incumbent must be able to seek cooperation from others and must develop relationships to resolve problems. The incumbent must demonstrate:<ul><li>Knowledge and experience in applying lean manufacturing principles.</li><li>Demonstrated ability to train, develop and motivate subordinates.</li><li>Well-developed communication, leadership and problem-solving skills.</li></ul>Major Activities &amp; Key Challenges:&nbsp;Under the supervision of the Operations Manager, the Production Supervisor position is accountable for:<ul><li>Accountable for supervising, scheduling and leading a group of employees to meet departmental goals</li><li>Diagnose and assist in solving difficult maintenance and production problems and recurring malfunctions</li><li>Support operating results through the management of subordinates with emphasis on quantity, quality, timeliness, safety, recovery, and delivery performance</li><li>Ensure work is allocated fairly and clearly assigned to crew members; formulate and assign tasks within guidelines established by department management</li><li>Ensure all Environmental &amp; Safety policies are followed</li><li>Monitoring performance and implementing corrective actions to meet goals</li><li>Identifying and Implementing improvement plans</li><li>Effectively communicating with others within and outside the work group</li><li>Maintain all production and related quality assurance records</li><li>Providing leadership, direction and motivation to people in assigned area</li><li>Effectively manage employee and labor relations including contract administration, grievance handling and day-to-day employee complaints/issues</li><li>Responsible for meeting or exceeding maintenance and production goals including production output, safety, on time delivery, and people initiatives within a traditional unit supervisor role</li><li>Daily reviews of maintenance employee’s route sheets and PM’s, works with Maintenance Planner to create follow work orders as needed</li><li>Orders repair parts as needed, assists with identifying replacements for obsolete parts.</li><li>Direct the implementation of Howmet Aerospace Business System initiatives (lean manufacturing) including 5S, standardized work, work balance, product flow and TPM improvements</li><li>Own cost savings initiatives (degree of implementation).</li></ul>Environment, Health &amp; Safety Requirements:&nbsp;<ul><li>Contacts within the company are primarily with other Technical Supervisors, Engineering, Maintenance Planning, various Production departments, Purchasing, Labor Relation and Human Resources, Environmental and Safety, and outside contractors.</li><li>The incumbent recognizes that accident prevention is equal in importance to production, quality, delivery, and cost control, and accepts the responsibility to work safely and promote safety consciousness among fellow employees.</li></ul>QualificationsBasic Qualifications:<ul><li>High School Diploma or equivalent (G.E.D.) from an accredited institution</li><li>Minimum five years of experience in a manufacturing environment.</li><li>Minimum of one years of management, supervisory or team lead experience.</li><li>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Verification of employment eligibility will be required at the time of hire.</li></ul>Preferred Qualifications:<ul><li>Bachelor’s degree in Electrical or Mechanical Engineering or Business from an accredited institution.</li><li>Experience using Oracle software.</li><li>Experience in a union environment.</li><li>Experience in works engineering.&nbsp;</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Technical Operations Supervisor (maintenance and production) - 3rd Shift

ResponsibilitiesUnder the direction of the Maintenance Area Lead, this position is responsible for training, coaching, and motivating hourly crafts personnel to provide reliable equipment consistent with customer quality and delivery requirements. Direct reports include a group of hourly personnel assigned to their area and shift. The incumbent communicates continually with the Engineering and EHS Departments, as well as with Control Technicians and Maintenance Leads. Externally, they communicate with vendors and contractors.&nbsp;Responsibilities include but are not limited to:<ul> <li>Coaching, supervising, and training skilled craftspeople, apprentices, and laborers in the repair and maintenance activities associated with their assigned shift and area.&nbsp;</li> <li>Assuming single point accountability for maintenance activities during their respective shift.&nbsp;</li> <li>Performing frontline troubleshooting activities on equipment in area of responsibility.</li> <li>Directing safety awareness programs to manage workforce safety, maintain housekeeping, and assist the Operations Department in area safety analysis.&nbsp;</li> <li>Coordinating PM and other outage activities for equipment in area of responsibility.&nbsp;</li> <li>Planning daily activities for assigned maintenance crews and provide the tools, materials, and technical direction for normal maintenance, preventative maintenance, and capital work in area of responsibility.&nbsp;</li> <li>Performing root cause analysis and “5-why” techniques to eliminate maintenance downtime.&nbsp;</li> <li>Partnering with the Engineering Department on repetitive maintenance problems to continuously improve the reliability of responsible equipment and facilities.&nbsp;</li> <li>Coordinating and managing the development of maintenance work procedures and standard practices to maximize quality work and eliminate waste.&nbsp;</li> <li>Driving continuous improvement activities to eliminate all waste, especially as it relates to maintenance downtime, safety, work practices, and employee involvement.&nbsp;</li> <li>Assisting other Maintenance Supervisors, as needed.&nbsp;</li> <li>Managing applicable labor issues effectively within respective work area.</li> <li>Performing administrative requirements to effectively manage work force.&nbsp;</li> <li>Performing other duties as assigned.&nbsp;</li></ul>QualificationsBasic QualificationsFor this position to be successful, the incumbent should have:<ul> <li>A High School Diploma or GED equivalent from an accredited institution.&nbsp;</li> <li>Minimum 3 years of maintenance supervisory experience within a heavy manufacturing environment or a minimum of 1 year of supervisory experience in the Military.</li> <li>Minimum 1 year of experience in a unionized work environment.&nbsp;</li> <li>This position is subject to the International Traffic in Arms Regulations (ITAR), which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. ‘Green Card Holder’), Political Asylee, or Refugee.&nbsp;</li></ul>Preferred QualificationsFor this position to be successful, preference is given to candidates with:&nbsp;<ul> <li>A technical college degree, journeyman status, or a military equivalent.&nbsp;</li> <li>Experience with Allen Bradley programable logic controllers.&nbsp;</li> <li>Working knowledge of motor control centers and distribution control systems.&nbsp;</li> <li>Strong written and verbal communication skills.&nbsp;</li> <li>Demonstrated ability to work in and lead a multi-dimensional team.&nbsp;</li> <li>Troubleshooting experience on hydraulic and pneumatic systems.&nbsp;</li> <li>A strong electrical and/or hydraulics background. &nbsp;</li></ul>Working ConditionsThis position involves moderate exposure to risk of accident and requires following basic safety precautions. Work is normally performed on the shop floor. While not exposed to hazardous materials, this position requires wearing full PPE to protect from mobile equipment, hot materials, and noise when on the shop floor.&nbsp;This position requires moderate physical activity, such as walking, sitting, and standing for extended periods of time, as well as some lifting. &nbsp;This position also requires a willingness to maintain a flexible work schedule and be available 24/7.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Industrial Maintenance Supervisor - 2nd and 3rd Shift

ABOUT GREYSTARGreystar is a leading, fully integrated global real estate company offering expertise in property management, investment management, development, and construction services in institutional-quality rental housing, logistics, and life sciences sectors. Headquartered in Charleston, South Carolina, Greystar manages and operates more than $290 billion of real estate in 247 markets globally with offices throughout North America, Europe, South America, and the Asia-Pacific region. Greystar is the largest operator of apartments in the United States, manages more than 857,400 units/beds globally, and has a robust institutional investment management platform comprised of more than $76 billion of assets under management, including over $34 billion of development assets. Greystar was founded by Bob Faith in 1993 to become a provider of world-class service in the rental residential real estate business. To learn more, visit <a href="http://www.greystar.com" target="_blank">www.greystar.com</a>. JOB DESCRIPTION SUMMARYThis position performs technical and mechanical work that ensures the physical aspects of the buildings, grounds, amenities, and common areas of the property meet the Company’s standards for cleanliness, appearance, safety, and overall functionality.JOB DESCRIPTION•&nbsp;&nbsp; &nbsp;Completes assigned work orders generated from resident requests for service, as well as preventative maintenance on the property by diagnosing the source or cause of the defect or problem, and making repairs in accordance with established policies, procedures, safety standards, and code requirements. •&nbsp;&nbsp; &nbsp;Completes the “make-ready” process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a “punch” list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work. •&nbsp;&nbsp; &nbsp;Follows procedures for accessing and obtaining materials, supplies, equipment, tools, and other items from the property’s maintenance department by tracking inventory used, returning unused items to the established location, and notifying the maintenance supervisor about re-ordering needs. •&nbsp;&nbsp; &nbsp;Completes documentation and other paperwork in a timely, accurate, and complete fashion so that service requests can be appropriately documented and tracked. •&nbsp;&nbsp; &nbsp;Assists in maintaining the grounds, common areas, and amenities by picking up trash and debris, pressure-washing breezeways and pool areas, performing general cleaning, and painting curbs and signage as needed. •&nbsp;&nbsp; &nbsp;Supports cost-cutting and expense control programs by fixing rather than replacing parts when possible, not being wasteful with materials and supplies, and practicing the correct use for tools and equipment. •&nbsp;&nbsp; &nbsp;Complies with Greystar’s safety and risk-management policies by attending and participating in the property’s routine safety meetings, completing required training on OSHA and other safety related laws and requirements, and by reporting accidents and incidents promptly and accurately. •&nbsp;&nbsp; &nbsp;May periodically inspect work performed by contractors, vendors and other service providers to verify the work, materials and services meet quality standards, scope and specifications as required. •&nbsp;&nbsp; &nbsp;Assists in conducting routine and periodic property inspections to identify safety and risk management concerns, keep the property in good repair, and communicate concerns about the physical needs of the property to management. •&nbsp;&nbsp; &nbsp;Follows established policies and procedures by monitoring and ensuring compliance with regulatory requirements, organizational standards, and operational processes related to area(s) of responsibility and reporting violations or infractions to appropriate individual(s). •&nbsp;&nbsp; &nbsp;Practices proper safety techniques in accordance with Company, property, and departmental policies, procedures, and standards by immediately reporting any mechanical or electrical equipment malfunctions, employee/visitor/resident injuries or accidents, or other safety issues to appropriate individual(s). •&nbsp;&nbsp; &nbsp;Identifies areas for improvement and offers suggestions to improve efficiency and productivity. •&nbsp;&nbsp; &nbsp;Keeps abreast of current changes in technology, processes, and standards within the industry and area(s) of responsibility by attending internal and external training classes, research and/or subscribing to the internet or other professional publications, or utilizing other appropriate method(s) to obtain business and professional information, and applies knowledge and practices to area(s) of responsibility.#LI-AG1The hourly range for this position is $16.20 - $22.55.Additional Compensation:<ul><li>Corporate Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in&nbsp;an annual bonus program based on&nbsp;individual and company performance.</li><li>Onsite Property Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in weekly, monthly, and/or quarterly bonus programs.</li></ul>Robust Benefits Offered*:<ul><li>Competitive Medical, Dental, Vision, and Disability &amp; Life&nbsp;insurance benefits. Low (free basic) employee Medical costs for employee-only coverage; costs discounted after 3 and 5 years of service.</li><li>Generous Paid Time off. All new hires start with 15 days of vacation, 4 personal days, 10 sick days, and 10 paid holidays. Plus your birthday off after 1 year of service! Additional vacation accrued with tenure.</li><li>For onsite team members, onsite housing discount at Greystar-managed communities are available subject to discount and unit availability.</li><li>6-Week Paid Sabbatical after 10 years of service (and every 5 years thereafter).</li><li>401(k) with Company Match up to 6% of pay after 6 months of service.</li><li>Paid Parental Leave and lifetime Fertility Benefit reimbursement up to $10,000 (includes adoption or surrogacy).</li><li>Employee Assistance Program.</li><li>Critical Illness, Accident, Hospital&nbsp;Indemnity, Pet&nbsp;Insurance and Legal Plans.</li><li>Charitable giving program and benefits.</li></ul>*Benefits offered for full-time employees. For Union and Prevailing Wage roles, compensation and benefits may vary from the listed&nbsp;information above due to Collective Bargaining Agreements and/or local governing authority.Greystar will consider for employment qualified applicants with arrest and conviction records.

6 Facilities and Maintenance Jobs in Cleveland, OH, USA