field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

<h4>MICHELIN RACEWAY ROAD ATLANTA</h4>Recognized as one of the world’s best road courses, Michelin Raceway Road Atlanta is a 2.54-mile road course situated in the rolling hills 35 minutes north of Atlanta. The multi-purpose facility hosts the 10-hour Petit Le Mans race that closes out the IMSA schedule and is the final of the four endurance races contested by the series. The track prides itself on a family-friendly atmosphere, with a “Kids 12 &amp; Under Are Always Free” policy.SummaryResponsible for all general building and facility maintenance and upkeep; ensure all facilities are maintained at the highest standard level to provide safe environment for staff, visitors, and the public by performing the following duties.Essential Duties and Responsibilities include the following. Other duties may be assigned.Perform general cleaning, garbage removal/disposal, from restrooms and common areas.Perform general grounds keeping, sweeping, mowing and trimming grass using hand, power or riding mower, trims and edges around common areas, walkways, walls, etc.Performs general manual labor tasks including loading, unloading, lifting, and moving materials.Perform basic and general repair and maintenance on track equipment utilized in grounds keeping (mowers, hand tools, etc.)Perform basic and general repair and maintenance of buildings, facilities and /or equipment as needed.Operate forklift, front loader, or other equipment and/or vehicles, both on and off track and in common areas.Maintain a safe working area.No travel required.QualificationsTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Education and/or ExperienceHigh school diploma or general education degree (GED); or 1-3 years related experience and/or training; or equivalent combination of education and experience.Language SkillsAbility to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.Mathematical SkillsAbility to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.Reasoning AbilityAbility to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.Computer SkillsBasic computer skills.Other Skills and AbilitiesUse of common hand tools to perform basic repair and maintenance on buildings, facilities, and/or equipment. Ability to plan, organize and coordinate multiple projects. Effective time management, organization and multi-tasking skills.Other QualificationsMust be available to work some evenings and/or weekends.Position is safety sensitive and participates in the corporate Substance Abuse Program (SAP).This position drives company owned vehicles, including equipment, golf carts and other company-owned vehicles. Must pass driving record issued by Risk Management.Physical DemandsThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel. The employee is frequently required to stand; walk; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.Apply Now!Learn more about this role and our team by applying at <a href="http://www.careers.nascar.com" target="_blank">www.careers.nascar.com</a> for consideration.We are a company unlike any other. We want you to bring your experience, skills and passion to our close-knit, high-energy environment in which our employees thrive and where you can prosper. We know the key to our success is our employees and we offer highly competitive salaries, a solid benefits package focused on wellness, and opportunities for you to grow and develop both personally and professionally. It won’t take you long to find out that you are on the right track here at NASCAR!NASCAR is committed to fostering a diverse work environment where all employees feel valued and empowered. NASCAR is an Equal Opportunity Employer (EEO). We seek to attract and retain the best qualified people available. All qualified applicants will receive consideration for employment without regard to race, color, gender, gender identity and expression, age, national origin, disability, religion, sexual orientation, genetic information, pregnancy, veteran status or any basis that is protected by applicable law except where a bona fide occupational qualification exists.Follow us on Twitter @NASCARJobs to stay current on all of our openings.

NASCAR

General Maintenance Laborer (Part-time)

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.CompensationThe base hourly rate for this position is $32.02.Position Overview:Day shiftThis position is responsible for communicating and supporting JM core values and delivering the JM experience.The purpose of the Maintenance Technician’s role is to perform routine and non-routine maintenance on production and facility equipment to support production of roofing materials. This position is also responsible for meeting facility targets for safety, productivity, and machine uptime.&nbsp; This role will conduct effective problem solving and troubleshoot processes to develop corrective actions.Responsibilities:&nbsp; <ul><li>Follow all Johns Manville safety and environmental procedures and policies.</li><li>Attend plant safety and training meetings as scheduled.</li><li>Follow Job Safety Analysis (JSA's), uses safe work practices, and reports hazardous conditions at all times. Wear protective clothing &amp; equipment as required.</li><li>Develop JSA’s for new tasks and review JSA’s annually.</li><li>Perform routine and non-routine maintenance activities of mechanical and electrical systems.</li><li>Display advanced working knowledge of electrical (single phase and 3 phase), mechanical, hydraulics, and pneumatics systems.</li><li>Install and repair electrical conduit and cable, including connections, controls, grounding, etc.</li><li>Work from electrical and mechanical schematics to troubleshoot or install new or modify existing equipment.</li><li>Perform voltmeter, ammeter, wattmeter, and other electrical measurements.</li><li>Inspect equipment and reports on defective part and unsatisfactory conditions to further preventative maintenance program.</li><li>Maintain, adjust, service and lubricate equipment keeping it in good operating conditions with respect to proper aligning, functioning and lubrication of parts.</li><li>Participate in continuous improvement and Root Cause Corrective Action (RCCA) teams.</li></ul><ul><li>Assist co-workers as directed.</li><li>Perform and complete other work as assigned by supervisor.</li><li>Provides feedback and solutions to leadership on critical equipment issues pertaining to safety or operational capabilities</li><li>Display flexible outlook toward change management, working on cross-functional teams, training for the use of new tools and methodologies, and willingness and ability to obtain operating knowledge of all production equipment.&nbsp;&nbsp;</li><li>Participate in daily housekeeping efforts.&nbsp; Ensure job site is consistently clean after every job and clean maintenance shop after every shift.</li><li>May be required to perform other related duties as assigned</li></ul>Leadership Responsibilities:<ul><li>There are no supervisory responsibilities for direct reports for this position, but this person must have the skills to interact as a leader with all plant department employees.</li><li>Work with plant supervision to communicate the status of planned jobs, unplanned jobs waiting on parts, or unplanned jobs needing engineering or technical resources</li></ul>Requirements: (education, skills, and abilities)<ul><li>Must be signed off on all Maintenance Technician I job qualifications</li><li>2-5 years multi-craft maintenance experience</li><li>Strong commitment to safety</li><li>Ability to work well with others</li><li>Strong problem-solving capabilities</li><li>Excellent interpersonal and communications skills</li><li>Ability to work effectively in a fast-paced environment</li><li>Intermediate computer skills</li><li>Demonstrated ability to troubleshoot and handle multiple priorities and projects</li><li>Ability to disassemble, diagnose, repair, and perform preventative repair measures on mechanical equipment including, but not limited to: pumps, gearboxes, reducers, couplings, seals, rotating elements, blowers, fans, hydraulic units, valves, chillers, and compressors</li><li>Demonstrate advanced Mechanical aptitude, including pipe fitting, fabricating</li><li>Knowledge of use of hand tools and power tools</li><li>Knowledge of shop machinery, including hydraulic press, mill &amp; drill press, lathe, and saw(s) (band &amp; Chop)</li><li>General knowledge of building lighting systems</li><li>General knowledge of AC/heating systems</li><li>General knowledge of building fire alarm systems</li><li>Advanced knowledge of Lock, Tag, Clear, and Try program</li><li>General knowledge of PLC troubleshooting</li><li>General knowledge of VFD troubleshooting</li><li>Display understanding of 480V system to include arc-flash training and safe working practices per NFPA 70E</li><li>Ability to provide troubleshooting and diagnosis on process heating and cooling equipment</li><li>Ability to consistently make appropriate decisions while being flexible with regard to work assignments and priorities.</li></ul><ul><li>Local travel for training purposes</li></ul>Physical Requirements:The physical requirements of this position are: (these requirements are typical for most of our manufacturing roles)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <ul><li>The ability to stand for extended periods</li><li>The ability to manually lift, push or pull at least 50 pounds safely and with proper body mechanics, sometimes while in awkward positions.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Use of hands (repetitive motion, grabbing, feeling, sensing, pulling)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to work safely in a fast-paced, sometimes stressful work environment</li><li>The ability to safely and effectively work in an often-dusty work environment that experiences a broad range of temperatures (very hot to very cold).&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to withstand the rigors of working a 12(or 8)-hour rotating shift schedule.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to bend, stoop or kneel repetitively.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to reach or work above the shoulder&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li></ul>Incumbent must be physically able to perform essential job functions. Reasonable accommodation may be made to enable individuals with disabilities to perform essential job functions.Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Johns Manville

Maintenance Technician

Job Description:The Adjunct – Electrical position provides quality instruction and maintains a positive learning environment in the classroom, with major emphasis placed on teaching, supporting and evaluating students. The Adjunct role provides instruction and monitors teaching/learning effectiveness in courses assigned by the Department Chair, or other leadership members. The adjunct must exhibit strong organizational skills and the ability to multitask while engaging large groups of people with complicated material.ESSENTIAL JOB FUNCTIONSInstruction &amp; Student Learning<ul><li>Teaches assigned courses as scheduled and assumes primary responsibility for and exercises oversight of the curriculum in conjunction with department policies, ensuring both the rigor of programs and the quality of instruction. Designs curriculum embracing diversity in all forms to foster talent in students while modeling inclusive teaching strategies, with an understanding of the socio-cultural issues of traditionally underrepresented groups. Considers individual differences of students in order to design and support a range of appropriate learning activities. Participates in the identification of students with academic or other needs and responds by utilizing an appropriate resource. Uses technology in a manner appropriate to the nature and objectives of courses and programs and communicates clearly to students the expectations concerning the use of such technology. Keeps accurate and appropriate records in accordance with departmental policies.</li><li>Maintains attendance records, determines and submits grades timely, and in accordance with established policies and procedures of the College, and communicates progress feedback as well as other relevant information to students throughout the semester. Distributes and maintains accurate syllabi that incorporates departmental, college, cross-college, and instructor requirements. Conducts classes punctually and in accordance with the prescribed meeting schedule. Employs appropriate assessment techniques to measure students’ performance in achieving course goals and objectives. Engages in periodic meetings with the department, Lead Instructor, and Chairperson relative to teaching duties and professional development.</li></ul>Student Engagement &amp; Advisement<ul><li>Creates a positive classroom atmosphere that encourages active and collaborative learning, student effort, academic challenge, student and faculty interaction, and support for learners. Maintains posted office hours in accordance with departmental and policies of the College. Uses technology to assist in communication with students. Encourages a sense of community among students for learning both inside and outside the classroom.</li><li>Advises potential or current students within the discipline about the program, career, or transfer options available to assist with degree completion. Refers students to appropriate student and academic support services available at the College or in the community.</li></ul>Culture of Respect<ul><li>Fosters and maintains a safe environment of respect and inclusion for faculty, staff, students, and members of the community.</li></ul>Other duties as required*Regular, predictable, and punctual attendance is required. OTHER DUTIES &amp; RESPONSIBILITIES Attends all required department meetings and training, as requested.MINIMUM EDUCATION AND EXPERIENCE REQUIRED <ul><li>Completion of a Registered Apprenticeship Program specific to the electrical trade OR Five (5) years industry experience at Journey Level. Knowledge of residential/light commercial electrical code preferred.</li><li>State Motor Vehicle Operator's License or demonstrable ability to gain access to work site(s).</li><li>*An appropriate combination of education, training, coursework and experience may qualify a candidate.</li></ul>​KNOWLEDGE, SKILLS, &amp; ABILITIES Knowledge of: installation, repair, and service practices related to residential/light commercial systems; data analysis and application to operational business decisions; online instruction techniques and methods; Microsoft Office; Blackboard; internet research; online communication and record-keeping.Skill in: providing quality instruction; learning technologies and the use multi-media technology to enhance student learning; instructional planning and presentation; incorporating critical thinking, effective communication and other general education outcomes in course content; effective time management; proficiency with online communication record-keeping.Ability to: effectively communicate and use interpersonal skills; create engaging learning environments that respect a wide variety of viewpoints; be sensitive to the needs and concerns of a diverse student population, socio-economic, cultural and ethnic backgrounds and students with disabilities; work independently without ongoing direct supervision; meet deadlines; perform student learning outcomes; maintain confidential and sensitive information, including FERPA.PHYSICAL REQUIREMENTS <ul><li>Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions described in this position description. While performing duties of this job, the employee regularly exhibits digital dexterity when entering data into computer. The employee frequently sits for periods of time, stands, and walks. Employee converses verbally or manually with others in person as well as by telephone. Vision demands include close, relatively detailed vision when focusing on computer screen. Employee occasionally lifts up to 10 pounds.</li></ul>WORKING CONDITIONS <ul><li>Typical office environment. Regular exposure to moderate noise typical to business offices.</li></ul>CSCC has the right to revise this position description at any time. This position description does not represent in any way a contract of employment. Compensation Details: Compensation: $55.88 per contact hourContact Hour: Two hours equals one contact hourHours: Maximum of 12 contact hours per weekFull Time/Part Time:Part time

COLUMBUS STATE COMMUNITY COLLEGE

Adjunct – Electrical (Skilled Trades)

Job SynopsisThe Maintenance Assistant works on a team to maintain the beautiful grounds of MCC's Akron campus. This position involves a variety of landscaping and general maintenance tasks, including invasive plant management, landscaping projects, and general maintenance tasks as assigned.&nbsp; This&nbsp;position offers flexible hours and primarily involves outdoor work.&nbsp;Job DetailsHourly Employee Full TimeQualificationsOrganizational values and culture: All MCC workers are expected to exhibit a commitment to a personal Christian faith and discipleship; active church membership; and nonviolent peacemaking. MCC is an equal opportunity employer, committed to employment equity. MCC values diversity and invites all qualified candidates to apply.&nbsp;&nbsp;Essential:&nbsp;&nbsp;<ul><li>Basic proficiency with general landscaping hand tools.&nbsp;</li></ul><ul><li>Over three months experience in landscaping, groundskeeping and/or maintenance.&nbsp;&nbsp;</li></ul><ul><li>Ability to take initiative to start and complete projects without regular oversight.&nbsp;</li></ul><ul><li>Works well with a team and is respectful to diverse colleagues and campus guests&nbsp;&nbsp;</li></ul><ul><li>Willingness to engage in conversation as needed with guests, staff, and volunteers&nbsp;</li></ul>Preferred&nbsp;<ul><li>High School Diploma.&nbsp;</li></ul><ul><li>Experience working with native plants, horticulture, environmental science or similar field&nbsp;&nbsp;</li></ul><ul><li>Computer literacy including Microsoft Word, Zoom, Outlook email and web browsers&nbsp;</li></ul><ul><li>Beginning knowledge of more than one trade (carpentry, plumbing, electricity, HVAC).&nbsp;</li></ul><ul><li>Beginning knowledge of appliance repair, mechanics and basic machine operating.&nbsp;&nbsp;</li></ul><ul><li>Valid driver’s license.&nbsp;</li></ul>Employment eligibility: Legally eligible to work in the U.S. MCC offers of employment are subject to a successful criminal background check(s).&nbsp;Anti-oppression commitment: MCC expects all staff to actively participate in an organization culture that focuses on dismantling any barriers based on race, economic inequality or gender-based oppression. This includes an expectation to assess and address any barriers within themselves, within their team(s), and within MCC.&nbsp;Safeguarding commitment:&nbsp; All MCC Staff are expected to work collaboratively to create and maintain an organizational culture that prevents and responds to situations of abuse of power (sexual harassment, child abuse, racism, exploitation, and fraud among other situations).&nbsp;Key ResponsibilitiesSpecific Tasks and Duties: Landscape / General Maintenance&nbsp;<ul><li>Work on landscaping and general maintenance tasks and projects as assigned. Meet with supervisor to give progress updates.&nbsp;</li></ul><ul><li>Maintain grounds including tasks such as weeding, mulching, transplanting, removal of invasives in woodland, improvement of woodland.&nbsp;&nbsp;</li></ul><ul><li>Establish and maintain green mulch, native micro meadows, woodland, wetland, bioswale, and other landscapes.&nbsp;</li></ul><ul><li>Plant trees and shrubs.&nbsp;</li></ul><ul><li>Transport plants and goods on site via electric golf cart.&nbsp;&nbsp;</li></ul><ul><li>Join team meetings and respond to MCC electronic communications.&nbsp;&nbsp;</li></ul><ul><li>Assist with community/outdoor education events.&nbsp;</li></ul><ul><li>Other duties as assigned on a temporary basis.&nbsp;</li></ul>Supervision: This position does not have supervisory responsibilities.&nbsp;&nbsp;Travel expectations: No overnight travel.&nbsp;Physical Activity/Demands:&nbsp;<ul><li>Occasionally ascending or descending stairs/ladders, etc.&nbsp;&nbsp;</li></ul><ul><li>Occasionally remaining in a stationary position, often standing or sitting for prolonged periods of time.&nbsp;&nbsp;</li></ul><ul><li>Constantly moving about to accomplish tasks or move from one worksite to another.&nbsp;&nbsp;</li></ul><ul><li>Constantly light work that includes moving objects up to 20 pounds.&nbsp;&nbsp;</li></ul><ul><li>Occasionally operating power tools&nbsp;</li></ul>Environment Conditions – exposed to:&nbsp;<ul><li>Occasionally low temperatures.&nbsp;</li></ul><ul><li>Occasionally high temperatures&nbsp;</li></ul><ul><li>Occasionally outdoor elements such as precipitation and wind.&nbsp;</li></ul> Start Date02 Jun, 2025Salary DetailsBase salary: $20.32. Starting salary may be adjusted up to $22.58 based on previous experience.BenefitsMedical, dental and vision, 23 days paid vacation, sick time and 10 holidays/year. Life insurance provided, as well as long and short term disability coverage. The retirement plan, with MCC contribution of 7%, begins after six months of employment.

Mennonite Central Committee

Maintenance Assistant (Grounds)

Title: Maintenance Worker-Oak Ridge campus
Employee Classification:&nbsp;Skilled Crafts
Institution:&nbsp;Roane State Community College
Department: Physical Plant
Campus Location: Roane State Community College
Job Summary
The Maintenance Worker will be responsible for performing a variety of maintenance tasks to ensure the safety and overall functionality of college buildings, grounds, and equipment. The ideal candidate will have a strong work ethic, good communication skills, and the ability to work independently or as part of a team in a fast-paced campus environment.
Job Duties
• Responds to and completes work orders for various maintenance projects and requests in a timely manner.
• Performs basic plumbing maintenance, including repairing faucets, unclogging drain lines, rebuilding and replacing plumbing fixtures.
• Performs electrical repairs, including replacing light fixtures, lightbulbs and electrical switches and receptacles.
• Drywall repairs, painting, replacing ceiling tiles as well as carpet and floor tiles.
• Perform routine and preventative maintenance and to assess condition of buildings/systems.
• Assists with indoor and outdoor College event set-up and break-down, including tables, chairs, podiums, risers.
• Mow, weed eat, prune, etc.
• Other duties as assigned.
Minimum Qualifications
• High School Diploma or GED equivalent. • Valid state of Tennessee driver’s license • Must pass a background investigation, including a favorable motor vehicle record and criminal background report. 
Preferred Qualifications
Previous experience as a Maintenance Worker.
Knowledge, Skills, and Abilities
• Excellent customer service skills • Knowledge of basic carpentry, plumbing, and electrical skills. • Ability to use various tools and equipment. • Ability to work in different types of climates including both hot and cold, indoors and outdoors. • Ability to regularly push, pull, lift, move and carry 50-75 pounds. • The ability to be able to work occasional overtime in the evenings as well as nights and weekends to support campus events and/or respond to maintenance and weather issues. • Able to climb and work from ladders and scaffolding. • Knowledge of occupational hazards and safety precautions. 
Physical Demands / Working Conditions
Balancing, climbing, carrying, driving, pulling/pushing, reaching, repetitive movement, sitting, standing, twisting and bending.

Motlow State Community College


      Maintenance Worker-Oak Ridge campus
    

Join the Clean Energy RevolutionBecomeaFacilities Construction Senior Project Managerat Southern California Edison (SCE) and build a better tomorrow. In this job,&nbsp;you will:&nbsp; <ul><li>Manage capital facility projects from initiation to occupancy, ensuring compliance with policies, codes and regulations.</li><li>Oversee scope, schedule, and budget development, and track project progression.</li><li>Maintain project documentation, obtain financial approvals, monitor spend, and implement change control.</li><li>Provide leadership and direction to service providers, project and construction managers, and consultants.</li><li>Support project planning, estimating, scheduling, and procurement.</li><li>Facilitate vendor selection and business financial justification.</li><li>Advise leadership on project scope, risk, cost, and schedule.</li><li>Partner with Strategic Planning in the development of General Rate Case and Long Range Plan.</li><li>Develop project approval documentation, including business cases, financial reports, and presentations.</li><li>Present project updates to clients and senior leadership.</li></ul>As a&nbsp;Facilities Construction Senior Project Manager, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?<h4>Responsibilities</h4><ul><li>Manages activities of one or more large, mid to long-term projects with responsibility for results in terms of costs, methods and outcomes</li><li>Develops business plans, objectives and initiatives for the organization</li><li>Provides inputs to organizational objectives and policies and ensures delivery of results</li><li>Engages regularly with senior management as a key consultant on critical business issues</li><li>Leads feasibility studies, site selection, conceptual design, and proposal development for new facility projects</li><li>Coordinates workflows between general contractor, owners, and inspectors throughout the construction process</li><li>Champions construction standards, execution plans, commissioning protocols for institutional facilities</li><li>Implements quality control and inspection procedures to ensure construction meets codes, standards, and passes regulatory inspections</li><li>A material job duty of all positions within the Company is ensuring the protection of all its physical, financial and cybersecurity assets, and properly accessing and managing private customer data, proprietary information, confidential medical records, and other types of highly sensitive information and data with the highest standards of conduct and integrity.</li></ul><h4>Minimum Qualifications</h4><ul><li>Ten or more years of experience in facilities construction project management.</li></ul>Preferred Qualifications<ul><li>Bachelor Degree in Architecture, Engineering, Construction Management, other technical discipline or an equivalent combination of education, training, and experience.</li><li>Certificate in Construction Management, Project Management Professional (PMP) or other accredited certification.&nbsp; </li><li>Well-rounded understanding of building systems, infrastructure and architectural, engineering, design and construction practices.</li><li>Industry experience in new construction and renovation of commercial facilities.</li><li>Experience in procurement, contract management, supervision and oversight of contractors and service providers.</li><li>Experience in project planning, estimating and value engineering.</li><li>Competency in using computer applications including MS Office Suite and MS Project, to develop and manage reports and presentations.</li></ul>Additional Information <ul><li>This position’s work mode is hybrid. The employee will report to an SCE facility for a set number of days with the option to work remotely on the remaining days.&nbsp; Unless otherwise noted, employees are required to work and reside in the state of California.&nbsp; Further details of this work mode will be discussed at the interview stage. The work mode can be changed based on business needs.</li></ul><ul><li>Visit our Candidate Resource page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more! </li><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.</li></ul><ul><li>The primary work location for this position is Rosemead. </li><li>Position may require up to 20% traveling and being out in the field throughout the SCE service territory.&nbsp; </li></ul><ul><li>This position has an option for a 9/80 Alternate Work Schedule or 40hrs/5 days a week.</li><li>Relocation does not apply to this position.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.At SCE, we celebrate our differences. We are a proud Equal Opportunity Employer and will not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other protected status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

Southern California Edison

Facilities Construction Senior Project Manager

Join the Clean Energy RevolutionBecomeaFacilities Construction Project Managerat Southern California Edison (SCE) and build a better tomorrow. In this job,&nbsp;you will:&nbsp;<ul><li>Manage capital projects directly or with contract service provider support.</li><li>Lead projects from initiation to occupancy, providing dedicated support for planning, design, and construction.</li><li>Manage scope, schedule, and budget; monitor progress and address variances.</li><li>Provide direction and oversight to service providers, project managers, and consultants.</li><li>Develop financial documentation, including business cases, reports and presentations.</li><li>Facilitate procurement and vendor acquisition.</li><li>Prepare and present project updates to clients and senior leadership.</li></ul>As a&nbsp;Facilities Construction Project Manager, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?<h4>Responsibilities</h4><ul><li>Manages the activities of one or more moderate to large, short to mid-term projects with responsibility for results in terms of costs, methods and outcomes</li><li>Exercises considerable latitude and judgement in developing plans, budgets, and resources, directing activities and actions, and determining deliverable</li><li>Decides appropriate methods, procedures for new projects with significant independence</li><li>Engages with all levels of management and acts as a key consultant for both functional and business issues</li><li>Conducts constructability reviews, workshops, and other processes to optimize construction efficiency, methods, and sequencing</li><li>Directs construction teams in executing complex activities like foundations, structural work, and systems installation per project specifications</li><li>Manages change orders, requests for information, submittal reviews, and other technical project documentation and communication</li><li>Analyze facility metrics like cost per square foot, system downtime, quality defects to guide continuous improvement</li><li>A material job duty of all positions within the Company is ensuring the protection of all its physical, financial and cybersecurity assets, and properly accessing and managing private customer data, proprietary information, confidential medical records, and other types of highly sensitive information and data with the highest standards of conduct and integrity.</li></ul><h4>Minimum Qualifications</h4><ul><li>Seven or more years of experience in facilities construction project management.</li></ul>Preferred Qualifications<ul><li>Bachelor Degree in Architecture, Engineering, Construction Management, other technical discipline or an equivalent combination of education, training, and experience.</li><li>Certificate in Construction Management, Project Management Professional (PMP) or other accredited certification.&nbsp; </li><li>Industry experience in new construction and renovation of commercial facilities.</li><li>Demonstrated understanding of building systems, infrastructure and architectural, engineering, design and construction practices.</li><li>Experience in procurement, contract management, supervision and oversight of contractors and service providers.</li><li>Experience in project planning, estimating and value engineering.</li><li>Competency in using computer applications including MS Office Suite and MS Project, to facilitate project management, develop reports and presentations. </li></ul>Additional Information <ul><li>This position’s work mode is hybrid. The employee will report to an SCE facility for a set number of days with the option to work remotely on the remaining days.&nbsp; Unless otherwise noted, employees are required to work and reside in the state of California.&nbsp; Further details of this work mode will be discussed at the interview stage. The work mode can be changed based on business needs.</li></ul><ul><li>Visit our Candidate Resource page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more! </li><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.&nbsp;</li></ul><ul><li>The primary work location for this position is Rosemead. </li><li>Position may require up to 20% traveling and being out in the field throughout the SCE service territory.&nbsp; </li></ul><ul><li>This position has an option for a 9/80 Alternate Work Schedule or 40hrs/5 days a week.</li><li>Relocation does not apply to this position.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.At SCE, we celebrate our differences. We are a proud Equal Opportunity Employer and will not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other protected status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

Facilities Construction Project Manager

Compensation Type: HourlyCompensation: $26.81Job SummaryThe Maintenance Lead is responsible for leading a team of Maintenance Technicians by assigning and monitoring work assignments, mentoring and training staff, leading by example, exhibiting professionalism, communicating expectations, and developing working relationship with the maintenance team. The Maintenance Lead performs complex tasks related to day-to-day inspections, preventive maintenance and repair of buildings and equipment and stays proficient in various skilled trades.ESSENTIAL JOB FUNCTIONSMaintenance Lead <ul><li>Assists supervisor in assigning and monitoring work assignments by leading a team of Facilities Maintenance Technicians. Mentors, trains, and provides technical expertise to other staff. Trains employees and provides instruction to work teams as needed. Performs complex tasks related to day-to-day inspections, preventive maintenance and repair of buildings and equipment and stays proficient in various skilled trades (i.e., plumbing, carpentry, HVAC, electrical, roofing, etc.).</li><li>Oversees and trains Maintenance Technicians in maintenance, repairs, and projects related to campus facilities in compliance with Work Orders/PM’s and maintenance schedule. Oversees/trains/inspects Maintenance Technicians electrical repairs and motor replacement, lighting ballast and bulbs, electric switches, fuses, circuit breakers, receptacles, minor electric wiring installation and repairs. Performs routine building inspections, creates quotes for (in house) Union labor projects, and demonstrates excellent customer relations skills.</li><li>Identifies, communicates, coordinates, and completes projects and work performed in the assigned area(s). Oversees/trains/inspects building plumbing system, fix water leaks, unclog drains and replace seals and valves. Repairs and replaces sink and floors drains, faucets, and other fixtures.</li><li>Responds to emergency situations and evaluates and corrects defects. Oversees/trains/inspects preventive and repair maintenance duties of heating, ventilating, air conditioning and refrigeration systems (proficient in automation controls). May assist with installing new units or replacement parts for existing units according to specifications and established safety guidelines. (e.g., cleaning or changing filters, lubricating motors, tightening belts, etc.)</li></ul>Maintenance Support<ul><li>Clears walks, stairs, parking lots and roadways of ice and snow. Shovels and applies calcium and salt to areas. Utilizes shovels, snow blowers, tractors, salt spreaders, and trucks for snow removal. Applies salt, calcium, and sand to various areas to melt ice and provide safer conditions. Provides general support in other areas and assists with set-ups during special events.</li><li>Leads by example, exhibits professionalism, communicates expectations, and develops working relationship with entire maintenance team with no bias, prejudice, or favoritism. Assists other trades as needed, adheres to all safety practices and procedures, and cleans and maintains work areas and equipment. Provides a high level of customer service and communicates to customers, coworkers and supervision via written, electronic, and verbal methods and devices.</li></ul>Administration <ul><li>Maintains accurate records of all equipment repairs, maintenance, and expenditures. May review purchase invoices and approve for payment. Makes routine purchases as authorized by management. Enters, fulfills, and submits completed PM’s/Works Orders in an accurate and timely manner.</li></ul>Culture of Respect<ul><li>Fosters and maintains a safe environment of respect and inclusion for faculty, staff, students, and members of the community.</li></ul>Other Duties &amp; Responsibilities:<ul><li>Attends all required department meetings and training.</li><li>Works assigned schedule, exhibits regular and predictable attendance.</li><li>Assist the Police Department during evacuations and emergencies. Assists at off-campus locations with maintenance and supply delivery.</li></ul>Minimum Education and Experience Required:<ul><li>High School Diploma or GED and five (5) years of demonstrable experience working in various trades (i.e., plumbing, carpentry, HVAC, electrical).</li></ul>Licenses and Certifications:<ul><li>State Motor Vehicle Operator's License or demonstrable ability to gain access to work site(s).</li><li>Must be insurable to operate a vehicle as a condition of initial and continued employment.</li></ul>Physical Conditions:<ul><li>Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions described in this position description. While performing duties of this job, the employee regularly exhibits digital dexterity when entering data into computer. The employee frequently sits for periods of time, stands, and walks. Employee converses verbally or manually with others in person as well as by telephone. Vision demands include close, relatively detailed vision when focusing on computer screen. Employee occasionally lifts up to 50 pounds.</li></ul>Working Conditions: <ul><li>Exposure to direct sunlight, rain, and humidity while working outside for extended periods of time. Exposure to noisy vibrating equipment such as blowers, chainsaws, weed eaters, and other power equipment. Exposure to dirt, dust, debris, and odors. May experience minor cuts, burns, or other situations that may cause injury. Occasional risk of electric shock. Employee may be exposed to fumes or airborne particles, toxic, or caustic materials, and blood borne pathogens.</li></ul>CSCC has the right to revise this position description at any time. This position description does not represent in any way a contract of employment.Full Time/Part Time:Full timeUnion (If Applicable):TeamstersScheduled Hours:40Additional InformationIn order to ensure your application is complete, you must complete the following:<ul><li>Please ensure you have all the necessary documents available when starting the application process. For all faculty positions (Instructor, Annually Contracted Faculty, and Adjunct), you will need to upload an unofficial copy of your transcript when completing your aplication. </li><li>Prior to submitting your application, please review and update (if necessary) the information in your candidate profile as it will transfer to your application.</li></ul>If you are a current employee of Columbus State Community College, please log in to Workday to use the internal application process.Thank you for your interest in positions at Columbus State Community College. Once you have applied, the most updated information on the status of your application can be found by visiting your Candidate Home. Please view your submitted applications by logging in and reviewing your status.

Lead Maintenance - Plumbing

Summary: Howmet Structure Systems has an immediate opening for an Electrician located at our Canton facility. This position is responsible for installation and repair of electrical systems, devices and electrical/electronic components of industrial machinery and equipment. Salary based on experience. Howmet Aerospace is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. Essential Duties and Responsibilities: This is not an exhaustive list of responsibilities; it is intended to provide a representative summary of the major duties and responsibilities of an Electrician. <ul><li>Install power supply wiring and conduit for newly installed machines and equipment such as robots, conveyors, and programmable controllers.</li><li>Connects power supply wires to machines and equipment and connects cables and wires between machines and equipment.</li><li>Diagnoses malfunctioning apparatus such as transformers, motors and lighting fixtures and replaces damaged or broken wires and cables.</li><li>Tests malfunctioning machinery and discusses malfunction with other appropriate personnel to diagnose malfunction.</li><li>Troubleshoot PLC programming as well as various communication formats.</li><li>Replaces faulty electrical components such as relays, switches, motors, and sensors.</li><li>Diagnoses and repairs or replaces faulty components such as printed circuit boards.</li><li>Replaces electric motor bearings and rewires motors.</li><li>Plans layout of wiring and installs wiring, conduit, and electrical devices in buildings.</li><li>Work with 480V 3 Phase electricity as well as high voltage up to 138KV.</li><li>Knowledgeable of the National Electric Code and OSHA regulations and NFPA regulations regarding arc flash.</li><li>May need to install/remove non-electrical components while working on a specific issue.</li><li>Must be flexible with work schedule, must be willing to be on call, work weekends and overtime as needed.</li><li>Provide support and offer guidance to cross-functional team members</li><li>Adhere to all standard operating procedures and ensure compliance with all safety and quality processes.</li></ul> Basis Qualifications: <ul><li>Associates degree or equivalent from two-year college or technical school; 3 years related experience and/or training; or equivalent combination of education and experience.</li><li>High voltage work and maintenance.</li><li>Ability to read, analyze and interpret documents such as technical procedures, governmental regulations, safety rules, operating and maintenance instructions, procedure manuals, drawings, and blueprints.</li><li>Ability to write reports, business correspondence and procedure manuals.</li><li>Ability to apply common sense to carry out/interpret instructions furnished in written, oral or diagram form.</li><li>Ability to deal with problems involving several variables in standardized situations.</li><li>Ability to keep an open mind, think out of the box and demonstrate a desire for continuous improvement.</li><li>Demonstrate excellent communication skills with both management and operators.</li><li>Physical Demands: The employee is regularly required to stand, walk, sit; use hands and fingers to handle or feel; reach with hands and arms and climb or balance. The employee is frequently required to stoop, kneel, crouch or crawl and talk or hear. The employee must frequently lift and/or move up to 50lbs. Specific vision abilities required by this job include close vision.</li><li>Work Environment: The employee is frequently exposed to moving mechanical parts. The employee occasionally works in wet and/or humid conditions with fumes or airborne particles, and toxic or caustic chemicals. The noise level in the work environment is loud and the employee will be required to wear hearing protection.</li></ul> Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. This position entails access to export-controlled items and employment offers are conditioned upon an applicant’s ability to lawfully obtain access to such items. Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

Electrician

<h4>Service (Maintenance) Technician&nbsp;&nbsp;</h4>River Pointe Apartments in Fridley, Minnesota What's in it for you?&nbsp;The base salary for this position is expected to start at $20.00- $24.00/hour, with the actual base salary amount dependent on a number of factors, including but not limited to a candidate's credentials, relevant experience, and primary job location, with consideration given to internal equity. This position is also eligible for a $1,000 sign-on bonus, distributed in two installments at 30 and 90 days of employment.This position is also eligible for:<ul><li>Quarterly Lease Renewal Bonus</li><li>Competitive PTO</li><li>Generous time off - 10 paid holidays, plus diversity day and your birthday</li><li>Paid Caregiver and Paid Parental Leave</li><li>20% Rent, Parking, and Storage Discount for Centerspace rents</li><li>32 Paid Hours of Volunteer Time Off</li><li>Medical/Dental/Vision Benefits – 1st of Month Following Start Date</li><li>Centerspace Stock Purchase Plan</li><li>401(k) match up to 5% per paycheck</li><li>Tuition Reimbursement &amp; Scholarship Program</li></ul>About Centerspace:&nbsp;Centerspace&nbsp;was founded in Minot, North Dakota, in 1970. You can find our corporate support offices located in Minneapolis, Minnesota and in Minot North Dakota, along with onsite operations in six states. From Denver, CO to Minneapolis, MN, our company continues to grow throughout the Midwest, proudly providing apartment homes to thousands of residents, extending our vision to be the premier provider of apartment homes in vibrant communities by focusing on integrity and serving others.&nbsp;Centerspace is built around our employees.&nbsp; Our Mission and Vision unites our employees as one team.Maintenance Technician A Day in the Life: In our entry level Maintenance Technician role, you will work with the Service team to help prepare new apartment homes for our residents. You will be assisting in routine repairs of building systems and completing service requests. You play a supporting role in the upkeep of the property’s buildings and grounds, while providing excellent customer service to our residents. Key Role Responsibilities:<ul><li>Perform general maintenance such as plumbing, electrical, HVAC repairs, carpentry, appliance repairs, painting/drywall, etc.</li><li>Maintain efficient operation and upkeep of the property buildings and grounds</li><li>Perform routine maintenance on vacant units prior to new resident occupancy</li><li>Respond to resident service requests; enter and track requests using a work order system</li><li>Keep all amenity areas in clean and operable condition. Seasonally, assist with snow removal and groundskeeping.</li></ul>Requirements Include:<ul><li>Must be available for on-call work (possible evening, weekend, and overnight calls) via a rotating schedule.</li><li>Valid driver’s license.</li><li>Willingness to learn and complete plumbing, electrical, carpentry, dry-wall and painting tasks. Prior knowledge in these areas is helpful, but not required.</li></ul>We can’t create Better Every Days without YOU! Apply now!

748 Facilities and Maintenance Jobs