field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

<h4>MICHELIN RACEWAY ROAD ATLANTA</h4>Recognized as one of the world’s best road courses, Michelin Raceway Road Atlanta is a 2.54-mile road course situated in the rolling hills 35 minutes north of Atlanta. The multi-purpose facility hosts the 10-hour Petit Le Mans race that closes out the IMSA schedule and is the final of the four endurance races contested by the series. The track prides itself on a family-friendly atmosphere, with a “Kids 12 &amp; Under Are Always Free” policy.SummaryResponsible for all general building and facility maintenance and upkeep; ensure all facilities are maintained at the highest standard level to provide safe environment for staff, visitors, and the public by performing the following duties.Essential Duties and Responsibilities include the following. Other duties may be assigned.Perform general cleaning, garbage removal/disposal, from restrooms and common areas.Perform general grounds keeping, sweeping, mowing and trimming grass using hand, power or riding mower, trims and edges around common areas, walkways, walls, etc.Performs general manual labor tasks including loading, unloading, lifting, and moving materials.Perform basic and general repair and maintenance on track equipment utilized in grounds keeping (mowers, hand tools, etc.)Perform basic and general repair and maintenance of buildings, facilities and /or equipment as needed.Operate forklift, front loader, or other equipment and/or vehicles, both on and off track and in common areas.Maintain a safe working area.No travel required.QualificationsTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Education and/or ExperienceHigh school diploma or general education degree (GED); or 1-3 years related experience and/or training; or equivalent combination of education and experience.Language SkillsAbility to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.Mathematical SkillsAbility to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.Reasoning AbilityAbility to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.Computer SkillsBasic computer skills.Other Skills and AbilitiesUse of common hand tools to perform basic repair and maintenance on buildings, facilities, and/or equipment. Ability to plan, organize and coordinate multiple projects. Effective time management, organization and multi-tasking skills.Other QualificationsMust be available to work some evenings and/or weekends.Position is safety sensitive and participates in the corporate Substance Abuse Program (SAP).This position drives company owned vehicles, including equipment, golf carts and other company-owned vehicles. Must pass driving record issued by Risk Management.Physical DemandsThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel. The employee is frequently required to stand; walk; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.Apply Now!Learn more about this role and our team by applying at <a href="http://www.careers.nascar.com" target="_blank">www.careers.nascar.com</a> for consideration.We are a company unlike any other. We want you to bring your experience, skills and passion to our close-knit, high-energy environment in which our employees thrive and where you can prosper. We know the key to our success is our employees and we offer highly competitive salaries, a solid benefits package focused on wellness, and opportunities for you to grow and develop both personally and professionally. It won’t take you long to find out that you are on the right track here at NASCAR!NASCAR is committed to fostering a diverse work environment where all employees feel valued and empowered. NASCAR is an Equal Opportunity Employer (EEO). We seek to attract and retain the best qualified people available. All qualified applicants will receive consideration for employment without regard to race, color, gender, gender identity and expression, age, national origin, disability, religion, sexual orientation, genetic information, pregnancy, veteran status or any basis that is protected by applicable law except where a bona fide occupational qualification exists.Follow us on Twitter @NASCARJobs to stay current on all of our openings.

NASCAR

General Maintenance Laborer (Part-time)

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.CompensationThe base hourly rate for this position is $32.02.Position Overview:Day shiftThis position is responsible for communicating and supporting JM core values and delivering the JM experience.The purpose of the Maintenance Technician’s role is to perform routine and non-routine maintenance on production and facility equipment to support production of roofing materials. This position is also responsible for meeting facility targets for safety, productivity, and machine uptime.&nbsp; This role will conduct effective problem solving and troubleshoot processes to develop corrective actions.Responsibilities:&nbsp; <ul><li>Follow all Johns Manville safety and environmental procedures and policies.</li><li>Attend plant safety and training meetings as scheduled.</li><li>Follow Job Safety Analysis (JSA's), uses safe work practices, and reports hazardous conditions at all times. Wear protective clothing &amp; equipment as required.</li><li>Develop JSA’s for new tasks and review JSA’s annually.</li><li>Perform routine and non-routine maintenance activities of mechanical and electrical systems.</li><li>Display advanced working knowledge of electrical (single phase and 3 phase), mechanical, hydraulics, and pneumatics systems.</li><li>Install and repair electrical conduit and cable, including connections, controls, grounding, etc.</li><li>Work from electrical and mechanical schematics to troubleshoot or install new or modify existing equipment.</li><li>Perform voltmeter, ammeter, wattmeter, and other electrical measurements.</li><li>Inspect equipment and reports on defective part and unsatisfactory conditions to further preventative maintenance program.</li><li>Maintain, adjust, service and lubricate equipment keeping it in good operating conditions with respect to proper aligning, functioning and lubrication of parts.</li><li>Participate in continuous improvement and Root Cause Corrective Action (RCCA) teams.</li></ul><ul><li>Assist co-workers as directed.</li><li>Perform and complete other work as assigned by supervisor.</li><li>Provides feedback and solutions to leadership on critical equipment issues pertaining to safety or operational capabilities</li><li>Display flexible outlook toward change management, working on cross-functional teams, training for the use of new tools and methodologies, and willingness and ability to obtain operating knowledge of all production equipment.&nbsp;&nbsp;</li><li>Participate in daily housekeeping efforts.&nbsp; Ensure job site is consistently clean after every job and clean maintenance shop after every shift.</li><li>May be required to perform other related duties as assigned</li></ul>Leadership Responsibilities:<ul><li>There are no supervisory responsibilities for direct reports for this position, but this person must have the skills to interact as a leader with all plant department employees.</li><li>Work with plant supervision to communicate the status of planned jobs, unplanned jobs waiting on parts, or unplanned jobs needing engineering or technical resources</li></ul>Requirements: (education, skills, and abilities)<ul><li>Must be signed off on all Maintenance Technician I job qualifications</li><li>2-5 years multi-craft maintenance experience</li><li>Strong commitment to safety</li><li>Ability to work well with others</li><li>Strong problem-solving capabilities</li><li>Excellent interpersonal and communications skills</li><li>Ability to work effectively in a fast-paced environment</li><li>Intermediate computer skills</li><li>Demonstrated ability to troubleshoot and handle multiple priorities and projects</li><li>Ability to disassemble, diagnose, repair, and perform preventative repair measures on mechanical equipment including, but not limited to: pumps, gearboxes, reducers, couplings, seals, rotating elements, blowers, fans, hydraulic units, valves, chillers, and compressors</li><li>Demonstrate advanced Mechanical aptitude, including pipe fitting, fabricating</li><li>Knowledge of use of hand tools and power tools</li><li>Knowledge of shop machinery, including hydraulic press, mill &amp; drill press, lathe, and saw(s) (band &amp; Chop)</li><li>General knowledge of building lighting systems</li><li>General knowledge of AC/heating systems</li><li>General knowledge of building fire alarm systems</li><li>Advanced knowledge of Lock, Tag, Clear, and Try program</li><li>General knowledge of PLC troubleshooting</li><li>General knowledge of VFD troubleshooting</li><li>Display understanding of 480V system to include arc-flash training and safe working practices per NFPA 70E</li><li>Ability to provide troubleshooting and diagnosis on process heating and cooling equipment</li><li>Ability to consistently make appropriate decisions while being flexible with regard to work assignments and priorities.</li></ul><ul><li>Local travel for training purposes</li></ul>Physical Requirements:The physical requirements of this position are: (these requirements are typical for most of our manufacturing roles)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <ul><li>The ability to stand for extended periods</li><li>The ability to manually lift, push or pull at least 50 pounds safely and with proper body mechanics, sometimes while in awkward positions.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Use of hands (repetitive motion, grabbing, feeling, sensing, pulling)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to work safely in a fast-paced, sometimes stressful work environment</li><li>The ability to safely and effectively work in an often-dusty work environment that experiences a broad range of temperatures (very hot to very cold).&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to withstand the rigors of working a 12(or 8)-hour rotating shift schedule.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to bend, stoop or kneel repetitively.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to reach or work above the shoulder&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li></ul>Incumbent must be physically able to perform essential job functions. Reasonable accommodation may be made to enable individuals with disabilities to perform essential job functions.Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Johns Manville

Maintenance Technician

Job Description:The Adjunct – Electrical position provides quality instruction and maintains a positive learning environment in the classroom, with major emphasis placed on teaching, supporting and evaluating students. The Adjunct role provides instruction and monitors teaching/learning effectiveness in courses assigned by the Department Chair, or other leadership members. The adjunct must exhibit strong organizational skills and the ability to multitask while engaging large groups of people with complicated material.ESSENTIAL JOB FUNCTIONSInstruction &amp; Student Learning<ul><li>Teaches assigned courses as scheduled and assumes primary responsibility for and exercises oversight of the curriculum in conjunction with department policies, ensuring both the rigor of programs and the quality of instruction. Designs curriculum embracing diversity in all forms to foster talent in students while modeling inclusive teaching strategies, with an understanding of the socio-cultural issues of traditionally underrepresented groups. Considers individual differences of students in order to design and support a range of appropriate learning activities. Participates in the identification of students with academic or other needs and responds by utilizing an appropriate resource. Uses technology in a manner appropriate to the nature and objectives of courses and programs and communicates clearly to students the expectations concerning the use of such technology. Keeps accurate and appropriate records in accordance with departmental policies.</li><li>Maintains attendance records, determines and submits grades timely, and in accordance with established policies and procedures of the College, and communicates progress feedback as well as other relevant information to students throughout the semester. Distributes and maintains accurate syllabi that incorporates departmental, college, cross-college, and instructor requirements. Conducts classes punctually and in accordance with the prescribed meeting schedule. Employs appropriate assessment techniques to measure students’ performance in achieving course goals and objectives. Engages in periodic meetings with the department, Lead Instructor, and Chairperson relative to teaching duties and professional development.</li></ul>Student Engagement &amp; Advisement<ul><li>Creates a positive classroom atmosphere that encourages active and collaborative learning, student effort, academic challenge, student and faculty interaction, and support for learners. Maintains posted office hours in accordance with departmental and policies of the College. Uses technology to assist in communication with students. Encourages a sense of community among students for learning both inside and outside the classroom.</li><li>Advises potential or current students within the discipline about the program, career, or transfer options available to assist with degree completion. Refers students to appropriate student and academic support services available at the College or in the community.</li></ul>Culture of Respect<ul><li>Fosters and maintains a safe environment of respect and inclusion for faculty, staff, students, and members of the community.</li></ul>Other duties as required*Regular, predictable, and punctual attendance is required. OTHER DUTIES &amp; RESPONSIBILITIES Attends all required department meetings and training, as requested.MINIMUM EDUCATION AND EXPERIENCE REQUIRED <ul><li>Completion of a Registered Apprenticeship Program specific to the electrical trade OR Five (5) years industry experience at Journey Level. Knowledge of residential/light commercial electrical code preferred.</li><li>State Motor Vehicle Operator's License or demonstrable ability to gain access to work site(s).</li><li>*An appropriate combination of education, training, coursework and experience may qualify a candidate.</li></ul>​KNOWLEDGE, SKILLS, &amp; ABILITIES Knowledge of: installation, repair, and service practices related to residential/light commercial systems; data analysis and application to operational business decisions; online instruction techniques and methods; Microsoft Office; Blackboard; internet research; online communication and record-keeping.Skill in: providing quality instruction; learning technologies and the use multi-media technology to enhance student learning; instructional planning and presentation; incorporating critical thinking, effective communication and other general education outcomes in course content; effective time management; proficiency with online communication record-keeping.Ability to: effectively communicate and use interpersonal skills; create engaging learning environments that respect a wide variety of viewpoints; be sensitive to the needs and concerns of a diverse student population, socio-economic, cultural and ethnic backgrounds and students with disabilities; work independently without ongoing direct supervision; meet deadlines; perform student learning outcomes; maintain confidential and sensitive information, including FERPA.PHYSICAL REQUIREMENTS <ul><li>Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions described in this position description. While performing duties of this job, the employee regularly exhibits digital dexterity when entering data into computer. The employee frequently sits for periods of time, stands, and walks. Employee converses verbally or manually with others in person as well as by telephone. Vision demands include close, relatively detailed vision when focusing on computer screen. Employee occasionally lifts up to 10 pounds.</li></ul>WORKING CONDITIONS <ul><li>Typical office environment. Regular exposure to moderate noise typical to business offices.</li></ul>CSCC has the right to revise this position description at any time. This position description does not represent in any way a contract of employment. Compensation Details: Compensation: $55.88 per contact hourContact Hour: Two hours equals one contact hourHours: Maximum of 12 contact hours per weekFull Time/Part Time:Part time

COLUMBUS STATE COMMUNITY COLLEGE

Adjunct – Electrical (Skilled Trades)

Title: Maintenance Worker-Oak Ridge campus
Employee Classification:&nbsp;Skilled Crafts
Institution:&nbsp;Roane State Community College
Department: Physical Plant
Campus Location: Roane State Community College
Job Summary
The Maintenance Worker will be responsible for performing a variety of maintenance tasks to ensure the safety and overall functionality of college buildings, grounds, and equipment. The ideal candidate will have a strong work ethic, good communication skills, and the ability to work independently or as part of a team in a fast-paced campus environment.
Job Duties
• Responds to and completes work orders for various maintenance projects and requests in a timely manner.
• Performs basic plumbing maintenance, including repairing faucets, unclogging drain lines, rebuilding and replacing plumbing fixtures.
• Performs electrical repairs, including replacing light fixtures, lightbulbs and electrical switches and receptacles.
• Drywall repairs, painting, replacing ceiling tiles as well as carpet and floor tiles.
• Perform routine and preventative maintenance and to assess condition of buildings/systems.
• Assists with indoor and outdoor College event set-up and break-down, including tables, chairs, podiums, risers.
• Mow, weed eat, prune, etc.
• Other duties as assigned.
Minimum Qualifications
• High School Diploma or GED equivalent. • Valid state of Tennessee driver’s license • Must pass a background investigation, including a favorable motor vehicle record and criminal background report. 
Preferred Qualifications
Previous experience as a Maintenance Worker.
Knowledge, Skills, and Abilities
• Excellent customer service skills • Knowledge of basic carpentry, plumbing, and electrical skills. • Ability to use various tools and equipment. • Ability to work in different types of climates including both hot and cold, indoors and outdoors. • Ability to regularly push, pull, lift, move and carry 50-75 pounds. • The ability to be able to work occasional overtime in the evenings as well as nights and weekends to support campus events and/or respond to maintenance and weather issues. • Able to climb and work from ladders and scaffolding. • Knowledge of occupational hazards and safety precautions. 
Physical Demands / Working Conditions
Balancing, climbing, carrying, driving, pulling/pushing, reaching, repetitive movement, sitting, standing, twisting and bending.

Motlow State Community College


      Maintenance Worker-Oak Ridge campus
    

Compensation Type: HourlyCompensation: $26.81Job SummaryThe Maintenance Lead is responsible for leading a team of Maintenance Technicians by assigning and monitoring work assignments, mentoring and training staff, leading by example, exhibiting professionalism, communicating expectations, and developing working relationship with the maintenance team. The Maintenance Lead performs complex tasks related to day-to-day inspections, preventive maintenance and repair of buildings and equipment and stays proficient in various skilled trades.ESSENTIAL JOB FUNCTIONSMaintenance Lead <ul><li>Assists supervisor in assigning and monitoring work assignments by leading a team of Facilities Maintenance Technicians. Mentors, trains, and provides technical expertise to other staff. Trains employees and provides instruction to work teams as needed. Performs complex tasks related to day-to-day inspections, preventive maintenance and repair of buildings and equipment and stays proficient in various skilled trades (i.e., plumbing, carpentry, HVAC, electrical, roofing, etc.).</li><li>Oversees and trains Maintenance Technicians in maintenance, repairs, and projects related to campus facilities in compliance with Work Orders/PM’s and maintenance schedule. Oversees/trains/inspects Maintenance Technicians electrical repairs and motor replacement, lighting ballast and bulbs, electric switches, fuses, circuit breakers, receptacles, minor electric wiring installation and repairs. Performs routine building inspections, creates quotes for (in house) Union labor projects, and demonstrates excellent customer relations skills.</li><li>Identifies, communicates, coordinates, and completes projects and work performed in the assigned area(s). Oversees/trains/inspects building plumbing system, fix water leaks, unclog drains and replace seals and valves. Repairs and replaces sink and floors drains, faucets, and other fixtures.</li><li>Responds to emergency situations and evaluates and corrects defects. Oversees/trains/inspects preventive and repair maintenance duties of heating, ventilating, air conditioning and refrigeration systems (proficient in automation controls). May assist with installing new units or replacement parts for existing units according to specifications and established safety guidelines. (e.g., cleaning or changing filters, lubricating motors, tightening belts, etc.)</li></ul>Maintenance Support<ul><li>Clears walks, stairs, parking lots and roadways of ice and snow. Shovels and applies calcium and salt to areas. Utilizes shovels, snow blowers, tractors, salt spreaders, and trucks for snow removal. Applies salt, calcium, and sand to various areas to melt ice and provide safer conditions. Provides general support in other areas and assists with set-ups during special events.</li><li>Leads by example, exhibits professionalism, communicates expectations, and develops working relationship with entire maintenance team with no bias, prejudice, or favoritism. Assists other trades as needed, adheres to all safety practices and procedures, and cleans and maintains work areas and equipment. Provides a high level of customer service and communicates to customers, coworkers and supervision via written, electronic, and verbal methods and devices.</li></ul>Administration <ul><li>Maintains accurate records of all equipment repairs, maintenance, and expenditures. May review purchase invoices and approve for payment. Makes routine purchases as authorized by management. Enters, fulfills, and submits completed PM’s/Works Orders in an accurate and timely manner.</li></ul>Culture of Respect<ul><li>Fosters and maintains a safe environment of respect and inclusion for faculty, staff, students, and members of the community.</li></ul>Other Duties &amp; Responsibilities:<ul><li>Attends all required department meetings and training.</li><li>Works assigned schedule, exhibits regular and predictable attendance.</li><li>Assist the Police Department during evacuations and emergencies. Assists at off-campus locations with maintenance and supply delivery.</li></ul>Minimum Education and Experience Required:<ul><li>High School Diploma or GED and five (5) years of demonstrable experience working in various trades (i.e., plumbing, carpentry, HVAC, electrical).</li></ul>Licenses and Certifications:<ul><li>State Motor Vehicle Operator's License or demonstrable ability to gain access to work site(s).</li><li>Must be insurable to operate a vehicle as a condition of initial and continued employment.</li></ul>Physical Conditions:<ul><li>Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions described in this position description. While performing duties of this job, the employee regularly exhibits digital dexterity when entering data into computer. The employee frequently sits for periods of time, stands, and walks. Employee converses verbally or manually with others in person as well as by telephone. Vision demands include close, relatively detailed vision when focusing on computer screen. Employee occasionally lifts up to 50 pounds.</li></ul>Working Conditions: <ul><li>Exposure to direct sunlight, rain, and humidity while working outside for extended periods of time. Exposure to noisy vibrating equipment such as blowers, chainsaws, weed eaters, and other power equipment. Exposure to dirt, dust, debris, and odors. May experience minor cuts, burns, or other situations that may cause injury. Occasional risk of electric shock. Employee may be exposed to fumes or airborne particles, toxic, or caustic materials, and blood borne pathogens.</li></ul>CSCC has the right to revise this position description at any time. This position description does not represent in any way a contract of employment.Full Time/Part Time:Full timeUnion (If Applicable):TeamstersScheduled Hours:40Additional InformationIn order to ensure your application is complete, you must complete the following:<ul><li>Please ensure you have all the necessary documents available when starting the application process. For all faculty positions (Instructor, Annually Contracted Faculty, and Adjunct), you will need to upload an unofficial copy of your transcript when completing your aplication. </li><li>Prior to submitting your application, please review and update (if necessary) the information in your candidate profile as it will transfer to your application.</li></ul>If you are a current employee of Columbus State Community College, please log in to Workday to use the internal application process.Thank you for your interest in positions at Columbus State Community College. Once you have applied, the most updated information on the status of your application can be found by visiting your Candidate Home. Please view your submitted applications by logging in and reviewing your status.

Lead Maintenance - Plumbing

Reporting to the Chief Finance Officer in a multi-faceted, multi-location academic and administration setting, this role is responsible for the short/long-range facilities planning, construction, and space utilization programs. The position directs planning and project management for programs and facilities, including budgeting, contractual agreements, procurement, design process, and scheduling. It frequently involves working with consultant architects and engineers and coordinating closely with other campus executives. The role also directs activities in space development and utilization, providing facilities expertise to committees.Additionally, the position is responsible for procurement and vendor management, planning, and operations for all locations, including supply, inventory, distribution, receiving, warehousing, packaging, shipping, transportation, and related operations. It oversees OSHA, fire, and safety programs for each campus, ensuring compliance with all government regulations and environmental, health, and security standards.The role involves working on new campus locations and significant tenant improvements, including collaborating with vendors to complete these improvements. It is responsible for developing strategic goals and objectives for the company and negotiating and implementing contracts, acquisitions, and programs to support these goals. Furthermore, the position includes planning and research for new services, new facilities, and new markets for expansion and growth.Do you want a career that allows you to make a difference in other people’s lives? Discover what it means to truly believe in the work that you do at West Coast University.At West Coast University, we have the privilege of educating students seeking careers in healthcare and guide them through their transformational journey from student to caregiver. Our associates are united behind that purpose and share a deep commitment to our values of teamwork, collegiality, transparency, and a student-centric approach to all we do. This focus creates an aligned, nimble, and consensus-driven culture that is solution-oriented and supports our associates’ professional growth.West Coast University is proud to be an equal opportunity employer. We embrace diversity and are dedicated to creating an inclusive environment for all associates.

West Coast University

Executive Director, Facilities & Asset Management

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.CompensationThe base hourly rate for this position is $33.73.Johns Manville is currently hiring an Industrial Maintenance Mechanic at our Waterville, OH complex. We are searching for individuals who are dependable, responsible, and quality-minded who have a history of working safely in a manufacturing environment.The Waterville, OH location manufactures direct melt products including wet chop glass fibers primarily for specialty applications, glass reinforcements for gypsum wall boards, direct dry chop for plastic reinforcements, single end roving for weavers and plastic reinforcements, and glass mat.The base hourly rate for this position is $33.73.Your Day to Day:<ul><li>Follow all Johns Manville safety procedures and policies, which includes but not limited to LOTO and confined space entry procedures.</li><li>Troubleshooting issues, repair failures of production and facilities equipment, and ensure maximum equipment efficiency in the facility.</li><li>Perform gas cutting, welding, plumbing, and fabrication of equipment.</li><li>Perform preventative and predictive maintenance tasks as well as other precision-based maintenance methods.</li><li>Document work orders, descriptions, parts, and time in computerized maintenance management system</li></ul>What You Bring to Team:<ul><li>High school diploma or GED</li><li>Technical training is preferred (including vocational) and will be considered when looking at overall experience.</li><li>Repair experience with mechanical, pneumatic, hydraulic, and electrical components</li><li>Welding experience and knowledge</li><li>Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals and drawings.</li><li>Must be willing to work any shift (B-12a-8am; C-8am-4pm; D-4pm-12am; X-Swing) OR 12-hour rotating shift.</li><li>Verbal and written communication skills. Ability to write routine reports and correspondence legibly.</li><li>Basic computer skills: Microsoft Office Suite</li><li>Must be able to function within a Team environment effectively, but also maintain being a self-thinker.</li><li>Must be willing to work any shift (B-12a-8am; C-8am-4pm; D-4pm-12am; X-Swing) OR 12-hour rotating shift.</li><li>Valid driver's License</li><li>Must be able to occasionally lift 75 pounds.</li><li>Must be able to work at heights.</li><li>Must have own tools.</li></ul>This Position Offers: <ul><li>Competitive Shift Premium</li><li>Overtime and Double Time Pay (where appropriate)</li><li>Annual Merit Increases</li><li>401k match up to 7%</li><li>11 paid Holidays</li><li>Paid Vacation</li><li>Education reimbursement</li><li>Comprehensive medical, dental and vision plans</li><li>1-year anniversary 1 week of vacation, 2-year anniversary 2 weeks’ vacation</li></ul>Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Industrial Maintenance

<h4>RICHMOND MOTOR SPEEDWAY</h4>Founded in 1946, Richmond Raceway is America’s Premier Short Track. The venue annually hosts two NASCAR race weekends, featuring the NASCAR Cup Series and either NASCAR Xfinity Series or NASCAR Camping World Truck Series, as well as a Whelan Modified Series race on the iconic ¾-mile D-shaped oval. Richmond Raceway is a regional leader for events including sports, live music, and consumer trade shows. The Richmond Raceway Complex’s 1,100 plus acre multipurpose facility hosts more than 200 live events over 280 event days annually, including concerts with top national recording artists at Virginia Credit Union LIVE!, the region’s only covered amphitheater..Richmond Raceway seeks motivated individuals to join our Maintenance team. This is a seasonal position to assist the team in preparing the facility and grounds for events and to maintain and improve the overall condition of the buildings and grounds.General MaintenanceEssential duties and responsibilities include - <ul><li>General building and grounds maintenance and upkeep. Such as cleaning, power washing, garbage removal in buildings and common areas, mowing, weed whipping, tree trimming, landscaping, painting, and event setup.</li><li>Operate hand and power tools, tractors, carts, heavy equipment, and vehicles.</li><li>Other duties as assigned.</li></ul>JanitorialEssential duties and responsibilities include-<ul><li>Cleaning and trash removal of office buildings, houses, suite buildings, etc.</li><li>Cleaning, sanitizing, and stocking restrooms.</li><li>Operate hand and power tools, carts and vehicles.</li><li>Other duties as assigned.</li></ul>Signs/Hospitality Essential duties and responsibilities include-<ul><li>Sign maintenance and installation, vinyl application and installation of large banners.</li><li>Painting ground graphics and walls and buildings.</li><li>Setup and installation of tents, tables, chairs. and other equipment for events.</li><li>Operate forklifts and boom lifts is preferred.</li><li>Operate hand and power tools, tractors, carts, heavy equipment, and vehicles.</li><li>Other duties as assigned.</li></ul>Qualifications/Requirements<ul><li>Valid Driver's License</li><li>Ability to work overtime including some evenings and weekends.</li><li>Ability to work outdoors in all types of weather elements.</li><li>Frequently lifting and carrying objects/material up to 25 lbs. and occasionally up to 50 lbs.</li><li>Ability to work independently as well as in a team setting.</li></ul>Apply Now!Learn more about this role and our team by applying at <a href="http://www.careers.nascar.com" target="_blank">www.careers.nascar.com</a> for consideration.We are a company unlike any other. We want you to bring your experience, skills and passion to our close-knit, high-energy environment in which our employees thrive and where you can prosper. We know the key to our success is our employees and we offer highly competitive salaries, a solid benefits package focused on wellness, and opportunities for you to grow and develop both personally and professionally. It won’t take you long to find out that you are on the right track here at NASCAR!NASCAR is committed to fostering a diverse work environment where all employees feel valued and empowered. NASCAR is an Equal Opportunity Employer (EEO). We seek to attract and retain the best qualified people available. All qualified applicants will receive consideration for employment without regard to race, color, gender, gender identity and expression, age, national origin, disability, religion, sexual orientation, genetic information, pregnancy, veteran status or any basis that is protected by applicable law except where a bona fide occupational qualification exists.Follow us on Twitter @NASCARJobs to stay current on all of our openings.

Maintenance Event Staff - Richmond Raceway

<h4>Automation Maintenance Technician (All Levels)</h4>Time type: full timePosted on: March 31, 2025Job requisition id: R4709What we needSymbotic is seeking an Automation MaintenanceTechnician at all levels. As a Maintenance Technician you will be responsible forrepairing and calibrating our automated and robotic systems. These systems are Symbotic’sautomated adapters, vertical lifts, and Symbotic’s fleet of automated robotic vehicles.&nbsp;You will be responsible for system upkeep and operations of automated adapters used to interface with the Symbotic structure.As the Maintenance Technician you will become the system expert including all mechanical, PLC, electrical or electronic subsystems.What we do&nbsp;Our Automation Maintenance Technician team is part of the Customer Operations organization which is responsible for leading the day-to-day operations of Symbotic’s robotic material handling system. The Customer Operations organization drives operational excellence by engaging and partnering with our onsite customers to drive best-in-class quality, safety and system performance.What you’ll do<ul><li>Perform inspections on systems associated with Automated Storage and Retrieval System of automated robotic vehicles and Automated Adapters/ Lifts.</li></ul><ul><li>Lead continuous operation by adjusting, calibrating, repairing, replacing or modifying system components.</li></ul><ul><li>Process and monitor the flow of the automated storage and retrieval system, through means of the adapters, including manual inbound, automatic inbound, automatic outbound, to achieve maximum throughput and cases per hour.</li></ul><ul><li>Troubleshoot automated robotic vehicle anomalies and stoppages using schematic and wiring diagrams as well as advanced test equipment.</li></ul><ul><li>Perform periodic system inspections within expected durations on all equipment and thoroughly document all actions and repairs to include parts used and labor. Ensure quality maintenance and complete documentation via the Computerized Maintenance Management System (CMMS).</li></ul><ul><li>Effective communication of production impacting problems and suggested actions, including approximate time required for corrective and emergency maintenance to required team members.</li></ul><ul><li>Must be able to work in a dynamic environment and change course based on immediate business needs.</li></ul><ul><li>Cleanup of equipment and removal of replaced parts from work areas after repairs are completed.</li></ul><ul><li>Responsible for automated robotic vehicle recovery in the Symbotic Matrix select system to include working in restrictive environments.</li></ul><ul><li>Responsible for minor utility work such as machining holes, brackets; cutting steel; aligning sensors; attaching Unistrut; etc.).</li></ul><ul><li>Responsible for troubleshooting, calibration, set up, and tool changes on Robotic arms.</li></ul><ul><li>Responsible for continuous cleaning and adhering to 5S policies.</li></ul><ul><li>Perform Cell Operator functions as needed.</li></ul><ul><li>Other duties as assigned by leadership.</li></ul>What you’ll need&nbsp;<ul><li>Associate degree and/or certification in electronics, automotive, automation, manufacturing or equivalent work experience preferred.&nbsp;</li></ul><ul><li>A minimum of 3 years of experience with mechanical automation systems or educational/training equivalent</li></ul><ul><li>Manage and lead advanced troubleshooting skills and ability to follow electro-mechanical diagrams.</li></ul><ul><li>Must be able to operate and run Automated systems</li></ul><ul><li>Experience with PLC (Programmable Logic Controller) knowledge and troubleshooting.</li></ul><ul><li>Advanced troubleshooting skills and ability to follow electro-mechanical diagrams.</li></ul><ul><li>Proficient in performing all Inspection functions.</li></ul><ul><li>Ability to work independently of supervisor following procedures and manuals.</li></ul>Our Environment&nbsp;<ul><li>There will be steep stairs to climb into the structure.&nbsp;&nbsp;</li></ul><ul><li>You will regularly be near railings that are high off the ground.&nbsp;&nbsp;</li></ul><ul><li>Subject to environmental conditions, protection from weather conditions but not necessarily temperature changes. Must be capable of working in temperatures ranging from 105° to 32° Fahrenheit.&nbsp;&nbsp;</li></ul><ul><li>If the site location is in construction, you will be required to wear proper PPE (hard hat, safety vest, steel toes, eyeglasses, ear protection, fall protection (e.g., safety harness).</li></ul><ul><li>Frequent ability to safely and efficiently lift items weighing up to 50lbs and move items weighing up to 80lbs.&nbsp;</li></ul><ul><li>Stand/walk for up to 10-12 hours and is frequentlyrequired to walk and reach with hands and arms.&nbsp;&nbsp;</li></ul><ul><li>The employee is routinely required to work at heights of up to 45 feet and within restrictive areas of 24 inches. to stand; climb or balance and stoop, kneel, crouch, or crawl.&nbsp;&nbsp;</li></ul><ul><li>Must be capable of occasional and/or continuous feeling, seeing, hearing, bending, twisting, stooping, pushing, pulling, balancing, gripping, climbing, crawling, sitting, handling objects, and repetitive movement using both hands and feet. Must comply with all safety requirements and protocols, including without limitation Lock out tag out safety protocols and fall protection safety protocols.&nbsp;</li></ul>The base range for this position in Tolleson, AZ is $22.00 - 24.00 per hour; however, base pay offered may vary depending on job-related knowledge, skills, and experience. The compensation package includes medical, dental, vision, disability, 401K, PTO and/or other benefits.&nbsp;#LI-BB1#LI-Onsite Apply Now

Symbotic

Automation Maintenance Technician (All Levels)

<h4>KANSAS SPEEDWAY</h4>Kansas Speedway, which opened in 2001, is located in the heart of the Midwest in Kansas City, Kansas. With easy access to major highways, along with the Hollywood Casino at Kansas Speedway, restaurants, shopping and other entertainment, Kansas Speedway has easily become a destination for fans. The track hosts two NASCAR Cup Series races, the NASCAR Xfinity Series, the NASCAR Gander RV and Outdoors Truck Series and the ARCA Menards Series. In addition to two race weekends, Kansas Speedway hosts over 200 event days each year.Kansas Speedway seeks motivated individuals to join our Maintenance team. This is a seasonal position to assist the team in preparing the facility and grounds for events and to maintain and improve the overall condition of the buildings and grounds.General MaintenanceEssential duties and responsibilities include - <ul><li>General building and grounds maintenance and upkeep. Such as cleaning, power washing, garbage removal in buildings and common areas, mowing, weed whipping, tree trimming, landscaping, painting, and event setup.</li><li>Operate hand and power tools, tractors, carts, heavy equipment, and vehicles.</li><li>Other duties as assigned.</li></ul>JanitorialEssential duties and responsibilities include-<ul><li>Cleaning and trash removal of office buildings, houses, suite buildings, etc.</li><li>Cleaning, sanitizing, and stocking restrooms.</li><li>Operate hand and power tools, carts and vehicles.</li><li>Other duties as assigned.</li></ul>Signs/Hospitality Essential duties and responsibilities include-<ul><li>Sign maintenance and installation, vinyl application and installation of large banners.</li><li>Painting ground graphics and walls and buildings.</li><li>Setup and installation of tents, tables, chairs. and other equipment for events.</li><li>Operate forklifts and boom lifts is preferred.</li><li>Operate hand and power tools, tractors, carts, heavy equipment, and vehicles.</li><li>Other duties as assigned.</li></ul>Qualifications/Requirements<ul><li>Valid Driver's License</li><li>Ability to work overtime including some evenings and weekends.</li><li>Ability to work outdoors in all types of weather elements.</li><li>Frequently lifting and carrying objects/material up to 25 lbs. and occasionally up to 50 lbs.</li><li>Ability to work independently as well as in a team setting.</li><li>Reliable transportation to and from the track location.</li></ul>Apply Now!Learn more about this role and our team by applying at <a href="http://www.careers.nascar.com" target="_blank">www.careers.nascar.com</a> for consideration.We are a company unlike any other. We want you to bring your experience, skills and passion to our close-knit, high-energy environment in which our employees thrive and where you can prosper. We know the key to our success is our employees and we offer highly competitive salaries, a solid benefits package focused on wellness, and opportunities for you to grow and develop both personally and professionally. It won’t take you long to find out that you are on the right track here at NASCAR!NASCAR is committed to fostering a diverse work environment where all employees feel valued and empowered. NASCAR is an Equal Opportunity Employer (EEO). We seek to attract and retain the best qualified people available. All qualified applicants will receive consideration for employment without regard to race, color, gender, gender identity and expression, age, national origin, disability, religion, sexual orientation, genetic information, pregnancy, veteran status or any basis that is protected by applicable law except where a bona fide occupational qualification exists.Follow us on Twitter @NASCARJobs to stay current on all of our openings.

768 Facilities and Maintenance Jobs