field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

POSITION SUMMARY: Under the supervision of the Vice President for Administration and Finance, the Director of Faculties and Engineering is responsible for the comprehensive leadership and management of facilities operations across a 600,000-square-foot campus, spread across two locations in Holyoke, MA. This includes overseeing maintenance, capital projects, and renovations to address aging infrastructure.&nbsp; &nbsp;The position requires expertise in unionized environments (AFSCME) and ensures compliance with state and federal regulations. The Director of Faculties and Engineering will drive operational excellence while supporting the institution's mission through strategic planning, fiscal management, and sustainability initiatives.&nbsp; &nbsp;The Director is also responsible for ensuring that the college meets the safety standards and guidelines as determined by the City and Department of Capital Asset Management and Maintenance (DCAMM). The Director is responsible for preparation of project studies, plans, specifications and contracts for repairs, renovations and new construction at Holyoke Community College.&nbsp;Facilities Operations and Maintenance<ul><li>Supervises and coordinates the preparation of budgets for Facilities.&nbsp;</li><li>Oversee the maintenance and repair of campus buildings, grounds, and infrastructure, prioritizing aging systems and infrastructure needs.&nbsp;</li><li>Manage preventative maintenance programs to ensure system reliability and extend asset lifespans.&nbsp;</li><li>Ensure all facilities operate efficiently, including HVAC, electrical, plumbing, mechanical systems and all other trades.&nbsp;</li><li>Directs the maintenance and repair of all infrastructure and buildings and structures, including painting, carpentry, roofing, electrical work, plumbing, steam fitting, ventilation, refrigeration controls, fire and life safety systems, masonry, walls and floors and any equipment related to same.&nbsp;</li></ul>Capital Projects and Renovations<ul><li>Plan, coordinate, and oversee capital improvement projects and major renovations, including budget management and adherence to timelines.&nbsp;</li><li>Collaborate with stakeholders to define project goals, monitor progress, and ensure quality outcomes.&nbsp;</li><li>Liaise with state agencies like the Department of Capital Asset Maintenance and Management (DCAMM) and contractors to ensure compliance with Massachusetts building codes and regulations.&nbsp;</li></ul>Workforce Management<ul><li>Effectively manage AFSCME unionized staff, ensuring compliance with collective bargaining agreements and fostering positive labor relations.&nbsp;</li><li>Supervise and support a diverse team, including custodial, maintenance, and administrative personnel, promoting professional development and accountability.&nbsp;</li></ul>Regulatory Compliance and Safety<ul><li>Maintain compliance with Commonwealth of Massachusetts building codes, environmental laws, and safety standards.&nbsp;</li><li>Working with other departments on campus develop and implement emergency response plans related to facilities, including disaster recovery protocols.&nbsp;</li></ul>Strategic and Fiscal Leadership<ul><li>Develop and oversee facilities budgets, including operational, utilities, and capital project expenditures.&nbsp;</li><li>Identify cost-saving opportunities and recommend strategies to optimize resource allocation.&nbsp;</li><li>Contribute to long-term campus planning efforts, with a focus on modernizing and improving infrastructure.&nbsp;</li><li>Participates in a variety of interdepartmental working groups addressing both capital and long-range planning, projects and issues on campus.&nbsp;</li></ul>Sustainability and Efficiency Initiatives<ul><li>Lead efforts to enhance campus sustainability through energy conservation, waste reduction, and environmentally responsible construction practices.&nbsp;</li><li>Monitor and improve energy management systems and utilities usage.&nbsp;</li></ul> Vendor and Contractor Management&nbsp;<ul><li>Negotiate and oversee contracts with external vendors and service providers, ensuring adherence to institutional standards.&nbsp;</li><li>Monitor project performance, resolving issues to maintain project schedules and budgets.&nbsp;</li></ul>Performs special projects and related responsibilities as initiated and requested and performs other related duties as assigned.MINIMUM QUALIFICATIONS: <ul><li>Bachelor’s degree in engineering. Licensed in the Commonwealth of Massachusetts as a construction supervisor.&nbsp;</li><li>Minimum of 5 years of full-time experience in similar capacity.&nbsp;</li><li>Ability to plan, organize, direct and coordinate engineering&nbsp;</li><li>Experience with computer energy management systems, facilities management systems, spreadsheets and work order systems. Must be computer literate.&nbsp;</li><li>Demonstrated knowledge of physical plant operation and maintenance, management skills required.&nbsp;</li><li>Experience in supervising unionized staff, preferably in an academic environment.&nbsp;</li><li>Ability to establish and maintain effective working relationships with subordinates, superiors, associates and the public.&nbsp;</li><li>Ability to manage, supervise and coordinate the work of architects, engineers and contractors.&nbsp;</li><li>Skill in writing clear and concise reports.</li></ul> PREFERRED QUALIFICATIONS: <ul><li>Certifications such as LEED are highly desirable.&nbsp;</li><li>Experience working in public higher education or state-funded institutions.</li></ul> EQUIVALENCY STATEMENT: Applicants who do not meet the required qualifications as stated above are encouraged to put in writing precisely how their background and experience have prepared them for the responsibilities of this position. SUPERVISORY RESPONSIBILITIES: <ul><li>Directly supervises the activities and performance of Power Plant Manager, Supervisor of Custodial Services, Trades Supervisor, administrative support and architects and engineers in the preparation of plans and specifications for all construction projects on campus.&nbsp;</li><li>Manages and supervises the work of all contractors providing construction services for renovation projects.&nbsp;</li><li>Carries out supervisory responsibilities in accordance with Holyoke’s policies and applicable laws.&nbsp;</li><li>Responsibilities include planning, assigning, and directing work by architects and contractors; appraising performance of contractors; and addressing complaints and resolving problems.&nbsp;</li><li>Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems.</li></ul> WORKING CONDITIONS: <ul><li>On-site presence required; occasional work outside standard hours for emergencies.&nbsp;</li><li>Exposure to construction sites, mechanical spaces, and outdoor environments.</li></ul> Full-time, Non-Unit Professional positionSalary range:&nbsp;$112,237 - $123,918 (Grade 9); plus a comprehensive State benefits package. &nbsp; Funding Source: StateHours: &nbsp;37.5 hours/week

Holyoke Community College

Director of Facilities and Engineering

Job Description:The Adjunct – Carpentry position provides quality instruction and maintains a positive learning environment in the classroom, with major emphasis placed on teaching, supporting and evaluating students. The Adjunct role provides instruction and monitors teaching/learning effectiveness in courses assigned by the Department Chair, or other leadership members. The adjunct must exhibit strong organizational skills and the ability to multitask while engaging large groups of people with complicated material.ESSENTIAL JOB FUNCTIONS Instruction &amp; Student Learning <ul><li>Teaches assigned courses as scheduled and assumes primary responsibility for and exercises oversight of the curriculum in conjunction with department policies, ensuring both the rigor of programs and the quality of instruction. Designs curriculum embracing diversity in all forms to foster talent in students while modeling inclusive teaching strategies, with an understanding of the socio-cultural issues of traditionally underrepresented groups. Considers individual differences of students in order to design and support a range of appropriate learning activities. Participates in the identification of students with academic or other needs and responds by utilizing an appropriate resource. Uses technology in a manner appropriate to the nature and objectives of courses and programs and communicates clearly to students the expectations concerning the use of such technology. Keeps accurate and appropriate records in accordance with departmental policies.</li><li>Maintains attendance records, determines and submits grades timely, and in accordance with established policies and procedures of the College, and communicates progress feedback as well as other relevant information to students throughout the semester. Distributes and maintain accurate syllabi that incorporates departmental, college, cross-college, and instructor requirements. Conducts classes punctually and in accordance with the prescribed meeting schedule. Employs appropriate assessment techniques to measure students’ performance in achieving course goals and objectives. Engages in periodic meetings with the department, Lead Instructor, and Chairperson relative to teaching duties and professional development.</li></ul>Student Engagement &amp; Advisement<ul><li>Creates a positive classroom atmosphere that encourages active and collaborative learning, student effort, academic challenge, student and faculty interaction, and support for learners. Maintains posted office hours in accordance with departmental and policies of the College. Uses technology to assist in communication with students. Encourages a sense of community among students for learning both inside and outside the classroom.</li><li>Advises potential or current students within the discipline about the program, career, or transfer options available to assist with degree completion. Refers students to appropriate student and academic support services available at the College or in the community.</li></ul>Culture of Respect <ul><li>Fosters and maintains a safe environment of respect and inclusion for faculty, staff, students, and members of the community.</li></ul>*Regular, predictable, and punctual attendance is required.OTHER DUTIES &amp; RESPONSIBILITIES <ul><li>Attend department meetings and required trainings, as requested</li></ul>MINIMUM EDUCATION AND EXPERIENCE REQUIRED <ul><li>Completion of a Registered Apprenticeship Program specific to the carpentry trade; OR Five (5) years industry experience at Journey Level. Knowledge of residential/light commercial carpentry code preferred.</li><li>State Motor Vehicle Operator's License or demonstrable ability to gain access to work site(s).</li><li>*An appropriate combination of education, training, coursework, and experience may qualify a candidate.</li></ul>KNOWLEDGE, SKILLS, &amp; ABILITIES Knowledge of: construction, repair, and service practices related to residential/light commercial systems; data analysis and application to operational business decisions; online instruction techniques and methods; Microsoft Office; Blackboard; internet research; online communication and record-keeping. Skill in: providing quality instruction; learning technologies and the use multi-media technology to enhance student learning; instructional planning and presentation; incorporating critical thinking, effective communication and other general education outcomes in course content; effective time management; proficiency with online communication record-keeping. Ability to: effectively communicate and use interpersonal skills; create engaging learning environments that respect a wide variety of viewpoints; be sensitive to the needs and concerns of a diverse student population, socio-economic, cultural and ethnic backgrounds and students with disabilities; work independently without ongoing direct supervision; meet deadlines; perform student learning outcomes; maintain confidential and sensitive information, including FERPA. PHYSICAL REQUIREMENT <ul><li>Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions described in this position description. While performing duties of this job, the employee regularly exhibits digital dexterity when entering data into computer. The employee frequently sits for periods of time, stands, and walks. Employee converses verbally or manually with others in person as well as by telephone. Vision demands include close, relatively detailed vision when focusing on a computer screen. Employee occasionally lifts up to 10 pounds. </li></ul>WORKING CONDITIONS <ul><li>Typical office and classroom/lab environment. </li></ul>CSCC has the right to revise this position description at any time. This position description does not represent in any way a contract of employment. Compensation Details: Compensation: $55.88 per contact hourContact Hour: Two hours equals one contact hourHours: Maximum of 12 contact hours per weekFull Time/Part Time:Part time

COLUMBUS STATE COMMUNITY COLLEGE

Adjunct – Carpentry (Skilled Trades)

Sprague is passionate about delivering diverse products and programs that warm, power and move the world. We keep homes warm through Northeastern winters and hospitals cool through summer. We help small businesses focus on serving their communities, and our renewable fuels keep our country’s infrastructure running. From importing wind energy components to deploying leading-edge solar technology to help power terminal facilities, we are committed to continually evolving to meet our customers’ changing energy needs.Are you ready to join a dynamic team and contribute to the energy solutions of tomorrow? We are currently seeking an experienced Service Technician with a minimum of five years’ experience servicing and maintaining heating equipment. &nbsp;As part of our team, you will be responsible for troubleshooting, diagnosing, repairing, and servicing gas and oil burner equipment, controls, piping and wiring at our customer locations throughout the New York Metropolitan area.Experience/Qualifications:<ul><li>Proficient in servicing, repairing, maintaining, and troubleshooting #2 and #4 oil burners.</li><li>Demonstrated expertise in commercial and industrial heating installations.</li><li>Skilled in starting up, diagnosing, and rectifying all equipment defects.</li><li>Proficient in reading and comprehending wiring diagrams.</li><li>Capable of adjusting and fine-tuning equipment for optimal efficiency.</li><li>Possess excellent communication and interpersonal skills.</li><li>Hold a valid and clean driver’s license, adept at navigating the New York Metropolitan area.</li><li>Willing and able to obtain a TWIC (Transportation Worker Identification Card).</li><li>Flexible for overtime and weekend work as required.</li><li>High School Diploma or GED.</li></ul>Benefits:<ul><li>Competitive pay</li><li>Local 32BJ union (retirement plan and Anthem health insurance)</li><li>Life insurance, PTO,</li><li>Assigned take home van.</li></ul>&nbsp;&nbsp;Physical activity/strength requirements are demanding and may include:<ul><li>Frequent standing, walking, and squatting</li><li>Occasional bending, stooping, climbing (stairs, ladders, slopes), crawling, kneeling, sitting, twisting, and balancing</li><li>Frequent lifting/carrying up to 50 lbs., occasional lifting/carrying over 100 lbs.</li><li>Occasional pushing/pulling over 100 lbs.</li></ul>Come join us to learn why we are consistently celebrating 20-, 30-, and even 40-year anniversaries here at Sprague!&nbsp;The rate for this position is $34.00 to $47.80 per hour, based on experience.Sprague is an EEO/AA employer.&nbsp; We strongly encourage minorities, females, Vets and individuals with disabilities to apply.As a federal contractor we adhere to OFCCP employment regulations.Click here for OFCCP compliance information

Sprague

Sprague Resources GP LLC

Service Technician

Company Description About Veolia North America A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description BENEFITS Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Position Purpose: Provides day-to-day monitoring and basic plant and pump/booster station operations, routine lab tests and basic corrective and preventative maintenance activities. Primary Duties/Responsibilities: <ul><li>Operates equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures. Monitors and observes operating conditions, records observations and data in shift log. Diagnoses basic operational problems and takes corrective action per procedure.</li><li>Performs routine CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment which may include pumps, engines, centrifuges, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed, odor control, disinfection equipment, vacuum filters and belt presses. Reports and documents results of work performed and enters into appropriate database. Promptly reports any operational problems with machines or equipment to Lead or Supervisor.</li><li>Collects water, wastewater, industrial waste, groundwater, sludge, residuals and/or gas samples according to schedule. Performs field tests (chemical, physical and biological) in order to pace chemical dosages for process and odor control units. Prepares chemical solutions, monitors supplies and recommends reorder.</li><li>Performs routine lab tests and prepares reports per procedure.</li><li>Performs routine instrument calibration for portable meters including, but not limited to, dissolved oxygen, pH, H2S, percent oxygen, lower explosive limit. </li><li>Learns to inspect and becomes proficient at mechanical troubleshooting to determine repairs needed. Dismantles equipment to gain access to and repairs defective parts using hand tools, power tools and precision measuring and testing devices. Re-assembles and tests equipment ensuring safe and efficient operating condition is restored. Learns to troubleshoot hydraulic, pneumatic and electronic equipment and instrumentation.</li><li>Performs manual labor including cleaning equipment, facilities and grounds as required and properly disposes of waste according to safety and environmental policies. Operates vehicles, mobile equipment and material handling equipment for operational and maintenance purposes.</li><li>Performs facility maintenance and repair and may replace or install light bulbs, fluorescent tubes, damaged glass, windows, doors, partitions, ceiling or floor tiles, door locks, carpet, and/or paint.</li><li>Learns to estimate time and material costs for various projects. May assist in other areas of facility as directed. </li></ul> Work Environment: <ul><li>Spends 100% of the time in operations environment. </li><li>Typically spends 25 - 35% of time exposed to outdoor and sometimes inclement weather. </li><li>Company service vehicles are used as required.</li><li>Travels 1 - 2 times per year for company provided training. </li><li>May be required to travel up to five consecutive days. </li><li>May serve rotational 24-hour emergency on-call.</li><li> Possible Work Hazards : May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards.</li></ul> Qualifications Education/Experience/Background: <ul><li>High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions.</li><li>Six months to two years of experience in a related position with experience in a similar environment preferred with ability to comprehend specifications, blueprints and manuals.</li><li>Experience using material handling equipment, pressure gauges and precision measuring instruments.</li><li>Experience using power, pneumatic, hydraulic and hand tools and shop tools such as drill press, band saw, bench grinder, torque wrench preferred.</li></ul> Knowledge/Skills/Abilities: <ul><li>Ability to perform basic mathematical calculations.</li><li>Some vocational training and mechanical aptitude preferred, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment.</li><li>Must have the ability to diagnose basic and routine process and mechanical problems and take remedial corrective action. </li><li>Must have basic computer skills and have ability to operate programs for process control, the Computer Maintenance Management System, and laboratory/industrial pretreatment QA/QC.</li><li>Must consistently demonstrate the ability to learn and independently perform assigned duties and meet or exceed production and quality goals.</li><li>Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily.</li><li>Must be able to serve rotational 24-hour emergency on-call if required by site.</li></ul> Required Certification/Licenses/Training: <ul><li>Minimum water/wastewater license as required by regulatory agency at site.</li><li>Must possess a valid driver's license and a safe driving record.</li><li>Employee Orientation, Departmental Operating Procedures, Safety, OSHA and Quality Training.</li><li>HAZWOPER (Hazardous Waste Operations and Emergency Response) Level I and II First Responder Certification if required by site. Obtain and maintain minimum water / wastewater operator state certification.</li><li>Must become proficient in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, gas detectors, confined space equipment, etc.)</li><li>Forklift Certification if required by site.</li><li>Training in operation of mechanical drives, hydraulic pumps and valves, pneumatics, electronics and control systems. </li><li>Obtain HVAC, Electrician, Plumber's or other trade License if assigned to that area. </li><li> Note : Tech will not perform duties unless properly licensed.</li><li>Training in the use of energy management systems as needed.</li><li>Works toward increasing skills in additional functional areas or in obtaining advanced skills / maintenance certifications. </li><li>May perform more advanced functions as part of training and development.</li></ul> Physical Requirements: <ul><li>Amount of time spent - Standing 25%, Walking 75% for as many as five miles per shift.</li><li>Requires close visual and hearing observation to detect non-conformance and machine malfunction.</li><li>Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms. </li><li>Works in various positions; works on ladders, catwalks, and supports at heights of 50 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds. </li><li>Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 10 feet. </li><li>Occasional stooping, bending or kneeling and entering confined spaces.</li></ul> Additional Information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Plant Maintenance & Operations Tech. I

Position SummaryManages the maintenance, repair, and refurbishment operations of one or more facilities. Implements policies and procedures that ensure the optimal functioning of buildings, grounds, and associated equipment. Monitors daily building operations of all systems, including mechanical, electrical, plumbing, HVAC, safety, and waste management to ensure reliability. Tracks work orders for quality, adherence to service standards, and budgeted guidelines. Oversees the work performed by vendors or contractors engaged for the purpose of maintaining the building systems. Handles accounts payable for all areas of need, including building operations and services.Schedule: Monday through Friday, 20 hours per weekKey Duties and ResponsibilitiesThe key duties and responsibilities of the Facilities Manager include, but are not limited to:<ul><li>Planning and coordinating routine maintenance, repairs, and replacements for building systems. Including HVAC, plumbing, electrical, and lighting.</li><li>Handyman tasks.</li><li>Works with the facility engineer to make sure building grounds and systems are routinely inspected for safety hazards, maintenance needs, and code violations.</li><li>Creates and tracks service tickets for engineer and building vendors</li><li>Negotiates contracts with external vendors alongside senior leadership.</li><li>Develop emergency response plans and schedule annual drills.</li><li>Review coding of invoices by care centers and LLCs for consistency across the company and compliance with policies and procedures.</li><li>Verify bills are approved before paying.</li><li>Post invoices into computer system, research items as needed. </li><li>Filing.</li><li>Communicate accurate and pertinent information to Proliance physicians, employees, and vendors as necessary.</li><li>Work with care centers to resolve A/P issues, as necessary. </li><li>Research vendor statements: work with vendors to reconcile statements/invoices, as necessary.</li><li>Assist with other projects designated by management.</li><li>Become subject matter expert in assigned tasks.</li></ul>Education/Experience<ul><li>3+ years Healthcare industry (hospital or ambulatory surgery center / ASC) experience</li><li>1+ years of general building and facilities management</li><li>1+ years of high volume, full-cycle A/P experience as plus</li><li>Experience with Excel</li></ul>Knowledge, Skills and Abilities<ul><li>Oversee contractors to ensure quality, timeliness, and compliance with standards.</li><li>Implement strategies to optimize energy usage and reduce costs.</li><li>Coordinate and manage regular facility maintenance to ensure operational efficiency.</li><li>Oversee day-to-day operations of the facility, ensuring safety and functionality.</li><li>Develop and execute preventive maintenance schedules to minimize downtime.</li><li>Optimize facility space to meet current and future needs.</li><li>Prioritize and schedule work orders to ensure timely completion with minimal disruption.</li><li>Experience using AvidXchange or Intacct a plus. </li><li>Proficiency in MSOffice and Adobe applications preferred.</li><li>Experience using Excel for compiling, tracking, importing, and validating data.</li><li>General knowledge of accounting and understanding of general ledger accounts.</li><li>Excellent problem-solving skills and professional judgement.</li><li>Basic data entry; 10-key proficiency.</li><li>Excellent phone etiquette and ability to communicate effectively.&nbsp; </li><li>Ability to maintain composure in stressful situations.</li><li>Ability to sit for long periods of time.</li><li>Must maintain an appropriate standard of confidentiality.</li><li>Ability to work independently, with little supervision – including remote work.</li><li>Excellent public relations skills - patient, pleasant, and diplomatic attitude.</li><li>Willingness and ability to learn unfamiliar tasks and technology solutions.</li><li>Comfortable in a fast-paced and changing environment.</li><li>Highly Organized and collaborative.</li><li>Professional and Dependable.</li></ul>Work Environment/Physical DemandsThe work environment/physical demands described here are representative of those that must be met by a teammate to successfully perform the essential functions of this job.&nbsp; Reasonable accommodations may be made to enable differently abled persons to perform the essential functions.

Proliance Surgeons

Facilities Manager - surgery center (part-time)

<h4>Automation Maintenance Technician</h4>Time type: full timePosted on: April 25, 2025Job requisition id: R4810What we needThe Automation Maintenance Technician will repair and calibrate our automated and robotic systems. These systems are Symbotic’s Automated Adapters, Vertical Lifts, and Symbotic’s fleet of automated robotic vehicles. An Automation Maintenance Technician will become the system expert of Symbotic’s automation, including all mechanical, PLC, electrical or electronic subsystems.&nbsp; You will also be responsible for system upkeep and operations of automated adapters used to interface with the Symbotic structure.What we doThe Automation Maintenance Technician I is part of the Customer Operations organization which is responsible for leading the day-to-day operations of Symbotic’s robotic material handling system. The Customer Operations organization drives operational excellence by engaging and partnering with our onsite customers to drive best-in-class quality, safety and system performance.What you’ll do<ul><li>Ensure that the safety commitments in compliance with OSHA, Symbotic, and our customers’ processes and procedures are met daily.</li></ul><ul><li>Perform inspections on systems associated with Automated Storage and Retrieval System of automated robotic vehicles and Automated Adapters/ Lifts.</li></ul><ul><li>Support continuous operation by adjusting, calibrating, repairing, replacing or modifying system components.</li></ul><ul><li>Process and monitor the flow of the automated storage and retrieval system, through means of the adapters, including manual inbound, automatic inbound, automatic outbound, to achieve maximum throughput and cases per hour.</li></ul><ul><li>Troubleshoot automated robotic vehicle anomalies and stoppages using schematic and wiring diagrams as well as advanced test equipment.</li></ul><ul><li>PLC (Programmable Logic Controller) knowledge and troubleshooting.</li></ul><ul><li>Advanced troubleshooting skills and ability to follow electro-mechanical diagrams.</li></ul><ul><li>Perform periodic system inspections within expected durations on all equipment and thoroughly document all actions and repairs to include parts used and labor. Ensure quality maintenance and complete documentation via the Computerized Maintenance Management System (CMMS).</li></ul><ul><li>Effective communication of production impacting problems and suggested actions, including approximate time required for corrective and emergency maintenance to required team members.</li></ul><ul><li>Must be able to operate and run Automated systems.</li></ul><ul><li>Must be able to work in a dynamic environment and change course based on immediate business needs.</li></ul><ul><li>Responsible for cleanup of equipment and removal of replaced parts from work areas after repairs are completed.</li></ul><ul><li>Responsible for automated robotic vehicle recovery in the Symbotic Matrix select system to include working in restrictive environments.</li></ul><ul><li>Responsible for minor utility work such as machining holes, brackets; cutting steel; aligning sensors; attaching Unistrut; etc.).</li></ul><ul><li>Responsible for troubleshooting, calibration, set up, and tool changes on Robotic arms.</li></ul><ul><li>Responsible for continuous cleaning and adhering to 5S policies.</li></ul><ul><li>Perform Cell Operator functions as needed.</li></ul><ul><li>Other duties as assigned by leadership.</li></ul>What you’ll need<ul><li>Associate degree or equivalent experience/certification in electronics, automotive, automation, manufacturing or equivalent field preferred.</li></ul><ul><li>Minimum of 1 year of experience with mechanical automation systems or educational/training equivalent.</li></ul><ul><li>Strong electro-mechanical skills.</li></ul><ul><li>Ability to maintain required productivity/work expectations.</li></ul><ul><li>Ability to work independent of supervisor following procedures and manuals.</li></ul><ul><li>Ability to Multi-task and perform multiple job functions at once.</li></ul><ul><li>Demonstrates commitment and ability to work safely.&nbsp;</li></ul><ul><li>Reliable and maintains satisfactory attendance.&nbsp;</li></ul><ul><li>Be proficient in performing all Inspection functions.</li></ul><ul><li>Produce quality work.</li></ul><ul><li>A high sense of urgency.</li></ul><ul><li>Must be literate, written and verbal, in English Language.</li></ul>Our Environment<ul><li>Approximately 75% of time will be spent on a construction site with PPE required (hard hat, safety vest, steel toes, eyeglasses, ear protection, fall protection (e.g., safety harness)&nbsp;</li></ul><ul><li>There will be steep stairs to climb into the structure. You may be required to routinely walk up and down stairs to navigate the automation structure.</li></ul><ul><li>You will regularly be near railings that are high off the ground&nbsp;</li></ul><ul><li>Subject to environmental conditions, protection from weather conditions but not necessarily temperature changes. Must be capable of working in temperatures ranging from 105° to 32° Fahrenheit.&nbsp;</li></ul><ul><li>Frequent ability to safely and efficiently lift items weighing up to 50lbs and move items weighing up to 80lbs.</li></ul><ul><li>Stand/walk for up to 10-12 hours and is frequentlyrequired to walk and reach with hands and arms&nbsp;</li></ul><ul><li>The employee is routinely required to work at heights of up to 45 feet and within restrictive areas of 24 inches. Where you may needto be able to stand, climb, balance, stoop, kneel, crouch, or crawl.</li></ul><ul><li>Must be capable of occasional and/or continuous feeling, seeing, hearing, bending, twisting, stooping, pushing, pulling, balancing, gripping, climbing, crawling, sitting, handling objects, and repetitive movement using both hands and feet. Must comply with all safety requirements and protocols, including without limitation Lock out tag out safety protocols and fall protection safety protocols.</li></ul>#LI-BB1#LI-Onsite Apply Now

Symbotic

Automation Maintenance Technician

<h4>MICHELIN RACEWAY ROAD ATLANTA</h4>Recognized as one of the world’s best road courses, Michelin Raceway Road Atlanta is a 2.54-mile road course situated in the rolling hills 35 minutes north of Atlanta. The multi-purpose facility hosts the 10-hour Petit Le Mans race that closes out the IMSA schedule and is the final of the four endurance races contested by the series. The track prides itself on a family-friendly atmosphere, with a “Kids 12 &amp; Under Are Always Free” policy.SummaryResponsible for all general building and facility maintenance and upkeep; ensure all facilities are maintained at the highest standard level to provide safe environment for staff, visitors, and the public by performing the following duties.Essential Duties and Responsibilities include the following. Other duties may be assigned.Perform general cleaning, garbage removal/disposal, from restrooms and common areas.Perform general grounds keeping, sweeping, mowing and trimming grass using hand, power or riding mower, trims and edges around common areas, walkways, walls, etc.Performs general manual labor tasks including loading, unloading, lifting, and moving materials.Perform basic and general repair and maintenance on track equipment utilized in grounds keeping (mowers, hand tools, etc.)Perform basic and general repair and maintenance of buildings, facilities and /or equipment as needed.Operate forklift, front loader, or other equipment and/or vehicles, both on and off track and in common areas.Maintain a safe working area.No travel required.QualificationsTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Education and/or ExperienceHigh school diploma or general education degree (GED); or 1-3 years related experience and/or training; or equivalent combination of education and experience.Language SkillsAbility to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.Mathematical SkillsAbility to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.Reasoning AbilityAbility to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.Computer SkillsBasic computer skills.Other Skills and AbilitiesUse of common hand tools to perform basic repair and maintenance on buildings, facilities, and/or equipment. Ability to plan, organize and coordinate multiple projects. Effective time management, organization and multi-tasking skills.Other QualificationsMust be available to work some evenings and/or weekends.Position is safety sensitive and participates in the corporate Substance Abuse Program (SAP).This position drives company owned vehicles, including equipment, golf carts and other company-owned vehicles. Must pass driving record issued by Risk Management.Physical DemandsThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel. The employee is frequently required to stand; walk; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.Apply Now!Learn more about this role and our team by applying at <a href="http://www.careers.nascar.com" target="_blank">www.careers.nascar.com</a> for consideration.We are a company unlike any other. We want you to bring your experience, skills and passion to our close-knit, high-energy environment in which our employees thrive and where you can prosper. We know the key to our success is our employees and we offer highly competitive salaries, a solid benefits package focused on wellness, and opportunities for you to grow and develop both personally and professionally. It won’t take you long to find out that you are on the right track here at NASCAR!NASCAR is committed to fostering a diverse work environment where all employees feel valued and empowered. NASCAR is an Equal Opportunity Employer (EEO). We seek to attract and retain the best qualified people available. All qualified applicants will receive consideration for employment without regard to race, color, gender, gender identity and expression, age, national origin, disability, religion, sexual orientation, genetic information, pregnancy, veteran status or any basis that is protected by applicable law except where a bona fide occupational qualification exists.Follow us on Twitter @NASCARJobs to stay current on all of our openings.

NASCAR

General Maintenance Laborer (Part-time)

Hiring Manager:&nbsp;Kimberly A. Davis&nbsp;Job Abbreviation:&nbsp;ESG900_M3_E&nbsp;Pay Grade:&nbsp;&nbsp;CDPENT-17&nbsp;Pay Range:&nbsp;$165,800.00&nbsp;-$248,800.00&nbsp;Join the Clean Energy RevolutionBecome&nbsp;a&nbsp;Senior Manager - Powerline Trades Technical Training Delivery&nbsp;at Southern California Edison (SCE) and build a better tomorrow. In this job, you’ll&nbsp;work closely with business line partners to provide oversight and guidance for Transmission and Distribution technical programs to ensure delivery of high quality training to enable a safe, proficient and compliant workforce. You will manage resources and budget levels to meet strategic objectives and operational needs for the following training organizations: Distribution, Transmission, Mobile Training and the Drive School.&nbsp; In addition, you will be responsible for the safety and growth of the T&amp;D Training facility, staff, and students. As a&nbsp;Senior Manager - Powerline Trades Technical Training Delivery, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?<h4>Responsibilities</h4><ul><li>Enhances advanced training programs on energy management systems (EMS), network applications, and power system simulations to enhance real-time operational performance</li><li>Leads needs assessments to identify gaps in EMS, network applications, and simulation skills and knowledge</li><li>Creates customized curriculums, educational materials, hands-on exercises, and simulations to train internal and external stakeholders on utilizing EMS tools and advanced network applications.</li><li>Evaluates training effectiveness through assessments aligned to learning objectives and NERC requirements</li><li>Improves learning courses, in-person exercises, and training labs focused on building skills in utilizing EMS applications and network tools</li><li>Designs and manages a training metrics program that tracks progress in skills proficiency</li><li>Leads the implementation of compliant technical training documentation and systems across the company by ensuring proper version control and maintenance procedures.</li><li>Partners with key stakeholders to identify critical upgrades, new platforms, and technical tools that will be rolled out to develop comprehensive training programs in alignment with these projects to upskill operations teams on new technical capabilities</li><li>A material job duty of all positions within the Company is ensuring the protection of all its physical, financial and cybersecurity assets, and properly accessing and managing private customer data, proprietary information, confidential medical records, and other types of highly sensitive information and data with the highest standards of conduct and integrity.</li></ul><h4>Minimum Qualifications</h4><ul><li>Five or more years of experience supervising a team of direct reports and/or project management.</li><li>Experience with energy management, delivery, grid control or power system planning.</li><li>Experience creating customized curriculum, educational materials, and simulations for training.</li></ul>Preferred Qualifications<ul><li>Demonstrated experience applying safety leadership practices with high hazard trades to enhance culture</li><li>Strong leadership, communication and influencing skills to build consensus with client and partner organizations.</li><li>Experience developing strategies, implementing solutions and measuring success</li><li>Experience collaborating with, and making recommendations to, Senior Management and Executives.</li><li>Excellent, engaging, and persuasive communication / presentation skills (oral &amp; written); both 1:1 and large audience.</li><li>Strong work ethic and ability to multi-task and handle competing priorities.</li></ul>Additional Information&nbsp;<ul><li>This position’s work mode is&nbsp;hybrid.&nbsp;The employee will report to an SCE facility for a set number of days with the option to work remotely on the remaining days.  Unless otherwise noted, employees are required to work and&nbsp;reside in the state of California.  Further details of this work mode will be discussed at the interview stage.&nbsp;The work mode can be changed based on business needs.</li><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.</li><li>Visit our&nbsp;Candidate Resource&nbsp;page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!</li><li>The primary work location for this position is&nbsp;Chino.&nbsp; However, the successful candidate may also be asked to work for an extended amount of time at Rancho Cucamonga, Corona, Tulare and Daggett. </li><li>Position will require up to 20%&nbsp;traveling and being out in the field throughout the&nbsp;SCE service territory.&nbsp;</li><li>Relocation does not apply to this position.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.Southern California Edison is a proud Equal Opportunity Employer, including disability and protected veteran status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

Southern California Edison

Senior Manager - Powerline Trades Technical Training Delivery

Position PurposeReporting to Vice President of Operations and under general supervision of Director of Power Plant, maintain and supervise heating systems operations, with special responsibility for emergency service, maintenance of equipment, and installation. Compensation for this position includes, and requires, residing in on-campus housing in order to respond to off hour emergencies.&nbsp;X Full-Time󠆱 Part-time󠆱 ExemptX NonexemptEssential Duties and Responsibilities/Functions•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Operate boilers and controls.•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Train and supervise students on operation and repair of equipment as assigned.•&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Provide routine and emergency services.•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Troubleshoot, supervise, and/or make repairs on gas and fuel pressure lines, boilers, heaters, pumps, compressors, motors, controllers, reducing station, heat exchangers, generators diesel/gas.&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Schedule and supervise external contractors hired for work related to heating systems.•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Direct repairs to boiler work such as tube, header and brickwork, casing work and flue work.•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Install heating system equipment as required.•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Order oil and gas deliveries.•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Inspect fuel tanks.•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and maintain records on treatment, oil, gas and chemicals consumption and steam and hot water production.•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Cooperate and work with State and other inspector's, as required.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate in institutional professional development and training.•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Perform other related duties as assigned.&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Assist with general campus facilities maintenance as necessaryQualifications (Skills and Abilities Required)•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; High School diploma or a GED•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 5 years of boiler operations experience•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Demonstrated knowledge of combustion and mechanical process equipment and process diagrams such as P&amp;ID’s•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Demonstrated strong communication skills in both written and oral form including following operating procedures.•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Demonstrated ability to work independently and on teams with minimal supervision.•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Demonstrated ability to utilize computer systems and software applications (i.e., Allen Bradley equipment, Rockwell software, Windows) and the capability to learn others such as DCS control systems.•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Demonstrated knowledge of or the ability to learn local, state and federal regulations (OSHA, EPA, RCRA, NRC, and DOT).•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Work requires the ability to climb ladders, wear PPE including respirators, hearing protection, and fall protection•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Handle/move material and equipment in excess of 25lbs. (i.e. 55-gallon drums).•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Position is classified as “essential personnel” this requires to be occasionally on call to respond to operational or emergency situations.Working Conditions<ul><li>This position will primarily be working in all areas across the college campus in performing a wide range of tasks and responsibilities, both indoors and out.</li><li>Must be able to work outdoors, holidays, weekends and overtime as business needs demand.</li></ul>Physical Requirements<ul><li>Ability to lift 50 pounds and handles the physical demands of the job including standing and bending, operating equipment for long periods, working in all weather conditions (heat and cold).</li></ul>Supervisory Responsibility<ul><li>No direct supervisory requirements although the ability to be lead point of contact for facilities team is expected.</li></ul>Other DutiesPlease note this position (job) description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this position (job).&nbsp; Duties, responsibilities and activities may change at any time with or without notice.

Williamson College of the Trades

Power Plant Operator/Facility Mechanic

Company Description About Veolia North America A subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a>. Job Description BENEFITS Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Position Purpose: Provides day-to-day monitoring and basic plant and pump/booster station operations, routine lab tests and basic corrective and preventative maintenance activities.Chosen candidate will receive company vehicle, cell phone and will be required to travel to multiple sites. Primary Duties/Responsibilities: <ul><li>Operates equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures. Monitors and observes operating conditions, records observations and data in shift log. Diagnoses basic operational problems and takes corrective action per procedure.</li><li>Performs routine CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment which may include pumps, engines, centrifuges, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed, odor control, disinfection equipment, vacuum filters and belt presses. Reports and documents results of work performed and enters into appropriate database. Promptly reports any operational problems with machines or equipment to Lead or Supervisor.</li><li>Collects water, wastewater, industrial waste, groundwater, sludge, residuals and/or gas samples according to schedule. Performs field tests (chemical, physical and biological) in order to pace chemical dosages for process and odor control units. Prepares chemical solutions, monitors supplies and recommends reorder.</li><li>Performs routine lab tests and prepares reports per procedure.</li><li>Performs routine instrument calibration for portable meters including, but not limited to, dissolved oxygen, pH, H2S, percent oxygen, lower explosive limit.</li><li>Learns to inspect and becomes proficient at mechanical troubleshooting to determine repairs needed. Dismantles equipment to gain access to and repairs defective parts using hand tools, power tools and precision measuring and testing devices. Re-assembles and tests equipment ensuring safe and efficient operating condition is restored. Learns to troubleshoot hydraulic, pneumatic and electronic equipment and instrumentation.</li><li>Performs manual labor including cleaning equipment, facilities and grounds as required and properly disposes of waste according to safety and environmental policies. Operates vehicles, mobile equipment and material handling equipment for operational and maintenance purposes.</li><li>Performs facility maintenance and repair and may replace or install light bulbs, fluorescent tubes, damaged glass, windows, doors, partitions, ceiling or floor tiles, door locks, carpet, and/or paint.</li><li>Learns to estimate time and material costs for various projects. May assist in other areas of facility as directed.</li></ul> Work Environment: <ul><li>Spends 100% of the time in operations environment.</li><li>Typically spends 25 - 35% of time exposed to outdoor and sometimes inclement weather.</li><li>Company service vehicles are used as required.</li><li>Travels 1 - 2 times per year for company provided training.</li><li>May be required to travel up to five consecutive days.</li><li>May serve rotational 24-hour emergency on-call.</li><li> Possible Work Hazards : May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards.</li></ul> Qualifications Education/Experience/Background: <ul><li>High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions.</li><li>Six months to two years of experience in a related position with experience in a similar environment preferred with ability to comprehend specifications, blueprints and manuals.</li><li>Experience using material handling equipment, pressure gauges and precision measuring instruments.</li><li>Experience using power, pneumatic, hydraulic and hand tools and shop tools such as drill press, band saw, bench grinder, torque wrench preferred.</li></ul> Knowledge/Skills/Abilities: <ul><li>Ability to perform basic mathematical calculations.</li><li>Some vocational training and mechanical aptitude preferred, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment.</li><li>Must have the ability to diagnose basic and routine process and mechanical problems and take remedial corrective action.</li><li>Must have basic computer skills and have ability to operate programs for process control, the Computer Maintenance Management System, and laboratory/industrial pretreatment QA/QC.</li><li>Must consistently demonstrate the ability to learn and independently perform assigned duties and meet or exceed production and quality goals.</li><li>Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily.</li><li>Must be able to serve rotational 24-hour emergency on-call if required by site.</li></ul> Required Certification/Licenses/Training: <ul><li>Minimum water/wastewater license as required by regulatory agency at site.</li><li>Must possess a valid driver's license and a safe driving record.</li><li>Employee Orientation, Departmental Operating Procedures, Safety, OSHA and Quality Training.</li><li>HAZWOPER (Hazardous Waste Operations and Emergency Response) Level I and II First Responder Certification if required by site. Obtain and maintain minimum water / wastewater operator state certification.</li><li>Must become proficient in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, gas detectors, confined space equipment, etc.)</li><li>Forklift Certification if required by site.</li><li>Training in operation of mechanical drives, hydraulic pumps and valves, pneumatics, electronics and control systems.</li><li>Obtain HVAC, Electrician, Plumber's or other trade License if assigned to that area.</li><li> Note : Tech will not perform duties unless properly licensed.</li><li>Training in the use of energy management systems as needed.</li><li>Works toward increasing skills in additional functional areas or in obtaining advanced skills / maintenance certifications.</li><li>May perform more advanced functions as part of training and development.</li></ul> Physical Requirements: <ul><li>Amount of time spent - Standing 25%, Walking 75% for as many as five miles per shift.</li><li>Requires close visual and hearing observation to detect non-conformance and machine malfunction.</li><li>Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms.</li><li>Works in various positions; works on ladders, catwalks, and supports at heights of 50 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds.</li><li>Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 10 feet.</li><li>Occasional stooping, bending or kneeling and entering confined spaces.</li></ul> Additional Information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

754 Facilities and Maintenance Jobs