field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

ResponsibilitiesUnder the direction of the Maintenance Area Lead, this position is responsible for training, coaching, and motivating hourly crafts personnel to provide reliable equipment consistent with customer quality and delivery requirements. Direct reports include a group of hourly personnel assigned to their area and shift. The incumbent communicates continually with the Engineering and EHS Departments, as well as with Control Technicians and Maintenance Leads. Externally, they communicate with vendors and contractors.&nbsp;Responsibilities include but are not limited to:<ul> <li>Coaching, supervising, and training skilled craftspeople, apprentices, and laborers in the repair and maintenance activities associated with their assigned shift and area.&nbsp;</li> <li>Assuming single point accountability for maintenance activities during their respective shift.&nbsp;</li> <li>Performing frontline troubleshooting activities on equipment in area of responsibility.</li> <li>Directing safety awareness programs to manage workforce safety, maintain housekeeping, and assist the Operations Department in area safety analysis.&nbsp;</li> <li>Coordinating PM and other outage activities for equipment in area of responsibility.&nbsp;</li> <li>Planning daily activities for assigned maintenance crews and provide the tools, materials, and technical direction for normal maintenance, preventative maintenance, and capital work in area of responsibility.&nbsp;</li> <li>Performing root cause analysis and “5-why” techniques to eliminate maintenance downtime.&nbsp;</li> <li>Partnering with the Engineering Department on repetitive maintenance problems to continuously improve the reliability of responsible equipment and facilities.&nbsp;</li> <li>Coordinating and managing the development of maintenance work procedures and standard practices to maximize quality work and eliminate waste.&nbsp;</li> <li>Driving continuous improvement activities to eliminate all waste, especially as it relates to maintenance downtime, safety, work practices, and employee involvement.&nbsp;</li> <li>Assisting other Maintenance Supervisors, as needed.&nbsp;</li> <li>Managing applicable labor issues effectively within respective work area.</li> <li>Performing administrative requirements to effectively manage work force.&nbsp;</li> <li>Performing other duties as assigned.&nbsp;</li></ul>QualificationsBasic QualificationsFor this position to be successful, the incumbent should have:<ul> <li>A High School Diploma or GED equivalent from an accredited institution.&nbsp;</li> <li>Minimum 3 years of maintenance supervisory experience within a heavy manufacturing environment or a minimum of 1 year of supervisory experience in the Military.</li> <li>Minimum 1 year of experience in a unionized work environment.&nbsp;</li> <li>This position is subject to the International Traffic in Arms Regulations (ITAR), which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. ‘Green Card Holder’), Political Asylee, or Refugee.&nbsp;</li></ul>Preferred QualificationsFor this position to be successful, preference is given to candidates with:&nbsp;<ul> <li>A technical college degree, journeyman status, or a military equivalent.&nbsp;</li> <li>Experience with Allen Bradley programable logic controllers.&nbsp;</li> <li>Working knowledge of motor control centers and distribution control systems.&nbsp;</li> <li>Strong written and verbal communication skills.&nbsp;</li> <li>Demonstrated ability to work in and lead a multi-dimensional team.&nbsp;</li> <li>Troubleshooting experience on hydraulic and pneumatic systems.&nbsp;</li> <li>A strong electrical and/or hydraulics background. &nbsp;</li></ul>Working ConditionsThis position involves moderate exposure to risk of accident and requires following basic safety precautions. Work is normally performed on the shop floor. While not exposed to hazardous materials, this position requires wearing full PPE to protect from mobile equipment, hot materials, and noise when on the shop floor.&nbsp;This position requires moderate physical activity, such as walking, sitting, and standing for extended periods of time, as well as some lifting. &nbsp;This position also requires a willingness to maintain a flexible work schedule and be available 24/7.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

Industrial Maintenance Supervisor - 2nd and 3rd Shift

ResponsibilitiesJob Description:Under the supervision of the Maintenance Manager, the Maintenance Technician position is accountable for:<ul> <li>Disassemble machines and take off parts for replacement or repair by using cranes, hoists, chain falls, hand tools, and jacks.</li> <li>Examine or carry out tasks on broken machine parts and identify defective parts or give recommendations to supervisors on repair requirements.</li> <li>Replace, fix, or realign machine parts and accessories in line with production specifications.</li> <li>Put machine parts together after accomplishing maintenance and repair work. &nbsp;</li> <li>Assists other maintenance team members in meeting department requirements while serving as a resource to production, engineering, and other plant personnel. Other individual maintenance craft knowledge considered a plus.</li> <li>Work independently with little supervision.</li> <li>Maintain a clean, organized, and safe work environment.</li> <li>Exhibit outstanding ability to learn and comprehend the fundamentals of the functioning machines.</li> <li>Excellent general understanding of hydraulic systems with display of mastery in troubleshooting by utilizing deductive reasoning and schematics</li> <li>Perform other duties as assigned.</li></ul>Organization Location:&nbsp;3960 S Marginal Rd, Cleveland, OH 44114QualificationsBasic Qualifications:<ul> <li>High School Diploma or equivalent (G.E.D.) from an accredited institution (Required)</li></ul>Preferred Qualifications:<ul> <li>Ability to lift 40 pounds</li> <li>Electrical controls awareness a plus.</li> <li>Knowledge of machine mechanics, pneumatics, hydraulics, blueprint reading, (welding and fabrication a plus) operation of machine tools used to make, modify and/or repair machine components.</li> <li>Experienced and knowledge in maintaining and repairing&nbsp;injection presses.</li> <li>3+ years previous manufacturing experience</li> <li>Journeyman's Card is preferred</li> <li>Ability to effectively work AND communicate as part of a cell team</li></ul>While not exposed to hazardous materials, this position requires wearing PPE (personal protection equipment). Following all basic safety precautions will reduce risk of potential injury. This position requires anywhere from light to moderate physical activity, such as walking, sitting, and standing for extended periods of time, as well as some lifting.Benefits:<ul> <li>Competitive wages</li> <li>Clean, air-conditioned work facility (even on factory floor)</li> <li>401k savings plan includes 3% of your eligible compensation, and a match of your deferred pre-tax savings dollar-for-dollar up to 6% of your base pay</li> <li>Tobacco-Free Credit</li> <li>Medical, Dental, Disability, Vision, and Life Insurance available</li> <li>Vacation Eligibility</li></ul>Howmet Aerospace’s Mission and Values:Everyone, Everyday, Everywhere… We win when our customers win; we innovate, deliver, and operate as world class. We excel as high-performance teams safely, with respect and integrity.Howmet Aerospace holds a leading, global position in commercial transportation and military defense aircraft markets. Working in close partnership with our customers, we solve complex engineering challenges to transform the way we fly, drive, and power. Through the ingenuity of our people and cutting-edge advanced manufacturing techniques, we deliver these high-quality products at an efficient rate that ensure customer success, shareholder value, and strive to improve the fuel economy. Howmet Aerospace is where your career takes flight!Howmet Aerospace - Tempcraft is a key internal supplier to Howmet Engine Systems (HES) through two Business Centers:<ul> <li>Patterns Business Center (Wax Patterns, Molds, and Plastic Airfoils).</li> <li>Tooling Business Center (Wax, Plastic and Ceramic Injection Core Tooling, Fixtures, and Gauges).</li></ul>About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Maintenance Technician, 1st Shift

Maintenance Technician, 3rd Shift

Maintenance Technician, 2nd Shift

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Position Purpose: Consistently leads an assigned team to inspect, maintain, repair and install mechanical, electromechanical, pneumatic and/or hydraulic equipment at plant and/or pump stations. Primary Duties/Responsibilities: <ul><li>In conjunction with supervisor, or in his/her absence, reviews daily team requirements. Oversees work assignments to ensure that schedules are met. May recommend changes to schedule to optimize production and/or reduce costs. Ensures that labor reporting is accurate and balances with labor tracking system. Provides feedback to Supervisor on labor, material and equipment demands needed to achieve schedule. </li><li>Monitors work assignments and ensures that team members are meeting or exceeding production and quality standards. Coaches and trains team members to increase skill level and to improve productivity, safety, quality and processes in a cost-effective manner. Trains team members to troubleshoot and resolve problems.</li><li>Provides technical guidance, troubleshoots, resolves or coordinates resolution of technical issues/problems on a proactive basis. Models and teaches finding cost effective solutions to tasks.</li><li>Prepares work orders either manually or from a Computer Maintenance Management System as required and prepares work related reports, procurement requisitions, charts, graphs and data submittal requirements in an accurate and timely manner. </li><li>Models safe work practices and provides leadership in achieving safety goals. May assist with safety training. Ensures that safety awareness is ongoing, that good housekeeping is practiced and that environmental and safety regulatory requirements are met. Reports potential problems to supervisor on a timely basis.</li><li>Performs duties of Maintenance Tech III as required.</li><li>May assist with maintaining parts, spares and maintenance procurement and inventory.</li><li>May assist in other areas of plant as directed. </li></ul> Work Environment: <ul><li>Spends 100% of the time in operations environment.</li><li>Typically spends 25 - 35% of time exposed to outdoor and sometimes inclement weather. </li><li>Company service vehicles are used as required. </li><li>Travels 1 - 2 times per year for company provided training. </li><li>May serve rotational 24-hour emergency on-call.</li><li> Possible Work Hazards : May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards.</li></ul> Qualifications Education/Experience/Background: <ul><li>High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions.</li><li>Ability to perform basic mathematical calculations.</li><li>Over five years of experience in a related position in a similar environment with ability to comprehend complex specifications, blueprints and manuals.</li></ul> Knowledge/Skills/Abilities: <ul><li>Vocational training and mechanical aptitude required, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment.</li><li>Demonstrates ability to mentor, coach and train others to identify cost effective solutions.</li><li>Must demonstrate ability to use computer programs for preparing work orders, work related reports, charts, graphs and data submittal requirements.</li><li>Must demonstrate proficiency in and model the care and use of all site specific, facility required PPE (Personal Protection Equipment).</li><li>Must consistently demonstrate the ability to perform all assigned tasks in an organized, accurate and timely manner and the ability to efficiently maintain, install and repair any equipment used in the facility. Fabrication and welding experience may be required, if necessary, at site.</li><li>Must have the ability to diagnose problems regardless of complexity, troubleshoot mechanical, electro-mechanical, hydraulic or pneumatic equipment and take corrective action within policy and procedure limitations.</li><li>Good verbal and written communication skills are necessary.</li><li>Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily.</li></ul> Required Certification/Licenses/Training: <ul><li>Minimum water/wastewater license as required by regulatory agencies at site.</li><li>Must possess a valid driver's license (commercial license and heavy equipment operator license is desirable) and a safe driving record.</li><li>Employee Orientation, Departmental Operating Procedures, Safety, OSHA and Quality Training.</li><li>HAZWOPER (Hazardous Waste Operations and Emergency Response)</li><li>Obtain or maintain HVAC, Electrician, Plumber's or other trade License if assigned to that area. Note: Will not perform duties unless properly licensed.</li><li>Forklift Certification if required by site.</li><li>May perform more advanced functions as part of training and development.</li><li>Must be able to serve rotational 24-hour emergency on-call if required by site.</li></ul> Physical Requirements: <ul><li>Amount of time spent - Standing 25%, Walking 75% for as many as five miles per shift.</li><li>Requires close visual and hearing observation to detect non-conformance and machine malfunction.</li><li>Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms. </li><li>Works in various positions; works on ladders, catwalks, and supports at heights of 50 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds. </li><li>Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 10 feet. </li><li>Occasional stooping, bending or kneeling and entering confined spaces.</li></ul> Additional Information Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Plant Maintenance Mechanic III - Wastewater Treatment

Compensation Type: HourlyCompensation: $18.25Job SummaryJob Description Summary The Grounds &amp; Facilities Worker responsibilities include but are not limited to office moves, furniture moves, event setups, pickup and delivery of items from dock and to and from other campus locations; maintaining lawns, landscape, leaf clean-up, sidewalks, parking lots and parking garage; trash and recycling pickup and disposal; snow removal and application of de-icing product.Exterior Grounds Maintenance <ul><li>Maintains outside premises. Mows, trims, blows, edges, aerates and overseeds. Plants, waters, fertilizes, prunes, mulches, weeds; maintains plant beds, shrubs and trees; performs leaf blowing and removal. Applies pesticides, insecticides, and herbicides. Patches potholes, stripes lots, installs signs and performs general cleaning responsibilities to maintain sidewalks and parking lots; maintains flags. Removes debris from walks, lawns, plant beds and parking lots; empties trash cans and picks up loose trash on campus grounds and parking lots.</li><li>Utilizes heavy equipment including forklift, aerial lift, mowers, trucks, utility vehicles and tractors; power tools, blowers, weed eaters, hand tools, seasonal equipment, snow removal vehicles, snow blowers; performs preventive maintenance and repair of grounds equipment. Enters, fulfills, completes, and submits work orders in timely manner.</li><li>Participates in snow removal as assigned; utilizes shovels, snow blowers, utility vehicles, tractors, salt spreaders and trucks for snow removal; cleans walkways, stairs, parking lots and roadways of ice and snow; applies de-icing products to various areas to melt ice and provide safe conditions.</li></ul>Interior Facilities Support <ul><li>Moves office and conference room furniture (e.g. desks, chairs, cabinets, bookcases) within rooms, between buildings, regional learning centers and off campus locations. Arranges event setups for campus meetings, classroom activities, public events, or conferences (e.g. furniture, stage, equipment, tables, chairs).</li><li>Conducts regular and routine building upkeep duties to include but not limited to emptying recycle containers and ensuring buildings are in presentable condition (e.g. floor mats straight, white boards clean, chairs pushed in, etc.). Paints small interior areas and exterior areas (e.g. offices, handrails, curbs) and does minor drywall repair as assigned.</li><li>Utilizes forklift, box trucks, utility vehicles, cardboard baler, trash compactor, as directed; utilizes hand tools as necessary. Enters, fulfills, completes, and submits work orders in timely manner.</li></ul>Environmental &amp; Operational Support<ul><li>Ensures cleanliness and appearance of facilities by monitoring classrooms, offices, lobbies, restrooms, administrative areas and reports all issues to Facilities supervisor or manager.</li><li>Removes inappropriate markings, stickers, decals, advertisements, graffiti; performs safe cleanup, removal, and disposal of blood-borne pathogens and other infectious or hazardous materials.</li><li>Performs emergency flood cleanup as assigned. Assists Police Department during building evacuations and emergencies.</li></ul>Culture of Respect<ul><li>Fosters and maintains a safe environment of respect and inclusion for faculty, staff, students, and members of the community.</li></ul>Other duties as required.*Regular, predictable, and punctual attendance is required. MINIMUM EDUCATION AND EXPERIENCE REQUIRED <ul><li>High School Diploma or GED.</li><li>Possession of or ability to obtain required Forklift Operator’s Certificate within 180 days of employment. Must possess the Ohio Commercial Pesticide Applicator license within 180 days of employment.</li><li>State Motor Vehicle Operator's License or demonstrable ability to gain access to work site(s).</li><li>*An appropriate combination of education, training, coursework and experience may qualify a candidate. </li></ul>CSCC has the right to revise this position description at any time. This position description does not represent in any way a contract of employment. Full Time/Part Time:Full timeUnion (If Applicable):TeamstersScheduled Hours:40Additional InformationIn order to ensure your application is complete, you must complete the following:<ul><li>Please ensure you have all the necessary documents available when starting the application process. For all faculty positions (Instructor, Annually Contracted Faculty, and Adjunct), you will need to upload an unofficial copy of your transcript when completing your aplication. </li><li>Prior to submitting your application, please review and update (if necessary) the information in your candidate profile as it will transfer to your application.</li></ul>If you are a current employee of Columbus State Community College, please log in to Workday to use the internal application process.Thank you for your interest in positions at Columbus State Community College. Once you have applied, the most updated information on the status of your application can be found by visiting your Candidate Home. Please view your submitted applications by logging in and reviewing your status.

COLUMBUS STATE COMMUNITY COLLEGE

Grounds/Facilities Technician

Responsibilities<a>Howmet Aerospace</a>, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications.Summary: Howmet Structure Systems has an immediate opening for a Electrical Maintenance Technician located at our Niles Facility. This position is responsible for assisting in the maintenance operation and preventative maintenance of manufacturing equipment within the plant.Essential Duties and Responsibilities: This is not an exhaustive list of responsibilities; it is intended to provide a representative summary of the major duties and responsibilities of a Mechanical Maintenance Technician.Primary Function:To inspect, repair, replace, adjust, install, wire and maintain all electrical and electronic equipment in the plant or assigned area including power transmission lines transformers and related equipment. Make mechanical repairs as required in connection with electrical service.Tools and Equipment:Wiring diagrams, drawings, electrical and electronic tools, gauges, calibrative and testing equipment, hand tools, drill press, hand grinder, commutator and bench lathe, electrical drills, power hack saw, wire stripper, pipe threading machine, burning and welding equipment, soldering iron, pipe bender, bock and tackle, measuring tools, ect.Materials:A.C. and D.C motors and generators, transformers, rectlflers, electronic controls and regulator: various mill electrical equipment, power disruption and control circuits, electronic computing and controls systems, various types of instruments, data recording and processing equipment, control panels and circuits, electronic gauges and detectors, industrial T.V., public address systems, condensers, pumps, fans, poles, hardware, cable wire, conduit and fittings, lighting fixtures, repair and replacement parts, lubricants, ect. &nbsp;Working Procedures:<ul> <li>Receives verbal or written instruction covering the scheduling and emergency repair and installation and inspection work to be done.</li> <li>Analyzes all types of circuits and wiring diagrams to modify, service, install or repair all types of electronic devices and systems, various mill electrical equipment, electronic computing and controls systems, power and distributing control equipment, measuring, recording, processing and control devices, indication devices, instruments and gauges.</li> <li>Fabricates parts as required using machine and hand tools common to the trade. Burns, brazes, solders and performance simple layout, fabrication and welding in the servicing of electrical and electronic equipment, including related piping and mechanical component.</li> <li>Makes either temporary or permanent repairs or adjustments to equipment such as main motor drives, generators, control panels, relays, controllers, switchboards, circuit breakers, lighting circuits, resistors, etc.</li> <li>Install and repairs conduit, splicers, and insulates wires and cables, making splices on hot lines, isolates circuits for repairs.</li> <li>Maintains integrating, indicating, or graphic electrical or mechanical instruments.</li> <li>&nbsp;Makes mechanical repairs are required in connection with the servicing of electrical and electronic equipment including cranes.</li> <li>Advises when faulty equipment should be shut down for repairs.</li> <li>Tests, repairs and/or adjusts electronic scales to correct any variation from accuracy.</li> <li>Test, repairs and adjust electrical meters, such as osillograph, tachometers, ampmeter, voltmeter, power factory meters, phase shifter, etc.</li> <li>Cleans, paints, and lubricates equipment such as bearings, lights, reflectors, switch boxes, controls, pumps, compressors, fans, ect.</li> <li>Installs, repair and maintains power transmission lines, transformer, high tension sub station equipment such as disconnects, switch gear, bushings, insulator slings, lighting arrestors, phase wire grounding equipment.</li> <li>Assists other maintenance or operating personal in repair work as required.</li> <li>Fills out reports of maintenance work performed, parts and materials used, inspections made, etc.</li> <li>Operates cranes, machinery, mobile equipment, hydraulics lifts; erects and dismantles pepe scaffolds and performs necessary rigging duties in connection with the servicing of electrical and electronic equipment.</li> <li>Maintains a safe, clean&nbsp;and orderly conditions of work area and equipment.</li></ul>Pay Rate and Benefit<ul> <li>The combined rate of pay for this position is $33.90. &nbsp;This includes a base pay rate of $28.90 and $5 flat rate incentive per hour. &nbsp;</li> <li>We offer medical, dental, vision, 401k</li></ul>The above statements reflect the general details considered necessary to describe the principal functions of the job identified and shall not be constructed as a detailed description of all the work requirements that may be inherent in the job.Qualifications *Qualifications for Internal Candidates &nbsp; Basic Requirements<ul> <li>Must have completed a recognized, appropriate apprenticeship or have at least eight (8) years of relevant on-the-job industrial electrical experience, to include digital electronics, PLC’s, combustion, and instrument repair, or a two (2) year degree in Electrical Engineering Technology (or equivalent) with two (2) years of relevant on-the-job industrial electrical experience.</li> <li>High School diploma or GED</li> <li>Ability to work in a manufacturing atmosphere safely and follow safety practices and regulations; Must be willing and able to work any shift in a 24/7 operation and overtime including weekends and holidays.</li> <li>Ability to lift at least 50lbs as needed.</li> <li>Must have basic computer skills to create work orders, complete work orders, plan work, identify parts, and locate spare parts using a computerized maintenance management system after training.&nbsp;</li> <li>Must be able to legally operate company motor vehicles and mobile equipment.</li> <li>Must have strong math skills including reading fractions and decimals.</li> <li>Must have strong troubleshooting skills; Basic welding and flame cutting experience with a basic understanding of hydraulics and pneumatics.&nbsp;</li> <li>The position requires an individual to stand, climb, work at heights, stoop, move equipment; bend, reach, or lift for prolonged periods of time.&nbsp;</li> <li>PPE includes FR9 clothing, safety glasses, hard hat, and steel toed boots with metatarsal protection, hearing protection and other safety equipment as required.&nbsp;</li> <li>Qualified candidates must be able to pass a background test, physical&nbsp;and drug screen.</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Maintenance Technician – Electrical

Compensation Type: HourlyCompensation: $21.00Job SummaryThe Maintenance Technician is responsible for maintenance and repairs to campus facilities in compliance with work orders and the preventive maintenance schedule. The Maintenance Technician performs skilled maintenance, construction, and repair work related to the inside and outside maintenance and care of facilities, conducts routine inspections of premises and equipment, performs preventive maintenance, and handles basic repairs and maintenance.ESSENTIAL JOB FUNCTIONS Building Maintenance <ul><li>Makes basic electrical repairs and takes volt and amp readings. Assists in replacing motors, lighting ballast and bulbs, electric switches, and receptacles. Checks and replaces fuses and circuit breakers. Performs minor electric wiring installation and repair. Diagnoses and replaces emergency exit and emergency lighting fixtures. Diagnoses, repairs, and replaces electric hand dryers and photoelectric controls. Performs routine preventative maintenance of heating, ventilation and air conditioning equipment and responds to hot and cold calls.</li><li>Performs routine repairs and maintains building plumbing system. (i.e., repairs and unclogs sinks and floor drains, faucets, urinal, and closet flush valves and sealing rings.) Repairs kitchen appliances and office equipment including coffeemakers, refrigerators, ovens, paper shredders, staplers, window blinds, office furniture, locks/latches, and ice machines.</li></ul>Construction Support <ul><li>Uses carpentry methods to make building repairs and improvements. Builds shelves, hangs, repairs and replaces doors and openers, and performs other related tasks. Repairs drywall, lays floor coverings, makes minor roofing repairs, replaces ceiling tile, performs general masonry work, replace/repairs floor tiles, and other unskilled minor building maintenance repairs.</li></ul>Maintenance Housekeeping<ul><li>Clears walks, stairs, parking lots and roadways of ice and snow. Shovels and applies calcium and salt to areas. Utilizes shovels, snow blowers, tractors, salt spreaders, and trucks for snow removal. Applies salt, calcium, and sand to various areas to melt ice and provide safer conditions.</li><li>Maintains cleanliness of mechanical rooms and equipment. Performs various manual cleaning tasks including sweeping, dusting and mopping floors. Utilizes dust cloths, mops, pails, brooms, and various cleaning agents to perform cleaning tasks. Regularly performs indoor and outdoor building inspections.</li><li>Makes purchases for parts and supplies with supervisor’s approval. Enters, fulfills and submits completed works orders in an accurately and timely manner. Provides general support in other areas and assists with set-ups during special events.</li></ul>Culture of Respect<ul><li>Fosters and maintains a safe environment of respect and inclusion for faculty, staff, students, and members of the community.</li></ul>Other Duties and Responsibilities:<ul><li>Attends all required department meetings and training.</li><li>Works assigned schedule, exhibits regular and predictable attendance, and works overtime as required to meet workload demands.</li><li>Assists the Police Department during evacuations and emergencies. Assists at off-campus locations with maintenance and supply delivery.</li></ul>Minimum Education and Experience Required:<ul><li>High School Diploma or GED.</li><li>Three (3) years’ experience in general maintenance or a closely related field.</li></ul>Licenses and Certifications:<ul><li>State Motor Vehicle Operator's License or demonstrable ability to gain access to work site(s).</li><li>Possession of or ability to obtain required Forklift Operators Certification within 90 days of employment.</li><li>Must be insurable to operate a vehicle as a condition of initial and continued employment.</li></ul>Physical Requirements:<ul><li>Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions described in this position description. While performing duties of this job, the employee regularly stands and walks and occasionally sits. Employee frequently uses hands to hold and control tools and equipment. The employee occasionally reaches with hands and arms, climbs, balances, stoops, kneels, crouches or crawls. The employee frequently exhibits digital dexterity and eye-hand coordination when performing designated tasks. Employee occasionally lifts or exerts force on items, with varying weights of more than 50 pounds.</li></ul>Working Conditions:<ul><li>Exposure to direct sunlight, rain, and humidity while working outside for extended periods of time. Exposure to noisy vibrating equipment such as blowers, chainsaws, weed eaters, and other power equipment. Exposure to dirt, dust, debris, and odors. May experience minor cuts, burns, or other situations that may cause injury. Occasional risk of electric shock. Employee may be exposed to fumes or airborne particles, toxic, or caustic materials, and blood borne pathogens</li></ul>Full Time/Part Time:Full timeUnion (If Applicable):TeamstersScheduled Hours:40Additional InformationIn order to ensure your application is complete, you must complete the following:<ul><li>Please ensure you have all the necessary documents available when starting the application process. For all faculty positions (Instructor, Annually Contracted Faculty, and Adjunct), you will need to upload an unofficial copy of your transcript when completing your aplication. </li><li>Prior to submitting your application, please review and update (if necessary) the information in your candidate profile as it will transfer to your application.</li></ul>If you are a current employee of Columbus State Community College, please log in to Workday to use the internal application process.Thank you for your interest in positions at Columbus State Community College. Once you have applied, the most updated information on the status of your application can be found by visiting your Candidate Home. Please view your submitted applications by logging in and reviewing your status.

Maintenance Technician

ResponsibilitiesHowmet Aerospace in Niles, Ohio is seeking an Asset Manager to join our maintenance team on midnight shift. This position will directly coordinate and supervise the activities of hourly workers engaged in repair, maintenance, and installation of machines, tools, and equipment as well as the maintenance of buildings, grounds, and utilities. &nbsp;Essential Job Functions and Responsibilities:<ul><li>Follow Howmet’s Safety Regulations and Work Rules Handbook, along with all departmental specific safety regulations.</li><li>Ensures all departmental/plant safety standards are met.</li><li>Reviews job work orders to determine work priorities. Schedules repair, maintenance, and installation of machines, tools, and equipment to ensure continuous production operations.</li><li>Schedules and tracks department overtime utilizing a computerized system.</li><li>Coordinates activities of workers fabricating or modifying machines, tools, or equipment to manufacture new products or improve existing products.</li><li>Directs maintenance activities on utility systems to provide continuous supply of heat, cooling water, electric power, gas, or air required for operations.</li><li>Develops and operates computerized maintenance management system in conjunction with engineering and maintenance staff.</li><li>Reviews production, quality control, and maintenance reports and statistics to plan and modify maintenance activities.</li><li>Inspects operating machines and equipment for conformance with operational standards.</li><li>Plans, develops, and implements new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of labor and materials.</li><li>Reviews new product plans and discusses equipment needs and modifications with design engineers.</li><li>Requisitions tools, equipment, components, and supplies required for operations.</li><li>Directs training and indoctrination of workers to improve work performance and acquaint workers with company policies and procedures.</li><li>Evaluates staff and recommend personnel actions as necessary.</li><li>Confers with management, engineering, and quality control personnel to resolve maintenance problems and recommend measures to improve operations and conditions of machines and equipment.</li><li>Prepares department budget and monitors expenditure of funds in budget.</li><li>Recommends and monitors work performance of external contractors.</li><li>Monitors specifications for plant concerning OSHA, EPA, and other governmental applicable codes and regulations.</li><li>Must comply with all company attendance policies and guidelines; this includes, but is not limited to, regular attendance and occasional overtime.</li><li>Other duties as assigned.</li></ul>QualificationsBasic Qualifications:<ul><li>High School Diploma or GED equivalent from an accredited institution</li><li>Minimum of 3 years’ experience performing maintenance in a manufacturing environment</li><li>Minimum of 1-year experience supervising/managing a team.</li><li>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status.&nbsp; ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. ‘Green Card Holder’), Political Asylee, or Refugee.</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>Preferred Qualifications:<ul><li>A&nbsp;Bachelor's degree in Engineering, Management, Business Administration, or equivalent from four-year college or technical school is preferred.</li><li>Related experience and/or training in industrial maintenance in a heavy industrial setting.</li></ul>Skills and Abilities:<ul><li>Reads, analyzes, and interprets common scientific and technical journals, financial reports, and legal documents. Responds to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to effectively present information to top management, public groups, and/or boards of directors.</li><li>Ability to apply advanced mathematical concepts.&nbsp; Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis.</li><li>Defines problems, collects data, establishes facts, and draw valid conclusions using analytical reasoning. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.</li><li>Ability to use computer software systems such as Microsoft Office suite and relational databases.&nbsp; Power BI experience is preferred.</li></ul>Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly required to talk or hear.&nbsp; The employee frequently is required to walk, occasionally required to stand, sit; use hands to handle or feel; reach with hands and arms; climb or balance; stoop or kneel., The employee must occasionally lift and/or move up to 25 pounds with mechanical assistance.&nbsp; Specific vision abilities required by this job include close vision and ability to adjust focus.Equipment Used:&nbsp; Standard office equipment to include personal computers, copiers, fax machines, and other related equipment.&nbsp; Must have working knowledge of various testing equipment and hand-held tools.Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is frequently exposed to moving mechanical parts.&nbsp; The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme heat; risk of electrical shock; risk of radiation; and vibration.&nbsp; The noise level in the work environment is usually moderate.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet structures business manufactures metallurgically advanced lightweight multi-material solutions that range from titanium mill products to titanium forgings, extrusions and assembled systems for aerospace and defense applications.

Maintenance Asset Manager

Operations Floater (9 Month Position)Summary:&nbsp; Provides support as assigned in the operations department. Must be available to work a flexible schedule including nights and weekends as needed.Essential Duties and Responsibilities:&nbsp;includes the following. Other duties may be assigned. &nbsp;&nbsp; &nbsp;Maintenance Items<ul><li>Patches plaster and prepares surface for painting.</li><li>Assists in painting, and/or performs minor painting of fixtures, rooms, buildings, signs, and equipment.</li><li>Performs exterior grounds keeping duties, (e.g., cuts grass, cleans sidewalks, and assists in snow removal, trims trees and shrubs)</li><li>Regular Upkeep of equipment.</li><li>May be on call 24 hours, 7 days a week in shifts. Will be required to work other than normal hours for snow removal, agency breaks, building inspections, special projects, and other building emergency situations.</li><li>Performs other special projects as required by the Director of Facilities and IT or designee.</li><li>Helps load and unload items using tow motor.</li></ul>&nbsp; &nbsp; Custodial Items<ul><li>Scrubs, Mops, strip waxes and finish floors. Vacuums carpets. Shampoo Carpets.</li><li>Empties and cleans trash receptacles.</li><li>Restocks all paper hygiene supplies and soaps.</li><li>Washes Windows, walls, fixtures, desk and tabletops, and toys.</li><li>Dust and polish furniture.</li><li>Cleans ventilation grillwork, chair rails, baseboards, light fixtures, windows sills, and fire alarm devices.</li><li>Maintains a neat and organized maintenance supply room. Maintains all custodial equipment and supplies.</li><li>Notifies Supervisor of needs and restocks supplies.&nbsp; Assist with ordering of supplies.</li><li>Assist with mail/package delivery and receiving.</li></ul>&nbsp; Kitchen Items<ul><li>Performs cook’s duties when assigned such as assembling supplies, equipment, and food products necessary for food prep.&nbsp;</li><li>Preparation of items on the menus.</li><li>Assist other cooks/food service workers as needed.</li><li>Food prep/service, clean up and consumer supervision for catered events.</li><li>Clean up assigned areas.</li><li>Works with Food Service Supervisor in ordering and inventory of assigned areas. Keeps stock and area in an orderly fashion.</li><li>Maintain working knowledge of positions in the kitchen.</li><li>Working knowledge of Serve Safe training.</li></ul>&nbsp; Other Items<ul><li>Available to drive for special events such as Special Olympics events.</li></ul>Qualifications:&nbsp;High&nbsp;school&nbsp;diploma&nbsp;or general&nbsp;education&nbsp;degree&nbsp;(GED).&nbsp; Experience in basic carpentry, groundskeeping, operation of grounds maintenance equipment, mechanical abilities, preventive maintenance mind set and inventory management skills.Applicant must meet the additional requirements below…<ul><li>Must meet agency computer competency level requirements.&nbsp; Must have basic computer knowledge including but not limited to Microsoft Outlook, Word, and the ability to learn computer programs needed to complete assignments in operations department.</li><li>Must meet&nbsp;agency&nbsp;driving&nbsp;qualifications for transporting individuals on an agency vehicle.&nbsp; May be required to drive agency vehicles.&nbsp; Must hold valid State of Ohio driver’s license.&nbsp; Must successfully complete Van Driver Training program</li><li>Must obtain Serve Safe credentials after hire.</li><li>Needs knowledge of custodial safety practices</li><li>Must&nbsp;be&nbsp;able&nbsp;to perform&nbsp;work&nbsp;on&nbsp;an&nbsp;8&nbsp;foot&nbsp;ladder</li><li>Must&nbsp;be&nbsp;able&nbsp;to&nbsp;work&nbsp;other&nbsp;than&nbsp;normal&nbsp;shift&nbsp;hours&nbsp;as&nbsp;needed&nbsp;for snow&nbsp;removal,&nbsp;building&nbsp;inspections,&nbsp;in-services, absences within department,&nbsp;building&nbsp;emergencies,&nbsp;special&nbsp;projects&nbsp;and&nbsp;as&nbsp;requested&nbsp;by&nbsp;Director of Operations and IT or designee.</li><li>Must successfully complete a BCI background check.&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Must meet all other agency employment requirements.&nbsp; Must meet all requirements as outlined on the corresponding job description.</li></ul>Salary:&nbsp;Minimal annual salary $24,240 (to commensurate with experience)Hours: 40 hours per week during school year; 9 month positionAvailable:&nbsp;August 18th 2025Date Posted:&nbsp;May 13th 2025How to Apply:&nbsp; Pleasesubmit employment application and resume to&nbsp;<a href="mailto:jobapps@mcbdd.org" target="_blank">jobapps@mcbdd.org</a>&nbsp;Questions:&nbsp; Please contact Katie Cantrell (Human Resources Clerk) at 330-725-7751 ext. 288 The Medina County Board of Developmental Disabilities is an Equal Opportunity EmployerPosting Removal Date June 13th 2025

22 Facilities and Maintenance Jobs in Ohio