field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

ResponsibilitiesJob SummaryWork as a multi-functional team member to build a shelled pattern using Product Criteria and Robots. Will be required to clean work area and Robot cell area, including sweeping and mopping the floor.Essential Functions<ul> <li>Must be able to read and interpret Product Criteria (PC) and Activity Instructions (AI).</li> <li>Must be able to function as a member of a team and be able to work under general supervision.</li> <li>Must be able to work and function in a fast-paced environment.</li> <li>Basic knowledge of computers.</li> <li>Must be able to maintain expected quality levels.</li> <li>Assemble a hanger of molds.</li> <li>Maintain expected quality levels.</li> <li>Have adequate computer skills to enter the data into the computer system and also retrieve it.</li></ul>Job responsibilities and duties may include, but are not limited to, the following:Auto-line Load<ul> <li>Load patterns onto line using light weight manipulator.</li> <li>Input necessary data into computer.</li> <li>Apply latex spray when necessary.</li> <li>Maintain the auto line materials.</li> <li>Help out in other areas as needed.</li></ul>Robot 7<ul> <li>Load patterns.</li> <li>Input necessary data into computer.</li> <li>Apply latex spray when necessary.</li> <li>Maintain the Robot 7 materials.</li> <li>Core-fill or Hand dip as needed.</li> <li>Maintain Primary cabana organization.</li></ul>Robot 8<ul> <li>Pull molds when required out of Primary cabana to load.</li> <li>Input necessary data into computer.</li> <li>Maintain the Robot 8 materials.</li> <li>Apply bracing as needed.</li> <li>Maintain Back up cabana organization.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li></ul>Collar Grind<ul> <li>Unload molds.</li> <li>Pull necessary data out of computer.</li> <li>Carefully remove gasket.</li> <li>Maintain wheelabrator.</li></ul>*Employees are expected to work overtime as needed.Qualifications Basic Qualifications: <ul> <li>High School diploma or GED equivalency is required.&nbsp;</li> <li>WORKKEYS Tests are REQUIRED to be considered for this position. Testing will be conducted at the La Porte WorkOne office. Required Testing: Applied Math, Graphic Literacy, Workplace Documents and Workplace Observation. Candidates MUST pass with a Level 4 or higher on Applied Math, Graphic Literacy, and Workplace Documents and with a Level 2 or higher on Workplace Observation to be considered.</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li> </ul> Preferred Qualifications: <ul> <li>Able to demonstrate 2 years of full-time continuous work experience with the same employer OR 6 months of manufacturing experience.</li> </ul> Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employee is required to execute the following: <ul> <li>Occasional bending, reaching, pushing and pulling when retrieving and moving various items.</li> <li>Lifting intermittently. Typically, assistance would be provided for weights exceeding 35 pounds.</li> <li>Good manual dexterity - position may require more than eight hours daily and more than five days weekly to complete work assignments.</li> <li>Squatting / crouching when retrieving stored items from lower shelves and file cabinets, making equipment / product inspections, etc.</li> <li>Standing approximately 80% of their shift.</li> <li>Clean work areas and maintain a clean work environment; perform 5S cleaning activities as required.</li> </ul> About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Howmet Aerospace

HOURLY PRODUCTION - Monoshell Operator

ResponsibilitiesThe Senior Quality Engineer provides senior leadership and guidance to the organization and peers, acting as a change agent to implement process improvement across the organization in the achievement of an operational excellence environment.&nbsp; This Quality Professional may have a team leader role in respective areas.&nbsp; This is accomplished through application of knowledge in quality systems, driving adherence to disciplined systems and robust processes, and focused standardization of best practices; in conjunction with managing to a cohesive set of key performance metrics that provide an objective perspective on the business operating system health and effectiveness. The Senior Quality Engineer also creates and maintains cross functional relationships needed to foster a proactive engagement culture amongst the business operations team and a productive working relationship with customers.ESSENTIAL FUNCTIONS<ul> <li>Manage Quality Engineers, NDT Level IIIs, Gauge Control, MDM and Quality Technicians.</li> <li>Process improvement leader focused on review, disposition and elimination of material review, concessions, corrective / preventive actions and escapes.</li> <li>Customer advocate (Voice of the customer).</li> <li>Purchase order and specification review leader focused on negotiation of customer requirements, advanced product quality planning and translation of requirements to operator level.</li> <li>Ensure customer verification is complete (i.e. FAIR) and submitted to the customer.</li></ul>JOB RESPONSILITIESJob responsibilities and duties may include, but are not limited to, the following:<ul> <li>Assesses health of the business systems against customer and/or industry standards through an efficient and effective internal audit/corrective and preventative action management system.&nbsp;</li> <li>Be a team player and develop relationships, both internally and externally, to achieve the necessary engagement, influence and customer connections (both internal and external) required.</li> <li>One who is energized by consistently identifying and overcoming challenges and possessing highly developed quantitative, as well as qualitative skills required.</li> <li>Problem Solving and Corrective / Preventive Action skills - Proactive approach (to foresee problems rather than reacting after the event).</li> <li>Ability to multi-task in a demanding environment and to work independently with little to no guidance required.</li> <li>Business acumen (financials, linkage of quality impact to financials, A3 thinking).&nbsp;</li> <li>Possess practical understanding of manufacturing processes in order to objectively and independently analyze problems, communicate effectively and facilitate problem solving activities.</li> <li>Possess production operation knowledge and experience relating to manufacturing, inspection, engineering and customer interaction.</li> <li>Ability to directly link, monitor and improve quality objectives with overall business objectives of the company.</li> <li>Ability to apply problem solving methodology to positively impact business objectives.</li> <li>Consistently demonstrate Howmet values.</li> <li>Experience and proficiency in understanding ISO 9000 and/or AS9100 along with knowledge in Statistical Tools and Techniques, APQP and Measurement System Analysis recommended.</li> <li>Experience in coordinating, developing and executing corrective / preventative /systemic action and process improvement activities.&nbsp;</li> <li>Can effectively work through major and minor issues without getting emotionally disconnected with the issue and what is needed to resolve the issue professionally.&nbsp;</li> <li>Least cost application of customer specs/drawings (no over-processing).</li> <li>Blueprint Reading/customer requirements flowdown.</li> <li>Customer interface and understanding/deployment of customer requirements.</li> <li>Demonstrated Internal auditing skills.</li> <li>Willingness to travel (both domestic and internationally) &lt;25% required.</li> <li>Understanding of non-destructive validation methodology (Visual, x-ray, penetrant, etc.) and Nadcap understanding (if required).</li> <li>Geometric Dimension and Tolerancing (GD&amp;T) understanding.</li> <li>Basic Computer Skills required; Advanced skills can be learned.</li> <li>Understanding of Regulatory requirements.</li> <li>Communication and Presentation Skills required (written, verbal and non-verbal).</li> <li>Ability to communicate with all levels of the organization.&nbsp;</li> <li>Must be able to work with external and internal customers.&nbsp;</li> <li>Ability to read and react to verbal and non-verbal communication while maintaining a level of professionalism.</li> <li>Can effectively listen.</li> <li>Perform other duties as assigned.</li> <li>Complies with all EHS rules required for the work environment.</li></ul>QualificationsBASIC QUALIFICATIONS<ul> <li>Bachelor’s degree in Engineering or related discipline and seven (7) years relevant work experience in a manufacturing environment.</li> <li>Auditing Experience ISP 9001/AS9100 (per AS9014): General Auditor (Internal) – Two (2) audits (total ten (10) audit days) within the past three (3) years or 5 years of relevant audit experience in a manufacturing environment.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>PREFERRED QUALIFICATIONS<ul> <li>Experience and proficiency in understanding ISO 9000 and/or AS9100 along with knowledge in Statistical Tools and Techniques, APQP and Measurement System Analysis.</li> <li>Experience in coordinating, developing and executing corrective / preventative /systemic action and process improvement activities.&nbsp;</li> <li>Demonstrates the highest ethical standards.</li> <li>Makes decisions based on data and fact.</li> <li>Displays business savvy and a bias for action.</li> <li>Is a mentor and coach.</li> <li>Ability to listen and make decisions based on the facts.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Senior Quality Engineer

ResponsibilitiesOur state-of-the-art investment casting facility in La Porte, Indiana is seeking a Controller to join our Finance team.&nbsp;Nestled halfway between South Bend and Chicago, along the shores of Lake Michigan - our facility in La Porte, Indiana supplies jet engine components to some of the most trusted names in the Aerospace industry.&nbsp;This position is responsible for location Financial Reporting, adherence to all GAAP, and Howmet policies and procedures, and practicing risk management and ASAT compliance for all aspects of controls. This position also provides financial leadership and data analysis for development of alternatives and solutions used in management decision making, as well as preparation of budgets and forecasting and corresponding financial accountability.&nbsp;ESSENTIAL FUNCTIONS<ul><li>Preparation and analysis of location P&amp;L results.</li><li>Preparation of budgets and forecasts and analysis to actual performance.</li><li>Review of financial statements and account reconciliations.</li><li>Data analysis for decision making and tracking performance progress.</li><li>Management of Finance, Lot Trace, and Office Services personnel and functions.</li><li>SPA for ASAT Objectives – Analysis, Revenue, and Management.&nbsp;</li><li>Calculations of location key metrics.</li></ul>JOB RESPONSIBILITIES – Job responsibilities and duties may include, but are not limited to, the following:<ul><li>Controller for La Porte Casting, Transportation Services, and Logistic Services.</li><li>SPA for location ASAT.</li><li>Location compliance to all policies and procedures.</li><li>Accountability for validity of location financial statements and representations.</li><li>Management and development of Finance staff.</li><li>Assure accurate, current, and complete information for government contracts.</li><li>Communication of location results to plan and to performance objectives.</li><li>Provide Financial leadership for evaluation of projects, plans, and investments.</li><li>Performs other work-related duties as assigned.</li></ul>QualificationsBASIC QUALIFICATIONS<ul><li>Bachelor's degree in Finance, Accounting, or related field.</li><li>10 years' Finance experience.</li><li>5 years' Controllership experience.</li><li>5 years' manufacturing experience.</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>PREFERRED QUALIFICATIONS<ul><li>MBA or Master's Degree.</li><li>Strong people management skills.</li><li>Strong Excel, Word, and PowerPoint skills.</li><li>Strong analytical capabilities.</li><li>Ability to influence others.</li><li>Knowledge and experience with Oracle systems.</li><li>Strong project management skills.</li><li>Flexibility.</li><li>Multi-tasking capabilities.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Controller

ResponsibilitiesOur state-of-the-art investment casting facility in La Porte, Indiana is seeking a Product Engineer to join our team. Nestled halfway between South Bend and Chicago, along the shores of Lake Michigan - our facility in La Porte, Indiana supplies jet engine components to some of the most trusted names in the Aerospace industry.&nbsp;Job Summary&nbsp;-&nbsp;This position is responsible for the dimensional integrity of an assigned portfolio of investment cast parts.&nbsp;Responsibility includes the design and acquisition of tooling, fixtures, gauges, and dimensional inspection plans necessary to produce parts that consistently meet or exceed our customers’ requirements and expectations.&nbsp;Also, this position will identify and lead continuous improvement activities to reduce cost, improve scrap and rework yields, and improve the overall efficiency of the manufacturing process.Essential Functions<ul> <li>Develops and improves processes of critical and complex aerospace components.</li> <li>Conceives, evaluates and implements problem solving activities, cost reduction initiatives and part/process improvement activities.</li></ul>Job responsibilities and duties may include, but are not limited to, the following:<ul> <li>Investigates and analyzes root cause of external customer escapes. Develops and implements corrective action plans accordingly.</li> <li>Initiates, prepares and validates dimensional qualification packages to meet customer requirements.</li> <li>Conducts meetings and provides technical data to meet customer needs.</li> <li>Promptly responds to manufacturing issues and addresses root cause.</li> <li>Evaluates defects and dimensional integrity of components and determines appropriate actions.</li> <li>Defines and implements control plans and FMEA per customer requirements.</li> <li>Collects, analyzes and prepares statistical data.</li> <li>Conducts design review meetings with customers to ensure production capability on new components.</li> <li>Develops production processes that are efficient and within cost estimates.</li> <li>Evaluates and implements cost reduction activities.</li> <li>Develops scrap and labor costs for cost modeling.</li> <li>Defines, solicits and reviews quotes for tooling and cores.</li> <li>Attends NPI meetings and provides input based on customer specifications for BOM, routings and milestone plans.</li> <li>Defines designs, coordinates construction and validates finished tooling.&nbsp;</li> <li>Collects &amp; analyzes data to appropriately identify, institute, and monitor cost reduction efforts.</li> <li>Collects &amp; analyzes data to appropriately identify, institute, and monitor scrap and rework improvements.</li> <li>Complies with all EHS rules required for the work environment.</li> <li>Performs other duties as assigned.</li></ul>QualificationsBasic Qualifications<ul> <li>Must be currently enrolled and achieve Bachelor's degree from an accredited institution prior to start date.</li> <li>1 year work experience which can include a co-op or internship.</li> <li>Employees must be legally authorized to work in the United States.&nbsp;Verification of employment eligibility will be required at the time of hire.&nbsp;Visa sponsorship is not available for this position.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>Preferred Qualifications<ul> <li>3 years' work experience in an Engineering role.</li> <li>Six Sigma Green or Black Belt certification.</li> <li>Effective oral and written communication skills.</li> <li>Efficient analytical and problem-solving skills.</li> <li>Working knowledge of computer applications (i.e. Microsoft Office products, graphics, and statistical analysis software).</li> <li>Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.</li> <li>Ability to write reports, business correspondence, and procedure manuals.</li> <li>Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.</li> <li>Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.</li> <li>Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.</li> <li>Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Product Engineer - CAMPUS HIRE

ResponsibilitiesJob Summary:Work as a team member to take a rough casting and condition it to the specifications that meet the customer’s requirements by performing metal cleaning, finishing, and dimensional and FPI inspection.Essential Functions:<ul> <li>Must be able to read and interpret Product Criteria (PC) and Activity Instructions (AI).</li> <li>Set up of initial booths(s) for standardization and set up remaining booths to the model booth.</li> <li>Write/edit A.I.’s as required/needed for the department.</li> <li>Perform 5S for the department and own the auditing of 5S.</li> <li>Operate hand grinding tools (both belt and stone).&nbsp;</li> <li>Operate metal cleaning equipment, water flow and sonic equipment.&nbsp;</li> <li>Adjust parts by use of presses, heat or other dimensional tooling.&nbsp;</li> <li>Operate hand sandblast and auto blast units.</li> <li>Prolonged gripping standing or sitting and pushing, pulling and lifting.</li> <li>Moderate length of concentration.</li> <li>Must be able to function as a member of a team and be able to work under general supervision.</li> <li>Must be able to work and function in a fast-paced environment.</li> <li>Basic knowledge of computers.</li> <li>Must be able to maintain expected quality levels.</li></ul>Job Responsibilities:Job responsibilities and duties may include, but are not limited to, the following:To become cross trained in order to perform ALL or MOST OF the duties listed below. When necessary, individual may be required to move castings to designated area or perform other work-related duties as assigned:Metal Cleaner:<ul> <li>Sandblast part by the A.I./P.C.</li> <li>Fill and clean the blasting unit.</li> <li>Inspect castings for possible scrap.</li> <li>Maintain the correct pressure and speed of the blast cabinets by the AI’s and PC’s.</li> <li>Operate glass bead/table clean unit.</li></ul>Metal Finisher:<ul> <li>Finish castings to PC using stones, burrs, belts, templates, and gauges.</li> <li>Sandblast to surface finish.</li> <li>Conduct visual operation and primary inspection of casting.</li> <li>Input data in computer for collection.</li> <li>Use boroscope for inspection and fiber light.</li> <li>Perform decap/deburr operation.</li> <li>Perform sonic operation.</li> <li>Map weld areas.</li> <li>Operate Comco machine.</li> <li>Operate water flow.</li></ul>Dimensional&nbsp;<ul> <li>Use of calipers, micrometer, height gauges, shim stock, scissors, pin, go no/go, step gages, sonic equipment.</li> <li>Input data for record keeping.</li> <li>Adjusting castings for PC compliance.</li> <li>Working with engineering on deviant castings and reworking to engineers' instructions.</li> <li>Datum “C” drilling-Stators Cell Only.</li> <li>Fixture Gauging /Adjusting.</li> <li>Reroute nonconforming castings.</li></ul>*Employees are expected to work overtime as needed.QualificationsBasic Qualifications:<ul> <li>High School diploma or GED equivalency is required.&nbsp;</li> <li>WORKKEYS Tests are REQUIRED to be considered for this position. Testing will be conducted at the La Porte WorkOne office. Required Testing: Applied Math, Graphic Literacy, Workplace Documents and Workplace Observation. Candidates MUST pass with a Level 4 or higher on Applied Math, Graphic Literacy, and Workplace Documents and with a Level 2 or higher on Workplace Observation to be considered.</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>Skills and Abilities:<ul> <li>Read parts to the .0001.</li> <li>Understand gauging and templates.</li> <li>Have finishing skills, (stones, burrs, belts, etc.).</li> <li>Work independent as well as with a team.</li> <li>Able to read and follow written and verbal instruction.</li></ul>Preferred Qualifications:<ul> <li>Experience with the GE210 and PW451.</li> <li>Able to demonstrate 2 years of full-time continuous work experience with the same employer OR 6 months of manufacturing experience.</li></ul>Physical Demands:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Employee is required to execute the following:<ul> <li>Occasional bending, reaching, pushing and pulling when retrieving and moving various items.</li> <li>Lifting approximately 30% of the time. Typically, assistance would be provided for weights exceeding 35 pounds.</li> <li>Good manual dexterity Position may require more than eight hours daily and more than five days weekly to complete work assignments.</li> <li>Sitting in chairs (swivel, padded, and adjustable) for 70% of the workday.</li> <li>Squatting / crouching when retrieving stored items from lower shelves and file cabinets, making equipment / product inspections, etc.</li> <li>Standing intermittently.</li> <li>Visual requirements for this position are close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.</li> <li>Clean work areas and maintain a clean work environment; perform 5S cleaning activities as required.</li></ul>Equipment Used:<ul> <li>Hand grinding tools.</li> <li>Auto gages.</li> <li>Metal cleaning equipment.</li> <li>Sonic Equipment.</li> <li>Template Haze blast.</li> <li>Computers.</li> <li>Glass bead.</li> <li>Boroscope.</li> <li>Belt gun.</li> <li>Comco.</li> <li>Hoists.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

HOURLY PRODUCTION - Metal Cell Operator

ResponsibilitiesOur state-of-the-art investment casting facility in La Porte, Indiana is seeking a Casting Process Owner to join our team! Nestled halfway between South Bend and Chicago, along the shores of Lake Michigan - our facility in La Porte, Indiana supplies jet engine components to some of the most trusted names in the Aerospace industry.&nbsp;This position is responsible for process monitoring and improvement of the superalloy investment casting process. &nbsp;Requirements of the position also include support of manufacturing through process control and improvement initiatives, assumes responsibility for integrity of product, establishes and maintains external &amp; internal customer contacts. &nbsp;Job responsibilities and&nbsp;duties&nbsp;may include,&nbsp;but&nbsp;are not limited&nbsp;to,&nbsp;the&nbsp;following:<ul> <li>Support&nbsp;manufacturing&nbsp;in the processing&nbsp;of&nbsp;castings&nbsp;through all operations.</li> <li>Maintain customer&nbsp;relationships through&nbsp;joint&nbsp;resolution of&nbsp;issues.</li> <li>Specification/work&nbsp;instruction review&nbsp;for&nbsp;mold wrap, mold preheat, casting, and post cast cooling processes.</li> <li>Training and accreditation of&nbsp;departmental&nbsp;casting technicians.</li> <li>Provide&nbsp;direction&nbsp;to&nbsp;manufacturing&nbsp;in&nbsp;the&nbsp;event&nbsp;of&nbsp;interrupted&nbsp;or&nbsp;incomplete&nbsp;processing&nbsp;of material.</li> <li>Provide direction to Maintenance and Instrumentation technicians on acceptable repair and calibration for process acceptance.</li> <li>Statistical&nbsp;analysis&nbsp;to&nbsp;ensure&nbsp;control&nbsp;of&nbsp;currently&nbsp;identified&nbsp;key&nbsp;input&nbsp;variables&nbsp;along&nbsp;with determination of future variables.</li> <li>Maintain and improve process&nbsp;records.</li> <li>Ensure adherence&nbsp;to all process&nbsp;specifications.</li> <li>Performs&nbsp;other&nbsp;work-related duties as&nbsp;assigned.</li> <li>Serves as the quality designee for releasing equipment to production after prescribed testing. &nbsp;</li></ul>QualificationsBasic Qualifications:<ul> <li>A&nbsp;minimum&nbsp;of&nbsp;a&nbsp;Bachelor of Science in Engineering degree.</li> <li>Three years'&nbsp;experience&nbsp;in&nbsp;molten metal processing.</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>Preferred Qualifications:<ul> <li>Materials&nbsp;Science and&nbsp;Engineering or&nbsp;Metallurgical Engineering degree.</li> <li>Experience with precision casting processes.</li> <li>Familiarity with third party quality system accreditation programs (e.g. ISO, Nadcap).</li> <li>Familiarity with nickel&nbsp;based super-alloy&nbsp;metallurgy.</li> <li>Knowledge&nbsp;of&nbsp;MS&nbsp;Office,&nbsp;excellent&nbsp;written&nbsp;&amp;&nbsp;oral&nbsp;communication&nbsp;skills,&nbsp;able&nbsp;to&nbsp;work&nbsp;in&nbsp;a&nbsp;self- directed or team&nbsp;environment&nbsp;&amp; have&nbsp;good organizational skills.</li> <li>Working&nbsp;knowledge&nbsp;of&nbsp;statistical&nbsp;analysis&nbsp;including&nbsp;statistical&nbsp;tools&nbsp;(Mini-Tab,&nbsp;SAS&nbsp;JMP,&nbsp;SAS EG,&nbsp;etc.).</li> <li>Certified in Six&nbsp;Sigma&nbsp;with&nbsp;a&nbsp;minimum&nbsp;of&nbsp;a&nbsp;green&nbsp;belt.</li> <li>Strong&nbsp;analytical&nbsp;abilities.</li> <li>Experience with statistical&nbsp;data analysis.</li> <li>Experience in synchronous&nbsp;manufacturing&nbsp;and Kaizens.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Process Engineer - Casting Process Owner

ResponsibilitiesOur state-of-the-art investment casting facility in La Porte, Indiana is seeking a Casting Process Owner to join our team! Nestled halfway between South Bend and Chicago, along the shores of Lake Michigan - our facility in La Porte, Indiana supplies jet engine components to some of the most trusted names in the Aerospace industry.This position is responsible for process monitoring and improvement of the superalloy investment casting process. Requirement of the position also include support of manufacturing through process control and improvement initiatives, assumes responsibility for integrity of product, establishes and maintains external &amp; internal customer contacts.Job responsibilities and duties may include, but are not limited to, the following:<ul><li>Support&nbsp;manufacturing&nbsp;in the&nbsp;processing&nbsp;of&nbsp;castings&nbsp;through all operations.</li><li>Maintain customer&nbsp;relationships through&nbsp;joint&nbsp;resolution of&nbsp;issues.</li><li>Specification/work&nbsp;instruction review&nbsp;for&nbsp;mold wrap, mold preheat, casting, and post cast cooling processes.</li><li>Training and accreditation of&nbsp;departmental&nbsp;casting technicians.</li><li>Provide&nbsp;direction&nbsp;to&nbsp;manufacturing&nbsp;in&nbsp;the&nbsp;event&nbsp;of&nbsp;interrupted&nbsp;or&nbsp;incomplete&nbsp;processing&nbsp;of material.</li><li>Provide direction to Maintenance and Instrumentation technicians on acceptable repair and calibration for process acceptance.</li><li>Statistical&nbsp;analysis&nbsp;to&nbsp;ensure&nbsp;control&nbsp;of&nbsp;currently&nbsp;identified&nbsp;key&nbsp;input&nbsp;variables&nbsp;along&nbsp;with determination of&nbsp;future variables.</li><li>Maintain and improve process&nbsp;records.</li><li>Ensure adherence&nbsp;to all&nbsp;process&nbsp;specifications.</li><li>Performs&nbsp;other&nbsp;work-related duties as&nbsp;assigned.</li><li>Serves&nbsp;as&nbsp;the&nbsp;quality&nbsp;designee&nbsp;for&nbsp;releasing&nbsp;equipment&nbsp;to&nbsp;production after&nbsp;prescribed&nbsp;testing.</li></ul>QualificationsBasic Qualifications:<ul><li>A minimum of a Bachelor of Schience in Engineering degree.</li><li>1 year experience in molten metal processing.</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>Preferred Qualifications:<ul><li>Materials Schience and Engineering or Metallurgical Engineering degree.</li><li>Familiarity with nickel based super-alloy metallurgy.</li><li>Knowledge of MS Office, excellent written &amp; oral communication skills, able to work in a self- directed or team environment &amp; have good organizational skills.</li><li>Experience with statistical data analysis.</li><li>Experience in synchronous manufacturing and Kaizens.</li></ul>

We are looking for a talented and experienced Civil Engineering professional to join our Water Resources team. The ideal candidate for this role will be a Professional Engineer with experience working on wastewater, drinking water and/or stormwater projects. Project management experience would be a plus for this role. Candidates with a higher level of experience are welcome to apply. Lochmueller Group is a growing firm that is involved in a wide variety of water resources projects for states, municipalities, utilities, regional sewer districts and various private entities. In addition, our Water Resources team may support, and coordinate with, our other business units to assist with various roadway, industrial, and site development projects. For over 40 years, Lochmueller Group has helped communities reinvent their future through thoughtful, actionable planning and design.&nbsp;Our dedication to building a team that demonstrates our corporate values (CARDIA) is what sets us apart: CARDIA: Means “from the heart” – Creativity; Accountability; Respect; Dedication; Integrity; Achievement – that’s what sets us apart!&nbsp; Lochmueller Group provides an excellent workplace culture established by our people who share these values. We are a 100% employee-owned company, and our people are vested in the success and continued development of each other and the firm. This is a great place to build a career and grow with a company that is dedicated to quality and service.&nbsp;<h4>In this position, the candidate will: </h4><ul><li>Work as a project engineer and/or project manager with responsibility for wastewater, drinking water, and stormwater projects.</li><li>May supervise work groups which include engineers and/or technicians.</li><li>Ensure project designs are in conformance with the latest design specifications.</li><li>Perform design quantity computations and checks.</li><li>Plans, schedules, or coordinates the preparation of documents or activities for projects.</li><li>Provide mentorship to junior level staff.</li><li>Understand and work with surveying data provided from survey department.</li><li>Read and interpret schematic and construction plans.</li><li>Apply a variety of specification regulations, policies and standards to assure compliance with various Federal, State, and local rules and regulations.</li><li>Review operational practices to ensure compliance with applicable policies and performance measures.</li><li>Complete other duties as needed.</li></ul><h4>Qualifications for this role:</h4><ul><li>Bachelor’s or Master’s Degree in Civil or Environmental Engineering or other applicable engineering field</li><li>Professional Engineer (PE)</li><li>7+ years of experience in this discipline</li><li>Experience as project engineer or project manager for wastewater, drinking water, and/or stormwater design projects&nbsp;</li><li>Experience with project management and accounting software is helpful</li><li>Proficiency with Microsoft Office products including: Excel, Word, and PowerPoint</li><li>Strong written and verbal communication skills</li><li>Ability to work individually or as part of a team</li></ul><h4>What we offer: </h4><ul><li>Employee Stock Ownership Plan (ESOP) – Become an employee-owner!</li><li>Availability of flexible work hours and part-time telecommuting</li><li>Rich coverage for major medical insurance</li><li>401(k) plan with company match</li><li>Basic life insurance (with option for additional voluntary life insurance)</li><li>Short-Term and Long-Term disability insurance</li><li>Generous vacation and sick leave</li><li>Student loan repayment benefit</li></ul>Lochmueller Group is an Equal Opportunity/Affirmative Action employer. Lochgroup fully supports and maintains compliance with all state, federal, and local regulations. All qualified applications will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, protected veteran status, genetic information, or any other category protected by federal, state, and local laws.

Lochmueller Group

Water Resources Project Engineer

We are looking for an experienced Water Resources Engineer to lead our team in Northern Indiana. This position could be based in any of our Northern Indiana locations. (South Bend, Mishawaka, Fort Wayne, and soon to be Merrillville, IN) The ideal candidate for this role will be a Professional Engineer with substantial experience managing wastewater, drinking water and/or storm water projects. This is a great opportunity for someone with strong leadership skills to advance into a department manager role, or for someone who already has strong project management and team leadership skills to further their career. &nbsp; Lochmueller Group is a regional engineering consulting firm with an emphasis on infrastructure.&nbsp;&nbsp;We provide multi-disciplined services for a variety of public agencies and private entities, including transportation design; water resources design; environmental analysis &amp; permitting; construction engineering &amp; inspection; traffic engineering &amp; transportation planning; surveying; and land acquisition &amp; appraisal. Our transportation design team offers a variety of services, but most of our work involves roadway and bridge design for various local public agencies and state DOT’s. <h4>Key Responsibilities:</h4><ul><li>Department Leadership: Leads and manages a team or teams, including engineers and technicians. Provides technical guidance and mentorship to junior team members. Fosters a positive workplace culture and ensure professional growth and development of department team members. Guides the team to deliver high-quality results. Conducts performance appraisals. Identifies staffing needs and actively participate in recruiting and hiring. Ensures effective resource allocation.</li><li>Project Management: Ensures the department’s project deliverables are completed on time and within budget. Plasn, organizes, and directs department activities, including project management, design, and construction oversight.&nbsp; Provides leadership in the planning, design, and execution of major projects. Serves as a project manager on various&nbsp; projects. Perform QC/QA as needed. </li><li>Client and Stakeholder Relations: Develops new client relationships and seeks out opportunities for new business. Maintains strong relationships with existing clients. Coordinates with clients, stakeholders, and regulatory agencies to ensure compliance with regulations and specifications. </li><li>Fiscal/Budgetary Performance: Actively works to improve productivity and efficiency, and addresses negative project variances. Collaborates on budget development, implement cost control measures, and ensure accurate financial reporting. </li></ul><h4>Mandatory Qualifications:</h4><ul><li>Bachelor’s or master’s degree in Civil Engineering. </li><li>Professional Engineer (PE). </li><li>Demonstrated success in managing large and/or complex Water Resources engineering projects.</li><li>Proficiency with relevant engineering software and tools for design and analysis.</li><li>Demonstrated expertise in personnel management and leadership with a strong track record of guiding teams to deliver high-quality results. </li><li>Strong client management capabilities with proven ability to develop and maintain new client relationships. &nbsp; </li><li>Valid Driver's License</li></ul><h4>Preferred Qualifications:</h4><ul><li>Exceptional organizational skills.</li><li>Proficiency with Microsoft Office products including: Excel, Outlook, Word, and PowerPoint. </li><li>Strong written and verbal communication skills.</li><li>15 years of experience in water resources engineering. </li><li>Note: While the position typically requires 15 years of experience in water resources engineering, we are open to considering candidates with fewer years of experience if they possess the right skills and relevant working experience. We value practical expertise and are willing to assess qualifications on a case-by-case basis.</li></ul><h4>What we offer:</h4><ul><li>Employee Stock Ownership Plan (ESOP) – Become an employee-owner!</li><li>Availability of flexible work hours and part-time telecommuting</li><li>Rich coverage for major medical insurance</li><li>401(k) plan with company match</li><li>Basic life insurance (with option for additional voluntary life insurance)</li><li>Short-Term and Long-Term disability insurance</li><li>Generous vacation and sick leave</li><li>Student loan repayment benefit</li></ul>For over 40 years, Lochmueller Group has helped communities reinvent their future through thoughtful, actionable planning and design.&nbsp;Our dedication to building a team that demonstrates our corporate values (CARDIA) is what sets us apart: CARDIA: Means “from the heart” – Creativity; Accountability; Respect; Dedication; Integrity; Achievement – that’s what sets us apart!&nbsp; Lochmueller Group provides an excellent workplace culture established by our people who share these values. We are a 100% employee-owned company, and our people are vested in the success and continued development of each other and the firm. This is a great place to build a career and grow with a company that is dedicated to quality and service.&nbsp; Lochmueller Group is an Equal Opportunity/Affirmative Action employer. Lochgroup fully supports and maintains compliance with all state, federal, and local regulations. All qualified applications will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, protected veteran status, genetic information, or any other category protected by federal, state, and local laws.

Water Resources Department Manager

Lochmueller Group is seeking an experienced professional civil engineering leader to serve as the Roadway Team Leader for our Roadway Design team in the South Bend / Mishawaka region.&nbsp;&nbsp;&nbsp;About this role:&nbsp; The Roadway Engineering Team Leader plays a pivotal role in driving the success of the firm's transportation projects by leading a team of engineers and design technicians through all phases of project execution. This role ensures technical excellence, quality control, and timely delivery of complex roadway design projects for DOT and local agency clients. By fostering a collaborative team environment and mentoring junior staff, the Team Leader strengthens the firm’s internal capabilities while enhancing client satisfaction through strategic relationship management. Their leadership not only ensures successful project outcomes but also contributes to the firm’s long-term growth and reputation in the transportation engineering sector.&nbsp; About the company:&nbsp;&nbsp; Lochmueller Group is a growing engineering consulting firm with an emphasis on infrastructure and recognized as an Indiana Best Place to Work.  We provide multi-disciplined services for a variety of public agencies and private entities, including transportation design; water resources design; environmental analysis &amp; permitting; construction engineering &amp; inspection; traffic engineering &amp; transportation planning; surveying; and land acquisition &amp; appraisal. Our transportation design team offers a variety of services, but most of our work involves roadway, highway, and bridge design for various local public agencies and the Indiana Department of Transportation (INDOT).&nbsp;&nbsp; For over 45 years, Lochmueller Group has helped communities reinvent their future through thoughtful, actionable planning and design. Our dedication to building a team that demonstrates our corporate values (CARDIA) is what sets us apart:&nbsp; CARDIA: Creativity; Accountability; Respect; Dedication; Integrity; Achievement&nbsp;&nbsp; Lochmueller Group provides an excellent workplace culture established by our people who share these values. We are a 100% employee-owned company, and our people are invested in the success and continued development of each other and the firm. This is a great place to build a career and grow with a company that is dedicated to quality and service.&nbsp;&nbsp;<h4>Key responsibilities will include: </h4><ul><li>Team Leadership: Leading a team that may consist of engineers and design technicians. Providing mentorship and guidance to junior-level engineers and other team members to aid in their professional development. Fostering a collaborative and positive work environment among the team.&nbsp;&nbsp;</li><li>Project Management: Serving as a project manager for INDOT and local agency roadway design projects. Overseeing and participating in project execution from initiation to completion. Monitoring project progress, identifying potential risks, and implementing mitigation strategies as needed.&nbsp;&nbsp;</li><li>Project Delivery &amp; Quality: Performing quality checks on work performed by project team members. Providing leadership in the planning, design, and execution of major projects. Preparing project documents and designs, conducting analyses, interpreting data, and planning and coordinating the engineering work to ensure timely and successful project delivery. Reviewing and approving project deliverables, including drawings and specifications. Serving as a technical expert in Roadway design. Identifying opportunities for process improvement and implementing measures to enhance efficiency, productivity, and quality of work. •Client Relationship Management: Maintaining and enhancing relationships with clients, ensuring a high level of service, communication, and client satisfaction. Collaborating with senior management on strategic planning and assisting with business development. Preparing proposals and/or funding applications.&nbsp;&nbsp;</li><li>As additional opportunities present themselves, this role may also perform other duties and responsibilities.&nbsp;&nbsp;</li></ul><h4>Qualifications for this role: </h4><ul><li>Bachelor’s or Master’s Degree in Civil Engineering or a related field.&nbsp;&nbsp;</li><li>Professional Engineer (PE).&nbsp;&nbsp;</li><li>Typically requires 12+ years of relevant experience in engineering.&nbsp;&nbsp;</li><li>Demonstrated leadership capabilities.&nbsp;&nbsp;</li><li>Demonstrated ability to maintain and enhance client relationships.&nbsp;&nbsp;</li><li>Experience with project management and accounting software.&nbsp;&nbsp;</li><li>Exceptional organization skills.&nbsp;&nbsp;</li><li>Proficiency with relevant engineering software and tools for design, project management, and analysis.&nbsp;&nbsp;</li><li>Proficiency with Microsoft Office products including: Teams, Excel, Outlook, Word, and PowerPoint.&nbsp;&nbsp;</li><li>Strong written and verbal communication skills.&nbsp;&nbsp;</li><li>Valid Driver's License&nbsp;</li></ul><h4>What we offer: </h4><ul><li>Health &amp; Wellness: Medical, Dental, Vision, Disability, and Basic Life Insurance w/ option for additionalVoluntary Life Insurance)&nbsp;</li><li>Work/Life Balance: Vacation, Holidays, Sick Leave, Parental Leave, Flexible Scheduling &amp; Telecommuting Opportunities)&nbsp;</li><li>Wealth-Building: 401k w/ company match, Student Loan Repayment Benefit, Employee Stock Ownership Plan (ESOP), Competitive Compensation Package&nbsp;</li><li>Professional Benefits: Professional Membership Dues, Career &amp; Educational Development&nbsp;</li></ul>Lochmueller Group is an Equal Opportunity/Affirmative Action employer. Lochgroup fully supports and maintains compliance with all state, federal, and local regulations. All qualified applications will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, protected veteran status, genetic information, or any other category protected by federal, state, and local laws.&nbsp;

51 Full Time Jobs in La Porte, IN 46350, USA