field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

West Covina, CA – Seeking Emergency Medicine Advanced ProvidersBecome a Valued Member of Your Emergency TeamAs an Advanced Provider, you play a critical role in our mission to improve lives in the Emergency Department and are a valued member of the full care team. At Vituity we know the impact you can have.Join the Vituity Team. At Vituity we’ve cultivated an environment where passion thrives, and success comes through shared purpose. We were founded in a culture that values team accomplishments more than individual achievements, an approach we call “culture of brilliance.” Together, we leverage our strengths and experiences to make a positive impact in our local communities. We foster this through shared goals and helping our colleagues succeed, and we also understand the importance of recognition, taking the time to show appreciation and gratitude for a job well done.Vituity Locations: Vituity has opportunities at 475 sites across the country, serving 9 million patients a year. With Vituity, if you ever need to move, you can take your job with you.The Opportunity<ul><li>Seeking Emergency Department/Urgent Care Center physician assistants and nurse practitioners.</li><li>Previous ED experience preferred.</li><li>New grads encouraged to apply.</li><li>Current national certification, DEA, ACLS, and PALS are required.</li></ul>The Practice – A Global SystemQueen of the Valley Hospital – West Covina, CA<ul><li>Part of Citrus Valley Health Partners and a faith-based not-for-profit hospital located in West Covina.</li><li>Level III Trauma Center, EDAP Center, and Comprehensive Stroke Center.</li><li>263-bed facility with a 24-bed Emergency Department.</li><li>Annual volume of 64,000 with a 16% admit rate.</li><li>Vituity scribe support available.</li><li>Renowned for its family-centered maternity services and level IIIB Newborn ICU.</li></ul>Inter-Community Hospital – Covina, CA<ul><li>Level III Trauma Center, STEMI Receiving Center, and ROSC.</li><li>252-bed facility with a 26% admit rate.</li><li>Vituity scribe support available.</li><li>Specializing in cardiac care, Inter-Community Hospital offers the only open-heart surgery program in East San Gabriel Valley.</li></ul>Foothill Presbyterian Hospital – Glendora, CA<ul><li>Foothill Presbyterian Hospital is a fully accredited not-for-profit hospital and part of Citrus Valley Health Partners.</li><li>Level III Trauma Center and Primary Stroke Center.</li><li>Annual volume of 37,200 with a 13% admit rate.</li><li>Vituity scribe support available.</li></ul>The Community<ul><li>West Covina, California, is a dynamic city in the San Gabriel Valley that combines suburban comfort with easy access to Southern California attractions.</li><li>Known for its community-centric vibe, West Covina boasts landmarks like the Plaza West Covina, a bustling shopping and dining hub.</li><li>The city is also home to scenic parks such as Galster Wilderness Park, ideal for hiking and picnicking.</li><li>Seasonal weather features warm summers and mild winters, making outdoor activities enjoyable year-round.</li><li>Its central location allows residents to explore nearby Los Angeles attractions, the San Gabriel Mountains, and Orange County beaches with ease.</li><li>West Covina hosts a variety of cultural events and maintains a strong sense of community, offering excellent schools and family-friendly amenities.</li></ul>Benefits &amp; Beyond*Vituity cares about the whole you. With our comprehensive compensation and benefits package, we are mindful of what matters most, and support your needs of today and your plans for the future.<ul><li>Superior health plan options</li><li>Dental, Vision, Life and AD&amp;D coverage, and more</li><li>Top Tier 401(k) retirement savings plans that offers a $1.20 match for every dollar up to 6%</li><li>Variety of Pre-Tax Savings Accounts including HSA, FSA, Dependent Care and Commuter Benefits</li><li>Time Off when you need it: Start with 4 weeks PTO annually and increase to 6 weeks with tenure, plus generous sick leave</li><li>Flexible scheduling for work/life balance</li><li>Yearly annual cash bonus</li><li>Professional Expense Reimbursement for medical staff dues, states licenses, DEA license, and national recertification fees</li><li>Up to $1,500 annual allowance for medical education courses and professional memberships</li><li>Student Loan Refinancing Discounts</li><li>EAP, travel assistance and identify theft included</li><li>Free education opportunities for personal and professional growth</li><li>Several wellness programs that focus on provider wellbeing and health</li><li>Purpose-driven culture focused on improving the lives of our patients, communities, and employees</li></ul>Salary range for this role is $58 - $84 per hour. Please speak with a recruiter for more information.We are unified around the common purpose of transforming healthcare to improve lives and we believe everyone has a role to play in that. When we work together across sites and specialties as an integrated healthcare team, we exceed the expectations of our patients and the hospitals and clinics we work in. If you are looking to make a difference, from clinical to corporate, Vituity is the place to do it. Come grow with us.Vituity does not discriminate against any person on the basis of race, creed, color, religion, gender, sexual orientation, gender identity/expression, national origin, disability, age, genetic information (including family medical history), veteran status, marital status, pregnancy or related condition, or any other basis protected by law. Vituity is committed to complying with all applicable national, state and local laws pertaining to nondiscrimination and equal opportunity.*Benefits for part-time and per diem vary. Please speak to a recruiter for more information.Applicants only. No agencies please.

Vituity

Physician Assistant - Emergency Medicine - Queen of the Valley Hospital

At West Coast University, we share a passion for students and transforming healthcare education! As an associate for a certified Great Place to Work, you will&nbsp;join a collaborative, student-centric culture valuing academic integrity, mutual respect, student learning, service, responsiveness, innovation, diversity, and stewardship.&nbsp; As a part of this team, you will guide students to do more than change their own lives – you will help change the lives of every patient they care for throughout their career.You will make an impact by:&nbsp;<ul><li>Providing professional leadership and support for clinical faculty; serving as a mentor and facilitator for faculty assigned; and enabling an environment which fosters creativity, responsiveness, and self-responsibility.</li><li>Mentoring appropriate team leads to ensure they are provided with support and mentoring in the clinical setting for the Nursing program.&nbsp;</li><li>Managing the hiring, onboarding, evaluation, and continued support for clinical faculty.</li><li>Resolving conflicts/problems with faculty in the clinical setting in collaboration with clinical team.</li></ul>Participating in curriculum development and coordination, while determining teaching assignments using a blended instructional approach combining face-to-face instruction with on-line instruction (as applicable), selection of faculty, and selection/coordination of program specific external facilities and instruction.Your Experience Includes:<ul><li>A minimum of one year’s experience teaching courses related to nursing. One to two years’ prior experience working with or in clinical sites, placing students, and coordinating related documents. In addition, possesses the following qualifications:</li><li>Didactic and/or clinical teaching experience.</li><li>Experience in administration/management.&nbsp;</li><li>Knowledgeable of medical community and established relationships with its professional members preferred.&nbsp;</li><li>Leadership knowledge in the program field to cultivate a learner-centered environment and to foster excellence.</li><li>Knowledge and evidence of strong supervisory and management skills applicable to specialized program area.&nbsp;</li><li>Knowledge of state, federal and local laws/regulations relating to programs, governmental compliance, and other regulatory standards such as Board of Registered Nursing (BRN) or other nursing accrediting agencies, WASC, and other accreditation standards.&nbsp;</li></ul>Education:<ul><li>Master’s degree or higher from an accredited college or university which includes course work in nursing, education or administration required.</li></ul>Licenses/Certifications:<ul><li>Current unencumbered Registered Nurse License preferred.</li><li>Eligible for approval for the role of Nursing Instructor in alignment with the state’s faculty approval guidelines (Boards of Registered Nursing) required.</li></ul>Do you want a career that allows you to make a difference in other people’s lives? Discover what it means to truly believe in the work that you do at West Coast University.At West Coast University, we have the privilege of educating students seeking careers in healthcare and guide them through their transformational journey from student to caregiver. Our associates are united behind that purpose and share a deep commitment to our values of teamwork, collegiality, transparency, and a student-centric approach to all we do. This focus creates an aligned, nimble, and consensus-driven culture that is solution-oriented and supports our associates’ professional growth.West Coast University is proud to be an equal opportunity employer. We embrace diversity and are dedicated to creating an inclusive environment for all associates.

West Coast University

Manager, Clinical Faculty

ResponsibilitiesThe person in this position will be part of the Machine building team that is responsible for design and manufacturing of new and rebuilt machines to support HFS facilities worldwide. This group is responsible for the implementation of projects to upgrade existing equipment and systems, coordinates and supports custom machine building projects and assists in the selection, procurement and installation of our new custom equipment to support HFS manufacturing process. This group also supports the day-to-day operations by acting as a resource for skilled trades and contracted services.The position is located at the Fullerton plant two facility, responsibilities will include, but not limited to:<ul><li>Support assigned plant and provides backup support to other plants</li><li>Controls projects and HMI programming &amp; support of PLC Based Systems</li><li>Power Distribution Management.</li><li>Infrastructure support and modernization.</li><li>Support capital project management&nbsp;</li><li>Responsible for managing contracted project work.</li><li>Hands on position to include trouble shooting, wiring, programming and assembly of new and rebuilt custom designed machines for internal use.</li></ul>QualificationsBasic Qualifications:<ul><li>3- 5 years of experience</li><li>Bachelor’s degree in electrical engineering or electrical engineering technology from an accredited institution, or an equivalent combination of education and/or experience.</li><li>Previous electrical co-op, internship experience in a manufacturing environment.</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>Preferred Qualifications<ul><li>PLC programming experience</li><li>HMI programming experience</li><li>Experience with Allen Bradley PLC &amp; RSLogix or RS Logics 500/Studio 5000</li><li>Knowledge of Electrical distribution systems for voltage below 600V</li><li>Proficient user of SolidWorks, AutoCAD Electrical and/or SolidWorks Electrical</li><li>Familiar with industrial robots (e.g., FANUC or similar) is a plus</li><li>Familiar with dataPARC, LabVIEW, or related tools is a plus</li><li>Design and build panels</li></ul>Benefits/Salary:&nbsp;The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location.&nbsp;The salary range for this position is $75000 to $95000.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutHowmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

Howmet Aerospace

Industrial Automation Technician

Company Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The Operator in training maintains wastewater treatment, processing, disposal and testing equipment in water/wastewater treatment facilities to purify water to meet permit and operational requirements under direct supervision of a Grade III Operator. Primary Duties/Responsibilities: <ul><li>Monitor operating conditions, meters, and gauges.</li><li>Collect and test water and sewage samples.</li><li>Record meter and gauge readings and operational data.</li><li>Operate equipment to purify and clarify water or to process or dispose of waste.</li><li>Clean and maintain equipment, tanks, filter beds, and other work areas.</li><li>Inspect all equipment on a regular basis.</li><li>Follow U.S. Environmental Protection Agency regulations.</li><li>Follow safety standards.</li></ul> Work Environment: <ul><li>Spends 100% of the time in an operations environment.</li><li>May need to work outside in inclement weather conditions and drive company vehicle to perform duties.</li><li> Possible Work Hazards : May be exposed to possible operations hazards including fumes, toxic and caustic chemicals, heavy machinery, high pressure, hot or cold work environment temperatures, slippery surfaces, water hazards and electrical equipment.</li></ul> Qualifications Education/Experience/Background: <ul><li>High School education or GED with the ability to communicate effectively in writing and orally (operational, process, safety and quality instructions). Must have the ability to perform basic math equations.</li></ul> Knowledge/Skills/Abilities: <ul><li>Must demonstrate proficiency in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, gas detectors, confined space equipment, etc.)</li><li>Must consistently demonstrate the ability to operate assigned machines and equipment meeting or exceeding processing and quality targets under general supervision.</li><li>Must demonstrate ability to efficiently operate equipment such as pumps, engines, centrifuge, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed, odor control, disinfection equipment, sludge processing filters, belt presses, and measuring/control devices, testing equipment and material handling equipment.</li><li>Must have the ability to diagnose process and mechanical problems in single or multiple unit processes, troubleshoot basic equipment and take corrective action within policy and procedure limitations.</li><li>Must demonstrate a working ability to use computer programs for process control.</li><li>Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily.</li><li>Must be able to respond to emergency calls as needed and work extended hours to accommodate site needs.</li></ul> Required Certification/Licenses/Training: <ul><li>Typically holds or is working toward a grade I wastewater treatment certificate.</li><li>Must possess a valid CA driver's license and a safe driving record.</li><li>Must be able to pass a drug screen and criminal background check.</li></ul> Physical Requirements: <ul><li>Amount of time spent - Standing 25%, Walking 75% for as many as five miles per shift.</li><li>While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear.</li><li>The employee is occasionally required to stoop, kneel, or crouch and enter confined spaces.</li><li>May be required to use ladders or stairs.</li><li>The employee must lift and/or move up to 50 pounds (occasionally 60 pounds).</li><li>Specific vision abilities required by this job include close vision, distance vision, color vision, and ability to adjust focus. Requires close visual observation to detect process non-conformance and machine malfunction.</li></ul> Additional Information Pay Rate: $27.135 per hour. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Wastewater Operator in Training

ResponsibilitiesThis position is involved directly in the inspection of product after final processing.&nbsp; This position procures samples for dimensional inspection of aerospace parts to ensure conformity to customer drawing requirements.&nbsp;This position requires review of the customer drawing, measurement of the part using various types of calibration gages such as a micrometer, caliper, comparator, Keyence IM, drop gage, height gage, Go/No-Go gages, etc. Use of precision inspection tools and equipment, ability to read blueprints and procedures are required in the daily activities to ensure acceptance of product to specifications and requirements. Involvement in other inspections, such as, but not limited to, creating non-conforming material reports, receiving inspection and 3rd&nbsp;party certificate of conformance review.Knowledge and Skills:<ul> <li>Performing appropriate sampling plan per customer requirements</li> <li>Dimensional Inspection and Acceptance</li> <li>Visual Inspection and Acceptance</li> <li>Receiving Inspection and Acceptance</li> <li>Review of 3rd&nbsp;Party Certification of Compliance Documentation</li> <li>Supporting Quality in the recall of gages and tools</li> <li>Review of Manufacturing Router</li> <li>Prepare quality documentation including but not limited to dimensional inspection reports and logbooks for product acceptance&nbsp;</li> <li>Prepare non-conformance reports for Quality and Engineering evaluation&nbsp;</li> <li>Use hand tooling such as micrometers, microscopes, calipers, and thread gages</li> <li>Use sampling plans, drawings, work instructions, industry standards and specification to verify conformance of product acceptance.&nbsp;</li> <li>Other duties and/or responsibilities may be performed as part of cross-training or employee development plan.</li> <li>Basic computer skills for entering and accessing databases and spreadsheets</li></ul>QualificationsBasic Qualifications:<ul> <li>Three- Five years related quality experience or training in accordance with the defined skills training matrix progression; or equivalent combination of education and experience.</li> <li>Prior experience in a Quality Inspector</li> <li>Ability to read and interpret documents such as safety rules, operating instructions, and procedures manuals&nbsp;</li> <li>Ability to write routine reports and correspondence&nbsp;</li> <li>Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratio, and percent.&nbsp;</li> <li>Ability to apply common sense understanding to carry out detailed written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.&nbsp;</li> <li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>Work EnvironmentThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts.The noise level in the work environment is usually moderate, however, it may be occasionally loud enough where hearing protection is required.Work hours – 5 days, 8 hours a day, with overtime to meet the demands of the job.&nbsp;Benefits/Salary:The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. The salary range for this position is $23.86 to $40.57 per hourAbout us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Quality Tech IV, 2nd Shift

ResponsibilitiesThis position is involved directly in the inspection of product after final processing.&nbsp; This position procures samples for dimensional inspection of aerospace parts to ensure conformity to customer drawing requirements.&nbsp;This position requires review of the customer drawing, measurement of the part using various types of calibration gages such as a micrometer, caliper, comparator, Keyence IM, drop gage, height gage, Go/No-Go gages, etc. Use of precision inspection tools and equipment, ability to read blueprints and procedures are required in the daily activities to ensure acceptance of product to specifications and requirements. Involvement in other inspections, such as, but not limited to, creating non-conforming material reports, receiving inspection and 3rd&nbsp;party certificate of conformance review.Knowledge and Skills:<ul> <li>Performing appropriate sampling plan per customer requirements</li> <li>Dimensional Inspection and Acceptance</li> <li>Visual Inspection and Acceptance</li> <li>Receiving Inspection and Acceptance</li> <li>Review of 3rd&nbsp;Party Certification of Compliance Documentation</li> <li>Supporting Quality in the recall of gages and tools</li> <li>Review of Manufacturing Router</li> <li>Prepare quality documentation including but not limited to dimensional inspection reports and logbooks for product acceptance&nbsp;</li> <li>Prepare non-conformance reports for Quality and Engineering evaluation&nbsp;</li> <li>Use hand tooling such as micrometers, microscopes, calipers, and thread gages</li> <li>Use sampling plans, drawings, work instructions, industry standards and specification to verify conformance of product acceptance.&nbsp;</li> <li>Other duties and/or responsibilities may be performed as part of cross-training or employee development plan.</li> <li>Basic computer skills for entering and accessing databases and spreadsheets</li></ul>QualificationsBasic Qualifications:<ul> <li>Three years related quality experience or training in accordance with the defined skills training matrix progression; or equivalent combination of education and experience.</li> <li>Prior experience in a Quality Inspector</li> <li>Ability to read and interpret documents such as safety rules, operating instructions, and procedures manuals&nbsp;</li> <li>Ability to write routine reports and correspondence&nbsp;</li> <li>Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratio, and percent.&nbsp;</li> <li>Ability to apply common sense understanding to carry out detailed written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.&nbsp;</li> <li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>Work EnvironmentThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts.The noise level in the work environment is usually moderate, however, it may be occasionally loud enough where hearing protection is required.Work hours – 5 days, 8 hours a day, with overtime to meet the demands of the job.&nbsp;Benefits/Salary:The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. The salary range for this position is $21.17 to $35.99 per hourAbout us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutHowmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

Quality Inspector III - Second Shift

Company Description Veolia is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Water Tech brings together a dedicated team of experienced professionals committed to tackling the world's most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description The Maintenance Technician will perform proper diagnosis of any malfunctioning machinery, general repairs, installing new equipment and systems and preventative maintenance program on all assigned machinery as directed by supervisor Key Characteristics <ul><li>Ability to work independently with minimal supervision</li><li>Computer proficient</li><li>Initiative</li><li>Problem solving skills</li><li>Reliable and thorough</li></ul> Duties &amp; Responsibilities <ul><li>Follow good housekeeping practices by keeping maintenance and tool storage area neat and clean as well as timely cleanup of work area after each job is completed</li><li>Install new equipment or rearrange existing equipment</li><li>Is available on call for emergency repairs as needed to keep plant in good running order</li><li>Maintain preventative maintenance records and perform preventative maintenance on plant and road equipment</li><li>Other duties as assigned</li></ul> Qualifications Knowledge, Skills &amp; Abilities Preferred: <ul><li>Electrical panel board experience</li><li>Motor Controls experience</li><li>Positive displacements pump repair experience</li><li>Trade school experience for electrical, plumbing, carpentry, and/or mechanical repair is highly desired</li></ul> Education &amp; Experience Required <ul><li>High School Diploma, G.E.D., Home School Certification, or international equivalent to High School Diploma</li><li>Minimum of 1 year of PVC plumbing, OR mechanical repair and maintenance work experience or training</li></ul> Preferred: <ul><li>At least 1 year of Electrical install, repair, and maintenance work experience to include electronic troubleshooting, PLC programming, and 480V 3 Phase electrical repair and maintenance experience</li><li>Electrical Certification</li></ul> Working Conditions <ul><li>Travel for field repair and install if needed</li><li>Ability and willingness to perform physical duties such as lifting, climbing, working at elevated heights, and manual dexterity</li><li>Ability and willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities</li></ul> Additional Information At Veolia, we realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We're an organization that champions diversity and inclusion at every rung of the ladder and are proud to be an equal opportunity workplace. Because our people are our greatest assets, we also offer competitive compensation and benefits that include: • Compensation - The salary range is tied to the market for similarly benchmarked roles. The range is not an absolute, but a guide, and offers will be based on the individual candidate's knowledge, skills, experience, and market conditions, as well as internal peer equity. Depending upon all the preceding considerations for the final selected individual candidate, the offer may be lower or higher than the stated range: $27-32/hr usd • Medical, Dental, &amp; Vision Insurance Starting Day 1! • Life Insurance • Paid Time Off • Paid Holidays • Parental Leave • 401(k) Plan - 3% default contribution plus matching! • Flexible Spending &amp; Health Saving Accounts • AD&amp;D Insurance • Disability Insurance • Tuition Reimbursement Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law. ****Applicants are required to be eligible to lawfully work in the U.S. immediately; employer will not sponsor applicants for U.S. work authorization (e.g. H-1B visa) for this opportunity**** Water Tech does not accept unsolicited resumes from external recruiting firms. All vendors must have a current and fully executed MSA on file before submitting candidates. Any unsolicited resumes and candidate profiles will be deemed the property of Water Tech, and no fee will be due. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

Maintenance Technician

Redlands, CA – Seeking Emergency Medicine Advanced ProvidersBecome a Valued Member of Your Emergency Team As an Advanced Provider, you play a critical role in our mission to improve lives in the Emergency Department and are a valued member of the full care team. At Vituity we know the impact you can have.Join the Vituity Team. At Vituity we’ve cultivated an environment where passion thrives, and success comes through shared purpose. We were founded in a culture that values team accomplishments more than individual achievements, an approach we call “culture of brilliance.” Together, we leverage our strengths and experiences to make a positive impact in our local communities. We foster this through shared goals and helping our colleagues succeed, and we also understand the importance of recognition, taking the time to show appreciation and gratitude for a job well done.Vituity Locations: Vituity has opportunities at 475 sites across the country, serving 9 million patients a year. With Vituity, if you ever need to move, you can take your job with you.The Opportunity<ul type="disc"><li>Seeking Emergency Department/Urgent Care Center physician assistants and nurse practitioners.</li><li>Previous ED/UCC experience preferred.</li><li>New grads welcome to apply.</li><li>Current national certification, DEA, and ACLS are required.</li><li>Current CA state license is a plus.</li></ul>The PracticeRedlands Community Hospital – Redlands, California<ul type="disc"><li>Level III Trauma Center.</li><li>21-bed Emergency Department.</li><li>An average of 3 patients per hour and an 18% admit rate.</li><li>Vituity scribe support available.</li></ul>The Community<ul type="disc"><li>Redlands, California, nestled in San Bernardino County, blends historic charm with a modern lifestyle, making it a delightful place to work and call home.</li><li>Known as the “Jewel of the Inland Empire,” its tree-lined streets and historic architecture, like the A.K. Smiley Public Library, exude timeless beauty.</li><li>The city hosts vibrant cultural events, including the Redlands Bowl Summer Music Festival, and boasts unique attractions like the Lincoln Shrine.</li><li>Outdoor enthusiasts enjoy nearby San Bernardino Mountains, Big Bear Lake, and Joshua Tree National Park, while Disneyland and Los Angeles are within a short drive.</li><li>Redlands offers a family-friendly community, excellent schools, and diverse dining and shopping options.</li><li>Its Mediterranean climate brings warm summers and mild winters.</li><li>Located near major freeways, Redlands provides easy access to Southern California’s best, all while maintaining a tranquil, close-knit atmosphere.</li></ul>Benefits &amp; Beyond*Vituity cares about the whole you. With our comprehensive compensation and benefits package, we are mindful of what matters most, and support your needs of today and your plans for the future.<ul type="disc"><li>Superior health plan options</li><li>Dental, Vision, Life and AD&amp;D coverage, and more</li><li>Top Tier 401(k) retirement savings plans that offers a $1.20 match for every dollar up to 6%</li><li>Variety of Pre-Tax Savings Accounts including HSA, FSA, Dependent Care and Commuter Benefits</li><li>Time Off when you need it: Start with 4 weeks PTO annually and increase to 6 weeks with tenure, plus generous sick leave</li><li>Flexible scheduling for work/life balance</li><li>Yearly annual cash bonus</li><li>Professional Expense Reimbursement for medical staff dues, states licenses, DEA license, and national recertification fees</li><li>Up to $1,500 annual allowance for medical education courses and professional memberships</li><li>Student Loan Refinancing Discounts</li><li>EAP, travel assistance and identify theft included</li><li>Free education opportunities for personal and professional growth</li><li>Several wellness programs that focus on provider wellbeing and health</li><li>Purpose-driven culture focused on improving the lives of our patients, communities, and employees</li></ul>Salary range for this role is $66 per hour depending on experience. Please speak with a recruiter for more information.We are unified around the common purpose of transforming healthcare to improve lives and we believe everyone has a role to play in that. When we work together across sites and specialties as an integrated healthcare team, we exceed the expectations of our patients and the hospitals and clinics we work in. If you are looking to make a difference, from clinical to corporate, Vituity is the place to do it. Come grow with us.Vituity does not discriminate against any person on the basis of race, creed, color, religion, gender, sexual orientation, gender identity/expression, national origin, disability, age, genetic information (including family medical history), veteran status, marital status, pregnancy or related condition, or any other basis protected by law. Vituity is committed to complying with all applicable national, state and local laws pertaining to nondiscrimination and equal opportunity.*Benefits for part-time and per diem vary. Please speak to a recruiter for more information.Applicants only. No agencies please.

Physician Assistant - Emergency Medicine - Redlands Community Hospital

Join the Clean Energy RevolutionBecome&nbsp;a&nbsp;Performance Resource Senior Supervisor&nbsp;at Southern California Edison (SCE) and build a better tomorrow. In this job, you’ll serve as the Performance Supervisor and manage all district scheduling, performance metrics, scorecards, and be the conduit between the district’s planning and operations department. Key Focus of Role <ul><li>Performance Management: Maintains performance management tools to drive crew productivity, cost efficiency, and customer satisfaction; track monthly scorecard results and develop performance improvement initiatives; provide timely, consistent, and accurate feedback regarding performance and recognize employees who demonstrate exemplary performance; and spearhead initiatives to drive performance improvement.</li><li>Workload Management: Supports work order coordination and scheduling procedures at a high-level; project and manage workload three weeks into the future and beyond by assigning work to crews, overseeing long-term schedule for balance and overall date compliance with the goal of optimizing crew productivity.</li><li>Yard Management: Supervises personnel in Yard Management who are engaged in the preparation of material for multiple projects and district Environmental Health &amp; Safety (EH&amp;S) policies and procedures.</li><li>Business Objectives: Establishes, develops, and drives business objectives and plans.</li><li>Operational Excellence: Establishes and maintains high standards of excellence, communicating frequently and openly, engaging others in the solution of performance management problems and responding professionally to personnel requirements.</li><li>Safety: Creates and maintains a safety conscious work environment by leading and influencing others to follow Edison safety protocols and safe work practices. </li></ul>As a&nbsp;Performance Resource Senior Supervisor, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?<h4>Responsibilities</h4><ul><li>Drives performance improvement initiatives, providing consistent and accurate performance feedback to employees and promoting a safety-conscious culture</li><li>Manages all district performance metrics, monthly scorecard results, and overall performance feedback</li><li>Establishes and executes business objectives and plans, engaging others in the solution of performance management problems and enforcing adherence to all applicable regulations and procedures</li><li>Supports work order coordination and scheduling at a high-level, planning three weeks or more into the future </li><li>Utilizes and maintains performance management tools to drive crew productivity, cost efficiency, and customer satisfaction, driving adherence to safety protocols in all organizational areas</li><li>Provides supervision and support to personnel in yard management who are responsible for preparing materials for multiple projects and Environmental Health and Safety policies</li><li>Assigns work to crews, maintaining overall balance and date compliance, and resolves operational issues quickly and effectively</li><li>Recognizes any outstanding employees who demonstrate exemplary performance</li><li>A material job duty of all positions within the Company is ensuring the protection of all its physical, financial and cybersecurity assets, and properly accessing and managing private customer data, proprietary information, confidential medical records, and other types of highly sensitive information and data with the highest standards of conduct and integrity.</li></ul><h4>Minimum Qualifications</h4><ul><li>Four or more years combined experience performing and/or supervising activities related to the design, analyzing metrics, construction, and maintenance, and/or scheduling activities associated with the electric system.</li><li>Possess a valid Class C Driver's License.</li></ul>Preferred Qualifications<ul><li>Four or more years of experience in electrical construction, planning, inspection, or coordination.</li><li>Experience with Initiate, Plan, Schedule, Execute, and Close (IPSEC) model and/or scheduling procedures.</li><li>Experience overseeing and assessing performance metrics and other performance-related data sources.</li><li>Experience managing or overseeing multiple concurrent projects.</li><li>Experience using Click Schedule, SAP, Work It, Power BI and SAS software and familiarization with procedures and processes for each.</li><li>Experience and knowledge of district Environmental Health &amp; Safety (EH&amp;S) policies and procedures.</li><li>Two or more years combined experience supervising or leading represented work force with the application of the IBEW collective bargaining agreement and handling labor relations issues.</li><li>Experience serving as an Operations Supervisor, Planning Manager, Field Supervisor, Energy Delivery &amp; Distribution Specialist, Performance &amp; Resources Analyst, or in a related Performance &amp; Resource Management (PRS) role.</li><li>Bachelor’s degree or higher.</li></ul>Additional Information<ul><li>This position’s work mode is&nbsp;on-site. The employee will report to an SCE facility or in the field location.&nbsp; Further details of this work mode will be discussed at the interview stage. The work mode can be changed based on business needs.</li><li>Visit our&nbsp;Candidate Resource&nbsp;page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!</li><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.&nbsp;</li><li>The primary work location for this position is Monrovia.&nbsp; However, the successful candidate may also be asked to work for an extended amount of time at alternate work location.</li><li>Position will require up to 10% traveling and being out in the field throughout the SCE service territory.&nbsp;</li><li>Relocation does not apply to this position.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.Southern California Edison is a proud Equal Opportunity Employer, including disability and protected veteran status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

Southern California Edison

Performance Resource Senior Supervisor

Join the Clean Energy RevolutionBecome a SeniorGIS Technical Specialist at Southern California Edison (SCE) and build a better tomorrow. In this job, you’ll be part of the Geospatial Analysis group within our Transmission &amp; Distribution Business Unit. In this role, you’ll perform a wide variety of GIS Services by collaborating with internal / external clients to assess project requirements, create high-end analytical and map products utilizing various data types and sources. You will also develop online mapping tools (e.g. ArcGIS Online, Survey123, and Field Maps) and assist with the creation and maintenance of GIS-based web services and web mapping applications. In addition, this position will be supporting the Incident Management Team (IMT), various major capital projects, providing support for fire mitigation, and environmental analysis. As a&nbsp;SeniorGIS Technical Specialist , your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?<h4>Responsibilities</h4><ul><li>Performs in-depth analyses, approves, develops recommendations, and creates scripts, tools or models where appropriate to enhance data flow and analysis</li><li>Leads data remediation efforts including analysis, quality control, and performs or coordinates the asset updates to ensure data is accurate and aligns with actual field conditions</li><li>Identifies industry trends and maintains relationships with relevant stakeholders and provides consultative services on an as-needed basis to address complex GIS problems/issues </li><li>Designs, develops and implements procedures to improve efficiency of operations and processes associated with mapping standards and GIS tools</li><li>Utilizes geospatial software to process, analyze, and model geospatial data to improve processes and data quality</li><li>Collaborates with internal/external business partners to evaluate impacts on departmental activities that rely on GIS data or processes</li><li>Conducts land, regulatory, and related project searches, including identification of new data sources helping identify industry trends and maintain relationships with relevant stakeholders</li><li>Produces high-quality map products for presentations, meetings, public usage and departments; creating key business maps and producing ad-hoc or on-off maps</li><li>Provide functional direction, guidance, and training to staff members to ensure conformance to departmental standards and procedures</li><li>A material job duty of all positions within the Company is ensuring the protection of all its physical, financial and cybersecurity assets, and properly accessing and managing private customer data, proprietary information, confidential medical records, and other types of highly sensitive information and data with the highest standards of conduct and integrity.</li></ul><h4>Minimum Qualifications</h4><ul><li>Five or more years of experience in GIS and analyzing mapping data.</li></ul>Preferred Qualifications<ul><li>Bachelor’s degree in Geography, Environmental Science, or Computer Science, with an emphasis in GIS.&nbsp;&nbsp;</li><li>Project Management experience, including an ability to work with clients to assess project requirements and to plan, coordinate, track and meet scheduled project deadlines.</li><li>Experience with proficiency in the use of ESRI ArcGIS 10.0 or higher, ArcPro, ArcGIS Online, Survey123, FieldMaps, WebApp Builder, and Experience Builder.</li><li>Specialized GIS education or certification.&nbsp;</li><li>Ability to produce technical documentation and to communicate technical approaches clearly and concisely to non-technical audience.</li></ul>Additional Information<ul><li>This position’s work mode is hybrid. The employee will report to an SCE facility for a set number of days with the option to work remotely on the remaining days.  Unless otherwise noted, employees are required to work and reside in the state of California.  Further details of this work mode will be discussed at the interview stage. The work mode can be changed based on business needs.</li></ul><ul><li>Visit our Candidate Resource page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!</li><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.&nbsp;</li></ul><ul><li>Position will require up to 10-15% traveling and being out in the field throughout the SCE service territory.</li><li>Relocation does not apply to this position.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.Southern California Edison is a proud Equal Opportunity Employer, including disability and protected veteran status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

215 Full Time Jobs in Rancho Cucamonga, CA, USA