field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

ResponsibilitiesThis opening is with Howmet Aerospace – a world leader in investment casting of superalloys, aluminum and titanium primarily for jet aircraft and industrial gas turbine markets. For more information about Howmet Aerospace, visit us online at&nbsp;<a href="http://www.howmet.com/" target="_blank">www.howmet.com</a>.Howmet has challenging opportunities for individuals who are excited to engage with us in growing our business. Join us where you will be part of a dedicated team to manufacture high tech products, safely, accurately, and efficiently, you will perform a variety of hands-on operations in accordance with standardized processes within customer specifications.Howmet Aerospace is currently looking for an X-Ray Tech (Level I) to join our Industrial Gas Turbine (IGT) group in Hampton, Virginia.&nbsp;New Hire Starting Rate: $24.58 p/hr.; After 6 months: $27.31 p/hr.This position will receive an hourly “shift premium” of $1.00 p/hr. while assigned to an off shift.Job Summary: The X-Ray Tech (Level I) will radiograph and inspect castings, sample parts, and structural members for flaws, cracks, or presence of foreign materials and process related deviations.&nbsp;Essential Functions &amp; Job Responsibilities:<ul><li>Must possess the skills and knowledge to process parts, document results, and perform equipment standardization in accordance with approved work instructions.</li><li>Must possess the skills and knowledge to carry out any necessary preparation of parts before or after X-Ray inspection in accordance with approved work instructions.</li><li>Must possess the skills and knowledge to conduct system performance checks in accordance with the applicable process standards and customer requirements.</li><li>Must possess the skills and knowledge to advance into and successfully achieve Level II certification.</li><li>Must be receiving of guidance or supervision from a certified Level II or Level III.</li><li>Shall not accept or reject evaluations unless specified in writing and approved by the Level III.</li><li>Operates X-Ray and film processing equipment.</li><li>Must comply with all company attendance policies and guidelines; this includes, but is not limited to, regular attendance and occasional overtime.</li><li>Other duties as assigned.</li></ul>Skills and Abilities:<ul><li>Internal certification with rectification every five years is required.</li><li>Ability to read, write, and apply concepts and use of basic math.</li><li>Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.</li><li>A skills assessment will be administered to internal candidates to verify aptitude in the skills required to perform x-ray inspection.</li></ul>Equipment Used: Various radiographic imaging equipment, 320 MEV, 450 MEV, and Linatron Units.QualificationsBasic Qualifications:<ul><li>An application must include a resume for review and consideration.</li><li>This position requires a minimum of high school diploma or GED certificate.</li><li>This position requires at least 1 year of related manufacturing and/or NDT experience/training.</li><li>Availability for all shifts (including 2nd shift, 3rd shift, and weekend shift) is necessary. The ability to work overtime and weekends is required as schedules may vary based on operational needs; flexibility is essential.</li><li>All newly hired and internal candidates who are successfully awarded this position are required to pass a near vision exam utilizing the Tumbling E Chart per ISO 18490.</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Howmet Aerospace

X-Ray Tech (Level I)

ResponsibilitiesThese&nbsp;openings are&nbsp;with Howmet Aerospace – a world leader in investment casting of super-alloys, aluminum and titanium primarily for jet aircraft and industrial gas turbine markets. For more information about Howmet Aerospace, visit us online at&nbsp;<a href="http://www.howmet.com/" target="_blank">www.howmet.com</a>.Howmet has challenging opportunities for individuals who are excited to engage with us in growing our business. Join us where you will be part of a dedicated team to manufacture high tech products, safely, accurately and efficiently, you will perform a variety of hands-on operations in accordance with standardized processes within customer specifications.New Hire Starting Rates: Ranges from $21.07 p/hr. to 22.24 p/hr. with an increase after 6 months. This position will receive an hourly “shift premium” of $1.00 p/hr. while assigned to an off shift.Job Summary: For the purposes of our hiring events, we will use this requisition to receive applicants. We are hiring for a number of hourly production roles across the plant. The Production Generalist position(s) will support various manufacturing operations.Essential Functions &amp; Job Responsibilities:<ul><li>Read and follow printed and computer-based work instructions.</li><li>Lift with a mechanical lifting device.</li><li>Record data either manually or by computer as required.</li><li>Build ceramic molds around completed wax assemblies and remove wax once complete.</li><li>Inspect, disposition, clean, repair, plug and wrap molds in preparation for Casting.</li><li>Transport and set-up molds for preheat and casting furnaces.</li><li>Remove scale and core material per customer specifications.</li><li>Inspect wax patterns or metal castings for dimensional conformance to specifications which may require the use of Coordinate Measuring Machines (CMM), Ultrasonic gauges (UT), 3D inspection using white or blue light scanning technology, and hand-held measuring devices to include feeler gauges or pincher gauges in accordance with blueprint specifications.</li><li>Remove excess metal or other material per customer specifications.</li><li>Blend welds or prepare castings for welding by means of grinding and blending. Operate and maintain blast cabinets, Burr guns, belt sanders, visual tools, and dimensional gauges.</li><li>Cut and weigh alloy ingots for casting.</li><li>Visually inspect castings.</li><li>Move parts, equipment, and materials throughout the shop.</li><li>Perform shop floor cleaning activities up to and including but not limited to sweeping, mopping, painting, waxing, etc.</li><li>Ability to work in team environments, solo work and working with all level’s management, engineering, and other departments.</li><li>Willing to participate in continuous improvements initiatives within our process to enhance the work task.</li><li>Interact with a variety of team members to ensure product specifications and defect removal.</li><li>This description is not intended to be all-inclusive. Employee may perform other related duties as required.</li></ul>QualificationsBasic Qualifications:<ul><li>An application must include a resume and at least two professional references for review and consideration.</li><li>This position requires a minimum of a high school diploma or general education degree (GED). &nbsp; &nbsp; &nbsp; &nbsp;</li><li>This position requires a minimum of 2 years of continuous work experience. Recent high school or college graduates without prior work experience must provide a letter of recommendation.</li><li>Availability for all shifts (including 2nd shift, 3rd shift, and weekend shift) is necessary. The ability to work overtime and weekends is required as schedules may vary based on operational needs; flexibility is essential.</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>Preferred Qualifications:<ul><li>Experience working in a manufacturing environment.</li><li>Experience with&nbsp;Burr guns, belt sanders, visual tools, and dimensional gauges, Coordinate Measuring Machines (CMM), Ultrasonic gauges (UT), 3D inspection using white or blue light scanning technology, and hand-held measuring devices to include feeler gauges or pincher gauges.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Production Generalist

ResponsibilitiesJob SummaryAs a Product Engineer you will be responsible for all dimensional characteristics and tooling pertaining to the investment casting process and our products.&nbsp; This may involve both new development and production castings. &nbsp;In this role you will be teamed up with a Process Engineer who will be responsible for the metallurgical aspects of the process.&nbsp;The prime responsibility for this position is to engineer the highest yield and lowest overall cost product while meeting or exceeding all customer defined quality requirements.&nbsp; In this position you will work in a team environment with other engineers as well as hands-on with the manufacturing team, so strong communication skills are required.Essential Functions and Job Responsibilities<ul><li>Follow Howmet’s Safety Regulations&nbsp;</li><li>Oversee manufacturing tooling design, construction, and implementation.&nbsp;</li><li>Optimize dimensional and core related yields at minimum manufacturing cost</li><li>Create manufacturing routing and processing instructions</li><li>Develops and debugs processes for production and developmental castings.</li><li>Actively pursues the continuous improvement of existing processes.</li><li>Supplies technical support to customers.&nbsp; Interacts with them regarding technical concerns</li><li>Must comply with all company attendance policies and guidelines; this includes, but is not limited to, regular attendance and some overtime.</li><li>Other duties as assigned.</li></ul>Job Specifications&nbsp;Education:This position requires a minimum of a bachelor’s degree from four-year college or university in Engineering (Preferably Mechanical) or a non-engineering four-year degree with equivalent work-related experience.Skills and Abilities:Reads, analyzes, and interprets technical procedures.&nbsp; Effectively write reports, business correspondence, and procedures. Presents information and respond to questions from groups of managers, clients, customers, and the general public.Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis.Solves practical problems and deals with a variety of variables in situations where only limited standardization exists.&nbsp; Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.&nbsp; Strong analytical and problem-solving skills.Strong communication skills are required.&nbsp; The ability to effectively work with all levels of the organization to achieve your goals are required.This employee must be self-motivated to continue to drive improvement in their assigned portfolio of parts.&nbsp;Leadership ability is desired as this position benefits from being an influential engineer and demonstrated leadership is a plus as the potential advancement exists in 2-4 years.Experience:Technical manufacturing experience preferred but not required.Work Environment:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts.&nbsp; The noise level in the work environment is usually moderate.QualificationsBasic Qualifications:<ul><li>Bachelor’s degree from four-year college or university in Engineering (Preferably Mechanical) or a non-engineering four-year degree with equivalent work-related experience.</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>Preferred Qualifications:<ul><li>Bachelor’s degree in mechanical engineering from an accredited college or university.</li><li>Investment casting experience</li><li>Solid Works and NX CAD proficient</li><li>Minitab/statistics knowledge and strong Excel capabilities</li></ul>

Product Engineer

Responsibilities<a>Manufacturing Engineer</a><a>Howmet Aerospace</a>, headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="http://www.howmet.com/esg-report" target="_blank">www.howmet.com/esg-report</a>. Follow: @howmet LinkedIn, &nbsp;Twitter, Instagram, Facebook, and YouTube.Equal Opportunity Employer:Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>.&nbsp;Job SummaryThis position will be in Hampton, VA and will support IGT manufacturing by providing focused projects that will improve throughput, reduce inventory &amp; reduce operating expense. This position will drive continuous improvement through the reduction of labor costs and new/improved methods &amp; equipment. Must be able to apply standard practices and techniques, adjust and correlate data, recognize discrepancies in results and take corrective action. Will document work, prepare technical notes/reports/documents, and establish customer contacts (internal &amp; external) as required.Job Responsibilities:This position is responsible for developing manufacturing methods to produce parts that consistently meet or exceed our customers’ requirements.&nbsp; Also, continuous improvement of processes by improving methods and developing new methods of manufacturing, leading to increased yields and reduced labor content.&nbsp;<ul><li>Conceives, evaluates and implements Kaizen and other formal problem-solving activities, cost reduction initiatives and part/process improvement activities&nbsp;</li><li>General Technical Support - Collects data and supports manufacturing needs.&nbsp;</li><li>Quotation Prep - Develops material, scrap and labor costs for cost modeling.</li><li>Tooling Development and Build - Provides input based on customer specifications for BOM, routings and milestone plans.&nbsp;Provides manufacturing support fixtures and dies.</li><li>Process Development - Provides manufacturing support for prototypes, instructions and data analysis.</li><li>Equipment Design, Build and Procure - Troubleshoots, validates and qualifies equipment.</li><li>Cell and Standard Work Development - Conducts time studies. &nbsp;Develops cell layout</li><li>Part Number Scrap Reduction and Yield Improvement - Collects data and analysis.&nbsp;</li><li>Floor Coverage and Support - Completes general daily process walk through.&nbsp;Collects data and analysis</li><li>Standard Labor and Process Time Reduction - Analyzes shift labor efficiencies and affectivities.&nbsp; Conducts cost modeling.&nbsp; Implements tooling change.Job Roles:</li><li>Operational accelerator--drives continuous improvement; understands ramifications of automation and other advances; advocates for safety, ergonomics and scalable solutions</li><li>Systems thinker--sees the business and its operation holistically; understands actions and reactions; considers multiple pathways of potential effect before decisions; thinks strategically about interventions with an eye toward scale</li><li>Optimizer--constantly challenging the organization to work smarter; supports others to ensure they have what they need to do their work successfully</li><li>Anticipation--looks ahead to minimize potential issues and maximize advantages; prepares others for what comes next</li><li>Organization and structure--works within existing structures while striving to improve and standardize them; provides accurate information; galvanizes others toward common goals</li><li>Influence--leverages knowledge, relationship, data and perspective to persuade, educate and navigate; gains buy in and adoption of ideas and practices at scale; interacts with a variety of stakeholders</li><li>Data informed--focused on things that drive quantifiable business outcomes; evaluates based on quantitative feedback; knows and explains the “why” behind actions</li><li>Prioritized reaction--handles the unexpected without losing sight of important objectives; reacts where greatest leverage points exist</li><li>Relationship--connects individually and with teams across shifts and practices; builds rapport and commonality; creates a “win together” ethic; serves as liaison between shop floor and engineering; keeps the pulse of the floor; helps people feel heard</li><li></li></ul>QualificationsBasic Qualifications:Education:<ul><li>BS Degree in Engineering from an accredited institution.</li><li>3-5 years of Continuous Improvement, Engineering, or other related Manufacturing experience.</li><li>Employee must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.&nbsp;</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>Preferred Qualifications:<ul><li>BS degree in Manufacturing, Industrial, Mechanical Engineering or Manufacturing Technology &nbsp;</li><li>Lean Six Sigma Green Belt or Higher</li><li>Experience in Kaizen, continuous improvement and formal problem solving.&nbsp;&nbsp;</li><li>Excellent analytical skills, verbal &amp; written communication skills (such as Standard Operating Procedure development)</li><li>Ability to perform and analyze time studies to develop standardized work and set labor standards.</li><li>Ability to create capacity analysis tools that capture machine cycle times, workloads and OEE.</li><li>Experience in the implementation of improved manufacturing processes, such as new and better equipment (including defining scope of work, technology research, quote procurement from vendors, budget setting, equipment installation and start-up, project management of improvement projects)&nbsp;</li><li>Experience in defining and implementing cell layout, plant layout and ergonomically designed workstations.</li><li>Utilization of observation skills to drive NVA (Non-Value Add) waste elimination, reduced operation cycle times and product flow analysis.&nbsp;</li><li>Ability to provide technical leadership and guidance to the manufacturing areas through the use of cross-functional teams.&nbsp;</li><li>Ability to read and interpret blueprints.</li><li>Experience with CAD (2D and/or 3D)</li></ul>

Manufacturing Engineer

Responsibilities<a>Howmet Aerospace</a>, headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit&nbsp;<a href="http://www.howmet.com/" target="_blank">www.howmet.com</a>. Follow @howmet:&nbsp;Twitter,&nbsp;Instagram,&nbsp;Facebook,&nbsp;LinkedIn&nbsp;and&nbsp;YouTube.Howmet Engine Systems is currently seeking an experienced Operations professional to join our team in Hampton, Virginia.&nbsp;&nbsp;&nbsp;Are you an empowered Lead Team Partner with the drive to transform ideas into sustainable value?Weare seeking individuals who have a demonstrated ability to achieve results in a manufacturing environment, as well as the passion to put that experience to work to lead activities and support plant/location team to achieve manufacturing excellence. &nbsp;Our organization is dedicated to rapid, profitable growth through operational excellence and career development.&nbsp; If you are an energetic professional that wants to be a part of a dynamic team, we encourage you to apply. &nbsp;&nbsp;Essential Duties &amp; Responsibilities, not limited to:<ul><li>Coordinate work orders for production equipment.</li><li>Attend meetings with manufacturing and engineering personnel to develop scopes of work and action plans for equipment repair and improvements.</li><li>Inspects machines and equipment to ensure specific operational performance and optimum utilization.</li><li>Utilize basic hand tools and electrical diagnostic tools to troubleshoot and repair equipment deficiencies.</li><li>Train and mentor less experienced technicians on maintenance best practices for their respective area and equipment.</li><li>Develop processes and procedures to improve equipment uptime.&nbsp;</li><li>Leads work efforts for specific project tasks.</li><li>Must comply with all company attendance policies and guidelines; this includes, but is not limited to, regular attendance and occasional overtime.</li><li>Ability to work in team environments, Solo work and working with all levels management, Eng and people.</li><li>Willing to participate in continuous improvements initiatives within our process to enhance the work task.</li><li>Other duties as assigned.</li></ul>QualificationsBasic Qualifications:Education:<ul><li>Certification in mechanical, electrical, or apprenticeship preferred.</li><li>Associates or Bachelors degree in mechatronics preferred.</li></ul>Skills and Abilities:<ul><li>Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.&nbsp;</li><li>Ability to read and interpret electrical, mechanical, hydraulic, and pneumatic drawings.</li><li>Ability to write routine reports and correspondence.&nbsp;</li><li>Ability to speak effectively before groups of customers or employees of organization.</li><li>Ability to define problems, collect data, establish facts, and draw valid conclusions.&nbsp;</li><li>Ability to interpret an extensive variety of technical instructions in mathematical or diagram form.</li></ul>Experience:<ul><li>This position requires a minimum of five years related experience in a maintenance role.</li><li>This position requires a minimum of two years of related experience in an industrial manufacturing environment.</li></ul><ul><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>Preferred Qualifications (For this position to be successful):<ul><li>24/7 operations manufacturing experience preferred.</li><li>Experience with vacuum casting furnaces, injection press machines, and/or Fanuc &amp; Motoman robotic systems is preferred.</li></ul>

Area Maintenance Technician (Weekend Nights)

Area Maintenance Technician (Weekend Days)

SUMMARY:&nbsp;&nbsp;Instruct and facilitate meaningful learning of the course outcomes in the curriculum and proactively support all facets of the learning environment. Provide education through learning-centered instruction that will enable graduates to fulfill the evolving needs of the marketplace. Encourage a culture of learning that values mutual responsibility and respect, life-long learning, diversity, and ethics as well as personal and professional development. Assure that the South University philosophy: quality service to students; development, growth, involvement, and recognition of employees; and an environment conducive to innovation, positive thinking, and expansion is considered in carrying out the duties and responsibilities of this position. Participate in activities that promote the stature of the academic programs, departments, and colleges and abide by the South University Board of Trustees and administration's mandates. (This is a campus-based position in the Virginia Beach, VA&nbsp;area, NOT remote)&nbsp;KEY JOB ELEMENTS:<ul><li>Manage the educational process to ensure every student is involved in a positive educational experience through the learning, teaching, and social environment.</li><li>Perform faculty responsibilities as outlined in the faculty job description in accordance with the provisions of Faculty Supplement to the South University Employee Handbook. </li><li>Provide course instruction in General Management/Leadership, Law/Ethics and/or Economics that aligns with the South University model of curricula and supports the South University style of system delivery.</li><li>Design and deliver instruction through the development of instructional plans to meet course outcomes, the development of activities that support lesson objectives, and for online courses, deliver the instruction as approved within each course shell. </li><li>Effectively utilize technology in the classroom to support the student learning experience.</li><li>Enable the achievement of pre-defined outcomes for student achievement and evaluation of learning in the areas of General Management/Leadership, Law/Ethics and/or Economics by providing instruction that fosters proficiency and establishes student performance criteria and evaluation. </li><li>Deliver learning-centered instruction by establishing an educational environment conducive to learning and student involvement and effectively planning and preparing for classes and student success. </li><li>Promote student success by showing flexibility in style and work schedule and exhibiting a passion for teaching and students, and engaging students in the learning process. </li><li>Manage the educational environment through keeping accurate records, submitting grades and other reports on time, and enforcing academic and attendance policies consistent with the school, campus, or online division.</li><li>Relate professional/life/industry experience to learning by continuing professional/technical skills development, the introduction of industry perspective into courses, and the active awareness of professional/industry trends and opportunities.</li><li>Participate in the faculty development process to enhance knowledge, skills, and abilities in learner-centered instruction. </li><li>Communicate consistently and effectively with supervisor(s), faculty, and other South University administrators. </li><li>Contribute to a learning culture by participating in curriculum and system task forces, support local campus events such as orientation and graduation, and participate in various other workshops and meetings.</li></ul>JOB REQUIRMENTS:<ul><li>Faculty teaching graduate and post-baccalaureate course work: earned doctorate/terminal degree in the teaching discipline of Business Administration, Law and/or Economics or a related discipline.</li><li>Experience in instruction or formalized education process, preferably in a post-secondary or college institution.</li><li>Membership in a professional association tied to the area of instruction preferred.</li><li>International Business Experience preferred.</li><li>At least five years professional experience in the areas of Management, Business Law and/or Economics preferred.</li></ul><ul><li>Academic Processes - recognition of university guidelines, course descriptions, and academic terminology&nbsp;&nbsp; </li><li>Clerical - familiarity with office administrative procedures, including accurate record-keeping </li><li>Computer – competency using and producing quality deliverables using computer tools including Microsoft Office applications (Word, Excel, PowerPoint, and web browsing). </li><li>Technical Knowledge and Application - proficiency with creation of digital media and utilization of learning management systems </li><li>Mathematics – ability to perform basic mathematic calculations</li><li>Analytical – ability to perform basic quantitative analysis</li><li>Critical Thinking - competency in applying logic and reasoning to look at different types of information to derive conclusions and work through problems</li><li>Information Literacy – Proficiency with research methods, looking for key facts and information about a topic, identifying supporting sources, and documenting and citing credible references locates key facts and information to learn more about different types of information</li><li>Communication Skills – effective communication skills, verbal and written, while exercising social awareness</li><li>Written Expression - ability to communicate information and ideas in writing so others will understand. </li><li>Organizational - ability to organize large amounts of information and tasks</li><li>Teaching - ability to convey course concepts and material in a manner that others can understand</li><li>Training and Professional Development – ability and willingness to complete all assigned/required training through South University and engage in own professional development activities to remain current in the teaching disciplines and enhance educational skills</li><li>Ability to physically work in the United States while performing all responsibilities of the position for the University.</li><li>Office Hours - ability to hold required office hours and respond to student questions and administration within the required response time. </li></ul>WORK ENVIRONMENT:&nbsp;&nbsp; The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. The term "qualified individual with a disability" means an individual with a disability who, with or without reasonable accommodation, can perform the essential functions of the position.While performing the duties of this job, the employee is regularly required to communicate professionally in person, over the telephone,video conference, through email and other electronic means, move about the office or school, handle various types of media and equipment, and visually or otherwise identify, observe, and assess. ￼&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; South University is an Equal Opportunity Employer and embraces diversity as a critical step in ensuring employee, student, and graduate success. We are committed to building and developing a diverse environment where a variety of ideas, cultures and perspectives can thrive. JobFamilyAll PositionsEducationLevelDoctorate

South University

Adjunct Faculty, Business

Position Title: Engineering &amp; Technology Program Coordinator Department: Career &amp; Technical Education (CTE) Division: Career &amp; Technical Education (CTE) Employee Status: Full-time Type: Professional Staff Association (PSA) Grade: L Salary: ($66,791-$71,773 annually) FLSA: Exempt ICCB Classification: Professional/ Technical Location: Multiple Locations; Rockford, IL and Belvidere, IL Employment Notice: Rock Valley College does not offer sponsorship for employment-based visas for this position now or in the future. Applicants must be currently authorized to work in the United States without the need for employer sponsorship. Application Deadline:&nbsp;January 4th, 2026&nbsp; Reporting Relationships Reports to: Dean of Career and Technical Education (CTE) Supervision Exercised: Supervision may be exercised over student employees and lab technician. &nbsp; Job Summary The coordinator is responsible for developing, managing, and supporting manufacturing, mechatronics, engineering technology, electrical/electronics, engineering, and apprenticeship programs. This includes industry collaboration, faculty support, student engagement, and oversight of lab operations. The role ensures that programs remain current, industry-relevant, and aligned with workforce needs while also supporting faculty, recruitment efforts, and student success. The coordinator supports teaching and learning through curriculum development, program assessment, and teaching of coursework under the direction of the Dean. Essential Duties and Responsibilities include the following. Related duties may be assigned. &nbsp; Program Development &amp; Curriculum Management 1. Oversee implementation and continuous improvement of curriculum for manufacturing, mechatronics, engineering technology, and apprenticeship programs. 2. Ensure programs meet regional industry demands and align with workforce development needs. 3. Work with faculty and industry partners to review, update, and modernize course content. 4. Ensure compliance with accreditation and certification requirements. 5. Assist in developing new courses and programs based on employer feedback and student interest. &nbsp; Faculty &amp; Instructional Support 1. Teach courses in Manufacturing, Mechatronics, Electrical and/or Engineering Technology, as needed based on candidate credentials. (Courses taught outside of normal working hours will be compensated by additional stipend.) 2. Provide guidance and support for adjunct faculty in program delivery. 3. Assist with faculty recruitment, training, and evaluation as needed. 4. Support faculty with instructional resources, labs, and classroom technology. 5. Serve as contact person and software administrator for instructional technology and resources, such as Amatrol. 6. Proctor certification testing for students as part of their coursework, such as NIMS Certification. &nbsp; Industry Engagement &amp; Advisory Committees 1. Collaborate with local employers and industry experts to align curriculum with workforce needs. 2. Organize and participate in Advisory Committee meetings to gather industry input. 3. Develop partnerships with employers to support internships, career pathways, and hands-on learning opportunities. 4. Coordinate Apprenticeships by maintaining student rosters, apprentice programs of study with industry partners, fostering external industry relationship and troubleshooting ongoing student/industry needs, communicating with related RVC departments and faculty. &nbsp; Lab &amp; Equipment Oversight 1. Work with the Lab Technician to maintain equipment functionality and readiness. 2. Ensure software and hardware resources are updated and available for instruction. 3. Develop budget recommendations for equipment purchases and program expansion. 4. Collaborate with IT and faculty to update or acquire instructional technology (e.g., SolidWorks, Mastercam, Immerse2Learn). &nbsp; Student Recruitment, Retention, &amp; Success 1. Coordinate with Marketing, Student Services, and faculty to recruit students into the programs. 2. Support student retention and completion efforts, ensuring they have the resources needed to succeed. 3. Assist students in career preparation, including industry certifications and job placement support. 4. Participate in campus and community outreach events to promote Engineering and Technology programs, including summer camps. 5. Assist with the coordination of the NIU @ RVC program, including recruitment, student success efforts, and alignment with NIU’s College of Engineering. 6. Assist in work-based placement (e.g., internships, apprenticeships, post-graduation opportunities). &nbsp; Administrative Responsibilities 1. Ensure classroom and lab schedules are accurately assigned to courses each semester. 2. Work with the Administrative Assistant to verify that all instructors have access to classrooms, storage closets, and equipment. 3. Manage software renewals and updates for instructional programs (SolidWorks, Mastercam, Immerse2Learn). 4. Collaborate with IT to ensure all classroom and lab computers have updated software for instructional use. 5. Maintain accurate student records, program reports, and institutional documents. 6. Attend college meetings, workshops, and professional development opportunities. 7. Represent the program at college-wide and external events. 8. Ensure compliance with safety regulations, institutional policies, and industry standards. 9. Coordinate and manage the application, registration, record keeping, and academic progress of apprenticeship students. Additional -Additional duties as assigned Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Minimum Qualifications 1. Bachelor’s degree in a related field (e.g., Engineering, Education, or Business) or an Associate of Applied Science degree in a related technical field (e.g., Engineering Technology, Manufacturing, or Mechatronics) or Certificate of Completion/Industry-recognized credential with 2 years of related work experience. 2. At least one year of work experience in a relevant engineering, manufacturing, educational, or technical field. 3. Knowledge of and experience in manufacturing, engineering, Career and Technical Education (CTE), or workforce development fields. 4. Strong communication, organizational, and problem-solving skills, with the ability to work independently and collaboratively with faculty, staff, students, and industry partners to support program operations and continuous improvement. 5. Proficiency with standard computer applications and data management tools. 6. Valid driver’s license. &nbsp; Preferred Qualifications 1. One to three years of experience in manufacturing, engineering technology, mechatronics, or Career and Technical Education (CTE) programs. 2. Experience with budget coordination, scheduling, or resource planning for academic or training programs. 3. Experience supporting or delivering technical instruction in an educational or training environment. 4. Experience managing instructional labs or facilities, including equipment maintenance, purchasing, and safety compliance. 5. Familiarity with software or technologies commonly used in engineering and manufacturing education (e.g., design, simulation, or automation tools). 6. Experience collaborating with employers, industry partners, or workforce development organizations. &nbsp; Work Environment While performing the duties of this job, the employee regularly works in an office and instruction lab setting. Frequent interaction with faculty, students, and external partners. Occasional evening or weekend hours required for special events, recruitment efforts, and test proctoring. Location will be at the Main Campus in Rockford, IL and the Advanced Technology Center in Belvidere, IL &nbsp; Physical Demands Physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel, or operate objects, tools or controls, and reach with hands and arms. The employee is frequently required to stand, talk and hear.

Rock Valley College

Engineering and Technology Program Coordinator

Position Title: Engineering &amp; Technology Lab Technician Department: Career &amp; Technical Education (CTE) Division: Career &amp; technical Education (CTE) Employee Status: Full-time Type: Professional Staff Association (PSA) Grade: J Salary: ($49,000 -$54,000 annually) FLSA: Exempt Location: Multiple Locations; Rockford, IL and Belvidere, IL ICCB Classification: Professional/ Technical Employment Notice: Rock Valley College does not offer sponsorship for employment-based visas for this position now or in the future. Applicants must be currently authorized to work in the United States without the need for employer sponsorship. Application Deadline:&nbsp;January 4th, 2026&nbsp; Reporting Relationships Reports to: Dean of Career and Technical Education (CTE) Supervision Exercised: None &nbsp; Job Summary The Lab Technician is responsible for maintaining and supporting the operational integrity of the manufacturing, electrical/electronics, mechatronics, and engineering labs. This includes equipment maintenance, stocking supplies, enforcing safety procedures, and assisting instructors and students with lab setup and operations. The Lab Technician will work closely with faculty, the program coordinator, and students to ensure the labs are fully equipped, well-maintained, and conducive to hands-on learning. This collaborative role involves troubleshooting technical issues, providing technical support, and helping create an effective learning environment that aligns with academic objectives. Essential Duties and Responsibilities include the following. Related duties may be assigned. &nbsp; Equipment &amp; Lab Maintenance 1. Ensure all lab equipment is properly set up, maintained, and operational. 2. Perform routine maintenance, troubleshooting, and repairs on lab equipment, including CNC machines, robotics, PLCs, 3D printers and hydraulic/pneumatic systems. 3. Coordinate specialized repairs with external vendors. 4. Clean and maintain machines, tools, and workspaces to ensure a safe and organized environment. 5. Monitor and replenish PPE supplies (e.g., safety glasses, ear protection) and ensure compliance with safety regulations. 6. Check and top off coolant levels in CNC machines and other required systems. 7. Perform weekly inspections of 3D printers and replace worn/damaged components as needed. 8. Manage machine shop cleaning and waste disposal, including coolant disposal coordination. 9. Ensure all safety signage is present and up to date. 10. Coordinate with IT to install or update software for instructional equipment. 11. Ensure all classroom and storage closet locks are functional, including battery replacement for electronic locks. Inventory &amp; Supplies Management 1. Maintain inventory of materials, tools, and consumables, ordering replacements as needed. 2. Work with vendors to procure parts, materials, and consumables for courses and training programs. 3. Organize and label tool storage areas for ease of use by instructors and students. 4. Monitor expiration dates and usability of supplies such as cutting tools, lubricants, and electronic components. 5. Ensure all classrooms and labs that require PPE have a sufficient supply (e.g., safety glasses, earplugs). 6. Develop budget recommendations for equipment repair, replacement, and preventative maintenance. Lab Support &amp; Course Setup 1. Prepare classrooms and labs before the start of each semester (e.g., ensuring working projectors, computers, whiteboards, and classroom furniture are properly arranged). 2. Assist instructors with setting up lab exercises and demonstrations. 3. Ensure all labs have the appropriate number of chairs and workstations per course enrollment. 4. Maintain access control by ensuring faculty and authorized students have access to required rooms and storage areas. 5. Work with faculty to schedule machine access and lab time. 6. Support faculty and students with hands-on technical troubleshooting. 7. Check that classroom overhead projectors and document cameras (ELMO) are in working condition. 8. Ensure paper printers are stocked and functional in all relevant classrooms/labs. 9. Serve as contact person and software administrator for instructional technology and resources, such as Amatrol. 10. Proctor certification testing for students as part of their coursework, such as NIMS Certification. Safety &amp; Compliance 1. Enforce safety procedures, ensuring that students and staff follow PPE and equipment usage guidelines. 2. Perform routine safety checks and report hazards or broken equipment. 3. Ensure lab compliance with OSHA and institutional safety regulations. 4. Assist in emergency lab evacuations and incident reporting. Additional 1. Teach courses in Manufacturing, Mechatronics, Electrical and/or Engineering Technology, as needed based on candidate credentials. Courses taught outside of normal working hours will be compensated by additional stipend 2. Participate in campus and community outreach events to promote Engineering and Technology programs, including summer camps. 3. Additional Duties as assigned Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Minimum Qualifications 1. High School diploma or equivalent and industry-recognized credential in industrial maintenance, manufacturing technology, mechatronics, or a related technical field. 2. At least one year of hands-on experience with manufacturing or industrial systems such as CNC machines, robotics, PLCs, or fluid power systems. 3. Demonstrated mechanical and troubleshooting skills related to equipment setup, maintenance, and repair. 4. Knowledge of lab and shop safety procedures and ability to enforce safe operating practices. 5. Ability to lift, move, and install lab or shop equipment as required. 6. Basic computer proficiency (email, spreadsheets, equipment or inventory software). 7. Effective communication and teamwork skills to assist instructors and students in a fast-paced lab environment. 8. Valid driver’s license. &nbsp; Preferred Qualifications 1. Associate’s degree in industrial maintenance, mechatronics, manufacturing technology, or a related technical field. 2. Two or more years of experience maintaining, troubleshooting, or repairing industrial or educational lab equipment. 3. Experience supporting instructional activities and ensuring lab equipment and materials are ready for student use. 4. Experience managing lab operations, including calibration, inventory control, preventative maintenance, and coordinating with vendors. 5. Familiarity with industrial automation and control systems (e.g., PLCs, robotics, pneumatics, and hydraulics). 6. Knowledge of safety standards such as OSHA, lockout/tagout, and lab safety compliance. &nbsp; Work Environment The job requires working in lab spaces with heavy machinery, electrical components, and manufacturing tools. Frequent standing, lifting, and manual labor required. Occasional work in office and classroom settings for administrative tasks. Some evening and weekend hours may be required based on course schedules. &nbsp; Physical Demands Physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel, or operate objects, tools or controls, and reach with hands and arms. The employee is frequently required to stand, talk and hear.

Engineering and Technology Lab Technician

ResponsibilitiesMaintenance Planner<a>Job Summary</a>This opening is with Howmet Aerospace – a world leader in investment casting of super-alloys, aluminum, and titanium primarily for jet aircraft and industrial gas turbine markets. For more information, visit&nbsp;<a href="http://www.howmet.com/" target="_blank">www.howmet.com</a>.&nbsp;Follow @howmet:&nbsp;Twitter,&nbsp;Instagram,&nbsp;Facebook,&nbsp;LinkedIn&nbsp;and&nbsp;YouTube.Howmet has challenging opportunities for individuals who are excited to engage with us in growing our business. Join us where you will be part of a dedicated team to manufacture high tech products, safely, accurately, and efficiently, you will perform a variety of hands-on operations in accordance with standardized processes within customer specifications.&nbsp; &nbsp; &nbsp;&nbsp;The Maintenance Planner is responsible for the management of spare part equipment, common maintenance tooling, daily/weekly/monthly reports, spare parts storage area, and preventive maintenance reporting. This role is best suited for someone who can demonstrate proficiency in organizational skills, Microsoft Excel, and a self-motivated attitude. This position will work with the Maintenance Supervisors, Facilities Engineers, and Automation Controls team to support Production by managing the equipment inventory and assisting in the management of the preventive maintenance program. Essential Duties and Responsibilities, not limited to: This is a representative summary of the major duties and responsibilities and is not all inclusive. Incumbent(s) may and may be required to perform additional, position-specific tasks.<ul><li>Create and modify Microsoft Excel Sheets through the utilization of conditional formatting, formulas, and macros.</li><li>Prepare the Preventative Maintenance work orders for the Maintenance team on a weekly basis.</li><li>Assist in the development of general Maintenance procedures and work instructions.</li><li>Responsible for requesting quotations for spare parts based on technical requests from Engineering and Maintenance teams.</li><li>Order and track spare parts requests in the on-site Purchasing system.</li><li>Organize all ordered, received, on hold, and cancelled requests within an Excel spreadsheet.</li><li>Able to create, utilize, and manipulate formulas in Excel to sort large amounts of data into a presentable format.</li><li>Maintain the Critical Equipment Spare Part Excel Sheet and create identification tags for parts that are received in.</li><li>Manage the maintenance common tooling process.</li><li>Assist in the management of calibrating all critical furnace equipment by sending/receiving devices before expiration dates.</li><li>Comfortable walking onto the Production floor to receive incoming spare parts and manage the spare parts storage area.</li><li>Gather data from multiple spreadsheet sources and create re-occurring reports for the on-site management team.</li><li>Assist in the planning of Maintenance shut down jobs working with the Maintenance Supervisor and Facilities Engineering team.</li><li>Manage consumable Preventive Maintenance spares as they are used throughout the year.</li><li>Demonstrate a basic understanding of Mechanical, Hydraulic, and Electrical system principles.</li><li>Comfortable working in dirty environments to support the Maintenance spare parts program.</li><li>Maintains a safe and organized workstation and follows all company policy, safety, and procedures.</li><li>Performs all other duties as assigned.</li></ul>QualificationsQualifications&nbsp;Basic Qualifications:<ul><li>High School Diploma/GED from an accredited institution</li><li>Minimum 1 year of experience working in a manufacturing environment or maintenance related field (Hydraulic Systems, CNC Machines, Water Jets, Mechanical Systems, Electrical Systems, Welding, HVAC, or Facilities/General Maintenance).</li><li>Minimum 3 years of experience working in an office administrative position utilizing computer software to manage inventory and schedule business related operations.</li><li>Be able to demonstrate proficiency in Microsoft Office Suite, specifically in Excel.</li><li>Be able to demonstrate proficiency and provide examples of managing/organizing business inventory.</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li><li>Preferred Qualifications:</li><li>Associate or bachelor’s degree from an accredited institution in procurement, planning, or maintenance reliability related field of study.</li><li>3+ years of experience working in a manufacturing environment or maintenance related field.</li><li>3+ years of experience working in an office administrative position utilizing computer software to manage inventory and schedule business related operations.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

47 Full Time Jobs in Virginia Beach, VA, USA