field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

ResponsibilitiesThe Manufacturing Manager is responsible for providing leadership in manufacturing excellence, ensuring customer satisfaction and continuous improvement of plant performance measurements (quality, productivity, cycle time, delivery and cash flow).&nbsp; This position provides direction for hourly and manufacturing support employees.Job Responsibilities<ul> <li>Follow Safety Regulations along with all department specific safety requirements</li> <li>OEE</li> <li>Production Value Added by department</li> <li>Daily targets for shipments</li> <li>Profit/Revenue</li> <li>Ensure the safety of all employees by promoting a clean and safe work environment.</li> <li>Improve manufacturing planning, execution, and shop floor discipline.</li> <li>Provide leadership for Plant ABS and lean manufacturing initiatives.</li> <li>Provide leadership to identify and remove non-value-added waste.</li> <li>Improve product flow and/or implement method improvements to reduce labor content.</li> <li>Develop and train for the professional and personal growth of team leaders, cell facilitators, supervisors and other manufacturing support personnel.</li> <li>Address any safety issues or non- compliances immediately.</li> <li>Promote Injury Free Event (IFE) reporting</li> <li>Accountable for applicable department budgets.</li> <li>Maintain good relations and communication with Howmet customers.</li> <li>Develop with plant manager and staff budget, strategic plans, team goals and objectives that align with BU objectives.</li> <li>Flow down goals and objectives to the entire organization.</li> <li>Contribute to other location specific and corporate teams.</li> <li>Maintain excellent delivery performance.</li> <li>Conduct capacity analysis to drive standard work and ensure accuracy of standards.</li> <li>Drive cost reductions to improve profitability.</li> <li>Use lean manufacturing tools to reduce WIP and cycle time.</li> <li>Communicate all relevant information to Staff, customers and management.</li> <li>Understand constraint management, OEE and apply techniques that exploit constraints to improve OEE.</li> <li>Provide leadership in implementing continuous improvement methods and ideas.</li> <li>Consults with engineering personnel relative to modifications to the process in order to improve production and quality of the products.</li> <li>Provide leadership in a safety and continuous improvement initiatives.</li></ul>Job Roles<ul> <li>Empowering talent--identifies and removes obstacles to productivity at individual and systemic levels; inspires and equips people to perform; understands direct link between people and measurable performance; provides cross-training opportunities.</li> <li>Flexibility--responds readily to a variety of stimuli in an environment where every day can be different; capable of multitasking and moving quickly from one topic to another; employs different mindsets or perspectives situationally</li> <li>Organized and time conscious--manages time well; does what is needed efficiently; understands how long processes require and manages expectations accordingly; navigates the tension between availability and proactivity&nbsp;</li> <li>Business-minded--aligns people and resources to demand; forecasts need and synthesizes input to anticipate focus areas on a time and project basis; thorough understanding of business enables quick decisions where appropriate</li> <li>Interpretation and synthesis--makes sense of multiple inputs quickly and efficiently; generates action plans from available information; interprets data and qualitative information to provide justification and purpose; rationalizes decision making with substantive reasoning; understands relevant numbers and trends</li> <li>Rigor--participates in audit processes; utilizes existing systems extensively and expertly; solicits information from shift level to enterprise; creates processes through continuous improvement</li> <li>Team orientation--often involved at a tactical level; can contribute technically or operationally if needed, though not as first option; retains authority while delegating ownership</li> <li>Trust and relationship--communicates openly and regularly, maintaining information flow; visible on floor; focuses attention on strengths and achievements, while addressing shortcomings as needed</li> <li>Ingenuity--finds efficiencies and gains time closer to delivery; solicits and implements ideas; invites improvement from any sector or level</li> <li>Professional posture--handles escalations objectively and dispassionately; recasts difficult situations as opportunities for learning and growth; custodian of plant environment and brand</li></ul>QualificationsBasic Qualifications:<ul> <li>High school diploma or GED from an accredited institution.</li> <li>7+ years experience in leadership roles within a manufacturing environment; 3 of the 7&nbsp;years must be as a supervisor in a manufacturing environment.</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>Preferred Qualifications:<ul> <li>BA/BS in Business Administration or Engineering from an accredited institution.</li> <li>Experience in the investment casting industry a plus.</li> <li>Strong leadership skills that create an engaged employee environment.</li> <li>Able to drive improvement through the implementation of the lean manufacturing principles, total quality practices, six sigma.</li> <li>A strong technical understanding of manufacturing processes.&nbsp;</li> <li>Strong analytical, problem solving, communication, interpersonal, organizational and negotiation skills.</li> <li>Strong financial literacy</li> <li>Experience with tooling, molds and dies relating to the Investment Casting, Injection Molding, or Stamping Industries is preferred.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

Manufacturing Manager - Plant 4 - Ti-Ingot

ResponsibilitiesThis&nbsp;Product Engineer&nbsp;position will be in our Plant 3, Whitehall Casting Operations&nbsp;and will support manufacturing through process control, improvement initiatives, and assume direct responsibility for&nbsp;integrity for assigned products.&nbsp;&nbsp;This position will also establish and maintain external &amp; internal customer associate documents; prepare part specific work instructions; maintain knowledge of job cost; and develop/implement appropriate plans to improve profitability.Job Roles&nbsp;<ul> <li>Systems thinker--sees the business and its operation holistically; understands actions and reactions; considers multiple pathways of potential effect before decisions; thinks strategically about interventions with an eye toward scale</li> <li>Optimizer--constantly challenging the organization to work smarter; supports others to ensure they have what they need to do their work successfully</li> <li>Anticipation--looks ahead to minimize potential issues and maximize advantages; prepares others for what comes next</li> <li>Operational accelerator--drives continuous improvement; understands ramifications of automation and other advances; advocates for safety, ergonomics and scalable solutions</li> <li>Organization and structure--works within existing structures while striving to improve and standardize them; provides accurate information; galvanizes others toward common goals</li> <li>Influence--leverages knowledge, relationship, data and perspective to persuade, educate and navigate; gains buy in and adoption of ideas and practices at scale; interacts with a variety of stakeholders</li> <li>Data informed--focused on things that drive quantifiable business outcomes; evaluates based on quantitative feedback; knows and explains the “why” behind actions</li> <li>Prioritized reaction--handles the unexpected without losing sight of important objectives; reacts where greatest leverage points exist</li> <li>Relationship--connects individually and with teams across shifts and practices; builds rapport and commonality; creates a “win together” ethic; serves as liaison between shop floor and engineering; keeps the pulse of the floor; helps people feel heard</li></ul>Job Responsibilities&nbsp;<ul> <li>Plans and formulates engineering programs within area of assigned responsibility.</li> <li>Implements and reviews process design for compliance with engineering principles, company standards and customer contract requirements and related specifications.</li> <li>Supports activities concerned with technical development, customer issues, cost reduction programs and in resolving engineering design and test problems.</li> <li>Evaluates and approves design changes, specifications and drawing releases.</li> <li>Prepares interim and completion project report, as necessary.</li> <li>Provide technical support for assigned coating, brazing and/or manufacturing area of assignment.</li> <li>Interfaces with production personnel regarding all processing requirements.&nbsp; Interact with suppliers and customers on technical issues.</li> <li>Performs process quality investigations, as required.</li> <li>Develops and implements process improvements and cost reductions.</li> <li>Designs tools and fixtures pertinent to processing.</li> <li>Generate material requisitions to initiate procurement.</li> <li>Translate customer requirements into usable work instructions and interface with customer on technical issues.</li> <li>Review purchase orders, specifications and blueprints for impact.</li> <li>Assembles data packages for customer approval.</li> <li>Specifies processing and generates work instructions.</li> <li>Actively pursues elimination of waste, the improvement of equipment reliability and efficiency, and the reduction of operating costs.&nbsp; Employs statistical methods as necessary.</li> <li>Continuously improves the performance of job-related responsibilities.</li></ul>QualificationsBasic Qualifications<ul> <li>Bachelor’s Degree in Engineering from an accredited institution.</li> <li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>Preferred Qualifications<ul> <li>Bachelor’s Degree in Engineering from an accredited institution in the following disciplines preferred: Aerospace, Mechanical,&nbsp;Manufacturing, Chemical, or Industrial.</li> <li>Strong verbal, written, and analytical skills.</li> <li>Knowledge of MS Office.</li> <li>Able to work in a self-directed or team environment and have good organizations skills.</li> <li>Knowledge of Six Sigma, statistical analysis, and scientific methods for problem solving.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Product Engineer - Plant 3

ResponsibilitiesThis position will be located in our Plant 5, Ti-Cast and HIP Operation and is the on-site representative for an assigned customer account portfolio.&nbsp; This position acts as a customer service advocate, both as primary plant contact for customer specific issues and primary customer contact for plant specific issues.&nbsp; Key responsibilities include purchase order management, quotation management, forecast maintenance and coordination/resolution of open items associated with his/her account portfolio. The negotiation of commercial issues, as well as the formulation, maintenance and communication of key customer projects internally and externally is an important facet of this position.&nbsp; The Plant Sales Representative must also strive to attain and enhance customer relationships.&nbsp;&nbsp;Responsibilities<ul> <li>Owner of customer portfolio.&nbsp;</li> <li>Manages tooling forecast for assigned customer portfolio to ensure monthly targets are met.</li> <li>Negotiate commercial issues that may arise.&nbsp;</li> <li>Purchase Order Management: ensure customer PO’s are issued, assist quality and engineering with BOM issues, and make sure PO’s are booked in a timely matter.</li> <li>Manage Account Receivable balances. Includes: following up on outstanding AR, coordination with Finance Department, and pull on Account Management team to assist with lagging issues.</li> <li>Provide back up for non-assigned customer accounts.</li> <li>Maintain and enhance customer relationships.</li> <li>Fields and promptly responds to inquiries from customers regarding status of key projects, open orders, and any unresolved issues.&nbsp; &nbsp; &nbsp; Communication with customers could be by telephone, written correspondence, or visitation (to and/or by).</li> <li>Quotation management: coordinates internal review of customer quotations and new business proposals, including initial review of project potential with Sales Support Manager; preparation of cost models with Estimator, Engineering, and Manufacturing; and preparation of a “near final” proposal for Plant Manager, Account Manager, and VP of Business Unit.</li> <li>Acts as an integral part of the Business Center Team.&nbsp; &nbsp; &nbsp; Exercises direct responsibility for the tracking of open items, for quotation of changes to project work scope, for securing P.O. coverage, and for resolution of contractual issues delaying input or shipment of customer requirements.&nbsp; May be assigned to a customer development project participating in the formulation and maintenance of detailed project plans.</li> <li>Personally coordinates customer visitations and works with Business Center colleagues to develop detailed agendas for meetings.</li> <li>Collaborates with plant Cost Estimator to provide cost models and detailed program background in support of long-term contract proposals/negotiations.&nbsp;</li> <li>Prepares three-year Long-Range Plan and Annual Budget for assigned portfolio utilizing based-line data provided by Group Sales meshed with their program/part specific knowledge.&nbsp; &nbsp; &nbsp; Participates/assists in business plan and budget preparations for Business Center.</li></ul>Job Roles&nbsp;<ul> <li>Liaison--connects customers to the enterprise; furnishes customer information to planning and execution functions and relevant information to customers, creating continuous feedback loops; negotiates between stakeholder groups as needed</li> <li>Facilitator--ensures timely processing and booking of customer orders; sets expectations and deadlines; follows up with stakeholder groups; seeks status toward fulfillment; provides fuel to keep things moving and establish momentum</li> <li>Relationship and communication--interacts with a wide variety of internal and external stakeholders; facilitates communication and information exchange between stakeholders; speaks the language of the business and the language of the customer; protects interests such as IP, yet advocates for the customer; emphasizes common goals; builds rapport</li> <li>Organization and structure--detail and follow through oriented; adheres to systems and timelines; handles significant data input; monitors inputs and feedback; creates backups and manages documentation; facilitates access through technology</li> <li>Completion oriented--knows when and where to get information that ultimately informs delivery; every interaction points toward understanding capability and fulfilling commitments to customers</li> <li>Service and responsiveness--first point of contact for feedback; helps internal stakeholders perform better with customer insights; helps external stakeholders by providing their internal voice; thinks critically and prioritizes well; timely in response and action</li> <li>Business awareness--understands commercial strategy and processes that support it; recognizes role and contribution toward critical metrics such as revenue and margin; manages short- and long-term projects</li> <li>Influence--persuades without direct reporting authority; willing to have tough conversations; operates with a global mindset and demonstrates cultural sensitivity; individualizes and customizes to achieve outcomes</li></ul>Qualifications BASIC QUALIFICATIONS <ul> <li>Bachelor's Degree from an accredited institution.</li> <li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li> </ul> PREFERRED QUALIFICATIONS <ul> <li>Experience working in a manufacturing environment.</li> <li>BS Degree in Business Administration, Marketing, or Management from an accredited institution.</li> <li>Minimum of 1 year customer facing experience in a customer service, sales, or production control/planning role.</li> <li>Must be highly proficient with Microsoft Office applications including Excel, Word and PowerPoint.&nbsp; MS Access and Excel Pivot Table knowledge desired.</li> <li>Effective oral and written communication skills are mandatory.</li> <li>Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.</li> <li>Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.</li> <li>Mastery of basic cost and math skills applicable to commercial transactions.&nbsp; Applies percentages, ratio, and analysis as required.</li> <li>Mechanical aptitude</li> <li>Self-starting, detail-oriented person capable of planning and managing a portfolio of customer projects.</li> <li>Strong interpersonal and negotiation skills</li> <li>Ability to quickly form productive relationships so as to “get things done” both internally and at the customer.</li> </ul> &nbsp; Same Posting Description for Internal and External Candidates About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Plant Sales Representative - Plant 5

ResponsibilitiesThis off-shift&nbsp;CASTING TECHNICIAN&nbsp;position will be located in our plant 5, Ti-Cast&nbsp;Operation.&nbsp; Primary responsibilities will include:<ul> <li>Operate vacuum melting equipment.&nbsp;</li> <li>Troubleshoot and repair equipment as necessary.&nbsp;</li> <li>Maintain accurate and detailed logs.&nbsp;</li> <li>Work to detailed and controlled work instructions.&nbsp;&nbsp;</li> <li>Executes minor maintenance.&nbsp;</li> <li>Repairs and replaces furnace components.&nbsp;</li> <li>Checks and maintains furnace fluid levels.&nbsp;</li> <li>Prepares and sets up furnace for following shift.</li> <li>Performs housekeeping activities to keep machines and work area clean.&nbsp;</li> <li>Sweeps and mops work area.&nbsp;</li> <li>Scrapes and cleans mold and melt chambers of furnaces.&nbsp;&nbsp;</li> <li>Complies with all EHS rules required for the work environment.&nbsp;</li> <li>Performs other work-related duties, as assigned.&nbsp;</li></ul>QualificationsBasic Qualifications:<ul> <li>High school diploma or GED from an accredited institution.</li> <li>Minimum of two years of work experience, or six months manufacturing experience.</li> <li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li></ul>Preferred Qualifications:<ul> <li>Experience in a manufacturing environment.</li> <li>Previous casting experience a plus</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

CASTING TECHNICIAN - Plant 5

ResponsibilitiesHowmet Engines seeks an experienced professional to join our team! &nbsp;The Manager of Metrology and Nondestructive Testing (NDT) measurement will lead and oversee all activities related to inspection, testing, calibration, and measurement systems within the Airfoils organization. This role ensures compliance with industry standards, customer requirements, and regulatory guidelines while driving accuracy, reliability, and continuous improvement of processes. This role is based in Whitehall, MI and will travel to other Airfoils locations.&nbsp; This role reports directly to the Airfoils Director of Engineering in the Engines business unit.Position will be based in Whitehall, Michigan. Will consider candidates local to all US Airfoils Segment locations.Primary ResponsibilitiesLeadership &amp; Strategy• Lead the NDT measurement and Metrology strategies to include<ul> <li>Layout</li> <li>Gauging</li> <li>Airflow</li> <li>CMM</li> <li>Structured light measurement</li> <li>GOM experience&nbsp;</li></ul>• Serve as the subject matter expert on NDT measurement and metrology technologies, tools, and best practices.Quality &amp; Compliance• Partner with Quality Assurance and Engineering teams to maintain compliance with customer contracts, FAA, DoD, or other regulatory requirements. • Support audits, certifications, and customer inspections by preparing documentation and representing NDT and metrology functions. • Develop and implement standard operating procedures (SOPs) to ensure consistency and reliability in inspection and measurement processes.Continuous Improvement/Innovation• Champion continuous improvement projects to enhance efficiency, throughput, and accuracy of NDT measurement and metrology functions. • Evaluate and implement emerging technologies to maintain competitive advantage. • Drive initiatives to reduce nonconformances and improve first-pass yield.&nbsp;QualificationsBasic Qualifications:• Bachelor’s degree in Engineering, Materials Science, or related field and a minimum of 7 years of progressive experience in NDT and Metrology with at least 3 yrs in a leadership role OR a minimum of 11 years of progressive experience in NDT and Metrology with at least 3 yrs in a leadership role.Preferred Qualifications:• ASNT Level III certification in at least one method strongly preferred. • Strong knowledge of ISO 17025, AS9100, and related industry standards. • Hands-on experience with advanced metrology systems (e.g., CMM, GD&amp;T, laser scanning). • Proven track record of leading teams, managing budgets, and driving process improvements. • Excellent communication, problem-solving, and organizational skills.About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Manager of Metrology and NDT Measurement

ResponsibilitiesHowmet Aerospace has an immediate opening for a Health and Safety (H&amp;S) Leader at our Whitehall, Michigan location. Our passionate commitment to EHS provides the successful candidate with an excellent environment in which to work and the leadership commitment and support to deliver results.&nbsp; This position is a key member of the EHS team and is a highly visible position in the operations and in the Engines Business Unit.&nbsp;In close cooperation with the location’s leadership team, this position will be accountable for driving environmental, health and safety efforts across the locations.&nbsp;Significant interface will be required with local management, Business Unit management and other internal and external stakeholders.&nbsp;Key Responsibilities of this position include:<ul> <li>Coach and counsel location leaders to assist them in the execution of their EHS accountabilities.</li> <li>Partner with location leadership to deliver EHS objectives.</li> <li>Develop and execute strategic and tactical EHS plans to drive fatality prevention, increase risk recognition and reduce injuries/incidents, improve employee health and environmental compliance and protection.</li> <li>Act as location representative to key internal and external stakeholders.</li> <li>Lead, mentor, develop and support the location’s professional EHS staff.</li></ul>Job ResponsibilitiesResponsible for determining the strategic direction of all Environmental, Health and Safety programs for location. Sets EHS goals and helps set EHS priorities.&nbsp; Provides direction on managing programs/policies and providing technical expertise for management of all EHS issues.&nbsp;<ul> <li>Is jointly responsible with the Plant Manager for strategic direction in the deployment of environmental, safety, and health at the plant.&nbsp;</li> <li>Is responsible for tactical direction in the deployment of environmental, safety, and health at the plant.&nbsp;</li> <li>Is the environmental, safety, and health "eyes and ears" of the Plant Manager within the plant.&nbsp;</li> <li>Develops and is a resource for development of programs designed to prevent injuries, illnesses and property loss.&nbsp;</li> <li>Manages the administrative activities and management systems to ensure compliance with applicable corporate policies and state and federal regulations.&nbsp;</li> <li>Is the environmental, safety, and health expertise for the plant and is responsible for keeping the Plant Manager informed of current and emerging issues in environmental, safety, and health.&nbsp;</li> <li>Is responsible for allowing and encouraging resolution of environmental, safety, and health issues at the lowest level possible.&nbsp;</li> <li>Is responsible for maintaining the statistics required to closely monitor the environmental, safety, and health of the plant employees.&nbsp;</li> <li>Is responsible for an overall understanding of all Howmet environmental, safety, and health protocols and procedures.&nbsp;</li> <li>Is expected to spend daily "floor time" in the plant to truly know the processes, employees and EHS hazards associated with the plant.&nbsp;</li> <li>Under the sponsorship of the Plant Manager, will be accountable for coordination of an audit program to achieve good or better in all 4 critical protocols.&nbsp;</li> <li>Provides critique and should be plant conscience at all levels, i.e. Plant Manager, Department Managers/Superintendents, Supervisors, crews and environmental, health, and safety committees. Although he/she will attempt to communicate at the appropriate level, he/she will elevate concerns to whatever level of the organization is required to ensure performance and compliance. This is a key success factor.&nbsp;</li> <li>Shall be actively involved in ABS/standardized work design as a means to eliminate exposure to hazards.&nbsp;</li> <li>Manages the Howmet Incident Management System: after consultation with medical and line management, makes the final decision about OSHA recordability of incidents.&nbsp;</li> <li>Provides overall strategic direction of health and safety programs and practices for Howmet Whitehall. Ensures practices are aligned with Howmet’s health and safety standards.</li> <li>Manages expenses and develops budget to control costs while improving health and safety performance and determining risk analysis.</li> <li>Manages the Howmet Health and Safety Self-Assessment process to ensure compliance with all Howmet and applicable government regulations including documentation, reporting, permits, and training.&nbsp; Provides technical support and direction for Howmet health, safety, and medical WWHP compliance practices.</li> <li>Interface with local, state, and federal agencies such as Mi-EGLE, EPA, and OSHA/MIOSHA,.</li> <li>Maintains permits and issue site reports as required by those agencies&nbsp;</li> <li>Keeps current on OSHA, MIOSHA, and USEPA, DOT regulations through literature, seminars and training.</li> <li>Responsible for health and safety program communication.</li></ul>Job Roles&nbsp;<ul> <li>Integrity and conscience--prioritizes safety for people and the environment; monitors activities against regulations and standards; functions as integrated part of the enterprise, not merely outside it as a check and balance</li> <li>Scope and scale--recognizes that responsibilities extend beyond the boundaries of Howmet footprint to community and reputation; considers every individual in every location, every day, every shift; approaches role with the sobriety of potentially life or death</li> <li>Business focus--understands the goal of the business and seeks to enable its functioning; provides alternatives and ideas to maintain compliance without compromise; employs an engineering mindset to reduce human error; anticipates future innovation and opportunities to lead industry or adjust ahead of changes&nbsp;</li> <li>Education hub--creates awareness and shares information proactively; actively monitors changes to governance; invites change through increased understanding throughout the organization; empowers others to self-regulate and care for one another and the organization</li> <li>Manage complexity--understands laws and regulations based on location, process and risk factors; functions as a generalist and SME&nbsp;</li> <li>Formal and informal authority--wields formal authority well, seeks to inform, engage and advocate versus punish; functions as a resource and technical partner</li> <li>Advocate--champions safety culture; protects the organization from liability; identifies blind spots; minimizes individual and organizational risk; creates clear lines of responsibility and comfort in reporting; celebrates culture over mere compliance</li> <li>Clarity and directness--creates and interprets expectations with exactness; disseminates information clearly and concisely; enforces with consistency; holds to principles and speaks the truth to power; not swayed by emotional appeals</li> <li>Consultative--listens well; understands concerns and supplies guidance based on need, not merely requirements; takes a broad perspective to include other areas of the enterprise and individual contributor health</li> <li>Organized--maintains rigor within significant reporting expectations; meets deadlines and communicates needs from others with advance notice</li> <li>Influence without direct authority--provides justification for decisions and direction; presents a compelling case for needed efforts or change to parties with varying interests and priorities; aligns peers and stakeholders to achieve both tangible and anticipated objectives</li></ul>QualificationsBasic Qualifications&nbsp;<ul> <li>Bachelor's Degree from an accredited university</li> <li>Minimum of 5 years of EHS progressive experience in a manufacturing environment</li> <li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li></ul>Preferred Qualifications<ul> <li>BS degree in environmental, health or safety related discipline</li> <li>Professional certification preferred</li> <li>Demonstrated professional with passion for change and relentless focus on execution</li> <li>Knowledge of applicable Federal and State related regulations</li> <li>Strong communication skills, analytical skills, problem solving and human relations skills</li> <li>Ability to make difficult decisions with sometimes and incomplete set of data</li> <li>Critical skills include execution, attention to detail, initiative, conflict resolution, customer focus, collaboration, building ownership and commitment, developing others, establishing and direction, drive for change, tenacity, and getting organization support</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Health & Safety Leader - Whitehall Operations

ResponsibilitiesThis off-shift&nbsp;ACID TECHNICIAN&nbsp;position will be located in our Plant 10, Whitehall Casting Operation.&nbsp; Primary responsibilities will include:<ul> <li>Processes castings through various acid solutions.</li> <li>Inspects grain on casting to customer specifications.</li> <li>Prepares new acid solutions to customer specifications.</li> <li>Complies with all EHS Rules required for the position.</li> <li>Performs other duties as assigned.</li> <li>Must be willing wo work overtime and off-shift as required by production schedules.</li> <li>The work week may include Saturday and Sunday as regular scheduled hours.</li></ul>QualificationsBasic Qualifications:<ul> <li>High school diploma or GED from an accredited institution.</li> <li>Minimum of two years of work experience, or six months continuous manufacturing experience. &nbsp;</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>Preferred Qualifications:<ul> <li>Industrial manufacturing and/or quality control/non-destructive inspection experience.</li> <li>Previous experience with industrial radiography.</li> <li>Basic computer skills.</li> <li>Ability to read and interpret specifications.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

ACID TECHNICIAN - Plant 10

Responsibilities Responsible for daily financial analysis to support Manufacturing, Operations, and Management decisions that will support the&nbsp;segment in reaching its financial goals. Work with&nbsp;Segment Controller and business partners to ensure accurate and timely reporting.&nbsp; <ul> <li>Assist in the preparation of financial statements in compliance with regulatory and accounting guidelines under the supervision of the Controller.</li> <li>Assist in reviewing the monthly balance sheet and profit-and-loss statements</li> <li>Assist with monthly closing and production of financial statements to guarantee timely reporting</li> <li>Review financial statements to ensure that the information reported properly reflects the company’s financial position</li> <li>Assist with budget preparation and income forecasting</li> <li>Accumulate data for the preparation of the monthly financial review with corporate finance</li> <li>Assist with daily reporting to corporate finance</li> <li>Ensure compliance to financial aspects of internal controls</li> <li>Prepare, verify, and control the entering of journal entries to the general ledger</li> <li>Understand manufacturing variances and speak with&nbsp;management providing direction for process changes</li> <li>Support sales teams&nbsp;in maintaining the quote management system and quote process.&nbsp;&nbsp;</li> <li>Perform internal control testing&nbsp;</li> <li>Prepare and understand cost models and translate to financial statement impact</li> <li>Manage and control discretionary spend</li> <li>Perform job duties in a safe and efficient manner</li> <li>Perform other work-related duties as necessary</li> <li>Complies with all Environmental Health &amp; Safety rules.</li> </ul> QualificationsBASIC REQUIREMENTS<ul> <li>Bachelor’s Degree from an accredited institution.</li> <li>Minimum 5 years financial analyst work experience.</li> <li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.&nbsp;</li></ul>PREFERRED QUALIFICATIONS<ul> <li>Master’s Degree from an accredited institution in the following disciplines preferred: Business or Accounting</li> <li>Financial experience working in a manufacturing environment</li> <li>Ability to communicate clearly and concisely in both written and oral form</li> <li>Strong interpersonal and negotiation skills</li> <li>Self-starter</li> <li>Experience with querying databases</li> <li>Excellent analytical skills</li> <li>Experience with cost accounting</li> <li>Collaboration, Interaction, and Communication with Business Partner employee experience preferred</li> <li>Ability to meet critical and tight deadlines</li> <li>Compliance element experience specifically within an internal control environment</li> <li>Monitoring and interpreting financial results experience</li> <li>Ability to forecast and present data to upper-level management</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Assistant Segment Controller

ResponsibilitiesThis off-shift position is located within our Plant 10&nbsp;– Whitehall Casting Operation and will direct and motivate the manufacturing work force to produce products of high quality in the most efficient and safe manner and ensure that scheduling meets business and customer needs.&nbsp;Job Roles&nbsp;<ul> <li>Anticipation--asks questions to understand needs of multiple stakeholder groups; prepares operation for optimal execution; contributes as a strategic partner to planning process</li> <li>Reliability--leads by example; provides goal and measurement information to others; facilitates safe environment; works effectively within parameters of bargaining unit contract</li> <li>Optimizer--improves processes; executes production for maximal output; eliminates waste; increases quality; aligns activity and resources to desired outcomes; sets others up for success</li> <li>Facilitator--interacts with internal and external stakeholders at multiple levels; furnishes accurate instructions to others; acts as liaison between planning, management and execution elements of the business</li> <li>Responsiveness--deals effectively with the unforeseen; modifies labor schedule or other variables as needed based on circumstances</li> <li>Influence-- delegates effectively; capable of explaining the “why” behind a recommendation or directive; advocates for the business; maintains approachability; deals with conflict and change effectively</li> <li>Organization and structure--plans daily; coordinates to deliver on time; ensures efficiencies while balancing priorities of multiple projects and stakeholder groups; has contingency plans</li> <li>Observation--sees and hears through the lens of performance; enables accuracy in scheduling, quality in production and relationship with customers; makes recommendations and changes based on patterns and data; monitors for feedback and communicates findings; sees physical and personnel issues and acts on observations; has a “finger on the pulse” of what occurs within the plant</li> <li>Ownership--accepts accountability for the performance of others and the business; inspires ownership and improvement in others; invites measurement</li></ul>Responsibilities<ul> <li>Supervises an effective team; includes planning and holding meetings, preparing and conducting performance appraisals as appropriate, managing staffing levels (including vacations, overtime, and leaves of absences), assisting with career development (motivates, coaches, and trains to acquire maximum quality, productivity, morale, and cooperation), approving time and attendance, and prioritizing and making work assignments.</li> <li>Provides effective feedback to employees, both positive and negative.&nbsp;Maintains appropriate documentation for all disciplinary actions taken.</li> <li>Provides training and mentoring to new Supervisors.</li> <li>Directs training and orientation of employees to ensure EHS rules are known and understood, to improve work performance, and acquaint employees with company policies and procedures.</li> <li>Maintains compliance with the collective bargaining agreement.&nbsp;Interfaces between management and union officials.&nbsp; Handles grievances.</li> <li>Ensures compliance with company policies, procedures, and practices.</li> <li>Schedules production and work teams.</li> <li>Reviews production and operating reports and resolves operations, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays.</li> <li>Promotes EHS and continuous improvement initiatives and culture.</li> <li>Implements ABS principles and initiatives and is the 6S program leader.</li> <li>Interacts with their employees and other departments in order to manage the flow of product through the operation.</li> <li>Maintains inventories, as applicable.</li> <li>Creates a total awareness among assigned employees of Company policies, regulations, procedures, and business initiatives.&nbsp; Enforces compliance and acts as a positive resource for information and questions.</li> <li>Responds to emergencies.&nbsp; Assists in troubleshooting production problems.&nbsp; Investigates and analyzes.&nbsp; Initiates or recommends actions to correct deviations and variables affecting schedules, costs, quality, and other factors.</li> <li>Prepares and analyzes documentation as required (i.e. production reports, log sheets, etc).</li> <li>Reviews work procedures for safety regulations and concerns.</li> <li>Plans, develops, and implements new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of labor and materials.</li> <li>Confers with management, engineering, and quality control personnel to resolve maintenance problems and recommend measures to improve operations and conditions of machines and equipment.</li> <li>Performs audits for safety compliance; facilitates the 6S audit program.</li> <li>Assists with budget and goal setting of the operation.</li> <li>Complies with all EHS rules required for the work environment.</li> <li>Performs other duties, as assigned.</li></ul>QualificationsBasic Qualifications:<ul> <li>High School Diploma or GED from an accredited institution</li> <li>Minimum of 3 years&nbsp;leadership experience.</li> <li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li></ul>Preferred Qualifications<ul> <li>Experience supervising in a manufacturing environment.</li> <li>Experience with TPM, Synchronous Mfg., and Kaizen Concepts.</li> <li>Must be able to communicate effectively with all levels of the organization, have good team building skills, excellent people skills; ability to handle multiple tasks, technically oriented.</li> <li>Must be energetic and a self-starter, able to promote and implement change, have good PC skills, good telephone skills, strong organizational skills, and ability to promote a continuous improvement atmosphere.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

SUPERVISOR - PLANT 10 - WEEKEND B

ResponsibilitiesThe person in this position will be part of a Plant Engineering team that is responsible for maintenance&nbsp;of the facility and equipment&nbsp;including all manufacturing processes from wax injection thru rough dimensional finishing and NDI testing of finished parts. This group is responsible for the implementation of projects to upgrade existing equipment and systems, coordinates and supports plant rearrangements and assists in the selection, procurement and installation of new equipment to support changes in our manufacturing process.&nbsp; This group also supports the day-to-day operations by acting as a resource for skilled trades and contracted services.QualificationsBasic Qualifications:<ul><li>BS Degree in Electrical Engineering or Electrical Engineering Technology from an accredited institution.</li><li>Previous internship, co-op experience, or previous work experience in a manufacturing environment.</li><li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li></ul>&nbsp;Preferred Qualifications<ul><li>PLC programming experience</li><li>HMI programming experience</li><li>Experience with Allen Bradley PLC, &nbsp;RS Logix &amp; Studio 5000.</li><li>Experience with Wonderware, IFIX &amp; SCADA’S.</li><li>Knowledge of Electrical distribution systems for voltage below 600V</li><li>Proficient user of AutoCAD and AutoCAD Electrical</li><li>Experience with industrial robots, Moto man or other.</li><li>Knowledge of NEC, NFPA 70E and NFPA 79</li><li>Able to troubleshoot Hydraulic and Pneumatic systems.</li><li>Familiar with thermocouples, RTD’s, Transmitters and Flowmeters.</li><li>Knowledge of Frequency Drives.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

114 Full Time Jobs in Whitehall, MI 49461, USA