field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

ResponsibilitiesThis position will be located in Plant 3, Whitehall Casting Operation, and will support manufacturing by providing focused projects that will improve throughput, reduce inventory &amp; reduce operating expense. This position will drive reduction of labor costs through cellular manufacturing and new/improved methods &amp; equipment. Must be able to apply standard practices and techniques, adjust and correlate data, recognize discrepancies in results and take corrective action. Will document work, prepare technical notes/reports/documents and establish customer contacts (internal &amp; external) as required.ResponsibilitiesThis position is responsible for developing manufacturing methods to produce parts that consistently meet or exceed our customers’ requirements. Also, continuous improvement of processes by improving methods and developing new methods of manufacturing, leading to increased yields and reduced labor content.&nbsp;<ul> <li>Conceives, evaluates and implements problem solving activities, cost reduction initiatives and part/process improvement activities.</li> <li>External customer escapes - Investigates and analyzes root cause. Develops and implements correction action plans.</li> <li>General Technical Support - Collects data and answers customer requests.&nbsp;</li> <li>Quotation Prep - Develops material, scrap and labor costs for cost modeling.</li> <li>Tooling Development and Build - Attends NPI meeting and provides input based on customer specifications for BOM, routings and milestone plans. Provides manufacturing support fixtures and dies.</li> <li>Process Development - Provides manufacturing support for prototypes, instructions and data analysis.</li> <li>Equipment Design, Build and Procure - Troubleshoots, validates and qualifies equipment.</li> <li>Cell and Standard Work Development - Conducts time studies. &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Develops cell layout</li> <li>Part Number Scrap Reduction and Yield Improvement - Collects data and analysis. Attends QSI meeting</li> <li>Floor Coverage and Support - Completes general daily process walk through.&nbsp; Collects data and analysis</li> <li>Standard Labor and Process Time Reduction - Analyzes shift labor efficiencies and affectivities. Conducts cost modeling. Implements tooling change</li> <li>Deviant Part Review and Disposition - Reviews scrap in all areas</li></ul>Job Roles&nbsp;<ul> <li>Systems thinker--sees the business and its operation holistically; understands actions and reactions; considers multiple pathways of potential effect before decisions; thinks strategically about interventions with an eye toward scale</li> <li>Optimizer--constantly challenging the organization to work smarter; supports others to ensure they have what they need to do their work successfully</li> <li>Anticipation--looks ahead to minimize potential issues and maximize advantages; prepares others for what comes next</li> <li>Operational accelerator--drives continuous improvement; understands ramifications of automation and other advances; advocates for safety, ergonomics and scalable solutions</li> <li>Organization and structure--works within existing structures while striving to improve and standardize them; provides accurate information; galvanizes others toward common goals</li> <li>Influence--leverages knowledge, relationship, data and perspective to persuade, educate and navigate; gains buy in and adoption of ideas and practices at scale; interacts with a variety of stakeholders</li> <li>Data informed--focused on things that drive quantifiable business outcomes; evaluates based on quantitative feedback; knows and explains the “why” behind actions</li> <li>Prioritized reaction--handles the unexpected without losing sight of important objectives; reacts where greatest leverage points exist</li> <li>Relationship--connects individually and with teams across shifts and practices; builds rapport and commonality; creates a “win together” ethic; serves as liaison between shop floor and engineering; keeps the pulse of the floor; helps people feel heard</li></ul>QualificationsBasic Qualifications:<ul> <li>BS Degree in Engineering from an accredited institution.</li> <li>Employees must be legally authorized to work in the United States.&nbsp;Verification of employment eligibility will be required at the time of hire.&nbsp;Visa sponsorship is not available for this position.</li></ul>Preferred Qualifications<ul> <li>Previous internship, co-op experience, or previous work experience in a manufacturing environment or lab environment.</li> <li>BS degree in Manufacturing, Industrial, Mechanical Engineering or Manufacturing Technology&nbsp;</li> <li>Experience in Kaizen, continuous improvement and formal problem solving.&nbsp;</li> <li>Excellent analytical skills, verbal &amp; written communication skills (such as Standard Operating Procedure development)</li> <li>Ability to perform and analyze time studies to develop standardized work and set labor standards.</li> <li>Ability to create capacity analysis tools that capture machine cycle times, workloads and OEE.</li> <li>Experience in the implementation of improved manufacturing processes, such as new and better equipment (including defining scope of work, technology research, quote procurement from vendors, budget setting, equipment installation and start-up, project management of improvement projects)&nbsp;</li> <li>Experience in defining and implementing cell layout, plant layout and ergonomically designed workstations.</li> <li>Experience in export control regulations (commercial and/or military shipments across international borders)&nbsp;</li> <li>Utilization of observation skills to drive NVA (Non-Value Add) waste elimination, reduced operation cycle times and product flow analysis.&nbsp;</li> <li>Ability to provide technical leadership and guidance to the manufacturing areas through the use of cross-functional teams.&nbsp;</li> <li>Ability to read and interpret blueprints.</li> <li>Experience with CAD (2D and/or 3D)</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

Manufacturing Engineer

ResponsibilitiesThis position will be in our Plant 10, Whitehall Casting Operation, and will plan, develop, and implement new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of labor and materials. Participate in plant safety inspections and housekeeping audits.&nbsp; This position will be responsible for deployment of ABS and EHS improvements across the shifts, focusing on employee engagement.Responsibilities<ul> <li>Supervises an effective team; includes planning and holding meetings to flow down information, preparing and conducting performance appraisals as appropriate, managing staffing levels (including vacations, overtime, and leaves of absences), assisting with career development (motivates, coaches, and trains to acquire maximum quality, productivity, morale, and cooperation), approving time and attendance, and prioritizing and making work assignments.</li> <li>Provides effective feedback to employees, both positive and negative.&nbsp; Maintains appropriate documentation for all disciplinary actions taken.</li> <li>Directs training and orientation of employees to ensure EHS rules are known and understood, to improve work performance and culture, and acquaint employees with company policies, practices,&nbsp;procedures and business initiatives.</li> <li>Maintains compliance with the collective bargaining agreement.&nbsp; Interfaces between management and union officials.&nbsp; Handles grievances.</li> <li>Reviews production and operating reports and resolves operations, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays.</li> <li>Investigates and analyzes.&nbsp; Initiates or recommends actions to correct deviations and variables affecting schedules, costs, quality, and other factors.</li> <li>Requisitions tools, equipment, and supplies required for operations and ensures employees have understanding of tools available (including the help chain).</li> <li>Confers with management, engineering, and quality control personnel to resolve maintenance problems and recommend measures to improve operations and conditions of machines and equipment.</li> <li>Reviews work procedures for safety regulations and concerns.</li> <li>Plans, develops, and implements new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of labor and materials.</li> <li>Participates in plant safety inspections and housekeeping audits.</li> <li>Complies with all EHS rules required for the work environment.</li> <li>Performs other duties, as assigned.</li></ul>Job Roles&nbsp;<ul> <li>Systems thinking--thinks about the entire plant as a system; understands the importance of manufacturing in the context of the entire operation; works to eliminate silos between shifts and departments</li> <li>Measurement oriented--proactive to drive critical measures such as safety, quality, LU; prioritizes action based on net result</li> <li>Relationship builder--interacts up, down and across the organizational position structure; minimizes escalations through relationship and handles them where they exist; mentors and develops others</li> <li>Facilitator--knows the “how” and “what” of multiple areas of the enterprise; eliminates roadblocks for others; responds quickly to issues and ensures quality; translates policies and planning to supervisory group; able to act on limited information when necessary</li> <li>Advocate--ensures customer specifications are met; represents manufacturing interests with planning group; ensures supervisors have resources and resolution to issues; drives continuous improvement</li> <li>Tactician strategist--understands both the next best move and what needs to happen today; balances the immediate with the strategic; responds and plans; reacts and anticipates</li> <li>Organization and structure--plans daily; coordinates through others to deliver; ensures efficiencies while balancing priorities of multiple projects and stakeholder groups</li> <li>Autonomy--functions well with limited direction; comfortable making decisions and giving direction; accepts feedback and constructive criticism regarding actions taken</li></ul>QualificationsBasic Qualifications:<ul> <li>High school diploma or GED from an accredited institution.</li> <li>5+ years working in a manufacturing environment OR 1 year of Howmet supervisory/leadership experience.</li> <li>5+ years supervisory/managerial experience.</li> <li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li></ul>Preferred Qualifications<ul> <li>BS Degree in Engineering or Business</li> <li>Experience in the investment casting industry a plus</li> <li>Ability to effectively present information and respond to questions from customers, managers, and employees.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Manufacturing Leader - Plant 10 - Weekend Crew

ResponsibilitiesThe Manufacturing Manager is responsible for providing leadership in manufacturing excellence, ensuring customer satisfaction and continuous improvement of plant performance measurements (quality, productivity, cycle time, delivery and cash flow).&nbsp; This position provides direction for hourly and manufacturing support employees.Job Responsibilities<ul> <li>Follow Safety Regulations along with all department specific safety requirements</li> <li>OEE</li> <li>Production Value Added by department</li> <li>Daily targets for shipments</li> <li>Profit/Revenue</li> <li>Ensure the safety of all employees by promoting a clean and safe work environment.</li> <li>Improve manufacturing planning, execution, and shop floor discipline.</li> <li>Provide leadership for Plant ABS and lean manufacturing initiatives.</li> <li>Provide leadership to identify and remove non-value-added waste.</li> <li>Improve product flow and/or implement method improvements to reduce labor content.</li> <li>Develop and train for the professional and personal growth of team leaders, cell facilitators, supervisors and other manufacturing support personnel.</li> <li>Address any safety issues or non- compliances immediately.</li> <li>Promote Injury Free Event (IFE) reporting</li> <li>Accountable for applicable department budgets.</li> <li>Maintain good relations and communication with Howmet customers.</li> <li>Develop with plant manager and staff budget, strategic plans, team goals and objectives that align with BU objectives.</li> <li>Flow down goals and objectives to the entire organization.</li> <li>Contribute to other location specific and corporate teams.</li> <li>Maintain excellent delivery performance.</li> <li>Conduct capacity analysis to drive standard work and ensure accuracy of standards.</li> <li>Drive cost reductions to improve profitability.</li> <li>Use lean manufacturing tools to reduce WIP and cycle time.</li> <li>Communicate all relevant information to Staff, customers and management.</li> <li>Understand constraint management, OEE and apply techniques that exploit constraints to improve OEE.</li> <li>Provide leadership in implementing continuous improvement methods and ideas.</li> <li>Consults with engineering personnel relative to modifications to the process in order to improve production and quality of the products.</li> <li>Provide leadership in a safety and continuous improvement initiatives.</li></ul>Job Roles<ul> <li>Empowering talent--identifies and removes obstacles to productivity at individual and systemic levels; inspires and equips people to perform; understands direct link between people and measurable performance; provides cross-training opportunities.</li> <li>Flexibility--responds readily to a variety of stimuli in an environment where every day can be different; capable of multitasking and moving quickly from one topic to another; employs different mindsets or perspectives situationally</li> <li>Organized and time conscious--manages time well; does what is needed efficiently; understands how long processes require and manages expectations accordingly; navigates the tension between availability and proactivity&nbsp;</li> <li>Business-minded--aligns people and resources to demand; forecasts need and synthesizes input to anticipate focus areas on a time and project basis; thorough understanding of business enables quick decisions where appropriate</li> <li>Interpretation and synthesis--makes sense of multiple inputs quickly and efficiently; generates action plans from available information; interprets data and qualitative information to provide justification and purpose; rationalizes decision making with substantive reasoning; understands relevant numbers and trends</li> <li>Rigor--participates in audit processes; utilizes existing systems extensively and expertly; solicits information from shift level to enterprise; creates processes through continuous improvement</li> <li>Team orientation--often involved at a tactical level; can contribute technically or operationally if needed, though not as first option; retains authority while delegating ownership</li> <li>Trust and relationship--communicates openly and regularly, maintaining information flow; visible on floor; focuses attention on strengths and achievements, while addressing shortcomings as needed</li> <li>Ingenuity--finds efficiencies and gains time closer to delivery; solicits and implements ideas; invites improvement from any sector or level</li> <li>Professional posture--handles escalations objectively and dispassionately; recasts difficult situations as opportunities for learning and growth; custodian of plant environment and brand</li></ul>QualificationsBasic Qualifications:<ul> <li>High school diploma or GED from an accredited institution.</li> <li>7+ years experience in leadership roles within a manufacturing environment; 3 of the 7&nbsp;years must be as a supervisor in a manufacturing environment.</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>Preferred Qualifications:<ul> <li>BA/BS in Business Administration or Engineering from an accredited institution.</li> <li>Experience in the investment casting industry a plus.</li> <li>Strong leadership skills that create an engaged employee environment.</li> <li>Able to drive improvement through the implementation of the lean manufacturing principles, total quality practices, six sigma.</li> <li>A strong technical understanding of manufacturing processes.&nbsp;</li> <li>Strong analytical, problem solving, communication, interpersonal, organizational and negotiation skills.</li> <li>Strong financial literacy</li> <li>Experience with tooling, molds and dies relating to the Investment Casting, Injection Molding, or Stamping Industries is preferred.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Manufacturing Manager - Plant 4 - Ti-Ingot

Warehouse Selector Ready to get your work done and go home, while earning great income? Our warehouse selectors work 4 days per week, average between 40-50 hours per week, &amp; start making $20.75 per hour. Our warehouse teammates move product through our DCs quickly and safely, ensuring orders are filled and loaded for deliveries. McLane promotes earning, learning, and living a great life. We are a team, and we want to work with you. So, here's the details: <ul><li>$20.75 starting rate. Increase at your pace post training to $25.55/full production. </li><li>The ability to be flexible with your schedule is preferred. </li><li>Two days off during the week plus Saturdays. </li><li>Generous benefits such as medical, dental, and vision insurance and company-paid life insurance start on your 60th day. </li><li>401(k) Profit Sharing Plan after 90 days.</li><li>Paid holidays, vacation time, educational assistance program, and more! </li></ul> MINIMUM QUALIFICATIONS &amp; REQUIREMENTS: <ul><li>At least 18 years of age.</li><li>Minimum 1-year order selecting experience.</li></ul> Candidates may be subject to a background check and drug screen, in accordance with applicable laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

McLane

Warehouse Specialist I

ResponsibilitiesUnder the direction of the Lead Continuous Improvement Engineer , this position is responsible for supporting and assisting the Continuous Improvement Organization (Business Unit and Manufacturing Plants) as “boots on the ground” in the organization, planning, implementation, and follow-through of manufacturing improvement initiatives.&nbsp; Correspondingly, the incumbent coordinates and leads a wide range of activities that are designed to improve on-time delivery, productivity, quality, cost, safety, and environmental performance. This position does not directly supervise other personnel. Additionally, this position supports Operations Supervisors, Area Leads, and Plant Managers.This position is located 5 minutes from beautiful Lake Michigan in Whitehall, Michigan. &nbsp;Popular neighboring cities include Grand Rapids and Muskegon.Key Objectives<ul> <li>Work out of the Whitehall, MI site as part of a team to reduce executional scrap&nbsp;</li> <li>Create a system following ‘step by step’ procedures for the loading and unloading of large volume processing equipment.</li> <li>Complete time studies in various processes and identify opportunities for improvement.</li> <li>Perform shopfloor observations, working with Manufacturing employees to document current and target conditions.&nbsp; Eliminate non-value-added activities while working on scrap reduction activities.</li> <li>Participate in the Howmet Business System implementation of continuous improvement initiatives and drive waste reductions utilizing Lean principles (JIT, Autonomation, Value Stream Mapping, Kaizen, 5S, Standard Work, Line/Cell Design, Single Piece Flow, Material Flow, Visual Management, SMED, TPM, Root Cause Problem Solving, etc.)</li> <li>Coordinate with resource departments within the assigned locations to fabricate, install, and implement improvements to drive waste down and increase efficiency and output.</li> <li>Collaborate in Kaizen activities, problem solving, and rapid improvement process events with both internal and external consultants, customers, and suppliers. This includes providing support to sustain all follow-throughs required to sustain the improvements initiated during those events, especially those concentrated on local improvement. &nbsp;</li> <li>Performing other duties as assigned.</li></ul>Job Dimensions:The incumbent will possess:<ul> <li>Willingness to work with shopfloor employees, interview, and document current condition</li> <li>Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation.</li> <li>Strong analytical and problem-solving skills: able to develop and use structured approaches to identify root causes and recommend resolutions</li> <li>Ability to manage multiple projects simultaneously to meet objectives and key deadlines</li></ul>QualificationsBasic Qualifications:<ul> <li>Bachelor of Science degree in Engineering from an accredited institution&nbsp;</li> <li>Must have excellent interpersonal and communication skills as well as exhibit initiative and a high level of energy</li> <li>Must be willing to spend time on the manufacturing shopfloor to learn and interact with employees</li> <li>Exhibit teamwork and go-getting attitude</li> <li>Good analytical/statistical problem-solving skills</li> <li>Must be able to work 2nd or 3rd shift</li> <li>Strong working knowledge of Microsoft Office Suite, including Word, Excel and PowerPoint</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>Preferred Qualifications:<ul> <li>Bachelor’s degree in mechanical or industrial engineering</li> <li>Exceptional Excel Spreadsheet creation, macros, and related data analysis skills</li></ul>The incumbent shall take such steps as necessary to assure that all employment practices under his/her control, including hiring, firing, promotions, and discipline, are conducted in a nondiscriminatory fashion and without regard to race, sex, religion, national origin, age or physical disability.&nbsp; Incumbent recognizes that accident prevention is equal to quality, production, delivery, and cost control and accepts the responsibility to work safety while promoting safety conscious among fellow employees.About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Manufacturing Engineer - Entry Level, Continuous Improvement

ResponsibilitiesHowmet Aerospace, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit&nbsp;<a href="http://www.howmet.com/" target="_blank">www.howmet.com</a>.&nbsp;Follow @howmet:&nbsp;Twitter,&nbsp;Instagram,&nbsp;Facebook,&nbsp;LinkedIn&nbsp;and&nbsp;YouTube.&nbsp;Will support manufacturing by providing focused projects that will improve throughput, reduce inventory &amp; reduce operating expense. This position will drive reduction of labor costs through cellular manufacturing and new/improved methods &amp; equipment. Must be able to apply standard practices and techniques, adjust and correlate data, recognize discrepancies in results and take corrective action. Will document work, prepare technical notes/reports/documents, and establish customer contacts (internal &amp; external) as required.Must have the ability to travel to other Howmet locations in the Airfoils Segment.Job Roles&nbsp;<ul> <li>Systems thinker--sees the business and its operation holistically; understands actions and reactions; considers multiple pathways of potential effect before decisions; thinks strategically about interventions with an eye toward scale</li> <li>Optimizer--constantly challenging the organization to work smarter; supports others to ensure they have what they need to do their work successfully</li> <li>Anticipation--looks ahead to minimize potential issues and maximize advantages; prepares others for what comes next</li> <li>Operational accelerator--drives continuous improvement; understands ramifications of automation and other advances; advocates for safety, ergonomics and scalable solutions</li> <li>Organization and structure--works within existing structures while striving to improve and standardize them; provides accurate information; galvanizes others toward common goals</li> <li>Influence--leverages knowledge, relationship, data and perspective to persuade, educate and navigate; gains buy in and adoption of ideas and practices at scale; interacts with a variety of stakeholders</li> <li>Data informed--focused on things that drive quantifiable business outcomes; evaluates based on quantitative feedback; knows and explains the “why” behind actions</li> <li>Prioritized reaction--handles the unexpected without losing sight of important objectives; reacts where greatest leverage points exist</li> <li>Relationship--connects individually and with teams across shifts and practices; builds rapport and commonality; creates a “win together” ethic; serves as liaison between shop floor and engineering; keeps the pulse of the floor; helps people feel heard</li></ul>ResponsibilitiesThis position is responsible for developing manufacturing methods to produce parts that consistently meet or exceed our customers’ requirements.&nbsp; Also, continuous improvement of processes by improving methods and developing new methods of manufacturing, leading to increased yields and reduced labor content.&nbsp;<ul> <li>Conceives, evaluates and implements problem solving activities, cost reduction initiatives and part/process improvement activities.</li> <li>External customer escapes - Investigates and analyzes root cause. Develops and implements correction action plans.</li> <li>General Technical Support - Collects data and answers customer requests.&nbsp;</li> <li>Quotation Prep - Develops material, scrap and labor costs for cost modeling.</li> <li>Tooling Development and Build - Attends NPI meeting and provides input based on customer specifications for BOM, routings and milestone plans.&nbsp;Provides manufacturing support fixtures and dies.</li> <li>Process Development - Provides manufacturing support for prototypes, instructions and data analysis.</li> <li>Equipment Design, Build and Procure - Troubleshoots, validates and qualifies equipment.</li> <li>Cell and Standard Work Development - Conducts time studies. &nbsp;Develops cell layout</li> <li>Part Number Scrap Reduction and Yield Improvement - Collects data and analysis. Attends QSI meeting</li> <li>Floor Coverage and Support - Completes general daily process walk through.&nbsp;Collects data and analysis</li> <li>Standard Labor and Process Time Reduction - Analyzes shift labor efficiencies and affectivities.&nbsp; Conducts cost modeling.&nbsp; Implements tooling change</li> <li>Deviant Part Review and Disposition - Reviews scrap in all areas</li></ul>QualificationsBASIC QUALIFICATIONS:<ul> <li>BS Degree in Engineering from an accredited institution.</li> <li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li></ul>PREFERRED QUALIFICATIONS:<ul> <li>Previous internship, co-op experience, or previous work experience in a manufacturing environment or lab environment.</li> <li>BS degree in Manufacturing, Industrial, Mechanical Engineering or Manufacturing Technology &nbsp;</li> <li>Experience in Kaizen, continuous improvement and formal problem solving.&nbsp;&nbsp;</li> <li>Excellent analytical skills, verbal &amp; written communication skills (such as Standard Operating Procedure development)</li> <li>Ability to perform and analyze time studies to develop standardized work and set labor standards.</li> <li>Ability to create capacity analysis tools that capture machine cycle times, workloads and OEE.</li> <li>Experience in the implementation of improved manufacturing processes, such as new and better equipment (including defining scope of work, technology research, quote procurement from vendors, budget setting, equipment installation and start-up, project management of improvement projects)&nbsp;</li> <li>Experience in defining and implementing cell layout, plant layout and ergonomically designed workstations.</li> <li>Experience in export control regulations (commercial and/or military shipments across international borders)&nbsp;</li> <li>Utilization of observation skills to drive NVA (Non-Value Add) waste elimination, reduced operation cycle times and product flow analysis.&nbsp;</li> <li>Ability to provide technical leadership and guidance to the manufacturing areas through the use of cross-functional teams.&nbsp;</li> <li>Ability to read and interpret blueprints.</li> <li>Experience with CAD (2D and/or 3D)</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

MANUFACTURING ENGINEER

ResponsibilitiesThis position will be located in Plant 5, Ti-Cast Operation, and will support manufacturing by providing focused projects that will improve throughput, reduce inventory &amp; reduce operating expense. This position will drive reduction of labor costs through cellular manufacturing and new/improved methods &amp; equipment. Must be able to apply standard practices and techniques, adjust and correlate data, recognize discrepancies in results and take corrective action. Will document work, prepare technical notes/reports/documents and establish customer contacts (internal &amp; external) as required.Job Roles&nbsp;<ul> <li>Systems thinker--sees the business and its operation holistically; understands actions and reactions; considers multiple pathways of potential effect before decisions; thinks strategically about interventions with an eye toward scale</li> <li>Optimizer--constantly challenging the organization to work smarter; supports others to ensure they have what they need to do their work successfully</li> <li>Anticipation--looks ahead to minimize potential issues and maximize advantages; prepares others for what comes next</li> <li>Operational accelerator--drives continuous improvement; understands ramifications of automation and other advances; advocates for safety, ergonomics and scalable solutions</li> <li>Organization and structure--works within existing structures while striving to improve and standardize them; provides accurate information; galvanizes others toward common goals</li> <li>Influence--leverages knowledge, relationship, data and perspective to persuade, educate and navigate; gains buy in and adoption of ideas and practices at scale; interacts with a variety of stakeholders</li> <li>Data informed--focused on things that drive quantifiable business outcomes; evaluates based on quantitative feedback; knows and explains the “why” behind actions</li> <li>Prioritized reaction--handles the unexpected without losing sight of important objectives; reacts where greatest leverage points exist</li> <li>Relationship--connects individually and with teams across shifts and practices; builds rapport and commonality; creates a “win together” ethic; serves as liaison between shop floor and engineering; keeps the pulse of the floor; helps people feel heard</li></ul>ResponsibilitiesThis position is responsible for developing manufacturing methods to produce parts that consistently meet or exceed our customers’ requirements.&nbsp; Also, continuous improvement of processes by improving methods and developing new methods of manufacturing, leading to increased yields and reduced labor content.&nbsp;<ul> <li>Conceives, evaluates and implements problem solving activities, cost reduction initiatives and part/process improvement activities.</li> <li>External customer escapes - Investigates and analyzes root cause. Develops and implements correction action plans.</li> <li>General Technical Support - Collects data and answers customer requests.&nbsp;</li> <li>Quotation Prep - Develops material, scrap and labor costs for cost modeling.</li> <li>Tooling Development and Build - Attends NPI meeting and provides input based on customer specifications for BOM, routings and milestone plans.&nbsp; Provides manufacturing support fixtures and dies.</li> <li>Process Development - Provides manufacturing support for prototypes, instructions and data analysis.</li> <li>Equipment Design, Build and Procure - Troubleshoots, validates and qualifies equipment.</li> <li>Cell and Standard Work Development - &nbsp;Conducts time studies. &nbsp;&nbsp;Develops cell layout</li> <li>Part Number Scrap Reduction and Yield Improvement - Collects data and analysis. Attends QSI meeting</li> <li>Floor Coverage and Support - Completes general daily process walk through.&nbsp; Collects data and analysis</li> <li>Standard Labor and Process Time Reduction - Analyzes shift labor efficiencies and affectivities.&nbsp; Conducts cost modeling.&nbsp; Implements tooling change</li> <li>Deviant Part Review and Disposition - Reviews scrap in all areas</li></ul>QualificationsBasic Qualifications:<ul> <li>BS Degree in Engineering from an accredited institution.</li> <li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li></ul>&nbsp;Preferred Qualifications<ul> <li>Previous internship, co-op experience, or previous work experience in a manufacturing environment or lab environment.</li> <li>BS degree in Manufacturing, Industrial, Mechanical Engineering or Manufacturing Technology &nbsp;</li> <li>Experience in Kaizen, continuous improvement and formal problem solving.&nbsp;&nbsp;</li> <li>Excellent analytical skills, verbal &amp; written communication skills (such as Standard Operating Procedure development)</li> <li>Ability to perform and analyze time studies to develop standardized work and set labor standards.</li> <li>Ability to create capacity analysis tools that capture machine cycle times, workloads and OEE.</li> <li>Experience in the implementation of improved manufacturing processes, such as new and better equipment (including defining scope of work, technology research, quote procurement from vendors, budget setting, equipment installation and start-up, project management of improvement projects)&nbsp;</li> <li>Experience in defining and implementing cell layout, plant layout and ergonomically designed work stations.</li> <li>Experience in export control regulations (commercial and/or military shipments across international borders)&nbsp;</li> <li>Utilization of observation skills to drive NVA (Non-Value Add) waste elimination, reduced operation cycle times and product flow analysis.&nbsp;</li> <li>Ability to provide technical leadership and guidance to the manufacturing areas through the use of cross-functional teams.&nbsp;</li> <li>Ability to read and interpret blueprints.</li></ul>Experience with CAD (2D and/or 3D)About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

MANUFACTURING ENGINEER - Plant 5 - Ti-Cast

ResponsibilitiesThis position will be located in Plant 10, Whitehall Casting Operation, and will support manufacturing by providing focused projects that will improve throughput, reduce inventory &amp; reduce operating expense. This position will drive reduction of labor costs through cellular manufacturing and new/improved methods &amp; equipment. Must be able to apply standard practices and techniques, adjust and correlate data, recognize discrepancies in results and take corrective action. Will document work, prepare technical notes/reports/documents, and establish customer contacts (internal &amp; external) as required.Job Roles&nbsp;<ul> <li>Systems thinker--sees the business and its operation holistically; understands actions and reactions; considers multiple pathways of potential effect before decisions; thinks strategically about interventions with an eye toward scale</li> <li>Optimizer--constantly challenging the organization to work smarter; supports others to ensure they have what they need to do their work successfully</li> <li>Anticipation--looks ahead to minimize potential issues and maximize advantages; prepares others for what comes next</li> <li>Operational accelerator--drives continuous improvement; understands ramifications of automation and other advances; advocates for safety, ergonomics and scalable solutions</li> <li>Organization and structure--works within existing structures while striving to improve and standardize them; provides accurate information; galvanizes others toward common goals</li> <li>Influence--leverages knowledge, relationship, data and perspective to persuade, educate and navigate; gains buy in and adoption of ideas and practices at scale; interacts with a variety of stakeholders</li> <li>Data informed--focused on things that drive quantifiable business outcomes; evaluates based on quantitative feedback; knows and explains the “why” behind actions</li> <li>Prioritized reaction--handles the unexpected without losing sight of important objectives; reacts where greatest leverage points exist</li> <li>Relationship--connects individually and with teams across shifts and practices; builds rapport and commonality; creates a “win together” ethic; serves as liaison between shop floor and engineering; keeps the pulse of the floor; helps people feel heard</li></ul>ResponsibilitiesThis position is responsible for developing manufacturing methods to produce parts that consistently meet or exceed our customers’ requirements.&nbsp; Also, continuous improvement of processes by improving methods and developing new methods of manufacturing, leading to increased yields and reduced labor content.&nbsp;<ul> <li>Conceives, evaluates and implements problem solving activities, cost reduction initiatives and part/process improvement activities.</li> <li>External customer escapes - Investigates and analyzes root cause. Develops and implements correction action plans.</li> <li>General Technical Support - Collects data and answers customer requests.&nbsp;</li> <li>Quotation Prep - Develops material, scrap and labor costs for cost modeling.</li> <li>Tooling Development and Build - Attends NPI meeting and provides input based on customer specifications for BOM, routings and milestone plans.&nbsp;Provides manufacturing support fixtures and dies.</li> <li>Process Development - Provides manufacturing support for prototypes, instructions and data analysis.</li> <li>Equipment Design, Build and Procure - Troubleshoots, validates and qualifies equipment.</li> <li>Cell and Standard Work Development - Conducts time studies. &nbsp;Develops cell layout</li> <li>Part Number Scrap Reduction and Yield Improvement - Collects data and analysis. Attends QSI meeting</li> <li>Floor Coverage and Support - Completes general daily process walk through.&nbsp;Collects data and analysis</li> <li>Standard Labor and Process Time Reduction - Analyzes shift labor efficiencies and affectivities.&nbsp; Conducts cost modeling.&nbsp; Implements tooling change</li> <li>Deviant Part Review and Disposition - Reviews scrap in all areas</li></ul>QualificationsBASIC QUALIFICATIONS:<ul> <li>BS Degree in Engineering from an accredited institution.</li> <li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li></ul>PREFERRED QUALIFICATIONS:<ul> <li>Previous internship, co-op experience, or previous work experience in a manufacturing environment or lab environment.</li> <li>BS degree in Manufacturing, Industrial, Mechanical Engineering or Manufacturing Technology &nbsp;</li> <li>Experience in Kaizen, continuous improvement and formal problem solving.&nbsp;&nbsp;</li> <li>Excellent analytical skills, verbal &amp; written communication skills (such as Standard Operating Procedure development)</li> <li>Ability to perform and analyze time studies to develop standardized work and set labor standards.</li> <li>Ability to create capacity analysis tools that capture machine cycle times, workloads and OEE.</li> <li>Experience in the implementation of improved manufacturing processes, such as new and better equipment (including defining scope of work, technology research, quote procurement from vendors, budget setting, equipment installation and start-up, project management of improvement projects)&nbsp;</li> <li>Experience in defining and implementing cell layout, plant layout and ergonomically designed workstations.</li> <li>Experience in export control regulations (commercial and/or military shipments across international borders)&nbsp;</li> <li>Utilization of observation skills to drive NVA (Non-Value Add) waste elimination, reduced operation cycle times and product flow analysis.&nbsp;</li> <li>Ability to provide technical leadership and guidance to the manufacturing areas through the use of cross-functional teams.&nbsp;</li> <li>Ability to read and interpret blueprints.</li> <li>Experience with CAD (2D and/or 3D)</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Manufacturing Engineer - Plant 10

ResponsibilitiesUnder the direction of the Lead Engineer for Continuous Improvement, this position is responsible for supporting and assisting the Continuous Improvement Organization (Business Unit and Manufacturing Plants) as “boots on the ground” in the organization, planning, implementation, and follow-through of manufacturing improvement initiatives.&nbsp; Correspondingly, the incumbent coordinates and leads a wide range of activities that are designed to improve on-time delivery, productivity, quality, cost, safety, and environmental performance. This position does not directly supervise other personnel. This position does support&nbsp;Operations Supervisors, Area Leads, and Plant Managers.This position is located 5 minutes from beautiful Lake Michigan in Whitehall, MI Popular neighboring cities include Grand Rapids and Muskegon.&nbsp;Key Objectives:<ul> <li>Participate in the Howmet Business System implementation of continuous improvement initiatives and drive waste reductions utilizing Lean principles (JIT, Autonomation, Value Stream Mapping, Kaizen, 5S, Standard Work, Line/Cell Design, Single Piece Flow, Material Flow, Visual Management, SMED, TPM, Root Cause Problem Solving, etc.)</li> <li>Work out of the Whitehall, MI site as part of a team to reduce executional scrap&nbsp;</li> <li>Create a system following ‘step by step’ procedures for the loading and unloading of large volume processing equipment.</li> <li>Coordinate with resource departments within the assigned locations to fabricate, install, and implement improvements to drive waste down and increase efficiency and output.</li> <li>Develop Value Stream maps of key processes and product flows. Define the current condition of the facility(ies) to identify opportunities and create a target condition, with action plans to improve operational and financial results.</li> <li>Complete value stream mapping, identify opportunities, and lead shopfloor manufacturing efforts in process reengineering and process improvements in various plants.&nbsp;</li> <li>Facilitate successful kaizen, problem solving, and rapid improvement process events with both internal and external consultants, customers, and suppliers. This includes providing support to sustain all follow-throughs required to sustain the improvements initiated during those events, especially those concentrated on local improvement. &nbsp;</li> <li>Performing other duties as assigned.</li></ul>Job Dimensions:The incumbent will possess:<ul> <li>Demonstrated experience in manufacturing improvement techniques, including flow principles, Kanban, and plan for every part (PFEP)</li> <li>Expertise in value stream mapping and associated improvement methodologies</li> <li>Understanding of pillars of Toyota production system (JIT, Autonomation)</li> <li>Experience evaluating TAKT time vs. cycle time, determining work area constraints (i.e. cycle time constraint, periodic work constraints, downtime constraints).</li> <li>Experience on shop floor, working with employees, and enhancing manufacturing processes</li> <li>Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation.</li> <li>Strong analytical and problem-solving skills: able to develop and use structured approaches to identify root causes and recommend resolutions</li> <li>Demonstrated experience in project leadership and project management skills, with ability to manage multiple projects simultaneously to meet objectives and key deadlines</li></ul>QualificationsBasic Qualifications:<ul> <li>At least two years&nbsp;of experience in manufacturing environments in areas such as: Operations, Engineering, Supply Chain, Quality, or Operational Excellence</li> <li>Bachelor of Science degree in Engineering from an accredited institution</li> <li>Must have knowledge and understanding of Continuous Process Improvement methodologies such as Lean and Six Sigma</li> <li>Must have excellent interpersonal and communication skills as well as exhibit initiative and a high level of energy</li> <li>Must be willing to spend time on the manufacturing shop floor to learn and interact with employees</li> <li>Ability to manage multiple projects simultaneously and drive change</li> <li>Exhibit teamwork and go-getting attitude</li> <li>Good analytical/statistical problem-solving skills</li> <li>Strong working knowledge of Microsoft Office Suite, including Word, Excel and PowerPoint</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>Preferred Qualifications:<ul> <li>Bachelors degree in Mechanical or &nbsp;Industrial Engineering is preferred</li> <li>Exceptional Excel Spreadsheet creation, macros, and related data analysis skills</li> <li>Three or more years of related experience highly desired</li></ul>The incumbent shall take such steps as necessary to assure that all employment practices under his/her control, including hiring, firing, promotions, and discipline, are conducted in a nondiscriminatory fashion and without regard to race, sex, religion, national origin, age or physical disability.&nbsp; Incumbent recognizes that accident prevention is equal to quality, production, delivery, and cost control and accepts the responsibility to work safety while promoting safety conscious among fellow employees.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Manufacturing Engineer - Continuous Improvement

ResponsibilitiesHowmet Aerospace is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit <a href="http://www.howmet.com/" target="_blank">www.howmet.com</a>. Follow @howmet: Twitter, Instagram, Facebook, LinkedIn and YouTube.This position will be in our Plant 10, Whitehall Casting Operation, and will plan, develop, and implement new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of labor and materials. Participate in plant safety inspections and housekeeping audits.&nbsp; This position will be responsible for deployment ABS and EHS improvements across the shifts, focusing on employee engagement.Job Roles&nbsp;<ul> <li>Systems thinking--thinks about the entire plant as a system; understands the importance of manufacturing in the context of the entire operation; works to eliminate silos between shifts and departments</li> <li>Measurement oriented--proactive to drive critical measures such as safety, quality, LU; prioritizes action based on net result</li> <li>Relationship builder--interacts up, down and across the organizational position structure; minimizes escalations through relationship and handles them where they exist; mentors and develops others</li> <li>Facilitator--knows the “how” and “what” of multiple areas of the enterprise; eliminates roadblocks for others; responds quickly to issues and ensures quality; translates policies and planning to supervisory group; able to act on limited information when necessary</li> <li>Advocate--ensures customer specifications are met; represents manufacturing interests with planning group; ensures supervisors have resources and resolution to issues; drives continuous improvement</li> <li>Tactician strategist--understands both the next best move and what needs to happen today; balances the immediate with the strategic; responds and plans; reacts and anticipates</li> <li>Organization and structure--plans daily; coordinates through others to deliver; ensures efficiencies while balancing priorities of multiple projects and stakeholder groups</li> <li>Autonomy--functions well with limited direction; comfortable making decisions and giving direction; accepts feedback and constructive criticism regarding actions taken</li></ul>Responsibilities<ul> <li>Supervises an effective team; includes planning and holding meetings to flow down information, preparing and conducting performance appraisals as appropriate, managing staffing levels (including vacations, overtime, and leaves of absences), assisting with career development (motivates, coaches, and trains to acquire maximum quality, productivity, morale, and cooperation), approving time and attendance, and prioritizing and making work assignments.</li> <li>Provides effective feedback to employees, both positive and negative.&nbsp; Maintains appropriate documentation for all disciplinary actions taken.</li> <li>Directs training and orientation of employees to ensure EHS rules are known and understood, to improve work performance and culture, and acquaint employees with company policies, practices,&nbsp;procedures and business initiatives.</li> <li>Maintains compliance with the collective bargaining agreement.&nbsp; Interfaces between management and union officials.&nbsp; Handles grievances.</li> <li>Reviews production and operating reports and resolves operations, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays.</li> <li>Investigates and analyzes.&nbsp; Initiates or recommends actions to correct deviations and variables affecting schedules, costs, quality, and other factors.</li> <li>Requisitions tools, equipment, and supplies required for operations and ensures employees have understanding of tools available (including the help chain).</li> <li>Confers with management, engineering, and quality control personnel to resolve maintenance problems and recommend measures to improve operations and conditions of machines and equipment.</li> <li>Reviews work procedures for safety regulations and concerns.</li> <li>Plans, develops, and implements new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of labor and materials.</li> <li>Participates in plant safety inspections and housekeeping audits.</li> <li>Complies with all EHS rules required for the work environment.</li> <li>Performs other duties, as assigned.</li></ul>QualificationsBasic Qualifications:<ul> <li>High school diploma or GED from an accredited institution.</li> <li>5+ years working in a manufacturing environment OR 1 year of Howmet supervisory/leadership experience.</li> <li>5+ years supervisory/managerial experience.</li> <li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li></ul>Preferred Qualifications<ul> <li>BS Degree in Engineering or Business</li> <li>Experience in the investment casting industry a plus</li> <li>Ability to effectively present information and respond to questions from customers, managers, and employees.</li> <li>Excellent leadership skills that create an engaged employee environment and have direct report responsibilities for supervisors.</li> <li>Able to drive improvement through the implementation of the lean manufacturing principles, total quality practices, six sigma and 6S.</li> <li>Technical understanding of manufacturing processes</li> <li>Good analytical, problem solving, communication, interpersonal, organizational and negotiation skills</li> <li>Good financial literacy</li></ul>About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

14 Industrial work / Manufacturing Jobs in Michigan