field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

USRC's greatest strength in being a leader in the dialysis industry is our ability to recognize and celebrate the differences in our diverse workforce. We strongly believe in recruiting top talent and creating a diverse and inclusive work climate and culture at all levels of our organization.&nbsp;The Biomedical Technician is responsible for overseeing the overall operational condition, maintenance and repair of all water treatment equipment, all medical equipment and mechanical/electrical systems to ensure patient safety and the safety of all staff operating such equipment for their assigned clinic(s).ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.&nbsp; Other duties and tasks may be assigned.&nbsp;<ul><li>Demonstrate effective use of supplies and staff labor hours.</li><li>Assist with purchasing as needed: place orders, perform weekly and month end inventory counts.</li><li>Be familiar with the overall procedures used in Inventory Control (FIFO) and assist in the documentation and control of excess inventory.</li><li>Perform duties as assigned to meet the patient care or operational needs of the clinic.</li><li>Troubleshoot, repair and maintain equipment as recommended by the manufacturer.</li><li>Repair, calibrate, test, clean and disinfect dialysis machines, water distribution loop and RO's according to protocol.</li><li>Perform water quality checks to include but not limited to: free chlorine, total chlorine, and water hardness testing.</li><li>Perform safety checks and tests on all pretreatment water equipment including but not limited to carbon tanks, water softeners, RO units, UV lamps and ultrafilters.</li><li>Collect samples of RO water and dialysate for microbiology testing according to protocol.</li><li>Collect water samples for AAMI analysis testing according to protocol.</li><li>Disinfection of central bicarbonate system and mixing tank according to protocol.</li><li>Disinfection of RO, distribution system, and hemodialysis machines according to protocol.</li><li>Perform duties at all times within limitations established by and in accordance with company policy and procedures, applicable state and federal laws and regulations.</li><li>Perform electrical safety on dialysis machines and related equipment.</li><li>Be familiar with instruction manuals and operation for equipment in accordance with manufacturer's recommendations. Be capable of starting up and shutting down facility's equipment if necessary.</li><li>Maintain established preventative maintenance programs and required support documentation.</li><li>Maintain accurate maintenance records for the facility's equipment.</li><li>Have knowledge of the function and safe operation of water treatment equipment and related mechanical and electrical systems.</li><li>Address physical environment issues which could impact patient and staff safety.</li><li>Mix bicarbonate solution according to protocol. Mix acid concentrate solution according to protocol.</li><li>Assist in receiving, storing and stocking of supplies.</li><li>Be familiar with all emergency equipment and emergency operational procedures.</li><li>Use appropriate safety measures including personal protective equipment as necessary.</li><li>Be familiar with OSHA regulations.</li><li>Update Material Safety Data Sheets (MSDS) as required.</li><li>Be aware of all contracts and contacts necessary for the emergency repair of the clinic's equipment and mechanical systems.</li><li>Obtain quotes from reputable and approved contractors as needed to address physical environment issues.</li><li>Present technical summaries in QAPI meetings.</li><li>Maintain collaborative working relationship with Administrator(s). Partner with Administrator(s) to ensure clinic needs are met.</li><li>Actively promote GUEST customer service standards; develop effective relationships at all levels of the organization.</li><li>Respond effectively to inquiries or concerns.</li><li>Participate in staff meetings as required. Attend in-service and continuing education offerings in compliance with company policy and procedure.</li><li>Complete initial and annual technical training on clinical staff as required.</li><li>Instruct staff in use and care of equipment and answer questions.</li><li>Participate in team concepts and promote a team effort.</li></ul>

U.S. Renal Care

Dialysis Biomedical Technician

Join the Clean Energy RevolutionBecome&nbsp;a&nbsp;Meter Technician 1A&nbsp;at Southern California Edison (SCE) and build a better tomorrow. In this job, you’ll repair, test, and calibrate all types and classes of single phase and non-IDR (interval data recording) Polyphase Meters in our Meter Acceptance Shop and in the field. You will also inspect internal/external connections and test for continuity and grounds.As a&nbsp;Meter Technician 1A, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?Responsibilities<ul><li>Inspects/validates mechanical, electrical, electronic, and communication components.</li><li>Cleans, reconditions, repairs, or replaces defective parts.</li><li>Verifies register ratios and meter constants.</li><li>Uses test instruments to perform testing and evaluation of associated metering equipment and load survey devices.</li><li>Tests insulation of meters and associated metering equipment, such as, but not limited to test switches, phasing transformers, and load survey devices at high potential.</li><li>Performs meter tests using various types of tests and computes meter error.</li><li>Adjusts as needed to bring accuracy within prescribed limits.</li><li>Checks, verifies, and updates meter nameplate data and meter programs.</li><li>Records test results in SCE systems.</li></ul> Minimum Qualifications<ul><li>Experience fixing mechanical, electrical, or electronic equipment.</li><li>Possess a current valid Driver’s License. </li></ul>Preferred Qualifications<ul><li>Experience and working knowledge with Electronics and/ or Electrical Theory.</li><li>Certificate or Degree in Electrical Engineering Mechanical Engineering, or education in a&nbsp;related technical field.</li><li>Experience as a commercial/residential electrician, or in electrical construction.</li><li>Experience working with power tools and hand tools (e.g., socket wrenches, screwdrivers, splicer, wire cutter, etc.)</li><li>Ability to bend and lift assets up to 50 lbs.</li><li>Experience and proficiency with Microsoft Office suite including Word, Excel, and Outlook.</li><li>Experience and proficiency performing advanced Microsoft Excel functions, including performing: VLOOKUP’s, Pivot Tables, Mathematical Computations, filtering/sorting, charts and graphing.</li><li>Experience and ability to perform mathematical computations and algebra calculations to check, verify, and update data.</li><li>Experience and ability tabulating test results and performing computations for statistical analysis from testing data.</li><li>Experience testing and repairing Single Phase and Polyphase Meters associated metering equipment and load survey devices.</li><li>Strong communication and interpersonal skills to interface customers.</li></ul>Additional Information<ul><li>This position’s work mode is&nbsp;on-site. The employee will report to an SCE facility or in the field location.&nbsp; Further details of this work mode will be discussed at the interview stage. The work mode can be changed based on business needs.</li><li>Visit our&nbsp;Candidate Resource&nbsp;page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!</li></ul><ul><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.</li><li>Relocation does not apply to this position.</li><li>This position requires testing and applicants who are identified to continue through the selection process will be invited to test via email. Reference our&nbsp;Information Guides&nbsp;for the following tests:&nbsp;Meter Technician 1 &amp; 1A (Test 2605), and EEI CAST (Test 5108).&nbsp; Candidates who have previously passed these assessment(s), in some cases, may not need to retest again for this position.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.Southern California Edison is a proud Equal Opportunity Employer, including disability and protected veteran status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

Southern California Edison

Meter Technician 1A

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

Dialysis Patient Care Technician

Company Profile SoCal JCB is a highly successful, fast-growing business We pride ourselves in customer service. We invest in our workforce and offer a highly competitive compensation and benefit program. SoCal JCB is an authorized dealer for JCB construction equipment including skid steer loaders, backhoe loaders, wheel loaders, excavators and telehandlers.Position SummaryReporting to the Service Manager. This position is responsible for&nbsp;repairing and maintaining various types of aerial and earth moving equipment.Major Tasks, Responsibilities &amp; Key Accountabilities<ul><li>Complete and turn in field reports that capture all time and work completed on site</li><li>Provide diagnostic analysis, repair, or preventative maintenance to customers</li><li>Complete on-site system audits and evaluations</li><li>Practice and adhere to all safety and training</li></ul>Qualifications<ul><li>Strong written and verbal communication skills</li><li>5+ years' installing and maintaining machines</li><li>Ability to travel</li><li>Ability to lift up to 75 pounds</li></ul>Physical Requirements:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.<ul><li>Ability to stand and walk, with frequent lifting, guiding and/or carrying of light-weight materials or equipment for up to 12 hours.&nbsp;</li><li>Ability to twist upper body frequently, bend at waist, kneel, crouch and negotiate uneven surfaces.</li><li>Able to lift up to 50lbs</li><li>Use hands, arms and legs fully; grasp, manipulate, and assemble small to large objects with the aid of forklifts or cranes as needed; see and hear well.&nbsp;</li><li>Must be able to hear with or without aid.</li><li>Good eye hand coordination.&nbsp;</li><li>Communicate by speech and hearing in person at a Basic English proficiency.</li></ul>JCB is an equal employment opportunities (EEO) employer in accordance with applicable federal, state and local laws. JCB complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities.JCB is not currently hiring individuals for this position who now or in the future require sponsorship for employment visa status; however, as a global company, JCB offers many job opportunities outside of the U.S. which can be found through our website at <a href="https://www.jcb.com/en-gb/about/careers" target="_blank">https://www.jcb.com/en-gb/about/careers</a>.JobFamilyCustomer ServicePayTypeHourly

SoCal JCB - Field Service Technician 

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!SPACE SYSTEMS&nbsp;Rocket Lab’s Space Systems team is responsible for every satellite and satellite component made by Rocket Lab: from complete satellites destined for missions to the Moon and Mars, to the individual components and subsystems that make up a satellite like solar panels, flight software, reaction wheels and star trackers, separation systems, radios, and more. Our Space Systems team is made up of engineers, technicians, and designers who design, create, and put together our own satellites for missions across the commercial, government, and defense sectors, or who build and assemble satellite hardware and software that supports other satellite missions.&nbsp;&nbsp;&nbsp;SPACECRAFT ASSEMBLY, INTEGRATION &amp; TEST TECHNICIAN II / SENIOR ASSEMBLY, INTEGRATION &amp; TEST TECHNICIAN&nbsp;Based onsite at Rocket Lab's global headquarters in Long Beach, CA the AIT Technician will be trained on and support Rocket Lab's Space Systems production. The AIT Technician needs to be able to transverse both R&amp;D and Manufacturing environments with ease and have high attention to detail in order to support rapid prototyping of satellites, spacecraft, and related satellite componentry.(Please note: this position can be hired at the Assembly Integration &amp; Test Technician II or Senior Assembly Integration &amp; Test Technician level)WHAT YOU’LL GET TO DO:<ul><li>Perform development and production of Space System componentry and Satellites with minimal documentation and oversight.</li><li>Utilizing detailed knowledge of electronic and mechanical fabrication methods to assemble or perform rework. Components include Fluid Systems, Propulsion Systems, Reaction Wheels, Star trackers, Deep Space Radios, Magnetorquers, Flight Computers and Solar Panel Arrays.</li><li>Perform tests on prototyping hardware with minimal direction from engineers.</li><li>Manufacture and integrate space standard harnesses.</li><li>Mechanically integrate space system components and associated hardware while adhering to all technical and environmental processes</li><li>Perform system level faultfinding activities on an integrated satellite. For example, continuity checks, functional checks, live voltage measurements, and leak tests.&nbsp;&nbsp;</li><li>Author new or revised assembly work procedures and documentation as required and ensure they are aligned with industry standards and practices.</li><li>Follow department policy for As-built accuracy, Non-conformance and quality process while in the manufacturing environment.</li></ul>YOU’LL BRING THESE QUALIFICATIONS AS AN AIT TECHNICAN II:&nbsp;<ul><li>5+ years of experience in the Aerospace industry.</li><li>High School diploma or GED.</li><li>Experience in the development and production of space systems or satellite componentry</li><li>Understanding of electromechanical assembly, tooling, test, and quality techniques.</li></ul>YOU’LL BRING THESE QUALIFICATIONS AS A SENIOR AIT TECHNICAN:&nbsp;<ul><li>8+ years of experience in the Aerospace industry.</li><li>High School diploma or GED.</li><li>Experience in the development and production of space systems or satellite componentry</li><li>Understanding of electromechanical assembly, tooling, test, and quality techniques.</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>Experience using electronic testing equipment including but not limited to oscilloscopes, power supplies, function generators, network analyzer and multimeters.</li><li>Familiar with ISO 9000 or AS9100 requirements</li><li>Experience with adhering to and developing industry standard environments (ESD safe zones and clean room)</li><li>Familiar with IPC/WHMA-A-620C and/or AC 43.13</li><li>Experience performing accurate measurements and quality inspections using calibrated tools such as calipers or micrometers.</li></ul>ADDITIONAL REQUIREMENTS&nbsp;<ul><li>Must be able to walk and stand for long periods of time&nbsp;</li><li>Must be comfortable working in a production environment with extensive use of hazardous chemicals such as acids, alkalis, and solvents&nbsp;</li><li>Must be able to lift up to 25lbs. unassisted.&nbsp;</li><li>Must be able to wear appropriate PPE for lab and electro-chemical manufacturing environment&nbsp;</li><li>Must be comfortable with climbing up and down ladders, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, carrying, crawling, and maneuvering in tight spaces&nbsp;</li><li>Must be willing to work extended hours and/or weekends as needed&nbsp;</li><li>Must be able to work a Monday-Thursday 5:00am-3:30pm shift&nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$30—$42 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Rocket Lab

Assembly Integration & Test Technician II/Senior

Imagine doing the best work of your career in a place where your efforts provide building repair and maintenance for the daily operation of assigned buildings including inspection, minor repairs, and preventive maintenance of building systems, furniture, fixtures, and equipment for our institution. We are proud that West Coast University has been certified as a Great Place to Work for the fourth year in a row! We are over 110 years in education and still growing. Come work and grow with us!You will make an impact by:<ul><li>Performing, supporting, and coordinating general operational services for common area maintenance and responding to requests for movement of materials, shipping and receiving, room setup and breakdown of classrooms and conference rooms, cleaning, spills, glass doors, etc.</li><li>Manages communications with leadership and serves as a trusted resource between finance and capital spend departments.</li><li>Receives packages and deliveries, aids with the shipping and handling of large items and boxes.</li><li>Replenishes lounge/breakroom supplies and maintains area cleanliness.</li><li>Performs daily/weekly/monthly building audits and makes relevant corrections.</li><li>Performs and/or coordinates preventative maintenance; cleans, adjusts, and repairs equipment and systems.</li><li>Participates in the coordination, monitoring, scheduling, and execution of facility-related activities, service/requests with contractors and special events.</li><li>Troubleshoots problems, repairs, tests, and adjustments, as needed.</li><li>Maintains tools and equipment required for maintenance/repair tasks and inventory of related materials.</li></ul>Your experience includes:<ul><li>2+ years of related experience and/or training, or equivalent combination of education and experience required.</li><li>Working knowledge of electrical, plumbing, heating and air conditioning repairs and maintenance.</li><li>Clean and valid driver’s license required.</li><li>Ability to type routine reports, correspondence, and emails.</li><li>Strong customer service orientation and interpersonal skills.</li><li>Knowledge of Microsoft Excel and Word.</li><li>Excellent time management skills and functions well under pressure of deadlines and conflicting priorities.</li><li>Self-starter capable of operating with little daily supervision and the ability to escalate issues when and where appropriate.</li><li>Flexible to meet the department's demands, including travel and after-hours work, with the ability to drive/travel locally to respond to afterhours/weekend emergencies as requested.</li><li>This is an onsite position where you will work at the campus (12215 Victory Boulevard, North Hollywood, CA) Monday-Friday.</li></ul>Education/Certifications:<ul><li>Associate degree or equivalent from a two-year college or technical school preferred.</li><li>Facilities related certifications preferred.</li></ul>Compensation:<ul><li>$25.95 - 35.04/hour</li><li>Great Benefits Package</li></ul>#LI-CM1Do you want a career that allows you to make a difference in other people’s lives? Discover what it means to truly believe in the work that you do at West Coast University.At West Coast University, we have the privilege of educating students seeking careers in healthcare and guide them through their transformational journey from student to caregiver. Our associates are united behind that purpose and share a deep commitment to our values of teamwork, collegiality, transparency, and a student-centric approach to all we do. This focus creates an aligned, nimble, and consensus-driven culture that is solution-oriented and supports our associates’ professional growth.West Coast University is proud to be an equal opportunity employer. We embrace diversity and are dedicated to creating an inclusive environment for all associates.

West Coast University

Building Technician I

ResponsibilitiesAbout Howmet AerospaceHowmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow:&nbsp;<a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>,&nbsp;<a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>,&nbsp;<a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>,&nbsp;<a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and&nbsp;<a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>.Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.Howmet Fastening Systems (HFS) is seeking a Machine Tech II&nbsp;in our&nbsp;Torrance, CA&nbsp;location. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California.&nbsp; We hold the number one global position in aerospace fastening systems, and we’re the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.Primary PurposeSets up, operates, and trouble shoots various secondary machines in all manufacturing departments.Major Activities<ul> <li>Proficiently sets up, operates, and trouble shoots machinery for self/others</li> <li>Sets up machines, according to work order set standard procedures and specialized company products and/or processes</li> <li>Learns the set up and operation of any new machines added to the departments to which assigned</li> <li>Assists factory supervision and lead person in the training of Machining Tech I and II</li> <li>Checks parts with standard gauges or precision measuring instruments and submits parts for inspection as required</li> <li>Operates machines to ensure proper functioning and releases to and instructs operator in procedures for producing parts in conformance with specifications</li> <li>Perform SPC Charting as required</li> <li>Keeps work area clean, safe, and in an orderly fashion on a daily basis</li> <li>Performs other tasks as required</li></ul>Essential Knowledge &amp; Skills<ul> <li>Certified in Lock Out/Tag Out&nbsp;</li> <li>Ability to read and interpret blueprints</li> <li>Must have good communication skills and know basic shop math&nbsp;</li> <li>Must be able to read, write and understand English</li> <li>Must be able to lift/move up to 30 lbs. (may not exceed per EHS Policies)</li></ul>QualificationsBasic Requirements:<ul> <li>High school diploma or general education degree (GED)&nbsp;preferred.</li> <li>Minimum 1 year experience in relevant machining experience.</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>Benefits/Salary:The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation.&nbsp;Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $19.00&nbsp;to $24.00.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutHowmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

55 Technician Jobs in Alhambra, CA, USA