field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description On the road 2-3 night out of the week. Position Purpose: Responsible for safely transporting hazardous and non-hazardous materials from the customer site to the appropriate designated sites using van trailers, straight trucks, flatbeds, tankers, roll-off frames, or other waste carrying equipment. Ensures that the condition of the material packaging meets the U.S. Department of Transportation (DOT) specifications, inspects manifests and shipping paperwork for accuracy, and maintains current transportation permits for all areas traveled. Abides by all regulations set forth by DOT, EPA, state and local governments, and VES-TS policies and procedures. Primary Duties/responsibilities: <ul><li>Perform daily inspections of vehicle and/or trailer prior to driving to ensure the safety and integrity of equipment going to designated sites.</li><li>Prior to transporting materials reviews shipment records, manifests, container labeling, vehicle placards, and integrity of loaded drums, roll-off boxes or bulk tankers.</li><li>Ensure that DOT requirements such as load weight limits, driver log books, Vehicle Inspection Records, transportation permits, insurance cards, fuel trip reports, IFTA fuel stickers, or other paperwork is up to date and valid.</li><li>Consults with customers pertaining to load conditions, drum counts or paperwork inconsistencies to ensure that materials can be properly transported to designated site(s).</li><li>Notify immediate supervisor of any moving violations and/or accidents in-route to and/or from sites.</li><li>Assist in the loading/unloading of materials at designated sites utilizing appropriate equipment.</li><li>Responsible for assisting with housekeeping as required.</li><li>Other duties as assigned</li></ul> Qualifications Education / Experience / Background: <ul><li>High School diploma or General Educational Development (GED) required</li><li>Prior commercial driving experience required</li></ul> Knowledge / Skills / Abilities: <ul><li>Familiarity with U.S. Department of Transportation (DOT) regulations pertaining to the transportation of hazardous and non-hazardous materials</li><li>Strong team player</li><li>Excellent interpersonal and communication skills</li><li>Time management: the ability to organize and manage multiple tasks</li><li>Strong customer service orientation</li></ul> Required Certification / Licenses / Training: <ul><li>Valid Class A Commercial Driving License (CDL) required</li><li>Hazmat (H) endorsement required</li><li>Tanker (T) endorsement required</li><li>40-Hour HAZWOPER training preferred</li></ul> Additional Information Targeted Hourly Pay Range: Minimum of $28 to a maximum of $30 Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave - 56 hours; Observed Holidays - 11 days; Vacation - 15 days Eligible for up to 4% annual performance bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Driver OTR

ResponsibilitiesHowmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. Howmet Dover Casting is a world-class supplier of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets. &nbsp;Howmet Aerospace is currently looking a&nbsp;Melter Tech&nbsp;to join our&nbsp;Howmet Alloy&nbsp;plant in Dover, New Jersey.&nbsp;The work hours for this&nbsp;Weekend Nights Shift are Friday Night to Sunday Night 6PM-630AM. Training on Days (M-F 6:00A - 2:30P) for several monthsAnticipated Pay Range: $24 - $26 per hour.&nbsp; *Pay rates within this range are determined based on various factors including experience, education, certifications, etc.Position will receive an hourly "shift premium" while assigned to an off-shift.Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. Some of our benefits include: Paid vacation each year, based on length of service; 13 paid holidays per year; 401(k) Retirement Savings Plan, company may match a percentage of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, Employee Assistance Program (EAP), Tuition Assistance Program; Free fitness center membership; Shift premium. &nbsp;The Melter Technician’s role is to Charge, operate, maintain, and clean melting and related equipment in accordance with Vacuum Alloy Manufacturing Process documented procedures and are responsible for daily operation of the vacuum furnaces.ENVIRONMENTAL HEALTH &amp; SAFETY RESPONSIBILITIES<ul> <li>Expected to assist in the implementation of Howmet Aerospace’s EHS value and policy statement and its accompanying principles;</li> <li>Comply with all department, facility, Corporate and Regulatory EH&amp;S regulations.</li> <li>Wear all required personal protective equipment;</li> <li>Report all job-related illness and injuries. (Per employee handbook);</li> <li>Report all Safety, Health &amp; Environmental concerns to your supervisor in a timely manner;</li> <li>Attend all EH&amp;S training.</li></ul>JOB RESPONSIBILITIES<ul> <li>Melting unit operation (pumps blower’s etc.);</li> <li>Monitor operation of equipment and perform adjustments as needed to insure equipment effectiveness;</li> <li>Furnish Lab prelim requirements;</li> <li>Document and maintain accurate records and logs;</li> <li>Maintain a clean and orderly work environment;</li> <li>Perform minor and preventative maintenance on equipment;</li> <li>Install, remove, and monitor operation of preheat torches;</li> <li>Follow all Melting techniques (Al’s, Melt Practices);</li> <li>Perform metal weighing of additions (if qualified) and verify prelim additions are correct;</li> <li>Some data entry of melt card/log required;</li> <li>May be required to assist on multiple furnaces during a workday;</li> <li>Perform coil changes which will include confined space, LTV and operating the overhead crane to remove and install coils;</li> <li>Perform emergency and remedial procedures which may arise during the melting process;</li> <li>Spout and entry changes;</li> <li>Run the tube cleaner and keep area clean;</li> <li>Hot top molds and clean molds as required;</li> <li>Any other duties as assigned by Team Leader/Supervision;</li> <li>Assist in the training of new team members as needed;</li> <li>After training must be capable of running the “A”, “B”, “C” and W units.</li> <li>Must successfully complete Melter’s training and certification within prescribed timeframe.</li></ul>MELTER RESPONSIBILITIES DURING FURNACE CHANGES<ul> <li>Coordinate shift and shift-to-shift communication activities during furnace changes, with melt team and maintenance;</li> <li>Record the progression of furnace changes on furnace change sheet and report any problems encountered to shift team leader;</li> <li>Pass on status of furnace change to the next shift melt team members and supervision;</li> <li>Complete furnace change safety audits:</li></ul>1.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Confined Space2.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Fall Protection3.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Lockout/Tag Out/Verify4.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Respirator Inspections<ul> <li>Be accountable for the timely completion of furnace changes;</li> <li>Have all furnace changes supplies in assigned furnace change cabinet immediately following a furnace change;</li> <li>Order any supplies that are not in stockroom (breathable air, out of stock items).</li></ul>JOB SPECIFICATIONSOther Skills/Abilities<ul> <li>Must successfully complete Melter’s training and certification within prescribed timeframe.</li> <li>Ability to communicate effectively (verbal and written) and can read, write, and comprehend English.</li></ul>PHYSICAL DEMANDS/EQUIPMENT USED<ul> <li>This position requires a satisfactory vision exam, passing Jaeger J1 at not less than 12 inches (30.5 cm) in at least one eye, natural or corrected;</li> <li>Must pass all physical requirements which includes use of a respirator, mobile equipment including overhead cranes;</li> <li>Frequent sitting and standing in a hot manufacturing environment</li> <li>Occasional lifting up to 25 pounds</li> <li>Use of various large and small tools, forklift/handcart, saws, cranes and measurement equipment;</li> <li>Personal protective equipment including, but not limited to safety glasses, safety shoes, hardhat, hearing protection and clothing;</li></ul>MENTAL REQUIREMENTS<ul> <li>Be able to understand complex written instructions;</li> <li>Must be able to perform basic mathematic calculations;</li> <li>Must be able to perform basic operation of a PC;</li></ul>DisclaimerThe above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.QualificationsBASIC QUALIFICATIONS<ul> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.&nbsp;</li> <li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items</li> <li>High School diploma or GED from an accredited institution;</li> <li>No relocation benefit is offered for this position.&nbsp; Candidates residing within a 50 miles radius of Dover NJ will only be considered.</li></ul>PREFERRED QUALIFICATIONS<ul> <li>Able to work flexible hours including night and weekends with little advanced notice;</li> <li>Have ability to troubleshoot equipment.</li></ul>About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Howmet Aerospace

Production Worker (Melter Technician - Weekend Nights Shift)

ResponsibilitiesHowmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. Howmet Dover Casting is a world-class supplier of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets.Howmet Aerospace is currently looking a&nbsp;Maintenance Repair A&nbsp;to join our&nbsp;Howmet Casting&nbsp;plant in Dover, New Jersey. The work hours for this Weekend Nights Shift could be (Monday, Saturday, Sunday 6:00P - 6:30A). Training will occur on Day Shift during the week Monday - Friday 6:30A - 3:00PNew Hire Starting Hourly Rate:&nbsp;$33.57; After 12 Months:&nbsp;$36.15.$2500 Sign on Bonus payable after 90 days of employment&nbsp;(Sign on Bonus for external candidates&nbsp;only)Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. Some of our benefits include: Paid vacation each year, based on length of service; 13 paid holidays per year; 401(k) Retirement Savings Plan, company may match a percentage of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, Employee Assistance Program (EAP), Tuition Assistance Program; Free fitness center membership.Position Overview&nbsp; Makes repairs and does preventative maintenance on facility and manufacturing equipment.Essential Job Functions &nbsp; •&nbsp;&nbsp; &nbsp;Assists Senior Maintenance in maintaining plant mechanical and building equipment. •&nbsp;&nbsp; &nbsp;Installs piping and mechanical equipment as directed. •&nbsp;&nbsp; &nbsp;Able to trouble shoot and repair all routine mechanical failures or malfunctions and acquire some knowledge of hydraulic and pneumatic systems. •&nbsp;&nbsp; &nbsp;Assists in construction and/or repair of all plant equipment. •&nbsp;&nbsp; &nbsp;Keeps records as required. •&nbsp;&nbsp; &nbsp;Must be able to perform the duties of a B Maintenance Mechanic •&nbsp;&nbsp; &nbsp;Performs other duties as assigned by supervision. •&nbsp;&nbsp; &nbsp;Maintain all assigned work areas in as clean, orderly and safe condition as circumstances permit.EHS Requirements •&nbsp;&nbsp; &nbsp;Expected to assist in the implementation of EHS Values and policy statements and accompanying principals. •&nbsp;&nbsp; &nbsp;Comply with all department, facility, corporate and regulatory EHS regulations. •&nbsp;&nbsp; &nbsp;Wear all required personal protective equipment (PPE). •&nbsp;&nbsp; &nbsp;Report all job-related illness and injuries (Per Employee Handbook). •&nbsp;&nbsp; &nbsp;Report all safety, health and environmental concerns to your supervisor in a timely manner. •&nbsp;&nbsp; &nbsp;Attend all EHS training. &nbsp;QualificationsBASIC QUALIFICATIONS<ul> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li> <li>No relocation benefit is offered for this position. Candidates residing within 50 miles radius of Dover, NJ will only be considered.</li> <li>High School Diploma or GED from an accredited institution.</li> <li>Requires 4 years of work experience in a Manufacturing Environment in a mechanical role&nbsp;or related experience.</li></ul>PREFERRED QUALIFICATIONS<ul> <li>Ability to communicate effectively (verbal and written)</li> <li>Must be able to work flexible hours including night and weekends with little advanced notice.</li> <li>Working towards acquiring a boiler operation license. Will be required to have a boiler license after 1 year of employment</li></ul>Other Skills/Abilities<ul> <li>Familiar in repairs and location of plant air compressors, natural gas and propane systems, sprinkler valves, etc., water systems (city, well and tower boilers)</li></ul>Physical Demands<ul> <li>Frequent lifting, pushing pulling and standing in a manufacturing environment</li> <li>Requires the use of a face shield and respirator at times</li> <li>TOOLS - Lathe, Welder, Miller, Grinders, Small hand tools and safety equipment, Computers, Vacuum leak detector</li></ul>DisclaimerThe above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Maintenance Mechanic A - Weekend Nights (S,Su,M) Casting

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Position Purpose: The Supervisor, System Maintenance and Planning (After Hours) will lead the after-hours activities of the construction and distribution departments as well as the Central Service Bureau (CSB) . This will include management of operation, maintenance and repair of distribution systems facilities, and related investigative activities on a planned and emergency basis. The Supervisor will approve deployment of personnel as required to execute planned work and maintain continuity of service for customers on an emergency basis. The Supervisor will coordinate any changes in planned activities for the next business day and ensure a seamless transition of oversight is achieved with the business hours team. The Supervisor will ensure all clerical, workforce management and emergency functions are carried out in accordance with acceptable procedures. The Supervisor will provide direction and communication to CSB staff as required to ensure that customer inquiries are handled in a timely, efficient and professional manner. The base working hours for this position will be 10:30 PM (Sunday) - 7:00 AM (Friday). Primary Duties/Responsibilities: <ul><li> Departmental Coordination and Supervision <ul><li>Coordinate after hours planned and emergency activities of system maintenance departments: Construction, Distribution, and CSB.</li><li>Supervise operations, including the installation, maintenance, repair, and improvement of system facilities (ex. mains, services, hydrants, valves).</li><li>Manage investigative work related to customer inquiries.</li><li>Ensure operational transition of Departmental oversight to and from the business hours team is seamless.</li><li>Coordinate schedule changes for the next business day that may be required as a result of after hour activities and staffing changes.</li><li>Confirm administrative completeness for all activities planned for the next business day and coordinate as required with the business hours team.</li></ul></li><li> Field Visits and Safety <ul><li>Conduct regular construction and distribution work site field visits to ensure teams are adequately resourced to meet customer needs in a safe and efficient manner.</li><li>Initiate action to eliminate safety hazards to employees, customers, and the public.</li><li>Ensure compliance with company policies, industry standards and regulatory requirements such as water quality regulations and safety regulations.</li><li>Prepare field reports documenting progress and identifying opportunities for improvement in prioritization, planning, scheduling, execution, and communication.</li></ul></li><li> Planning and Procedures <ul><li>Ensure execution of after-hours work plans developed with the System Maintenance team for the Construction and Distribution Departments.</li><li>Prioritize, plan, schedule and oversee emergent work as required to maintain continuity of service for customers.</li><li>Staffing and Training Program Support.</li><li>Review staffing plans for activities planned the next business day and coordinate as required with the business hours team.</li><li>Review work and safety training progress for the Departments and advise on projections to ensure the annual requirements and targets are met.</li></ul></li><li> Customer and Stakeholder Relations <ul><li>Working with the Communications and External Affairs teams, coordinate after hours company activities with external agencies and stakeholders as required to resolve mutual concerns.</li><li>Make on-the-spot decisions regarding customer disputes or complaints to maintain good community relations.</li></ul></li></ul> Work Environment: <ul><li>This position will be approximately 50% in the office and 50% in the field in a roadside construction environment.</li><li>The base working hours for this position will be 10:30 PM (Sunday) - 7:00 AM (Friday).</li></ul> Qualifications Education/Experience/Background: <ul><li>High School Diploma/GED is required.</li><li>Experience in water distribution, construction is preferred.</li><li>Minimum of 2 years supervisory experience in underground utility installation and repair or management and operation of public water supply distribution systems.</li></ul> Knowledge/Skills/Abilities: <ul><li>Ability to cope with emergency situations on a 24/7 basis in a dynamic and fast paced customer service-oriented business.</li><li>Ability to foster positive labor relations in a union shop environment.</li><li>Ability to read and interpret engineering drawings of distribution networks a plus.</li><li>Understanding of hydraulic principles related to piping networks a plus.</li></ul> Required Certification/Licenses/Training: <ul><li>Ability to pursue a NJ DEP W-1 operator's license within 1 year is preferred.</li></ul> Additional Information Pay Range $115000 to $120000 per year. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave - 56 hours; Observed Holidays - 11 days; Vacation - Flexible Time Off Eligible for up to 10% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

System Maintenance and Planning Supervisor (After-Hours)

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Position Purpose: The incumbent will oversee field operations for T&amp;D (Transmission and Distribution). The duties will include but not be limited to supervising and inspecting maintenance, repair and installation work performed by contractor and Veolia crews. Maintaining a safe environment for all employees and customers. Primary Duties/Responsibilities: <ul><li>Coordinate and schedule a variety of maintenance, installation, and repair projects.</li><li>Allocate and assign work crews to specific jobs based on job requirements and manpower availability.</li><li>Supervise and inspect maintenance, repair, and installation work to be completed in the assigned service area.</li><li>Follow the MUTCD for safe traffic designs for road closers.</li><li>Perform documented safety inspections of system maintenance crews and inspectors during course of daily field inspections.</li><li>Oversee the billing and field operations of mark-out contractor.</li><li>Update work force management software of field ready work, prior to assigning the activity.</li><li>Respond to complaints or problems received from customers (residential, commercial, and municipal) by conducting physical site inspections.</li><li>Check periodically on work in progress of private contractors to verify the quality of work as well as the statements they submit as to the amount of material and labor used.</li><li>Investigate site for planned projects to determine necessary safety precautions, special tools, and equipment, in addition to other special project requirements.</li><li>Participate in developing and implementing the department's operational scheduling and standard operating procedures.</li><li>Monitor, maintain and develop KPIs.</li><li>Must be able to respond to emergency calls and work extended hours as needed (the incumbent must be a member of the emergency callout rotation team) with a 45-minute response time.</li><li>Commitment to health, safety, and protection of the environment:</li><li>The incumbent supports Veolia's commitment to safety by complying with the programs regarding health, safety, and protection of the environment. The incumbent demonstrates safe work practices, takes part in safety meetings, and advises the superintendent of any non-conforming conditions.</li><li>The incumbent must be in possession of a valid driver's license.</li><li>All supervisory staff are expected to monitor emails and texts for emergency situations which may arise, and communicate with the Manager, Corporate Communications, BPU, DEP, Operations, and other T&amp;D management staff.</li><li>Complies with all organization safety procedures.</li><li>Sets the tone for safety and housekeeping.</li><li>Lead by example.</li><li>Accountable for personnel issues.</li><li>Performance.</li><li>Corrective Action.</li><li>Development.</li><li>Perform other projects / tasks/ duties as assigned.</li></ul> Qualifications Education/Experience/Background: <ul><li>A Bachelor's degree in management, engineering, or science is preferred.</li><li>3-5 years of supervisory experience.</li></ul> Knowledge/Skills/Abilities: <ul><li>Must be able to read complex reports and engineering drawings. Write detailed reports and prepare presentations. Analyze complex operational and engineering challenges and resolve same. Learn new technological advances in distribution technique and equipment.</li><li>Ability to learn how a water distribution network operates.</li><li>Have strong managerial and interpersonal skills.</li><li>Adequate computer skills and the ability to work within an office environment.</li><li>Able to utilize Microsoft Office and Google.</li><li>Able to learn how to utilize a workforce management software.</li><li>Effective supervisory techniques.</li><li>Strong knowledge in methods, practices, procedures, materials, and equipment associated with the construction, maintenance, and repair of water distribution systems.</li><li>Ability to effectively supervise skilled and unskilled employees.</li><li>Ability to accurately read and interpret engineering plans and drawings.</li><li>Ability to work harmoniously and tactfully with other departments and the public.</li><li>Ability to keep accurate records and submit accurate reports.</li><li>Ability to determine work priorities and schedule, organize, assign, and coordinate the work of crews and individuals and communicate this to the Planning department.</li><li>Assist in employee selection, training, supervision, and evaluation.</li><li>Ability to communicate effectively both orally and in writing.</li><li>Ability to handle multiple deadlines and multiple projects.</li><li>Ability to inspect work in progress and upon completion.</li><li>Record keeping and report writing techniques.<ul><li>Understand and perform safety practices and procedures.</li><li>Applicable health and safety regulations as they relate to area assigned.</li></ul></li><li>Must be able to respond to emergency calls and work extended hours as needed.</li><li>Able to understand basic math and hydraulics.</li></ul> Required Certification/Licenses/Training: <ul><li>Must have or be able to obtain a NJDEP Water Distribution Class Licenses.</li><li>NJDEP W-1 Distribution License is preferred.</li><li>Ability to attain CDL.</li></ul> Physical Requirements: <ul><li>Walking on uneven terrain; climbing hills and stairs; moderate lifting up to 25 pounds; sit for long periods at a time.</li><li>Must be able to see clearly, hear through listening devices such as an aqua phone for leaks and hear warning devices and alarms.</li><li>Must be able to speak to give direction and converse with other officials.</li><li>Must be able to smell for dangerous conditions such as sewer gases and chlorine.</li></ul> Additional Information Pay Range $100000 to $105000 per year. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave - 56 hours; Observed Holidays - 11 days; Vacation - Flexible Time Off Eligible for up to 10% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Systems Maintenance Supervisor

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Position Purpose: Under the direction of the Senior Manager-Production Support, NJ Operations, The Supervisor-General Maintenance is responsible for overseeing all maintenance activities for buildings and grounds in the Veolia New Jersey service territory. Primary Duties/Responsibilities: <ul><li> Overall Objective : To ensure the proper maintenance and operational readiness of all Veolia facilities, vehicles, and equipment, and to provide resource support to other departments as necessary.</li><li> Work Assignment Delegation : To assign and manage tasks to maintenance personnel, ensuring the availability of required resources and materials for successful task completion.</li><li> Safety Compliance : To maintain comprehensive knowledge of and adherence to all applicable safety regulations and protocols relevant to industrial site operations.</li><li> Operational Contingency Planning : To effectively address operational disruptions, including inclement weather events, equipment failures, and personnel absences, through strategic resource reallocation and task prioritization.</li><li> Contractor Oversight : To supervise and evaluate the performance of external contractors, ensuring compliance with contractual obligations and quality standards.</li><li> Comprehensive Maintenance Oversight : To manage and oversee the maintenance and repair of diverse systems and infrastructure, including water systems and building facilities.</li><li> Treatment Program Management : To administer and direct the maintenance of filtration and PFAS treatment systems.</li><li> Snow Removal Coordination : To organize and execute snow removal operations and provide support to the Watershed Department during winter conditions.</li><li> HVAC System Administration : To oversee and manage the maintenance of HVAC systems across all company locations.</li><li> Emergency Response Capability : To be available and responsive to emergency situations at all times, including after-hours incidents.</li><li> Reservoir Support Services : To provide assistance and support for reservoir treatment operations.</li><li> Interagency Liaison : To serve as a liaison between the company and external agencies, as well as other internal departments.</li><li> Environmental Sustainability Support : To actively support recycling and environmental sustainability initiatives.</li><li> Contractor Management : To manage relationships with major contractors, conduct site inspections, and coordinate equipment rentals as needed.</li><li> Equipment Provision : To provide equipment, including vehicles and pumps, to other departments as required.</li><li> Engineering Support : To assist the Engineering Department with land surveying and related activities.</li><li> Staffing Augmentation : To provide additional staffing support to other departments during peak periods or as necessary.</li><li> Employee Training and Development : To deliver training to maintenance staff on job procedures and safety protocols.</li><li> Regulatory Compliance : To ensure adherence to the backflow and cross-connection control program requirements.</li><li> On-Call Availability : To be readily available for on-call duty to address maintenance issues promptly.</li><li> Emergency Response Team Participation : To serve as a member of the Veolia NJ Emergency Response Team.</li><li> Spill Response Management : To manage and coordinate the response to oil and waste spills.</li></ul> Qualifications Education/Experience/Background: <ul><li>High School Diploma/GED is required.</li><li>Relevant trade experience and training.</li><li>Water Treatment experience is desirable.</li><li>Experience using a CMMS (preferably HxGN EAM) is desirable.</li><li>Minimum of 10 years related work experience in general facilities, equipment, and grounds maintenance.</li></ul> Knowledge/Skills/Abilities: <ul><li>Must be able to efficiently manage several crews simultaneously performing different tasks.</li><li>Must be experienced in all aspects of building maintenance including plumbing, carpentry, welding, roofing, masonry, and painting.</li><li>Must be experienced in land maintenance including tree work, excavation, brush clearing, road maintenance, and fence repairs.</li><li>Must be able to operate or understand heavy equipment such as a backhoe, bulldozer, skid-steer, work barge, and boats.</li><li>Must be competent in Google Office Suite.</li><li>Must be able to prepare budgets and maintain KPI reports for a team.</li><li>The successful candidate must be able to operate or ride on a boat.</li></ul> Required Certification/Licenses/Training: <ul><li>Applicants must be able to obtain an NJDEP T-1 Water treatment license within 1 year of hire.</li><li>Applicants must be able to obtain an NJDEP Pesticide Applicators license within 1 year of hire.</li></ul> Physical Requirements: <ul><li>The successful candidate must be able to lift 50 lbs.</li><li>Sitting at a desk or conference table for long periods of time is required.</li><li>The successful candidate must be able to traverse rugged undeveloped terrain.</li></ul> Additional Information Pay Range: $95000 to $105000 per year. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave - 56 hours; Observed Holidays - 11 days; Vacation - Flexible Time Off Eligible for up to 10% Annual Performance Bonus. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Supervisor of General Maintenance

ResponsibilitiesHowmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. Howmet Dover Casting is a world-class supplier of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets.Howmet Aerospace is currently looking a&nbsp;Maintenance Repair A&nbsp;to join our&nbsp;Howmet Casting&nbsp;plant in Dover, New Jersey. The work hours for this Weekend Day Shift could be (Friday, Saturday, Sunday 6:00A - 6:30P). Training will occur on Day Shift during the week Monday - Friday 6:30A - 3:00PNew Hire Starting Hourly Rate:&nbsp;$34.75; After 12 Months:&nbsp;$37.42$2500 Sign on Bonus payable after 90 days of employment&nbsp;(Sign on Bonus for external candidates&nbsp;only)Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. Some of our benefits include: Paid vacation each year, based on length of service; 13 paid holidays per year; 401(k) Retirement Savings Plan, company may match a percentage of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, Employee Assistance Program (EAP), Tuition Assistance Program; Free fitness center membership.Position Overview&nbsp; Makes repairs and does preventative maintenance on facility and manufacturing equipment.Essential Job Functions &nbsp; •&nbsp;&nbsp; &nbsp;Assists Senior Maintenance in maintaining plant mechanical and building equipment. •&nbsp;&nbsp; &nbsp;Installs piping and mechanical equipment as directed. •&nbsp;&nbsp; &nbsp;Able to trouble shoot and repair all routine mechanical failures or malfunctions and acquire some knowledge of hydraulic and pneumatic systems. •&nbsp;&nbsp; &nbsp;Assists in construction and/or repair of all plant equipment. •&nbsp;&nbsp; &nbsp;Keeps records as required. •&nbsp;&nbsp; &nbsp;Must be able to perform the duties of a B Maintenance Mechanic •&nbsp;&nbsp; &nbsp;Performs other duties as assigned by supervision. •&nbsp;&nbsp; &nbsp;Maintain all assigned work areas in as clean, orderly and safe condition as circumstances permit.EHS Requirements •&nbsp;&nbsp; &nbsp;Expected to assist in the implementation of EHS Values and policy statements and accompanying principals. •&nbsp;&nbsp; &nbsp;Comply with all department, facility, corporate and regulatory EHS regulations. •&nbsp;&nbsp; &nbsp;Wear all required personal protective equipment (PPE). •&nbsp;&nbsp; &nbsp;Report all job-related illness and injuries (Per Employee Handbook). •&nbsp;&nbsp; &nbsp;Report all safety, health and environmental concerns to your supervisor in a timely manner. •&nbsp;&nbsp; &nbsp;Attend all EHS training. &nbsp;QualificationsBASIC QUALIFICATIONS<ul> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li> <li>No relocation benefit is offered for this position. Candidates residing within 50 miles radius of Dover, NJ will only be considered.</li> <li>High School Diploma or GED from an accredited institution.</li> <li>Requires 4 years of work experience in a Manufacturing Environment in a mechanical role&nbsp;or related experience.</li></ul>PREFERRED QUALIFICATIONS<ul> <li>Ability to communicate effectively (verbal and written)</li> <li>Must be able to work flexible hours including night and weekends with little advanced notice.</li> <li>Working towards acquiring a boiler operation license. Will be required to have a boiler license after 1 year of employment</li></ul>Other Skills/Abilities<ul> <li>Familiar in repairs and location of plant air compressors, natural gas and propane systems, sprinkler valves, etc., water systems (city, well and tower boilers)</li></ul>Physical Demands<ul> <li>Frequent lifting, pushing pulling and standing in a manufacturing environment</li> <li>Requires the use of a face shield and respirator at times</li> <li>TOOLS - Lathe, Welder, Miller, Grinders, Small hand tools and safety equipment, Computers, Vacuum leak detector</li></ul>DisclaimerThe above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Maintenance Mechanic A - Weekend Nights (Casting)

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.CompensationThe base hourly rate for this position is $39.44.Johns Manville in Edison, NJ is recruiting for an Industrial Maintenance Mechanic/Millwright Under the direct supervision of the Plant Engineer, responsible for performing all duties in a safe, quality driven, efficient, and professional manner. Working from general instructions from the plant management team, and all levels within the organization in support of the four Johns Manville core values: People, Passion, Performance, and Protection.$39.44: Shift: 6am - 2:30pm Your Day to Day: <ul><li>Supervise/manage small projects as assigned. Work independently.</li><li>Operate various machine shop equipment such as lathes, drill presses, grinders and related equipment to make repairs.</li><li>Maintains, adjusts, services and lubricates plant equipment such as production machines, mobile equipment, pumps, valves and other process related equipment. Inspects and determines required repairs.</li><li>Maintains and makes repairs to plant buildings, facilities, utilities and area systems involving plumbing, carpentry, masonry, pipe fitting and other related crafts.</li><li>Diagnose, repair and install power transmission components - Gear boxes, couplings, chains, belts, sprockets and other related components.</li><li>Performs welding and gas cutting as required.</li><li>Diagnose, repair and install pneumatic and hydraulics systems - cylinders, hoses, pumps and valves.</li><li>Reports time and documents work orders appropriately to SAP. 9. Utilizes inventory system and assures all parts are removed and returned to inventory as required.</li><li>Assists in production line changeover and setup and ability to lead if needed.</li><li>Maintain maintenance, TPM, deviation/inspection and other required electronic and written logs as instructed</li><li>Operate overhead crane and lift devices safely &amp; efficiently</li><li>Direct multi-crafts daily in task &amp; job assignment</li><li>Lead MRO Cycle counting Process</li><li>Installation of new equipment as necessary</li><li>Observe specific parts of equipment and materials in process to determine or analyze the cause of machine malfunctions.</li><li>Repair and/or make any necessary adjustments to equipment to obtain desired operating results</li><li>Work with engineers, part/mold designers, and other management personnel to set up, operate, and debug assigned equipment</li><li>Provide ownership and input of extrusion and thermoforming processes and equipment for the reduction of downtime.</li><li>Start-up, Shutdown, &amp; Set-up of 3 of 3 of the following areas (Inline, Comets, Extrusion)</li><li>Initiate/update Preventive Maintenance (PM’s), Standard Operating Procedures (SOP’s), Pre-Task Plans (PTP’s), Safety</li><li>Audits etc., to provide efficient operation of Maintenance Department.</li></ul>What You Bring to the Team:<ul><li>Minimum of High School Diploma with technical college certification or Associates degree in technical discipline with 7 or more years of industrial experience in mechanical/electrical repairs -- or- 10 years of strong industrial experience in mechanical/electrical repairs in lieu of a formal education</li><li>Experience operating various machine shop equipment such as lathes, drill presses, grinders and related equipment to make repairs</li><li>Welding, gas cutting, and fabrication experience</li><li>Experience diagnosing, repairing, and installing power transmission components - Gear boxes, couplings, chains, belts, sprockets and other related components</li><li>Intermediate experience with Microsoft Office Suite</li><li>Flexible in work and assignments</li></ul>PHYSICAL DEMANDS: Note: The physical demands described below are representative of those that must be met by and employee to successfully perform the essential functions of this job.<ul><li>Must be able to stand for long periods of time on cement floors</li><li>Must be able to walk, stoop, kneel, bend and climb ladders and staircases</li><li>Must be able to lift up to 50 lbs. as required</li></ul>Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Johns Manville

Industrial Maintenance Mechanic/Millwright

Maintenance Mechanic A - Weekend Days (FSSu) (Casting)

Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. Howmet Dover Casting is a world-class supplier of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets. Howmet Aerospace is currently looking a&nbsp;Maintenance Repair A&nbsp;to join our&nbsp;Howmet Alloy plant in Dover, New Jersey. The work hours for this Afternoon Shift are Monday - Friday 2:00p - 10:30p. Training will occur on Day Shift Monday - Friday 6:00A - 2:30P New Hire Starting Hourly Rate:&nbsp;$34.75; After 12 Months:&nbsp;$37.42 Position will receive an hourly "shift premium" while assigned to an off-shift. $2500 Sign on Bonus payable after 90 days of employment&nbsp;(Sign on Bonus for external candidates&nbsp;only) Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. Some of our benefits include: Paid vacation each year, based on length of service; 13 paid holidays per year; 401(k) Retirement Savings Plan, company may match a percentage of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, Employee Assistance Program (EAP), Tuition Assistance Program; Free fitness center membership. Position Overview&nbsp; Makes repairs and does preventative maintenance on facility and manufacturing equipment. Essential Job Functions • &nbsp;Assists Senior Maintenance in maintaining plant mechanical and building equipment. • &nbsp;Installs piping and mechanical equipment as directed. • &nbsp;Able to trouble shoot and repair all routine mechanical failures or malfunctions and acquire some knowledge of hydraulic and pneumatic systems. • &nbsp;Assists in construction and/or repair of all plant equipment. • &nbsp;Keeps records as required. • &nbsp;Must be able to perform the duties of a B Maintenance Mechanic • &nbsp;Performs other duties as assigned by supervision. • &nbsp;Maintain all assigned work areas in as clean, orderly and safe condition as circumstances permit. EHS Requirements • &nbsp;Expected to assist in the implementation of EHS Values and policy statements and accompanying principals. • &nbsp;Comply with all department, facility, corporate and regulatory EHS regulations. • &nbsp;Wear all required personal protective equipment (PPE). • &nbsp;Report all job-related illness and injuries (Per Employee Handbook). • &nbsp;Report all safety, health and environmental concerns to your supervisor in a timely manner. • &nbsp;Attend all EHS training. BASIC QUALIFICATIONS <ul><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li><li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>No relocation benefit is offered for this position. Candidates residing within 50 miles radius of Dover, NJ will only be considered.</li><li>High School Diploma or GED from an accredited institution.</li><li>Requires 4 years of work experience in a Manufacturing Environment in a mechanical role&nbsp;or related experience.</li></ul> PREFERRED QUALIFICATIONS <ul><li>Ability to communicate effectively (verbal and written)</li><li>Must be able to work flexible hours including night and weekends with little advanced notice.</li><li>Working towards acquiring a boiler operation license. Will be required to have a boiler license after 1 year of employment</li></ul> Other Skills/Abilities <ul><li>Familiar in repairs and location of plant air compressors, natural gas and propane systems, sprinkler valves, etc., water systems (city, well and tower boilers)</li></ul> Physical Demands <ul><li>Frequent lifting, pushing pulling and standing in a manufacturing environment</li><li>Requires the use of a face shield and respirator at times</li><li>TOOLS - Lathe, Welder, Miller, Grinders, Small hand tools and safety equipment, Computers, Vacuum leak detector</li></ul> Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

23 Technician Jobs in New Jersey