field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

As an HVAC technician II, you will perform basic maintenance, including filter and fan motor replacement, and troubleshoot drains, fan and blower motors, heaters, contactors, reversing valves, compressors, and TXVs. Repairs and replacements (e.g., refrigerant piping, drain piping, wiring, and charging) will occur on commercial 1–40-ton, 5–40-ton and residential 1–5-ton systems. Responsibilities include adhering to schedules and timelines, coordinating with assigned staff to accomplish tasks, and advising your supervisor when emergencies arise and assistance from other trades is required. You will read and interpret blueprints, complete work order requests, and document issues that need correction in the work order system. Additionally, you will follow all OSHA and SCAD policies, procedures, and safety practices.The ideal candidate is knowledgeable about the principles of air distribution and the refrigeration cycle. They possess a clear understanding of both high and low voltage components and their functions, along with electrical components and control systems such as Siemens, Carrier i-Vu, and Trane Tracer. The candidate works well independently with minimal direction, consistently maintains a professional appearance, and is available on call to address emergency situations.&nbsp;Minimum qualifications:     &nbsp;<ul><li>High school diploma or GED and technical school degree in an appropriate area</li><li>At least four years of electrical experience in construction or maintenance</li><li>Knowledge of control systems</li></ul>Preferred qualifications:     &nbsp;&nbsp;<ul><li>Knowledge of commercial refrigeration and ice machines</li></ul>Certificates, licenses, and registrations: &nbsp;<ul><li>Valid driver’s license</li><li>Valid refrigerant card to comply with the Clean Air Act (CAA)</li><li>Acceptance as SCAD-authorized driver</li><li>Able to pass DOT medical exam*</li></ul>* If an applicant fails the DOT physical due to a claimed disability under the ADA and informs the university, the university will engage in the interactive process with the applicant to assess whether a reasonable accommodation exists that would allow the applicant to perform the essential functions of the position.Travel required:&nbsp;&nbsp;<ul><li>10–20%  &nbsp;</li></ul>Work hours: The university work week is Sunday through Saturday. Most offices are open Monday through Friday 8:30 a.m. to 5:30 p.m. To accommodate business needs, employees may be assigned to other workdays and/or hours, including weekends and evenings.   &nbsp;ADA tag: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements and minimum qualifications listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions and/or meet the minimum qualifications.

Savannah College of Art and Design

HVAC Technician II

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

U.S. Renal Care

Dialysis Patient Care Technician

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

Dialysis Patient Care Technician - Float

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients.&nbsp; The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.What you'll be doingPatient care. &nbsp;You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. &nbsp;You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. &nbsp;You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings. PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRON &nbsp;Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!&nbsp;WELDER, PRECISION FINISHING TECHNICIAN&nbsp;Based out of Rocket Lab Headquarters in Long Beach, California the Welder, Precision Finishing Technician will weld and fabricate various fluid systems and sub-assembly components for the Rutherford and Archimedes Rocket engines.&nbsp;&nbsp;WHAT YOU’LL GET TO DO:&nbsp;&nbsp;<ul><li>Follow procedures to set up and operate our welding systems.&nbsp;</li><li>Weld assemblies according to work orders, blueprints and verbal instructions.&nbsp;</li><li>Follow blueprints and to meet product specifications within tight tolerances.&nbsp;</li></ul>YOU'LL BRING THESE QUALIFICATIONS AS A WELDER, PRECISION FINISHING TECHNICIAN:<ul><li>5+ years of experience in welding with a focus on advanced techniques.&nbsp;</li><li>Experience in industries such as Aerospace, Automotive, Shipbuilding, or Construction.&nbsp;</li><li>Familiarity with industry standards and codes (e.g., ASME, ANSI, ISO).&nbsp;</li><li>Proficient in various welding techniques, including TIG, MIG, Stick, and Flux-Cored Arc Welding.&nbsp;</li><li>Ability to read and interpret blueprints, schematics, and welding symbols.&nbsp;</li><li>Experience with welding on different materials such as carbon steel, stainless steel, aluminum, and exotic alloys.&nbsp;</li><li>Experience welding on .011 - .250.&nbsp;</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:&nbsp;<ul><li>Experience in metal fabrication and assembly.&nbsp;</li><li>Experience with Deburring and using pencil grinders. &nbsp;</li><li>Capable of supporting Grinding department.&nbsp;</li></ul>CERTIFICATIONS<ul><li>Certified welder.&nbsp;</li><li>Certifications in specialized welding processes (TIG / Brazing process).&nbsp;</li><li>Certification for specific materials (e.g., Stainless Steel, Aluminum, Titanium, and Inconel).&nbsp;</li></ul>ADDITIONAL REQUIREMENTS:&nbsp;<ul><li>Willing to work 1st shift (Monday-Thursday 5:30am - 3:30pm) or 2nd shift (Monday- Thursday 2:30pm - 1:00am)&nbsp;</li><li>Ability to travel and communicate outside of work hours</li><li>Must be able to work extended hours and/or weekends as needed</li><li>Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position.&nbsp;</li><li>Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls.&nbsp;</li><li>Must be able to walk or stand for extended periods – 8 hours min &nbsp;</li><li>Must be able to lift up to 25lbs. unassisted.&nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$20—$40 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Rocket Lab

Welder, Precision Finishing Technician

USRC's greatest strength in being a leader in the dialysis industry is our ability to recognize and celebrate the differences in our diverse workforce. We strongly believe in recruiting top talent and creating a diverse and inclusive work climate and culture at all levels of our organization.&nbsp;The Biomedical Technician is responsible for overseeing the overall operational condition, maintenance and repair of all water treatment equipment, all medical equipment and mechanical/electrical systems to ensure patient safety and the safety of all staff operating such equipment for their assigned clinic(s).ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.&nbsp; Other duties and tasks may be assigned.&nbsp;<ul><li>Demonstrate effective use of supplies and staff labor hours.</li><li>Assist with purchasing as needed: place orders, perform weekly and month end inventory counts.</li><li>Be familiar with the overall procedures used in Inventory Control (FIFO) and assist in the documentation and control of excess inventory.</li><li>Perform duties as assigned to meet the patient care or operational needs of the clinic.</li><li>Troubleshoot, repair and maintain equipment as recommended by the manufacturer.</li><li>Repair, calibrate, test, clean and disinfect dialysis machines, water distribution loop and RO's according to protocol.</li><li>Perform water quality checks to include but not limited to: free chlorine, total chlorine, and water hardness testing.</li><li>Perform safety checks and tests on all pretreatment water equipment including but not limited to carbon tanks, water softeners, RO units, UV lamps and ultrafilters.</li><li>Collect samples of RO water and dialysate for microbiology testing according to protocol.</li><li>Collect water samples for AAMI analysis testing according to protocol.</li><li>Disinfection of central bicarbonate system and mixing tank according to protocol.</li><li>Disinfection of RO, distribution system, and hemodialysis machines according to protocol.</li><li>Perform duties at all times within limitations established by and in accordance with company policy and procedures, applicable state and federal laws and regulations.</li><li>Perform electrical safety on dialysis machines and related equipment.</li><li>Be familiar with instruction manuals and operation for equipment in accordance with manufacturer's recommendations. Be capable of starting up and shutting down facility's equipment if necessary.</li><li>Maintain established preventative maintenance programs and required support documentation.</li><li>Maintain accurate maintenance records for the facility's equipment.</li><li>Have knowledge of the function and safe operation of water treatment equipment and related mechanical and electrical systems.</li><li>Address physical environment issues which could impact patient and staff safety.</li><li>Mix bicarbonate solution according to protocol. Mix acid concentrate solution according to protocol.</li><li>Assist in receiving, storing and stocking of supplies.</li><li>Be familiar with all emergency equipment and emergency operational procedures.</li><li>Use appropriate safety measures including personal protective equipment as necessary.</li><li>Be familiar with OSHA regulations.</li><li>Update Material Safety Data Sheets (MSDS) as required.</li><li>Be aware of all contracts and contacts necessary for the emergency repair of the clinic's equipment and mechanical systems.</li><li>Obtain quotes from reputable and approved contractors as needed to address physical environment issues.</li><li>Present technical summaries in QAPI meetings.</li><li>Maintain collaborative working relationship with Administrator(s). Partner with Administrator(s) to ensure clinic needs are met.</li><li>Actively promote GUEST customer service standards; develop effective relationships at all levels of the organization.</li><li>Respond effectively to inquiries or concerns.</li><li>Participate in staff meetings as required. Attend in-service and continuing education offerings in compliance with company policy and procedure.</li><li>Complete initial and annual technical training on clinical staff as required.</li><li>Instruct staff in use and care of equipment and answer questions.</li><li>Participate in team concepts and promote a team effort.</li></ul>

Dialysis Biomedical Technician

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRON&nbsp;&nbsp;Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. &nbsp;LEAD COMPOSITE TECHNICIAN&nbsp;The Lead Composite Technician is responsible for leading the build and assembly of composite components used in the production of the Neutron Launch Vehicle structure, and actively participates in hands-on work as part of this working lead role. This will be a highly influential position with daily responsibility for setting job assignments to meet workflow demands and to drive daily progress. The Lead Composite Technician will be a key stakeholder in mentoring and training the team. In this role you must be an inspiring leader and set standards for the team but also be ready to work with your hands in the field.&nbsp;WHAT YOU’LL GET TO DO:  &nbsp;<ul><li>Lead a team of highly qualified composited technicians to ensure clarity and accountability of responsibilities at our Space Structures Complex.&nbsp;</li><li>Coordinate build activities and progress through daily leadership meetings, addressing daily, weekly, and long-term levels.&nbsp;</li><li>Track output of the team against delivery objectives as well as manage capacity planning and schedule of the team&nbsp;</li><li>Drive and encourage improvement projects and work instruction feedback that decrease touch-time, improve quality, or reduce safety risk&nbsp;</li><li>Drive basic preventive maintenance across the facility&nbsp;</li><li>Accountable for the team training and conformance to health and safety policies and procedures, including use of proper PPE&nbsp;</li><li>Assembly of structures including setup, bonding and fastener applications &nbsp;</li><li>Laminate assemblies by determining proper placement of composite materials &nbsp;</li><li>Prepare parts for bagging, including placement of bleeders, thermocouples, probes and vacuum connections &nbsp;</li><li>Vacuum bag processing, bonding, and oven/autoclave curing &nbsp;</li><li>Making basic layouts on parts or assemblies in order to establish reference points and to check dimensions using calipers, micrometers, precision scales and torque wrenches &nbsp;</li><li>Fitting of Honeycomb, foam and syntactic core  &nbsp;</li><li>Fitting and refurbishment of thermal protection systems.  &nbsp;</li><li>Integration of mechanical hardware   &nbsp;</li><li>Perform other standard composite and integration building techniques and practices as industries such as aerospace, space and other composite workplaces demand.  &nbsp;</li><li>You may be requested to work on other products for Rocket Lab in the local area or travel as required. &nbsp;</li></ul>YOU’LL BRING THESE QUALIFICATIONS:   &nbsp;<ul><li>12+ years of experience in mechanical troubleshooting, assembly, installation, or repair within a highly regulated manufacturing or maintenance environment </li><li>High School Diploma or GED &nbsp;</li><li>Familiarity with hand, power, pneumatic, and inspection tools&nbsp;</li><li>Experience leading a team in a production environment&nbsp;</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:  &nbsp;<ul><li>Composite or lamination experience  &nbsp;</li><li>Experienced in Core bond and Splicing &nbsp;</li><li>Broad Industry manufacturing experience from previous appointments &nbsp;</li><li>Advanced Prepreg manufacturing knowledge   &nbsp;</li><li>Resin infusion knowledge   &nbsp;</li><li>Experience working with material data sheets &nbsp;</li><li>Familiarity working with and conforming to drilling, laminating, and assembly prints &nbsp;</li><li>Must be certified or able to become certified in all composites work centers &nbsp;</li><li>Experience training and mentoring composite technicians on industry standards and specific processes &nbsp;</li></ul>ADDITIONAL REQUIREMENTS: &nbsp;<ul><li>Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position &nbsp;</li><li>Able to lift up to 25lbs. unassisted &nbsp;</li><li>Must be able to climb ladders and be comfortable working in tight spaces. &nbsp;</li><li>Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls. &nbsp;</li><li>Must be able to walk or stand for extended periods – 8 hours min  &nbsp;</li><li>Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces  &nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: discounted employee stock purchase program, and free snacks/drinks onsite.Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (MD Only)$35.38—$44.23 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Lead Composite Technician

About the International Motor Sports Association (IMSA):The International Motor Sports Association, LLC (IMSA) was originally founded in 1969 and owns a long and rich history in sports car racing. Today, IMSA is the sanctioning body of the IMSA WeatherTech SportsCar Championship, the premier sports car racing series in North America. IMSA also sanctions the IMSA Michelin Pilot Challenge, IMSA VP Racing SportsCar Challenge and Historic Sportscar Racing, as well as five one-make series: Ferrari Challenge North America, Lamborghini Super Trofeo North America, Mazda MX-5 Cup, Mustang Challenge and Porsche Carrera Cup North America. IMSA – a company within the NASCAR family – is the exclusive strategic partner in North America with the Automobile Club de l’Ouest (ACO) which operates the 24 Hours of Le Mans as a part of the FIA World Endurance Championship. The partnership enables selected IMSA WeatherTech SportsCar Championship competitors to earn automatic entries into the prestigious 24 Hours of Le Mans. For more information please visit&nbsp;<a href="http://www.IMSA.com,&nbsp;www.twitter.com/IMSA,&nbsp;www.facebook.com/IMSA" target="_blank">www.IMSA.com,&nbsp;www.twitter.com/IMSA,&nbsp;www.facebook.com/IMSA</a> or <a href="http://www.instagram.com/imsa_racing" target="_blank">www.instagram.com/imsa_racing</a>.Job Title: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Transport Driver (Full Time)Department: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; LogisticsFLSA Status: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; ExemptPrepared Date:&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; September 1, 2022Reviewed Date: &nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; September 1, 2022SUMMARYThis position requires a professional transport (truck) driver to drive an IMSA transporter (with trailer) to and from events and/or fly to and from events.&nbsp; In addition to professional truck driving duties, this position is also responsible for set-up and teardown of equipment utilized throughout the event week/weekend as well as maintaining all equipment in a functional and professional appearing manner.&nbsp;Position would also require period travel to the IMSA transportation hub over off-event days to perform fleet maintenance, repair and other duties as assigned.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.Drive transporter, often on an interstate basis, for all required events. Must be able to drive to events as prescribed while maintaining all Department of Transportation (DOT) requirements necessary to operate a transporter (i.e., Commercial Driver’s License, testing, drive time regulations, etc.).Truck and trailer loading and unloading; setting up and breaking down of awnings, tech equipment and any equipment as needed.Truck and trailer scheduling and minor maintenance.Work to support all weekend officials by maintaining equipment and supplies; staff any IMSA trailers as needed.Responsible for equipment maintenance and care including cleaning, restocking and upkeep.Prepare truck logs, complete timecards, and fuel reports after all trips.Conducting thorough pre and post trip reports.Experience with Electronic Logging Devices (ELD) for DOT compliance.After performing set-up duties at the race event, will also be asked to perform other tasks to help augment other staffing needs around other departments.Required to operate forklifts and supporting equipment.Periodically work at the IMSA transportation hub on off-event days.Maintain a professional appearance and demeanor.Approximate travel required:&nbsp; 70% including weekends and multi-day travel.SUPERVISORY RESPONSIBILITIESThis job has no supervisory responsibilities.QUALIFICATIONS&nbsp; To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.EDUCATION and/or EXPERIENCEOne (1) year certificate from college or technical school and/or five (5) years truck driving and at-race track service experience; or equivalent combination of education and experience.&nbsp; Minimum of one (1) year forklift operation experience is a plus.LANGUAGE SKILLSAbility to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.&nbsp; Ability to write reports, business correspondence, and procedure manuals.&nbsp; Ability to effectively present information and respond to questions from small groups, customers, clients, managers, and other employees of the organization.MATHEMATICAL SKILLSAbility to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.&nbsp;COMPUTER SKILLSProficient on Company provided hardware and software. Must be able to work with Electronic Logging Devices (ELD) for DOT compliance in trucks.REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Ability to make decisions and think in a fast-paced work environment. OTHER REQUIREMENTS / SKILLS Maintain a professional appearance and demeanor at all times. Ability to interact with internal and external stakeholders. High level of attention to detail. CERTIFICATES, LICENSES, AND REGISTRATIONS Commercial Driver’s License (CDL), Class A required and IMSA License. PHYSICAL DEMANDS&nbsp; The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly required to stand and walk approximately 10 hours per day; use hands to finger, handle, or feel; and reach with hands and arms.&nbsp; The employee is frequently required to stoop, kneel, crouch or crawl.The employee is occasionally required to talk or hear, sit, climb, or balance, and taste or smell.&nbsp; The employee must frequently lift and/or move more than 75 pounds.&nbsp; Specific vision abilities required by this job include close vision, distant vision, color vision, peripheral vision, depth perception and ability to adjust focus.The Driver must be able to pass the DOT physical and DOT required drug screenings.Apply Now!Learn more about this role and our team by applying at <a href="http://www.careers.nascar.com" target="_blank">www.careers.nascar.com</a> for consideration.We are a company unlike any other. We want you to bring your experience, skills and passion to our close-knit, high-energy environment in which our employees thrive and where you can prosper. We know the key to our success is our employees and we offer highly competitive salaries, a solid benefits package focused on wellness, and opportunities for you to grow and develop both personally and professionally. It won’t take you long to find out that you are on the right track here at NASCAR!NASCAR is committed to fostering a diverse work environment where all employees feel valued and empowered. NASCAR is an Equal Opportunity Employer (EEO). We seek to attract and retain the best qualified people available. All qualified applicants will receive consideration for employment without regard to race, color, gender, gender identity and expression, age, national origin, disability, religion, sexual orientation, genetic information, pregnancy, veteran status or any basis that is protected by applicable law except where a bona fide occupational qualification exists.Follow us on Twitter @NASCARJobs to stay current on all of our openings.

1,088 Technician Jobs