field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

USRC's greatest strength in being a leader in the dialysis industry is our ability to recognize and celebrate the differences in our diverse workforce. We strongly believe in recruiting top talent and creating a diverse and inclusive work climate and culture at all levels of our organization.&nbsp;The Biomedical Technician is responsible for overseeing the overall operational condition, maintenance and repair of all water treatment equipment, all medical equipment and mechanical/electrical systems to ensure patient safety and the safety of all staff operating such equipment for their assigned clinic(s).ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.&nbsp; Other duties and tasks may be assigned.&nbsp;<ul><li>Demonstrate effective use of supplies and staff labor hours.</li><li>Assist with purchasing as needed: place orders, perform weekly and month end inventory counts.</li><li>Be familiar with the overall procedures used in Inventory Control (FIFO) and assist in the documentation and control of excess inventory.</li><li>Perform duties as assigned to meet the patient care or operational needs of the clinic.</li><li>Troubleshoot, repair and maintain equipment as recommended by the manufacturer.</li><li>Repair, calibrate, test, clean and disinfect dialysis machines, water distribution loop and RO's according to protocol.</li><li>Perform water quality checks to include but not limited to: free chlorine, total chlorine, and water hardness testing.</li><li>Perform safety checks and tests on all pretreatment water equipment including but not limited to carbon tanks, water softeners, RO units, UV lamps and ultrafilters.</li><li>Collect samples of RO water and dialysate for microbiology testing according to protocol.</li><li>Collect water samples for AAMI analysis testing according to protocol.</li><li>Disinfection of central bicarbonate system and mixing tank according to protocol.</li><li>Disinfection of RO, distribution system, and hemodialysis machines according to protocol.</li><li>Perform duties at all times within limitations established by and in accordance with company policy and procedures, applicable state and federal laws and regulations.</li><li>Perform electrical safety on dialysis machines and related equipment.</li><li>Be familiar with instruction manuals and operation for equipment in accordance with manufacturer's recommendations. Be capable of starting up and shutting down facility's equipment if necessary.</li><li>Maintain established preventative maintenance programs and required support documentation.</li><li>Maintain accurate maintenance records for the facility's equipment.</li><li>Have knowledge of the function and safe operation of water treatment equipment and related mechanical and electrical systems.</li><li>Address physical environment issues which could impact patient and staff safety.</li><li>Mix bicarbonate solution according to protocol. Mix acid concentrate solution according to protocol.</li><li>Assist in receiving, storing and stocking of supplies.</li><li>Be familiar with all emergency equipment and emergency operational procedures.</li><li>Use appropriate safety measures including personal protective equipment as necessary.</li><li>Be familiar with OSHA regulations.</li><li>Update Material Safety Data Sheets (MSDS) as required.</li><li>Be aware of all contracts and contacts necessary for the emergency repair of the clinic's equipment and mechanical systems.</li><li>Obtain quotes from reputable and approved contractors as needed to address physical environment issues.</li><li>Present technical summaries in QAPI meetings.</li><li>Maintain collaborative working relationship with Administrator(s). Partner with Administrator(s) to ensure clinic needs are met.</li><li>Actively promote GUEST customer service standards; develop effective relationships at all levels of the organization.</li><li>Respond effectively to inquiries or concerns.</li><li>Participate in staff meetings as required. Attend in-service and continuing education offerings in compliance with company policy and procedure.</li><li>Complete initial and annual technical training on clinical staff as required.</li><li>Instruct staff in use and care of equipment and answer questions.</li><li>Participate in team concepts and promote a team effort.</li></ul>

U.S. Renal Care

Dialysis Biomedical Technician

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients.&nbsp; The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.What you'll be doingPatient care. &nbsp;You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. &nbsp;You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. &nbsp;You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings. PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

Dialysis Patient Care Technician

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

Dialysis Patient Care Technician - PCT Chronic In-center

ResponsibilitiesAbout Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at <a href="http://www.howmet.com/esg-report" target="_blank">www.howmet.com/esg-report</a>. Howmet Fastening Systems is looking for a Machine Technician Chucker Operator in our Torrance, CA location. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipmentGeneral Summary:Independently sets up and operates Chucker machine to perform machining operations such as castings, turnings, boring, threading and forging. This position also trains/mentors' new operators in the department.Specific Responsibilities:<ul><li>Independently performs set-up within standard time per router; operating, troubleshooting and machine service work&nbsp;</li><li>Adjusts machine parts, tooling, including sharpening tools on surface or pedestal grinders</li><li>Responsible for producing and maintaining high level quality parts&nbsp;</li><li><a href="https://www.bing.com/ck/a?!&amp;&amp;p=fa46645cff688181b802b8d1f06016162d9066eb7d8cbb15ae1b83fdecf4281eJmltdHM9MTc2MTY5NjAwMA&amp;ptn=3&amp;ver=2&amp;hsh=4&amp;fclid=2c2ac96a-29d6-625a-0fa3-df3e28a86380&amp;u=a1aHR0cHM6Ly9wY2N0YWxlbnRhY3F1aXNpdGlvbnBvcnRhbC50YWwubmV0L3Z4L21vYmlsZS0wL2FwcGNlbnRyZS1leHQvYnJhbmQtNy9jYW5kaWRhdGUvc28vcG0vMS9wbC8zL29wcC81NTI5LUNodWNrZXItTWFjaGluZS1PcGVyYXRvci1TaGlmdC0xLUNoZXJyeS9lbi1HQg&amp;ntb=1" target="_blank">Moves controls, cams, and stops to set rotation speeds and feed rates, and to control tool and workpiece movement for specified operatio</a>ns</li><li>Work with various types of materials such as Titanium, Inconel, 4130, 17-4, A-286, Aluminum and other stainless steel</li><li>Perform first piece verification process per part print as required&nbsp;</li><li>Perform Lock/Out Tag/Out (LOTO)&nbsp;</li><li>Run multiple machines as required while maintaining high quality parts, efficiency and productivity per standard time on router</li><li>Perform Preventative Maintenance sheet daily&nbsp;</li><li>Takes initiative to perform daily 5s in assigned area and machinery&nbsp;</li><li>Active involvement in Autonomous Maintenance and process improvements initiatives</li><li>Perform Statistical Process Control (SPC)</li><li>Train new operators as required&nbsp;</li><li>Follow all EHS Policies, Procedures and report all incidents immediately</li><li>Selects, mounts, and adjusts cutting tools; regulates time cycles; sets machine speeds, feeds and stops.</li><li>Applies complete knowledge of machinists hand and measuring tools.&nbsp;</li><li>Applies knowledge of metals, alloys, cutting oils and coolants, as required.&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li><li>Parts to be lifted and/or transported may weigh up to 30 lbs.</li><li>Works independently&nbsp;</li><li>Keeps work area clean, safe and in an orderly fashion on a daily basis.</li><li>Performs other tasks of equal or lesser skill as required.</li></ul>QualificationsEducation:High school diploma, General Education Degree (GED), or apprenticeship requiredExperience and Background:<ul><li><a>5+ suggested years of total experience</a></li><li>Read and interpret part drawings, work instructions, policies and procedures&nbsp;</li><li>Able to use the necessary measuring tools (Mircometers, Calipers, Dial Indicators, Comparator, Gages, etc) as required&nbsp;</li><li>Know basic troubleshooting skills&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li><li>Adjusts machine parts and tooling&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li><li>Perform 1st piece verification process per part print&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li><li>Perform LOTO&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li><li>Perform Preventative Maintenance sheet&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li><li>Perform SPC and System 21 &amp; 22 per part print&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li><li>Calculate feeds and speeds&nbsp;</li><li>Run multiple machines simultaneously</li><li>Train other operators</li><li>Resharpen tooling</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.&nbsp;</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant’s ability to lawfully obtain access to such items.</li></ul>

Howmet Aerospace

Machining Technician, Chucker Operator

ResponsibilitiesThis off-shift&nbsp;LAUE TECHNICIAN&nbsp;position will be located in our Plant 10, Whitehall Casting Operation.&nbsp; Primary responsibilities will include:<ul><li>Process and inspect castings per customer requirements using specific inspection techniques.&nbsp;</li><li>Work within assigned area as a team member to maintain production schedules.</li><li>Inputs inspection data into computerized traceability system.</li><li>Complies with all EHS rules required for the position.&nbsp;</li><li>Performs other duties as assigned.</li><li>Must be willing to work overtime and off-shift as required by production schedules.</li><li>The work week may include Saturday and Sunday as regular scheduled hours.</li></ul>Must be able to work off-shift (2nd, 3rd, and weekend crew)QualificationsBasic Qualifications:<ul><li>High school diploma or GED from an accredited institution.</li><li>Minimum of two years work experience; or six months continuous manufacturing experience.&nbsp;</li><li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>Preferred Qualifications:<ul><li>Industrial manufacturing and/or quality control/non-destructive inspection experience,</li><li>Previous experience with industrial radiography.</li><li>Basic computer skills.</li><li>Ability to read and interpret specifications.</li></ul>

LAUE TECHNICIAN (NDT Inspection) - Plant 10

ResponsibilitiesHowmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. Howmet Dover Casting is a world-class supplier of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets.Howmet Aerospace is currently looking a&nbsp;Casting Technician&nbsp;to join our&nbsp;Dover Casting&nbsp;group in&nbsp;Dover, New Jersey.&nbsp;The work hours for this position will be&nbsp;Weekend Nights Shift Friday Sat, Sun 6PM-6AM).&nbsp; Training will be on Day shift (Monday - Friday 6:00A - 2:00P) for several monthsAnticipated Pay Range: $24 - $25.50 per hour.&nbsp; *Pay rates within this range are determined based on various factors including experience, education, certifications, etc.We are proud to offer a competitive benefits package, including comprehensive Health, Dental, and Vision insurance coverage, matching 401K, Life Insurance, &nbsp;Short Term Disability, Performance Pay Bonus, &nbsp;Paid Time Off, Wellness Programs, EAP Program (free local gym membership) &nbsp;as&nbsp; well as other discounted benefitsPOSITION OVERVIEWThis position is responsible for pouring the molten metal into the casting molds.ENVIRONMENTAL HEALTH &amp; SAFETY RESPONSIBILITIES<ul><li>Expected to assist in the implementation of Howmet's EHS value and policy statement and its accompanying principles.</li><li>Comply with all department, facility, Corporate and Regulatory EH&amp;S regulations.</li><li>Wear all required personal protective equipment.</li><li>Report all job-related illness and injuries. (Per employee handbook).</li><li>Report all Safety, Health &amp; Environmental concerns to your supervisor in a timely manner.</li><li>Attend all EH&amp;S training.</li></ul>ESEENTIAL JOB FUNCTIONS<ul><li>Melts and pours alloy into refractory molds in accordance with standard operating procedures.</li><li>Operates complex vacuum and air melt equipment.</li><li>Generates written reports and maintains department records.</li><li>Inspects refractory molds prior to casting.</li><li>Trains colleagues.</li><li>Notifies supervision or Engineering of problems with molds, equipment, etc.</li><li>Other duties as assigned by supervisor.</li><li>Must be able to read, write and communicate English.</li><li>Must be able to work with computers.</li></ul>QualificationsBASIC QUALIFICATIONS<ul> <li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.&nbsp;</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li> <li>No relocation benefit is offered for this position. Candidates residing within a 50 miles radius of Dover NJ will only be considered.&nbsp;&nbsp;</li> <li>High School Diploma or GED from an accredited institution.</li></ul>PREFERRED QUALIFICATIONS<ul> <li>Must complete Casting Training Program</li> <li>The employee is also required to fulfill the requirements of a Mold Handler due to the nature of the job and the variability that it requires</li> <li>Is capable of performing mold inspection function</li> <li>Able to communicate well with others</li> <li>Must be able to perform basic math skills</li></ul>PHYSICAL DEMANDS/EQUIPMENT USED &nbsp;<ul> <li>Requires lifting of up to 50 lbs. on an occasional basis (up to 33% of an 8-hour day) from waist/ knuckle to shoulder/ overhead height.</li> <li>Any weights over 70 lbs. require the use of assistive devices and/ second person assist, if and when possible.&nbsp;</li> <li>Pushing and pulling tasks performed using a 4 wheeled cart, involves weights up to 300 lbs. or more.&nbsp;</li> <li>Employee will lift up to 50 lbs. with mold handler tongs, which would be required on the job occasionally.</li> <li>Must work in a hot, industrial environment.</li> <li>Lifting devices</li> <li>Ovens</li> <li>Vacuum Casting Units</li></ul>DisclaimerThe above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

1,115 Technician Jobs