field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

Title: Associate Instructor of Automotive Technology
Employee Classification:&nbsp;Faculty
Institution:&nbsp;TCAT-Knoxville
Department: Automotive Technology
Campus Location: TCAT Knoxville - Anderson County Higher Education Center
Job Summary
The Tennessee College of Applied Technology Knoxville is accepting applications for the position of full-time Associate Instructor in Automotive Technology to be located at the Anderson County Higher Education Center. This position works 7.5 hours per day and 37.5 hours per week, Monday through Friday from 7:30 am until 3:30 pm. POSITION SUMMARY: To provide quality instruction for student learning and to maintain a positive learning environment in the classroom. 
Job Duties
<ul>
<li>Ability to effectively apply a multi-method approach to enhance student understanding of materials, including demonstrations, lectures, hands-on activities, and experience at job sites, to provide the student with the knowledge needed to gain employment in the automotive industry.</li>
<li>Ability to understand which teaching methods best serve the student’s needs, interests, and learning ability.</li>
<li>Ability to develop accurate and objective standards to measure learning or administer testing or other evaluations to determine effectiveness and ensure a high level of comprehension has been achieved.</li>
<li>Ability to teach basic and advanced automotive courses and the eight areas of ASE certification.</li>
<li>Build and maintain relationships with area employers to facilitate the referral and employment of career and technical students. • Cooperate with outside agencies; work with program advisory committees; conduct visits to business and industry; establish and maintain good public relations with the school’s general public.</li>
<li>Work in cooperation with other departments and the community to enhance employment opportunities for students.</li>
<li>Responsible for surveys, records, and reports of program graduates.</li>
<li>Communicate effectively in a professional, tactful, and courteous manner with students, employees, faculty, and the general public.</li>
<li>Ensure that all activities are conducted within the established guidelines of the Family Educational Rights and Privacy Act (FERPA).</li>
<li>Perform assigned responsibilities, duties, and tasks according to established practices, procedures, techniques, and standards in a safe manner and with minimal supervision.</li>
<li>Participate in professional development and growth annually. &nbsp;</li>
<li>Perform other duties as assigned. - (Essential)</li>
</ul>
Minimum Qualifications
• Technical diploma or Associate degree in Automotive Technology or related field. • Three years of current full-time work experience in the automotive field. • Must possess all required ASE certifications and/or accreditations for the field or the ability to become certified. 
Preferred Qualifications
• Current ASE Master Technician Certification • Teaching experience • Knowledge of Tennessee Board of Regents (TBR) policies and procedures • Skill in managing deadlines and working in a team-oriented environment
Knowledge, Skills, and Abilities
• Possess organizational and communication skills necessary to be an effective instructor • Ability to exercise good judgment in evaluating situations and making decisions • Strong customer service skills • Computer skills, including general knowledge of Microsoft Word and Excel
PHYSICAL DEMANDS AND WORKING ENVIRONMENT: The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. 
Environment: Work is performed in a classroom and shop setting with frequent interruptions and distractions. &nbsp;&nbsp;The majority of work performed (30 hours per week) will be instructing and training students, with the remaining 7.5 hours utilized for grading, recording attendance, and individual student meetings.&nbsp;
Physical: Primary functions require sufficient physical ability and mobility to work in a classroom and shop setting; to see and discern color, since electrical wiring is often color-coded; to stand or sit for prolonged periods of time, to stand and climb ladders; and to effectively communicate to exchange information.
SALARY:&nbsp; In accordance with Tennessee Board of Regents guidelines, within the range of $50,894 - $60,074.
APPLICATION SUBMISSION &amp; REVIEW: To be considered for a position at TCAT Knoxville, you must create and submit an online application that includes uploads of your required documents. Your skills, abilities, qualifications, and years of experience will be evaluated using what is recorded on your application. Please be sure to include the complete beginning and end dates under your employment history. Scan and attach the required documents to the online application in Word or PDF format. Review of applicants will begin immediately and continue until the position is filled.
REQUIRED DOCUMENTS: Resume Educational transcripts Certifications
Applications are open until 01/05/2026.
EMPLOYMENT DOCUMENTS: Current federal law requires identification and eligibility verification prior to employment. Only U.S. citizens and aliens authorized to work in the United States may be employed. An offer of employment is contingent upon a successful background check.

Motlow State Community College


      Associate Instructor of Automotive Technology
    

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients.&nbsp; The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.What you'll be doingPatient care. &nbsp;You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. &nbsp;You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. &nbsp;You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings. PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

U.S. Renal Care

Dialysis Patient Care Technician

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

Dialysis Patient Care Technician - PCT Chronic In-center

<h4>Service (Maintenance) Technician&nbsp;&nbsp;</h4>Southfork - Lakeville, MN Work Schedule: Monday - Friday | 8:00AM - 5:00PM What's in it for you?&nbsp;The base salary for this position is expected to be at $21.00 - $23.50/hour, with the actual base salary amount dependent on a number of factors, including but not limited to a candidate's credentials, relevant experience, and primary job location, with consideration given to internal equity. This position is also eligible for:<ul><li>On call pay and Quarterly Renewal Bonuses</li><li>Competitive PTO</li><li>Generous time off - 10 paid holidays, plus diversity day and your birthday</li><li>Paid Caregiver and Paid Parental Leave</li><li>20% Rent, Parking, and Storage Discount for Centerspace rents</li><li>32 Paid Hours of Volunteer Time Off</li><li>Medical/Dental/Vision Benefits – 1st of Month Following Start Date</li><li>Centerspace Stock Purchase Plan</li><li>401(k) match up to 5% per paycheck</li><li>Tuition Reimbursement &amp; Scholarship Program</li></ul>About Centerspace:&nbsp;Centerspace&nbsp;was founded in Minot, North Dakota, in 1970. You can find our corporate support offices located in Minneapolis, Minnesota and in Minot North Dakota, along with onsite operations in six states. From Denver, CO to Minneapolis, MN, our company continues to grow throughout the Midwest, proudly providing apartment homes to thousands of residents, extending our vision to be the premier provider of apartment homes in vibrant communities by focusing on integrity and serving others.&nbsp;Centerspace is built around our employees.&nbsp; Our Mission and Vision unites our employees as one team.Service Technician A Day in the Life: In our entry level Service Technician role, you will work with the Service team to help prepare new apartment homes for our residents. You will be assisting in routine repairs of building systems and completing service requests. You play a supporting role in the upkeep of the property’s buildings and grounds, while providing excellent customer service to our residents. Key Role Responsibilities:<ul><li>Perform general maintenance such as plumbing, electrical, HVAC repairs, carpentry, appliance repairs, painting/drywall, etc.</li><li>Maintain efficient operation and upkeep of the property buildings and grounds</li><li>Perform routine maintenance on vacant units prior to new resident occupancy</li><li>Respond to resident service requests; enter and track requests using a work order system</li><li>Keep all amenity areas in clean and operable condition. Seasonally, assist with snow removal and groundskeeping.</li></ul>Requirements Include:<ul><li>Must be available for on-call work (possible evening, weekend, and overnight calls) via a rotating schedule.</li><li>Valid driver’s license.</li><li>Willingness to learn and complete plumbing, electrical, carpentry, dry-wall and painting tasks. Prior knowledge in these areas is helpful, but not required.</li></ul>We can’t create Better Every Days without YOU! Apply now!

Centerspace

Service (Maintenance) Technician

ResponsibilitiesMaintenance Technician - Cast HouseNight Crew (7PM-7AM) -12 Hour CrewingStarting Rate: $35.00/hour+ based on experienceAre you an energetic and dependable employee that takes pride in your craft? Would you like to be a part of a dynamic and growing manufacturing business in Barberton, OH? Our organization is dedicated to rapid, profitable growth through continuous capital investment, operational excellence, and career development. Howmet is a company that promotes and develops from within with worldwide opportunities and we're looking for someone like you to join our team as a&nbsp;Full-Time Maintenance Technician (Night Crew, 7PM-7AM)&nbsp;in a cast house production environment. If you are interested in taking the next steps in your career, we encourage you to apply!Company Benefits: We offer eligible employees a comprehensive benefits package designed to assist employees and their families with financial security, health, and well-being. In addition to competitive pay, we off a variety of benefit programs.<ul> <li>Medical, Life, Dental and Vision Plans</li> <li>401(k) Program with a Company Match</li> <li>Performance Pay based on company results</li> <li>Paid vacation accrual</li> <li>10 annual paid holidays</li> <li>Employee discount programs</li> <li>Starting at $35.00-$42.35/hrwith an additional $1.00/hr shift differential for night crew</li></ul>WHAT IS A CAST HOUSE?The Cast House is a structure that holds an aluminum smelter. Howmet Aerospace's smelters are among&nbsp;the safest in the world. Our modern aluminum smelter will require trained and skilled operators.Position Summary:&nbsp; This position is for a role in the maintenance department at Howmet Aerospace’s Barberton Aluminum Remelt Foundry, known as the Howmet Barberton Cast House. The plant operates a state-of-the-art and highly automated continuous horizontal aluminum casting operation on a nonstop (24/7/365) schedule.&nbsp;This is a fast paced and safety critical operation.The position is tasked with the daily maintenance requirements for maintaining the equipment and cast lines operational, which includes championing the safety of all crew members, maintaining the integrity of equipment and other facility upkeep tasks with an emphasis on machine repair.The maintenance technician is tasked with supporting all aspects of the maintenance organization, performing preventative maintenance on equipment throughout the lifecycle of the casting process, troubleshooting malfunctioning equipment and performing repairs, and participating in reviews and special projects aimed at increasing equipment reliability. &nbsp; Essential Duties:<ul> <li>Repairs, maintains and troubleshoots continuous process machinery performing mechanical and electrical repairs on equipment such as motors, pneumatic systems, conveyor systems, hydraulic systems, water systems, production machines and equipment in accordance with diagrams, specifications and operator’s manuals.</li> <li>Dismantles devices and machines to gain access to and remove defective parts using hoists, hand tools, power tools, and cranes</li> <li>Performing necessary maintenance work, such as replacing pumps, motors, chains ,spokets, cables, repair or replace drives, troubleshoot PLC logic, fabricate and mount guards, troubleshoot and adjust hydraulics.</li> <li>Maintains personal safety equipment and promotes BCC Safety Regulations</li> <li>Completes required PM’s and associated paperwork (CMMS System) Akron</li></ul>QualificationsBasic Qualifications<ul> <li>High School Diploma or GED (from an accredited institution)</li> <li>Minimum of two years' experience performing mechanical OR electrical maintenance in a manufacturing environment</li> <li>Knowledge and experience reading electrical and hydraulic drawings/schematics</li></ul>Preferred Qualifications<ul> <li>Knowledge and experience working with combustion systems</li> <li>Demonstrated knowledge and competencies relating to employee, equipment and product safety</li> <li>Experience with equipment troubleshooting</li> <li>Knowledge of mechanical and electrical repairing of machines, machine parts and maintenance practices</li> <li>Experience with performing preventative maintenance on equipment</li> <li>Five years experience performing mechanical and electrical maintenance in a manufacturing environment or foundry</li></ul>Working Conditions:<ul> <li>Full time. Occasional weekend over-time work required.</li></ul>Physical Demands:<ul> <li>Lifting&nbsp;:&nbsp; Moderately Heavy - Lift on an occasional basis a maximum of 40 pounds</li> <li>Standing:&nbsp; Constantly (greater than 80% of workday)</li> <li>Walking:&nbsp; Constantly (greater than 80% of workday)</li> <li>Bending and Twisting:&nbsp; Constantly (greater than 80% of workday)</li> <li>Temperature Extremes (percent of time working in non-climate controlled, production environment):&nbsp; Constantly (greater than 80% of workday)</li> <li>Noise (percent of time working in noisy, production environment):&nbsp; Constantly (greater than 80% of workday)</li></ul>This description is a general statement of duties and responsibilities performed on a regular and continuous basis.&nbsp; This description is not intended to be all inclusive and other related duties may be assigned.&nbsp;&nbsp;<ul> <li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.&nbsp;</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> About Howmet Wheel System is sold under Alcoa® Wheels brand which is a global leader in the commercial transportation industry, renowned for inventing the forged aluminum wheel in 1948. With a steadfast commitment to advancing technology, Alcoa Wheels has achieved a 35% weight reduction of forged aluminum wheels since 1996. The newest wheel ULT36 weighs a mere 36 lbs. Alcoa Wheels delivers breakthrough solutions with proprietary alloy and surface treatment technologies such as Dura-Bright®, Dura-Flange®, and Dura-Black®. All its innovative efforts make trucks, trailers, and buses lighter, more fuel-efficient, durable, and visually striking. With a global presence and extensive manufacturing capabilities, Alcoa® Wheels is dedicated to leading the industry toward a greener and more prosperous future.

1,052 Technician Jobs