field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

Join the Clean Energy RevolutionBecome a Junior Communications Technicianat Southern California Edison (SCE) and build a better tomorrow.&nbsp;As a&nbsp;Junior Communications Technician, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?Responsibilities<ul><li>In this job, you’ll work and learn, under the direction of a senior worker, from drawings, specifications, and instructions to construct, operate, and maintain microwave and multiplex systems, mobile radio systems (including base stations, control circuits, and mobile radios), power line, open wire and cable carrier systems, digital systems, data circuits, DC power systems used for communication equipment.</li></ul>Minimum Qualifications<ul><li>One year of experience working in the telecommunication, electronics and/or electricity field.</li><li>One year of experience operating mechanical and electrical equipment, drive trucks, vans, or similar vehicles</li><li>Maintain a valid US Driver's license.</li><li>Perform hard physical labor, identify color coded cable, and ability to act effectively in the indicative duties listed above.</li><li>The knowledge, skills, and abilities for this job are of a level comparable to those normally acquired through a trade school or high school education and experience in related electrical and electronic work.</li><li>Must be able to lift up to 75 lbs.</li></ul>Additional Information<ul><li>This position’s work mode is&nbsp;on-site. The employee will report to an SCE facility or in the field location.&nbsp; Further details of this work mode will be discussed at the interview stage. The work mode can be changed based on business&nbsp;</li><li>Visit our&nbsp;Candidate Resource&nbsp;page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!</li><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. </li><li>Position will require up to&nbsp;75% traveling and being out in the field throughout the SCE service territory.&nbsp;</li></ul>Testing<ul><li>This position requires testing and applicants who are identified to continue through the selection process will be invited to test via email. Reference our&nbsp;Information Guides&nbsp;for the following tests: (EEI TECH (Test #5107) Junior Communications Tech Test (Test #2982)).&nbsp; Candidates who have previously passed these assessment(s), in some cases, may not need to retest again for this position.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.Southern California Edison is a proud Equal Opportunity Employer, including disability and protected veteran status. We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

Southern California Edison

Junior Communications Technician

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRON &nbsp;Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!&nbsp;WELDER, PRECISION FINISHING TECHNICIAN&nbsp;Based out of Rocket Lab Headquarters in Long Beach, California the Welder, Precision Finishing Technician will weld and fabricate various fluid systems and sub-assembly components for the Rutherford and Archimedes Rocket engines.&nbsp;&nbsp;WHAT YOU’LL GET TO DO:&nbsp;&nbsp;<ul><li>Follow procedures to set up and operate our welding systems.&nbsp;</li><li>Weld assemblies according to work orders, blueprints and verbal instructions.&nbsp;</li><li>Follow blueprints and to meet product specifications within tight tolerances.&nbsp;</li></ul>YOU'LL BRING THESE QUALIFICATIONS AS A WELDER, PRECISION FINISHING TECHNICIAN:<ul><li>5+ years of experience in welding with a focus on advanced techniques.&nbsp;</li><li>Experience in industries such as Aerospace, Automotive, Shipbuilding, or Construction.&nbsp;</li><li>Familiarity with industry standards and codes (e.g., ASME, ANSI, ISO).&nbsp;</li><li>Proficient in various welding techniques, including TIG, MIG, Stick, and Flux-Cored Arc Welding.&nbsp;</li><li>Ability to read and interpret blueprints, schematics, and welding symbols.&nbsp;</li><li>Experience with welding on different materials such as carbon steel, stainless steel, aluminum, and exotic alloys.&nbsp;</li><li>Experience welding on .011 - .250.&nbsp;</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:&nbsp;<ul><li>Experience in metal fabrication and assembly.&nbsp;</li><li>Experience with Deburring and using pencil grinders. &nbsp;</li><li>Capable of supporting Grinding department.&nbsp;</li></ul>CERTIFICATIONS<ul><li>Certified welder.&nbsp;</li><li>Certifications in specialized welding processes (TIG / Brazing process).&nbsp;</li><li>Certification for specific materials (e.g., Stainless Steel, Aluminum, Titanium, and Inconel).&nbsp;</li></ul>ADDITIONAL REQUIREMENTS:&nbsp;<ul><li>Willing to work 1st shift (Monday-Thursday 5:30am - 3:30pm) or 2nd shift (Monday- Thursday 2:30pm - 1:00am)&nbsp;</li><li>Ability to travel and communicate outside of work hours</li><li>Must be able to work extended hours and/or weekends as needed</li><li>Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position.&nbsp;</li><li>Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls.&nbsp;</li><li>Must be able to walk or stand for extended periods – 8 hours min &nbsp;</li><li>Must be able to lift up to 25lbs. unassisted.&nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$20—$40 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Rocket Lab

Welder, Precision Finishing Technician

Title Conservation Technician&nbsp; Description Department: Registration and Collections ManagementReports to: Associate Objects ConservatorJob Type: Part-time – RegularJob Classification: Hourly (Non-exempt)Workplace Location: Los Angeles – Academy Museum Summary/Objective: The Conservation Technician will support the Museum’s conservators and collections registrars in a range of conservation and preservation tasks. Primary responsibilities include preventive conservation, gallery maintenance, environmental monitoring, pest management, routine dusting of objects on open display, and assisting with installations. Additional tasks include preparing cleaning and adhesive solutions, entering data into the collections database, and assisting with minor conservation treatments.This position is represented by a union.Essential Functions of the Job: <ul><li>Assist with downloading environmental dataloggers, preparing reports, and analyzing the data.</li><li>Assist with preventive and active pest management, including creating anoxic chambers.</li><li>Assist with routine gallery maintenance, including checking light levels and cleaning of open-air displays.</li><li>Examine artwork and create written and photographic documentation. Photography instruction will be provided.</li><li>Perform minor conservation treatments, including solvent and mechanical surface cleaning.</li><li>Assist Textile Conservator with preparing mannequins for exhibition.</li><li>Assist with daily conservation laboratory tasks (e.g., keeping SDS information up to date, preparing adhesives and cleaning solutions, and studio maintenance).</li><li>Assist with material analysis.</li><li>Assist with object handling and moving artwork.</li><li>Communicate and maintain effective working relationships with co-workers by contributing to a positive working environment based on mutual respect, collegiality, and collaboration.</li><li>Assist registrars with various collection handling and database work.</li></ul> Required Competencies: <ul><li>1+ years of related education, training, and/or experience working with a conservator in an institutional or private practice setting required.</li><li>At least one semester of college-level chemistry with an in-person lab.</li><li>Knowledge of safe art handling practices and Museum collections care.</li><li>Experience writing examination reports for artwork required.</li><li>Experience performing minor surface cleaning of artwork, such as with a vacuum and brushes required.</li><li>Competency in working with power tools and using basic conservation tools, such as scalpels and handmade cotton swabs.</li><li>Ability to read and interpret Safety Data Sheets, laboratory rules, and conservation documentation documents.</li><li>Experience using Microsoft Office for generating reports. Experience using iPads is desired.</li><li>Ability to multi-task in a fast-paced environment.</li><li>A commitment to diversity, equity, accessibility, and inclusion.</li></ul> Physical Requirements:<ul><li>Ability to move and transport objects up to 50 pounds.</li><li>Ability to climb ladders.</li><li>Ability to remain in a stationary position for extended periods.</li></ul> Required Vaccination: Full vaccination against COVID-19 is required, including any booster vaccinations as applicable. Exception:Medical and religious accommodations approved by the Office of People &amp; Culture. Compensation: The expected salary for this role is $25.00 per hour. The actual base pay offered will be determined by factors such as experience, skills, training, location, certifications, education, and other factors permitted by law. Decisions will be made on a case-by-case basis.) Benefits:<ul><li>Paid time off</li><li>Paid sick leave</li><li>401k retirement plan with a company match</li><li>Clean Air Commuter Program</li><li>Employee Assistance Program through CompPsych Guidance Resources.</li><li>Free access to 16,000+ online courses through LinkedIn Learning</li><li>Free Academy membership screenings</li><li>Free tickets and screenings at the Academy Museum</li><li>Employee discounts through LifeMart and Working Advantage</li></ul> To Apply: <ul><li>As part of your application, please submit a resume, cover letter, and a minimum of three professional references.</li></ul> @museumLI &nbsp; Position Requirements &nbsp; Full-Time/Part-Time Part-Time&nbsp; Position Conservation Technician&nbsp; Location Los Angeles &nbsp; About the Organization The Academy of Motion Picture Arts and Sciences is a global community of more than 10,000 of the most accomplished artists, filmmakers and executives working in film. In addition to celebrating and recognizing excellence in filmmaking through the Oscars, the Academy supports a wide range of initiatives to promote the art and science of the movies, including public programming, educational outreach and the Academy Museum of Motion Pictures. &nbsp; EOE Statement The Academy is committed to equal opportunity in employment and to creating and valuing diversity in its workforce. Maintaining a diverse workforce is important to the Academy. The Academy enforces a strict policy that prohibits discrimination in hiring, training, compensation, promotion, transfer, or termination, whether on the basis of race, color, national origin, religion, sex, disability, age, veteran status, sexual orientation or genetic information. This includes a workplace that is free of all forms of harassment. Also, to help foster diversity, the Academy uses programs that ensure fairness of opportunity, pay, and growth to all applicants and employees. Every employee of the Academy is required to follow this policy and to preserve the Academy’s commitment to diversity.&nbsp; This position is currently accepting applications. Apply Now

Academy Of Motion Picture Arts and Sciences

Academy Of Motion Pictures

Conservation Technician

Title On-Call, Events A/V Technician &nbsp; Description Department: Academy TheatersReports to: Director, Events A/VJob Type: Part-time – RegularJob Classification: Hourly (Non-exempt)Workplace Location: Los Angeles – Academy Museum, 8949 Wilshire, Pickford Center, andFairbanks Center Summary/Objective: The Events A/V Technician supports the technical operation and internal event production for non-exhibition audio/visual experiences across all Academy facilities.This role plays a key part in ensuring the successful delivery of internal and public-facing events through the setup, operation, and maintenance of lighting, audio, and video equipment. This is a part-time, on-call position averaging approximately 20 hours per week.Essential Functions of the Job:<ul><li>Serve as on-call technical support for Academy-wide events.</li><li>Deploy, operate, and wrap in-house lighting, audio, and video equipment.</li><li>Assist with hybrid and teleconferencing meetings.</li><li>Support live-streaming events.</li><li>Test and troubleshoot A/V equipment.</li><li>Follow all health and safety protocols put in place to ensure a secure and healthy work environment.</li><li>Perform other duties assigned by the Director, Events A/V.</li></ul> Required Competencies: <ul><li>A high school diploma or equivalent certificate of completion is required.</li><li>Access to timely and reliable transportation between Academy Campuses, often on short notice.</li><li>Minimum of 3 years of combined experience in theatrical lighting, technician, audio engineering, or teleconferencing support.</li><li>Strong knowledge of state-of-the-industry lighting, audio, live recording, and video equipment.</li><li>Demonstrated ability to operate theatrical lighting and digital audio consoles.</li><li>Ability to resolve minor technical issues as they arise with audio, microphones, and lighting consoles.</li><li>Excellent interpersonal and communication skills, with a strong customer service mindset.</li><li>A curiosity and willingness to learn.</li><li>Ability to work independently with limited supervision.</li><li>Demonstrated ability to problem solve and perform under pressure in fast-paced, high-volume environments.</li><li>A commitment to diversity, equity, accessibility, and inclusion.</li><li>Flexibility to work evenings, weekends, holidays, and short-notice events.</li></ul> Preferred Qualifications: <ul><li>Experience with Zoom/ Zoom Rooms is a plus.</li><li>Customer service experience at museums, theaters, or cultural attractions is a plus.</li></ul> Physical Requirements:<ul><li>Must be able to occasionally move A/V equipment weighing up to 30 pounds for various events and productions.</li><li>Must be able to remain in a stationary position for up to two hours.</li></ul> Required Vaccination: Full vaccination against COVID-19 is required, including any booster vaccinations as applicable. Exception:Medical and religious accommodations approved by the Office of People &amp; Culture. Compensation: The expected salary range for this role is $25.00 to $27.00 per hour. The actual base pay offered will be determined by factors such as experience, skills, training, location, certifications, education, and other factors permitted by law. Decisions will be made on a case-by-case basis. @museumLI&nbsp; Position Requirements &nbsp; Full-Time/Part-Time Part-Time&nbsp; Position On-Call, Events A/V Technician &nbsp; Location Los Angeles &nbsp; About the Organization The Academy of Motion Picture Arts and Sciences is a global community of more than 10,000 of the most accomplished artists, filmmakers and executives working in film. In addition to celebrating and recognizing excellence in filmmaking through the Oscars, the Academy supports a wide range of initiatives to promote the art and science of the movies, including public programming, educational outreach and the Academy Museum of Motion Pictures. &nbsp; EOE Statement The Academy is committed to equal opportunity in employment and to creating and valuing diversity in its workforce. Maintaining a diverse workforce is important to the Academy. The Academy enforces a strict policy that prohibits discrimination in hiring, training, compensation, promotion, transfer, or termination, whether on the basis of race, color, national origin, religion, sex, disability, age, veteran status, sexual orientation or genetic information. This includes a workplace that is free of all forms of harassment. Also, to help foster diversity, the Academy uses programs that ensure fairness of opportunity, pay, and growth to all applicants and employees. Every employee of the Academy is required to follow this policy and to preserve the Academy’s commitment to diversity.&nbsp; This position is currently accepting applications. Apply Now

On-Call, Events A/V Technician

ResponsibilitiesAbout Howmet AerospaceHowmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="http://www.howmet.com/esg-report" target="_blank">www.howmet.com/esg-report</a>. Follow:&nbsp;LinkedIn,&nbsp;Twitter,&nbsp;Instagram,&nbsp;Facebook, and&nbsp;YouTube.Howmet Fastening Systems (HFS) is seeking a&nbsp;Quality Technician II, Inspector&nbsp;at our Torrance, CA&nbsp;location.&nbsp;HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California.&nbsp; We hold the number one global position in aerospace fastening systems, and we’re the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.Job Duties and Responsibilities&nbsp;<ul> <li>Receives router with samples of parts and verifies correct paperwork, logs, lot number and quantity on daily log sheet.</li> <li>Inspects parts to process drawings, manufacturing drawings or customer drawings.</li> <li>Dimensionally inspects parts per print, examined visually for surface defects such as nicks, scratches, improper finishes or burrs.&nbsp; Then transfers router and completed parts to the outgoing area or placed in the test lab as applicable.&nbsp; Raw material used in part verified.&nbsp; If incorrect material used a rejection is written.</li> <li>Performs 1st article inspection using the process drawing to verify parts acceptability.</li> <li>Completes 1st article paperwork which includes notifying machine operator or supervisor of any non-conformance.</li> <li>Inspects parts by using 1" and 2" micrometers, veniers calipers, optical comparators, depth micrometers, concentricity drop indicators, microscope, bench center indicators, torque beam wrenches, digital torque testers, alloy type tester, rockwell hardness tester, thread and plug gauges, tri rolls, flat rolls, magna gauges, etc.</li> <li>Conducts in-process inspection and tests per CIRS (Compliance Inspection Requirement Sheets), if CIRS is not applicable, the process or manufacturing drawing is used to verify the parts compliance up to the point of completion. Inspection of all previous performed operations.</li> <li>Conducts final inspections and tests per customer drawing.</li> <li>Maintains CPI (Certified Production Inspection) and SPC (Statistical Process Control) in-house certifications.&nbsp; Performs CPI/SPC audits in the manner described by Certified Production Inspection Statistical Process Control Quality Control Procedure.</li> <li>Computes angles, radii, and other unspecified dimensions of work piece.</li> <li>Measures angular dimensions, radii, contours, clearances, thread lead, and other specifications.</li> <li>Tests units for fit of moving parts and mechanical functioning.</li> <li>Tests parts for hardness.</li> <li>Inspects, adjusts, and verifies accuracy of gauges and measuring instruments for conformance to specifications.</li> <li>Examines defective parts to determine cause of defect and recommends changes or modifications.</li> <li>Determines salvage ability of defective items.</li> <li>Measures surface finish of part.</li></ul>QualificationsBasic Qualifications<ul> <li>Minimum 3 years of quality inspection experience&nbsp;</li> <li>Employee must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant’s ability to lawfully obtain access to such items.</li></ul>Preferred Qualifications<ul> <li>High school diploma or general education degree (GED) preferred</li></ul>Benefits/Salary:The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation.&nbsp;Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location.&nbsp; The salary range for this position is $20.00-$26.00.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutHowmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

Howmet Aerospace

Quality Technician II, Inspector

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

U.S. Renal Care

Dialysis Patient Care Technician MWF

ResponsibilitiesAbout Howmet AerospaceHowmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow:&nbsp;<a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>,&nbsp;<a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>,&nbsp;<a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>,&nbsp;<a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and&nbsp;<a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>.Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.Howmet Fastening Systems (HFS) is seeking a 2nd Shift Machine Tech II&nbsp;in our&nbsp;Torrance, CA&nbsp;location. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California.&nbsp; We hold the number one global position in aerospace fastening systems, and we’re the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.Primary PurposeSets up, operates, and trouble shoots various secondary machines in all manufacturing departments.Major Activities<ul> <li>Proficiently sets up, operates, and trouble shoots machinery for self/others</li> <li>Sets up machines, according to work order set standard procedures and specialized company products and/or processes</li> <li>Learns the set up and operation of any new machines added to the departments to which assigned</li> <li>Assists factory supervision and lead person in the training of Machining Tech I and II</li> <li>Checks parts with standard gauges or precision measuring instruments and submits parts for inspection as required</li> <li>Operates machines to ensure proper functioning and releases to and instructs operator in procedures for producing parts in conformance with specifications</li> <li>Perform SPC Charting as required</li> <li>Keeps work area clean, safe, and in an orderly fashion on a daily basis</li> <li>Performs other tasks as required</li></ul>Essential Knowledge &amp; Skills<ul> <li>Certified in Lock Out/Tag Out&nbsp;</li> <li>Ability to read and interpret blueprints</li> <li>Must have good communication skills and know basic shop math&nbsp;</li> <li>Must be able to read, write and understand English</li> <li>Must be able to lift/move up to 30 lbs. (may not exceed per EHS Policies)</li></ul>QualificationsBasic Requirements:<ul> <li>High school diploma or general education degree (GED)&nbsp;preferred.</li> <li>Minimum 1 year experience in relevant machining experience.</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>Benefits/Salary:The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation.&nbsp;Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $19.00&nbsp;to $24.00.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutHowmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

2nd Shift Machining Technician II

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRONNeutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!ADDITIVE MANUFACTURING TECHNICIAN II/SENIOR - 2ND SHIFTBased onsite at Rocket Lab's global headquarters in Long Beach, California the Additive Manufacturing Technician is responsible for supporting various Additive technologies (LPBF, DED, Hybrid Solutions) with various alloys. This role will support all Additive processes involved with the Rutherford &amp; Archimedes engines. You will support the Manager of Additive Manufacturing and Production Additive Manufacturing organization, with deliverables required for internal leadership, board of directors, and investors.This opening is for 2nd shift Monday - Friday from 1pm-9:30pm PST. And can be hired on as a level I or level II.&nbsp;WHAT YOU'LL GET TO DO:<ul><li>Uphold and follow all Additive safety measures – be an advocate for safe operations.</li><li>Prepare additive print jobs for success through attention to detail on setups.</li><li>Operate a variety of metal 3D printers, experience with EOS, SLM, &amp; DMG preferred.</li><li>Identify and troubleshoot mechanical, optical laser, electrical, and build issues.</li><li>Conduct calibration of 3D Printers and interpret findings with Engineering.</li><li>Ensure conformance of part/build through independent inspection and print detail verification.</li><li>Follow work orders, procedures, specifications, and test instructions with attention to detail. Communicate any issues that are found.</li><li>Perform daily, weekly, and monthly preventative maintenance – as directed by Engineering.</li><li>Provide process improvement feedback and implement solutions in collaboration with Engineering.</li><li>Collaborate with Engineers on setup and fabrication of 3D prints and new hardware.</li><li>Kick off issue tickets based on process/product non-conformances.</li><li>Drive Additive Internal 5S system with actions promoting sustainability in the Additive Department.</li><li>Utilize measurement tools (micrometer, caliper, surface plate etc.) to ensure high quality inputs and outputs, including post-print inspection and post-processing inspection.</li></ul>QUALIFICATIONS YOU'LL BRING AS AN ADDITIVE MANUFACTURING TECHNICIAN II:<ul><li>5+ years of experience in a manufacturing, fabrication, assembly or testing environment.</li><li>Experience operating metal 3D printers.</li><li>High School diploma or GED.</li><li>Proficient in hand, power, and pneumatic tools such as drills, chisels, taps.</li><li>Proficient in inspection methods: surface plate, calipers, micrometers, height gauge.</li><li>Experience with operating machine tools: vertical mills, lathes, media blasters, cranes, or forklifts</li></ul>QUALIFICATIONS YOU'LL BRING AS A SENIOR ADDITIVE MANUFACTURING TECHNICIAN:<ul><li>8+ years of experience in a manufacturing, fabrication, assembly or testing environment.</li><li>Experience operating metal 3D printers</li><li>High School diploma or GED.</li><li>Proficient in hand, power, and pneumatic tools such as drills, chisels, taps.</li><li>Proficient in inspection methods: surface plate, calipers, micrometers, height gauge.</li><li>Experience with operating machine tools: vertical mills, lathes, media blasters, cranes, or forklifts</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>4+ years of experience with operating metal 3D printers and knowledge of associated hazards Experience with Additive Manufacturing (AM) principles.</li><li>Proficient with Microsoft Office.</li><li>Experience interpreting engineering drawings.</li><li>Experience using JIRA.</li></ul>ADDITIONAL REQUIREMENTS:<ul><li>Ability to work the following shift, Monday-Friday 1pm-9:30pm PST.&nbsp;</li><li>Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position&nbsp;</li><li>Able to lift up to 25lbs. unassisted&nbsp;</li><li>Must be able to climb ladders and be comfortable working in tight spaces.&nbsp;</li><li>Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls.&nbsp;</li><li>Must be able to walk or stand for extended periods – 8 hours min &nbsp;</li></ul>#RL1Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$30—$45 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Additive Manufacturing Technician II/Senior - 2nd Shift

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRON&nbsp;Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!&nbsp;PRECISION FINISHING TECHNICIAN II, DEBURR - 2ND SHIFT&nbsp;As a Precision Finishing Technician II, Deburr for Rocket Lab you will be deburring / finishing additive manufactured parts used to build Rutherford, an innovative electric turbo-pump rocket engine powering Rocket Labs Electron launch vehicle.&nbsp;YOU'LL BRING THESE QUALIFICATIONS:&nbsp;<ul><li>5+ years of experience in part finishing (machine, cast, forge, or print).&nbsp;</li><li>Attention to detail and time management skills.&nbsp;</li><li>High-level of manual dexterity skills and hand-eye coordination.&nbsp;</li><li>Able to maintain a clean, safe and efficient work area.&nbsp;</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:&nbsp;<ul><li>Experience with additive manufacturing or investment casting.&nbsp;</li><li>Experience with high strength steels and Inconel alloys.&nbsp;</li><li>Knowledgeable in part QA processes and dye penetrant testing.&nbsp;</li><li>Knowledgeable in TIG, Laser, and Electron beam welding.&nbsp;</li><li>Experience using microscopes and pencil grinders.&nbsp;</li></ul>ADDITIONAL REQUIREMENTS:&nbsp;&nbsp;&nbsp;<ul><li>Willing to work 2nd shift (Monday - Thursday 2:30pm-1:00am)&nbsp;</li><li>Ability to travel and communicate outside of work hours&nbsp;</li><li>Must be able to work extended hours and/or weekends as needed&nbsp;</li><li>Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position.&nbsp;&nbsp;</li><li>Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls.&nbsp;</li><li>Must be able to walk or stand for extended periods – 8 hours min  &nbsp;</li><li>Must be able to lift up to 25lbs. Unassisted.</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$25—$40 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Precision Finishing Technician II, Deburr - 2nd Shift

ResponsibilitiesHowmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow:&nbsp;<a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>,&nbsp;<a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>,&nbsp;<a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>,&nbsp;<a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and&nbsp;<a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>.Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.Howmet Fastening Systems (HFS) is seeking Quality Technician, Lab Tech in our Carson location.&nbsp;Quality Tech Lab – In Process LabDescription: Performs metallurgical and/or mechanical testing on manufactured products. Handles complex testing of manufactures product due to a broad understanding of test systems, and/or metallurgy. Must demonstrate successful completion of training Qualifications and examinations for NADCAP accreditation.Specific Responsibilities:&nbsp;&nbsp;<ul> <li>Performs complex or unusual tests as required for metallurgical evaluation. Uses and is proficient in the use of instrumentation and control systems, including static and dynamic strain measurement, temperature control and measurement, atmospheric effects, hardness machine, load cells, tensile, x-ray plating, hydrogen determinator, fatigue, stress rupture, etc.&nbsp;</li> <li>Troubleshoots faulty equipment and investigates suspect test data, such as conducting hardness and tensile strength correlation studies, etc.&nbsp;</li> <li>Performs all types of mechanical testing as required, including the calculating, conducting, and reporting of test results. Performs special testing procedures and programs as required, such as investigating/verifying customer returns. Makes recommendations to the Lab Supervisor on improving equipment and test techniques.&nbsp;</li> <li>Conducts a quarterly test fixture inventory and prepares orders for new tooling or replacement tooling as necessary.&nbsp;</li> <li>Provides technical guidance for laboratory technicians less familiar with equipment and procedures.&nbsp;</li> <li>Tests samples of manufactured products to verify conformity to specifications.&nbsp;</li> <li>Records test results on standardized forms and writes test reports describing procedures used.&nbsp;</li> <li>Calibrate and maintain all metallurgical/test equipment in test lab&nbsp;</li> <li>Assist with audit preparations if required&nbsp;</li></ul>Benefits/Salary:The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation.&nbsp;The salary range for this position is $21.00 to $29.19&nbsp;QualificationsBasic Qualifications:&nbsp;<ul> <li>Prior laboratory experience in mechanical and/or metallurgical testing OR mechanical and metallurgical laboratory training relating to mechanical and metallurgical testing&nbsp;</li> <li>High school diploma or GED preferred&nbsp;</li> <li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.&nbsp;</li> <li>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. ‘Green Card Holder’), Political Asylee, or Refugee.&nbsp;</li></ul>Preferred Qualifications&nbsp;<ul> <li>3 years of lab related testing experience.&nbsp;</li> <li>High School Diploma or GED equivalent preferred.&nbsp;</li></ul>About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

41 Technician Jobs in Lomita, CA, USA