field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

<h4>Production Technician</h4>Time type: full timePosted on: July 17, 2025Job requisition id: R5113What we needSymbotic is seeking a Production Technician; responsible for ensuring the processing of pallets into and out of automated and manual de-palletizing and automated palletizing cells in a mixed pallet distribution center.&nbsp;What we doThe Production Technician is part of the Customer Operations organization which is responsible for leading the day-to-day operations of Symbotic’srobotic material handling system. The Customer Operations organization drives operational excellence by engaging and partnering with our onsite customers to drive best-in-class quality, safetyand system performance. What you’ll do<ul><li>Ensure that the safety commitments in compliance with OSHA, Symbotic, and our customers’ processes and procedures are met daily.</li></ul><ul><li>Perform pre-production checks on automated adapters ensuring equipment is in ‘ready to run’ state.</li></ul><ul><li>Process and monitor the flow of the automated storage and retrieval system, through means of the adapters, including manual inbound, automatic inbound, automatic outbound, to achieve maximum throughput and cases per hour.</li></ul><ul><li>Prepare pallets for induction into the Symbotic storage and retrieval system.</li></ul><ul><li>Assess cause of system stoppage and return to service using Human/Machine Interface (HMI) and manual intervention.</li></ul><ul><li>Assist other team members in the operation of systems troubleshooting.</li></ul><ul><li>Analyze recurring faults and determinebest corrective action.</li></ul><ul><li>Communicate and escalate all issues impacting production immediately to operational leadership.</li></ul><ul><li>Contribute to overall system uptime through system preservation, robot recovery, suspect removal, and bot health actions.</li></ul><ul><li>Make recommendations for process/continuous improvement.</li></ul><ul><li>Perform periodic system inspections including: cleaning, lubrication, tolerance checking, component validation.</li></ul><ul><li>Report all out of spec conditions and perform root cause corrective action.</li></ul><ul><li>Maintain continuous operation of system components.</li></ul><ul><li>Monitor and utilize common radio etiquette while obtaining instructions from leadership and operational leads.</li></ul><ul><li>Perform rover bot upkeep to include, but not limited to, replacing wheels, cleaning, ESD brushes, sensors, etc.</li></ul><ul><li>Responsible for automated robotic vehicle recovery in the Symbotic Matrix select system to include working in restrictive environments.</li></ul><ul><li>Assist Automation technicians with breakdown calls and continuous system availability.</li></ul><ul><li>Perform basic duties of the Automation Technicians as needed.</li></ul><ul><li>Other duties as assigned by leadership.</li></ul>What you’ll need<ul><li>Demonstrates commitment and ability to work safely.</li></ul><ul><li>Reliable and maintains satisfactory attendance.</li></ul><ul><li>Produce quality work.</li></ul><ul><li>Ability to maintain required productivity/work expectations.</li></ul><ul><li>Be proficient in performing all System Inspection functions including: cleaning, lubrication, tolerance checking, current measurements, and checking electrical systems.</li></ul><ul><li>Ability to prioritize work to gain maximum uptime and throughput from an automated cell.</li></ul><ul><li>Ability to analyze stoppages and resolve/escalate accordingly.</li></ul><ul><li>Ability to work with limited supervision following system procedures and manuals.</li></ul><ul><li>A high sense of urgency.</li></ul><ul><li>Takes critical feedback and recognition positively.</li></ul><ul><li>Ability to Multi-task and perform multiple job functions at once.</li></ul><ul><li>Must be literate, written and verbal, in English Language.</li></ul>OurEnvironment<ul><li>Approximately 75% of time will be spent on a construction site with PPE required (hard hat, safety vest, steel toes, eyeglasses, ear protection, fall protection (e.g., safety harness).</li></ul><ul><li>There will be steep stairs to climb into the structure. You may be required to routinely walk up and down stairs to navigate the automation structure.</li></ul><ul><li>You will regularly be near railings that are high off the ground.</li></ul><ul><li>Subject to environmental conditions, protection from weather conditions but not necessarily temperature changes. Must be capable of working in temperatures ranging from 105° to 32° Fahrenheit.</li></ul><ul><li>Frequent ability to safely and efficiently lift items weighing up to 50lbs and move items weighing up to 80lbs.</li></ul><ul><li>Stand/walk for up to 10-12 hours and is frequentlyrequired to walk and reach with hands and arms.</li></ul><ul><li>The employee is routinely required to work at heights of up to 45 feet and within restrictive areas of 24 inches. Where you may needto be able to stand, climb, balance, stoop, kneel, crouch, or crawl.</li></ul><ul><li>Must be capable of occasional and/or continuous feeling, seeing, hearing, bending, twisting, stooping, pushing, pulling, balancing, gripping, climbing, crawling, sitting, handling objects, and repetitive movement using both hands and feet. Must comply with all safety requirements and protocols, including without limitation Lock out tag out safety protocols and fall protection safety protocols.</li></ul>The base for this position in Tolleson AZ is $20.00 per hour; however, base pay offered may vary depending on job-related knowledge, skills, and experience. The compensation package includes medical, dental, vision, disability, 401K, PTO and/or other benefits.&nbsp;&nbsp;#LI-BB1#LI-Onsite Apply Now

Symbotic

Production Technician

Welcome to Whataburger Careers!Have you heard? Whataburger is growing fast, and we need Restaurant Maintenance Technicians to grow with us! What started in Texas now spans across 17 states, with more to come. We are built on 75 years of history, a culture of pride, care, love and are committed to innovation in customer and employee experience. Our roadmap includes building Restaurant Maintenance Technician talent pipelines to support our growth. If you are ready to support Goodness 24/7, we want to get to know you! This position diagnoses service issues, replaces or repairs parts, and makes adjustments to commercial kitchen equipment, HVAC and refrigeration equipment, and building interior and exterior components in assigned Whataburger restaurants. Performs preventative maintenance on equipment to ensure safe, efficient, and reliable equipment operation. Applies judgement, knowledge, and skill when restoring equipment and facilities to proper operation. Ensures timely and accurate completion of work orders. Works with and adapts to new or changing technology to effectively manage work orders. Maintains proper part inventory on company truck to ensure ability to make effective and efficient repairs. Maintains a clean and orderly work area to include company truck cleanliness and maintenance.Total Rewards:<ul><li>5 weeks PTO on Day 1</li><li>Dependable full-time Monday- Friday schedule with on-call rotation. Averaging 7 days per month.</li><li>Competitive Medical, Dental, Vision, Life Insurance, 401k, Wellness Rewards, Employee Assistance Program, Employee discounts</li><li>Flex Medical/Dependent Care Spending plan</li><li>Company vehicle (take home for both work and personal use) with a company paid toll-management system</li><li>Company gas card</li><li>Tablet and Phone provided</li><li>Annual Performance Bonus with no cap</li><li>11 PAID Holidays per year in addition to PTO</li><li>Ongoing skills training</li><li>Scholarship Program (Available for yourself or your dependents!)</li><li>Whataburger Family Foundation (Hardship Grant Assistance)</li><li>Career Advancement Opportunities</li><li>Discounted meals and so much more!</li></ul>Responsibilities: <ul><li>Troubleshoots, repairs, and maintains all Whataburger equipment, including heating, ventilation, and air conditioning (HVAC), cooking and beverage equipment and refrigerators.</li><li>Communicates continuously and effectively with Maintenance Services Company (MSC) and restaurant leadership.</li><li>Installs equipment in accordance with company safety procedures and follows safety protocols. Resolves electrical/mechanical problems; and informs appropriate management of potential inherent dangers with equipment.</li><li>Responsible for restaurant interior and exterior maintenance to include basic carpentry and plumbing repairs and intermediate electrical repairs.</li><li>Performs and documents quality repairs that meet the work order priority and customer Service Level Agreement (SLA).</li><li>Keeps management advised on status of repair work, schedule and budget for capital expenditure projects in the assigned zone.</li><li>Partners with the Zone Lead Technician and Zone Regional Facilities Manager to ensure all service work orders are successfully executed.</li><li>Provides support to the operation of Whataburger restaurants 24/7 and keeps the facilities up to the Facilities Brand Standard.&nbsp;</li><li>Evaluates and outsources work when cost and schedule effective. Reviews and approves work completed by 3rd party vendors. Acts as liaison between vendor and restaurant management.</li><li>Reduces costs associated with equipment repairs by proactively planning and organizing assigned work orders.</li><li>Assists with implementing changes to restaurant procedures and equipment intended to improve productivity, customer service and profitability.</li><li>Complies with all national, state, and local regulatory requirements.</li><li>Assumes additional responsibilities as assigned.</li></ul>Education:<ul><li>High school diploma/GED equivalent or equivalent work experience</li><li>College hours in technical-related courses (preferred)</li><li>High school diploma/GED equivalent or equivalent work experience</li></ul>Experience:<ul><li>1+ years’ field experience in the HVAC and commercial refrigeration (required)</li><li>1+ years’ work experience in commercial kitchen equipment repair or educational equivalent (required)</li><li>1+ years’ experience in the trade and carpentry fields (preferred)</li><li>1+ years’ experience in restaurant industry (preferred)</li></ul>Knowledge:<ul><li>Strong refrigeration &amp; HVAC knowledge / skills</li><li>Strong commercial kitchen equipment knowledge / skills</li><li>Basic carpentry, plumbing, and intermediate electrical knowledge / skills</li><li>Ability to troubleshoot and correct difficult and complex service issues</li><li>Demonstrated ability to communicate well with the general public and experience in establishing and maintaining an effective working relationship with management, vendors, and co-workers</li><li>Demonstrated ability to work independently and within a team environment</li></ul>Professional Certification:<ul><li>Environmental Protection Agency (EPA) Certification or CFC Certification (required)</li><li>HVAC State Certified License (preferred)</li><li>State-licensed Mechanical Contractor or Journeyman’s license preferred (required in Oklahoma)</li><li>Commercial Food Equipment Service Association (CFESA) Certification (preferred)</li></ul>Working Conditions/Travel Requirements:<ul><li>Expected to work the necessary time to satisfactorily fulfill job responsibilities</li><li>Must be able to report to work timely and as required by operational/business needs</li><li>Must be able to work a full-time schedule and work outside of normal business hours when necessary</li><li>Must be able to travel both locally and long distances (including air travel), to worksites, meeting sites, and other locations</li><li>Must possess a valid driver’s license, submit to releasing a Motor Vehicle Record that adheres to the Whataburger standards and maintain current automobile liability at minimum levels in their state of residence</li></ul>4610 S 48Th St Phoenix AZ 85040-8814

Whataburger

Restaurant Kitchen Equipment Service Technician - Phoenix, AZ

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.Pay Range$34,700.00-$47,700.00 AnnualThis is the base salary pay range that an applicant can expect to make upon hire. &nbsp; Pay within this range will vary based upon relevant experience, skills, and education among other factors. In addition, this position is eligible for an incentive bonus.&nbsp;Metal Manufacturing Technician IPosition Overview: The Metal Manufacturing Technician I will assist in the manufacturing process by operating machinery, assembling products, and ensuring quality standards are met. This entry-level position is ideal for individuals looking to start their career in manufacturing and gain valuable hands-on experience.&nbsp;The Metal Manufacturing Technician I will work under the supervision of senior level employees and supervisors to ensure that production goals are met while adhering to company policies and procedures.Day Shift: T-F: 6a-4pCore Competencies:Health, Safety and Environmental<ul><li>Selection and Use of PPE: Proper selection and use of plant PPE and task-specific PPE.</li><li>Safety: Maintain safe work habits, recognize hazards, and ensure hand safety.</li><li>Hazardous Communication: Understand and follow hazardous communication protocols and grinding safety.</li><li>Control of Hazardous Energy (LOTO): Implement lockout/tagout procedures to control hazardous energy.</li><li>Mobile and Powered Equipment Operation: Safely operate forklifts and powered pallet jacks.</li><li>Crane Operations: Perform crane pre-use inspections, operation, and rigging.</li><li>Machine Guarding: Ensure machine guarding and E-Stop awareness/operation.</li><li>Policy Adherence: Follow JM Life Critical Policies.</li><li>Waste Management: Manage waste streams including scrap metal and environmental considerations.</li><li>JSA: Comprehend and sign off on Job Safety Analysis (JSA).</li><li>Housekeeping: Maintain cleanliness and organization in the work area.</li></ul>Computer/Data Entry<ul><li>Computer Skills: Basic computer skills including Microsoft O365 applications(Outlook, SharePoint, Excel, Word).</li><li>Reporting Systems: Perform quality control inspections of parts on the machine and report any deficiencies via applicable quality reporting systems.</li><li>Data Entry: Document work orders(via SAP ERP system) and other documentation required for quality control.&nbsp;&nbsp;&nbsp;</li><li>SOPs: Locate and use Standard Operating Procedures (SOPs) via computer based library system (SharePoint).</li><li>Training:&nbsp; Ability to navigate and utilize various computer based training (CBT) for safety and compliance.</li></ul>General Industry <ul><li>Tool Use: Use common hand and power tools effectively.&nbsp; Examples would be drills, grinders, deburring tools, surface grinder, etc.</li><li>Measuring: Ability to use precision measuring tools such as tape measures, scales, micrometers, and calipers to perform dimensional tolerancing of parts.</li><li>Shop Math: Apply basic shop math including measurements, geometry, volume, and area.</li><li>Blueprint Interpretation: Interpret blueprints and understand entry-level GD&amp;T.</li><li>Tolerances:&nbsp;&nbsp; Demonstrate ability to hold defined tolerances during assigned tasks.</li></ul>Job/Trade Specific <ul><li>Equipment Maintenance:&nbsp; Demonstrate ability to complete operator based maintenance task such as cleaning, lubrication, wearable tooling changes, etc. to ensure the highest level of equipment uptime.</li></ul>Department Specific Requirements<ul><li>Alloy<ul><li>Inventory Control:&nbsp; Demonstrate ability to control assigned materials and account for them throughout the manufacturing process.</li><li>Inspection:&nbsp; Demonstrate ability to recognize product defects during the manufacturing process.&nbsp;&nbsp; This includes the ability to make adjustments to process as needed to reduce defects.</li><li>Used Product Process:&nbsp; &nbsp;&nbsp;Demonstrate proficiency in all aspects of the used bushing process.&nbsp; See skills matrix for detailed requirements.</li><li>Wire Processing: :&nbsp; &nbsp;&nbsp;Demonstrate proficiency in all aspects of the wire processing.&nbsp; See skills matrix for detailed requirements.</li><li>Mounting/Shipping: :&nbsp; &nbsp;&nbsp;Demonstrate proficiency in all aspects of the mounting and shipping process.&nbsp;&nbsp; See skills matrix for detailed requirements.</li><li>Proficiency:&nbsp; See Alloy Department Skills Matrix for requirements for task specific activities.</li></ul></li></ul>Minimal Qualifications:<ul><li>High school diploma or equivalent.</li><li>Basic understanding of CNC machinery and operations.</li><li>Ability to read and interpret blueprints and technical drawings.</li><li>Strong attention to detail and commitment to quality.</li><li>Good communication and teamwork skills.</li><li>Willingness to learn and follow safety protocols.</li><li>In addition to the competencies mentioned above, there is no minimum requirement for manufacturing or operational experience.</li></ul>Preferred Qualifications:<ul><li>Associate degree or certificate in industrial trades or similar program from an accredited institution.</li><li>In addition to the competencies mentioned above an ideal candidate would have 1+ years of manufacturing experience or a closely related field.</li></ul>Physical Requirements:<ul><li>Ability to lift and move materials up to 50 pounds.</li><li>Standing for extended periods.</li><li>Manual dexterity and hand-eye coordination.</li></ul>Work Environment:<ul><li>Manufacturing plant with exposure to noise, dust, and machinery.</li><li>Use of personal protective equipment (PPE) as required.</li></ul>Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Johns Manville supports employee growth with vast educational opportunities and a company-wide mentoring program. This program pairs employees and leaders to grow skills, build stronger internal networks and strengthen the company’s succession planning process.&nbsp;Johns Manville also offers soft and hard skills training facilitated by internal and external presenters. Our talent management team prioritizes the holistic growth of our workforce.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Johns Manville

Metal Manufacturing Technician - Day Shift

JOB CLASSIFICATION SUMMARYJob Classification Title: M&amp;O Maintenance Technician IIWorking Title(s): Maintenance Technician- StreetsWho we areThe City of Tolleson is known for its strong sense of community, preserving neighborhood character and livability amid regional growth. Despite our small size, we compete in economic and community development, workforce recruitment, and retention, guided by our Vision Statement that balances community values with future growth. As the first Certified Autism Center in the West Valley, we are committed to inclusivity and fostering social connections, creating a welcoming environment for all. Join us in building a diverse workforce that honors our past and shapes a vibrant future.Position DescriptionThe City of Tolleson is seeking qualified individuals interested in joining our team as Maintenance Technician II- Streets. The Maintenance Technician II – Streets position is responsible for performing semi-skilled to skilled repairs and maintenance on public right-of-way infrastructure. Duties include inspecting, troubleshooting, and diagnosing issues to determine the appropriate repairs and preventative maintenance needed. The technician will operate specialized and heavy equipment; maintain and repair City streets, sidewalks, signage, easements, alley ways, and related property; and document all work performed in logs, reports, and records. This role also involves prioritizing work orders and setting up traffic control signs and barricades to ensure the safety of both workers and citizens; and performs related work as assigned. QualificationsHigh School Diploma or GED and as assigned, two (2) years of work experience; or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job such as those listed above. A valid Class A or B CDL with applicable endorsements, including Airbrake, is required at time of hire. A candidate with three (3) years experience in a related field, along with a Traffic Control Certification (TCT or TCS) and a Pesticide Applicator Certification is highly desired. &gt;&gt;&gt; Click on Full Job Description for additional position details.Physical DemandsPositions in this class typically require: climbing, balancing, stooping, kneeling, crouching, crawling, reaching, standing, walking, pushing, pulling, lifting, fingering, grasping, feeling, talking, hearing, seeing and repetitive motions.Heavy Work: Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of forces constantly to move objects.Incumbents may be subjected to moving mechanical parts, electrical currents, vibrations, fumes, odors, dusts, gases, poor ventilation, chemicals, oils, extreme temperatures, and intense noises.Job InformationClosing Date: Open until filled Hiring Salary: $24.86 - $26.50 Hourly D.O.E.Applications reviewed weekly, with first review July 10, 2025.Full Salary Range for position Salary: $24.86 - $34.80 HourlyAdditional Application InformationIt is important that your application shows all relevant work experience and education. Work experience must be noted on the application. Applicants may be rejected if not fully complete. Your resume may not be substituted as an application. Applicants may request a reasonable accommodation, if needed, by contacting Human Resources at 623-936-7111.EOE/M/F/D/V/SO

City of Tolleson

Maintenance Technician II - Streets

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

U.S. Renal Care

Dialysis Patient Care Technician

<h4>Lead Production Technician</h4>Time type: full timePosted on: June 24, 2025Job requisition id: R5018What we needAs a Lead Production Technician, you will be responsible for system upkeep and operations of automated adapters used to interface with the Symbotic structure. You will be responsible forassisting with system readiness to achieve performance targets as defined by leadership. You will also be responsible forutilizing Human/Machine Interface terminals to effectively operate equipment.What we doThe&nbsp; LeadProduction Technician is part of the Customer Operations organization which is responsible for leading the day-to-day operations of Symbotic’s robotic material handling system. The Customer Operations organization drives operational excellence by engaging and partnering with our onsite customers to drive best-in-class quality, safety and system performance.  What you’ll do<ul><li>Ensure that the safety commitments in compliance with OSHA, Symbotic, and our customers’ processes and procedures are met daily.</li></ul><ul><li>Help lead the team of production technician with direction from site leadership.</li></ul><ul><li>Perform pre-production checks on automated adapters ensuring equipment is in ‘ready to run’ state.</li></ul><ul><li>Process and monitor the flow of the automated storage and retrieval system, through means of the adapters, including manual inbound, automatic inbound, automatic outbound, to achieve maximum throughput and cases per hour.</li></ul><ul><li>Prepare pallets for induction into the Symbotic storage and retrieval system.</li></ul><ul><li>Assess cause of system stoppage and return to service using Human/Machine Interface (HMI) and manual intervention.</li></ul><ul><li>Assist other team members in the operation of systems troubleshooting.</li></ul><ul><li>Analyze recurring faults and determinebest corrective action.</li></ul><ul><li>Communicate and escalate all issues impacting production immediately to operational leadership.</li></ul><ul><li>Contribute to overall system uptime through system preservation, robot recovery, suspect removal, and bot health actions.</li></ul><ul><li>Make recommendations for process/continuous improvement.</li></ul><ul><li>Perform periodic system inspections including: cleaning, lubrication, tolerance checking, component validation.</li></ul><ul><li>Report all out of spec conditions and perform root cause corrective action.</li></ul><ul><li>Maintain continuous operation of system components.</li></ul><ul><li>Monitor and utilize common radio etiquette while obtaining instructions from leadership and operational leads.</li></ul><ul><li>Perform rover bot upkeep to include, but not limited to, replacing wheels, cleaning, ESD brushes, sensors, etc.</li></ul><ul><li>Responsible for automated robotic vehicle recovery in the Symbotic Matrix select system to include working in restrictive environments.</li></ul><ul><li>Assist Automation technicians with breakdown calls and continuous system availability.</li></ul><ul><li>Perform basic duties of the Automation Technicians as needed.</li></ul><ul><li>Other duties as assigned by leadership.</li></ul>What you’ll need<ul><li>Demonstrates commitment and ability to work safely.</li></ul><ul><li>Reliable and maintains satisfactory attendance.</li></ul><ul><li>Produce quality work.</li></ul><ul><li>Ability to maintain required productivity/work expectations.</li></ul><ul><li>Be proficient in performing all System Inspection functions including: cleaning, lubrication, tolerance checking, current measurements, and checking electrical systems.</li></ul><ul><li>Ability to prioritize work to gain maximum uptime and throughput from an automated cell.</li></ul><ul><li>Ability to analyze stoppages and resolve/escalate accordingly.</li></ul><ul><li>Ability to work with limited supervision following system procedures and manuals.</li></ul><ul><li>A high sense of urgency.</li></ul><ul><li>Takes critical feedback and recognition positively.</li></ul><ul><li>Ability to Multi-task and perform multiple job functions at once.</li></ul><ul><li>Must be literate, written and verbal, in English Language.</li></ul>Our Environment<ul><li>Approximately 75% of time will be spent on a construction site with PPE required (hard hat, safety vest, steel toes, eyeglasses, ear protection, fall protection (e.g., safety harness)&nbsp;</li></ul><ul><li>There will be steep stairs to climb into the structure. You may be required to routinely walk up and down stairs to navigate the automation structure.</li></ul><ul><li>You will regularly be near railings that are high off the ground&nbsp;</li></ul><ul><li>Subject to environmental conditions, protection from weather conditions but not necessarily temperature changes. Must be capable of working in temperatures ranging from 105° to 32° Fahrenheit.</li></ul><ul><li>Frequent ability to safely and efficiently lift items weighing up to 50lbs and move items weighing up to 80lbs.</li></ul><ul><li>Stand/walk for up to 10-12 hours and is frequentlyrequired to walk and reach with hands and arms&nbsp;</li></ul><ul><li>The employee is routinely required to work at heights of up to 45 feet and within restrictive areas of 24 inches. Where you may need to be able to stand, climb, balance, stoop, kneel, crouch, or crawl.</li></ul><ul><li>Must be capable of occasional and/or continuous feeling, seeing, hearing, bending, twisting, stooping, pushing, pulling, balancing, gripping, climbing, crawling, sitting, handling objects, and repetitive movement using both hands and feet. Must comply with all safety requirements and protocols, including without limitation Lock out tag out safety protocols and fall protection safety protocols</li></ul>#LI-BB1#LI-Onsite Apply Now

Lead Production Technician

ResponsibilitiesAbout Howmet Aerospace:&nbsp;Howmet Aerospace has an opening for a Maintenance Electrical Technician 2nd Shift in our Tucson, AZ location.&nbsp;Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow:&nbsp;<a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>,&nbsp;<a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>,&nbsp;<a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>,&nbsp;<a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and&nbsp;<a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>.Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.2nd Shift schedule: Monday - Friday; 2:00PM - 10:30PMSummary:The Maintenance Electrical Technician is responsible for performing electrical work, maintenance and repair of all production and facility equipment in a manufacturing facility.&nbsp;Responsibilities include the production of banded parts meeting print and specification requirements, the care and maintenance of the equipment, interface with subcontractors in the repair of production and facility equipment. The assurance of safe and healthful workplace and a commitment to employee involvement, participative management, and continuous improvement. .<ul> <li>Trade certificate in electrical machine/ facility maintenance and repair, including machining, motor controls.&nbsp; Equivalent experience may be substituted.</li> <li>Familiar with the function and operation of a variety of manufacturing equipment and processes (i.e. heading, rolling, drilling, heat treat, plating, band annealing, assembly and facility support.)</li> <li>Ability to read equipment, component and wiring drawings and schematics.</li> <li>Familiar with Hydraulics and Pneumatics</li> <li>Familiar with VFD’s, sensors, PLC’s, controls, bus duct and bus ducts boxes</li> <li>Ability to install, troubleshoot, and repair 480V, 240V, 120V, 24VDC, &amp; 5VDC</li> <li>Familiar with driving a forklift and scissor lift&nbsp;</li> <li>Familiar with MS Office suite</li> <li>Team Player</li> <li>Takes initiative and follows directions&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li> <li>Knowledge of occupational hazards and safety precautions of the trades involved</li></ul>Qualifications<ul> <li>Minimum of five years’ experience in a manufacturing environment performing machine maintenance and repair</li> <li>Preferred&nbsp; <ul> <li>Ability to install electrical conduit, wiring, switching devices, controls, outlets, fixtures, motors, and other such equipment</li> <li>Fabrication experience&nbsp;</li> <li>Welding, HVAC, Plumbing and PLC experience a plus</li> </ul></li></ul>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. &nbsp;ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.This position will physically require the incumbent to perform duties standing, walking, overhead reaching, lifting (35 – 40lbs), pushing and pulling totes, and leaning over machines, all equally on a regular basis.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

Maintenance Electrical Technician 2nd Shift

USRC's greatest strength in being a leader in the dialysis industry is our ability to recognize and celebrate the differences in our diverse workforce. We strongly believe in recruiting top talent and creating a diverse and inclusive work climate and culture at all levels of our organization.&nbsp;The Biomedical Technician is responsible for overseeing the overall operational condition, maintenance and repair of all water treatment equipment, all medical equipment and mechanical/electrical systems to ensure patient safety and the safety of all staff operating such equipment for their assigned clinic(s).ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.&nbsp; Other duties and tasks may be assigned.&nbsp;<ul><li>Demonstrate effective use of supplies and staff labor hours.</li><li>Assist with purchasing as needed: place orders, perform weekly and month end inventory counts.</li><li>Be familiar with the overall procedures used in Inventory Control (FIFO) and assist in the documentation and control of excess inventory.</li><li>Perform duties as assigned to meet the patient care or operational needs of the clinic.</li><li>Troubleshoot, repair and maintain equipment as recommended by the manufacturer.</li><li>Repair, calibrate, test, clean and disinfect dialysis machines, water distribution loop and RO's according to protocol.</li><li>Perform water quality checks to include but not limited to: free chlorine, total chlorine, and water hardness testing.</li><li>Perform safety checks and tests on all pretreatment water equipment including but not limited to carbon tanks, water softeners, RO units, UV lamps and ultrafilters.</li><li>Collect samples of RO water and dialysate for microbiology testing according to protocol.</li><li>Collect water samples for AAMI analysis testing according to protocol.</li><li>Disinfection of central bicarbonate system and mixing tank according to protocol.</li><li>Disinfection of RO, distribution system, and hemodialysis machines according to protocol.</li><li>Perform duties at all times within limitations established by and in accordance with company policy and procedures, applicable state and federal laws and regulations.</li><li>Perform electrical safety on dialysis machines and related equipment.</li><li>Be familiar with instruction manuals and operation for equipment in accordance with manufacturer's recommendations. Be capable of starting up and shutting down facility's equipment if necessary.</li><li>Maintain established preventative maintenance programs and required support documentation.</li><li>Maintain accurate maintenance records for the facility's equipment.</li><li>Have knowledge of the function and safe operation of water treatment equipment and related mechanical and electrical systems.</li><li>Address physical environment issues which could impact patient and staff safety.</li><li>Mix bicarbonate solution according to protocol. Mix acid concentrate solution according to protocol.</li><li>Assist in receiving, storing and stocking of supplies.</li><li>Be familiar with all emergency equipment and emergency operational procedures.</li><li>Use appropriate safety measures including personal protective equipment as necessary.</li><li>Be familiar with OSHA regulations.</li><li>Update Material Safety Data Sheets (MSDS) as required.</li><li>Be aware of all contracts and contacts necessary for the emergency repair of the clinic's equipment and mechanical systems.</li><li>Obtain quotes from reputable and approved contractors as needed to address physical environment issues.</li><li>Present technical summaries in QAPI meetings.</li><li>Maintain collaborative working relationship with Administrator(s). Partner with Administrator(s) to ensure clinic needs are met.</li><li>Actively promote GUEST customer service standards; develop effective relationships at all levels of the organization.</li><li>Respond effectively to inquiries or concerns.</li><li>Participate in staff meetings as required. Attend in-service and continuing education offerings in compliance with company policy and procedure.</li><li>Complete initial and annual technical training on clinical staff as required.</li><li>Instruct staff in use and care of equipment and answer questions.</li><li>Participate in team concepts and promote a team effort.</li></ul>

Dialysis Biomedical Technician

<h4>Automation Maintenance Technician (All Levels)</h4>Time type: full timePosted on: March 31, 2025Job requisition id: R4709What we needSymbotic is seeking an Automation MaintenanceTechnician at all levels. As a Maintenance Technician you will be responsible forrepairing and calibrating our automated and robotic systems. These systems are Symbotic’sautomated adapters, vertical lifts, and Symbotic’s fleet of automated robotic vehicles.&nbsp;You will be responsible for system upkeep and operations of automated adapters used to interface with the Symbotic structure.As the Maintenance Technician you will become the system expert including all mechanical, PLC, electrical or electronic subsystems.What we do&nbsp;Our Automation Maintenance Technician team is part of the Customer Operations organization which is responsible for leading the day-to-day operations of Symbotic’s robotic material handling system. The Customer Operations organization drives operational excellence by engaging and partnering with our onsite customers to drive best-in-class quality, safety and system performance.What you’ll do<ul><li>Perform inspections on systems associated with Automated Storage and Retrieval System of automated robotic vehicles and Automated Adapters/ Lifts.</li></ul><ul><li>Lead continuous operation by adjusting, calibrating, repairing, replacing or modifying system components.</li></ul><ul><li>Process and monitor the flow of the automated storage and retrieval system, through means of the adapters, including manual inbound, automatic inbound, automatic outbound, to achieve maximum throughput and cases per hour.</li></ul><ul><li>Troubleshoot automated robotic vehicle anomalies and stoppages using schematic and wiring diagrams as well as advanced test equipment.</li></ul><ul><li>Perform periodic system inspections within expected durations on all equipment and thoroughly document all actions and repairs to include parts used and labor. Ensure quality maintenance and complete documentation via the Computerized Maintenance Management System (CMMS).</li></ul><ul><li>Effective communication of production impacting problems and suggested actions, including approximate time required for corrective and emergency maintenance to required team members.</li></ul><ul><li>Must be able to work in a dynamic environment and change course based on immediate business needs.</li></ul><ul><li>Cleanup of equipment and removal of replaced parts from work areas after repairs are completed.</li></ul><ul><li>Responsible for automated robotic vehicle recovery in the Symbotic Matrix select system to include working in restrictive environments.</li></ul><ul><li>Responsible for minor utility work such as machining holes, brackets; cutting steel; aligning sensors; attaching Unistrut; etc.).</li></ul><ul><li>Responsible for troubleshooting, calibration, set up, and tool changes on Robotic arms.</li></ul><ul><li>Responsible for continuous cleaning and adhering to 5S policies.</li></ul><ul><li>Perform Cell Operator functions as needed.</li></ul><ul><li>Other duties as assigned by leadership.</li></ul>What you’ll need&nbsp;<ul><li>Associate degree and/or certification in electronics, automotive, automation, manufacturing or equivalent work experience preferred.&nbsp;</li></ul><ul><li>A minimum of 3 years of experience with mechanical automation systems or educational/training equivalent</li></ul><ul><li>Manage and lead advanced troubleshooting skills and ability to follow electro-mechanical diagrams.</li></ul><ul><li>Must be able to operate and run Automated systems</li></ul><ul><li>Experience with PLC (Programmable Logic Controller) knowledge and troubleshooting.</li></ul><ul><li>Advanced troubleshooting skills and ability to follow electro-mechanical diagrams.</li></ul><ul><li>Proficient in performing all Inspection functions.</li></ul><ul><li>Ability to work independently of supervisor following procedures and manuals.</li></ul>Our Environment&nbsp;<ul><li>There will be steep stairs to climb into the structure.&nbsp;&nbsp;</li></ul><ul><li>You will regularly be near railings that are high off the ground.&nbsp;&nbsp;</li></ul><ul><li>Subject to environmental conditions, protection from weather conditions but not necessarily temperature changes. Must be capable of working in temperatures ranging from 105° to 32° Fahrenheit.&nbsp;&nbsp;</li></ul><ul><li>If the site location is in construction, you will be required to wear proper PPE (hard hat, safety vest, steel toes, eyeglasses, ear protection, fall protection (e.g., safety harness).</li></ul><ul><li>Frequent ability to safely and efficiently lift items weighing up to 50lbs and move items weighing up to 80lbs.&nbsp;</li></ul><ul><li>Stand/walk for up to 10-12 hours and is frequentlyrequired to walk and reach with hands and arms.&nbsp;&nbsp;</li></ul><ul><li>The employee is routinely required to work at heights of up to 45 feet and within restrictive areas of 24 inches. to stand; climb or balance and stoop, kneel, crouch, or crawl.&nbsp;&nbsp;</li></ul><ul><li>Must be capable of occasional and/or continuous feeling, seeing, hearing, bending, twisting, stooping, pushing, pulling, balancing, gripping, climbing, crawling, sitting, handling objects, and repetitive movement using both hands and feet. Must comply with all safety requirements and protocols, including without limitation Lock out tag out safety protocols and fall protection safety protocols.&nbsp;</li></ul>The base range for this position in Tolleson, AZ is $22.00 - 24.00 per hour; however, base pay offered may vary depending on job-related knowledge, skills, and experience. The compensation package includes medical, dental, vision, disability, 401K, PTO and/or other benefits.&nbsp;#LI-BB1#LI-Onsite Apply Now

38 Technician Jobs in Arizona