field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

USRC's greatest strength in being a leader in the dialysis industry is our ability to recognize and celebrate the differences in our diverse workforce. We strongly believe in recruiting top talent and creating a diverse and inclusive work climate and culture at all levels of our organization.&nbsp;The Biomedical Technician is responsible for overseeing the overall operational condition, maintenance and repair of all water treatment equipment, all medical equipment and mechanical/electrical systems to ensure patient safety and the safety of all staff operating such equipment for their assigned clinic(s).ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.&nbsp; Other duties and tasks may be assigned.&nbsp;<ul><li>Demonstrate effective use of supplies and staff labor hours.</li><li>Assist with purchasing as needed: place orders, perform weekly and month end inventory counts.</li><li>Be familiar with the overall procedures used in Inventory Control (FIFO) and assist in the documentation and control of excess inventory.</li><li>Perform duties as assigned to meet the patient care or operational needs of the clinic.</li><li>Troubleshoot, repair and maintain equipment as recommended by the manufacturer.</li><li>Repair, calibrate, test, clean and disinfect dialysis machines, water distribution loop and RO's according to protocol.</li><li>Perform water quality checks to include but not limited to: free chlorine, total chlorine, and water hardness testing.</li><li>Perform safety checks and tests on all pretreatment water equipment including but not limited to carbon tanks, water softeners, RO units, UV lamps and ultrafilters.</li><li>Collect samples of RO water and dialysate for microbiology testing according to protocol.</li><li>Collect water samples for AAMI analysis testing according to protocol.</li><li>Disinfection of central bicarbonate system and mixing tank according to protocol.</li><li>Disinfection of RO, distribution system, and hemodialysis machines according to protocol.</li><li>Perform duties at all times within limitations established by and in accordance with company policy and procedures, applicable state and federal laws and regulations.</li><li>Perform electrical safety on dialysis machines and related equipment.</li><li>Be familiar with instruction manuals and operation for equipment in accordance with manufacturer's recommendations. Be capable of starting up and shutting down facility's equipment if necessary.</li><li>Maintain established preventative maintenance programs and required support documentation.</li><li>Maintain accurate maintenance records for the facility's equipment.</li><li>Have knowledge of the function and safe operation of water treatment equipment and related mechanical and electrical systems.</li><li>Address physical environment issues which could impact patient and staff safety.</li><li>Mix bicarbonate solution according to protocol. Mix acid concentrate solution according to protocol.</li><li>Assist in receiving, storing and stocking of supplies.</li><li>Be familiar with all emergency equipment and emergency operational procedures.</li><li>Use appropriate safety measures including personal protective equipment as necessary.</li><li>Be familiar with OSHA regulations.</li><li>Update Material Safety Data Sheets (MSDS) as required.</li><li>Be aware of all contracts and contacts necessary for the emergency repair of the clinic's equipment and mechanical systems.</li><li>Obtain quotes from reputable and approved contractors as needed to address physical environment issues.</li><li>Present technical summaries in QAPI meetings.</li><li>Maintain collaborative working relationship with Administrator(s). Partner with Administrator(s) to ensure clinic needs are met.</li><li>Actively promote GUEST customer service standards; develop effective relationships at all levels of the organization.</li><li>Respond effectively to inquiries or concerns.</li><li>Participate in staff meetings as required. Attend in-service and continuing education offerings in compliance with company policy and procedure.</li><li>Complete initial and annual technical training on clinical staff as required.</li><li>Instruct staff in use and care of equipment and answer questions.</li><li>Participate in team concepts and promote a team effort.</li></ul>

U.S. Renal Care

Dialysis Biomedical Technician

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

Dialysis Patient Care Technician - Float

ResponsibilitiesAbout Howmet AerospaceHowmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow:&nbsp;<a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>,&nbsp;<a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>,&nbsp;<a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>,&nbsp;<a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and&nbsp;<a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>.Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.Howmet Fastening Systems (HFS) is seeking a 2nd Shift Machine Tech II&nbsp;in our&nbsp;Torrance, CA&nbsp;location. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California.&nbsp; We hold the number one global position in aerospace fastening systems, and we’re the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.Primary PurposeSets up, operates, and trouble shoots various secondary machines in all manufacturing departments.Major Activities<ul> <li>Proficiently sets up, operates, and trouble shoots machinery for self</li> <li>Has knowledge or experience doing manual tap, trim, and crimp&nbsp;</li> <li>Sets up machines, according to work order set standard procedures and specialized company products and/or processes</li> <li>Learns the set up and operation of any new machines added to the departments to which assigned</li> <li>Checks parts with standard gauges or precision measuring instruments and submits parts for inspection as required</li> <li>Operates machines to ensure proper functioning and releases to and instructs operator in procedures for producing parts in conformance with specifications</li> <li>Perform SPC Charting as required</li> <li>Keeps work area clean, safe, and in an orderly fashion on a daily basis</li> <li>Performs other tasks as required</li></ul>Essential Knowledge &amp; Skills<ul> <li>Certified in Lock Out/Tag Out&nbsp;</li> <li>Ability to read and interpret blueprints</li> <li>Must have good communication skills and know basic shop math&nbsp;</li> <li>Must be able to read, write and understand English</li> <li>Must be able to lift/move up to 30 lbs. (may not exceed per EHS Policies)</li></ul>QualificationsBasic Requirements:<ul> <li>High school diploma or general education degree (GED)&nbsp;preferred.</li> <li>Minimum 1 year experience in relevant machining experience.</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant’s ability to lawfully obtain access to such items.</li></ul>Benefits/Salary:The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation.&nbsp;Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The hourly range for this position is $19-$24.About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutHowmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

Howmet Aerospace

2nd Shift Machining Technician II

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients.&nbsp; The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.What you'll be doingPatient care. &nbsp;You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. &nbsp;You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. &nbsp;You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings. PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

Dialysis Patient Care Technician

Company Profile SoCal JCB is a highly successful, fast-growing business We pride ourselves in customer service. We invest in our workforce and offer a highly competitive compensation and benefit program. SoCal JCB is an authorized dealer for JCB construction equipment including skid steer loaders, backhoe loaders, wheel loaders, excavators and telehandlers.Position SummaryReporting to the Service Manager. This position is responsible for&nbsp;repairing and maintaining various types of aerial and earth moving equipment.Major Tasks, Responsibilities &amp; Key Accountabilities<ul><li>Complete and turn in field reports that capture all time and work completed on site</li><li>Provide diagnostic analysis, repair, or preventative maintenance to customers</li><li>Complete on-site system audits and evaluations</li><li>Practice and adhere to all safety and training</li></ul>Qualifications<ul><li>Strong written and verbal communication skills</li><li>5+ years' installing and maintaining machines</li><li>Ability to travel</li><li>Ability to lift up to 75 pounds</li></ul>Physical Requirements:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.<ul><li>Ability to stand and walk, with frequent lifting, guiding and/or carrying of light-weight materials or equipment for up to 12 hours.&nbsp;</li><li>Ability to twist upper body frequently, bend at waist, kneel, crouch and negotiate uneven surfaces.</li><li>Able to lift up to 50lbs</li><li>Use hands, arms and legs fully; grasp, manipulate, and assemble small to large objects with the aid of forklifts or cranes as needed; see and hear well.&nbsp;</li><li>Must be able to hear with or without aid.</li><li>Good eye hand coordination.&nbsp;</li><li>Communicate by speech and hearing in person at a Basic English proficiency.</li></ul>JCB is an equal employment opportunities (EEO) employer in accordance with applicable federal, state and local laws. JCB complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities.JCB is not currently hiring individuals for this position who now or in the future require sponsorship for employment visa status; however, as a global company, JCB offers many job opportunities outside of the U.S. which can be found through our website at <a href="https://www.jcb.com/en-gb/about/careers" target="_blank">https://www.jcb.com/en-gb/about/careers</a>.JobFamilyCustomer ServicePayTypeHourly

SoCal JCB - Field Service Technician 

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

Dialysis Patient Care Technician TTS

Dialysis Patient Care Technician Closer | MWF

ResponsibilitiesAbout Howmet AerospaceHowmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow:&nbsp;<a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>,&nbsp;<a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>,&nbsp;<a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>,&nbsp;<a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and&nbsp;<a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>.Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.Howmet Fastening Systems (HFS) is seeking a Machine Tech II&nbsp;in our&nbsp;Torrance, CA&nbsp;location. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California.&nbsp; We hold the number one global position in aerospace fastening systems, and we’re the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.Primary PurposeSets up, operates, and trouble shoots various secondary machines in all manufacturing departments.Major Activities<ul> <li>Proficiently sets up, operates, and trouble shoots machinery for self</li> <li>Has knowledge or experience doing manual tap, trim, and crimp&nbsp;</li> <li>Sets up machines, according to work order set standard procedures and specialized company products and/or processes</li> <li>Learns the set up and operation of any new machines added to the departments to which assigned</li> <li>Checks parts with standard gauges or precision measuring instruments and submits parts for inspection as required</li> <li>Operates machines to ensure proper functioning and releases to and instructs operator in procedures for producing parts in conformance with specifications</li> <li>Perform SPC Charting as required</li> <li>Keeps work area clean, safe, and in an orderly fashion on a daily basis</li> <li>Performs other tasks as required</li></ul>Essential Knowledge &amp; Skills<ul> <li>Certified in Lock Out/Tag Out&nbsp;</li> <li>Ability to read and interpret blueprints</li> <li>Must have good communication skills and know basic shop math&nbsp;</li> <li>Must be able to read, write and understand English</li> <li>Must be able to lift/move up to 30 lbs. (may not exceed per EHS Policies)</li></ul>QualificationsBasic Requirements:<ul> <li>High school diploma or general education degree (GED)&nbsp;preferred.</li> <li>Minimum 1 year experience in relevant machining experience.</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant’s ability to lawfully obtain access to such items.</li></ul>Benefits/Salary:The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation.&nbsp;Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The hourly range for this position is $19-$24.About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutHowmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

Machining Technician II

Salary Range:&nbsp;&nbsp;$47,840.00&nbsp;(Min.) -&nbsp;$57,062.00&nbsp;(Mid.) -&nbsp;$68,474.00&nbsp;(Max.)Established in 1997, L.A. Care Health Plan is an independent public agency created by the state of California to provide health coverage to low-income Los Angeles County residents. We are the nation’s largest publicly operated health plan. Serving more than 2 million members, we make sure our members get the right care at the right place at the right time. Mission: L.A. Care’s mission is to provide access to quality health care for Los Angeles County's vulnerable and low-income communities and residents and to support the safety net required to achieve that purpose. <h4>Job Summary</h4>The Authorization Technician II supports the Utilization Management (UM) Specialist by handling all administrative and technical functions of the authorization process including intake, logging, tracking and status follow-up.The Authorization Technician II collects information required by clinical staff to render decisions, assists the Manager and Director of the Utilization Management department in meeting regulatory time lines by maintaining an accurate database inventory of referral authorizations, retrospective reviews, concurrent reviews and grievance/appeal requests, and prepares UM Activity and Weekly Compliance Reports.In addition, the position performs data entry and processing of referrals/authorizations in the system, &nbsp;authorizes request consistent with auto authorization criteria, maintains confidentiality when communicating member information, and assists with the communication of determinations by preparing template letters for members/ providers, with other duties as assigned.<h4>Duties</h4><h4>Functional Elements: Technical Support to UM Specialist: Processing of time sensitive authorization and pre-certification requests to meet department timeframes and regulatory requirements; Computer Input: Accurately and completely processing referrals/authorizations and distribute a complete file to UM Specialist within 2 hours of receipt; identify duplicate requests using the claims and verify existing authorization. Independently identifying and appropriately returning to claims or member services any file that is a duplicate to one already processed in the system; appropriately documenting what information was used in making this determination within 4 hours of receipt. Appropriate identification and timely notification of time sensitive requests; appropriately identifying for the staff which you support, request that are priority based on date of receipt and established Turnaround Time criteria for compliance. Accurate filing/maintenance of confidential member information. Creating secure, complete, files. Interface with members, medical personnel and other internal and external agencies; ensure&nbsp; all comply with L.A. Care requirements such as submitting requested information in a timely manner and using the approved Authorization Request form with complete medical information i.e.: ICD 10 codes, CPT, HCPC codes. (35%)</h4><h4>Assist in the preparation of communication for authorization determinations, including, but not limited to preparing template letters for members and providers (authorization approval, denial, deferral, modification and pay/education). (30%)</h4><h4>Assist in the technical aspects of the retrospective review process for authorizations and Member or Provider Appeals, including, but not limited to computer data entry, logging, copying, preparing of template letters for communication of appeal determinations to members, providers and partners (appeal uphold or overturn) and filing: Set up GNA files for review, log and keep track all due dates for each file. Inform nurses of a new case received from Grievance and Appeals Specialist.; submit all Grievances and Appeals response letters to Grievances Specialist on daily basis. (20%)</h4><h4>Support UM Committee and Audit activity via Department performance reporting. Assure the accuracy of reports concerning inventory and department proficiency in maintaining regulatory standards and time frames. (5%)</h4>Perform other duties as assigned. (10%)<h4>Duties Continued</h4><h4>Education Required</h4>High School Diploma/or High School Equivalency Certificate<h4>Education Preferred</h4><h4>Experience</h4>Required:At least 6 months of health care experience.Experience working in a cross functional work environment.Preferred:Experience in Medi-Cal managed care.1 year of experience in UM/Prior Authorization.<h4>Skills</h4>Required:Demonstrated proficiency in Medical Terminology required.Strong verbal and written office communication skills.Proficient with Microsoft Office Suite and Adobe PDF. and Excellent organizational, interpersonal and time management skills. Must be detail-oriented and an enthusiastic team player.Preferred:Knowledge of QNXT computer systems a plus.Knowledge of the UM patient referral process.Knowledge of member’s health plan eligibility.Knowledge of member’s benefits coverage. Knowledge of Health Plan regulations.Knowledge of HMO/UM functions.Knowledge of ICD-10/CPT coding. Proficient utilizing electronic medical records and documentation programs.<h4>Licenses/Certifications Required</h4><h4>Licenses/Certifications Preferred</h4>Medical Coding Certification<h4>Required Training</h4><h4>Physical Requirements</h4>Light<h4>Additional Information</h4>Required:Weekends and holidays hours may be required, as well as OT based on a business need.Salary Range Disclaimer: The expected pay range is based on many factors such as geography, experience, education, and the market.&nbsp; The range is subject to change.This position is a limited duration position. The term of this position is a minimum one year and maximum of two years from the start date unless terminated earlier by either party. Limited duration positions are full-time positions and are eligible to receive full benefits. L.A. Care offers&nbsp;a wide range of benefits including<ul><li>Paid Time Off (PTO)</li><li>Tuition Reimbursement</li><li>Retirement Plans</li><li>Medical, Dental and Vision</li><li>Wellness Program</li><li>Volunteer Time Off (VTO)</li></ul> Nearest Major Market: Los Angeles Job Segment: EMR, Data Entry, Medical Coding, Claims, Healthcare, Administrative, Insurance

50 Technician Jobs in Torrance, CA, USA