field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

USRC's greatest strength in being a leader in the dialysis industry is our ability to recognize and celebrate the differences in our diverse workforce. We strongly believe in recruiting top talent and creating a diverse and inclusive work climate and culture at all levels of our organization.&nbsp;The Biomedical Technician is responsible for overseeing the overall operational condition, maintenance and repair of all water treatment equipment, all medical equipment and mechanical/electrical systems to ensure patient safety and the safety of all staff operating such equipment for their assigned clinic(s).ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.&nbsp; Other duties and tasks may be assigned.&nbsp;<ul><li>Demonstrate effective use of supplies and staff labor hours.</li><li>Assist with purchasing as needed: place orders, perform weekly and month end inventory counts.</li><li>Be familiar with the overall procedures used in Inventory Control (FIFO) and assist in the documentation and control of excess inventory.</li><li>Perform duties as assigned to meet the patient care or operational needs of the clinic.</li><li>Troubleshoot, repair and maintain equipment as recommended by the manufacturer.</li><li>Repair, calibrate, test, clean and disinfect dialysis machines, water distribution loop and RO's according to protocol.</li><li>Perform water quality checks to include but not limited to: free chlorine, total chlorine, and water hardness testing.</li><li>Perform safety checks and tests on all pretreatment water equipment including but not limited to carbon tanks, water softeners, RO units, UV lamps and ultrafilters.</li><li>Collect samples of RO water and dialysate for microbiology testing according to protocol.</li><li>Collect water samples for AAMI analysis testing according to protocol.</li><li>Disinfection of central bicarbonate system and mixing tank according to protocol.</li><li>Disinfection of RO, distribution system, and hemodialysis machines according to protocol.</li><li>Perform duties at all times within limitations established by and in accordance with company policy and procedures, applicable state and federal laws and regulations.</li><li>Perform electrical safety on dialysis machines and related equipment.</li><li>Be familiar with instruction manuals and operation for equipment in accordance with manufacturer's recommendations. Be capable of starting up and shutting down facility's equipment if necessary.</li><li>Maintain established preventative maintenance programs and required support documentation.</li><li>Maintain accurate maintenance records for the facility's equipment.</li><li>Have knowledge of the function and safe operation of water treatment equipment and related mechanical and electrical systems.</li><li>Address physical environment issues which could impact patient and staff safety.</li><li>Mix bicarbonate solution according to protocol. Mix acid concentrate solution according to protocol.</li><li>Assist in receiving, storing and stocking of supplies.</li><li>Be familiar with all emergency equipment and emergency operational procedures.</li><li>Use appropriate safety measures including personal protective equipment as necessary.</li><li>Be familiar with OSHA regulations.</li><li>Update Material Safety Data Sheets (MSDS) as required.</li><li>Be aware of all contracts and contacts necessary for the emergency repair of the clinic's equipment and mechanical systems.</li><li>Obtain quotes from reputable and approved contractors as needed to address physical environment issues.</li><li>Present technical summaries in QAPI meetings.</li><li>Maintain collaborative working relationship with Administrator(s). Partner with Administrator(s) to ensure clinic needs are met.</li><li>Actively promote GUEST customer service standards; develop effective relationships at all levels of the organization.</li><li>Respond effectively to inquiries or concerns.</li><li>Participate in staff meetings as required. Attend in-service and continuing education offerings in compliance with company policy and procedure.</li><li>Complete initial and annual technical training on clinical staff as required.</li><li>Instruct staff in use and care of equipment and answer questions.</li><li>Participate in team concepts and promote a team effort.</li></ul>

U.S. Renal Care

Dialysis Biomedical Technician

Commitment to MissionThis job carries with it the obligation to uphold the Mission of Lone Star College (LSC) in carrying out the duties of the position. A commitment to positive interpersonal behaviors, professional communication, integrity, leadership, stewardship, respect and accountability to LSC students and employees is essential.Cultural Beliefs<ul><li>One LSC</li><li>Student Focused</li><li>Own It</li><li>Foster Belonging</li><li>Cultivate Community</li><li>Choose Learning</li></ul>The Chronicle of Higher Education's "Great Colleges to Work For®" is designed to recognize colleges that have been successful in creating great workplaces and to further research and understanding of the factors, dynamics and influences that have the most impact on organizational culture at higher education institutions.Lone Star College has been recognized in multiple categories.Campus Marketing StatementLone Star College-CyFairLone Star College offers high-quality, low-cost academic transfer and career training education to 80,000+ students each semester. LSC has been named a 2023 Great Colleges to Work For® institution by the Chronicle of Higher Education. LSC consists of eight colleges, seven centers, eight Workforce Centers of Excellence and Lone Star Corporate College.Located in suburban northwest Houston in the heart of the CyFair Community, the college provides a full range of offerings including unique programs in fire science technology, logistics management and sonography. Since opening our award winning campus in 2003, the college has experienced record growth and supports an exciting learning environment that brings together state-of-the-art technology and active, collaborative learning.Location address is 9191 Barker Cypress Road, Cypress, TX 77433.Job DescriptionPURPOSE AND SCOPE:Under general supervision, the Technician I supports and maintains minor in-house computer systems, desktops, and peripherals. He or She is responsible for Level I installation, diagnosing, repairing, maintaining, and upgrading all minor hardware and equipment while ensuring optimal workstation performance.ESSENTIAL JOB FUNCTIONS:<ul><li>Install, configure, test, maintain and troubleshoot minor/Level I end user workstation hardware</li><li>Receive and respond to incoming calls, pages, and/or e-mails regarding PC and/or hardware problems</li><li>Help develop and maintain an inventory of all monitors, keyboards, hard drives, modems, printers, scanners, and other peripheral equipment</li><li>Assist in preparing, maintaining, and upholding procedures for logging, reporting, and statistically monitoring PC performance</li><li>Document instances of hardware failure, repair, installation, and removal</li><li>Construct, install, and test customized configurations based on various platforms and operating systems</li><li>Responsible for other reasonable, related duties as assigned</li></ul>KNOWLEDGE, SKILLS AND ABILITIES:<ul><li>Some working technical knowledge of current network protocols, operating systems, and standards, including Windows or Mac OS, Microsoft office, printers, Ethernet cabling, basic multimedia systems, email applications</li><li>Ability to operate tools, components, and peripheral accessories</li><li>Ability to read and understand technical manuals, procedural documentation, and OEM guides</li></ul>PHYSICAL ABILITIES:The work is sedentary. Typically, the employee sits comfortably to do the work. However, there may be some walking; standing; bending; carrying of light items, such as papers, books, or small parts; or driving an automobile. No special physical demands are required to perform the work.WORK SCHEDULE AND CONDITIONS: <ul><li>Equipment used includes, PC workstation running on a LAN in a Microsoft Windows environment, calculator, phone and other general office equipment</li><li>Interface with internal and external contacts as needed to carry out the functions of the position</li><li>Work is performed in a climate-controlled office with minimal exposure to safety hazards</li></ul>REQUIRED QUALIFICATIONS:<ul><li>High school diploma or GED </li></ul>SalaryHourly Pay Rate is $13.52Benefits Marketing StatementBy joining our top-notch institution, you will enjoy being a part of an organization that offers a supportive, collegial work environment, excellent work/life balance, tuition waiver, participation in a tax deferred retirement plan and more.Special InstructionsGo to the Job Search page, click on ‘My Activities’ at the top of the page. Under My Cover Letters and Attachments you will click on ‘Add Attachment.’ Please be sure to put the Job ID# in the title once you name your file for cover letters only, unless you attached your cover letter with your resume.If you are applying for an Instructional position (i.e. Faculty, Adjunct Faculty, Instructor), please ensure you include the following to be considered: Resume/CV, Cover Letter, Teaching Philosophy, and unofficial transcripts. You must limit your file name for any attachment to 40 characters or less.How to ApplyALL APPLICANTS MUST APPLY ONLINE ONLYWe will not accept application material received via fax, email, mail, or hand delivered.Postings for part-time and adjunct positions are active for the academic year. By selecting the option to receive notifications on your profile, you will begin receiving electronic communication regarding new opportunities with Lone Star College (LSC).If selected for an interview, a recruiter will contact you by phone, or email to schedule an interview.Lone Star College participates in the E-Verify program, under which Lone Star College provides the federal government with information from each new employee's Form I-9 to confirm that the employee is authorized to work in the United States.More information on the E-Verify program is available at <a href="http://www.dhs.gov/E-Verify" target="_blank">www.dhs.gov/E-Verify</a>.Lone Star College is an EEO Employer. All positions are subject to a criminal background check.

Part-Time PC Technician I

Current employees: Please apply through the employee portal to be considered for this opportunity.Pay Range:$28.47 - $34.80 HourlyDepartment:Department of Community Services (DCS)Job Type:Regular RepresentedExemption Status:United States of America (Non-Exempt)Closing Date (Open Until Filled if No Date Specified):May 25, 2025 The Opportunity:<h4>OVERVIEW:</h4>This Work Matters!Make a real difference. Join our amazing team as a Certified Veterinary Technician at Multnomah County Animal Services.If you're a passionate Certified Veterinary Technician (CVT) who believes in high quality animal care, evidenced based&nbsp; best practices in shelter care, helping pets find loving families, and ensuring everyone in our community can access our services, then we want YOU! Here’s why you want to join Multnomah County Animal Services (MCAS)We're not your average animal shelter. At MCAS, we're all about:<ul><li>Diversity and Inclusion:We celebrate our differences and create a welcoming space for everyone.</li><li>Growth and Opportunity:We want you to thrive! We offer chances to learn, lead, and build a fulfilling career.</li><li>Work/Life Balance:We know veterinary work can be tough, so we support our team and foster a positive environment.</li></ul>Here’s What You'll Do:This isn't just a job; it's a chance to expand your skills and make a huge impact. You'll get to:<ul><li>Care for All Kinds of Animals: From health exams to treatment plans, you'll work with a variety of pets.</li><li>Help Lost Pets: Provide care and comfort to stray, abandoned, and lost animals.</li><li>Partner with colleagues:Work with our teams on suspected abuse or neglect cases. You may even encounter unique animal hoarding cases that require high-volume intake protocols and innovative problem-solving.</li><li>Handle Wildlife:Learn about humane euthanasia and low-stress handling of local wildlife.</li><li>See Unique Cases:Work with our veterinarians to diagnose and treat unusual medical conditions.</li><li>Fight Pet Overpopulation:Get training in high-quality spay and neuter practices.</li><li>Care for Newborns:Gain hands-on experience with neonatal care across a variety of species.</li></ul>Here’s What We Offer:<ul><li>A Dynamic Workplace:No two days are the same! We're always learning and improving.</li><li>Great Benefits: Think retirement benefits,&nbsp;student loan forgiveness programs (if eligible) and &nbsp;employee assistance programs.</li><li>Time Off:Generous vacation, holidays, and parental leave, plus benefits from Paid Leave Oregon.</li><li>Health and Wellness: Robust health plans, mental health services, gym discounts, and more!</li><li>Career Growth: Opportunities to advance and continue your education.</li></ul>Check out all of our awesome benefits!Here’s Who We're Looking For:<ul><li>Someone Who Values Diversity, Equity and Inclusion:You promote a culture of inclusivity and appreciation for diverse perspectives.</li><li>Culturally Sensitive:You understand and practice racial and socioeconomic equity.</li><li>Animal Handling Skills:You know how to handle animals safely and with low stress.</li><li>Cool Under Pressure: You stay calm and efficient, even when things get busy.</li><li>Great Communicator:You provide excellent customer service and communication.</li><li>Detail-Oriented:You complete tasks with care and thoroughness.</li></ul>About the AreaIf you’re looking at us from across the country, know that Oregon is one of the most beautiful places on earth. Made up of seven diverse regions, Oregon has the ocean, mountains, valleys, high desert, cities, small towns, and almost everything in between.Multnomah County has a population exceeding 790,000 and a diverse metro area of over 2 million. Although the county’s beautiful and progressive city of Portland has the cultural and recreational opportunities of a large city, it has the heart of a small town. In addition to Portland, Multnomah County encompasses cities such as Corbett, Fairview, Gresham, Maywood Park, Troutdale, Wood Village. Portland is just thirty minutes from the Cascade Mountains, with hiking, ski resorts, camping and fishing. Travel one hour west to find some of the most dramatic and pristine beaches on the West Coast. Portland lies in the Marine West Coast climate region, marked by warm, dry summers and rainy but mild winters. Portland is a foodie’s dream, with regional cuisine featuring microbreweries and micro-distilleries, local wine, seafood, and produce; along with one of the country’s largest food cart scenes. Classical music, ballet, and our art museum live comfortably alongside vibrant contemporary art and jazz music scenes. Multnomah County is a reader’s paradise – our libraries boast the largest circulation in the country and world-class book stores abound. Sauvie Island, an agricultural and scenic wildlife preserve, has some of the region’s best produce, including Oregon’s famous berries. Portland has been referred to as one of the most environmentally friendly or “green” cities in the world. The city and region are noted for strong land-use planning and investment in light rail, supported by Metro, a distinctive regional government. More information about the Portland metro area is available at <a href="http://www.travelportland.com" target="_blank">www.travelportland.com</a> and <a href="http://www.portlandmetrochamber.com" target="_blank">www.portlandmetrochamber.com</a>.Minimum Qualifications:<ul><li>6 months of animal health experience AND</li><li>Certified Veterinary Technician certificate from the Oregon Veterinary Medical Board AND</li><li>Euthanasia Technician certificate (or ability to get it within 6 months).</li></ul>Bonus Points If You Have:<ul><li>2 years of CVT experience in a practice OR 1 year in a shelter.</li><li>Experience handling high-stress situations.</li><li>Experience with spay/neuter surgeries.</li><li>Experience with shelter population health.</li><li>Ability to work independently and collaboratively.</li></ul>Join us and make a difference in the lives of animals and the community we serve!This recruitment will be used to fill any current and future full-time, part-time, on-call, temporary and limited duration positions while the eligible for hire list is active.<h4>TO QUALIFY:</h4>We will consider any combination of relevant work experience, volunteering, education, and transferable skills as qualifying unless an item or section is labeled required. Please be clear and specific about how your background is relevant. For details about how we typically screen applications, review our overview of theselection process page.<h4>Minimum Qualifications/Transferable Skills*:</h4><ul><li>Six (6) months of work experience in an animal health-related field; AND</li><li>Possession of a Certified Veterinary Technician certificate issued by the Oregon Veterinary Medical Board as outlined by OAR 875-030-0010; AND</li><li>Possession of, or ability to obtain within six (6) months of hire, a Euthanasia Technician certificate issued by the State of Oregon.</li></ul><h4>Preferred Qualifications/Transferable Skills*:</h4>You do not need to have the following preferred qualifications/transferable skills to qualify. However, keep in mind we may consider some or all of the following when identifying the most qualified candidates. Please clearly explain on your application how you meet any of the following preferred qualifications/transferable skills.<ul><li>Two (2) years of Certified Veterinary Technician (CVT) experience in a veterinary practice; OR one (1) year of CVT experience in an animal shelter setting.</li><li>Ability to effectively handle high-stress situations while still demonstrating the key values and mission of MCAS.</li><li>Demonstrated experience in supporting high-volume spay/neuter surgeries.</li><li>Demonstrated experience in assisting in the management of overall population/herd health in a shelter setting, including assisting in the management of infectious disease outbreaks.</li><li>Demonstrated ability to work both independent of and in collaboration with veterinarians, other CVTs, and veterinary assistants.</li></ul>*Transferable skills: Your transferable skills are any skills you have gained through education, work experience (including the military) or life experience that are relevant for this position. Be sure to describe any transferable skills on your application and clearly explain how they apply to this position. Diversity and Inclusion: At Multnomah County, we don't just accept difference; we value it and support it to create a culture of dignity and respect for our employees.We are proud to be an Equal Opportunity Employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran or protected veteran status, genetic information and other legally protected characteristics. The EEO Know Your Rights poster is available for your reference. Multnomah County is a VEVRAA Federal Contractor. We request priority protected veteran referrals.Veterans’ Preference: Under Oregon Law, qualifying veterans may apply for veterans’ preference. Review our veterans’ preference page for details about eligibility and how to apply.Accommodation under the Americans with Disabilities Act: We gladly provide reasonable accommodation to anyone whose specific disability prevents them from completing an application or participating in this recruitment process. Please contact the recruiter below in advance to request assistance. Individuals with hearing or speech impairments may contact the recruiter through the Telecommunications Relay Service by dialing 711.Questions?Recruiter:Marisa MessinaEmail:<a href="mailto:marisa.messina@multco.us" target="_blank">marisa.messina@multco.us</a>Phone:+1 (971) 3139319Application information may be used throughout the entire selection process. This process is subject to change without notice.Disclaimer: This announcement is intended as a general descriptive recruitment guide and is subject to change. It does not constitute either an expressed or implied contract.Job Profile:6066 - Veterinary Technician

Certified Veterinary Technician

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.CompensationThe base hourly rate for this position is $35.64.Supports and promotes safe practices and environmental commitments in alignment with company commitments, policies, and compliance requirements Perform mechanical preventative maintenance according to an established schedule on all required equipment.&nbsp; Inspect machinery, lubricate and make adjustments or repairs as needed and take faulty equipment out of operation until repaired. Effectively troubleshoot all mechanical equipment to identify issues within the plant and take necessary corrective actions to repair, replace or rebuild. Continuously work in a safe manner and report all safety hazards. Work with Maintenance Apprentice to develop there require skills to complete Apprenticeship program Maintain an open and candid working relationship with immediate supervisor/manager discussing all matters of importance. Perform other job functions as requested to support the effective and efficient operation of the plant, including duties of lower classifications. Reads, interprets and follows blueprints and sketches, making all measurements and calculations necessary to complete the job. Makes out work orders, requisitions, inspection reports, time distribution, material usage, etc., and performs other clerical duties necessary to maintain proper records relative to the work performed. Directs, assists, and instructs other maintenance employees on jobs where it is necessary to work together or when requested by Supervisor. Does gas cutting as directed.&nbsp; Inspects/maintains plant buildings and maybe required to cast concrete forms and bollards as needed. Operates, maintains, inspects, lubricates and repairs all plant systems as required. Housekeeping responsibilities. Uses safe work practices and reports hazardous conditions.Follow safety guidelines in the defiance complex. &nbsp;Wear proper PPE. &nbsp;Follow all general shop rules for defiance complex. &nbsp;Cleanup your work area (unit). &nbsp;Attend all monthly safety meetings.&nbsp; &nbsp;Complete safety/beware audits on a monthly basis. &nbsp;Complete computer based training and all other programs needed to stay in compliance with company policy’sPlease Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Johns Manville

Journeyman Mechanic

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients.&nbsp; The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.What you'll be doingPatient care. &nbsp;You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. &nbsp;You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. &nbsp;You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings. PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

Dialysis Patient Care Technician

Howmet Aerospace, headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit&nbsp;<a>www.howmet.com</a>. Follow us!&nbsp; @howmet:&nbsp;Twitter,&nbsp;Instagram,&nbsp;Facebook,&nbsp;LinkedIn&nbsp;and&nbsp;YouTube. Howmet Aerospace’s Hampton Structural Castings (HSC) is seeking an CNC Programmer Engineering Technician who has a demonstrated ability to achieve results, as well as the passion to put that experience to work to lead activities and support the plant/location team to achieve manufacturing excellence. &nbsp;Our organization is dedicated to rapid, profitable growth through operational excellence and career development.&nbsp; If you are an energetic professional who wants to be a part of a dynamic team, we encourage you to apply. Essential Job Functions &amp; Responsibilities: <ul><li>Maintain a safe working environment by adhering to, and enforcing, all safety procedures and policies including use of personal protective and other equipment as required.</li><li>Communicate effectively with co-workers, management, customers, and others in a courteous and professional manner.</li><li>Adequate and timely completion of assigned tasks.&nbsp;</li><li>Responsible for day-to-day machine shop coordination of programming issues.</li><li>Generation of CAM System wire and solid modelling files.</li><li>CAM post editor file creation, organization, and management.</li><li>Create and upload operator ready G&amp;M code program solutions for safe CNC Turning and Machining Center production operations.</li><li>Develop advanced manufacturing programs for high-speed CNC Turning and Machining Center applications.</li><li>Create programs for parts with geometry or tolerances that exceed the capabilities of manual inspection equipment. &nbsp;</li><li>Choose proper tooling, feeds and speeds, tool holders, and probes required for various materials and part geometry.&nbsp;</li><li>Create&nbsp;CNC tool pathing&nbsp;to ensure safe clearance movements around work pieces&nbsp;with non-interference proofing.</li><li>Demonstrate understanding of when to utilize high efficiency practices and advanced tool paths.&nbsp;</li><li>Perform in process inspection using manual inspection equipment.&nbsp;</li><li>Understand inspection intent.&nbsp;</li><li>Create work instructions for program set ups and machine use.&nbsp;</li><li>Operate machinery as requested by management.</li><li>Interface with supervisor and/or area lead regarding troubleshooting support, edits, and optimization.&nbsp;</li><li>Create and maintain a master tool list&nbsp;</li><li>Work with various tooling venders to reduce tooling spend without negatively impacting quality, efficiency, or morale.&nbsp;</li><li>Manage tooling to ensure no stockouts&nbsp;</li><li>Lead and participate in continuous improvement activities.&nbsp;</li><li>The Manufacturing CNC Programmer may perform other special projects or duties as required to support business needs.</li></ul> Basic Qualifications <ul><li>High School&nbsp;Diploma&nbsp;or GED&nbsp;</li><li>Must have 3-5 years of CNC programming experience with various types of machining and Fanuc controls.</li><li>Must be proficient in Surf CAM software.&nbsp;</li><li>Must be available and willing to work overtime as needed</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.&nbsp;</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul> Preferred Qualifications <ul><li>Technical certificate or program completion in CNC machining or CNC/CMM programming.&nbsp;</li><li>Familiar with ISO and LEAN manufacturing practices.&nbsp;</li><li>Knowledge of CAM and CAD software (Mastercam, Autodesk Fusion, Siemens NX CAM, Autodesk PowerMILL and ESPRIT).</li><li>Must demonstrate proficient computer literacy.&nbsp;</li><li>Proficient with CAM and CAD software.&nbsp;</li><li>Must be adaptable to changing work environment, competing demands and able to deal with frequent changes, delays, or unexpected events.&nbsp;</li><li>Must demonstrate excellent troubleshooting techniques and critical thinking skills.&nbsp;</li><li>Competent in maintaining databases or archives of programs, operation sheets, tooling, and work instructions.&nbsp;</li><li>Able to understand and translate G&amp;M machine code&nbsp;</li><li>Familiar with individual CNC/CMM machine safety features/dangers as they relate to production and operator usage.&nbsp;</li><li>Able to read drawings and specifications with a proficient understanding of GD&amp;T.&nbsp;</li><li>Knowledgeable of manufacturing practices for various materials.&nbsp;</li><li>Able to choose proper tooling and operation sequences dependent on required tolerances.&nbsp;</li><li>Knowledgeable of how various materials and conditions affect metrology.&nbsp;</li><li>Demonstrate competence in efficient CNC/CMM programming techniques&nbsp;</li><li>Knowledgeable of various CMM probe and stylus types as well as CNC tool holder types.&nbsp;</li><li>Experience with close tolerance high speed machining.</li><li>Strong oral and written communication skills.</li><li>Must be self-motivated, an independent thinker, and able to work efficiently with minimal supervision.&nbsp;</li></ul> Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

CNC Programming Engineering Technician

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

Dialysis Patient Care Technician Floater FT

Sprague is passionate about delivering diverse products and programs that warm, power and move the world. We keep homes warm through Northeastern winters and hospitals cool through summer. We help small businesses focus on serving their communities, and our renewable fuels keep our country’s infrastructure running. From importing wind energy components to deploying leading-edge solar technology to help power terminal facilities, we are committed to continually evolving to meet our customers’ changing energy needs.Are you ready to join a dynamic team and contribute to the energy solutions of tomorrow? We are currently seeking an experienced Service Technician with a minimum of five years’ experience servicing and maintaining heating equipment. &nbsp;As part of our team, you will be responsible for troubleshooting, diagnosing, repairing, and servicing gas and oil burner equipment, controls, piping and wiring at our customer locations throughout the New York Metropolitan area.Experience/Qualifications:<ul><li>Proficient in servicing, repairing, maintaining, and troubleshooting #2 and #4 oil burners.</li><li>Demonstrated expertise in commercial and industrial heating installations.</li><li>Skilled in starting up, diagnosing, and rectifying all equipment defects.</li><li>Proficient in reading and comprehending wiring diagrams.</li><li>Capable of adjusting and fine-tuning equipment for optimal efficiency.</li><li>Possess excellent communication and interpersonal skills.</li><li>Hold a valid and clean driver’s license, adept at navigating the New York Metropolitan area.</li><li>Willing and able to obtain a TWIC (Transportation Worker Identification Card).</li><li>Flexible for overtime and weekend work as required.</li><li>High School Diploma or GED.</li></ul>Benefits:<ul><li>Competitive pay</li><li>Local 32BJ union (retirement plan and Anthem health insurance)</li><li>Life insurance, PTO,</li><li>Assigned take home van.</li></ul>&nbsp;&nbsp;Physical activity/strength requirements are demanding and may include:<ul><li>Frequent standing, walking, and squatting</li><li>Occasional bending, stooping, climbing (stairs, ladders, slopes), crawling, kneeling, sitting, twisting, and balancing</li><li>Frequent lifting/carrying up to 50 lbs., occasional lifting/carrying over 100 lbs.</li><li>Occasional pushing/pulling over 100 lbs.</li></ul>Come join us to learn why we are consistently celebrating 20-, 30-, and even 40-year anniversaries here at Sprague!&nbsp;The rate for this position is $34.00 to $47.80 per hour, based on experience.Sprague is an EEO/AA employer.&nbsp; We strongly encourage minorities, females, Vets and individuals with disabilities to apply.As a federal contractor we adhere to OFCCP employment regulations.Click here for OFCCP compliance information

Sprague

Sprague Resources GP LLC

Service Technician

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.CompensationThe base hourly rate for this position is $32.02.Position Overview:Day shiftThis position is responsible for communicating and supporting JM core values and delivering the JM experience.The purpose of the Maintenance Technician’s role is to perform routine and non-routine maintenance on production and facility equipment to support production of roofing materials. This position is also responsible for meeting facility targets for safety, productivity, and machine uptime.&nbsp; This role will conduct effective problem solving and troubleshoot processes to develop corrective actions.Responsibilities:&nbsp; <ul><li>Follow all Johns Manville safety and environmental procedures and policies.</li><li>Attend plant safety and training meetings as scheduled.</li><li>Follow Job Safety Analysis (JSA's), uses safe work practices, and reports hazardous conditions at all times. Wear protective clothing &amp; equipment as required.</li><li>Develop JSA’s for new tasks and review JSA’s annually.</li><li>Perform routine and non-routine maintenance activities of mechanical and electrical systems.</li><li>Display advanced working knowledge of electrical (single phase and 3 phase), mechanical, hydraulics, and pneumatics systems.</li><li>Install and repair electrical conduit and cable, including connections, controls, grounding, etc.</li><li>Work from electrical and mechanical schematics to troubleshoot or install new or modify existing equipment.</li><li>Perform voltmeter, ammeter, wattmeter, and other electrical measurements.</li><li>Inspect equipment and reports on defective part and unsatisfactory conditions to further preventative maintenance program.</li><li>Maintain, adjust, service and lubricate equipment keeping it in good operating conditions with respect to proper aligning, functioning and lubrication of parts.</li><li>Participate in continuous improvement and Root Cause Corrective Action (RCCA) teams.</li></ul><ul><li>Assist co-workers as directed.</li><li>Perform and complete other work as assigned by supervisor.</li><li>Provides feedback and solutions to leadership on critical equipment issues pertaining to safety or operational capabilities</li><li>Display flexible outlook toward change management, working on cross-functional teams, training for the use of new tools and methodologies, and willingness and ability to obtain operating knowledge of all production equipment.&nbsp;&nbsp;</li><li>Participate in daily housekeeping efforts.&nbsp; Ensure job site is consistently clean after every job and clean maintenance shop after every shift.</li><li>May be required to perform other related duties as assigned</li></ul>Leadership Responsibilities:<ul><li>There are no supervisory responsibilities for direct reports for this position, but this person must have the skills to interact as a leader with all plant department employees.</li><li>Work with plant supervision to communicate the status of planned jobs, unplanned jobs waiting on parts, or unplanned jobs needing engineering or technical resources</li></ul>Requirements: (education, skills, and abilities)<ul><li>Must be signed off on all Maintenance Technician I job qualifications</li><li>2-5 years multi-craft maintenance experience</li><li>Strong commitment to safety</li><li>Ability to work well with others</li><li>Strong problem-solving capabilities</li><li>Excellent interpersonal and communications skills</li><li>Ability to work effectively in a fast-paced environment</li><li>Intermediate computer skills</li><li>Demonstrated ability to troubleshoot and handle multiple priorities and projects</li><li>Ability to disassemble, diagnose, repair, and perform preventative repair measures on mechanical equipment including, but not limited to: pumps, gearboxes, reducers, couplings, seals, rotating elements, blowers, fans, hydraulic units, valves, chillers, and compressors</li><li>Demonstrate advanced Mechanical aptitude, including pipe fitting, fabricating</li><li>Knowledge of use of hand tools and power tools</li><li>Knowledge of shop machinery, including hydraulic press, mill &amp; drill press, lathe, and saw(s) (band &amp; Chop)</li><li>General knowledge of building lighting systems</li><li>General knowledge of AC/heating systems</li><li>General knowledge of building fire alarm systems</li><li>Advanced knowledge of Lock, Tag, Clear, and Try program</li><li>General knowledge of PLC troubleshooting</li><li>General knowledge of VFD troubleshooting</li><li>Display understanding of 480V system to include arc-flash training and safe working practices per NFPA 70E</li><li>Ability to provide troubleshooting and diagnosis on process heating and cooling equipment</li><li>Ability to consistently make appropriate decisions while being flexible with regard to work assignments and priorities.</li></ul><ul><li>Local travel for training purposes</li></ul>Physical Requirements:The physical requirements of this position are: (these requirements are typical for most of our manufacturing roles)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <ul><li>The ability to stand for extended periods</li><li>The ability to manually lift, push or pull at least 50 pounds safely and with proper body mechanics, sometimes while in awkward positions.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Use of hands (repetitive motion, grabbing, feeling, sensing, pulling)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to work safely in a fast-paced, sometimes stressful work environment</li><li>The ability to safely and effectively work in an often-dusty work environment that experiences a broad range of temperatures (very hot to very cold).&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to withstand the rigors of working a 12(or 8)-hour rotating shift schedule.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to bend, stoop or kneel repetitively.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to reach or work above the shoulder&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li></ul>Incumbent must be physically able to perform essential job functions. Reasonable accommodation may be made to enable individuals with disabilities to perform essential job functions.Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

1,092 Technician Jobs