field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

Welcome to Whataburger CareersThis position is responsible for maintaining a clean, safe, and welcoming environment for guests and staff. This position supports overall restaurant operations by ensuring hygiene standards are met and equipment and facilities are kept in good condition. Ensures each customer’s experience meets or exceeds expectations. The purpose of this position is to ensure smooth daily operations by performing a variety of tasks that contribute to customer satisfaction and overall efficiency.<ul><li>Maintains all utensils and food production equipment in good working order by using the correct cleaning, sharpening, and storage procedures at all times.&nbsp; Utilizes proper cutting surfaces.</li><li>Performs maintenance tasks as scheduled or assigned.</li><li>Demonstrates knowledge of utilization of the Kaivac Univac for mopping, scrubbing, and drying floors in the kitchen, restrooms, and dining rooms.</li><li>Learns and applies the correct location for all items stored and used, such as food products, paper products, cleaning supplies, etc.</li><li>Mops spills or leaks quickly to prevent accidents.</li><li>Demonstrates knowledge of proper handling and storage of all sanitizing and cleaning chemicals.</li><li>Cleans the customer service areas by following the proper procedures, including outside landscaping, building entrances, dining room tables and condiment stations, restrooms, and food production and storage units.</li><li>Follows proper procedures for maintaining sidewalks and parking lot sanitation to include sweeping, scrubbing, etc.</li><li>Notifies the management person on duty of any leaks or equipment failures such as refrigerators/freezers are not maintaining proper temperatures.</li><li>Disposes of all trash properly.</li></ul>9035 Bois D'Arc Ln Fulshear TX 77441

Whataburger

Restaurant Porter - Unit 1589

Welcome to Whataburger CareersThis position is focused on delivering excellent service and quality food in a fast-paced environment. This position ensures each customer receives a hot, freshly prepared product, of the highest quality ingredients. Works collaboratively to ensure orders are accurately made to order and promptly served while following all food safety and company standards. The purpose of this position is to ensure smooth daily operations by performing a variety of tasks that contribute to customer satisfaction and overall efficiency.<ul><li>Ensures all products are prepared according to quality standards, as ordered, and delivered to the customer within Whataburger service time standards.</li><li>Supports food production through the preparation and stocking of various food items.</li><li>Performs maintenance tasks as scheduled or assigned.</li><li>Actively participates in all current sales promotions/marketing events during work time.</li><li>Operates all designated food production or customer service stations.</li><li>Learns and applies the correct location for all items stored and used, such as food products, paper products, cleaning supplies, etc.</li><li>Stocks the drink, fry, and dining room stations and grill area to assure continuous service is maintained</li><li>Demonstrates knowledge of proper storage procedures upon delivery of all produce items. Practices First-In/First Out (FIFO).</li><li>Efficiently prepares all produce items to maintain proper par levels, using the proper food handling, rotation (FIFO) and storage procedures.</li><li>Follows established recipes for preparing and serving Whataburger’s products.</li><li>Maintains all utensils and food production equipment in good working order by using the correct cleaning, sharpening, and storage procedures at all times.&nbsp; Utilizes proper cutting surfaces.</li><li>Cleans the customer service areas by following the proper procedures, including outside landscaping, building entrances, dining room tables and condiment stations, restrooms, and food production and storage units.</li><li>Supports customer service by stocking stations with an appropriate number of items to ensure continuous service.</li><li>Follows company cash handling policies.</li></ul>9035 Bois D'Arc Ln Fulshear TX 77441

Restaurant Team Member, Day Shift - Unit 1589

Restaurant Team Member, Overnight Shift - Unit 1589

About Us: Mitsubishi Logisnext Americas Inc. has helped customers Move The World Forward for more than 100 years as a technology-driven forklift manufacturer. In addition to being a forklift manufacturer, we are also a total solutions provider offering scalable products and services from material handling and automation to extensive fleet support. About the role: Position is responsible for the successful Engineering Development of New Products. This is a hands-on role responsible for the Electrical Engineering of the product such as: Wire Harnesses, CAN Networks, software coding, and selection of electrical components. Objective is for the development of the vehicle Electrical System, Subsystems and Components to meet project targets for Quality, Cost &amp; Timing. This is a hands-on design and release Engineer position. What you will do: <ul><li>Design and release of Electrical Systems, components (harnesses, PCBs, schematics) and software in-line with project plan.</li><li>Identify and recommend options for engineering solutions, improving quality, reducing cost, improving time to market.</li><li>Plan, schedule and implement project tasks within targeted cost, quality and timing deadlines.</li><li>Lead and support building and testing of prototypes including assembly and validation of hardware</li><li>Organizes and analyzes test and design analysis dates. Perform root cause analysis, diagnostics, and troubleshooting of electrical issues</li><li>Ensures cross functional engagement and requirements with Manufacturing-DFM, Service-DFS,</li><li>Works with suppliers to communicate requirements and apply latest technology.&nbsp;</li></ul> When &amp; Where: Hybrid Schedule. 3 days in office.&nbsp; Expected travel 5-10% of the time What you need to have: <ul><li>Bachelor of Science in Electrical Engineering</li><li>2-7 Years of Experience&nbsp;</li><li>&nbsp;3+ years relevant experience (material handling, Automotive, Off-highway, etc.)</li><li>Able to create electrical schematics, troubleshoot electrical circuits and do electrical load analysis</li><li>Knows how to use basic electrical instruments like multimeter, oscilloscope, CANalyzer, etc.</li><li>Critical thinking&nbsp; - to analyze the strengths &amp; weakness of a problem and offer options for solutions</li><li>Understanding of 3D CAD systems, and able to learn basic manipulation/viewing.</li><li>Experience with schematic development tools such as CREO Schematics, or ability to learn.</li><li>Able to create Requirements Documents for areas of responsibility.</li><li>Knowledge of common programming languages&nbsp; (Python, C++, etc..</li></ul> What would be nice to have: <ul><li>Systems Engineering (Electrical) design and release experience</li><li>Knowledge of embedded systems and microcontrollers</li><li>Experience with electrical and firmware/software testing, troubleshooting, and issue resolution</li><li>Hands-on experience with the design and testing of controllers and power electronics</li><li>Proficiency with CAD tools for PCB design (e.g., Altium, Eagle)&nbsp;</li></ul> What we offer: <ul><li>Medical, dental, and vision benefits</li><li>Paid Vacation, Sick Time, and Paid Holidays</li><li>Profit Sharing Opportunities</li><li>Flexible Spending and HSA Accounts</li><li>401k with automatic company contribution and company match</li><li>Short-term and long-term disability insurance</li><li>Life, Dependent Life, and AD&amp;D Insurance</li><li>Paid Parental Leave (Includes 6-8 weeks of maternity leave and 5 days of paternity leave)</li><li>Employee Assistance Program</li><li>Employee Discounts</li><li>On-site fitness center (Houston)</li><li>On-the-job training and development</li></ul> The salary for this position ranges from $74,129 to $90,011 annually. The specific salary for a successful candidate will depend upon, among other legitimate factors, education, training, and/or experience. To be considered for this role, all applicants must submit a full and complete application through our careers page. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment visa at this time. Equal Opportunity Employer/Veterans/Disabled Agency Disclaimer: Mitsubishi Logisnext Americas Inc. does not accept unsolicited resumes from third party vendors. Any unsolicited resumes from a third party will become the property of the company to use at the company’s discretion, with the understanding that Mitsubishi Logisnext Americas, Inc. will not be billed a fee for any such resumes. If a company is designated as an approved vendor, then said company can only provide assistance on those positions requested via a formal written agreement of support.

Mitsubishi Logisnext Americas Inc.

Electrical Engineer, Systems

SUMMARYThe Administrator is responsible for the overall daily management and operation of the clinic. The Administrator reports directly to first line regional operational management which may be an Area Director, Regional Director, or Vice President of Operations, depending on the region/demographics.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties and tasks may be assigned.GROWTH · Develop and implement processes for program growth in accordance with Company goals. · Plan/coordinate patient scheduling to assure timely acceptance of patients and effective staffing levels. · Implement clinical and operational processes to improve patient health and minimize hospitalizations and missed treatments. · Achieve financial targets to include budget, labor costs, supply costs and expenditures.OUTCOMES · Review all incident reports; make recommendations and take action relative to incidents as appropriate; report at monthly QAPI meeting. · Promote quality management program through education and involvement of staff and patients in outcomes as well as overall responsibility to achieve corporate goals for quality. Leads QAPI meetings and quality improvement committees. · Coordinate the functions of all departments and develop standards and methods of measuring patient care services, including a chronological record of services provided to patients as required by the ESRD Network Coordinating Council and Medicare. · Work with staff to maintain chronological, thorough, and appropriate documentation in the patient record of all treatments, activities, and communication with the patient, physician and other healthcare professionals. · Achieve program's target goals for patient outcomes in accordance with quality patient care and Company goals.OPERATIONAL&nbsp;READINESS· Knowledge of and remain current with federal, state, local laws and regulations, including health care professionals practice act requirements. · Assure that the clinic is in compliance with all applicable federal, state, and local laws and regulations and receives continuing certification from all statutory and regulatory agencies. · Develop, implement and follow up necessary Corrective Action Plans for internal and external surveys. · May assume Charge Nurse's responsibilities as needed. · Responsible for duties listed in Registered Supervising Nurse job description and nursing services policy # C-AD-0110 or must designate Registered Nurse meeting these qualifications. · May fulfill responsibility of facility CEO as delegated by Governing Body. · Conduct and/or participate in both formal and informal meetings with the governing body, Regional Director, Medical Director and the staff. Assure that appropriate staff meetings, in-service education meetings, and team patient care planning meetings are held monthly. Assure that Quality Assessment &amp; Performance Improvement Program is current at all times. · Establish, maintain, and submit all required records and reports concerning staff, patients, and the operational affairs of the center. · Plan, coordinate, and approve effective and efficient staffing to meet patient needs and regulations. · Oversee the maintenance of equipment and supplies to meet current laws and regulations.OPERATIONAL READINESS (cont.) · Continuously monitor to ensure that a safe and sanitary physical environment is maintained throughout the facility; that all equipment is maintained and functions properly; and that adequate and appropriate inventory levels of all supplies are available and used correctly. · Supervise the maintenance of equipment, building areas occupied by the center and other property belonging to the center. · Know and understand the water treatment and mechanisms of the equipment of the facility. · Assist, when necessary, with disinfection of equipment and supplies including bicarbonate delivery systems and dialysis machines.PARTNERSHIPS · Monitor all contractual agreements; update as needed with corporate oversight. · Maintain collaborative working relationship with Medical Director and physicians. · Establish and maintain a positive relationship with area hospitals, agencies, vendors and the community. · Actively promote GUEST customer service standards; develop effective relationships at all levels of the organization. · Respond effectively to inquiries or complaints.STAFF&nbsp;DEVELOPMENT/&nbsp;RETENTION · Ensure all staff meet required qualifications for position held and perform duties within limitations established by and in accordance with company policy/procedures, health care professionals practice acts, applicable state and federal laws and regulations. · Recruit, train, develop, and supervise all personnel. · Maintain effective personnel management and employee relations, including evaluating the performance of all personnel; approving and submitting all hours worked and counseling and disciplining employees. · Uphold management goals of corporation by leading staff in team concepts and promoting a team effort. · Effectively communicates expectations; accepts accountability and holds others accountable for performance.ADMINISTRATORState Specific RegulationsAlabamaIF DESIGNATED CEO FOR THE CLINIC, MUST: <ul><li> Hold at least a baccalaureate degree and has at least one (1) year of experience in a dialysis unit OR</li><li> Meets the qualifications for a qualified physician director or qualified registered supervising nurse.</li></ul>Georgia <ul><li> Hold at least a baccalaureate degree and has at least one (1) year experience in an end stage renal disease facility OR</li><li> Meets the qualifications for a physician director or a nurse responsible for nursing services for an end stage renal disease facility OR</li><li> Has been acting for at least two (2) years as a facility administrator for an end stage renal disease facility which has been certified for the federal Medicare program.</li></ul>Maryland IF NOT THE DESIGNATED CEO FOR THE CLINIC, MUST: <ul><li> Be 21 years old or older.</li><li> Possess a high school diploma or a high school equivalency diploma.</li><li> Have at least one (1) year of dialysis experience.</li><li> Have no criminal conviction or other criminal history that indicates behavior that is potentially harmful to patients, documented through either a criminal history records check or criminal background check completed within one (1) month before employment.</li></ul>New Jersey <ul><li> A baccalaureate degree from an accredited college or university and the equivalent of at least one (1) year experience in supervising renal dialysis services OR</li><li> Five (5) years full-time experience in the provision of renal dialysis services and documentation of supervisory experience for at least one (1) year.</li></ul>South Carolina <ul><li> Hold at least a baccalaureate degree or have a minimum of an associate degree in a health-related field with at least two (2) years experience in ESRD within the past five (5) years.</li></ul>Wyoming PERSON IN CHARGE OF THE OPERATION OF THE FACILITY TWENTY-FOUR (24) HOURS PER DAY AND IS:<ul><li> A physician OR</li><li> A Registered Nurse who has at least six (6) months of experience working in a renal dialysis center OR</li><li> An individual with a bachelors degree and one (1) year experience in health service administration, preferably in a renal dialysis center.</li></ul>REGISTERED SUPERVISING NURSEState Specific RegulationsGeorgia <ul><li> RN with twelve (12) months of experience in clinical nursing, and an additional six (6) months of experience in nursing care of the patient with permanent kidney failure or undergoing kidney transplantation, including training in and experience with the dialysis process OR</li><li> RN with eighteen (18) months of experience in nursing care of the patient with on maintenance dialysis, or the nursing care of the patient with a kidney transplant, including training in and experience with the dialysis process.</li><li> Where the RN responsible for nursing services is also in charge of self-care dialysis training, at least three (3) months of the total required dialysis experience is in training patients in self-care.</li></ul>New Jersey THIS POSITION IS CONSIDERED DIRECTOR OF NURSING SERVICES IN THE STATE OF NJ AND MUST:<ul><li> Have twelve (12) months full time experience in nursing supervision and/or nursing administration obtained in a hemodialysis setting within the last twenty-four (24) months.</li></ul>South Carolina THIS POSITION IS CONSIDERED DIRECTOR OF NURSING SERVICES IN THE STATE OF SC AND MUST: <ul><li> Be a registered nurse with at least eighteen (18) months of experience in clinical nursing, with at least six (6) months experience in care of patients with ESRD.</li></ul>Texas THIS POSITION ALSO MAY BE KNOWN AS THE DIRECTOR OF NURSING IN THE STATE OF TX AND MUST:<ul><li> Have at least eighteen (18) months experience as an RN, which includes at least twelve (12) months experience in dialysis within the last twenty-four (24) months; OR </li><li> Have at least eighteen (18) months experience as an RN, and holds a current certification from a nationally recognized board in nephrology nursing or hemodialysis.</li></ul>

U.S. Renal Care

Dialysis Facility Administrator

Description:We are committed to supporting at risk children and families providing them with tools and resources to help prevent children from experiencing child abuse, neglect and abandonment. We are a Christian agency that believes in living our mission, we provide Christ-centered care and support to children and families in need. In response to this community-wide challenge, Presbyterian Children's Homes and Services (PCHAS), provides 14 programs and services in 28 locations, in Missouri, Texas, and Louisiana, which provide children with permanent homes and adults with increased self-sufficiency. This is accomplished by the agency's commitment to “The PCHAS Way” which inspires the agency to be strength-focused, family-centered, and goal driven with every client. Benefits of serving children and families in need through PCHAS include competitive salaries, flex work schedules, paid time off, medical, dental and vision insurance options, voluntary life insurance options, paid holidays, and a generous 403(b) Retirement Plan (After 1 year of employment, PCHAS provides a 3% contribution and an additional 2:1 match up to an employee's 3% contribution). Status: Non-exempt Working Conditions: Position based at the PCHAS Administrative Offices in Austin. TX. Typical office setting and works at a desk. Equipment to be used includes a computer, phone, copy machine, letter folder, and fax machine. Position Summary: This position reports to, and supports, the Director of Marketing and Communications, and in addition, provides support to the Director of Development and the Information System Support Supervisor. A key responsibility of this position is serving as one of the agency's two receptionist, this one being based in Austin, TX. This position works closely with the Manager of Communications and the Coordinator of Digital Content, who are also based in Austin, TX. As a primary receptionist, this position answers incoming 1-800 phone calls and directing callers to the correct PCHAS department and staff member. Essential Job Functions<ul><li>Provides full-time coverage of the front desk with approved M-F hours (except during the summer schedule): 8:00 a.m. - 12:00 pm. and 1:00 p.m. – 5:00 p.m. </li><li>Professionally represents the organization while answering calls and greeting in-person visitors</li><li>Provides clerical support for Development fundraising events, including enrolling luncheon guests into the Events Module (on behalf of all development officers) by preparing Texas luncheon name tags, table assignments, and pledge packets. </li><li>Manages donor stewardship activities, including first time donor postcards, taking credit card donations, calling donors when their credit cards expire, and mailing coupons. </li><li>Maintains office supplies inventory (including letterhead) and submits request for new supplies.</li><li>Assists with scheduling first floor Austin office meeting space for development staff and shipping items from Austin to remote development and program locations.</li><li>Maintains the agency's phone script. </li><li>Processing approved thank you letters from the Vice President of Development</li><li>Coordinates all in-house development department mailing, and at times, with volunteers</li><li>Performs other duties as assigned.</li></ul>Requirements:Minimum high school graduate, with advanced training or college coursework with databases preferred. Experience working with Blackbaud NXT preferred. Minimum of 1-3 years of database management experience, preferably working for a non-profit organization preferred. Demonstrate initiative, efficient organization with time management skills and ability to set priorities. Must have good oral and written communication skills and able to maintain confidentiality in all areas related to the business, welfare and constituent information of the agency. Must have strong interpersonal skills to work effectively with staff throughout the agency. Other Requirements: Must hold a valid driver's license, have and maintain a risk-free driving record. Must be willing to undergo initial and periodic child abuse/neglect, criminal history, sexual offender, and childcare/elder care disqualification list screenings. As requested, must submit fingerprints for review by the state of your employment and Federal Bureau of Investigation (FBI). Must undergo a pre-employment drug screen and a pre-employment physical with the results showing no evidence of communicable disease. Christian Commitment: Presbyterian Children's Homes and Services is a faith-based Christian organization. We provide Christ-centered care and support to children and families in need. We strive to serve like Jesus. We meet our clients where they are and treat them with respect. We focus on our clients' strengths rather than their problems. And we encourage our clients to focus on their future rather than their past. When we do this well, we help our clients find hope and know the love of God. PI276728522

Administrative Support Specialist II

Responsibilities Description - External Howmet Aerospace’s Wichita Falls, TX facility has&nbsp;openings for&nbsp;Foundry Service Operator/Mold Handlers.&nbsp; Howmet is a world leader in the investment casting industry and is a leading supplier of superalloys, aluminum, and titanium components for aerospace, automotive, and commercial transportation applications.&nbsp; Our Wichita Falls location is on the front edge of the rapid growth in the aerospace and turbine industries.&nbsp;For more information, visit&nbsp;<a href="http://www.howmet.com/" target="_blank">www.howmet.com</a>. Follow @howmet:&nbsp;Twitter,&nbsp;Instagram,&nbsp;Facebook,&nbsp;LinkedIn&nbsp;and&nbsp;YouTube.&nbsp; Howmet Aerospace’s Wichita Falls, TX facility has an opening for&nbsp;Foundry Service/Mold Handler Operator. MUST BE ABLE TO WORK 12 HOUR ROTATING NIGHT SHIFTS, 7:00 P.M TO 7:00 A.M. (2 on 2 off, 3 on 2 off, 2 on 3 off)&nbsp; <ul> <li>Starting pay is at $23.33 tops out at $27.77 at 9 months.</li> <li>$1.00 shift differential</li> </ul> Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. &nbsp;Some of our benefits include: Paid vacation each year, based on length of service; paid holidays; 401(k) Retirement Savings Plan with company match of up to 6% of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, and a Employee Assistant Program. Must be able to work rotating shifts.&nbsp; This Opening will be on a 7:00 p.m. to 7:00 a.m. shift .&nbsp; Training may take place on days. JOB SUMMARY Works under general supervision and the direction of a caster to remove molds from the preheat furnace, properly position in timely manner for casting, perform wrap application, dewax, repair and mold inspect, and perform all post-cast operations specified. ESSENTIAL FUNCTIONS <ul> <li>Using Computers (entering information, etc.)</li> <li>Must be able to read and interpret Product Criteria (PC) and Activity Instructions (AI).</li> <li>Must be able to function as a member of a team and be able to work under general supervision.</li> <li>Must be able to maintain expected quality levels.</li> <li>Comply with all site required policies and procedures including but not limited to:&nbsp; EHS, Quality, Code of Conduct and the Wichita Falls Employee Handbook.</li> </ul> JOB RESPONSIBILITIES <ol> <li>Read all available instructions and assist caster to cast molds in accordance with established techniques and specific instructions on the Product Criteria, Mold Sheets, or Activity Instructions.</li> <li>Requires concentration for short periods of time when assisting in the acquisition of the proper alloy, checks preheat temperatures, handles the molds from the preheat furnace and again after casting, and accomplishes all specific post-cast operations (Mold hot topping, exothermic application and vermiculite encapsulation).</li> <li>Particularly responsible for proper mold positioning, lower chamber cleaning, and the control of variables affecting solidification and mold cooling.</li> <li>Moves empty, hot furnace trays, changes and cleans floor gaskets, performs heavy housekeeping required in department, and assists in minor equipment maintenance.</li> <li>Notifies caster of any torn wraps, bumped or leaking molds.</li> <li>Periodically required to load ovens.</li> <li>Keep updated on new methods on improvements.</li> <li>Must follow all safety practices and procedures.</li> <li>Rotates through each job duty as required.</li> <li>Locates scheduled work, moves trucks to proper work station.</li> <li>Ensures molds are kept clean in each area.</li> <li>Seals molds at dewax or mold inspection with either ceramic disk or rubber cap.</li> <li>Monitors operation of equipment and temperature controls.</li> <li>Must follow work instructions, SOP's, and activity instructions that govern each job task.</li> <li>Inspects and repairs molds.</li> <li>Prepares solutions and maintains supplies.</li> <li>Cuts required kaowool and roll board.</li> <li>Wraps molds per process releases/product criteria.</li> <li>Must be able to operate the required piece of mobile equipment for this area.</li> <li>Machines and work area are to be kept clean and in orderly condition.&nbsp; Supervisor is to be notified immediately of equipment or machinery malfunctions.</li> <li>Completes necessary paperwork as required.</li> <li>Verifies mold counts and paperwork correctness on lot travelers, or serial numbers at each operation.</li> <li>Loads molds in preheat oven.</li> <li>Performs other duties as required.</li> <li>Complies with all EHS rules related to the work environment.</li> <li>Works overtime when needed</li> </ol> ENVIRONMENTAL HEALTH AND SAFETY RESPONSIBILITES <ul> <li>Comply with all department, facility, corporate and regulatory EHS regulations</li> <li>Wear all required personal protective equipment (PPE).&nbsp;Requires Metatarsal Pull up Boots, Hearing protection, Hard Hats, Flame retardant clothing, Safety Glasses, gloves and Aluminized spats.</li> <li>Report all job-related illness and injuries (Per Employee Handbook).</li> <li>Report all safety, health and environmental concerns to your supervisor in a timely manner.</li> <li>Attend all EHS training.</li> </ul> Physical Demands/Equipment Used Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.&nbsp; <ul> <li>&nbsp;Employee is required to execute the following:</li> <li>Considerable physical effort is required when loading alloy.</li> <li>Reach for items nearby, far and overhead.</li> <li>Fine manipulation, using a keyboard and mouse.</li> <li>Lifting and carrying to the waist-to-chest high level, floor to waist and chest to overhead.</li> <li>Gripping Pinching and Handling.</li> <li>Climb Stairs and Ladders.</li> <li>Crawl, squat, balance, and sustain bending.</li> <li>Finger Press and tolerate hand/arm vibration.</li> <li>Be able to carry with one hand.</li> <li>Pushing, pulling and twisting.</li> <li>Be able to carry items with two hands.</li> <li>Moderate lifting from 25 lbs to 50 lbs.</li> <li>Requires almost constant standing and sufficient strength to lift, handle and transport heavy, hot molds, and hot molds containing molten alloy</li> <li>Must pass Jaeger 2 vision test annually for depth perception when pouring alloy and setting mold position.</li> </ul> Work Environment: (Chemical and Physical Exposures) <ul> <li>Extreme care must be taken because of exposure to extremely high temperatures for short periods of time.</li> <li>Exposure to dust and fumes from the casting process.</li> <li>Occasional exposure to uncontained molten metal sprays and solid metal chips from chamber cleaning.</li> <li>Exposure to Nickel and RCF.</li> <li>Requires wearing dust mask/respirator during certain procedures.</li> </ul> &nbsp; Qualifications&nbsp;Basic Qualifications:<ul> <li>High School Diploma or GED from an accredited institution.</li> <li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>PREFERRED QUALIFICATIONS:&nbsp;<ul> <li>Basic Computer skills.</li> <li>Foundry Service Operator/Mold Handler&nbsp;experience</li></ul>About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Howmet Aerospace

FS OP/MOLD HANDLER

ResponsibilitiesIndustrial EngineerHowmet Aerospace’s Wichita Falls, TX facility has an opening for an&nbsp;Industrial Engineer. Our Company’s&nbsp;strong values along with our leadership’s commitment provide the successful candidate an excellent environment to work and deliver results. This position is a key member of the location’s&nbsp;Facility Engineering and Maintenance Team.&nbsp;Job Responsibilities:This position develops, evaluates, and improves integrated systems for managing industrial production processes.&nbsp; They focus on optimizing processes, reducing waste, and ensuring efficiency in manufacturing, logistics, and other operational areas.&nbsp;Their work involves a combination of analytical, problem-solving, and communication skills to enhance productivity and minimize costs.&nbsp;<ul> <li>Works closely with Maintenance Leadership, Maintenance Technicians, Automation team and Facility Engineering Team to monitor maintenance activities with an eye toward improving productivity and efficiency.</li> <li>Designs efficient maintenance processes and workflows.&nbsp;</li> <li>Ensures maintenance and preventative maintenance activities are designed so that products meet quality standards.&nbsp;</li> <li>Identifies and reduces waste in maintenance activities.</li> <li>Plans maintenance and preventive maintenance schedules for evaluating efficiencies.&nbsp;</li> <li>Implements controls to monitor costs and minimize maintenance issues.&nbsp;</li> <li>Works with maintenance supervision and other departments to schedule maintenance activities.&nbsp;</li> <li>Works with Maintenance, Facility Engineering, and Automation to ensure spare parts inventory are adequate to support immediate repairs of critical equipment.&nbsp;</li> <li>Helps to develop activity instructions for maintenance personnel.&nbsp;</li> <li>Ensures that maintenance processes are safe and addresses safety issues and concerns. Enforces all safety, environmental, and health policies and procedures.&nbsp;</li> <li>Generates maintenance documentation and efficiency reports.&nbsp;</li> <li>Administrator of Maintenance Work Order System to ensure all work orders are coded, and issued correctly, provides data from work order archives as necessary and provides process measures of maintenance performance.&nbsp;</li></ul>Job Roles:<ul> <li>Systems thinker--sees the business and its operation holistically; understands actions and reactions; considers multiple pathways of potential effect before decisions; thinks strategically about interventions with an eye toward scale</li> <li>Optimizer--constantly challenging the organization to work smarter; supports others to ensure they have what they need to do their work successfully</li> <li>Anticipation--looks ahead to minimize potential issues and maximize advantages; prepares others for what comes next</li> <li>Operational accelerator--drives continuous improvement; understands ramifications of automation and other advances; advocates for safety, ergonomics and scalable solutions</li> <li>Organization and structure--works within existing structures while striving to improve and standardize them; provides accurate information; galvanizes others toward common goals</li> <li>Influence--leverages knowledge, relationship, data and perspective to persuade, educate and navigate; gains buy in and adoption of ideas and practices at scale; interacts with a variety of stakeholders</li> <li>Data informed--focused on things that drive quantifiable business outcomes; evaluates based on quantitative feedback; knows and explains the “why” behind actions</li> <li>Prioritized reaction--handles the unexpected without losing sight of important objectives; reacts where greatest leverage points exist</li> <li>Relationship--connects individually and with teams across shifts and practices; builds rapport and commonality; creates a “win together” ethic; serves as liaison between shop floor and engineering; keeps the pulse of the floor; helps people feel heard</li></ul>Skills and Qualifications:<ul> <li>Knowledge of production machinery, processes and standards in the field or industry</li> <li>Understanding of lean manufacturing and supply-chain management</li> <li>Familiarity with Statistical Process Control (SPC) and Just in Time (JIT) strategizing</li> <li>Critical thinking and problem-solving skills</li> <li>Data analytics skills and experience</li> <li>Attention to detail</li> <li>Understanding of ergonomics</li> <li>Project management skills</li> <li>Strong communication and presentation skills</li> <li>Organizational, planning and documentation skills</li> <li>Adept at using presentation software and presenting complex information to non-technical management personnel and other stakeholders</li> <li>Ability to work on multiple projects in various stages simultaneously&nbsp;</li> <li>Experience using computer-aided design (CAD) platforms or 3D modeling preferred</li></ul>QualificationsBasic Qualifications:<ul> <li>Bachelor’s degree in Industrial Engineering or related field such as mechanical or manufacturing engineering from an accredited institution.</li> <li>2 years of engineering or operations experience in a manufacturing environment.</li> <li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>Preferred Qualifications:<ul> <li>Strong foundation in engineering principles, including manufacturing processes, product design, ergonomics, and quality control.</li> <li>Ability to analyze complex problems, identify root causes, and develop effective solutions.</li> <li>Proficient in statistical analysis tools or other analytical techniques.</li> <li>Able to effectively communicate technical information to various audiences, verbally and in writing.</li> <li>Able to collaborate with other engineers, technicians, and professionals on projects.</li> <li>Experience managing and executing capital projects.</li> <li>Previous experience&nbsp;in Industrial Engineering.</li> <li>A high degree of interpersonal skills to motivate and influence others, including those not under their direct supervision.</li> <li>Experience with work design and work balancing.</li> <li>Able to perform time studies, document procedures and create standards.</li> <li>Analyze data to improve productivity and ergonomics while reducing costs, and removing bottlenecks, interruptions and other wastes.</li> <li>Proficient user of AutoCAD and AutoCAD Electrical.</li></ul>About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Industrial Engineer

<h3>Job Description:</h3>Fidelity Workplace Investing is seeking a Principal Data Scientist to support initiatives around personalization and customization. This position will work with technical professionals in engineering and with managers of market research and product development teams. The assignments may include exploratory analysis, feature engineering, experimentation, forecasting, numerical optimization, real time model and LLM.As Data Scientists, we support projects across many areas and ensure the highest degree of quality. You must be a great teammate who thrives in a small, highly effective work environment and communicates with confidence to all levels of Workplace Investing. The ideal Data Scientist handles projects from start to finish. i.e., they can work with website professionals on experimental design, gather required data in any shape and size, process it into useful features, train machine learning models, and assist technical teams to move models into production and measure business results.The Skills You Bring<ul><li>Statistical and data science programming with proficiency in Python and SQL. Experience writing testable, modular code.</li><li>Expert in training regression and classification models using typical ML algorithms, data extraction and feature engineering, creating model documentation, and explaining model output (such as features and performance) to non-technical audiences.</li><li>Extensive experience in developing and/or deploying scalable AI solutions using LLM, knowledge graph, reinforcement learning, optimization, and/or real-time models to solve business problems.</li><li>Independently lead data science projects from end to end. Conduct technical reviews and mentor junior data scientists.</li><li>Experiences in financial services and marketing a plus.</li><li>Committed to continuous learning and able to pick up new knowledge quickly.</li></ul>Education<ul><li>PhD with 2+ years of working experiences or Master’s Degree with 5+ years working experiences in a quantitative field (e.g. Statistics, Computer Sciences, Operational Research, Data Science or Applied Mathematics), with applied research experience.</li></ul>How Your Work Impacts the OrganizationData Scientists in Fidelity Workplace Investments use sophisticated machine learning and optimization to deliver personalized experiences to our customers. Your work will help participants learn how to plan for their financial future and prepare for impending life changes.<h3>Certifications:</h3><h3>Category:</h3>Data Analytics and InsightsFidelity’s hybrid working model blends the best of both onsite and offsite work experiences. Working onsite is important for our business strategy and our culture. We also value the benefits that working offsite offers associates. Most hybrid roles require associates to work onsite every other week (all business days, M-F) in a Fidelity office.Please be advised that Fidelity’s business is governed by the provisions of the Securities Exchange Act of 1934, the Investment Advisers Act of 1940, the Investment Company Act of 1940, ERISA, numerous state laws governing securities, investment and retirement-related financial activities and the rules and regulations of numerous self-regulatory organizations, including FINRA, among others. Those laws and regulations may restrict Fidelity from hiring and/or associating with individuals with certain Criminal Histories.

Fidelity Investments

Principal Data Scientist

<h3>Job Description:</h3>The Role We're looking for enthusiastic Cloud Engineers who are passionate, inquisitive, and responsible individuals to help us on our mission to deliver unified experiences to our customers. You will be working as a Developer, building tools to support cloud enablement; with a focus on achieving repeatable processes that deploy solutions of high value. As a Cloud Engineer at Fidelity, <ul><li>You will help us build the solutions to support and scale our capabilities. </li><li>You will be responsible to craft secure, scalable, resilient cloud-based services.</li><li>You'll have the opportunity to contribute ideas to improve our products as well as develop your skills, learn new technologies and languages, and continue to learn. </li></ul>A phenomenal cultural fit would be someone who embodies drive, confidence, genuinely cares about people-both customers and our associates, is obsessed with technology, crucial, and strategic in the larger scheme of things. The Expertise We’re Looking For <ul><li>A passion for technology and can navigate your way across complex and rapidly changing landscapes by staying on top of the latest trends and thrive by sharing knowledge. </li><li>A creator, a doer, and a disruptor who will help us solve real-life problems and meet real customer needs. You’ll be helping us build things, taking an idea, and creating rapid prototypes that are shippable and learn from real-life feedback. </li><li>A self-starter, who actively challenges status-quo, is curious and not afraid to ask “Why” and “What if”? </li><li>Experienced with the tools of the trade including a variety of modern programming languages and frameworks. </li><li>Works to stay up to date on Algorithms, Data Structures and Design Patterns and loves the challenge of building highly scalable systems that can support thousands of transactions/sec. </li><li>Have an approach of test first development and are experienced in modern test frameworks. We believe that quality is everyone’s job. </li><li>Are data-driven and can measure, collect and use data to make decisions. We understand the value of intuition and the need to balance decisions accordingly. </li><li>Have great communication skills and technical expertise to drive and participate in meaningful discussions. </li><li>Work closely with business units in re-engineering and automation efforts that result in impactful and significant straight thru processing, while developing best-in-class digital experiences for our customers and associates </li></ul>The Skills You Bring <ul><li>Hands-on experience with Software/Cloud Development and Engineering.</li><li>Application development on Public Cloud – e.g., AWS (Serverless (Lambda), EKS, Step Functions, Lambda, S3, Dynamo).</li><li>Skilled in Java, Spark, Python, Docker, Kubernetes, infrastructure as code</li><li>Proven experience working in a Cloud environment using AWS, Azure, Google etc. </li><li>Experience with AWS services, in particular, CloudWatch, IAM, Networking, and CloudFormation, Lambda,</li><li>Proven experience with DevOps, CI/CD using tools like Jenkins, uDeploy, Terraform, Cloud Formation etc.</li><li>Proven ability with modern Object-Oriented Programming Languages (Python, Scala, Java)</li><li>Strong working knowledge of cloud native data warehousing and data lake solutions using Snowflake, Redshift etc.</li><li>Database experience in DynamoDB, PostgreSQL, Oracle DB. </li><li>Intellectually curious and love learning new skills and technologies, e.g. Cloud services and programming languages</li><li>Certification in public Cloud (AWS) and Kubernetes is a plus. </li></ul>The Team Being technically competent is only telling half the story. We believe that delivering the best possible customer experience requires an artful blend of human ingenuity and technology. While we value smart technologists, we are fanatics about our culture that promotes autonomy and leadership at all levels. We believe that diversity in background and experience will foster an inclusive and engaging work environment for our employees. This ultimately enables us to deliver a better product for our customers. We gravitate toward those who demonstrate a curiosity to learn, are unafraid to break things, step up and take the lead, take ownership of their projects, and thrive by sharing knowledge and demonstrating our core pillars: <ul><li>Imagine. Innovate. Inspire: Nurture an inclusive organizational culture, foster positive energy &amp; family spirit, recognize greatness, support each other &amp; enjoy the journey. </li><li>Elevate the floor; Influence the horizontal: Commit to developing leadership at all levels. Help your peers &amp; team get better by raising standards within and around while maintaining a strong focus on building future leaders. </li><li>Tightly aligned; loosely coupled: Establish or enhance partnerships across the organization to ensure alignment towards enterprise standards, tools and reusability while providing direction for teams to operate autonomously. </li><li>Level Up on Craftsmanship: Treat learning as a journey not a destination. Commit to learning and teaching as a part of your life. </li><li>Build the "Best" Tech together: Promote innovation driven by purpose and practicing autonomy with responsibility. </li></ul><h3>Certifications:</h3><h3>Category:</h3>Information TechnologyFidelity’s hybrid working model blends the best of both onsite and offsite work experiences. Working onsite is important for our business strategy and our culture. We also value the benefits that working offsite offers associates. Most hybrid roles require associates to work onsite every other week (all business days, M-F) in a Fidelity office.Please be advised that Fidelity’s business is governed by the provisions of the Securities Exchange Act of 1934, the Investment Advisers Act of 1940, the Investment Company Act of 1940, ERISA, numerous state laws governing securities, investment and retirement-related financial activities and the rules and regulations of numerous self-regulatory organizations, including FINRA, among others. Those laws and regulations may restrict Fidelity from hiring and/or associating with individuals with certain Criminal Histories.

5,100 Jobs in Texas