field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

Essential Duties and Responsibilities include the following. Other duties and tasks may be assigned.<ul><li>Demonstrate effective use of supplies and staff labor hours.</li><li>May assist with billing log preparation and updates.</li><li>Perform duties as assigned to meet the patient care or operational needs of the clinic</li><li>Obtain blood samples for laboratory analysis as required to complete physician orders.</li><li>Complete and document monthly review of patient medication profiles.</li><li>Knowledge of and comply with applicable health care professionals practice act requirements.</li><li>Perform duties at all times under the supervision of a Charge Nurse and within limitations established by and in accordance with company policy and procedures, applicable state and federal laws and regulations</li><li>Maintain thorough, accurate, and appropriate documentation in the patient record of all treatments, activities, and communication with the patient, physician and other healthcare professionals to include progress reports.</li><li>Report any significant information or change in patient condition to the Charge Nurse.</li><li>Report machine problems to Biomedical Technician and Administrator.</li><li>Participate in staff meetings as required. Attend in-service and continuing education offerings in compliance with company policy and procedure.</li><li>Assist with staff training as requested.</li></ul>

U.S. Renal Care

LVN/LPN - National - In-Person Hiring Event!

<h4>How you'll change lives</h4>As a Registered Nurse (RN) at US Renal Care, you'll be an integral part of a cross-functional team, working under the supervision of a Charge Nurse and assisting and supervising Patient Care Technicians (PCTs) to care for patients living with kidney disease.<h4>What you'll be doing</h4>Patient care. You'll work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include completing and documenting physical assessments before and after treatments and monitoring patients during treatment. You'll ensure quality renal care by completing monthly reviews of patient medication profiles and administering medications according to physician orders. Teamwork. You'll be a critical member of an interdisciplinary team to provide all required patient assessment and care planning activities. You'll also make sure center staffing requirements are met at all times under the direction of the Administrator and according to state regulations for staffing ratios.Safety &amp; Quality. Working under the supervision of a Charge Nurse, you'll adhere to all company policies and procedures and state and federal laws and regulations. You'll participate in all required staff meetings and continuing education offerings.

Registered Nurse - National

The RN Charge Nurse is responsible for overseeing nursing services each shift and functions as a nursing supervisor. This position provides daily supervision of staff on duty during operational hours.Essential Duties and Responsibilities include the following. Other duties and tasks may be assigned.<ul><li> Assist with clinical and operational processes to improve patient health and minimize hospitalizations and missed treatments.</li><li> Demonstrate effective use of supplies and staff labor hours.</li><li> Complete and document monthly review of patient medication profiles. Administer medications as ordered by the physician.</li><li> Assist physician during patient rounds and transcribe and implement physician orders timely.</li><li> Assist with the implementation of anemia management and medication protocols as requested.</li><li> Knowledge of and comply with federal, state, local laws and regulations, including health care professionals practice act requirements.</li><li> Perform duties at all times within limitations established by and in accordance with company policy and procedures, applicable state and federal laws and regulations.</li><li> May give direct patient care to the extent of performing efficient, safe dialysis, if allowed by state regulations.</li><li> Responds to all emergencies in clinic.</li><li> Communicate results of patient assessment, reassessment, and ongoing monitoring to the physician, team members, and others as appropriate to the individual needs of the patient.</li><li> Maintain collaborative working relationship with Medical Director and physicians.</li><li> Participate as a member of the Interdisciplinary team in all required patient assessment and care planning activities.</li><li> Assist in orientation of new staff as a preceptor or in assigning a preceptor.</li><li> Acts as resource person and participates in implementing and evaluating dialysis services and assures that policies and procedures are updated.</li><li>Assists Administrator in interviewing, hiring, evaluating, and disciplinary actions of center staff</li></ul>

Dialysis Registered Charge Nurse

Grocery Cart Attendant • Part Time • Dierbergs Markets Grocery Cart Attendants are helpful and on-the-go, assisting cashiers with loading carts, and helping the store run smoothly. They are important in making a first (and lasting) customer experience with a variety of responsibilities: <ul><li>Retrieve carts from the parking lot using a cart strap and safety vest</li><li>Offer to carry out and load purchases into customers' vehicles</li><li>Pick up and dispose of debris from the carts, floor and parking lot</li><li>Distribute hand baskets around the store</li><li>Put misplaced or returned items in their proper locations</li><li>Assist in maintaining aisle conditions</li><li>Help to keep check lanes organized and stocked with essentials, such as paper and plastic bags</li><li>Sweep and mop floors when maintenance is not available</li><li>Assist Cashiers with change requests, cash "turn ins" to the Guest Services, and obtaining additional items</li><li>Obtain and load the carpet cleaning rental machine into customer's car</li><li>Maintain quality of customer's items by loading purchases into carts and ensuring use of proper bagging techniques</li><li>Stock advertisements</li></ul> What you need to succeed <ul><li>At least 16 years of age</li><li>Physical stamina to lift up to 30 pounds, retrieve carts from outside and load groceries in to customers carts</li><li>Ability to work outside in varying weather conditions</li><li>Flexibility to work a varied schedule that includes weekends and holidays</li><li>Prompt and regular attendance based on your schedule</li><li>Adherence to our dress code, appearance and personal hygiene standards</li><li>Must be able to tolerate environmental changes and exposure to hot and cold temperatures caused by frequent trips to the parking lot to service customers and retrieve carts under varying weather conditions</li></ul> Physical Requirements <ul><li>Pushing &amp; Pulling- up to 30 lbs. of force frequently</li><li>Lifting - up to 40lbs.</li><li>Work actions include standing, walking, bending, reaching, and squatting</li></ul> What's in it for you? <ul><li>Weekly paychecks - yes, we are going to pay you every single week!</li><li>Medical insurance, 401(k), pension plan, and paid time off - even for part-time Associates</li><li>Automatic, scheduled pay increases to reward your awesome performance</li><li>Work/life balance and flexible scheduling</li><li>Training and growth potential to help you reach your career goals with us</li><li>Discounts at the Starbucks kiosks inside some of our locations</li><li>Wellness initiatives, Associate appreciation and volunteer opportunities to keep you engaged and involved</li></ul> Foundational Embody and BE the following: Be Connected, Be Curious, Be Courageous, Be Caring, Be People Centric, Be a Contributor, Be a Cultivator, and in all you do, Be YOU! This job description is representative only and is not all inclusive of the responsibilities that the Associate may be required to perform.

Dierbergs Markets Inc

Grocery Cart Attendant

Janitorial Associate • Part &amp; Full-Time Opportunities • Dierbergs Markets Janitorial Associates keep our stores clean and running at the highest level. They are independent and have a strong attention to detail which helps with their responsibilities: <ul><li> Perform a wide range of cleaning and general store maintenance functions in order to keep the store clean and presentable for customers </li><li> Respond quickly to intercom requests for maintenance help and cleanups </li><li> Ensure that both indoor and outdoor areas are presentable at all times </li><li> Safely and efficiently operate general cleaning equipment such as a scrubber, buffer and trash compactor (must be at least 18 years of age to operate trash compactor) </li><li> Monitor and clean aisles, offices, and restrooms using company approved cleaning supplies </li><li> Performs minor repairs using hand tools and routine replacements, such as changing light bulbs </li><li> Work safely to prevent on-the-job injuries by following OSHA regulations </li><li> Complete wet and dry cleanups </li><li> Select proper cleaning solutions for various surfaces </li><li> Hang banners and promotional items that require use of ladder </li><li> Maneuver and tip trash cart </li></ul> Essentials <ul><li> At least 16 years of age </li><li> Strong attention to detail and ability to safely use cleaning chemicals, requiring an understanding of chemical names and product labels </li><li> The ability to install banners and promotional items requiring the use of a ladder </li><li> Read basic information (ex: chemical names and product labels </li><li> Ability to work independently </li><li> Flexibility to work a varied schedule that includes weekends and holidays </li><li> Prompt and regular attendance based on your schedule </li><li> Adherence to our dress code, appearance and personal hygiene standards </li><li> Associates in food handling departments are required to receive a Hepatitis A vaccination (MO only) </li></ul> Physical Requirements <ul><li> Lifting &amp; Carrying - Up to 50 lbs. occasionally </li><li> Pushing &amp; Pulling - Up to 50 lbs. of force occasionally </li><li> Occasional - Sit, handling, crawling, climbing, overhead reach, &amp; power grip </li><li> Frequent - Stand, walk, head turn, kneel, stoop, squat, forward reach, side reach, grasp, pinch, finger manipulation, &amp; feel </li></ul> What's in it for you? <ul><li>Weekly paychecks - yes, we are going to pay you every single week!</li><li>Medical insurance, 401(k) and paid time off - even for part-time Associates</li><li>Automatic, scheduled pay increases to reward your awesome performance</li><li>Work/life balance and flexible scheduling</li><li>Training and growth potential to help you reach your career goals with us</li><li>Discounts at the Starbucks kiosks inside some of our locations</li><li>Wellness initiatives, Associate appreciation and volunteer opportunities to keep you engaged and involved</li></ul> Foundational Embody and BE the following:Be Connected,Be Curious,Be Courageous,Be Caring,Be People Centric,Be a Contributor,Be a Cultivator, and in all you do,Be YOU! This job description is representative only and is not all inclusive of the responsibilities that the Associate may be required to perform.

Janitorial Associate

Produce Associate • Part-Time • Dierbergs Markets Produce Associates work as part of a team to provide our customers with quality products and information about our vast selection. They are friendly, proactive, and help make a positive impact on our store success with their responsibilities: <ul><li> Assist with stocking, display, food prep, truck unloading, quality control and inventory </li><li> Greet customers and share your knowledge of the department's vast selection of items </li><li> Use suggestive selling techniques to promote products </li><li> Safely and efficiently operate and maintain equipment such as code gun, wrapper, scale, knives, microwave oven, lettuce chopper, pineapple corer, pallet jack, and baler (must be at least 18 to operate pallet jack and baler) </li><li> Ensure that our beautiful Produce department is well-stocked and looks showroom-worthy </li><li> Price packaged products by using label machine </li><li> Recondition items returned from the sales floor </li><li> Disassemble, clean, and reassemble produce cases </li><li> Display merchandise to attract customers and promote sales </li><li> Take orders from customers for special products using the Dierbergs Party Guide (ex: gift baskets) </li><li> Wash utensils, pots, and pans using detergent in a deep sink </li><li> Work in 45-to-55-degree preparation area and access 36-degree cooler </li><li> Follow safe food handling guidelines whenever preparing food, according to S.A.F.E. program standards </li></ul> Essentials <ul><li> At least 16 years of age </li><li> Basic math and computer skills (including addition, subtraction, multiplication, and division) </li><li> Ability to work in varied temperature-controlled environments (36-degree cooler and 45-degree prep area). This position involves repeated heavy lifting. </li><li> Ability to follow safe food-handling guidelines and keep your work area safe and clean </li><li> Multi-task and work as part of a team </li><li> Flexibility to work a varied schedule that includes weekends and holidays </li><li> Prompt and regular attendance based on your schedule </li><li> Adherence to our dress code, appearance, and personal hygiene standards </li><li> Associates in food handling departments are required to receive a Hepatitis A vaccination (MO only) </li><li> You may be cross-trained in other departments </li></ul> Physical Requirements <ul><li> Lifting &amp; Carrying - Up to 50 lbs. occasionally </li><li> Pushing &amp; Pulling- Up to 50 lbs. of force occasionally </li><li> Occasional - Sit, kneel, stoop, squat, climb, overhead reach &amp; power grip </li><li> Frequent - Stand, walk, head turn, side reach, grasp, pinch, finger manipulation &amp; feel </li><li> Constant - Handling &amp; forward reach </li></ul> What's in it for you? <ul><li>Weekly paychecks - yes, we are going to pay you every single week!</li><li>Medical insurance, 401(k) and paid time off - even for part-time Associates</li><li>Automatic, scheduled pay increases to reward your awesome performance</li><li>Work/life balance and flexible scheduling</li><li>Training and growth potential to help you reach your career goals with us</li><li>Discounts at the Starbucks kiosks inside some of our locations</li><li>Wellness initiatives, Associate appreciation and volunteer opportunities to keep you engaged and involved</li></ul> Foundational Embody and BE the following:Be Connected,Be Curious,Be Courageous,Be Caring,Be People Centric, Be a Contributor, Be a Cultivator, and in all you do,Be YOU! This job description is representative only and is not all inclusive of the responsibilities that the Associate may be required to perform.

Produce Associate

ResponsibilitiesAbout Howmet Aerospace:&nbsp;Howmet Aerospace has an opening for a Paint and Coatings Operator in our Tucson, AZ location.&nbsp;Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow:&nbsp;<a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>,&nbsp;<a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>,&nbsp;<a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>,&nbsp;<a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and&nbsp;<a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>.Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.Specific Responsibilities include:&nbsp;<ol> <li>Responsible for operating the Vector and Dye Point machines to meet customer requirements.</li> <li>Solid interpersonal and communication skills</li> <li>Able to lift/move up to 30 pounds&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li> <li>Assists with inspecting components to the proper customer and production specifications</li> <li>Perform housekeeping duties on a regular basis as necessary&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li> <li>Prepare daily production reports and forms&nbsp;&nbsp;</li> <li>Assists other operators with processing activities such as components weight counting, parts movement between location&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li> <li>Adheres to Howmet EH&amp;S, Quality, and other company policies&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li> <li>Attention to detail and strong communication skills are required.&nbsp; Previous experience within a manufacturing environment is desired or have a background working with machinery.&nbsp; Prefer previous hands-on experience using measuring tools such as micrometers and calipers and reading blueprints.&nbsp;</li></ol>QualificationsHigh School Diploma or GED from an accredited institution preferredEmployees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. &nbsp;ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.Entry level position.&nbsp; Attention to detail and strong communication skills are required.&nbsp; Previous experience within a manufacturing environment is desired or have a background working with machinery.&nbsp; Prefer previous hands-on experience using measuring tools such as micrometers and calipers and reading blueprints.&nbsp;&nbsp;This position will physically require the incumbent to perform duties standing, walking, overhead reaching, lifting (35 – 40lbs), pushing and pulling totes, and leaning over machines, all equally on a regular basis.About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

Paint and Coating Operator 3rd Shift

ResponsibilitiesHowmet Engines seeks an experienced professional to join our team! &nbsp;The Operational Excellence Manager will apply Lean Manufacturing and other continuous improvement initiatives to manage the physical infrastructure of the plant and its equipment. This includes the design, installation, operation, maintenance, modification, construction, safety, and protection of the physical facilities and equipment used to manufacture technologically sophisticated products.&nbsp;Primary Responsibilities<ul> <li>Lead by example that safety is a way of life</li> <li>Lead / Manage the Maintenance and/or Facilities Engineering teams</li> <li>Drive asset utilization.&nbsp; Shorten cycles, minimize downtime, and keep equipment running. Utilizes 8 pillars of TPM.</li> <li>Minimize unplanned equipment downtime and maximize equipment reliability by employing TPM and other Lean initiatives</li> <li>Ensure Facilities Engineering metrics are well-known, and track progress toward achieving department objectives</li> <li>Establish project goals, and lead the group effort toward successfully completing those projects</li> <li>Manage maintenance and repair budgets</li> <li>Contribute to cross-functional continuous improvement initiatives for safety, on-time delivery, production efficiency, and scrap reduction</li> <li>Develop the capabilities of those in the department through teaching, coaching, establishing high standards, and ensuring accountability</li> <li>Exhibit and promote an attitude on the plant floor that leads to an engaged and energized workforce</li> <li>Advise, assist and review all matters involving capital and major expenses. Review and edit all requests for assets (RFA) and author those pertaining to the facility</li> <li>ASAT management</li> <li>Represent Howmet at community planning boards</li> <li>Daily help manage parts and expedite parts as necessary.</li> <li>Troubleshoot equipment – sense of urgency.</li> <li>Daily review of PM’s equipment down with team.</li> <li>ASAT – audits and improvements.</li></ul>QualificationsBasic Qualifications<ul> <li>Bachelor's Degree from an accredited institution</li> <li>Minimum of Seven (7) years experience in a facilities role</li> <li>Three (3) years of experience in a management capacity</li> <li>In lieu of degree, HS Diploma or GED from an accredited institution plus 10 years of related experience will be accepted</li> <li>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee</li> <li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>PREFERRED QUALIFICATIONS<ul> <li>Six Sigma Green Belt preferred.</li> <li>Bachelor’s degree in Engineering from an accredited institution highly desired.</li> <li>Prior experience working in a manufacturing setting in a Maintenance Supervisor&nbsp;or Manager role is preferred.</li></ul>Other Skills/Abilities<ul> <li>Strong mechanical and electrical aptitude.</li> <li>Ability to communicate effectively (verbal and written) and to present organized information to managers, customers and colleagues.</li> <li>Ability to effectively supervise and manage others.</li> <li>Hands-on Self-starter, exhibits initiative, responsibility, and flexibility.</li> <li>Proficient computer skills (MS Word, Excel, PowerPoint, Outlook, CMMS systems, report writing);</li> <li>May need to occasionally work flexible hours including night and weekends with little advanced notice.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Operational Excellence Manager

ResponsibilitiesHowmet Engines seeks an experienced professional to join our team! &nbsp;The Continuous Improvement Senior Manager at Howmet Aerospace is responsible for driving the plant's implementation and sustained use of Lean principles, enhancing operational efficiency and fostering a culture of continuous improvement. &nbsp; This role serves as a teacher, coach and mentor, working closely with employees at all levels to build long-term adoption of CI practices. &nbsp; &nbsp;The Continuous Improvement Senior Manager aligns improvement initiatives with business objectives, ensuring measurable impact on productivity, capacity and overall plant performance. &nbsp;Primary Responsibilities<ul> <li>Lead the continued development and enhancement of the Howmet Business System journey, including accelerating the Lean Execution Systems Assessment process and progress, working with plant teams on gap closure plans in support of advancing the CI culture across the organization.</li> <li>Facilitate the Howmet Business System “HBS” journey best practice sharing within the location and across teams through a sustainable electronic system that allows users to search for common issues or problems.&nbsp;</li> <li>Lead OEE improvement actions deep dive with leaders and provide avenues for best practice sharing.&nbsp;</li> <li>Lead Howmet Business System implementation of continuous improvement initiatives and drive waste reductions utilizing Lean principles (JIT, Autonomation, Value Stream Mapping, Kaizen, 5S, Standard Work, Line/Cell Design, Single Piece Flow, Material Flow, Visual Management, SMED, TPM, Root Cause Problem Solving, etc.)</li> <li>Facilitate Hoshins, Kaizens, problem solving, and rapid improvement process events with internal personnel at all levels of the organization, consultants, customers, and suppliers as needed. This includes providing support to sustain all follow-throughs required to sustain the improvements initiated during those events, especially those concentrated on local improvement. &nbsp;</li> <li>Understand and analyze Profit and Loss (P&amp;L) statements to identify opportunities for cost reduction, revenue enhancement, and margin improvement. Lead and collaborate with cross functional internal teams focused on shop floor factory improvements, which could include CAPEX.</li> <li>Assist team leaders in team skill and knowledge development to support meeting management goals, project management, improvements, results measurements, problem solving and related team skills.</li> <li>Monitor key performance indicators (KPIs) to track progress and measure the impact of improvement initiatives.</li> <li>Drive change management efforts to ensure successful implementation and sustainability of process improvements.</li> <li>Identify and share best practices, lessons learned, and success stories to promote knowledge sharing and continuous learning within the organization.</li> <li>Provide coaching and mentorship to team members across the organization to drive the Continuous Improvement mindset.</li> <li>May participate or lead other targeted initiatives or kaizens as directed by the BU, as defined by the Director.</li> <li>Role may support other sites’ continuous improvement activities, as needed (e.g., training, project-based work, best practice support, etc.)</li></ul>QualificationsBasic Qualifications:<ul> <li>Minimum 7 years of experience in manufacturing environments in areas such as: Operations, Engineering, Supply Chain, Quality, or Operational Excellence</li> <li>Minimum of 5 years in leadership roles in Operations or Continuous Improvement</li> <li>Previous experience in an aerospace, automotive or other manufacturing environment requiring significant lean strategies to maintain wins and propel the organizations’ success through Continuous Improvement</li> <li>Bachelor’s Degree from an accredited institution</li> <li>Strong working knowledge and understanding of Continuous Process Improvement methodologies such as Lean and Six Sigma.</li> <li>Strong working knowledge of Microsoft Office Suite, including Word, Excel and PowerPoint.</li> <li>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee</li> <li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>Preferred Qualifications:<ul> <li>Bachelor’s Degree and Master's Degree from an accredited institution in Engineering or Supply Chain field of study highly desired</li> <li>Project Management certification or earned certificate&nbsp;</li> <li>Experience developing operations leadership development programs in a manufacturing environment&nbsp;</li> <li>Demonstrated experience in manufacturing improvement techniques, including hoshin, flow principles, Jidoka, Kanban, 5S, and “plan for every part” (PFEP).</li> <li>Strong skills in value stream mapping and associated improvement methodologies.</li> <li>Understanding of pillars of Toyota production system (JIT, Jidoka).</li> <li>Experience evaluating TAKT time vs. cycle time, determining work area constraints (i.e. cycle time constraint, periodic work constraints, downtime constraints).</li> <li>Experience on the shop floor, working with employees, and enhancing manufacturing processes.</li> <li>Strong interpersonal and communication skills require the ability to resolve conflicting interests and obtain cooperation.</li> <li>Strong analytical and problem-solving skills: able to develop and use structured approaches to identify root causes and recommend resolutions.</li> <li>Demonstrated experience in project leadership and project management skills, with ability to manage multiple projects simultaneously to meet objectives and key deadlines.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Continuous Improvement Senior Manager

ResponsibilitiesHowmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. Howmet Dover Casting is a world-class supplier of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets.Howmet Aerospace is currently looking a&nbsp;Production Supervisor NDT on 1st Shift to join our&nbsp;Casting Facility located in Dover, New Jersey.&nbsp;Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. Some of our benefits include: Paid vacation each year, based on length of service; 13 paid holidays per year; 401(k) Retirement Savings Plan, company may match a percentage of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, Employee Assistance Program (EAP), Tuition Assistance Program; Free fitness center membership; Shift premium.The position will direct and motivate the manufacturing work force to produce products of high quality in the most efficient and safe manner and ensure that scheduling meets business and customer needs.&nbsp;Anticipated Pay Range: $80k-$100k &nbsp;per year.&nbsp; *Pay rates within this range are determined based on various factors including experience, education, certifications, etc.JOB SUMMARYThis position will be responsible for performing an assortment of tasks in a highly engineered manufacturing environment and provide leadership and strategic guidance for the achievement of operational goals.ENVIRONMENTAL HEALTH &amp; SAFETY RESPONSIBILITIES&nbsp;<ul> <li>Expected to assist in the implementation of Howmet Aerospace’s value and policy statement and its accompanying principles.</li> <li>Comply with all department, facility, Corporate and Regulatory EH&amp;S regulations.</li> <li>Wear all required personal protective equipment.</li> <li>Report all job-related illness and injuries. (Per employee handbook).</li> <li>Report all Safety, Health &amp; Environmental concerns to your supervisor in a timely manner.</li> <li>Attend all EH&amp;S training.</li></ul>JOB RESPONSIBILITIESEssential Job Functions<ul> <li>Partner with other functions within the facility to achieve business goals;</li> <li>Responsible for cost control and department budget to meet plant financial commitments;</li> <li>Prioritize, guide, and facilitate activities of the manufacturing function to meet department goals, initiatives, and requirements;</li> <li>Establish and maintain uniform manufacturing performance metrics and reporting systems;</li> <li>Actively work to introduce Lean Manufacturing concepts;</li> <li>Oversee the development of standard policies, procedures, and practices to ensure customer requirements are embodied in the manufacturing;</li> <li>Manage employee relations for the department;</li> <li>Ensure policies and procedures are followed;</li> <li>Lead improvements by promoting best practice methodologies and new technologies.</li> <li>Responsible for the training and development within group.</li></ul>JOB SPECIFICATIONS<ul> <li>Proficiency with Microsoft Office applications;</li> <li>Ability to communicate effectively with all levels of the organization;</li> <li>Ability to foster collaborative culture within team;</li> <li>May be required to work flexible hours including nights and weekends on occasion.</li></ul>BASIC QUALIFICATIONS<ul> <li>A minimum of three years of experience as a supervisor in a manufacturing environment.</li> <li>High School Diploma or GED from an accredited institution;</li> <li>This position is subject to the International Traffic and Arms Regulations (I.T.A.R.) which requires U.S. persons status. ITAR defines U.S. persons as U.S. Citizens, U.S. Permanent Residents (Green Card Holder), Political Asylee, or refugee;</li> <li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>PREFERRED QUALIFICATIONS<ul> <li>3 years of experience as a supervisor</li> <li>Internal Candidates) A minimum of two years of experience working in a Howmet Aerospace plant/facility</li> <li>Bachelor's degree from an accredited institution;</li> <li>Six Sigma Green or Black Belt;</li> <li>Experience working with lean manufacturing.</li></ul>PHYSICAL DEMANDS/EQUIPMENT USED&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<ul> <li>Ability to stand/walk for several hours each day;</li> <li>Ability to lift/carry up to 25lbs on occasion;</li> <li>This is not a temperature-controlled work environment;</li> <li>May be required to wear PPE including eye and hearing protection, metatarsal safety boots.</li></ul>MENTAL REQUIREMENTS<ul> <li>Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists;</li> <li>Ability to interpret a variety of instructions/guidelines.</li></ul>RELOCATIONRelocation benefit maybe offered for this position.DisclaimerThe above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.QualificationsHowmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. Howmet Dover Casting is a world-class supplier of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets.Howmet Aerospace is currently looking a&nbsp;Production Supervisor NDT on 1st Shift to join our&nbsp;Casting Facility located in Dover, New Jersey.&nbsp;Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. Some of our benefits include: Paid vacation each year, based on length of service; 13 paid holidays per year; 401(k) Retirement Savings Plan, company may match a percentage of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, Employee Assistance Program (EAP), Tuition Assistance Program; Free fitness center membership; Shift premium.The position will direct and motivate the manufacturing work force to produce products of high quality in the most efficient and safe manner and ensure that scheduling meets business and customer needs.&nbsp;Anticipated Pay Range: $80k-$120k &nbsp;per year.&nbsp; *Pay rates within this range are determined based on various factors including experience, education, certifications, etc.JOB SUMMARYThis position will be responsible for performing an assortment of tasks in a highly engineered manufacturing environment and provide leadership and strategic guidance for the achievement of operational goals.BASIC QUALIFICATIONS<ul> <li>A minimum of three years of experience as a supervisor in a manufacturing environment.</li> <li>High School Diploma or GED from an accredited institution;</li> <li>This position is subject to the International Traffic and Arms Regulations (I.T.A.R.) which requires U.S. persons status. ITAR defines U.S. persons as U.S. Citizens, U.S. Permanent Residents (Green Card Holder), Political Asylee, or refugee;</li> <li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>PREFERRED QUALIFICATIONS<ul> <li>3 years of experience as a supervisor</li> <li>Internal Candidates) A minimum of two years of experience working in a Howmet Aerospace plant/facility</li> <li>Bachelor's degree from an accredited institution;</li> <li>Six Sigma Green or Black Belt;</li> <li>Experience working with lean manufacturing.</li></ul>PHYSICAL DEMANDS/EQUIPMENT USED&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<ul> <li>Ability to stand/walk for several hours each day;</li> <li>Ability to lift/carry up to 25lbs on occasion;</li> <li>This is not a temperature-controlled work environment;</li> <li>May be required to wear PPE including eye and hearing protection, metatarsal safety boots.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

26,147 Jobs