field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

Our state-of-the-art investment casting facility in La Porte, Indiana is seeking a Manufacturing Engineer to join our team.&nbsp;Nestled halfway between South Bend and Chicago, our facility in La Porte, Indiana supplies jet engine components to some of the most trusted names in the Aerospace industry.&nbsp;This position will apply Lean Manufacturing and other continuous improvement initiatives while leading a large segment of our manufacturing process. Job Responsibilities include: <ul><li>Prioritize, guide, and facilitate the activities of the manufacturing function to meet organizational goals, initiatives and requirements.</li><li>Work with Operations, Engineering, Planning and Facilities to identify and remove bottlenecks in the manufacturing process.&nbsp;</li><li>Lead cross-functional continuous improvement initiatives for safety, on-time delivery, production efficiency, and scrap reduction.</li><li>Establish and maintain manufacturing performance metrics throughout the departments.</li><li>Ensure operations metrics are well-known and tracked on a daily basis to achieve manufacturing and plant objectives.&nbsp;</li><li>Establish reporting systems for the different manufacturing metrics.</li><li>Oversee the development of standard policies, procedures and practices to ensure customer requirements are embodied in manufacturing processes.</li><li>Reaffirm existing production goals, or establish new goals, and lead the group effort to achieve those goals.</li><li>Develop the capabilities of those in the department through teaching, coaching, establishing high standards, and ensuring accountability.</li><li>Exhibit and promote an attitude on the plant floor that leads to an engaged and energized workforce.</li><li>Drive improvements by developing and implementing systems and procedures based on data analysis.</li><li>Utilize best practice methodologies and develop new technologies.</li><li>Perform other work-related duties as assigned.</li></ul> ENVIRONMENTAL HEALTH &amp; SAFETY RESPONSIBILITIES <ul><li>Expected to assist in the implementation of EHS Values and policy statements and accompanying principals.</li><li>Comply with all department, facility, corporate and regulatory EHS regulations.</li><li>Wear all required personal protective equipment (PPE).</li><li>Report all job-related illness and injuries (Per Employee Handbook).</li><li>Report all safety, health and environmental concerns to your supervisor in a timely manner.</li><li>Attend all EHS training.</li></ul> BASIC QUALIFICATIONS <ul><li>BS Degree in Mechanical, Industrial, Manufacturing or Applied Engineering from an accredited institution.</li><li>Minimum of three years’ experience within a manufacturing environment.&nbsp;</li><li>Employees must be legally authorized to work in the United States.&nbsp;Verification of employment eligibility will be required at the time of hire.&nbsp;Visa sponsorship is not available for this position.</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul> PREFERRED QUALIFICATIONS <ul><li>A strong technical understanding of Production KPIs.</li><li>Strong analytical skills using Excel, Minitab and or other statistical software.&nbsp;</li><li>AutoCAD, SolidWorks and or other 3D modelling tools experience.&nbsp;</li><li>Strong leadership skills that foster an engaged employee environment.</li><li>Previous experience with change management.</li><li>Demonstrated results in leading manufacturing excellence.</li><li>A strong technical understanding of manufacturing processes.</li><li>Strong communication, interpersonal, organizational and negotiation skills.</li><li>Strong mechanical aptitude.</li><li>Experience in the investment casting industry a plus. </li></ul> Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

Manufacturing Engineer

We’re currently seeking a highly motivated and energetic person to join our team as a Quality Engineer at our Howmet Fastening Systems (HFS) manufacturing facility in City of Industry, CA.; a business unit within Howmet Aerospace, a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. &nbsp;Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit <a href="http://www.howmet.com" target="_blank">www.howmet.com</a>. Follow @howmet: Twitter, Instagram, Facebook, LinkedIn and YouTube. Specific Responsibilities Include: <ul><li>Performs Customer Purchase Order/Contract Reviews to identify quality requirements for impact into the manufacturing system and works with site team to verify compliance to requirements.&nbsp;</li><li>Interfaces and/or works closely with other departments on procedural issues related to the control of product quality.</li><li>Participates in the development and implementation of quality related policies and procedures based on corporate and government/customer requirements, as well as in conjunction with AS9100 and NADCAP requirements.</li><li>Leads Material Review Board activities, failure analysis and corrective action investigations, and assists in the timely dispositioning and processing of nonconforming material.</li><li>Identifies and leads implementation of process improvements on assigned program(s) or product area(s) to minimize or eliminate product deficiencies and nonconformances.</li><li>Leads both customer and supplier facing quality functions, relative to quality performance, investigations, audits and corrective actions.</li><li>Prepares periodic and special reports on quality statistics and other related quality issued on assigned program(s) or product area(s).</li><li>Coordinates customer source inspection and/or performs Designated Source Quality Representative functions for various customers, where applicable.</li><li>Responds to customer Corrective Action Requests in a timely manner, by investigating and determining root cause and corrective/preventive measures to eliminate deficiencies.&nbsp; Leads cross-functional team efforts to identify, resolve issues and monitor nonconformance trends.</li><li>Performs internal audits/surveys, where applicable, to assure compliance to specific quality/customer requirements.</li><li>Participate actively in the NADCAP and AS9100 audit preparation.</li><li>Audits and validates Statistical Process Control data and procedures for assigned program(s) or product area(s).</li><li>Maintains a working knowledge of government and industry quality assurance codes and standards.</li></ul> Benefits/Salary: The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation.&nbsp;The salary range for this position is $69,000 to $98,500 Basic Qualifications:&nbsp; <ul><li>Bachelor's degree from an accredited institution highly desired&nbsp;</li><li>Minimum 3 years of experience in Quality Aerospace manufacturing</li><li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li><li>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status.&nbsp; ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee</li></ul> Preferred Qualifications:&nbsp; <ul><li>Bachelor’s Degree from an accredited institution in a STEM discipline&nbsp;</li><li>ISO or AS9100 Lead Auditor certification</li></ul> Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> Howmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

Quality Engineer (Aerospace)

Howmet Aerospace, headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit&nbsp;<a>www.howmet.com</a>. Follow @howmet:&nbsp;Twitter,&nbsp;Instagram,&nbsp;Facebook,&nbsp;LinkedIn&nbsp;and&nbsp;YouTube. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit&nbsp;<a>www.howmet.com</a>. Follow @howmet:&nbsp;Twitter,&nbsp;Instagram,&nbsp;Facebook,&nbsp;LinkedIn&nbsp;and&nbsp;YouTube. Job Summary This position supports manufacturing by providing focused projects that will improve throughput, reduce inventory and reduce operating expense.&nbsp; Drives reduced labor costs through cellular manufacturing and new/improved methods and equipment. Responsibilities include: <ul><li>Follow Howmet’s Safety Regulations and work Rules Handbook along with all department specific safety requirements.</li><li>Applies standard practices and techniques, adjust and correlate data recognize discrepancies in results and take corrective action.</li><li>Document work and prepare&nbsp;</li></ul> Equipment &amp; Fixturing <ul><li>Designs and implements TPM and preventative maintenance programs.</li><li>Ensures safe design and operation of all tools and equipment used by manufacturing.</li><li>Selects best techniques and tools for manufacturing operations after researching options.</li><li>Provides cost justification for equipment fixtures and tooling by selecting appropriate techniques and tooling.</li><li>Trains operators on the proper use of new equipment and fixtures.</li><li>Interacts with vendors to design and develop specifications for equipment.</li></ul> Manufacturing Methods <ul><li>Analyzes and improves work practice methods, ergonomics and material handling to eliminate waste and improve work efficiency.</li><li>Provides input into plant layout or acts independently to improve workflow.</li><li>Utilizes continuous various improvement methodologies including, 6 Sigma, SPC, IPC, COP and step-down plans.</li></ul> Communications <ul><li>Make presentations on various topics including cost presentations, continuous improvement and manufacturing operations.</li><li>Prepares and communicates various engineering documents.</li><li>Acts as liaison with part number engineers, supervision and operators.</li><li>Prepares technical reports.</li></ul> Internal Customer Support <ul><li>Provides manufacturing support for part number engineers.</li><li>Provides information, data analysis to and takes action items from QSIs.</li><li>Must comply with all company attendance policies and guidelines; this includes, but is not limited to, regular attendance and occasional overtime.</li><li>Other duties as assigned.</li></ul> Skills and Abilities <ul><li>Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.&nbsp; Ability to write reports, business correspondence, and procedure manuals.&nbsp;Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.&nbsp;</li><li>Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.&nbsp; Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.</li><li>Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.</li></ul> Basic Qualifications: Education: <ul><li>Bachelor's degree in Engineering from an accredited institution.</li><li>Must be able to provide documentation in the original form establishing both your identity and your employment eligibility in the U.S.</li><li>This position entails access to export-controlled items you must be able to lawfully obtain access to such items.</li></ul> Preferred Qualifications <ul><li>5 years related experience and/or training; or equivalent combination of education and experience.</li></ul> Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Join the Clean Energy RevolutionBecome a Power Systems Engineer 3 at Southern California Edison (SCE) and build a better tomorrow. In this job, you will work with a team to perform analysis and provide recommendations to address technical issues related to Real-Time reliability operation and control of an electric utility. You will also be part of the implementation and deployment of the replacement or enhancement of a Real-Time Power System Network Modeling and Applications. You will work closely with the business clients to understand their requirements and understanding of how the business uses the applications for reliability monitoring, control, and maintenance of the electric grid.Additionally, you will develop, validate, and optimize electrical models to ensure reliable and efficient power delivery. As a Power Systems Engineer 3, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?&nbsp; <h4>Responsibilities</h4><ul><li>Ensures technical issues and problems are resolved in a timely, efficient and cost-effective manner utilizing available resources</li><li>Supervises, leads, and coordinates work with full time and contract employees in the execution of new technical strategies, equipment or standards.</li><li>Conducts life cycle assessments for utility infrastructure materials and processes; improves preventive maintenance procedures to decrease overall downtime</li><li>Conducts risk assessments and implements risk mitigation strategies to ensure the safety and reliability of engineering projects</li><li>Supports audits and inspections; ensures compliance with relevant environmental, health, and safety regulations</li><li>Provides engineering and technical expertise and guidance for the identification, analysis and resolution of high impact, complex and/or cross-functional problems in engineering</li><li>Ensures the engineering facility design basis is controlled and design basis documentation is maintained</li><li>Conducts engineering and related studies with full technical responsibility for planning and coordinating high-impact complex projects</li><li>Provides support and technical training to junior engineering levels</li><li>A material job duty of all positions within the Company is ensuring the protection of all its physical, financial and cybersecurity assets, and properly accessing and managing private customer data, proprietary information, confidential medical records, and other types of highly sensitive information and data with the highest standards of conduct and integrity.</li></ul><h4>Minimum Qualifications</h4><ul><li>Bachelor's Degree in Engineering or Bachelor's Degree in a scientific/technical/math field.</li><li>Five or more years of experience performing engineering work in operations, production, construction or maintenance environments.</li><li>Possess a valid Class C Driver's License.</li></ul>Preferred Qualifications<ul><li>Master’s degree in electrical engineering or related field.</li><li>Experience with SCADA Systems. </li><li>Experience maintaining real-time power system applications such as: State Estimator, Real-time contingency analysis, Network Topology Processor.</li><li>Experience performing power flow analysis for electric utilities. </li><li>Effective communication, ethics, negotiation, teamwork and optimally manage multiple assignments at once.</li></ul>Additional Information<ul><li>This position’s work mode is&nbsp;hybrid.&nbsp;The employee will report to an SCE facility for a set number of days with the option to work remotely on the remaining days.  Unless otherwise noted, employees are required to work and&nbsp;reside in the state of California.  Further details of this work mode will be discussed at the interview stage.&nbsp;The work mode can be changed based on business needs.</li><li>Visit our&nbsp;Candidate Resource&nbsp;page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!</li></ul><ul><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.&nbsp;</li></ul><ul><li>The primary work location for this position isAlhambra, CA.&nbsp; However, the successful candidate may also be asked to work for an extended amount of time at (alternate work location).</li></ul><ul><li>This position has been identified as a NERC/CIP impacted position - Prior to being hired, the successful candidate must pass a Personnel Risk Assessment (PRA) or Background Investigation.&nbsp; Once hired, the candidate must complete specified training prior to gaining un-escorted access to assigned work location and performing necessary job duties.</li></ul><ul><li>This position has an option for a 9/80 Alternate Work Schedule or 40hrs/5 days a week.</li></ul><ul><li>Relocation does not apply to this position.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.Southern California Edison is a proud Equal Opportunity Employer, including disability and protected veteran status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

Southern California Edison

Power Systems Engineer 3

Hiring Manager:&nbsp;Fernando Pena&nbsp;Job Abbreviation:&nbsp;ENG900_P1_E&nbsp;Pay Grade:&nbsp;&nbsp;Exempt - 30&nbsp;Pay Range:&nbsp;$77,200.00&nbsp;-$115,800.00&nbsp;Join the Clean Energy RevolutionBecomean&nbsp;Engineer 1at Southern California Edison (SCE) and build a better tomorrow. In this job, you’ll work on grid hardening and resilency activities as well as plan for our future growth to serve SCE customers. As an&nbsp;Engineer 1, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?<h4>Responsibilities</h4><ul><li>Prepares technical engineering evaluations and supports the inspections of equipment and operations</li><li>Assists in the review and applications of new technologies to improve quality of service to customers</li><li>Maintains records and documentation on relevant engineering procedures and preventative/ demand maintenance</li><li>Assists with engineering projects using existing procedures to investigate, evaluate and assist in producing technically correct and cost-effective designs and solutions</li><li>Supports the document lifecycle within assigned projects according to defined organizational processes</li><li>Provides operational support to improve customer satisfaction and reliability performance; monitors the trending of electrical system health</li><li>Assists with Root Cause Analysis (RCA), Apparent Cause Analysis (ACA), and miscellaneous investigations to troubleshoot problems, making changes to correct them</li><li>Observes all safety policies during the execution of required tasks and ensures safety standards are met and safe working practices are adhered to</li><li>A material job duty of all positions within the Company is ensuring the protection of all its physical, financial and cybersecurity assets, and properly accessing and managing private customer data, proprietary information, confidential medical records, and other types of highly sensitive information and data with the highest standards of conduct and integrity.</li></ul><h4>Minimum Qualifications</h4><ul><li>Bachelor's Degree in Engineering or Bachelor's Degree in a scientific/technical/math field</li><li>Experience performing engineering work in operations, production, construction or maintenance environments</li><li>Possess a valid Class C Driver's License</li></ul>Preferred Qualifications<ul><li>Experience with CYME</li><li>Experience wth Microsoft Office Suites</li></ul>Additional Information<ul><li>This position’s work mode is&nbsp;hybrid.&nbsp;The employee will report to an SCE facility for a set number of days with the option to work remotely on the remaining days.  Unless otherwise noted, employees are required to work and&nbsp;reside in the state of California.  Further details of this work mode will be discussed at the interview stage.&nbsp;The work mode can be changed based on business needs.</li></ul><ul><li>Visit our&nbsp;Candidate Resource&nbsp;page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!</li></ul><ul><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.&nbsp;</li></ul><ul><li>This position has been identified as a NERC/CIP impacted position - Prior to being hired, the successful candidate must pass a Personnel Risk Assessment (PRA) or Background Investigation.&nbsp; Once hired, the candidate must complete specified training prior to gaining un-escorted access to assigned work location and performing necessary job duties.</li></ul><ul><li>Relocation does not apply to this position.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.Southern California Edison is a proud Equal Opportunity Employer, including disability and protected veteran status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

Engineer 1

Join the Clean Energy RevolutionBecome an Electrical DCS Engineer at Southern California Edison (SCE) and build a better tomorrow. In this job, you’ll be responsible for the safe and reliable operations and maintenance (O&amp;M) of the various Distributed Control Systems (DCS) used to operate SCE’s Power Generation and Water &amp; Gas systems. You will also assist with architecting and implementing system upgrades and new solutions to challenging issues, including enabling innovative technology in the renewable generation future at SCE. Additionally,<ul><li>Directs and performs sophisticated DCS maintenance and improvement activities including major logic and design changes, patching, programming, device management, configuration changes and system integration.</li><li>Resolves minor and/or sophisticated incidents and issues involving control system hardware, software, demonstrating industry and technical experience with DCS and power plant operations.</li><li>Provides recommendations on potential improvements to control system, which can improve and/or provide efficiencies to power plant operations.</li><li>Actively participates to establish and complete projects within the Generation portfolio including prioritization, planning, design, execution, testing, and deployment of various control system technologies.</li></ul>As an&nbsp;Electrical DCS Engineer, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?<h4>Responsibilities</h4><ul><li>Ensures technical issues and problems are resolved in a timely, efficient and cost-effective manner utilizing available resources</li><li>Supervises, leads, and coordinates work with full time and contract employees in the execution of new technical strategies, equipment or standards.</li><li>Conducts life cycle assessments for utility infrastructure materials and processes; improves preventive maintenance procedures to decrease overall downtime</li><li>Conducts risk assessments and implements risk mitigation strategies to ensure the safety and reliability of engineering projects</li><li>Supports audits and inspections; ensures compliance with relevant environmental, health, and safety regulations</li><li>Provides engineering and technical expertise and guidance for the identification, analysis and resolution of high impact, complex and/or cross-functional problems in engineering</li><li>Ensures the engineering facility design basis is controlled and design basis documentation is maintained</li><li>Conducts engineering and related studies with full technical responsibility for planning and coordinating high-impact complex projects</li><li>Provides support and technical training to junior engineering levels</li><li>A material job duty of all positions within the Company is ensuring the protection of all its physical, financial and cybersecurity assets, and properly accessing and managing private customer data, proprietary information, confidential medical records, and other types of highly sensitive information and data with the highest standards of conduct and integrity.</li></ul><h4>Minimum Qualifications</h4><ul><li>Bachelor's Degree in Engineering or Bachelor's Degree in a scientific/technical/math field. </li><li>Five or more years of experience performing engineering work in operations, production, construction or maintenance environments.</li><li>Posses a valid Class C Driver's License.</li></ul>Preferred Qualifications<ul><li>Proven experience with programing and managing any of the following: Ovation DCS, GE Mark platforms, Woodward, Rockwell solutions and/or any other major DCS technology platform.</li><li>Control Engineering, Electrical Engineering, Power System Engineering, or Power Plant Engineering expertise.</li><li>Knowledge of Continuous Emissions Monitoring Systems (CEMS), Remote Intelligent Gateways (RIG’s), Water SCADA, Burner Management System (BMS) and other control system platforms</li><li>Experience working with heavy-duty gas/steam turbines and aero-derivative turbines.</li><li>Ability to self-start, be proactive, take initiative, be resilient, tackle challenges and rise to such.</li><li>Experience integrating Artificial Intelligence (AI) for control systems.</li><li>Experience with department planning and budgeting.</li><li>Being flexible in approach, strong customer service and ability to travel.</li><li>Ability to present in front of a group, lead and optimally manage meetings.</li><li>Excellent communication &amp; teamwork skills</li></ul>Additional Information<ul><li>This position’s work mode is hybrid. The employee will report to an SCE facility for a set number of days with the option to work remotely on the remaining days.  Unless otherwise noted, employees are required to reside in the state of California.  Further details of this work mode will be discussed at the interview stage. The work mode can be changed based on business needs.</li><li>Visit our Candidate Resource page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!</li><li>The primary work location for this position is Redlands, CA (located at a combined cycle power plant); however, the successful candidate may also be asked to work for an extended amount of time across the various power generation sites within SCE’s territory to support plants and technology systems 24/7 uptime operations during off-hours on an as needed basis.</li><li>Position will require up to 60% traveling and being out in the field throughout the SCE service territory. Must be able to drive, take boats or other transportation methods (as needed) and occasionally work in off-road or hiking conditions (some of our assets may be in remote places).</li><li>This position has been identified as a NERC/CIP impacted position - Prior to being hired, the successful candidate must pass a Personnel Risk Assessment (PRA) or Background Investigation.&nbsp; Once hired, the candidate must complete specified training prior to gaining un-escorted access to assigned work location and performing necessary job duties.</li><li>Relocation may apply to this position.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.Southern California Edison is a proud Equal Opportunity Employer, including disability and protected veteran status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

Electrical DCS Engineer 3

Construction Inspector Technician&nbsp;Interested candidates must apply to the Construction Inspector Technician posting by visiting careers.paturnpike.com by May 21, 2025.&nbsp;Posting Start Date:&nbsp;May 7, 2025&nbsp;Posting End Date:&nbsp;May 21, 2025&nbsp;Position Number:&nbsp;80000313&nbsp;Union:&nbsp;Local 77&nbsp;FLSA Status:&nbsp;Hourly&nbsp;Department:&nbsp;Engineering&nbsp;Pay Grade:&nbsp;PR61A&nbsp;Hourly Rate:&nbsp;$26.18 &nbsp;Employment Type:&nbsp;Full Time&nbsp;Building Location:&nbsp;Plymouth Meeting Maintenance Building&nbsp;Building Street:&nbsp;331 W. Germantown Pike&nbsp;Building City:&nbsp;Plymouth Meeting&nbsp;Building State:&nbsp;Pennsylvania (US-PA)&nbsp;Building Zip Code:&nbsp;19462&nbsp; &nbsp;The Pennsylvania Turnpike Commission, opened on October 1, 1940, is known as “America’s First Superhighway”!  Our mission is to operate a safe, reliable, customer-valued toll road system that supports national mobility and commerce.  The PTC operates a 565-mile system with over 205 million transactions annually.  Together, we are building the highway of the future.&nbsp;Job Purpose and Summary&nbsp;This is skilled and technical work assisting in the inspection and testing of construction materials, as well as the inspection of workmanship on construction projects. An employee in this class is assigned construction inspection teams to perform simple inspection, computing, or measuring duties. Work assignments may vary until the employee has demonstrated aptitude or talent for one of several technical specialties, but duties are usually defined after initial orientation. Incumbents will receive detailed instructions on each new phase of an assignment but are expected to perform independently after standard procedures have been learned. Work is reviewed by a supervisor through analysis of reports and the observation of performance.&nbsp;Essential Functions &amp; Responsibilities&nbsp;Assists in performing inspections of workmanship and materials on highway, bridge, or other construction projects involving various construction operations.&nbsp;Maintains complete records and documentation of work performed to support final cost determination.&nbsp;Assists in observing, inspecting, and verifying that the methods, materials, equipment, and workmanship conform to established quality requirements, standards and specifications.&nbsp;With supervision, enforces federal, state, and local laws regulating construction procedures, safety practices and working conditions.&nbsp;May interpret contract requirements to contractors and construction workers, with supervision.&nbsp;Reads and interprets assigned civil engineering plans, maps, and specifications.&nbsp;Logs data and maintains records related to projects.&nbsp;Works extended hours, on call 24/7, to assist in management of normal and emergency operations.&nbsp;Uses situational awareness to anticipate and prevent accidents.&nbsp;Perform related duties as assigned.&nbsp;  &nbsp;Qualifications&nbsp;High school diploma or equivalent certification. &nbsp; Possession of a NICET level 1 certification in a Civil Engineering Technology related program;  &nbsp; OR  &nbsp; Must obtain a NICET level 1 certification in a Civil Engineering Technology related program within 12 months to maintain employment. &nbsp; One (1) year of experience in highway construction inspection. Equivalent combination of education, experience and/or training may be accepted.  &nbsp; Possession of valid driver’s license. &nbsp;Competencies&nbsp;Regular and Predictable Attendance&nbsp;Decision Making and Independent Judgment&nbsp;Communication Proficiency&nbsp;Reliability&nbsp;Mathematical Understanding&nbsp;Quality Control&nbsp;Flexibility&nbsp;Active Listening&nbsp;Time Management&nbsp;Attention to Detail&nbsp;Technical Capacity&nbsp;Physical Demands and Work Environment&nbsp;Position may demand occasionally working long hours in emergency situations or for extended work assignments. Position requires the physical capability to appropriately stand, stoop, walk, lift and carry heavy tools and/or equipment when necessary. Position requires frequent work at a computer utilizing business programs and Pennsylvania Turnpike Commission-specific operating systems. Position requires frequent travel and/or fieldwork with exposure to roadway traffic. Office environment with low levels of noise, adequate lighting and comfortable temperature. Field environment may include exposure to moderately adverse and undesirable conditions. Physical environment is generally safe, but safety equipment or precautions must be followed in field conditions.&nbsp;Benefits&nbsp;Employees will be offered an exceptional benefits package which includes comprehensive medical and prescription coverage, with minimal employee contribution, for employee, spouse and/or eligible dependents. A range of retirement plan options are offered through the Pennsylvania State Retirement System (SERS). Dental and vision coverage are also offered through the Local Teamsters Union. In addition, leave programs, tuition reimbursement and employee assistance program are available to employees.&nbsp;The Pennsylvania Turnpike Commission is an equal opportunity employer. We value diversity and are committed to creating an inclusive environment for all employees. If you need assistance or an accommodation due to a disability, you may contact the Human Resources Department by calling 717-831-7378.&nbsp;

Pennsylvania Turnpike Commission

Construction Inspector Technician

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!SPACE SYSTEMSRocket Lab’s Space Systems team is responsible for every satellite and satellite component made by Rocket Lab: from complete satellites destined for missions to the Moon and Mars, to the individual components and subsystems that make up a satellite like solar panels, flight software, reaction wheels and star trackers, separation systems, radios, and more. Our Space Systems team is made up of engineers, technicians, and designers who design, create, and put together our own satellites for missions across the commercial, government, and defense sectors, or who build and assemble satellite hardware and software that supports other satellite missions.SENIOR FLIGHT SOFTWARE ENGINEER IIAs a Senior Flight Software Engineer II&nbsp;based at Rocket Lab’s site in Littleton, CO, you will have the opportunity to play a key role in supporting the development of flight software for our Space Systems programs. You’ll spend your days participating in all aspects of software design and development, from requirements definition through coding and testing. And when we say test, we mean your software will be on orbit within weeks and months, not years. Thanks to having our own rockets and launch sites, we have frequent opportunities to test and operate our software on orbit. To be successful in this role, you must want to see your software make a big impact on the way we explore space and use it as a platform for discovery and innovation. Join a driven team of pioneers relentlessly tackling challenging projects, delivering on the impossible, and making an impact on the future of space!WHAT YOU’LL GET TO DO:&nbsp;<ul><li>Develop application software to run within a Real Time Operating System (RTOS) and/or embedded Linux</li><li>Develop hardware drivers to interface to Inertial Measurement Units (IMUs), Star Trackers, Reaction Wheels and other spacecraft sensors and actuators</li><li>Develop and maintain comprehensive unit tests to run within a Continuous Integration framework</li><li>Collaborate with hardware-in-the-loop test engineers to verify and validate combined software and hardware functionality</li><li>Collaborate with systems engineers and embedded systems engineers in developing, documenting and validating requirements</li><li>Participate in review of source code changes and ensure all changes meet company coding standards</li><li>Participate in design reviews such as a PDR and CDR</li><li>Assist with on-orbit (and interplanetary!) flight operations</li></ul>YOU’LL BRING THESE QUALIFICATIONS:<ul><li>U.S. citizenship is required, due to program requirements</li><li>Bachelor's degree in aerospace engineering, computer science, electrical engineering, or equivalent technical degree</li><li>8+ years of demonstrated applicable experience in embedded software development</li><li>Proficiency in C and C++ languages&nbsp;</li><li>Experience with Real Time Operating Systems (RTOS) or with Embedded Linux</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>Advanced Degree</li><li>Experience developing software and drivers with CAN/CAN-FD and/or UDP/TCP within an embedded system</li><li>Experience developing software for autonomous vehicles operating in harsh environments, such as satellites or autonomous vehicles</li></ul>ADDITIONAL REQUIREMENTS:<ul><li>Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.&nbsp;&nbsp;&nbsp;</li><li>Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.&nbsp;&nbsp;</li><li>Must be physically able to commute to buildings&nbsp;</li><li>Occasional exposure to dust, fumes and moderate levels of noise.&nbsp;</li></ul>The expected salary range for the position is displayed in accordance with the Colorado Equal Pay for Equal Work Act. Final agreed upon compensation is based upon individual qualifications and experience.&nbsp; Base salary is only one part of Rocket Lab’s compensation package for this role.&nbsp;You may be eligible for company stock, or cash incentives, and&nbsp;can purchase discounted stock through Rocket Lab’s Employee Stock Purchase Program. Employee benefits also include medical, dental, and vision insurance coverage; 401(k) retirement plan options; paid vacation, holidays, and sick leave; paid parental leave; and other discounts and perks.&nbsp;&nbsp;Base Pay Range (CO Only)$120,000—$160,000 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Rocket Lab

Senior Flight Software Engineer II

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!SPACE SYSTEMSRocket Lab’s Space Systems team is responsible for every satellite and satellite component made by Rocket Lab: from complete satellites destined for missions to the Moon and Mars, to the individual components and subsystems that make up a satellite like solar panels, flight software, reaction wheels and star trackers, separation systems, radios, and more. Our Space Systems team is made up of engineers, technicians, and designers who design, create, and put together our own satellites for missions across the commercial, government, and defense sectors, or who build and assemble satellite hardware and software that supports other satellite missions.&nbsp;SENIOR SPACECRAFT OPERATIONS ENGINEER IBased on site at Rocket Lab's headquarters in Long Beach, CA the Senior Spacecraft Operations Engineer I&nbsp;is responsible for the operations development and on-orbit operations of Rocket Lab’s Photon satellites. You will support the Spacecraft Operations Lead and the Spacecraft Operations team who are responsible for maintaining the health and safety of Rocket Lab’s growing fleet of spacecraft and ensuring that mission objectives and SLAs are met. The team’s goal is to maximize the value Rocket Lab can create from a constantly changing fleet of diverse spacecraft. The Spacecraft Operations team also works closely with related teams, such as the spacecraft design, AIT, flight software, etc., to help improve both the ground and satellite-based capabilities over time.&nbsp;WHAT YOU’LL GET TO DO:<ul><li>Works with the launch operations team, spacecraft subsystem and systems engineers, flight software, and ground support to build outcomes and products that support the whole team.</li><li>Communicates frequently and effectively, highlighting success and learning from failures.</li><li>Support rigorous/challenging schedules during spacecraft ground-based testing, launch windows, and on-orbit operations.</li><li>Develops automated processes to operate spacecraft.</li><li>Strong communication skills and constructive participation in forward planning and incident response</li></ul>YOU'LL BRING THESE QUALIFICATIONS AS A SPACECRAFT OPERATIONS ENGINEER:<ul><li>Bachelor's degree in aerospace, Systems, Software engineering or other engineering degree</li><li>5+ years of experience in any of the following: space mission design, satellite subsystems, ground systems, or spacecraft operations</li><li>Exposure to modern development practices such as git, CI/CD, and cloud infrastructure</li><li>Familiarity with Linux systems and software development experience, such as Python, Ruby, C, C++, or other high-level languages</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>Active TS/SCI Clearance</li><li>Prior experience in spacecraft operations</li><li>Prior experience in satellite command and control</li><li>Knowledge and experience with satellite ground systems</li></ul>ADDITIONAL REQUIREMENTS:<ul><li>Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus</li><li>Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing</li><li>Must be physically able to commute to buildings&nbsp;</li><li>Occasional exposure to dust, fumes and moderate levels of noise</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$135,000—$170,000 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Senior Spacecraft Operations Engineer I

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!SENIOR AVIONICS ENGINEER I - MISSION FORMULATIONBased out of Rocket Lab's global headquarters in Long Beach, CA, the Senior Avionics Engineer I – Mission Formulation&nbsp;is responsible for developing high-performance launch vehicle systems in support of the Launch Systems Business Development and Strategy team. &nbsp;The Senior Avionics Engineer I - Mission Formulation is an integral part of Rocket Lab’s Global Launch Services (GLS) Mission Formulation Team which works closely with other Engineering teams and Production to bring new launch and mission concepts to life. This team is also responsible for the formulation and implementation of classified missions on HASTE and Electron launch vehicles and play a key role in developing future missions for Electron and Neutron. Given the high launch cadence of Electron and pace of Neutron development, you will have unparalleled opportunities for end-to-end hardware development and seeing your designs reach space.WHAT YOU’LL GET TO DO:<ul><li>Primary Avionics Design engineering contact to Business Development for proposal and mission concepts, including:<ul><li>Electron and Neutron mission operational concept development</li><li>Electrical and RF design and analysis for unique payload accommodations including processing, vehicle integration, and launch site</li><li>Designing and documenting electrical schematics, harnesses, and kits, including custom vehicle electrical schematics, and providing detailed pinouts for all electrical interfaces to payloads or deployers.</li><li>Working with external stakeholders and customers for mission-specific requirements engineering</li><li>Documenting the proposed avionics design solution and participating in design reviews with the customer</li></ul></li><li>Work with the Rocket Lab Engineering and Production teams to:<ul><li>Develop tools and processes for automating common proposal analysis tasks</li><li>Participate in program execution of Electron and Neutron system commissioning and calibration</li></ul></li></ul>YOU’LL BRING THESE QUALIFICATIONS:<ul><li>Bachelor’s degree in mechanical or aerospace engineering or other technical discipline</li><li>5+ years of working experience in engineering</li><li>Experience developing full design solutions for significant avionics or electrical systems in orbital launch vehicle or missile systems</li><li>Active DoD US Government Secret security clearance or, ability to obtain and maintain one</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:&nbsp;&nbsp;<ul><li>Active TS/SCI clearance</li><li>Rapid conceptual design iteration experience</li><li>Hands-on development and testing experience: FPGA, ARM processors, etc.</li><li>Ability to take a product from concept through to production with little supervision</li><li>Master’s or PhD in mechanical engineering or aerospace engineering</li><li>Experience with requirements assessments and interface control document generation</li><li>Creative, analytical, good at problem solving</li><li>Ability to work on own initiative and to plan daily workflow to meet higher level tasks</li><li>Clear communication skills and calm under pressure</li></ul>ADDITIONAL REQUIREMENTS:<ul><li>Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus&nbsp; &nbsp;</li><li>Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing</li><li>Must be physically able to commute to buildings&nbsp;</li><li>Occasional exposure to dust, fumes and moderate levels of noise&nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$135,000—$160,000 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

615 Engineering Jobs