field_remote_option

field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

Title Facilities Custodian&nbsp; About the Organization Concern Housing is a non-profit agency committed to helping individuals and families to live in the community with dignity and enhanced opportunities through the provision of housing and support services. We are one of the largest housing agencies of this kind in New York State, currently serving approximately 1,300 individuals and families in over 240 locations. Concern offers a variety of housing options with individualized support services designed to support personal growth and independence. Our workplace culture thrives by embracing diversity and rewarding innovative ideas. Diversity at our agency means fostering a workplace in which individual differences are recognized, appreciated, respected and responded to in ways that fully develop and utilize each person's talent and strengths.&nbsp; Position Facilities Custodian- Outside Hires&nbsp; Full-Time/Part-Time Full-Time&nbsp; Location Pitkin Ave., Brooklyn (Logan)&nbsp; Salary $40,000&nbsp; Days/Hours Monday - Friday; 9am - 5pm&nbsp; Description Concern Housing is seeking a Facilities Custodian to be&nbsp;responsible for the routine, general cleaning of the building and renovation/ repair of the individual apartments in the building. Duties and Responsibilities:<ul><li>Clean offices, hallways, stairs, lobby, lounge area, exercise room, conference room and all other common areas</li><li>Dust all office furniture, windowsills, countertops, etc.</li><li>Empty office, bathroom, lounge, exercise room, conference room and all other common area wastebaskets</li><li>Clean bathroom fixtures, counters, mirrors, and mop floors</li><li>Assure adequate supplies are in bathrooms</li><li>Clean building floors by sweeping, mopping, scrubbing, or vacuuming them</li><li>Maintain adequate stock of all custodial supplies, ordering additional as needed</li><li>Follow procedures for the use of chemical cleaners</li><li>Notify managers concerning the need for major repairs</li><li>Remove snow from sidewalks, driveways, and parking areas, using snowplows, snow blowers, and snow shovels, and spread snow melting chemicals</li><li>Maintaining the cleanliness of the exterior of the building including removing debris from the property, sweeping patios and walkways as needed</li><li>Set up, arrange, and remove decorations, tables, chairs, and ladders to prepare facility for events such as banquets and meetings</li><li>Spray insecticides and fumigants to prevent insect and rodent infestation as allowed by law and with proper protection</li><li>Dust, clean and maintain exercise equipment</li><li>Minor maintenance repairs as needed including changing light bulbs, filters etc.</li><li>Wearing proper Personal Protective Equipment at all times</li><li>Cleaning of individual apartments: kitchens, bathrooms, flooring, dusting of blinds, emptying trash baskets&nbsp;</li><li>Remain current with all Agency required compliance documents and trainings.</li></ul>Major periodic cleaning:<ul><li>Wash inside and outside of all windows, as assigned</li><li>Wash off marks on walls and doors</li><li>Dust door ledges and floor boards</li><li>Dust chair/furniture legs</li><li>Scrub bathroom floor, walls, and fixtures</li><li>Clean and/or shampoo carpeting and upholstery</li><li>Coordinate moving or set up of furniture to individual units</li><li>May be required to assist with the clean up of areas damaged by residents</li></ul> Salary: $40,000&nbsp; Position Requirements High School Diploma (preferred) plus 6 months or more related experience (preferred). Must have a valid drivers license. Good communication and interpersonal skills a must, as well as good client/customer service skills, ability to follow oral and written instructions, prioritize multiple tasks and work effectively with a team. Basic knowledge of cleaning products is required. The work requires routine walking, standing, bending and carrying items weighing less than fifty pounds.&nbsp; Moving items over fifty pounds utilizes a team lift. &nbsp; EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law.&nbsp; This position is currently accepting applications. Apply Now

Concern Housing

Facilities Custodian

North Idaho College is seeking a dedicated and skilled Assistant Professor of Welding to join our professional-technical team. This role is ideal for a master craftsperson and educator who is passionate about workforce development and student success. You'll provide hands-on instruction in OAC, SMAW, GMAW, and GTAW, as well as blueprint reading, layout procedures, metallurgy, and welding shop safety. We're looking for someone who brings deep industry expertise and a commitment to excellence in teaching. You'll thrive in this role if you can translate real-world welding experience into engaging lessons, maintain a safe and functional lab environment, and help students build confidence and competence with industry tools and standards. Strong communication, mentorship, and organizational skills are essential, as is the ability to collaborate with faculty, support student advising, and stay current with new technologies and instructional practices. This is more than a teaching role - it's an opportunity to shape the future of the trades, support local industry, and contribute to the mission of a dynamic community college. If you're passionate about welding and want to make a lasting impact on students' careers, we'd love to hear from you. Join us in shaping the skilled workforce of tomorrow"”right here in North Idaho. <a href="https://www.nic.edu/hr/benefits/" target="_blank">Enjoy excellent benefits, including retirement&nbsp;</a> 2 personal days per year 9 sick days per year Tuition assistance Job Description linked below:&nbsp;(some job boards may not include active links so please click Apply Now on the NIC website or go to&nbsp;<a href="http://www.nic.edu/jobs" target="_blank">www.nic.edu/jobs</a>&nbsp;to see full details);&nbsp; &nbsp;<a href="https://secure.dc4.pageuppeople.com/apply/TransferRichTextFile.ashx?sData=UFUtVjMtuVsHJhT-hRlYixSKD60DimE5g4I_taejMd5Tz9fQyn5Q3h8s472uHG9iFBfLqxdY2riTN3zhPCU68P3UvUzMZWG94iwnvK0GlkLOddQZxC3_uXid5Idb0yYN3_Qe2Rr_o_7XzQsuGOkbAKsZkDtVfg%7e%7e" target="_blank">Assistant Professor - Welding 6-25.docx</a> Minimum Qualifications A minimum of eight (8) years of recent related experience OR an Associate's degree in a related post-secondary or professional-technical education program and six (6) years of recent experience in an area related to the needs of the position OR a Bachelor's degree in a related area and three (3) years of recent experience related to the needs of the program. Demonstrated sensitivity to the needs of students, faculty, and staff from multi-cultural backgrounds. Demonstrated commitment to the philosophy and mission of a comprehensive community college. Required License and/or Certifications: Journeyman level status, Industry Certification, or Certification/Licensure by passing a State or Certification /Licensure examination. Starting pay range:&nbsp;$50,553 - $72,670 <a href="https://www.nic.edu/hr/salary-structures/" target="_blank">To see full Faculty Pay Grade Salary Structures click here&nbsp;</a> Work Site Location: Parker Technical Education Work Schedule: This tenure track position has summers off, with pay and benefits spread over 12 months! Employment is contingent upon successful completion of background check and proof of degree if required&nbsp;for this position.&nbsp; Application materials include:&nbsp; resume, cover letter Applications ONLY accepted through the North Idaho College Website! Advertised: June 11, 2025Applications close: June 27, 2025 11:55 PM

North Idaho College

Assistant Professor - Welding

The Maintenance Mechanic provides technical expertise and labor to maintain college equipment for a safe, comfortable environment for students, faculty, staff and community.
Essential Functions:
<ol>
<li>Conducts preventative maintenance program through inspections and system evaluation.</li>
<li>Duties include electrical, plumbing Heating Ventilation Air Condition (HVAC) repairs, facility structural repairs, facility renovations and/or construction.</li>
<li>Recommends materials and methods of accomplishment and issues material requisitions</li>
<li>Assists supervisor in campus keying systems. Cut and issue keys, make cores and repair locks and hardware.</li>
<li>Monitor building HVAC control through Energy Management computer system and schedule HVAC in buildings during occupied times</li>
<li>Monitor powerhouse equipment, perform necessary testing on heating and cooling water loops&nbsp; to ensure proper chemical levels</li>
<li>Works safely under all conditions.</li>
<li>Must be&nbsp; available for work after hours and on weekends per schedule.</li>
</ol>
Supplemental Functions:
<ol>
<li>Ability to make decisions.</li>
<li>Ability to operate effectively without supervision.</li>
<li>Ability to work in a team environment.</li>
<li>Ability to relate to a diverse faculty, staff and student population.</li>
<li>Utilize Purchasing systems to order needed parts/supplies</li>
<li>Performs other duties as assigned.</li>
</ol>
Education, Training and Experience Required:
<ol>
<li>High school diploma or equivalent.</li>
<li>Ability to read and interpret blueprints.</li>
<li>Minimum three (3) years experience in multi-skilled maintenance position in including electrical and industrial HVAC experience</li>
<li>Valid Tennessee driver’s license.</li>
<li>Basic Electrical Certification</li>
<li>Basic computer skills</li>
</ol>
Education, Training and Experience Preferred:
<ol>
<li>&nbsp;EPA Refrigeration Certification</li>
</ol>
Working Conditions:
<ol>
<li>Ability to lift up to 40 lbs.</li>
<li>Some bending, stooping and climbing.</li>
<li>Ability to work in all weather conditions.&nbsp;</li>
</ol>
Titles Supervised:
None
Hiring Salary Range: $35,200- 42,230
This position is based at the Columbia, TN Campus.

About Columbia State Community College:
As Tennessee’s first community college (established in 1966), Columbia State is committed to increasing access and enhancing diversity at all five of our campuses.&nbsp; Columbia State is a member of the Tennessee Board of Regents.&nbsp; Columbia State is known for excellence both inside and outside the classroom.
Columbia State offers a comprehensive benefits package, including but not limited to the following:
<ul>
<li>Vacation and Sick Leave</li>
<li>14 paid holidays</li>
<li>Medical, dental, vision and life insurance</li>
<li>Retirement plans</li>
<li>Optional 401K and 403B Deferred Compensation Plans</li>
<li>Educational benefits for the employee and their spouse and dependents</li>
</ul>
Columbia State Community College does not discriminate on the basis of race, color, religion, creed, ethnicity or national origin, disability, age, status as a protected veteran, genetic information, or any other class protected by Federal or State laws and regulations and by Tennessee Board of Regents policies with respect to employment, programs, and activities. The following person has been designated to handle inquiries regarding nondiscrimination policies: Executive Director of Human Resources <a href="mailto:humanresources@columbiastate.edu" target="_blank">humanresources@columbiastate.edu</a> 1665 Hampshire Pike, Columbia, TN 38401 931-540-2501

Motlow State Community College


      Maintenance Mechanic
    

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Position Purpose: Under the direction of Project Management, performs work involving the day-to-day operation and maintenance of the Drinking Water facility including all related infrastructure, equipment, buildings and grounds. Primary Duties/Responsibilities: <ul><li>Performs technical O&amp;M activities related to the Drinking Water facility, including all related infrastructure, equipment, processes, and systems.</li><li>Performs routine PM activities related to the including all related infrastructure, equipment, processes, and systems.</li><li>Conducts Drinking Water sampling and laboratory monitoring per Project and Regulatory requirements.</li><li>Assists in ensuring all equipment and processes are well maintained and functioning properly.</li><li>Perform work in a safe and professional manner by following all corporate and regulatory policies, procedures, and emergency response procedures.</li><li>Work weekends, holidays, and be on-call on a rotating basis/schedule with fellow operators.</li><li>Respond to emergencies, work additional hours as required to complete tasks as/and when needed.</li><li>Assists project and department to develop a culture of focus and engagement at the project to achieve EH&amp;S excellence.</li><li>Completes and maintains proper operational and maintenance documents and records.</li><li>Operates equipment and processes manually and through instrument control panels.</li><li>Operates project vehicles.</li><li>Performs cleanup/housekeeping activities at all facilities, buildings and grounds.</li><li>Carries out other duties as assigned.</li></ul> Work Environment: <ul><li>Work is performed both inside and outside with exposure to all kinds of weather conditions. </li><li>Incumbent may be occasionally exposed to some noise, silica, dust, fumes, smoke, gases, greases, oils, electrical energy, solvents, and vibrations. </li><li>Incumbent may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, and ladder/scaffolding, below ground and may be exposed to water and other liquid materials.</li></ul> Qualifications Education/Experience/Background: <ul><li>High School Diploma/GED is required.</li><li>5+ years of experience working in the Drinking water or industry or related fields.</li><li>Experience in a laboratory or utility related field, or a combination of education and experience required.</li></ul> Knowledge/Skills/Abilities: <ul><li>Strong reading, math, writing, and verbal communication skills.</li><li>Strong mechanical aptitude and ability to read, interpret, and record data from meters, gauges, scales, panels, computer consoles, and other equipment.</li><li>Computer skills, knowledge of Windows/Google, Office, Operations, Lab and CMMS programs, SCADA and PLC equipment and systems.</li><li>Troubleshooting/problem solving skills, provides input for corrective actions and implements corrective actions as needed.</li><li>Ability to understand/execute written and oral instructions, read/understand technical instructions and manuals.</li><li>Working knowledge and skills to operate specialty tools specific to Departmental needs and requirements.</li><li>Ability to operate complex controls, processes, and equipment.</li><li>Ability to maintain and repair equipment, have a strong mechanical aptitude.</li><li>Knowledge of Drinking water treatment systems, processes, and equipment.</li><li>Knowledge of Drinking water regulations, requirements &amp; reporting.</li><li>Cooperative interactions with fellow employees and within the project organization.</li><li>Must be able to work as a team in a teamwork-oriented environment.</li><li>Must be safety conscious and at times be able to work independently with little/no supervision.</li><li>Must be able to work closely with local contractors.</li></ul> Required Certification/Licenses/Training: <ul><li>Valid Massachusetts T-2/D-2 or higher Drinking Water Treatment/ Distribution License</li><li>Willingness to upgrade licenses in a mutually agreed upon amount of time.</li><li>Valid Massachusetts Driver's license.</li></ul> Physical Requirements: <ul><li>While performing the duties of this job, the employee is regularly required to talk or hear. </li><li>The employee is frequently required to stand; walk; climb stairs; sit; use hands to finger, handle, or feel.</li><li>They may periodically reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and taste or smell. </li><li>The employee may occasionally lift and/or move up to 50 pounds. </li><li>Specific vision abilities required by this job include ability to distinguish color, close vision, and distance vision.</li></ul> Additional Information Pay Range: $30.00 to $40.00 per hour. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Operations & Maintenance II

Company Description Veolia Group is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world's most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description As a Maintenance Technician, you'll be on the front lines providing maintenance expertise on water treatment systems for one of our industrial customers in Point Comfort, TX. This role involves working on a variety of technologies including clarification, dewatering system, media filtration, reverse osmosis (RO). To be successful in this profession, you'll need to have excellent mechanical, process and electrical know how and problem-solving skills. You will perform proper diagnosis of any malfunctioning machinery, general repairs, installing new equipment and systems and preventative maintenance programs on all assigned machinery as directed by the supervisor. If you like the idea of working in a challenging role doing meaningful work you can feel proud of, here's more... Key Characteristics <ul><li>Conduct maintenance and Install/Replace and/or supervise the replacement of proposed equipment</li><li>Verify installation is as per drawings</li><li>Consult with customer management and operation teams</li></ul><ul><li>Excellent mechanical know how and problem-solving skills</li><li>Operate, monitor, and optimize equipment performance</li><li>Meet with internal and external contributors to communicate schedules and address issues as necessary</li></ul> Duties &amp; Responsibilities <ul><li>Responsible for proper diagnosis of any malfunctioning machinery, general repairs, installs new equipment and systems as directed and maintains preventative maintenance programs on all assigned machinery</li><li>Carry out mechanical, electrical and controls troubleshooting on equipment such as valves, air compressors, ejectors, process pumps, blowers, and instrumentation</li></ul><ul><li>Performs preventative maintenance on plant and road equipment on a regular basis</li><li>Installs new equipment or rearranges existing equipment as directed</li><li>Performs building and ground maintenance as assigned</li><li>Practices good safety procedures in order to keep self and others injury free</li><li>Follows good housekeeping practices by keeping maintenance and tool storage area neat and clean as well as timely cleanup of work area after each job is completed</li><li>Maintains records and reports as directed by immediate supervisor</li><li>Maintain inventory of spare parts and adequate supply of chemicals and replacement parts</li><li>Monitor and maintain chemical injection systems</li><li>Assists in other departments and performs various duties as required</li></ul> Qualifications Knowledge, Skills &amp; Abilities <ul><li>Demonstrated ability to work independently and remotely with project teams</li><li>Provide customers with informal training around operation and maintenance of their system</li><li>Must be available on call for emergency repairs as needed to keep the plant in good running order</li><li>Ability to gain and maintain access to sites as assigned</li><li>Ability and willingness to read documents and implement such as safety rules, operating and maintenance instructions, and procedure manuals</li><li>Ability to perform physical acts such as lifting, climbing, and manual dexterity</li><li>Must be certified within the first 90 days of employment in safe operation of forklift trucks as evidenced on the 90-day evaluation</li></ul> Required: <ul><li>High School Diploma / GED / Home School Certification OR international equivalent 2+ years' experience of service/maintenance or equivalent in an industrial environment (trade school or apprenticeship training in plumbing, carpentry, or mechanical repair is highly desirable)</li><li>Valid Driver's License and clean driving record history</li></ul> Additional Information At Veolia, we realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We're an organization that champions diversity and inclusion at every rung of the ladder and are proud to be an equal opportunity workplace. Because our people are our greatest assets, we also offer competitive benefits that include: <ul><li>Medical, Dental, &amp; Vision Insurance Starting Day 1!</li><li>Life Insurance</li><li>Paid Time Off</li><li>Paid Holidays</li><li>Parental Leave</li><li>401(k) Plan - 3% default contribution plus matching!</li><li>Flexible Spending &amp; Health Saving Accounts</li><li>AD&amp;D Insurance</li><li>Disability Insurance</li><li>Tuition Reimbursement</li></ul> ****Applicants are required to be eligible to lawfully work in the U.S. immediately; employer will not sponsor applicants for U.S. work authorization (e.g. H-1B visa) for this opportunity**** VWTS does not accept unsolicited resumes from external recruiting firms. All vendors must have a current and fully executed MSA on file before submitting candidates. Any unsolicited resumes and candidate profiles will be deemed the property of VWTS, and no fee will be due. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

Field Service Representative (Maintenance Focus)

Elevator Maintenance Mech IIIJob ID: 10087Location: El Paso, TXFull/Part Time: Full TimeRegular/Temporary: RegularFLSA StatusNon-ExemptPosting End DateOpen until filledEarliest Start DateAs soon as possible.SalarySalary commensurate with education and experienceHours per Week40.00 Standard from 8:00 AM to 5:00 PM; flexibility required on evenings and weekendsHiring DepartmentFacilitiesPlease NoteNote: The primary accountabilities below are intended to describe the general content of and requirements of this position and are not intended to be an exhaustive statement of duties. Incumbents may perform all or some of the primary accountabilities listed below. Specific tasks or responsibilities will be documented in the incumbents' performance objectives as outlined by the incumbents' immediate supervisor or manager. This position is security-sensitive and subject to Texas Education Code §51.215, which authorizes the employer to obtain criminal history record information. Must possess a valid driver's license issued by the State where the applicant resides and must be insurable as defined in the UT System UTS 157, as applicable to the performance of essential duties and responsibilities of the position.Purpose of PositionPerforms highly complex (senior-level) elevator maintenance work such as assemble, install, repair, and/or maintain electric or hydraulic freight or passenger elevators, or dumbwaiters . Performs complex elevator control trouble-shooting on mechanical and electrical elevator systems. Applies quality control measures that assure that all preventive maintenance is completed in a professional, efficient and timely manner. Supervises projects, repairs and personnel. Prepares and conducts annual and 5-year safety tests on elevator systems.Essential FunctionsImplements programs to assure all UTEP elevators pass annual and other state inspections. Checks and assures quality control that safety regulations and building codes are met, and completes service reports verifying conformance to standards.Adjusts safety controls, counterweights , door mechanisms, and components such as valves, ratchets, seals, and brake linings.Assembles electrically powered stairs, steel frameworks, and tracks, and installs associated motors and electrical wiring. Assembles elevator cars, installing each car's platform, walls, and doors. Assembles, installs, repairs, and maintains elevators, escalators, moving sidewalks , and dumbwaiters , using hand and power tools, and testing devices such as test lamps, ammeters , and voltmeters.Identifies and maintains guide shoes and rollers to minimize the lateral motion of cars as they travel through shafts ; bolts or welds steel rails to the walls of shafts to guide elevators, working from scaffolding or platforms; assists in connecting car frames to counterweights, using steel cables. Connects electrical wiring to control panels and electric motors. Cuts prefabricated sections of framework, rails, and other components to specified dimensions . Operates elevators to determine power demands, and test power consumption to detect overload factors.Disassembles defective units, and repairs or replaces parts such as locks, gears, cables, and electric wiring. Inspects, trouble shoots, and repairs wiring connections, control panel hookups, door installations, and alignments and clearances of cars and hoist ways to ensure that equipment will operate properly. Installs electrical wires and controls by attaching conduit along shaft walls from floor to floor, then pulling plastic-covered wires through the conduit. Installs outer doors and door frames at elevator entrances on each floor of a structure. Trouble shoots and repairs malfunctions in brakes, motors, switches, and signal and control systems, using test equipment. Tests newly installed equipment to ensure that it meets specifications, such as stopping at floors for set amounts of time.Maintains log books that detail all repairs and checks performed. Maintains skills up-to-date by attending assigned or designated trainings .Reads and interprets blueprints to determine the layout of system components, frameworks, and foundations, and to select installation equipment.Works various schedules and is required to carry a pager and be On-call.Knowledge of all Microsoft Office software and able to learn and use institutional software systems. Complies with all State and University policies.Other duties may be assigned.Carries out supervisory responsibilities in accordance with the organization's objectives, policies and applicable laws.Required QualificationsA resume, cover letter, and a list of 3 professional references will be required to apply.Required QualificationsTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.High school diploma or GED.Five years of experience , related to the statement of duties and responsibilities; or equivalent combination of education and experience . Knowledge of machines and tools, including their designs , uses, repair, and maintenance . Knowledge of materials, methods, and the tools involved in the elevator service industry. Knowledge of relevant equipment , policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions. Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models. Occasional travel may be required.Possesses a current valid Texas driver's license.Preferred QualificationsCET Certification and/or IUEC Mechanic card.Working ConditionsThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job , the employee is frequently required to stand; walk ; use hands to feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee must occasionally lift and move up to 25 pounds. Specific vision abilities required by this job include color vision, peripheral vision, depth perception and ability to adjust focus . May be required to wear Personal Protective Equipment to include: Steel toe or Non-slippery shoes, back belt, ear plugs, eye protection, and gloves.The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions .While performing the duties of this job , the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to risk of electrical shock . The employee is occasionally exposed to high, precarious places and vibration . The noise level in the work environment is usually moderate.EO/AA StatementIn keeping with its Access and Excellence mission, The University of Texas at El Paso is committed to an open, diverse, and inclusive learning and working environment that honors the talents, respects the differences, and nurtures the growth and development of all. We seek to attract faculty and staff who share our commitment.The University of Texas at El Paso is an Equal Opportunity / Affirmative Action Employer. The University does not discriminate on the basis of race, color, national origin, sex, religion, age, disability, genetic information, veteran status, or sexual orientation and gender in employment or the provision of services in accordance with state and federal law. Discrimination on the basis of sex includes an employee's or prospective employee's right to be free from sexual harassment under Title IX of the Higher Education Amendments of 1972.For accommodation information for employees and applicants with disabilities, please contact UTEP's Equal Opportunity Office at <a href="mailto:eoaa@utep.edu.To" target="_blank">mailto:eoaa@utep.edu.To</a> apply, visit <a href="https://apptrkr.com/6291423jeid-22c7c18cb1425b44b4f466dbe6961245" target="_blank">https://apptrkr.com/6291423jeid-22c7c18cb1425b44b4f466dbe6961245</a>

The University of Texas at El Paso

Elevator Maintenance Mech III

Plumber IIJob ID: 12550Location: El Paso, TXFull/Part Time: Full TimeRegular/Temporary: RegularAbout UTEPUTEP is a comprehensive public research university that is increasing access to excellent higher education. We advance discovery of public value and positively impact the health, culture, education, and economy of the community we serve.The University of Texas at El Paso is America's leading Hispanic-serving university. Located at the westernmost tip of Texas, where three states and two countries converge along the Rio Grande, 84% of our 24,000 students are Hispanic, and more than half are the first in their families to go to college. UTEP offers 172 bachelor's, master's and doctoral degree programs at the only open-access, top-tier research university in America.Position InformationHiring Department: FacilitiesPosting End Date: Open until filled.Hours: 40 hours per week, standard Monday- Friday 8:00am- 5:00pm, flexibility is required on evenings and weekendsFLSA status: Non-exemptEarliest Start Date: As soon as possible.Salary: Commensurate with education and experience.Required Application Materials:• Resume• Cover Letter• List of three referencesThe primary accountabilities are intended to describe the general content of and requirements of this position and are not intended to be an exhaustive statement of duties. Incumbents may perform all or some of the primary accountabilities listed. Specific tasks or responsibilities will be documented in the incumbents' performance objectives as outlined by the incumbents' immediate supervisor or manager. This position is security-sensitive and subject to Texas Education Code §51.215, which authorizes the employer to obtain criminal history record information. A valid driver's license issued by the State where the applicant resides and insurability as defined in UTS 157 may be required to perform the position's essential functions.Purpose of PositionEssential FunctionsAssembles install, or repair pipes, fittings, or fixtures of heating water, or drainage systems, according to the specifications or plumbing codes. Assemble, install, alter, and repair pipe lines or pipe systems that carry water, steam, air, or other liquids or gases. May install mechanical control systems.Performs trouble shooting and repairs of water lines, gas lines, sanitary sewer, storm water conveyance and\ alterations of utility lines to accommodate the installation of new fixtures. drain cleaning machine.Locates and marks underground pipe in existing locations throughout campus.Perform inspection and repairs of back flow preventersJoins pipes by use of screws, bolts, fittings, solder, pvc solvent, and caulks joints by approved methods.Repairs and maintains existing plumbing fixtures.Purchases and controls inventories shop supplies, machinery and equipment.Generate a report of work orders needed to address shop issues.Estimates labor and material cost; reports the estimate to supervisor before submitting to work control system.Trouble shoots systems to determine root cause of the problem and make the necessary corrective measures.Implements installation and maintenance of plumbing systems based on as built blueprints and equipment M and O manuals.Must be available on an “On Call” and after regular hours including work for the support of events and emergencies.Frequently works without direct supervision.Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo. This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.Proficient knowledge of TCEQ regulations and laws.Review blueprints, building codes and specifications to determine work details, procedures, including ADA standards and methods. Work with Planning and Construction in the execution and inspection of their construction projects.Inspects all equipment in the direct area of the work order is in good working order. Generate work orders when needed and follow up with the necessary repairs or adjustments.Take the lead on repair and installation projects. From planning to the execution of the work to its fruition.Knowledge and experience to identify quickly analyze emergencies, actions, and events. Identify information by categorizing, prioritizing, recognizing differences / similarities, and detecting changes in circumstances or events.Generate and maintain a daily log, detailed annual work reports, backflow certifications and general plumbing shop records.Locates and marks position of pipe and pipe connections and passage holes for pipes in walls and floors.Cuts openings in walls and floors to accommodate pipe and pipe fittings.Ability to cut and thread all pipe by approved methods.Assembles and installs valves, pipe fittings, and pipes composed of metals, such as iron, steel, brass, and lead, and nonmetals, such as glass, vitrified clay, and plastic by approved methods.Basic knowledge of Microsoft Excel, Outlook, word and the internet. Must have the ability to learn institutional software systems.Knowledge of arithmetic, algebra, geometry, statistics, and their applications.Other duties may be assigned.No supervisory responsibilities.QualificationsTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.Required Qualifications:Education: High School diploma or (GED)andExperience: Four years of verified experience in the plumbing industry. Ability to obtain a Backflow Preventer License within one year of employment.Texas Journeyman Plumber License required.Preferred Qualifications: Backflow Preventer License preferred.Additional InformationThe physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee must frequently stand and walk. The employee must regularly sit; use hands to feel; reach with hands and arms; and talk or hear. The employee must lift and move up to 50 pounds.The noise level for this work environment is usually moderate.In keeping with its access, excellence and impact mission, The University of Texas at El Paso is committed to an open, diverse, and inclusive learning and working environment that honors the talents, respects the differences, and nurtures the growth and development of all. We seek to attract faculty and staff who share our commitment.The University of Texas at El Paso is an Equal Opportunity / Affirmative Action Employer. The University does not discriminate on the basis of race, color, national origin, sex, religion, age, disability, genetic information, veteran status, or sexual orientation and gender in employment or the provision of services in accordance with state and federal law. Discrimination on the basis of sex includes an employee's or prospective employee's right to be free from sexual harassment under Title IX of the Higher Education Amendments of 1972.For accommodation information for employees and applicants with disabilities, please contact UTEP's Equal Opportunity Office at <a href="mailto:eoaa@utep.edu.To" target="_blank">mailto:eoaa@utep.edu.To</a> apply, visit <a href="https://apptrkr.com/6291444jeid-e875311a6ad2d04b884cdb8ea81f8faa" target="_blank">https://apptrkr.com/6291444jeid-e875311a6ad2d04b884cdb8ea81f8faa</a>

Plumber II

<h4>Service Specialist - Maintenance&nbsp;</h4>Prosper West - Waite Park, MN&nbsp; Work Schedule: Monday - Friday 7:30AM - 4:30PMWhat's in it for you?&nbsp;The base salary for this position is expected to start at $24.00/hour, with the actual base salary amount dependent on a number of factors, including but not limited to a candidate's credentials, relevant experience, and primary job location, with consideration given to internal equity. This position is also eligible for a $1,500 sign-on bonus.This position is also eligible for:<ul><li>Quarterly Lease Renewal Bonus (double bonuses for the season)</li><li>Competitive PTO</li><li>Generous time off - 10 paid holidays, plus diversity day and your birthday</li><li>Paid Caregiver and Paid Parental Leave</li><li>20% Rent, Parking, and Storage Discount for Centerspace rents</li><li>32 Paid Hours of Volunteer Time Off</li><li>Medical/Dental/Vision Benefits – 1st of Month Following Start Date</li><li>Centerspace Stock Purchase Plan</li><li>401(k) match up to 5% per paycheck</li><li>Tuition Reimbursement &amp; Scholarship Program</li></ul>About Centerspace: Centerspace&nbsp;was founded in Minot, North Dakota, in 1970. You can find our corporate support offices located in Minneapolis, Minnesota and in Minot North Dakota, along with onsite operations in eight states. From Denver, CO to Minneapolis, MN, our company continues to grow throughout the Midwest, proudly providing apartment homes to thousands of residents, extending our vision to be the premier provider of apartment homes in vibrant communities by focusing on integrity and serving others.&nbsp;Centerspace is built around our employees.&nbsp; Our Mission and Vision unites our employees as one team.Position Summary Responsible for repairs of mechanical or aesthetic issues; general building preventative maintenance; maintaining the environmental conditions of spaces; maintaining accurate levels of inventory related to the building’s mechanical systems; know and perform individual emergency procedures and duties as dictated by the site emergency procedure manual.Expectations Expected to follow instructions, understand established procedures and comply with deadlines.&nbsp; Generally given guidance, but expected to be self-directed once trained.&nbsp; May need assistance in prioritizing duties, and setting deadlines.Essential Duties &amp; Responsibilities include the following. &nbsp;Other duties may be assigned.To perform the job successfully, an individual must be able to perform each essential duty satisfactorily.&nbsp; The requirements listed below are representative of the knowledge, skill, and/or ability required.&nbsp; Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.*Valid Driver's License &amp; Reliable Transportation are required.Maintenance:<ul><li>Complete minor and major repairs of mechanical or aesthetic issues to ensure the property is optimally functional, presentable, and safe.</li><li>Perform minor and major HVAC maintenance, such as replacing motors and bearings.</li><li>Change light bulbs, service flush valves, clean mechanical rooms, and plunge toilets.</li><li>Paint and/or wallpaper assigned areas and perform minor repairs to applicable areas.</li><li>Perform minor carpet repairs.</li><li>Demonstrate proficiency and respond appropriately to the building automation and security (including card access if applicable), fire, life, and safety systems.</li><li>Select and monitor service providers to ensure services delivered are the most effective and efficient for the property.</li><li>Perform general building preventative maintenance to ensure equipment is safe and effective for use, and down time with equipment meets or exceeds established specifications.</li><li>Service and monitor the HVAC equipment.</li><li>Maintain the environmental conditions of spaces to ensure the tenant and common space environments are acceptable for optimum use.</li><li>Perform preventative maintenance on:<ul><li>HVAC</li><li>Electrical</li><li>Plumbing</li><li>Lighting</li><li>Doors, locks, and hardware</li><li>Wall treatments</li></ul></li><li>Provide assistance to the Community Leader to ensure that tenant improvements are accurate and address concerns with appropriate contact, such as construction or tenant.</li><li>Monitor and maintain tools.</li><li>Perform assigned duties as prescribed in safety manuals.</li><li>Respond to test situations accurately.</li><li>Maintain sufficient technical and industry contacts and knowledge.</li><li>Participate in after hours on-call programs.</li><li>Assist outside contractors with major inspections.</li><li>Serve as a key contact between community leaders, operations managers, general managers, and tenants.</li><li>Apply current knowledge or devise creative solutions to proactively resolve issues.</li><li>Utilize any tools and/or processes implemented by the organization to assure adherence to quality standards.</li><li>Participate in capital improvements.</li></ul>Administrative:<ul><li>Maintain operating logs and record temperatures, pressures, and chemical level of heavy equipment such as chillers and boilers.</li><li>Complete reports and perform various administrative duties to positively support completion of activities and projects.</li><li>Maintain accurate levels of inventory related to the building’s mechanical systems to ensure optimum levels of inventory are on hand and readily accessible when needed.</li><li>Purchase parts and supplies from vendors; review pricing for competitive rates for parts, services, and supplies.</li><li>Stock items when received.</li></ul>Cleaning:<ul><li>Clean up vacant areas.</li><li>Remove debris from the building and grounds.</li><li>Provide backup for Community Porter.</li></ul>Emergency Situations:<ul><li>Know and perform individual emergency procedures and duties as dictated by the site emergency procedure manual and the safety manual to ensure that actions promote the safety and security of the employees, occupants, and structures, and correct actions are demonstrated in test situations and actual emergencies.</li><li>Promptly respond to all emergency situations, fire alarms, and natural catastrophes.</li><li>Study and know the site-specific emergency manual(s).</li><li>Assist tenant and emergency personnel in swift and careful evacuations when appropriate.</li></ul>Other:<ul><li>Communicates regularly with management, vendors, equipment repair, maintenance, and tenants for day-to-day operational issues.</li><li>Participate in continuous improvement/quality initiatives and identify improvements to, and/or develop new, products, services, or processes to result in the discovery of more efficient and effective methods and/or new offerings.</li><li>May assist with groundskeeping duties such as mowing, weed control, tree/shrub trimming, depending on the property and need.</li><li>May be responsible for snow removal such as shoveling snow and de-icing walkways, etc, depending on the property and need.</li><li>Assist and/or back up coworkers.</li></ul>Responsibilities include 60% property maintenance, 25% community cleaning, 10% customer service, and 5% business administration.Equipment Issued If expected to carry a mobile phone, eligible for a monthly reimbursement or Centerspace issued phone, according to company policy.&nbsp; May have access to a shared company vehicle.&nbsp; Eligible for mileage reimbursement, according to company policy, when no&nbsp;Centerspace owned vehicle is available.Travel Required Some local travel may be required.Education &amp; Experience<ul><li>Required:&nbsp;2+ years of previous maintenance experience.</li><li>Preferred: Trade school education.</li><li>Certifications and/or Licenses: Have or willing to attain EPA, CPO, and/or boiler operator’s license as required.</li></ul>Knowledge, Skills, &amp; Abilities<ul><li>Language Skills – Ability to read and interpret documents such as safety rules, operating and maintenance instructions, MSDS sheets, and procedural manuals. Ability to communicate effectively with supervisor, tenants and vendors.</li><li>Mathematical Skills – Ability to add, subtract, multiply and divide. Calculate figures and amounts such as proportions, percentages, area, ratios, circumference, and volume.</li><li>Reasoning Ability – Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.</li><li>Computer Skills – To perform this job successfully, an individual must be able to efficiently use and navigate on the internet and use web based timekeeping software. Experience with work order systems beneficial.</li></ul>Physical RequirementsWhile performing the duties of this job, the employee is required:<ul><li>Constantly (66-100% of the time) - to be on feet, stand, walk; bend, stoop, squat, kneel; use hands and fingers to grasp, grip, turn and feel; reach above shoulders, push, pull, lift and carry; operate equipment and tools; climb stairs and ladders; balance; and talk and hear or effectively and safely communicate. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Lift or move up to 25 pounds.</li><li>Frequently (33-66% of the time) - lift and/or move up to 75 pounds, write reports and drive vehicles.</li><li>Occasionally (1-33% of the time) - sit; lift and/or move more than 75 pounds, although usually with the assistance of another employee and/or equipment.</li></ul>To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required.&nbsp; Additional details regarding competencies and other duties are available upon request.&nbsp; Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of this position.“Centerspace is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind:&nbsp;Centerspace is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment.&nbsp;All employment decisions at Centerspace are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, […], family or parental status, or any other status protected by the laws or regulations in the locations where we operate.&nbsp;Centerspace will not tolerate discrimination or harassment based on any of these characteristics. Centerspace encourages applicants of all ages.”

Centerspace

Service (Maintenance) Specialist - $1500 SIGN-ON BONUS

ResponsibilitiesHowmet Engines has an immediate opening for a Maintenance Technician-Mechanic&nbsp;to assist in the maintenance process at our facility in Rochester, NY.&nbsp;Basic Functions:&nbsp;Work in a fast-paced manufacturing facility to assist install, maintain, and repair machinery, equipment, physical structures, and pipe and electrical systems in commercial or industrial establishments by performing the following duties.&nbsp;Responsibilities:<ul> <li>Perform routine preventative maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, and the physical condition of the building does not deteriorate: <ul> <li>Visually inspect and test machinery and equipment</li> <li>Listen for unusual sounds from machines or equipment to detect malfunction and discuss machine operation variations with supervisors or other maintenance technicians to diagnose the problem or repair the machine</li> <li>Inspect drives, motors, and belts, check fluid levels, replace filters, and perform other maintenance actions, following checklists</li> <li>Clean and lubricate shafts, bearings, gears, and other parts of machinery</li> </ul></li> <li>Troubleshoot and repair various aspects of production machinery, including saws, hydraulic presses and associated forging equipment: &nbsp; <ul> <li>Repair and replace mechanical components and assemblies, including install of forging dies and fixtures, bearing assemblies, chains, belts and sliding component wear plates</li> <li>Troubleshoot, diagnose and repair electrical issues, from control power (transforms, power supplies, contactors, relays, motor starters and overloads) to 480V distribution and motors</li> <li>Troubleshoot, diagnose and repair hydraulic issues including loss of system pressures, cylinder actuation, pump or valve leaks or malfunctions; replace hydraulics pumps, motors, cylinders valves and other associated components</li> <li>Plan and lay out repair work using diagrams, drawings, blueprints, maintenance manuals, and schematic diagrams</li> <li>Align and balance new equipment after installations</li> </ul></li> <li>Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices</li> <li>Operate cutting torches or welding equipment to cut or join metal parts</li> <li>Operate overhead cranes and hoists, forklifts, scissor and boom lifts</li> <li>Maintain a safe and organized workstation and follow all Company policies, safety, and procedures</li> <li>Record maintenance and repair work performed</li></ul>QualificationsBasic Qualifications:&nbsp;<ul> <li>High school diploma or GED is required</li> <li>3-5 years of experience</li> <li>Ability to calculate figures and amounts and apply concepts of basic algebra and geometry</li> <li>Must be able to carry out instructions furnished in written, oral, or diagram form</li> <li>Ability to deal with problems involving several concrete variables in standardized situations.&nbsp;</li> <li>Must be certified to operate a forklift and man lift to all approved OSHA and Howmet standards.&nbsp;</li></ul><ul> <li>Salary Range:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; $24-$25 per hour</li></ul>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Howmet Aerospace

Maintenance Technician-Mechanic Temp to Hire

Position Title: Maintenance II/Grounds Department: Plant Operations and Maintenance (POM) Division: Facility, Plant, Operations and Maintenance (FPO) Employee Status: Full Time (Monday-Thursday 7am-5pm) Type: Support Staff Association (SSA UNION) Grade: 8 Salary: ($19.03 - $20.87 hourly) FLSA: Non-exempt ____________________________________________________ Reporting Relationships Reports to: Director Plant Operations and Maintenance (POM) Supervision Exercised: None &nbsp; Job Summary Under the supervision of the assigned supervisor, perform skilled, semi-skilled, or unskilled grounds maintenance work and other related work as requested. &nbsp; Essential Duties and Responsibilities include the following. Related duties may be assigned. &nbsp; 1. Perform various manual labor tasks including loading, unloading, lifting, and moving materials. 2. Operate grounds maintenance equipment. 3. Assist in the maintenance and planting of lawn areas, flower beds, weeding and tree trimming. 4. Paint, stain and finish various campus surfaces. 5. Assist with snow removal. 6. Have knowledge of commonly used concepts, policies, procedures, and safety measures. 7. Perform minor repairs and maintenance on lawn and garden equipment. 8. Apply pesticides and fertilizer. 9. Assist with cold-patching of asphalt. 10. Maintain athletic fields. 11. Regular attendance is expected. 12. Using tact and courtesy, the ability to establish and maintain effective relationships with persons contacted in the course of work. &nbsp; Physical Abilities 1. Visual ability to read handwritten or typed documents, instructions, the display screen of various equipment and machines, and blue prints and schematics. 2. Able to conduct verbal conversation. 3. Able to hear normal range verbal conversation (approximately 60 decibels). 4. Able to sit, stand, stoop, kneel, bend, and walk. 5. Able to climb slopes, stairs steps ladders. 6. Able to push and/or pull a variety of tools, equipment and objects weighing up to 40 pounds. Able to lift up to 40 pounds frequently, and 60 pounds occasionally. 7. Able to sustain strenuous manual labor for 10 hours, with 3 breaks. 8. Able to exhibit full range of motion for shoulder external rotation an internal rotation. Able to exhibit full range of motion for shoulder abduction and adduction. Able to exhibit full range of motion for elbow flexion and extension. Able to exhibit full range of motion for shoulder extension and flexion. Able to exhibit full range of motion for back lateral flexion. Able to exhibit full range of motion for hip flexion and extension. Able to exhibit full range of motion for knee flexion. 9. Able to use respirators, for personal protection, up to: 2 hours per day, strenuous physical effort, 3 hours per day, moderate physical effort, 6 hours per day, light physical effort. 10. Able to work at various elevated heights in ladders, scaffolding, rigging and roofs in a safe and effective manner. Able to work in restricted spaces in a safe and effective manner. 11. Able to work with a variety of chemical agents in a safe and effective manner without allergic reaction. 12. Able to demonstrate manual dexterity necessary to perform fine maintenance procedures and operate both manual and power hand tools in a safe and effective manner. 13. Able to operate a variety of powered industrial vehicle equipment, and tools associated with building repair, maintenance, preventative maintenance and construction in a safe and effective manner. 14. Able to operate a variety of maintenance motor vehicles in a safe and effective manner. &nbsp; Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. &nbsp; Minimum Qualifications Hold and maintain a valid Motor Vehicle Operator’s License, proper insurance, and a driving record satisfactory to the College required. 1. Class B CDL is preferred. 2. Pass a required physical examination and background check required. 3. At least two years’ experience in general maintenance work preferred. 4. Completion of 12th grade or equivalent preferred. 5. General knowledge of one or more of the building trades or apprenticeship in one or more of the building trades preferred. 6. Pesticide operator license preferred. 7. Ability to follow written and oral instructions. &nbsp; ADDENDUM TO CLASSIFICATION/JOB DESCRIPTION &nbsp; LIABILITY, PROTECTION AND SETTLEMENT FUND CHECKLIST &nbsp; The College’s top administration, building directors, and maintenance staff have a responsibility to monitor the physical plant for defects, problems and activities utilizing the facilities that may expose the college to a liability situation. The following list represents the type of items that should be monitored: &nbsp; 1. any defects or deficiencies in machines, tools, and equipment; 2. the existence of any pot holes in the parking lots or in the asphalt walkways; 3. any problems with stairs, carpets, and tiles; 4. any ice or debris on walk areas; 5. any unsafe or broken chairs or furniture; 6. any damage to safety signs or devices; 7. any burnt out, broken or not turned on lighting; and 8. any activities by students, staff, or faculty which might cause damage to property or persons (leaving doors unlocked, speeding on campus, etc.)

747 Facilities and Maintenance Jobs