field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Position Purpose: Performs maintenance services, installation or repairs in one or more skill areas such as plumbing, mechanical, electrical repairs, pneumatic, hydraulic, installation, carpentry, painting or vehicle servicing. Primary Duties/Responsibilities: <ul><li>Performs routine and preventative maintenance, lubrication and minor adjustments on machines and related equipment which may include pumps, engines, centrifuges, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed and odor control, disinfection equipment, vacuum filters and belt presses. Promptly reports any operational problems with machines or equipment to Lead or Supervisor.</li><li>Learns to inspect and becomes proficient at mechanical troubleshooting to determine repairs needed. Dismantles equipment to gain access to and repairs defective parts using hand tools, power tools and precision measuring and testing devices. Re-assembles and tests equipment ensuring safe and efficient operating conditions are restored. Learns to troubleshoot hydraulic, pneumatic and electronic equipment and instrumentation.</li><li>Performs facility maintenance and repair and may replace or install light bulbs, fluorescent tubes, damaged glass, windows, doors, partitions, ceiling or floor tiles, door locks, carpet, and/or paint.</li><li>May perform manual labor including cleaning equipment, facilities and grounds as required and properly disposes of waste according to safety and environmental policies. Operates vehicles for plant operational purposes.</li><li>Learns to estimate time and material costs for various projects. May assist in other areas of plant as directed.</li></ul> Work Environment: <ul><li>Spends 100% of the time in the operations environment.</li><li>Typically spends 25 - 35% of time exposed to outdoor and sometimes inclement weather.</li><li>Company service vehicles are used as required.</li><li>Travels 1 - 2 times per year for company provided training.</li><li>May serve rotational 24-hour emergency on-call.</li><li> Possible Work Hazards : May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards.</li></ul> Qualifications Education/Experience/Background: <ul><li>High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions.</li><li>Six months to two years of experience in a related position with ability to comprehend specifications, blueprints and manuals.</li><li>Experience using power, pneumatic, hydraulic, and hand tools and shop tools such as drill press, band saw, bench grinder, and torque wrench preferred.</li><li>Experience using material handling equipment, pressure gauges and precision measuring instruments.</li></ul> Knowledge/Skills/Abilities: <ul><li>Ability to perform basic mathematical calculations.</li><li>Some vocational training and mechanical aptitude preferred, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment.</li><li>Must have ability to operate Computer Maintenance Management System (software).</li><li>Must consistently demonstrate the ability to learn and independently perform assigned duties and meet or exceed production and quality goals.</li><li>Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily.</li></ul> Required Certification/Licenses/Training: <ul><li>Must possess a valid driver's license and a safe driving record.</li><li>Employee Orientation, Departmental Operating Procedures, Safety, Confined Space training, OSHA and Quality Training.</li><li>Must become proficient in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, gas detectors, confined space equipment, etc.)</li><li>Training in operation of mechanical drives, hydraulic pumps and valves, pneumatics, electronics and control systems.</li><li>Obtain or maintain CWEA Mechanical Technologist certification preferred</li><li>Training in the use of energy management systems as needed.</li><li>Works toward increasing skills in additional functional areas or in obtaining advanced skills / maintenance certifications</li></ul> Physical Requirements: <ul><li>Amount of time spent - Standing 25%, Walking 75% for as many as five miles per shift.</li><li>Requires close visual and hearing observation to detect non-conformance and machine malfunction.</li><li>Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms.</li><li>Works in various positions; works on ladders, catwalks, and supports at heights of 50 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds.</li><li>Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 10 feet.</li><li>Occasional stooping, bending or kneeling and entering confined spaces.</li></ul> Additional Information Pay Range: $30.00 to $43.00 per hour. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Industrial Maintenance Technician I-III

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.CompensationThe base hourly rate for this position is $31.35.Essential Functions:· Responsible for the completion of all maintenance requests assigned· Maintain equipment and systems for maximum productivity levels· Perform a wide variety of general building maintenance repairs and services· Assist in monitoring all work being performed by outside contractors· Support personal and plant safety by carrying out assigned safety work orders and identifying potential hazards· Identify any equipment issues and bring to supervisors attention· Identify potential equipment or capital improvements· Support the plant environmental goals through PM’s and inspections· Assist with the preventative maintenance schedule and assign work· Responsible for general housekeeping of maintenance shop area and parts storage area· Be available to provide project assistance with design, quotes, contractor directions and maintenance support· Contribute input in the development of maintenance budgets and control spending to the plan· Awareness of tracking and improving on key asset care and reliability metricsSafety Responsibilities:· Obey all plant safety rules and regulations· Complete all required safety training and pro-metrics· Report all unsafe conditions· Wear all P.P.E. in areas where required· Supports and promotes safe practices and environmental commitments in alignment with company commitments, policies, and compliance requirementsDue to the changing nature of our business, your job description will inevitably change. You will, from time to time, be required to undertake the other activities of a similar nature that fall within your capabilities as directed by management.Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Johns Manville

Maintenance Technician 1-2

Maintenance Technician 1-1

THE OPPORTUNITY<ul><li>Do you get energized by the opportunity to utilize your talents to oversee and manage facilities operations and CAPEX projects?</li><li>Are you a strategic leader ready to drive operational excellence in a fast-paced, high-volume environment?</li><li>Are you eager to make a direct impact at a $1B+ industry leader known for world-famous brands like Jose Cuervo?</li></ul>ABOUT THE COMPANYProximo Spirits, Inc., is a $1B+ American multinational alcoholic beverage company, with its headquarters in Jersey City, New Jersey. It is a major distributor of tequila and other spirits, best known for Jose Cuervo, the world's largest-selling tequila brand. With over 300 employees, the Lawrenceburg, IN facility (Proximo Distillers Indiana - PDI) bottles about 15 million cases a year for all North America.WHAT YOU’LL BE DOING Reporting to the Sr. Technical Manager, the Facilities and CAPEX Manager will be based in Lawrenceburg, IN and manage all aspects of the facility operations and capital expenditures. This position is responsible for ensuring the facilities are maintained to the highest standards to support business operations efficiently and effectively. She/He manages the planning, budgeting, and execution of capital projects to enhance and expand the facilities as needed.Key responsibilities include:FACILITIES MANAGEMENT<ul><li>Oversee the day-to-day operations of all company facilities, including offices, manufacturing plants, warehouses, and other properties.</li><li>Develop and implement maintenance programs to ensure that all facilities are maintained in optimal condition, including HVAC systems, electrical systems, plumbing, and general building maintenance.</li><li>Manage relationships with external vendors and service providers to ensure timely and cost-effective maintenance and repairs.</li><li>Monitor and manage facility budgets, including operating expenses and capital expenditures related to facility maintenance and upgrades.</li><li>Maintain the fire suppression system, ensuring its proper functionality, and ensuring compliance with all applicable legal requirements, codes and industry standards.</li></ul>CAPEX PLANNING/EXECUTION<ul><li>Collaborate with key stakeholders to identify facility needs and develop capital expenditure plans to support business objectives.</li><li>Conduct feasibility studies and cost-benefit analyses for proposed capital projects, including facility expansions, renovations, and equipment upgrades.</li><li>Develop comprehensive project plans, including timelines, budgets, and resource requirements, and oversee project execution from initiation to completion.</li><li>Coordinate with internal teams and external contractors to ensure that capital projects are completed on time, within budget, and in compliance with relevant regulations and quality standards.</li></ul>COMPLIANCE and RISK MANAGEMENT<ul><li>Ensure that all facilities comply with relevant health, safety, and environmental regulations and standards.</li><li>Identify and mitigate risks related to facility operations and capital projects, including safety hazards, regulatory compliance issues, and budget overruns.</li><li>Implement best practices and continuous improvement initiatives to optimize facility operations and mitigate risks proactively.</li></ul>CROSS-FUNCTIONAL COLLABORATION<ul><li>Collaborate closely with other departments, including Operations, Finance, Procurement, and Human Resources, to align facility management and CAPEX initiatives with overall business objectives.</li><li>Communicate regularly with internal stakeholders to provide updates on facility projects, budgets, and performance metrics.</li><li>Foster a culture of teamwork, accountability, and excellence within the facilities management team and across the organization.</li></ul>IDEAL CANDIDATE QUALIFICATIONS AND EXPERIENCE<ul><li>Bachelor's degree in Facilities Management, Engineering, Business Administration, or a related field required.</li><li>Food and Beverage GMPs.</li><li>Proven experience in facilities management, capital project management, and/or construction management, preferably in a manufacturing or industrial environment.</li><li>Strong leadership and management skills, with the ability to effectively lead cross-functional teams and drive results in a dynamic business environment.</li><li>Excellent communication, negotiation, and interpersonal skills, with the ability to build relationships and influence stakeholders at all levels of the organization.</li><li>Solid understanding of relevant regulations and standards related to facility operations, safety (Class I Div I Environment), and environmental compliance.</li><li>Proficiency in project management tools and software, as well as Microsoft Office Suite (Excel, Word, PowerPoint, Project).</li><li>Certification in facilities management (e.g., CFM) or project management (e.g., PMP) is a plus.</li></ul>KEY PERSONAL ATTRIBUTES<ul><li>Analytical - Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs work flows and procedures.</li><li>Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Organizes or schedules other people and their tasks; Develops realistic action plans.</li><li>Business Acumen - Understands business implications of decisions; Displays orientation to profitability; Demonstrates knowledge of market and competition; Aligns work with strategic goals.</li><li>Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyses information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics.</li></ul>THE PAYOFF Join a globally renowned leader in the spirits industry and the world’s largest tequila producer. This is a wonderful opportunity to make a significant impact and grow your career.DIVERSITY/INCLUSION STATEMENTGilman Partners is committed to strengthening leadership teams and elevating the talent in our communities – and that means all qualified applicants will receive consideration without regard to race, ability, religion, sex, age, sexual orientation, gender identity/expression, or national origin. You don’t have to meet every qualification in this job description to apply. If you’re drawn to the position and believe your experience makes you a good fit, we encourage you to reach out.

Proximo Spirits

Facilities and CapEx Manager

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.CompensationThe base hourly rate for this position is $34.40.Position Overview:This position is responsible for communicating and supporting JM core values and delivering the JM experience.The purpose of the Maintenance Technician’s role is to perform routine and non-routine maintenance on production and facility equipment to support production of roofing materials. This position is also responsible for meeting facility targets for safety, productivity, and machine uptime.&nbsp; This role will conduct effective problem solving and troubleshoot processes to develop corrective actions.Responsibilities:&nbsp; <ul><li>Follow all Johns Manville safety and environmental procedures and policies.</li><li>Attend plant safety and training meetings as scheduled.</li><li>Follow Job Safety Analysis (JSA's), uses safe work practices, and reports hazardous conditions at all times. Wear protective clothing &amp; equipment as required.</li><li>Develop JSA’s for new tasks and review JSA’s annually.</li><li>Perform routine and non-routine maintenance activities of mechanical and electrical systems.</li><li>Display advanced working knowledge of electrical (single phase and 3 phase), mechanical, hydraulics, and pneumatics systems.</li><li>Install and repair electrical conduit and cable, including connections, controls, grounding, etc.</li><li>Work from electrical and mechanical schematics to troubleshoot or install new or modify existing equipment.</li><li>Perform voltmeter, ammeter, wattmeter, and other electrical measurements.</li><li>Inspect equipment and reports on defective part and unsatisfactory conditions to further preventative maintenance program.</li><li>Maintain, adjust, service and lubricate equipment keeping it in good operating conditions with respect to proper aligning, functioning and lubrication of parts.</li><li>Participate in continuous improvement and Root Cause Corrective Action (RCCA) teams.</li></ul><ul><li>Assist co-workers as directed.</li><li>Perform and complete other work as assigned by supervisor.</li><li>Provides feedback and solutions to leadership on critical equipment issues pertaining to safety or operational capabilities</li><li>Display flexible outlook toward change management, working on cross-functional teams, training for the use of new tools and methodologies, and willingness and ability to obtain operating knowledge of all production equipment.&nbsp;&nbsp;</li><li>Participate in daily housekeeping efforts.&nbsp; Ensure job site is consistently clean after every job and clean maintenance shop after every shift.</li><li>May be required to perform other related duties as assigned</li></ul>Leadership Responsibilities:<ul><li>There are no supervisory responsibilities for direct reports for this position, but this person must have the skills to interact as a leader with all plant department employees.</li><li>Work with plant supervision to communicate the status of planned jobs, unplanned jobs waiting on parts, or unplanned jobs needing engineering or technical resources</li></ul>Requirements: (education, skills, and abilities)<ul><li>Must be signed off on all Maintenance Technician I job qualifications</li><li>2-5 years multi-craft maintenance experience</li><li>Strong commitment to safety</li><li>Ability to work well with others</li><li>Strong problem-solving capabilities</li><li>Excellent interpersonal and communications skills</li><li>Ability to work effectively in a fast-paced environment</li><li>Intermediate computer skills</li><li>Demonstrated ability to troubleshoot and handle multiple priorities and projects</li><li>Ability to disassemble, diagnose, repair, and perform preventative repair measures on mechanical equipment including, but not limited to: pumps, gearboxes, reducers, couplings, seals, rotating elements, blowers, fans, hydraulic units, valves, chillers, and compressors</li><li>Demonstrate advanced Mechanical aptitude, including pipe fitting, fabricating</li><li>Knowledge of use of hand tools and power tools</li><li>Knowledge of shop machinery, including hydraulic press, mill &amp; drill press, lathe, and saw(s) (band &amp; Chop)</li><li>General knowledge of building lighting systems</li><li>General knowledge of AC/heating systems</li><li>General knowledge of building fire alarm systems</li><li>Advanced knowledge of Lock, Tag, Clear, and Try program</li><li>General knowledge of PLC troubleshooting</li><li>General knowledge of VFD troubleshooting</li><li>Display understanding of 480V system to include arc-flash training and safe working practices per NFPA 70E</li><li>Ability to provide troubleshooting and diagnosis on process heating and cooling equipment</li><li>Ability to consistently make appropriate decisions while being flexible with regard to work assignments and priorities.</li></ul><ul><li>Local travel for training purposes</li></ul>Physical Requirements:The physical requirements of this position are: (these requirements are typical for most of our manufacturing roles)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <ul><li>The ability to stand for extended periods</li><li>The ability to manually lift, push or pull at least 50 pounds safely and with proper body mechanics, sometimes while in awkward positions.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Use of hands (repetitive motion, grabbing, feeling, sensing, pulling)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to work safely in a fast-paced, sometimes stressful work environment</li><li>The ability to safely and effectively work in an often-dusty work environment that experiences a broad range of temperatures (very hot to very cold).&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to withstand the rigors of working a 12(or 8)-hour rotating shift schedule.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to bend, stoop or kneel repetitively.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to reach or work above the shoulder&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li></ul>Incumbent must be physically able to perform essential job functions. Reasonable accommodation may be made to enable individuals with disabilities to perform essential job functions.Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Maintenance Tech II

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.CompensationThe base hourly rate for this position is $32.02.Position Overview:Day shiftThis position is responsible for communicating and supporting JM core values and delivering the JM experience.The purpose of the Maintenance Technician’s role is to perform routine and non-routine maintenance on production and facility equipment to support production of roofing materials. This position is also responsible for meeting facility targets for safety, productivity, and machine uptime.&nbsp; This role will conduct effective problem solving and troubleshoot processes to develop corrective actions.Responsibilities:&nbsp; <ul><li>Follow all Johns Manville safety and environmental procedures and policies.</li><li>Attend plant safety and training meetings as scheduled.</li><li>Follow Job Safety Analysis (JSA's), uses safe work practices, and reports hazardous conditions at all times. Wear protective clothing &amp; equipment as required.</li><li>Develop JSA’s for new tasks and review JSA’s annually.</li><li>Perform routine and non-routine maintenance activities of mechanical and electrical systems.</li><li>Display advanced working knowledge of electrical (single phase and 3 phase), mechanical, hydraulics, and pneumatics systems.</li><li>Install and repair electrical conduit and cable, including connections, controls, grounding, etc.</li><li>Work from electrical and mechanical schematics to troubleshoot or install new or modify existing equipment.</li><li>Perform voltmeter, ammeter, wattmeter, and other electrical measurements.</li><li>Inspect equipment and reports on defective part and unsatisfactory conditions to further preventative maintenance program.</li><li>Maintain, adjust, service and lubricate equipment keeping it in good operating conditions with respect to proper aligning, functioning and lubrication of parts.</li><li>Participate in continuous improvement and Root Cause Corrective Action (RCCA) teams.</li></ul><ul><li>Assist co-workers as directed.</li><li>Perform and complete other work as assigned by supervisor.</li><li>Provides feedback and solutions to leadership on critical equipment issues pertaining to safety or operational capabilities</li><li>Display flexible outlook toward change management, working on cross-functional teams, training for the use of new tools and methodologies, and willingness and ability to obtain operating knowledge of all production equipment.&nbsp;&nbsp;</li><li>Participate in daily housekeeping efforts.&nbsp; Ensure job site is consistently clean after every job and clean maintenance shop after every shift.</li><li>May be required to perform other related duties as assigned</li></ul>Leadership Responsibilities:<ul><li>There are no supervisory responsibilities for direct reports for this position, but this person must have the skills to interact as a leader with all plant department employees.</li><li>Work with plant supervision to communicate the status of planned jobs, unplanned jobs waiting on parts, or unplanned jobs needing engineering or technical resources</li></ul>Requirements: (education, skills, and abilities)<ul><li>Must be signed off on all Maintenance Technician I job qualifications</li><li>2-5 years multi-craft maintenance experience</li><li>Strong commitment to safety</li><li>Ability to work well with others</li><li>Strong problem-solving capabilities</li><li>Excellent interpersonal and communications skills</li><li>Ability to work effectively in a fast-paced environment</li><li>Intermediate computer skills</li><li>Demonstrated ability to troubleshoot and handle multiple priorities and projects</li><li>Ability to disassemble, diagnose, repair, and perform preventative repair measures on mechanical equipment including, but not limited to: pumps, gearboxes, reducers, couplings, seals, rotating elements, blowers, fans, hydraulic units, valves, chillers, and compressors</li><li>Demonstrate advanced Mechanical aptitude, including pipe fitting, fabricating</li><li>Knowledge of use of hand tools and power tools</li><li>Knowledge of shop machinery, including hydraulic press, mill &amp; drill press, lathe, and saw(s) (band &amp; Chop)</li><li>General knowledge of building lighting systems</li><li>General knowledge of AC/heating systems</li><li>General knowledge of building fire alarm systems</li><li>Advanced knowledge of Lock, Tag, Clear, and Try program</li><li>General knowledge of PLC troubleshooting</li><li>General knowledge of VFD troubleshooting</li><li>Display understanding of 480V system to include arc-flash training and safe working practices per NFPA 70E</li><li>Ability to provide troubleshooting and diagnosis on process heating and cooling equipment</li><li>Ability to consistently make appropriate decisions while being flexible with regard to work assignments and priorities.</li></ul><ul><li>Local travel for training purposes</li></ul>Physical Requirements:The physical requirements of this position are: (these requirements are typical for most of our manufacturing roles)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <ul><li>The ability to stand for extended periods</li><li>The ability to manually lift, push or pull at least 50 pounds safely and with proper body mechanics, sometimes while in awkward positions.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Use of hands (repetitive motion, grabbing, feeling, sensing, pulling)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to work safely in a fast-paced, sometimes stressful work environment</li><li>The ability to safely and effectively work in an often-dusty work environment that experiences a broad range of temperatures (very hot to very cold).&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to withstand the rigors of working a 12(or 8)-hour rotating shift schedule.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to bend, stoop or kneel repetitively.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to reach or work above the shoulder&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li></ul>Incumbent must be physically able to perform essential job functions. Reasonable accommodation may be made to enable individuals with disabilities to perform essential job functions.Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Maintenance Technician

Join the Clean Energy RevolutionBecome&nbsp;a&nbsp;Small Generation Interconnection &amp; Added Facilities, Project Manager&nbsp;at Southern California Edison (SCE) and build a better tomorrow. In this job, you’ll work in the Small Generation Interconnection &amp; Added Facilities (SGI&amp;AF) group within Southern California Edison's Transmission &amp; Distribution (TDBU). &nbsp;The successful candidate will ensure that all SGI&amp;AF policies and procedures are standardized, updated, documented, and adhered to by internal and external customers. &nbsp;This position will be the point of contact between the Grid Contract Development &amp; Management group (GCDM) and Distribution Engineering for customer interconnection submittals and will also act as the SME for the Planning department on all Added Facilities projects.&nbsp; Key Focus of Role&nbsp;<ul><li>Monitoring maintenance and inspection contractual obligations for all Added Facilities equipment.</li><li>Project Managing scope, schedule, and cost for the Solar Photovoltaic Program (SPVP) and other Small Generation Interconnection Agreements (SGIAs).</li><li>Assisting in designing, managing, and improving processes related to Distribution Added Facilities, SPVP, and SGIAs using tools and report mechanisms currently in place and those to be developed.</li><li>Lead a dynamic team of multi-functional professionals, by serving as the primary liaison for your division, to ensure seamless operations and adherence to established guideline</li><li>Guiding and overseeing Design and Construction functions to ensure facilities are placed In-service.</li><li>Identifying and handling any major AF/ SPVP/ SGIA issues.</li><li>Assisting in developing and facilitating reporting processes for all projects within their respective Division to ensure compliance.</li><li>Performing other responsibilities and duties as assigned.</li></ul>As a&nbsp;Small Generation Interconnection &amp; Added Facilities, Project Manager, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?<h4>Responsibilities</h4><ul><li>Manage one or more moderatly complex projects effectively using project management principles, tools, and techniques under time constraints, shifting priorities, and making critical decisions with minimal supervision</li><li>Responsible for directing project initiation, planning, execution, control, and closure for core disciplines of project management (scope, schedule, and budget) independently</li><li>Lead simple to moderately complex projects and deliver on team goals by influencing stakeholders within the department and exercising independent decision making, with consultation from leadership as needed</li><li>Collaborates with peer Project Managers, department/division senior leadership, and other stakeholders departments as a key consultant to provide recommendations to drive projects forward</li><li>Manage planning, development, and/or execution of electric transmission/distribution projects, which may include but is not limited to, wildfire, infrastructure replacement, load growth, poles, line upgrades, maintenance, or installations</li><li>Drive milestones and report on medium to large transmission and/or distribution projects which may include designs, schedules, projects applications, compliance and safety documentation, regulatory filings, and local and state agency coordination</li><li>Performs complex power flow and fault analysis studies to determine system impacts and requirements for transmission lines</li><li>Facilitates the progress of development plans, work packages, testing procedures, and energization sequences</li><li>A material job duty of all positions within the Company is ensuring the protection of all its physical, financial and cybersecurity assets, and properly accessing and managing private customer data, proprietary information, confidential medical records, and other types of highly sensitive information and data with the highest standards of conduct and integrity.</li></ul><h4>Minimum Qualifications</h4><ul><li>Seven or more years of experience in project management.</li></ul>Preferred Qualifications<ul><li>One or more years of experience working in the Utility Industry.</li><li>Experience leading and implementing small to medium scale electric utility projects, including identifying, maintaining, and adjusting the cost, scope, and resources, managing vendors, and overseeing the formal planning, tracking, and reporting of project performance.</li><li>Experience with Solar Photovoltaic Program (SPVP), or other Small Generation Interconnection Agreements (SGIAs).</li><li>Experience with service planning principles, overhead/underground construction standards, and distribution design standards.</li><li>Experience interfacing effectively and collaborating with clients, peers, and all levels of management to develop solutions and ensure stakeholder approval.</li><li>Experience with effective resource and project planning, decision making, results delivery, and team building.&nbsp;</li><li>Experience developing and delivering technical presentations to both technical and non-technical audiences.</li><li>Experience and knowledge of Electric Rule 21 and other Tariff rules governing SCE.</li><li>Experience using Microsoft Word, Excel, PowerPoint, Access, Visio, List, and Project.</li><li>Project Management certification.</li></ul>Additional Information<ul><li>This position’s work mode is&nbsp;hybrid.&nbsp;The employee will report to an SCE facility for a set number of days with the option to work remotely on the remaining days.  Unless otherwise noted, employees are required to work and&nbsp;reside in the state of California.  Further details of this work mode will be discussed at the interview stage.&nbsp;The work mode can be changed based on business needs.</li><li>Visit our&nbsp;Candidate Resource&nbsp;page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!</li><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.</li></ul><ul><li>The primary work location for this position is Pomona, CA (Pomona Innovation Village - PIV). &nbsp;However, the successful candidate may also be asked to work for an extended amount of time at Wildomar, CA&nbsp;or Redlands, CA&nbsp;Service Centers.</li></ul><ul><li>Position will require up to 50%&nbsp;traveling and being out in the field throughout the&nbsp;SCE service territory.&nbsp;</li><li>Relocation does not apply to this position.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world. Southern California Edison is a proud Equal Opportunity Employer, including disability and protected veteran status. We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

Southern California Edison

Small Generation Interconnection & Added Facilities, Project Manager

SUMMARY:&nbsp; The Facilities Maintenance Technician is responsible for daily support and execution of campus facilities maintenance, custodial services and other general campus operations.&nbsp; Incumbent must strive to provide a safe, clean and efficiently operating campus environment supportive of learning and growth.&nbsp; This role requires the familiarity with cleaning procedures, chemicals, cleaning equipment as well as a variety of trades including, but not limited to basic plumbing, carpentry, minor electrical, roofing, landscaping and various HVAC systems.&nbsp; Qualified applicants must perform as the main point of contact for all campus facility related requests, while adhering to all safety protocols. University philosophy is considered in carrying out duties and responsibilities of position: quality services to clients (students, faculty, staff &amp; visitors); development, growth, involvement, and recognition of employees; sound economic principles; and environment which is conducive to innovation, positive thinking and expansion. KEY JOB ELEMENTS: <ul><li>Clean and monitor the campus facilities to ensure a safe, clean, efficiently operating and productive work environment. </li><li>Meet with campus vendors, contractors, security and suppliers as directed by Facilities Management. </li><li>Coordinate and execute facilities/grounds maintenance and janitorial needs as directed by Facilities Management, may work alone or with a crew. </li><li>Assist Facilities Management in schedule and organize any service work performed by technicians, vendors and contractors relative to repairs, cleaning and security operations. </li><li>Perform maintenance repairs for basic plumbing, minor electrical, carpentry, HVAC systems, roofing and general landscaping. </li><li>Consult with Facilities Management before calling in outside services or contractors. </li><li>Conduct regular building rounds and submit reports to Facilities Management to ensure your area of responsibility is clean and that cleaning and maintenance crews are keeping their assigned facilities clean and equipment in working order. </li><li>Respond to client inquires and complaints. Ensure timely and quality service delivery to clients. Follow up with clients to ensure customer satisfaction. </li><li>Setup group moves and events within campus and set the example by maintaining your assigned area clean and direct cleaning staff to ensure their areas are clean and orderly. </li><li>Maintain office and desk key inventory including inventory control and an accurate list of keys assigned to employees and contractors. </li><li>Maintain a detailed understanding of the campus facilities systems and equipment </li><li>Order and maintain inventory of building materials and supplies as required </li><li>Ensure South University standards of performance and safety are maintained. </li><li>Keep and maintain accurate work records </li><li>Other duties as needed. &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; </li></ul>REQUIREMENTS:&nbsp;<ul><li>High school degree required. </li><li>2-5 years of solid experience in the maintenance industry preferably in a post-secondary institution. </li><li>Understands working methods and procedures used in cleaning and minor maintenance of buildings </li><li>Understands qualities and uses of all cleaning equipment and maintenance tools </li><li>Excellent written and verbal communication skills. Strong interpersonal skills with a wide variety of populations. </li><li>Superior organization, prioritization, self-motivation, and problem resolution skills. </li><li>Ability to analyze problems and recommend solutions. </li><li>Must be a well-rounded individual who can perform on a variety of cleaning and maintenance tasks each day. </li><li>Ability to interact effectively as a leader or a team member and work collaboratively with other departments. </li><li>Ability to listen to customers (students, faculty, staff and visitors) and to understand and respond positively to their requests </li><li>Ability to work without close supervision and to set one’s own priorities. </li><li>Ability to frequently lift up to 25 pounds and occasionally lift up to 50 pounds. </li><li>Ability to stand and walk for lengthy periods of time. </li></ul>Physical or Sensory Demands:&nbsp;<ul><li>Frequently lift up to 25 pounds, occasional heavy lifting of up to 50 pounds </li><li>Occasionally climbs up to 15 feet with a ladder </li><li>Exposure to heavy dust, dirt, chemical or paint fumes, or other airborne matter </li><li>Exposure to extreme heat, electric current, hazardous chemicals or other potential hazards </li><li>Sitting or standing for extended periods with no control over rest periods </li><li>Pushes/pulls brooms, vacuums, buffers, scrubbers, cleaning carts </li><li>Must bend, stoop and crawl and occasionally operate hedge trimmers, pressure washers and leaf blowers </li></ul>ENVIRONMENT:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. The term "qualified individual with a disability" means an individual with a disability who, with or without reasonable accommodation, can perform the essential functions of the position.&nbsp; While performing the duties of this job, the employee is regularly required to communicate professionally in person, over the telephone, video conference, through&nbsp;email and other electronic means, move about the office or school, handle various types of media and equipment, and visually or otherwise identify, observe and assess.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; South University is an Equal Opportunity Employer and embraces diversity as a critical step in ensuring employee, student and graduate success. We are committed to building and developing a diverse environment where a variety of ideas, cultures and perspectives can thrive.

South University

Facilities Maintenance Technician 

<h4>Our Culture</h4>EDP is a rapidly growing company — with deep experience in retail and commercial propane sales, operations and finance. We provide safe, reliable propane service to residential, commercial, industrial, and agricultural customers from Connecticut to California.We service more than&nbsp;200,000&nbsp;customers in&nbsp;24&nbsp;states, with a presence in rural America as well as in major metropolitan areas. We have become a significant player in the propane industry, recognized in 2022, 2023 and 2024 as one of the Top Ten Propane Marketers by&nbsp;LP Gas Magazine. Since our inception in 2012, EDP has helped more than 44 owners of well-run propane businesses transition to their own “next chapter” while benefiting everyone involved.Responsibilities:<ul><li>Installing, inspecting, and maintaining propane tanks, lines, and equipment</li><li>Conducting leak tests, pressure checks, and system performance evaluations</li><li>Performing repairs and troubleshooting on propane systems and appliances</li><li>Educating customers on safe propane usage and providing exceptional customer service</li><li>Collaborating with the sales team to identify potential sales opportunities and upsell products or services</li><li>Maintaining accurate records of service calls, repairs, and inventory</li><li>Complying with safety regulations and industry standards at all times</li><li>Keeping up-to-date with propane industry trends, technologies, and best practices</li><li>This role includes on-call responsibilities, as the needs of the company require that you work past your regular departure time or otherwise outside of your regular work hours</li></ul>Requirements:<ul><li>High school diploma or general education degree (GED).</li><li>1-3 years of job-related experience (preferred).</li><li>Positive attitude, safe mindset, and great communications/customer skills.</li><li>CDL-Class B (Hazmat/Tanker) endorsements (must attain within 90 days of hire).</li><li>HVAC, Electrical, CTEP training (preferred, not required).</li><li>Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company’s insurance carrier.</li></ul> <h4>We Offer Amazing Benefits!</h4>In addition to competitive wages, we are proud to offer a comprehensive benefits package to help support the physical and financial health of our employees and their families.Our benefits program allows you to customize your coverage, to select the best plans to meet your family’s needs while taking advantage of tax savings. Eligible employees have the option to enroll in any of the following options with many of them offering pre-tax premium deductions to lower your taxable income, thereby reducing your income taxes.<ul><li>Medical Insurance – multiple options to choose from</li><li>Dental Insurance</li><li>Voluntary Vision Insurance</li><li>Health Savings Account</li><li>Flexible Spending Account</li><li>Confidential Employee Assistance Program (EAP)</li><li>Voluntary Supplemental Life and AD&amp;D Insurance</li><li>Voluntary Short-Term Disability</li><li>401(K) with Company Match</li><li>Tuition Reimbursement</li><li>Propane discount</li></ul>As part of your comprehensive compensation package, we provide eligible employees with the following benefits at no cost:<ul><li>Paid Holidays &amp; Time Off</li><li>$50,000 Basic Life/AD&amp;D benefit</li><li>Long Term Disability</li></ul>Equal Opportunity Employer Minorities/Women/Protected Veterans/DisabledThis job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Service Technician

<h4>Our Culture</h4>EDP is a rapidly growing company — with deep experience in retail and commercial propane sales, operations and finance. We provide safe, reliable propane service to residential, commercial, industrial, and agricultural customers from Connecticut to California.We service more than&nbsp;200,000&nbsp;customers in&nbsp;24&nbsp;states, with a presence in rural America as well as in major metropolitan areas. We have become a significant player in the propane industry, recognized in 2022, 2023 and 2024 as one of the Top Ten Propane Marketers by&nbsp;LP Gas Magazine. Since our inception in 2012, EDP has helped more than 44 owners of well-run propane businesses transition to their own “next chapter” while benefiting everyone involved.Responsibilities:<ul><li>Installing, inspecting, and maintaining propane tanks, lines, and equipment</li><li>Conducting leak tests, pressure checks, and system performance evaluations</li><li>Performing repairs and troubleshooting on propane systems and appliances</li><li>Educating customers on safe propane usage and providing exceptional customer service</li><li>Collaborating with the sales team to identify potential sales opportunities and upsell products or services</li><li>Maintaining accurate records of service calls, repairs, and inventory</li><li>Complying with safety regulations and industry standards at all times</li><li>Keeping up-to-date with propane industry trends, technologies, and best practices</li><li>This role includes on-call responsibilities, as the needs of the company require that you work past your regular departure time or otherwise outside of your regular work hours</li></ul>Requirements:<ul><li>High school diploma or general education degree (GED).</li><li>1-3 years of job-related experience (preferred).</li><li>Positive attitude, safe mindset, and great communications/customer skills.</li><li>CDL-Class B (Hazmat/Tanker) endorsements (must attain within 90 days of hire).</li><li>HVAC, Electrical, CTEP training (preferred, not required).</li><li>Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company’s insurance carrier.</li></ul> <h4>We Offer Amazing Benefits!</h4>In addition to competitive wages, we are proud to offer a comprehensive benefits package to help support the physical and financial health of our employees and their families.Our benefits program allows you to customize your coverage, to select the best plans to meet your family’s needs while taking advantage of tax savings. Eligible employees have the option to enroll in any of the following options with many of them offering pre-tax premium deductions to lower your taxable income, thereby reducing your income taxes.<ul><li>Medical Insurance – multiple options to choose from</li><li>Dental Insurance</li><li>Voluntary Vision Insurance</li><li>Health Savings Account</li><li>Flexible Spending Account</li><li>Confidential Employee Assistance Program (EAP)</li><li>Voluntary Supplemental Life and AD&amp;D Insurance</li><li>Voluntary Short-Term Disability</li><li>401(K) with Company Match</li><li>Tuition Reimbursement</li><li>Propane discount</li></ul>As part of your comprehensive compensation package, we provide eligible employees with the following benefits at no cost:<ul><li>Paid Holidays &amp; Time Off</li><li>$50,000 Basic Life/AD&amp;D benefit</li><li>Long Term Disability</li></ul>Pay- Starting at $28 per hour, depending on experience&nbsp;Equal Opportunity Employer Minorities/Women/Protected Veterans/DisabledThis job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

752 Facilities and Maintenance Jobs