field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

Immediately Hiring! 2nd Shift (3pm-11pm) - 8 Hour Shift Starting Rate: $36.23/hr+ based on experience Essential Duties: <ul><li>Repair and maintain machinery and mechanical equipment including; conveyor systems, pumps, piping, pneumatic systems, hydraulic systems, drives (belt, chain, and gear), CNC lathes (spindles, linear ways, gibbed box ways, ball-screws and nuts, couplings), CNC machining centers, and industrial robots.</li><li>Repair and maintain machinery and electrical equipment including; motors, variable frequency drives, soft starts, sensors, PLC's, automation (Fanuc, Mazak, etc.), and combustion burners.</li><li>Use a computerized maintenance management system (CMMS) to track work, enter time, repairs, request parts, and complete work orders.</li><li>production machines and equipment in accordance with diagrams, specifications and operator’s manuals</li><li>Dismantles devices and machines to gain access to and remove defective parts using hoists, hand tools, power tools, and cranes</li><li>Safely operates floor cranes, lift trucks, man lifts as needed to complete assigned tasks.</li><li>Adheres to Barberton safety programs as part of everyday work.</li></ul> Working Conditions: <ul><li>Second shift.&nbsp; Occasional evening and weekend work required.</li></ul> Physical Demands: <ul><li>Lifting :&nbsp; Moderately Heavy - Lift on an occasional basis a maximum of 75 pounds with frequent or&nbsp;constant lifting of 40 pounds.</li><li>Standing:&nbsp; Constantly (greater than 80% of workday)</li><li>Walking:&nbsp; Constantly (greater than 80% of workday)</li><li>Bending and Twisting:&nbsp; Constantly (greater than 80% of workday)</li><li>Temperature Extremes (percent of time working in non-climate controlled, production environment):&nbsp; Constantly (greater than 80% of workday)</li><li>Noise (percent of time working in noisy, production environment):&nbsp; Constantly (greater than 80% of workday)</li></ul> Basic Qualifications <ul><li>High School Diploma or GED from an accredited institution</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul> Preferred Qualifications <ul><li>Maintenance trade school training</li><li>Knowledge in the following areas</li><li>Welding (MIG and TIG)</li><li>Machine lubrication</li><li>Disassembly/assembly of precision equipment</li><li>Panel building</li><li>Precision maintenance (fasteners, laser alignment, greasing)</li><li>Experience working with industrial robots</li><li>Experience trouble-shooting and repairing CNC machinery to the board level (no board repairs)</li><li>PC literate with experience using Microsoft Office Suite</li><li>Minimum of five years' experience performing mechanical and electrical maintenance in a manufacturing environment</li></ul> Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> Howmet Wheel System is sold under Alcoa® Wheels brand which is a global leader in the commercial transportation industry, renowned for inventing the forged aluminum wheel in 1948. With a steadfast commitment to advancing technology, Alcoa Wheels has achieved a 35% weight reduction of forged aluminum wheels since 1996. The newest wheel ULT36 weighs a mere 36 lbs. Alcoa Wheels delivers breakthrough solutions with proprietary alloy and surface treatment technologies such as Dura-Bright®, Dura-Flange®, and Dura-Black®. All its innovative efforts make trucks, trailers, and buses lighter, more fuel-efficient, durable, and visually striking. With a global presence and extensive manufacturing capabilities, Alcoa® Wheels is dedicated to leading the industry toward a greener and more prosperous future.

Howmet Aerospace

Maintenance Technician - Wheel Plant (2nd Shift)

At NASCAR, you will find a community of passionate individuals who care about our sport and are united in seeing it grow.We are a company unlike any other. We want you to bring your experience, skills and passion to our close-knit, high-energy environment in which our employees thrive and where you can prosper. We know the key to our success is our employees and we offer highly competitive salaries, a solid benefits package focused on wellness, and opportunities for you to grow and develop both personally and professionally. It won’t take you long to find out that you are on the right track here at NASCAR!Bowman Gray Stadium is seeking a Track Maintenance Technician, Bowman Gray Stadium. This role plays a critical role in ensuring the safety, functionality, and appearance of the track facilities.&nbsp; The Track Maintenance Technician will perform routine maintenance tasks, repairs, and inspections to keep the track surface, guard rails, fencing, infrastructure, and surrounding areas in optimal condition for racing events and spectator enjoyment.&nbsp;Essential Duties and Responsibilities<ul><li>Conduct regular inspections of the track surface, barriers, fencing, and surrounding infrastructure to identify any signs of wear, damage, or hazards.</li><li>Perform routine maintenance tasks such as cleaning debris, repairing potholes, and patching cracks to ensure a smooth and safe racing surface.</li><li>Monitor track conditions during events and respond promptly to any maintenance issues or emergencies that may arise.</li><li>Maintain the landscaping and vegetation around the track perimeter, including mowing grass, trimming bushes, and removing weeds to enhance the visual appeal of the facility.</li><li>Ensure proper drainage by clearing drains, ditches, and culverts to prevent water buildup and flooding on the track surface.</li><li>Repair and maintain trackside structures, buildings, grandstands, and amenities such as restrooms, concession stands, and spectator seating areas.</li><li>Perform basic carpentry, painting, plumbing, and electrical repairs as needed to address maintenance issues and ensure the functionality of facilities.</li><li>Operate specialized maintenance equipment such as tractors, mowers, pressure washers, and small hand tools to perform maintenance tasks efficiently and safely.</li><li>Conduct regular inspections and routine maintenance on equipment to ensure proper functioning and extend service life.</li><li>Adhere to safety protocols and guidelines while performing maintenance activities, including the use of personal protective equipment (PPE) and following safe work practices.</li><li>Maintain compliance with environmental regulations and guidelines for waste disposal, chemical handling, and pesticide application as applicable.</li><li>Coordinate with other maintenance team members, event staff, and management to prioritize tasks, address maintenance needs, and ensure efficient operations.</li><li>Communicate effectively with supervisors, contractors, and vendors regarding maintenance schedules, repair projects, and supply orders.</li><li>Other duties as assigned</li></ul>Desired Skills and Experience<ul><li>High school diploma or general education degree (GED); additional technical training or certification in maintenance, landscaping, or a related field is preferred; </li><li>Prior experience in facility maintenance, groundskeeping, or landscaping, preferably in a sports venue or outdoor recreation facility.</li><li>Familiarity with maintenance techniques, including carpentry, plumbing, electrical, and mechanical repairs;</li><li>Familiarity with operating and maintaining maintenance equipment and tools safely and effectively; or one to three years related experience and/or training; or equivalent combination of education and experience.&nbsp;</li><li>Valid Driver License</li><li>Strong attention to detail and problem-solving skills to identify maintenance issues and implement solutions promptly.</li><li>Ability to perform manual labor, lift heavy objects, and work outdoors in various weather conditions.</li><li>Good communication skills and the ability to work effectively both independently and as part of a team.</li><li>Flexibility to work irregular hours, including evenings, weekends, and holidays, in alignment with the race schedule and event calendar.</li><li>Dependable and punctual, with a commitment to fulfilling assigned shifts and responsibilities according to the race schedule and event calendar.</li></ul>Apply Now!Learn more about this role and our team by applying at <a href="https://careers.nascar.com/&amp;nbsp" target="_blank">https://careers.nascar.com/&amp;nbsp</a>; for consideration.NASCAR is committed to fostering a diverse work environment where all employees feel valued and empowered. NASCAR is an Equal Opportunity Employer (EEO). We seek to attract and retain the best qualified people available. All qualified applicants will receive consideration for employment without regard to race, color, gender, gender identity and expression, age, national origin, disability, religion, sexual orientation, genetic information, pregnancy, veteran status or any basis that is protected by applicable law except where a bona fide occupational qualification exists.

NASCAR

Track Maintenance Technician, Bowman Gray Stadium

Howmet Aerospace, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Our Savannah Operations is a heavy industrial Forging manufacturing plant located in Midway, Georgia, employs approximately 170 people and is poised for growth! We have an immediate opening for an experienced Maintenance Electrician. Company Benefits: We offer eligible employees a strong benefits package designed to assist employees and their families with financial security, health and well-being. In addition to competitive pay, we offer a variety of benefit programs: <ul><li>Weekly pay; shift differential for night shift</li><li>Medical, Life, Dental, Vision, and other Company benefits</li><li>401(k) with Company retirement contribution and Company match&nbsp;</li><li>Performance Pay based on business performance</li><li>Vacation eligibility&nbsp;</li><li>Paid holidays</li></ul> Howmet Aerospace was voted one of the World's Best Employers by Forbes for 2022 and 2023!&nbsp; Apply today and join a great team of market leaders with a passion for helping our customers win! JOB SUMMARY: The Maintenance Electrician inspects, repairs, maintains, and assembles all equipment within the Production Facility. This includes Hydraulic Forge Presses, Natural Gas and Electric powered Furnaces, Product Conditioning Equipment, Overhead Cranes, Mobile Equipment, CNC Machines (Horizontal and Vertical Lathes), and Water Jets. &nbsp;This position is also responsible for supporting project related improvements such as running conduit, industrial machine installs, and general facility electrical support. Essential Functions: This is a representative summary of the major duties and responsibilities and is not all inclusive. Incumbent(s) may and may be required to perform additional, position-specific tasks. <ul><li>Maintain Equipment through the execution of the Preventative Maintenance (PM) program.</li><li>Troubleshoot and repair electrical issues causing equipment failures.</li><li>Prepare and maintain records detailing inspections, observations, and repairs on all equipment.</li><li>Consult equipment manuals, schematics, electrical diagrams, and engineering personnel to efficiently troubleshoot and solve equipment problems.</li><li>Demonstrate a general understanding of Mechanical, Hydraulic, and Electrical system principles.</li><li>Ability to operate heavy machinery such as Forklifts, Extended Boom Lifts, Scissors Lifts, and Production Equipment.</li><li>Troubleshoot/Repair facility and equipment pneumatic systems.</li><li>Electrical troubleshooting up to 480V.</li><li>Replace electrical motors, motor contactors, fuses, breakers.</li><li>Ability to work at heights to service overhead cranes.</li><li>Willingness to work with PLC’s and troubleshoot issues with equipment.</li><li>Comfortable working in dirty environments to support the hydraulic forge presses.</li><li>Ability to run conduit in an industrial application.</li><li>Ability to complete general Production Facility duties such as clearing debris, installing product racking, and other 5S initiatives.</li><li>Ability to work a rotating shift (Days/Nights) that supports a 24/7 operation.</li><li>Maintains a safe and organized workstation and follows all company policy, safety and procedures.</li><li>Performs all other duties as assigned.</li></ul> Knowledge/Skills/Abilities: <ul><li>Electrical Systems – Knowledge of general electrical systems and how to troubleshoot those systems. Able to safely work with 480V electrical systems. Awareness of required safety protocol while de-energizing 4160V electrical systems.</li><li>Hydraulic Systems – Knowledge of how hydraulic pumps, cylinders, valves, and accessory equipment works to generate desired equipment movement.</li><li>Mechanical Systems – Knowledge of general mechanical systems and how to troubleshoot those systems.</li><li>Equipment Preventative Maintenance — Monitoring gauges, dials, or other indicators to make sure a machine is working properly.</li><li>Troubleshooting — Demonstrate an ability to determine why equipment failed and make the necessary repairs to return equipment to Operations.</li><li>Communication — Ability to effectively and comfortably communicate technical information to others inside and outside of the Maintenance Department.</li><li>Production and Processing — General knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.</li><li>Quality Control Analysis — Conducting tests and inspections of equipment, products, services, or processes to evaluate quality or performance.</li><li>Reading Comprehension — Understanding written sentences and paragraphs in work related documents.</li><li>Critical Thinking — Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.</li><li>Basic functions of Microsoft Office Suite.</li><li>Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.</li></ul> Physical Demands: <ul><li>Continuously required to wear common Protective or Safety Equipment such as Safety Shoes, Glasses, Gloves, Hearing Protection, Hard Hats.</li><li>Continuously required to stand; walk; use hands to handle or feel; reach with hands and arms; and talk or hear.&nbsp;</li><li>Frequently required to stoop, kneel, crouch, or crawl.&nbsp;</li><li>Frequently required lift and/or move up to 50 pounds.&nbsp;</li><li>Occasionally required to sit.&nbsp;</li><li>Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.</li><li>Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.</li></ul> Work Location/Environmental Requirements: Nickel and titanium manufacturing facility. Exposure to: moving mechanical parts; wet and/or humid conditions; fumes or airborne particles; toxic or caustic chemicals; extreme cold, extreme heat, vibration; loud noise level Basic Qualifications: <ul><li>High School Diploma/GED from an accredited institution</li><li>Minimum 3 years of experience working with 480V electrical systems in an industrial environment or experience in one of these related fields (HVAC systems, Industrial PLC’s, or Electrical Trade School Completion).</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.&nbsp;</li></ul> Preferred Qualifications: <ul><li>Associates or bachelor’s degree from an accredited institution in maintenance related function.</li><li>5+ years of experience working with and troubleshooting 480V electrical systems in an industrial environment.</li><li>Experience working with Rockwell PLC’s.</li></ul> Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Maintenance Electrician

Title: Maintenance Technician
POSITION SUMMARY Under the supervision of the Maintenance Supervisor, performs basic maintenance and repairs to electrical, plumbing and other building systems and provides general carpentry, painting and commercial building repair/maintenance services across all seven of the College’s campuses.
ESSENTIAL JOB FUNCTIONS/JOB DUTIES AND RESPONSIBILITIES Responds to and completes work orders for various maintenance projects and requests in a timely manner. Performs basic plumbing maintenance, including repairing faucets, caulking fixtures, running clogged drain lines and rebuilding &amp; replacing plumbing fixtures. Performs electrical repairs, including replacing light fixtures, lightbulbs and electrical receptacles and switches.
Prepares, primes and paints interior and exterior building surfaces. Installs and repairs drywall, glass, handrails, window blinds, ceiling tile, carpet/floor tiles, baseboard molding, etc. Maintains and repairs doors, locks, closers. Repairs or replaces defective equipment. Conducts preventative repairs on an annual, monthly, weekly and daily basis as needed/assigned.
Travels to extended campuses as assigned to perform routine and preventative maintenance and to assess condition of buildings/systems. Maintains a parts, supplies and equipment inventory and advises supervisor when inventory needs to be replenished. Moves chairs, desks, file cabinets and other furniture and equipment. Assembles furniture as needed. Assists with indoor and outdoor College event set-up and break-down, including tables, chairs, podiums, risers, stages, drapes, banners, etc., along with other miscellaneous requests.
REQUIRED QUALIFICATIONS High school diploma or GED
Three (3) years’ building maintenance experience
Valid driver’s license
Must pass a background investigation, including a favorable motor vehicle record and criminal background report
PREFERRED QUALIFICATIONS Prior experience performing building maintenance for an organization with multiple locations/campuses
Prior building maintenance experience in a higher education setting
Completion of a relevant training program, such as electrical, plumbing or EPA Universal, or certification or licensure in a relevant trade
KNOWLEDGE, SKILLS AND ABILITIES Excellent customer service skills. Knowledge of basic construction, plumbing, electrical and preventive maintenance principles. Ability to safely use various tools and equipment, such as hammers, drills, saws, wrenches, snow shovels, compressors, golf carts, forklifts, motor vehicle, etc. Working knowledge of building systems, campus operational requirements and utility systems.
Basic computer skills, including familiarity with work order and preventative maintenance systems. Ability to frequently walk, stand, stoop, crawl, climb, bend, kneel, work on elevated surfaces, work in small/confined spaces, work overhead and be in awkward positions for extended period of time. Ability to regularly push, pull, lift, move and carry 30 to 50 pounds. Ability to work occasional nights and weekends as needed to support campus events and/or respond to maintenance and weather emergencies.
Open Until Filled: Yes
Rate of Pay: $37,186.50- $44,635.50 annually, depending on experience
Special Instructions to Applicants: Unofficial transcripts are acceptable for the application process. Official transcripts are required upon hire. Applicants may be subject to a background check.
Nashville State offers flexible work arrangements for positions that qualify.

Motlow State Community College


      Maintenance Technician
    

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.Pay Range$92,300.00-$126,900.00 AnnualThis is the base salary pay range that an applicant can expect to make upon hire. &nbsp; Pay within this range will vary based upon relevant experience, skills, and education among other factors. In addition, this position is eligible for an incentive bonus.&nbsp;The purpose of Maintenance Engineer II is to perform engineering work in operations, production, construction, or maintenance environments. The key responsibility of Maintenance Engineer II is to drive asset availability to an optimal balance between cost and output.Your Day to Day:<ul><li>Ensures equipment and facility function as planned to avoid downtime and scrap</li><li>Actively work with Process Engineers and Maintenance Department to solve process/equipment issues.</li><li>Defines equipment inspection and collects all maintenance requirements to allow an efficient working schedule in close collaboration with the plant engineer.</li><li>Identifies the need for major equipment repair and replacement, keeping in mind opportunities for improvement in efficiency, costs, environmental stewardship and safety.</li><li>Supports the organization of scheduled outages and maintenance stops of all assets and optimizes efficiency of these events.</li><li>Defines the preventive maintenance program based on analysis of downtime and failure patterns and recommendations of OEMs.</li><li>Execute the root cause for equipment failures and propose corrective action.</li><li>Plans, directs, and coordinates activities concerned with surveys, design, construction, modification, and maintenance of equipment and machinery in plant.</li><li>Directs execution of capital projects to meet timelines and approved costs.</li><li>Develops and reviews the work instructions and SOPs especially for rebuilding equipment.</li><li>Keeps drawings up to date using AutoCAD and directs major changes through contractor/engineering designer</li><li>Ensures compliance with established industry safety, environmental and design standards, and guidelines</li><li>Must be willing to respond to emergency situations outside normal schedule</li></ul>What You Bring to the Team:<ul><li>BS in Engineering (Mechanical Engineering preferred) and a minimum of 3 years of maintenance, plant, or engineering experience in a continuous manufacturing environment</li><li>Proven history of continuous improvement accomplishments</li><li>Excellent organizational and computer skills</li><li>Strong leadership skills that include a strong sense of ownership</li><li>Demonstrated ability to manage contractors</li><li>Experience with industrial mechanical design procedures and standards</li><li>Experience with analytical, engineering design calculation and problem-solving skills</li><li>Experience with AutoCAD and/or Solid Works</li><li>Solid knowledge of engineering drawings and process schematics</li><li>Must have a strong level of organizational and time management skills, with the ability to effectively manage multiple projects and prioritize tasks</li><li>Knowledge of Six Sigma/Lean Manufacturing Skills, such as DFSS and Lean Six Sigma</li><li>Experience with maintenance or process SAP roles preferred</li><li>Detailed follow up and documentation for project completion</li><li>Solid interpersonal, teambuilding, presentation, communication, written, and leadership skills</li></ul>Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Johns Manville

Maintenance Engineer II

Company Description About Veolia North America A subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a>. Job Description BENEFITS Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Position Purpose: Consistently leads an assigned team to inspect, maintain, repair and install mechanical, electromechanical, pneumatic and/or hydraulic equipment at plant and/or pump stations. Primary Duties/Responsibilities: <ul><li>In conjunction with supervisor, or in his/her absence, reviews daily team requirements. Oversees work assignments to ensure that schedules are met. May recommend changes to schedule to optimize production and/or reduce costs. Ensures that labor reporting is accurate and balances with labor tracking system. Provides feedback to Supervisor on labor, material and equipment demands needed to achieve schedule. </li><li>Monitors work assignments and ensures that team members are meeting or exceeding production and quality standards. Coaches and trains team members to increase skill level and to improve productivity, safety, quality and processes in a cost-effective manner. Trains team members to troubleshoot and resolve problems.</li><li>Provides technical guidance, troubleshoots, resolves or coordinates resolution of technical issues/problems on a proactive basis. Models and teaches finding cost effective solutions to tasks.</li><li>Prepares work orders either manually or from a Computer Maintenance Management System as required and prepares work related reports, procurement requisitions, charts, graphs and data submittal requirements in an accurate and timely manner. </li><li>Models safe work practices and provides leadership in achieving safety goals. May assist with safety training. Ensures that safety awareness is ongoing, that good housekeeping is practiced and that environmental and safety regulatory requirements are met. Reports potential problems to supervisor on a timely basis.</li><li>Performs duties of Maintenance Tech III as required.</li><li>May assist with maintaining parts, spares and maintenance procurement and inventory.</li><li>May assist in other areas of plant as directed. </li></ul> Work Environment: <ul><li>Spends 100% of the time in operations environment.</li><li>Typically spends 25 - 35% of time exposed to outdoor and sometimes inclement weather. </li><li>Company service vehicles are used as required. </li><li>Travels 1 - 2 times per year for company provided training. </li><li>May serve rotational 24-hour emergency on-call.</li><li> Possible Work Hazards : May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards.</li></ul> Qualifications Education/Experience/Background: <ul><li>High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions.</li><li>Ability to perform basic mathematical calculations.</li><li>Over five years of experience in a related position in a similar environment with ability to comprehend complex specifications, blueprints and manuals.</li></ul> Knowledge/Skills/Abilities: <ul><li>Vocational training and mechanical aptitude required, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment.</li><li>Demonstrates ability to mentor, coach and train others to identify cost effective solutions.</li><li>Must demonstrate ability to use computer programs for preparing work orders, work related reports, charts, graphs and data submittal requirements.</li><li>Must demonstrate proficiency in and model the care and use of all site specific, facility required PPE (Personal Protection Equipment).</li><li>Must consistently demonstrate the ability to perform all assigned tasks in an organized, accurate and timely manner and the ability to efficiently maintain, install and repair any equipment used in the facility. Fabrication and welding experience may be required, if necessary, at site.</li><li>Must have the ability to diagnose problems regardless of complexity, troubleshoot mechanical, electro-mechanical, hydraulic or pneumatic equipment and take corrective action within policy and procedure limitations.</li><li>Good verbal and written communication skills are necessary.</li><li>Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily.</li></ul> Required Certification/Licenses/Training: <ul><li>Minimum water/wastewater license as required by regulatory agencies at site.</li><li>Must possess a valid driver's license (commercial license and heavy equipment operator license is desirable) and a safe driving record.</li><li>Employee Orientation, Departmental Operating Procedures, Safety, OSHA and Quality Training.</li><li>HAZWOPER (Hazardous Waste Operations and Emergency Response)</li><li>Obtain or maintain HVAC, Electrician, Plumber's or other trade License if assigned to that area. Note: Will not perform duties unless properly licensed.</li><li>Forklift Certification if required by site.</li><li>May perform more advanced functions as part of training and development.</li><li>Must be able to serve rotational 24-hour emergency on-call if required by site.</li></ul> Physical Requirements: <ul><li>Amount of time spent - Standing 25%, Walking 75% for as many as five miles per shift.</li><li>Requires close visual and hearing observation to detect non-conformance and machine malfunction.</li><li>Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms. </li><li>Works in various positions; works on ladders, catwalks, and supports at heights of 50 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds. </li><li>Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 10 feet. </li><li>Occasional stooping, bending or kneeling and entering confined spaces.</li></ul> Additional Information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Industrial Maintenance Mechanic III - Wastewater Plant

<h4>Overview</h4>LMI is seeking an experienced Electrical Engineer to support a federal program management office (PMO) charged with planning, acquiring, and managing the deployment and operation of technology and capabilities to keep our borders safe.&nbsp; We are seeking an energetic self-starter who is focused on practical and efficient solutions delivered by an interdisciplinary, collaborative team.&nbsp; This individual will support the design and construction of our client’s tactical technology infrastructure projects along the southwest border. The civil engineer will provide support to the client’s program management office, located in Washington, D.C. Travel required.LMI is a consultancy dedicated to powering a future-ready, high-performing government, drawing from expertise in digital and analytic solutions, logistics, and management advisory services. We deliver integrated capabilities that incorporate emerging technologies and are tailored to customers’ unique mission needs, backed by objective research and data analysis. Founded in 1961 to help the Department of Defense resolve complex logistics management challenges, LMI continues to enable growth and transformation, enhance operational readiness and resiliency, and ensure mission success for federal civilian and defense agencies.LMI has been named a 2024 #BestPlacestoWork in the United States by Built In! We are honored to be recognized as a company that values a people-centered culture, and we are grateful to our employees for making this possible!<h4>Responsibilities</h4><ul><li>Support a federal agency’s technical division and act as a subject matter expert for&nbsp;electrical&nbsp;engineering matters</li><li>Utilize subject matter expertise to deliver solutions to engineering requirements for DHS projects to include both new construction and maintenance and repair of existing real property</li><li>Communicate with senior leadership; engineering subject matter experts (SMEs), project managers and facility managers about issues and solutions regarding project requirements</li><li>Perform quality assurance reviews of design documents and engineering studies, and provide associated technical recommendations</li><li>Review project progress from an engineering perspective, measuring performance and proposing necessary corrective actions to maintain agreed-upon requirements</li><li>Travel to project sites at geographically dispersed locations nationwide as required to verify progress of work, ensure conformity with specifications and accepted engineering practices, attend program management reviews and contribute to technical Integrated Project Teams</li><li>Provide engineering inputs to cost estimates; utilize value engineering analysis as needed</li><li>Assist with all aspects of facility development, including planning, programming, design and construction phases</li><li>Provide input on appropriate standards, and guidelines, as well as interpretation and compliance for building code and regulations.</li><li>Collaborate with other BPAM personnel including other architects, engineers, project managers, facility managers, planning and budget staff</li><li>Oversee the execution of engineering projects as needed</li><li>Evaluate backup power requirements including power generations (generator, solar, combinations) as well as evaluating overall requirement</li><li>All positions will have up to 50% travel.</li></ul><h4>Qualifications</h4><ul><li>8+ years of relevant experience and a Bachelor’s degree in&nbsp;electrical&nbsp;engineering.</li><li>A current Professional Engineer (PE) license or Engineer-in Training (EIT) certification preferred.</li><li>Project Management Professional (PMP) certification, Certified Construction Manager (CCM), or other industry-related certification is a plus.</li><li>Proficiency in Microsoft Word, Excel, Outlook, PowerPoint, and SharePoint.</li><li>Ability to read construction documents, including drawings, specifications and RFPs</li><li>Ability to communicate clearly with a variety of stakeholders.</li><li>Ability to effectively solve problems.</li><li>Strong communication skills, both oral and written.</li><li>Available for approximately 20% travel.</li><li>Ability to pass a government background investigation, including financial, criminal, residential, educational, foreign affiliation, prohibited substance abuse, and employment verifications; active U.S. Customs and Border Protection background investigation (CBP BI) preferred. Please note that only U.S. citizens are eligible for a suitability determination.</li></ul><h4> LMI is an Equal Opportunity Employer. LMI is committed to the fair treatment of all and to our policy of providing applicants and employees with equal employment opportunities. LMI recruits, hires, trains, and promotes people without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, disability, age, protected veteran status, citizenship status, genetic information, or any other characteristic protected by applicable federal, state, or local law. If you are a person with a disability needing assistance with the application process, please contact <a href="mailto:accommodations@lmi.org" target="_blank">accommodations@lmi.org</a> Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Need help finding the right job? </h4>We can recommend jobs specifically for you!Click here to get started.

LMI Consulting, LLC

Electrical Engineer Facilities

Company Description Veolia Group is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world's most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description Job Summary: The Mechanical Maintenance Technician Lead works alongside and guides the Maintenance Technicians in their daily routines and duties as needed. At times, they will work independently performing maintenance activities. Along with the Instrument &amp; Controls Lead, this position prioritizes preventative maintenance and other repair activities. This role maintains and leads the shift to the highest standard regarding professional attitude toward work and safety. Ensures that equipment, machinery, general repairs, installation of new equipment/systems and preventative maintenance programs are carried out efficiently and properly. Key Characteristics: • Ability to apply to carry out instructions furnished in written, oral, and diagram form • Ability and willingness to read documents and implement such as safety rules, operating and maintenance instructions, and procedure manuals • Ability to work independently with minimal supervision • Accountable, reliable and thorough • Computer proficient • Leadership traits and skills • Problem solving skills Duties &amp; Responsibilities: • Assists and works alongside the Maintenance Technicians in performing proper diagnosis of any malfunctioning machinery, general repairs, installing new equipment and systems and preventative maintenance programs on all assigned machinery. • Installs or directs the installation of new equipment or rearranges existing equipment • Maintains an inventory of spare parts The job description is not designed to capture all the employee's responsibilities but is intended to capture essential functions of the role. Responsibilities may change over time and may be assigned at any time. • Is available on call for emergency repairs as needed to keep plant in good running order • Leads by example and practices good safety procedures in order to keep self and others injury free. Follows EHS policies and procedures. • Performs and/or directs preventative maintenance on plant facilities and equipment as well as Mobile/Service DI water treatment equipment. • Provides leadership to the Maintenance staff and directs the maintenance operations during the shift. • Other duties as assigned. Knowledge, Skills &amp; Abilities Preferred: • Associate's Degree in electrical, industrial / mechanical, engineering, or water treatment disciplines • Minimum of 3 years of Electrical install, repair, and maintenance work experience to include electronic troubleshooting, PLC programming, and 480V 3 Phase electrical repair and maintenance experience • Trade school experience for electrical, plumbing, carpentry, and/or mechanical repair is highly desired Qualifications Education &amp; Experience Required: • HS Diploma, GED or equivalent. • Minimum of 2 year mechanical repair and maintenance work experience • Minimum of 1 year experience in a shift lead role • Possess a valid driver's license and clean driving record history Preferred (if applicable): • Associate Degree or Trade School Certificate in Mechanical / Industrial Maintenance • 5 year mechanical repair and maintenance work experience • 3 year experience in a lead role Additional Information Working Conditions • Ability and willingness to perform physical duties such as lifting, climbing, working at elevated heights, and manual dexterity • Ability and willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities Around the globe, we help cities and industries manage, optimize and make the most of their resources. We provide an array of solutions related to water, energy and materials to promote a cleaner more sustainable world for all of us. The collective expertise and passion of our people, combined with a broad portfolio of over 10,000 technologies, makes us uniquely positioned to deliver solutions that positively impact the environment. Come be part of something special - start your journey today! What We Offer: • Competitive pay and opportunity for advancement. A place to build a career! • Training in valuable skills • Great benefits including retirement plans • Opportunity for new challenges. We're growing! • Strong leadership team! As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

757 Facilities and Maintenance Jobs