field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

Director - Planning &amp; ConstructionJob ID: 13216Location: El Paso, TXFull/Part Time: Full TimeRegular/Temporary: RegularAbout UTEPUTEP is a comprehensive public research university that is increasing access to excellent higher education. We advance discovery of public value and positively impact the health, culture, education, and economy of the community we serve.The University of Texas at El Paso is America's leading Hispanic-serving university. Located at the westernmost tip of Texas, where three states and two countries converge along the Rio Grande, 84% of our 24,000 students are Hispanic, and more than half are the first in their families to go to college. UTEP offers 172 bachelor's, master's and doctoral degree programs at the only open-access, top-tier research university in America.Position InformationHiring Department: Planning and ConstructionPosting End Date: Open until filled.Hours: 40 hours per week, standard Monday- Friday 8:00am- 5:00pm, flexibility is required on evenings and weekendsFLSA status: ExemptEarliest Start Date: As soon as possible.Salary: Commensurate with education and experience.Required Application Materials:• Resume• Cover Letter• List of three referencesThe primary accountabilities are intended to describe the general content of and requirements of this position and are not intended to be an exhaustive statement of duties. Incumbents may perform all or some of the primary accountabilities listed. Specific tasks or responsibilities will be documented in the incumbents' performance objectives as outlined by the incumbents' immediate supervisor or manager. This position is security-sensitive and subject to Texas Education Code §51.215, which authorizes the employer to obtain criminal history record information. A valid driver's license issued by the State where the applicant resides and insurability as defined in UTS 157 may be required to perform the position's essential functions.Purpose of PositionEssential FunctionsPlans, develops, coordinates, and directs various design and construction projects.Ensures operational efficiency and economy of the department, including development and administration of annual budgets for project design, renovations, and construction projects. Reviews cost factors and estimates and determines cost effectiveness.Monitors project budgets, schedules, and project goals. Reviews, approves, and tracks project expenditures.Plans, directs, and coordinates, through subordinate level staff, the department's work plan and assignment of projects to Project Managers, Construction Managers, administrative staff, and professional service contractors.Monitors workload, administrative systems and evaluates efficiency and effectiveness of delivery methods and procedures and allocates resources accordingly. Meets with key staff to identify and resolve problems.Oversee the work of architects, engineers, inspectors, and other contractors involved in capital projects. Additionally, they create and deliver informational updates and presentations to the Capital Planning Committee and other interested organizations.Responsible for recruitment, staffing, training and development, performance evaluations and employee counseling and termination.Responsible for developing, implementing, and monitoring standards and procedures related to design, energy efficiency, and sustainability goals for facilities planning, as well as capital and renovation projects.Develops and implements short and long-range campus facilities plans, conceptual designs, and capital outlay (budget) requirements.Compiles and submits reports as required by management, state, local, and federal regulatory agencies.Acts as liaison between the planning and construction department, the university leadership, administration, and outside agencies for all project activities from initiation to completion of the project.Participates in various committees, professional training, industry conferences, and conventions.Ensures all construction, remodeling and design comply with applicable building codes and regulations and any special requirements of the building type (e.g., healthcare, research labs, special campus project types, etc.) or the local jurisdictions.Knowledge of all Microsoft Office software and able to learn and use institutional software systems.Complies with all State and University policies and procedures. Ensure compliance with Board of Regents Rules &amp; Regulations, State Statutes, Federal Regulations, state statutes, Federal regulations, and Laws on all projects.Occasional traveling is required.Other duties as assigned.Supervisory Responsibilities: Carries out supervisory responsibilities in accordance with the organization's objectives, policies, and applicable laws.QualificationsTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.Required Qualifications:Education: Bachelor's Degree (B Arch, or M Arch) in Architecture, engineering, construction management or a related field.andExperience: Requires at least 10 years of responsible experience in architecture, engineering, construction management, facilities planning, or related field, including 7 years' experience in management and administration., In addition the candidate should possess substantial years of experience commensurable to the statement of duties and responsibilities; or equivalent combination of education and experience. Experience with Institution of Higher Education desired.Professional Licensure:Professional architectural or engineering in Texas in good standing or related technical licensePreferred Education: Master's degree in related technical or managerial field.Preferred Experience: 15 years' experience with complex project management experience in educational facilities design and construction. Experience with higher education or similar organizations.Preferred Qualifications:Demonstrated ability to work on multiple projects in a fast-paced environment.Excellent customer service, communicating clearly and appropriately to clients, consultants, and stakeholders.Demonstrated ability to read construction documents and provide simple, preliminary estimates.General knowledge of the TX Procurement Code.General knowledge of Federal, State, and Local Building Codes.Demonstrated ability to make administrative and procedural decisions and judgments.Knowledge of sound fiscal management and budgeting practices and principles; proven ability to work independently in analyzing and resolving complex financial problems; experience with higher education or not-for-profit capital budgeting.Additional InformationThe physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee must frequently stand and walk. The employee must regularly sit; use hands to feel; reach with hands and arms; and talk or hear. The employee must lift and move up to 25 pounds.The noise level for this work environment is usually moderate.In keeping with its access, excellence and impact mission, The University of Texas at El Paso is committed to an open, diverse, and inclusive learning and working environment that honors the talents, respects the differences, and nurtures the growth and development of all. We seek to attract faculty and staff who share our commitment.The University of Texas at El Paso is an Equal Opportunity / Affirmative Action Employer. The University does not discriminate on the basis of race, color, national origin, sex, religion, age, disability, genetic information, veteran status, or sexual orientation and gender in employment or the provision of services in accordance with state and federal law. Discrimination on the basis of sex includes an employee's or prospective employee's right to be free from sexual harassment under Title IX of the Higher Education Amendments of 1972.For accommodation information for employees and applicants with disabilities, please contact UTEP's Equal Opportunity Office at <a href="mailto:eoaa@utep.edu.To" target="_blank">mailto:eoaa@utep.edu.To</a> apply, visit <a href="https://apptrkr.com/6207234jeid-8b6411e53155ca49bb8cb109df415812" target="_blank">https://apptrkr.com/6207234jeid-8b6411e53155ca49bb8cb109df415812</a>

The University of Texas at El Paso

Director - Planning & Construction

Company Description Veolia Group is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world's most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description As a Maintenance Technician, you'll be on the front lines providing maintenance expertise on water treatment systems for one of industrial customers in Destrehan, LA. This role involves working on a variety of technologies including clarification, dewatering system, media filtration, reverse osmosis (RO). To be successful in this profession, you'll need to have excellent mechanical, process and electrical know how and problem-solving skills. You will perform proper diagnosis of any malfunctioning machinery, general repairs, installing new equipment and systems and preventative maintenance programs on all assigned machinery as directed by the supervisor. If you like the idea of working in a challenging role doing meaningful work you can feel proud of, here's more... Key Characteristics <ul><li>Conduct maintenance and Install/Replace and/or supervise the replacement of proposed equipment</li><li>Verify installation is as per drawings</li><li>Consult with customer management and operation teams</li></ul><ul><li>Excellent mechanical know how and problem-solving skills</li><li>Operate, monitor, and optimize equipment performance</li><li>Meet with internal and external contributors to communicate schedules and address issues as necessary</li></ul> Duties &amp; Responsibilities <ul><li>Responsible for proper diagnosis of any malfunctioning machinery, general repairs, installs new equipment and systems as directed and maintains preventative maintenance programs on all assigned machinery</li><li>Carry out mechanical, electrical and controls troubleshooting on equipment such as valves, air compressors, ejectors, process pumps, blowers, and instrumentation</li></ul><ul><li>Performs preventative maintenance on plant and road equipment on a regular basis</li><li>Installs new equipment or rearranges existing equipment as directed</li><li>Performs building and ground maintenance as assigned</li><li>Practices good safety procedures in order to keep self and others injury free</li><li>Follows good housekeeping practices by keeping maintenance and tool storage area neat and clean as well as timely cleanup of work area after each job is completed</li><li>Maintains records and reports as directed by immediate supervisor</li><li>Must be available on call for emergency repairs as needed to keep the plant in good running order</li><li>Maintain inventory of spare parts and adequate supply of chemicals and replacement parts</li><li>Monitor and maintain chemical injection systems</li><li>Assists in other departments and performs various duties as required</li></ul> Qualifications Knowledge, Skills &amp; Abilities <ul><li>Demonstrated ability to work independently and remotely with project teams</li><li>Provide customers with informal training around operation and maintenance of their system</li><li>Ability to gain and maintain access to sites as assigned</li><li>Ability and willingness to read documents and implement such as safety rules, operating and maintenance instructions, and procedure manuals</li><li>Ability to perform physical acts such as lifting, climbing, and manual dexterity</li><li>Must be certified within the first 90 days of employment in safe operation of forklift trucks as evidenced on the 90-day evaluation</li></ul> Education &amp; Experience <ul><li>High School Diploma / GED / Home School Certification OR international equivalent 2+ years' experience of service/maintenance or equivalent in an industrial environment (trade school or apprenticeship training in plumbing, carpentry, or mechanical repair is highly desirable)</li><li>Valid Driver's License and clean driving record history</li></ul> Additional Information At Veolia, we realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We're an organization that champions diversity and inclusion at every rung of the ladder and are proud to be an equal opportunity workplace. Because our people are our greatest assets, we also offer competitive benefits that include: <ul><li>Medical, Dental, &amp; Vision Insurance Starting Day 1!</li><li>Life Insurance</li><li>Paid Time Off</li><li>Paid Holidays</li><li>Parental Leave</li><li>401(k) Plan - 3% default contribution plus matching!</li><li>Flexible Spending &amp; Health Saving Accounts</li><li>AD&amp;D Insurance</li><li>Disability Insurance</li><li>Tuition Reimbursement</li></ul> ****Applicants are required to be eligible to lawfully work in the U.S. immediately; employer will not sponsor applicants for U.S. work authorization (e.g. H-1B visa) for this opportunity**** VWTS does not accept unsolicited resumes from external recruiting firms. All vendors must have a current and fully executed MSA on file before submitting candidates. Any unsolicited resumes and candidate profiles will be deemed the property of VWTS, and no fee will be due. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

Field Service Representative (Maintenance Focused)

Commitment to MissionThis job carries with it the obligation to uphold the Mission of Lone Star College (LSC) in carrying out the duties of the position. A commitment to positive interpersonal behaviors, professional communication, integrity, leadership, stewardship, respect and accountability to LSC students and employees is essential.Cultural Beliefs<ul><li>One LSC</li><li>Student Focused</li><li>Own It</li><li>Foster Belonging</li><li>Cultivate Community</li><li>Choose Learning</li></ul>The Chronicle of Higher Education's "Great Colleges to Work For®" is designed to recognize colleges that have been successful in creating great workplaces and to further research and understanding of the factors, dynamics and influences that have the most impact on organizational culture at higher education institutions.Lone Star College has been recognized in multiple categories.Qualities of ExcellenceAs faculty members of Lone Star College, we strive to create a nation of world citizenry in our students. In that pursuit, we model ways of thinking and being that incorporate diversity, equality, and equity. Our culture, then, requires the possession of transcendent qualities that, while immeasurable, are evident in global citizens. We are compassionate with our students, colleagues, and ourselves. We are innovative in the pursuit of learning. Ultimately, we create a culture where learning thrives, people are safe, and we mirror the qualities of world citizenry.Lone Star College faculty are dedicated to four qualities of excellence:<ul><li>Student Invested</li><li>Content Expert</li><li>Pedagogically Excellent</li><li>Institutionally Dedicated</li></ul>Campus Marketing StatementLone Star College-University ParkLone Star College offers high-quality, low-cost academic transfer and career training education to 80,000+ students each semester. LSC has been named a 2023 Great Colleges to Work For® institution by the Chronicle of Higher Education. LSC consists of eight colleges, seven centers, eight Workforce Centers of Excellence and Lone Star Corporate College.Established in 2012, Lone Star College-University Park has been recognized nationally and internationally for its innovation, as well as its focus on student access and success. Conveniently located off SH 249 in the heart of northwest Houston, Lone Star College-University Park is known as the "community's college," providing students with highly affordable degree and certificate programs that transfer seamlessly to four-year universities or lead to direct employment. Campus facilities include the Center for Science &amp; Innovation, the Energy &amp; Manufacturing Institute, Learning Innovation Labs and the Geology Rock Wall. Location address is 20515 SH 249 (TX 249 and Louetta Road), Houston, TX 77070.Job DescriptionPURPOSE AND SCOPE:It is the responsibility of the teaching faculty to provide the learning activities and support that will lead to the achievement of the course objectives and contribute to the educational environment of the college and the community. Primary responsibilities are to plan, develop and teach courses within the curriculum in a manner that facilitates student learning.Adjunct faculty are hired in a part-time capacity on a semester-by-semester basis, contingent upon the needs of the System. Lone Star College accepts application material year-round from qualified applicants willing to teach on a part-time basis. Adjunct (part-time) faculty hiring is based on student demand. We offer day, evening, and weekend classes. Classes are offered at various times and locations during the academic year. As a rule, adjunct faculty may teach a maximum of five classes per academic year.ESSENTIAL JOB FUNCTIONS:<ul><li>Teaches Energy, Manufacturing &amp; Trades Management courses at a variety of times and locations</li><li>Creates engaging lessons that promote student involvement and application of the material.</li><li>Submits required college reports and forms in a timely manner</li><li>Utilizes a course syllabus for each course, following established institutional guidelines</li><li>Meets with and advises students either before or after class or by appointment, electronic communication, or other appropriate methods</li><li>Evaluates students to measure their progress in achieving course objectives and informs students in a timely manner of their progress</li><li>Maintains professional relationships with students, colleagues, and the community</li><li>Attends meetings, trainings, and orientations as required</li><li>Responsible for other reasonable, related duties as assigned</li></ul>KNOWLEDGE, SKILLS, AND ABILITIES:<ul><li>Mastery of course content</li><li>Demonstrated leadership skills; Style that emphasizes collaboration, teamwork, and facilitation</li><li>Excellent oral and written communication skills and interpersonal skills</li><li>Ability to appreciate alternative viewpoints; Ability to work effectively with a wide variety of people</li><li>Demonstrates interest in interdisciplinary teaching, service learning, learning technologies, course development, and adult learning methodologies including collaborative learning, learning communities and distance learning</li><li>Commitment to academic excellence, exceptional service and providing a dynamic climate for life-long learning</li><li>Demonstrated ability to develop and implement instructional approaches such as service learning/civic engagement, learning communities, and the effective use of technology</li><li>Ability to use effective strategies to engage students in their learning</li></ul>PHYSICAL ABILITIES:The work is sedentary. Typically, the employee sits comfortably to do the work. However, there may be some walking; standing; bending; carrying of light items, such as papers, books, or small parts; or driving an automobile. No special physical demands are required to perform the work.WORK SCHEDULE AND CONDITIONS: <ul><li>Equipment used includes, PC workstation running on a LAN in a Microsoft Windows environment, calculator, phone and other general office equipment, and any specialized equipment standard within the discipline/industry</li><li>Interface with internal and external contacts as needed to carry out the functions of the position</li><li>Computer Equipment utilized in simulation</li><li>All types of equipment utilized in simulation as well as that controlling the chemical plant will be used.</li><li>Work is performed in a climate-controlled classroom and/or lab environment with minimal exposure to safety hazards</li><li>There is required time outside in the environment. Both with students and during maintenance. These times may be during all seasons and all times of the day and night</li><li>Hours will vary depending on class time; Instructors are required to meet with classes at all scheduled times and be available to students outside of class instruction</li><li>EMTM work requires that health and safety precautions are followed at all times</li></ul>REQUIRED QUALIFICATIONS:<ul><li>Master's in management, business management, computer/ management information systems, leadership or related field and at least (3) years of work experience in the field or teaching in the field at the post-secondary level</li></ul>PREFERRED QUALIFICATIONS:<ul><li>Doctorate in related field</li><li>Higher education teaching experience in the field of Business, Business Management, Management Information Systems, Leadership, Process Technology or related field</li></ul>Salary$58.05 per contact hour.Benefits Marketing StatementBy joining our top-notch institution, you will enjoy being a part of an organization that offers a supportive, collegial work environment, excellent work/life balance, tuition waiver, participation in a tax deferred retirement plan, professional development opportunities and more.Special InstructionsGo to the Job Search page, click on ‘My Activities’ at the top of the page. Under My Cover Letters and Attachments you will click on ‘Add Attachment.’ Please be sure to put the Job ID# in the title once you name your file for cover letters only, unless you attached your cover letter with your resume.If you are applying for an Instructional position (i.e. Faculty, Adjunct Faculty, Instructor), please ensure you include the following to be considered: Resume/CV, Cover Letter, Teaching Philosophy, and unofficial transcripts. You must limit your file name for any attachment to 40 characters or less.How to ApplyALL APPLICANTS MUST APPLY ONLINE ONLYWe will not accept application material received via fax, email, mail, or hand delivered.Postings for part-time and adjunct positions are active for the academic year. By selecting the option to receive notifications on your profile, you will begin receiving electronic communication regarding new opportunities with Lone Star College (LSC).If selected for an interview, a recruiter will contact you by phone, or email to schedule an interview.Lone Star College participates in the E-Verify program, under which Lone Star College provides the federal government with information from each new employee's Form I-9 to confirm that the employee is authorized to work in the United States.More information on the E-Verify program is available at <a href="http://www.dhs.gov/E-Verify" target="_blank">www.dhs.gov/E-Verify</a>.Lone Star College is an EEO Employer. All positions are subject to a criminal background check.

Adjunct Faculty, Energy, Manufacturing, & Trades Management

<h4>Service (Maintenance) Supervisor</h4>Dylan at RiNo - Denver, COWork Schedule: Monday - Friday 8:00AM - 5:00PMWhat's in it for you?The base hourly rate for this position is expected to start at $32.00 - $40.00/hour, with the actual base amount dependent on a number of factors, including but not limited to a candidate's credentials, relevant experience, and primary job location, with consideration given to internal equity.&nbsp;This position is eligible for:<ul><li>On call pay and Quarterly Renewal Bonuses</li><li>Competitive PTO</li><li>Generous time off - 10 paid holidays, plus diversity day and your birthday</li><li>Paid Caregiver and Paid Parental Leave</li><li>20% Rent, Parking, and Storage Discount for Centerspace rents</li><li>32 Paid Hours of Volunteer Time Off</li><li>Medical/Dental/Vision Benefits – 1st of Month Following Start Date</li><li>Centerspace Stock Purchase Plan</li><li>401(k) match up to 5% per paycheck</li><li>Tuition Reimbursement &amp; Scholarship Program</li></ul>About Centerspace:&nbsp;Centerspace&nbsp;was founded in Minot, North Dakota, in 1970. You can find our corporate support offices located in Minneapolis, Minnesota and in Minot, North Dakota, along with onsite operations in six states. From Denver, CO to Minneapolis, MN, our company continues to grow throughout the Midwest, proudly providing apartment homes to thousands of residents, extending our vision to be the premier provider of apartment homes in vibrant communities by focusing on integrity and serving others.&nbsp; Centerspace&nbsp;is built around our employees.&nbsp; Our Mission and Vision unites our employees as one team.SummaryResponsible for the efficient administration of maintenance services and positive customer services for the Centerspace portfolio within the assigned region by performing the following duties personally or through maintenance staff&nbsp;&nbsp;Expectations Requires no supervision, able to self-direct and self-motivate completely.&nbsp; Prioritizes and sets deadlines.&nbsp; Assists others in prioritizing, setting deadlines, etc.&nbsp; Requires a high level of initiative, innovation and understanding of the big picture.&nbsp; Directs the work of others.&nbsp;&nbsp; Expected to be a mentor and resource to other maintenance staff.Essential Duties &amp; Responsibilities&nbsp;include the following. &nbsp;Other duties may be assigned. To perform the job successfully, an individual must be able to perform each essential duty satisfactorily.&nbsp; The requirements listed below are representative of the knowledge, skill, and/or ability required.&nbsp; Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.Maintenance:<ul><li>Conducts property inspections and determines preventative maintenance requirements based on equipment and structural needs.</li><li>Complete minor and major repairs of mechanical or aesthetic issues to ensure the property is optimally functional, presentable, and safe.</li><li>Perform minor and major HVAC maintenance, such as replacing motors and bearings.</li><li>Change light bulbs, service flush valves, clean mechanical rooms, and plunge toilets.</li><li>Paint assigned areas and perform minor repairs to applicable areas.</li><li>Perform carpet repairs.</li><li>Demonstrate proficiency and respond appropriately to the building automation and security (including card access if applicable), fire, life, and safety systems.</li><li>Perform general building preventative maintenance to ensure equipment is safe and effective for use, and down time with equipment meets or exceeds established specifications.</li><li>Service and monitor the HVAC equipment.</li><li>Maintain the environmental conditions of spaces to ensure the tenant and common space environments are acceptable for optimum use.</li><li>Perform preventative maintenance on:<ul><li>HVAC</li><li>Electrical</li><li>Plumbing</li><li>Lighting</li><li>Doors, locks, and hardware</li><li>Wall treatments</li></ul></li><li>Provide assistance to the Community Manager and/or Regional Manager to ensure that tenant improvements are accurate and address concerns with appropriate contact, such as construction or tenant.</li><li>Monitor and maintain tools.</li><li>Perform assigned duties as prescribed in safety manuals.</li><li>Respond to test situations accurately.</li><li>Maintain sufficient technical and industry contacts and knowledge.</li><li>Participate in after hours on-call programs.</li><li>Assist outside contractors with major inspections.</li><li>Serve as a key contact between the Regional Manager, Community Managers, and tenants.</li><li>Apply current knowledge or devise creative solutions to proactively resolve issues.</li><li>Utilize any tools and/or processes implemented by the organization to assure adherence to quality standards.</li><li>Participate in capital improvements.</li><li>Completes pre-moveout and moveout inspections.</li><li>Responsible for scheduling apartment turnovers in advance to achieve completion within five days of moveout (average).</li></ul>Administrative:<ul><li>Maintain operating logs and record temperatures, pressures, and chemical level of heavy equipment such as chillers and boilers.</li><li>Complete reports and perform various administrative duties to positively support completion of activities and projects.</li><li>Maintain accurate levels of inventory related to the building’s mechanical systems to ensure optimum levels of inventory are on hand and readily accessible when needed.</li><li>Purchase parts and supplies from vendors; review pricing for competitive rates for parts, services, and supplies.</li><li>Stock items when received.</li></ul>Cleaning:<ul><li>Clean up vacant areas.</li><li>Remove debris from the building and grounds.</li><li>Provide backup for Community Porter.</li></ul>Emergency Situations:<ul><li>Know and perform individual emergency procedures and duties as dictated by the site emergency procedure manual and the safety manual to ensure that actions promote the safety and security of the employees, occupants, and structures, and correct actions are demonstrated in test situations and actual emergencies.</li><li>Promptly respond to all emergency situations, fire alarms, and natural catastrophes.</li><li>Study and know the site-specific emergency manual(s).</li><li>Assist tenant and emergency personnel in swift and careful evacuations when appropriate.</li></ul>Other:<ul><li>Communicate and interact with property management and engineering staff for day-to-day operational issues.</li><li>Communicates regularly with vendors, equipment repair, maintenance, and tenants for day-to-day operational issues.</li><li>Analyze strengths and weaknesses of current products and services.</li><li>Brainstorm and research improvements and/or new products and services.</li><li>Participate in continuous improvement/quality initiatives and identify improvements to, and/or develop new, products, services, or processes to result in the discovery of more efficient and effective methods and/or new offerings.</li><li>Participate in cross-functional and interdepartmental meetings/teams.</li><li>Serve as a resource and collaborate with both internal and external customers by obtaining and sharing knowledge and information and coordinating actions and decisions with other departments in order to enhance individual and customer abilities to achieve quality results.</li><li>May be responsible for snow removal such as driving the plow or bobcat or shoveling snow and de-icing walkways, etc, depending on the property and need.</li><li>Assist and/or back up coworkers.</li></ul>Administrative: <ul><li>Complete reports and perform various administrative duties to positively support completion of activities and projects.</li><li>Maintain accurate levels of inventory related to the building’s mechanical systems to ensure optimum levels of inventory are on hand and readily accessible when needed.</li><li>Purchase parts and supplies from vendors; review pricing for competitive rates for parts, services, and supplies.</li><li>Stock items when received.</li><li>May participate in the budgetary process as requested by the Regional Manager.</li><li>May participate in employee discipline as requested by the Regional Manager.</li></ul>Leadership: This job has no direct supervisory responsibilities.&nbsp; Employee may delegate duties, train new employees, and serve as a mentor and resource for other maintenance staff, but will work in conjunction with the Community Manager or Regional Property Manager when appraising performance, disciplining employees, making hiring or firing decisions, or approving time worked.<ul><li>Oversees and directs the daily activities of maintenance staff, supportive services and vendors.&nbsp;</li><li>Together with Community Manager and/or Regional Manager,&nbsp;provides input regarding hiring, terminating, and supervising&nbsp;maintenance and custodial personnel.</li><li>Coordinates with Training Manager&nbsp;to formulate training policies, programs, and schedules, based on knowledge of identified training needs, company production processes, business systems, or changes in products, procedures, or services.</li><li>Recommends&nbsp;employees for participation in internal or external education and training programs.</li><li>Maintains records&nbsp;and prepares statistical reports to evaluate performance of maintenance personnel’s time and spending. Assist Training Manager in maintaining mandatory training records and licensing for maintenance and custodial staff.</li><li>Trains&nbsp;new maintenance and custodial staff of quality requirements and company policies and procedures.</li></ul>Equipment Issued If expected to carry a mobile phone, eligible for a monthly reimbursement or Centerspace issued phone, according to company policy.&nbsp; May have access to a shared company vehicle.&nbsp; Eligible for mileage reimbursement, according to company policy, when no Centerspace owned vehicle is available.Travel Required Some local travel may be required.Education &amp; ExperienceRequired:<ul><li>5+ years’ maintenance experience.</li><li>Demonstrated leadership capabilities.</li><li>Ability to prioritize tasks to ensure goals and time frames are met.</li><li>Exceptional customer-service skills; demonstrated ability to maintain strong working relations with both internal and external clients.</li><li>Demonstrated ability to manage multiple and complex operational matters on a daily basis.&nbsp;</li></ul>Preferred:<ul><li>Trade school education.</li><li>EPA, CPO and/or boilers operator’s license.</li><li>HVAC, electrical and plumbing certifications or licenses.</li></ul>Certifications and/or Licenses:&nbsp; Have or willing to attain EPA, CPO, and/or boiler operator’s license as required.Knowledge, Skills, &amp; Abilities<ul><li>Language Skills –&nbsp;Ability to read and interpret documents such as safety rules, operating and maintenance instructions, MSDS sheets, and procedural manuals. Ability to communicate effectively with supervisor, tenants and vendors.</li><li>Mathematical Skills –&nbsp;Ability to add, subtract, multiply and divide. Calculate figures and amounts such as proportions, percentages, area, ratios, circumference, and volume.</li><li>Reasoning Ability –&nbsp;Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.</li><li>Computer Skills –&nbsp;To perform this job successfully, an individual must be able to efficiently use and navigate on the internet and use web based timekeeping software. Experience with work order systems beneficial.</li></ul>Physical RequirementsWhile performing the duties of this job, the employee is required:<ul><li>Constantly (66-100% of the time)&nbsp;- to be on feet, stand, walk; bend, stoop, squat, kneel; use hands and fingers to grasp, grip, turn and feel; reach above shoulders, push, pull, lift and carry; operate equipment and tools; climb stairs and ladders; balance; and talk and hear or effectively and safely communicate. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Lift or move up to 25 pounds.</li><li>Frequently (33-66% of the time) -&nbsp;lift and/or move up to 75 pounds, write reports and drive vehicles.</li><li>Occasionally (1-33% of the time) -&nbsp;sit; lift and/or move more than 75 pounds, although usually with the assistance of another employee and/or equipment.</li></ul>To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required.&nbsp; Additional details regarding competencies and other duties are available upon request.&nbsp; Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of this position.“Centerspace is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind:&nbsp;Centerspace is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment.&nbsp;All employment decisions at Centerspace are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, family or parental status, or any other status protected by the laws or regulations in the locations where we operate.&nbsp;Centerspace will not tolerate discrimination or harassment based on any of these characteristics.&nbsp;Centerspace encourages applicants of all ages.”

Centerspace

Service (Maintenance) Supervisor

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!SPACE SYSTEMSRocket Lab’s Space Systems team is responsible for every satellite and satellite component made by Rocket Lab: from complete satellites destined for missions to the Moon and Mars, to the individual components and subsystems that make up a satellite like solar panels, flight software, reaction wheels and star trackers, separation systems, radios, and more. Our Space Systems team is made up of engineers, technicians, and designers who design, create, and put together our own satellites for missions across the commercial, government, and defense sectors, or who build and assemble satellite hardware and software that supports other satellite missions.TECHNICIAN I-IV, OPS SUPPORT – FACILITIES Based at Rocket Lab's site in Albuquerque, New Mexico theOps. Support Technician - Facilities is responsible for facilities maintenance and ERT team support. You will support the Facilities Manager and operations organization, with deliverables required for internal leadership, board of directors, and investors.(Please note: this position can be hired at the Ops. Support Technician I, Ops. Support Technician II, Ops. Support Technician III or Ops Support Technician IV level)&nbsp;WHAT YOU’LL GET TO DO:<ul><li>Troubleshooting and repair of all facility/HVAC equipment and systems.</li><li>Monitors and assures that environmental standards for clean room operation are being kept.&nbsp;</li><li>Performs facilities and process equipment operational and preventive maintenance procedures.</li><li>Works with engineers to resolve issues or plan for acquiring/installing new equipment or systems.</li><li>Install new facilities and process equipment.</li><li>Assumes leadership role in training and support of new technicians.</li><li>Monitors facility/HVAC systems and suggests modifications for improvement.</li><li>Maintain facility data collection requirements and procedures.</li><li>Identifies nonconformance when they occur and participates in finding the solution to the nonconformance.</li><li>Deploys the Quality Management System as it applies to the scope of work.</li><li>Serve as member of Emergency Response Team.</li></ul>YOU’LL BRING THESE QUALIFICATIONS AS A TECHNICIAN I, OPS SUPPORT:<ul><li>2+ years of experience in a highly regulated manufacturing/production environment.</li><li>Experience in the maintenance and repair of Industrial and commercial HVAC, electrical, mechanical and building support equipment</li><li>Experience using a respirator</li><li>High School Diploma</li></ul>YOU’LL BRING THESE QUALIFICATIONS AS A TECHNICIAN II, OPS SUPPORT:<ul><li>5+ years of experience in a highly regulated manufacturing/production environment.</li><li>Experience in the maintenance and repair of Industrial and commercial HVAC, electrical, mechanical and building support equipment</li><li>Experience using a respirator</li><li>High School Diploma</li></ul>YOU’LL BRING THESE QUALIFICATIONS AS A TECHNICIAN III, OPS SUPPORT:<ul><li>8+ years of experience in a highly regulated manufacturing/production environment.</li><li>Experience in the maintenance and repair of Industrial and commercial HVAC, electrical, mechanical and building support equipment</li><li>Experience using a respirator</li><li>High School Diploma</li></ul>YOU’LL BRING THESE QUALIFICATIONS AS A TECHNICIAN IV, OPS SUPPORT:<ul><li>12+ years of experience in a highly regulated manufacturing/production environment.</li><li>Experience in the maintenance and repair of Industrial and commercial HVAC, electrical, mechanical and building support equipment required.</li><li>Experience using a respirator</li><li>High School Diploma</li></ul>THESE QUALIFICATIONS/SKILLS WOULD BE NICE TO HAVE:<ul><li>Associate's degree in a related field of study</li><li>Building automation system experience</li><li>Plumbing, pipe fitting and irrigation experience</li><li>Low and/or high voltage electrical experience</li><li>Forklift experience</li><li>Osha and/or safety training</li><li>Working knowledge of HVAC systems maintenance.</li><li>Must be able to follow verbal and written instructions including drawing and print interpretation and application.</li><li>Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form.</li><li>Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.</li><li>Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference and volume. Ability to apply concepts of basic algebra and geometry.</li><li>Ability to deal with problems involving several concrete variables in standardized situations.</li><li>Previous Clean Room work environment</li><li>Understanding of mechanical, electro-pneumatics, digital and analogue electronics, and working knowledge of Automated Building Controls</li><li>Familiar with motor controls, compressed air and gas systems, and gas control systems</li><li>Familiarity with CCTV, fire and security alarm systems</li></ul>ADDITIONAL REQUIREMENTS:<ul><li>Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position</li><li>Able to lift up to 25lbs. unassisted</li><li>Must be able to climb ladders and be comfortable working in tight spaces.</li><li>Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls.</li><li>Must be able to walk or stand for extended periods – 8 hours min&nbsp;</li><li>Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces&nbsp;</li></ul>#RL1WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Rocket Lab

Technician I-IV, Ops Support - Facilities

Job Description:The Adjunct – Carpentry position provides quality instruction and maintains a positive learning environment in the classroom, with major emphasis placed on teaching, supporting and evaluating students. The Adjunct role provides instruction and monitors teaching/learning effectiveness in courses assigned by the Department Chair, or other leadership members. The adjunct must exhibit strong organizational skills and the ability to multitask while engaging large groups of people with complicated material.ESSENTIAL JOB FUNCTIONS Instruction &amp; Student Learning <ul><li>Teaches assigned courses as scheduled and assumes primary responsibility for and exercises oversight of the curriculum in conjunction with department policies, ensuring both the rigor of programs and the quality of instruction. Designs curriculum embracing diversity in all forms to foster talent in students while modeling inclusive teaching strategies, with an understanding of the socio-cultural issues of traditionally underrepresented groups. Considers individual differences of students in order to design and support a range of appropriate learning activities. Participates in the identification of students with academic or other needs and responds by utilizing an appropriate resource. Uses technology in a manner appropriate to the nature and objectives of courses and programs and communicates clearly to students the expectations concerning the use of such technology. Keeps accurate and appropriate records in accordance with departmental policies.</li><li>Maintains attendance records, determines and submits grades timely, and in accordance with established policies and procedures of the College, and communicates progress feedback as well as other relevant information to students throughout the semester. Distributes and maintain accurate syllabi that incorporates departmental, college, cross-college, and instructor requirements. Conducts classes punctually and in accordance with the prescribed meeting schedule. Employs appropriate assessment techniques to measure students’ performance in achieving course goals and objectives. Engages in periodic meetings with the department, Lead Instructor, and Chairperson relative to teaching duties and professional development.</li></ul>Student Engagement &amp; Advisement<ul><li>Creates a positive classroom atmosphere that encourages active and collaborative learning, student effort, academic challenge, student and faculty interaction, and support for learners. Maintains posted office hours in accordance with departmental and policies of the College. Uses technology to assist in communication with students. Encourages a sense of community among students for learning both inside and outside the classroom.</li><li>Advises potential or current students within the discipline about the program, career, or transfer options available to assist with degree completion. Refers students to appropriate student and academic support services available at the College or in the community.</li></ul>Culture of Respect <ul><li>Fosters and maintains a safe environment of respect and inclusion for faculty, staff, students, and members of the community.</li></ul>*Regular, predictable, and punctual attendance is required.OTHER DUTIES &amp; RESPONSIBILITIES <ul><li>Attend department meetings and required trainings, as requested</li></ul>MINIMUM EDUCATION AND EXPERIENCE REQUIRED <ul><li>Completion of a Registered Apprenticeship Program specific to the carpentry trade; OR Five (5) years industry experience at Journey Level. Knowledge of residential/light commercial carpentry code preferred.</li><li>State Motor Vehicle Operator's License or demonstrable ability to gain access to work site(s).</li><li>*An appropriate combination of education, training, coursework, and experience may qualify a candidate.</li></ul>KNOWLEDGE, SKILLS, &amp; ABILITIES Knowledge of: construction, repair, and service practices related to residential/light commercial systems; data analysis and application to operational business decisions; online instruction techniques and methods; Microsoft Office; Blackboard; internet research; online communication and record-keeping. Skill in: providing quality instruction; learning technologies and the use multi-media technology to enhance student learning; instructional planning and presentation; incorporating critical thinking, effective communication and other general education outcomes in course content; effective time management; proficiency with online communication record-keeping. Ability to: effectively communicate and use interpersonal skills; create engaging learning environments that respect a wide variety of viewpoints; be sensitive to the needs and concerns of a diverse student population, socio-economic, cultural and ethnic backgrounds and students with disabilities; work independently without ongoing direct supervision; meet deadlines; perform student learning outcomes; maintain confidential and sensitive information, including FERPA. PHYSICAL REQUIREMENT <ul><li>Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions described in this position description. While performing duties of this job, the employee regularly exhibits digital dexterity when entering data into computer. The employee frequently sits for periods of time, stands, and walks. Employee converses verbally or manually with others in person as well as by telephone. Vision demands include close, relatively detailed vision when focusing on a computer screen. Employee occasionally lifts up to 10 pounds. </li></ul>WORKING CONDITIONS <ul><li>Typical office and classroom/lab environment. </li></ul>CSCC has the right to revise this position description at any time. This position description does not represent in any way a contract of employment. Compensation Details: Compensation: $55.88 per contact hourContact Hour: Two hours equals one contact hourHours: Maximum of 12 contact hours per weekFull Time/Part Time:Part time

COLUMBUS STATE COMMUNITY COLLEGE

Adjunct – Carpentry (Skilled Trades)

Sprague is passionate about delivering diverse products and programs that warm, power and move the world. We keep homes warm through Northeastern winters and hospitals cool through summer. We help small businesses focus on serving their communities, and our renewable fuels keep our country’s infrastructure running. From importing wind energy components to deploying leading-edge solar technology to help power terminal facilities, we are committed to continually evolving to meet our customers’ changing energy needs.Are you ready to join a dynamic team and contribute to the energy solutions of tomorrow? We are currently seeking an experienced Service Technician with a minimum of five years’ experience servicing and maintaining heating equipment. &nbsp;As part of our team, you will be responsible for troubleshooting, diagnosing, repairing, and servicing gas and oil burner equipment, controls, piping and wiring at our customer locations throughout the New York Metropolitan area.Experience/Qualifications:<ul><li>Proficient in servicing, repairing, maintaining, and troubleshooting #2 and #4 oil burners.</li><li>Demonstrated expertise in commercial and industrial heating installations.</li><li>Skilled in starting up, diagnosing, and rectifying all equipment defects.</li><li>Proficient in reading and comprehending wiring diagrams.</li><li>Capable of adjusting and fine-tuning equipment for optimal efficiency.</li><li>Possess excellent communication and interpersonal skills.</li><li>Hold a valid and clean driver’s license, adept at navigating the New York Metropolitan area.</li><li>Willing and able to obtain a TWIC (Transportation Worker Identification Card).</li><li>Flexible for overtime and weekend work as required.</li><li>High School Diploma or GED.</li></ul>Benefits:<ul><li>Competitive pay</li><li>Local 32BJ union (retirement plan and Anthem health insurance)</li><li>Life insurance, PTO,</li><li>Assigned take home van.</li></ul>&nbsp;&nbsp;Physical activity/strength requirements are demanding and may include:<ul><li>Frequent standing, walking, and squatting</li><li>Occasional bending, stooping, climbing (stairs, ladders, slopes), crawling, kneeling, sitting, twisting, and balancing</li><li>Frequent lifting/carrying up to 50 lbs., occasional lifting/carrying over 100 lbs.</li><li>Occasional pushing/pulling over 100 lbs.</li></ul>Come join us to learn why we are consistently celebrating 20-, 30-, and even 40-year anniversaries here at Sprague!&nbsp;The rate for this position is $34.00 to $47.80 per hour, based on experience.Sprague is an EEO/AA employer.&nbsp; We strongly encourage minorities, females, Vets and individuals with disabilities to apply.As a federal contractor we adhere to OFCCP employment regulations.Click here for OFCCP compliance information

Sprague

Sprague Resources GP LLC

Service Technician

Company Description About Veolia North America A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description BENEFITS Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Position Purpose: Provides day-to-day monitoring and basic plant and pump/booster station operations, routine lab tests and basic corrective and preventative maintenance activities. Primary Duties/Responsibilities: <ul><li>Operates equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures. Monitors and observes operating conditions, records observations and data in shift log. Diagnoses basic operational problems and takes corrective action per procedure.</li><li>Performs routine CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment which may include pumps, engines, centrifuges, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed, odor control, disinfection equipment, vacuum filters and belt presses. Reports and documents results of work performed and enters into appropriate database. Promptly reports any operational problems with machines or equipment to Lead or Supervisor.</li><li>Collects water, wastewater, industrial waste, groundwater, sludge, residuals and/or gas samples according to schedule. Performs field tests (chemical, physical and biological) in order to pace chemical dosages for process and odor control units. Prepares chemical solutions, monitors supplies and recommends reorder.</li><li>Performs routine lab tests and prepares reports per procedure.</li><li>Performs routine instrument calibration for portable meters including, but not limited to, dissolved oxygen, pH, H2S, percent oxygen, lower explosive limit. </li><li>Learns to inspect and becomes proficient at mechanical troubleshooting to determine repairs needed. Dismantles equipment to gain access to and repairs defective parts using hand tools, power tools and precision measuring and testing devices. Re-assembles and tests equipment ensuring safe and efficient operating condition is restored. Learns to troubleshoot hydraulic, pneumatic and electronic equipment and instrumentation.</li><li>Performs manual labor including cleaning equipment, facilities and grounds as required and properly disposes of waste according to safety and environmental policies. Operates vehicles, mobile equipment and material handling equipment for operational and maintenance purposes.</li><li>Performs facility maintenance and repair and may replace or install light bulbs, fluorescent tubes, damaged glass, windows, doors, partitions, ceiling or floor tiles, door locks, carpet, and/or paint.</li><li>Learns to estimate time and material costs for various projects. May assist in other areas of facility as directed. </li></ul> Work Environment: <ul><li>Spends 100% of the time in operations environment. </li><li>Typically spends 25 - 35% of time exposed to outdoor and sometimes inclement weather. </li><li>Company service vehicles are used as required.</li><li>Travels 1 - 2 times per year for company provided training. </li><li>May be required to travel up to five consecutive days. </li><li>May serve rotational 24-hour emergency on-call.</li><li> Possible Work Hazards : May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards.</li></ul> Qualifications Education/Experience/Background: <ul><li>High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions.</li><li>Six months to two years of experience in a related position with experience in a similar environment preferred with ability to comprehend specifications, blueprints and manuals.</li><li>Experience using material handling equipment, pressure gauges and precision measuring instruments.</li><li>Experience using power, pneumatic, hydraulic and hand tools and shop tools such as drill press, band saw, bench grinder, torque wrench preferred.</li></ul> Knowledge/Skills/Abilities: <ul><li>Ability to perform basic mathematical calculations.</li><li>Some vocational training and mechanical aptitude preferred, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment.</li><li>Must have the ability to diagnose basic and routine process and mechanical problems and take remedial corrective action. </li><li>Must have basic computer skills and have ability to operate programs for process control, the Computer Maintenance Management System, and laboratory/industrial pretreatment QA/QC.</li><li>Must consistently demonstrate the ability to learn and independently perform assigned duties and meet or exceed production and quality goals.</li><li>Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily.</li><li>Must be able to serve rotational 24-hour emergency on-call if required by site.</li></ul> Required Certification/Licenses/Training: <ul><li>Minimum water/wastewater license as required by regulatory agency at site.</li><li>Must possess a valid driver's license and a safe driving record.</li><li>Employee Orientation, Departmental Operating Procedures, Safety, OSHA and Quality Training.</li><li>HAZWOPER (Hazardous Waste Operations and Emergency Response) Level I and II First Responder Certification if required by site. Obtain and maintain minimum water / wastewater operator state certification.</li><li>Must become proficient in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, gas detectors, confined space equipment, etc.)</li><li>Forklift Certification if required by site.</li><li>Training in operation of mechanical drives, hydraulic pumps and valves, pneumatics, electronics and control systems. </li><li>Obtain HVAC, Electrician, Plumber's or other trade License if assigned to that area. </li><li> Note : Tech will not perform duties unless properly licensed.</li><li>Training in the use of energy management systems as needed.</li><li>Works toward increasing skills in additional functional areas or in obtaining advanced skills / maintenance certifications. </li><li>May perform more advanced functions as part of training and development.</li></ul> Physical Requirements: <ul><li>Amount of time spent - Standing 25%, Walking 75% for as many as five miles per shift.</li><li>Requires close visual and hearing observation to detect non-conformance and machine malfunction.</li><li>Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms. </li><li>Works in various positions; works on ladders, catwalks, and supports at heights of 50 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds. </li><li>Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 10 feet. </li><li>Occasional stooping, bending or kneeling and entering confined spaces.</li></ul> Additional Information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Plant Maintenance & Operations Tech. I

<h4>MICHELIN RACEWAY ROAD ATLANTA</h4>Recognized as one of the world’s best road courses, Michelin Raceway Road Atlanta is a 2.54-mile road course situated in the rolling hills 35 minutes north of Atlanta. The multi-purpose facility hosts the 10-hour Petit Le Mans race that closes out the IMSA schedule and is the final of the four endurance races contested by the series. The track prides itself on a family-friendly atmosphere, with a “Kids 12 &amp; Under Are Always Free” policy.SummaryResponsible for all general building and facility maintenance and upkeep; ensure all facilities are maintained at the highest standard level to provide safe environment for staff, visitors, and the public by performing the following duties.Essential Duties and Responsibilities include the following. Other duties may be assigned.Perform general cleaning, garbage removal/disposal, from restrooms and common areas.Perform general grounds keeping, sweeping, mowing and trimming grass using hand, power or riding mower, trims and edges around common areas, walkways, walls, etc.Performs general manual labor tasks including loading, unloading, lifting, and moving materials.Perform basic and general repair and maintenance on track equipment utilized in grounds keeping (mowers, hand tools, etc.)Perform basic and general repair and maintenance of buildings, facilities and /or equipment as needed.Operate forklift, front loader, or other equipment and/or vehicles, both on and off track and in common areas.Maintain a safe working area.No travel required.QualificationsTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Education and/or ExperienceHigh school diploma or general education degree (GED); or 1-3 years related experience and/or training; or equivalent combination of education and experience.Language SkillsAbility to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.Mathematical SkillsAbility to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.Reasoning AbilityAbility to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.Computer SkillsBasic computer skills.Other Skills and AbilitiesUse of common hand tools to perform basic repair and maintenance on buildings, facilities, and/or equipment. Ability to plan, organize and coordinate multiple projects. Effective time management, organization and multi-tasking skills.Other QualificationsMust be available to work some evenings and/or weekends.Position is safety sensitive and participates in the corporate Substance Abuse Program (SAP).This position drives company owned vehicles, including equipment, golf carts and other company-owned vehicles. Must pass driving record issued by Risk Management.Physical DemandsThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel. The employee is frequently required to stand; walk; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.Apply Now!Learn more about this role and our team by applying at <a href="http://www.careers.nascar.com" target="_blank">www.careers.nascar.com</a> for consideration.We are a company unlike any other. We want you to bring your experience, skills and passion to our close-knit, high-energy environment in which our employees thrive and where you can prosper. We know the key to our success is our employees and we offer highly competitive salaries, a solid benefits package focused on wellness, and opportunities for you to grow and develop both personally and professionally. It won’t take you long to find out that you are on the right track here at NASCAR!NASCAR is committed to fostering a diverse work environment where all employees feel valued and empowered. NASCAR is an Equal Opportunity Employer (EEO). We seek to attract and retain the best qualified people available. All qualified applicants will receive consideration for employment without regard to race, color, gender, gender identity and expression, age, national origin, disability, religion, sexual orientation, genetic information, pregnancy, veteran status or any basis that is protected by applicable law except where a bona fide occupational qualification exists.Follow us on Twitter @NASCARJobs to stay current on all of our openings.

NASCAR

General Maintenance Laborer (Part-time)

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.CompensationThe base hourly rate for this position is $32.02.Position Overview:Day shiftThis position is responsible for communicating and supporting JM core values and delivering the JM experience.The purpose of the Maintenance Technician’s role is to perform routine and non-routine maintenance on production and facility equipment to support production of roofing materials. This position is also responsible for meeting facility targets for safety, productivity, and machine uptime.&nbsp; This role will conduct effective problem solving and troubleshoot processes to develop corrective actions.Responsibilities:&nbsp; <ul><li>Follow all Johns Manville safety and environmental procedures and policies.</li><li>Attend plant safety and training meetings as scheduled.</li><li>Follow Job Safety Analysis (JSA's), uses safe work practices, and reports hazardous conditions at all times. Wear protective clothing &amp; equipment as required.</li><li>Develop JSA’s for new tasks and review JSA’s annually.</li><li>Perform routine and non-routine maintenance activities of mechanical and electrical systems.</li><li>Display advanced working knowledge of electrical (single phase and 3 phase), mechanical, hydraulics, and pneumatics systems.</li><li>Install and repair electrical conduit and cable, including connections, controls, grounding, etc.</li><li>Work from electrical and mechanical schematics to troubleshoot or install new or modify existing equipment.</li><li>Perform voltmeter, ammeter, wattmeter, and other electrical measurements.</li><li>Inspect equipment and reports on defective part and unsatisfactory conditions to further preventative maintenance program.</li><li>Maintain, adjust, service and lubricate equipment keeping it in good operating conditions with respect to proper aligning, functioning and lubrication of parts.</li><li>Participate in continuous improvement and Root Cause Corrective Action (RCCA) teams.</li></ul><ul><li>Assist co-workers as directed.</li><li>Perform and complete other work as assigned by supervisor.</li><li>Provides feedback and solutions to leadership on critical equipment issues pertaining to safety or operational capabilities</li><li>Display flexible outlook toward change management, working on cross-functional teams, training for the use of new tools and methodologies, and willingness and ability to obtain operating knowledge of all production equipment.&nbsp;&nbsp;</li><li>Participate in daily housekeeping efforts.&nbsp; Ensure job site is consistently clean after every job and clean maintenance shop after every shift.</li><li>May be required to perform other related duties as assigned</li></ul>Leadership Responsibilities:<ul><li>There are no supervisory responsibilities for direct reports for this position, but this person must have the skills to interact as a leader with all plant department employees.</li><li>Work with plant supervision to communicate the status of planned jobs, unplanned jobs waiting on parts, or unplanned jobs needing engineering or technical resources</li></ul>Requirements: (education, skills, and abilities)<ul><li>Must be signed off on all Maintenance Technician I job qualifications</li><li>2-5 years multi-craft maintenance experience</li><li>Strong commitment to safety</li><li>Ability to work well with others</li><li>Strong problem-solving capabilities</li><li>Excellent interpersonal and communications skills</li><li>Ability to work effectively in a fast-paced environment</li><li>Intermediate computer skills</li><li>Demonstrated ability to troubleshoot and handle multiple priorities and projects</li><li>Ability to disassemble, diagnose, repair, and perform preventative repair measures on mechanical equipment including, but not limited to: pumps, gearboxes, reducers, couplings, seals, rotating elements, blowers, fans, hydraulic units, valves, chillers, and compressors</li><li>Demonstrate advanced Mechanical aptitude, including pipe fitting, fabricating</li><li>Knowledge of use of hand tools and power tools</li><li>Knowledge of shop machinery, including hydraulic press, mill &amp; drill press, lathe, and saw(s) (band &amp; Chop)</li><li>General knowledge of building lighting systems</li><li>General knowledge of AC/heating systems</li><li>General knowledge of building fire alarm systems</li><li>Advanced knowledge of Lock, Tag, Clear, and Try program</li><li>General knowledge of PLC troubleshooting</li><li>General knowledge of VFD troubleshooting</li><li>Display understanding of 480V system to include arc-flash training and safe working practices per NFPA 70E</li><li>Ability to provide troubleshooting and diagnosis on process heating and cooling equipment</li><li>Ability to consistently make appropriate decisions while being flexible with regard to work assignments and priorities.</li></ul><ul><li>Local travel for training purposes</li></ul>Physical Requirements:The physical requirements of this position are: (these requirements are typical for most of our manufacturing roles)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <ul><li>The ability to stand for extended periods</li><li>The ability to manually lift, push or pull at least 50 pounds safely and with proper body mechanics, sometimes while in awkward positions.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Use of hands (repetitive motion, grabbing, feeling, sensing, pulling)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to work safely in a fast-paced, sometimes stressful work environment</li><li>The ability to safely and effectively work in an often-dusty work environment that experiences a broad range of temperatures (very hot to very cold).&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to withstand the rigors of working a 12(or 8)-hour rotating shift schedule.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to bend, stoop or kneel repetitively.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to reach or work above the shoulder&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li></ul>Incumbent must be physically able to perform essential job functions. Reasonable accommodation may be made to enable individuals with disabilities to perform essential job functions.Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

729 Facilities and Maintenance Jobs