field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.CompensationThe base hourly rate for this position is $31.38.The anticipated deadline to apply for this role is Thursday, July 31, 2025. This deadline is JM's "good-faith estimate" of when the application will close. JM may extend the deadline and will update this posting promptly if it is extended.This isa skilled labor position working to install, repair and maintain electrical and mechanical equipment in and around the plant. &nbsp;Candidate must be dependable, able to follow instructions and directions, according to established operating procedures, perform the following duties while cooperating with all levels within the organization in support of the four Johns Manville core values: People, Passion, Perform and Protect.Pay Rate: $31.38 / hour with a $3 / hour shift differential for Swing Shift+$2,000 SIGN ON BONUS!!Your Day to Day:<ul><li>Supports and promotes safe practices and environmental commitments in alignment with company commitments, policies, and compliance requirements</li><li>Understanding of power systems, electrical codes, and standards</li><li>Ability to work with plant engineers, vendors, contractors and others to complete approved projects.</li><li>Performs circuit repairs or new installations as required on either capital or expense projects.</li><li>Will be required to perform electrical testing and troubleshooting on circuits with nominal voltages of 120 VAC or less.</li><li>Will be required to perform electrical testing and troubleshooting on circuits that have potential arc flash incident energy up to, but not exceeding 4 cal/cm2 (NFPA 70E Category 1).</li><li>May perform repairs on electrical circuits that do not surpass the voltage and arc flash incident energy levels described above, provided the equipment being repaired is in an electrically safe work condition (deenergized, LTCT, and verified for the absence of voltage).&nbsp; No live repair work is permitted.</li><li>Works from all types of electrical drawings (one line, ladder, and schematics) and is able to work without drawings when necessary.</li><li>Possesses knowledge of and performs hydraulic and pneumatic system diagnosis, repair and new installation.</li><li>Must be skilled in the use of test equipment including but not limited to digital multimeter, clamp-on amp meter, and megger.</li><li>Performs diagnosis repair and new installations of combustion control equipment; batch house computer and related circuits; air conditioning equipment; and controls and circuits in the powerhouse.</li><li>Diagnoses problems and makes emergency repairs to mobile equipment</li><li>Erects, assembles, installs, and connects equipment and machinery moving it as necessary using proper safe rigging equipment, lift truck or other means.</li><li>Performs repairs and maintenance work on all plant equipment, machinery and systems including, but not limited to, trouble shooting, dismantling, cleaning, lubricating, repairing, replacing parts, adjusting, aligning, rebuilding, and reassembling.</li><li>Maintains piping system for steam, water, air and other systems.</li><li>Assists maintainers and electricians.</li><li>Completes requisitions, time distribution, material lists, material usage lists and performs other clerical duties necessary to maintain proper records relative to the work performed</li><li>Documents all work using work order system.</li><li>Performs other work as required or directed by Supervisor</li></ul>What You Bring to the Team:<ul><li>High school diploma or equivalent and an Industrial Electromechanical certificate from an accredited institution</li><li>Minimum of two years relatable experience</li><li>Formalized Programmable Logic Controller education and training to include troubleshooting and programming of PLC I/O (Inputs and Outputs).&nbsp; Education must include the utilization Allen Bradley software for troubleshooting I/O issues.</li><li>Ability to troubleshoot and program Allen Bradley AC drives.</li><li>Must be able to read and understand written instructions, policies and procedures</li><li>Must be able to read temperature and pressure gauges</li><li>Reads, interprets, and follows blueprints and sketches, making all measurements and calculations necessary to complete the job. Ability to read and understand Process &amp; Instrumentation Diagrams (P&amp;ID) to troubleshoot and resolve problems with field I/O devices and circuits.</li><li>Effective communication skills with fellow employee’s and/or department personnel</li><li>Demonstrated ability to work independently or within a team environment</li><li>Willingness to learn new technology and equipment operation</li><li>Must have own tools in order to perform job duties</li><li>Willingness to improve technical skills through continuing education, on-site training, and other opportunities as provided.</li></ul>Physical DemandsThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.&nbsp; Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly required to stand and walk; climb or balance and stoop, kneel, crouch, or crawl. The employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms and communicate accurately with coworkers.&nbsp; The employee will frequently engage in repetitive motions.&nbsp; The employee must frequently, lift, push or pull 25 pounds and occasionally lift, push or pull 100 pounds with assistance. Visual acuity is required to work around and with machinery including close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.Work EnvironmentThis job is in an industrial, manufacturing environment.&nbsp; The job requires working frequently around and with heavy machinery with moving mechanical parts, industrial ovens, and mobile equipment.&nbsp; The environment is not climate controlled, and employees must be able to work in environments that may be extremely hot and humid or cold depending upon the operation and the season.&nbsp; Walking surfaces can be wet, dusty, and uneven.&nbsp; Areas of the building where work must be done have high noise levels, vibration, and/or fumes.&nbsp; Some working areas contain the presence of airborne particles which can irritate the skin or eyes.&nbsp; The manufacturing process involves toxic or caustic chemicals.&nbsp; Employees are required to wear personal protective equipment which includes steel-toed shoes, ear protection, eye protection and in certain areas may be required to where dust masks, gloves, respirators, or head protection.&nbsp;&nbsp;Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Johns Manville

Electromechanical Technician

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!FACILITIES&nbsp;Rocket Lab’s Facilities team is responsible for maintenance, operations, and improvements projects across our locations, making sure that the facilities our teams use every day are well looked after and operating as they should.EQUIPMENT MAINTENANCE TECHNICIAN IIBased out of Rocket Lab's Headquarters in Long Beach, CA the Equipment Maintenance Technician is responsible for the creation and execution of equipment maintenance tasks across two buildings. You will support the Facilities Manager and Production organizations, with deliverables required for internal leadership, board of directors, and investors. &nbsp;WHAT YOU’LL GET TO DO:&nbsp;&nbsp;<ul><li>Maintain and repair all critical assets to ensure their proper operating condition</li><li>Create and carry out preventative maintenance requirements for each piece of equipment (including CNC machines, Inspection equipment, Testing equipment, 3d Printers, Vacuum Pumps, etc.)</li><li>Troubleshoot mechanical, electrical, and HVAC systems down to the component level</li><li>Read and utilize schematics (mechanical/ electrical/pneumatic/hydraulic)</li><li>Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment</li><li>Create and maintain maintenance plans within the approved systems</li></ul>YOU’LL BRING THESE QUALIFICATIONS: &nbsp;<ul><li>High school diploma or equivalency certificate  &nbsp;</li></ul><ul><li>5+ years of experience maintaining and repairing mechanical, electrical, pneumatic, or hydraulic systems</li></ul><ul><li>Experience working in a highly regulated manufacturing or production environment&nbsp;&nbsp;</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:&nbsp;&nbsp;<ul><li>Maintenance experience on vacuum systems, environmental thermal testing &nbsp;</li></ul><ul><li>Any training certifications are a plus</li></ul><ul><li>Experience operating a forklift and other related inventory equipment &nbsp;</li></ul><ul><li>Ability to read and interpret electrical, hydraulic and pneumatic schematics and drawings &nbsp;</li></ul><ul><li>Ability to write detailed repair reports (advanced MS Office skills) &nbsp;</li></ul><ul><li>Analytic thinker that gets to the root of the problem and comes up with permanent solution to remedy the issue &nbsp;</li></ul><ul><li>Ability to navigate, utilize, and close out work orders  &nbsp;</li></ul><ul><li>Ability to maintain a safe and clean working environment while adhering to company policies, quality policies, and industry standards &nbsp;</li></ul><ul><li>Detail oriented, organized, and able to demonstrate a high sense of urgency &nbsp;</li></ul>ADDITIONAL REQUIREMENTS &nbsp;<ul><li>Must be able to lift up to 25lbs unassisted  &nbsp;</li></ul><ul><li> Ability to remain focused while working in hazardous environments, while wearing appropriate PPE  &nbsp;</li></ul><ul><li>Lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position &nbsp;</li><li>Must be able to work on-call, extended hours and/or weekends as needed</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$26—$36 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Rocket Lab

Equipment Maintenance Technician II

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!FACILITIESRocket Lab’s Facilities team is responsible for maintenance, operations, and improvements projects across our locations, making sure that the facilities our teams use every day are well looked after and operating as they should.FACILITIES TECHNICIAN IIBased onsite at Rocket Lab in Long Beach, California, the Facilities Technician is responsible for facilities maintenance, operations, and improvement projects at Rocket Lab's headquarter facility and Rocket Lab’s Engine Development Center.&nbsp;WHAT YOU’LL GET TO DO:<ul><li>Handle Rocket Lab headquarters and/or the Engine Development Center facility operations as primary responsibility, including janitorial, maintenance, repair, and update/upgrade activities.&nbsp;</li><li>Responsible for all building systems including mechanical, electrical, plumbing, HVAC, safety, and waste management.</li><li>Ensure facilities maintenance work follows safety standards, conforms to specifications, and that work orders are tracked and completed within the budgeted guidelines.</li><li>Manages facilities and equipment breakdown ticketing system (JIRA) and set priorities for resolution.</li><li>Will handle hazardous waste streams in compliance with local, state, and federal regulations.</li><li>Responsible for Rocket Lab headquarters and/or the Engine Development Center Equipment Engineering, including equipment maintenance, repair, and update/upgrade activities, planning, procurement, installation and (de)commissioning of equipment to ensure equipment uptime and reliability in safe conditions.</li><li>Responsible for oversight &amp; maintenance of the Rocket Lab headquarters and/or the Engine Development Center facility and building &amp; manufacturing infrastructure therein, adherence to and enforcement of site safety, security and cleanliness requirements.</li></ul>YOU’LL BRING THESE QUALIFICATIONS AS A FACILITIES TECHNICIAN II:<ul><li>5+ years of facility maintenance experience in any of the following industries: aerospace, automotive, medical device, or a heavily regulated manufacturing facility.</li><li>High School Diploma, GED OR 9+ years of experience in facilities maintenance in lieu of diploma.&nbsp;</li><li>Experience with facilities systems and improvement projects.</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>Licensed electrician or certified electrical professional is preferred.&nbsp;</li><li>Experience with managing cleanroom.</li><li>Capable of solving complex problems with little to no supervision in a timely manner.</li></ul>ADDITIONAL REQUIREMENTS <ul><li>Ability to remain focused while working in hazardous environments, while wearing appropriate PPE&nbsp;</li><li>Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position&nbsp;</li></ul><ul><li>Able to lift up to 25lbs. unassisted&nbsp;</li></ul><ul><li>Must be able to climb ladders and be comfortable working in tight spaces.&nbsp;</li></ul><ul><li>Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls.&nbsp;</li></ul><ul><li>Must be able to walk or stand for extended periods – 8 hours min &nbsp;</li></ul><ul><li>Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces &nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$26—$36 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Facilities Technician II

<h4>Introduction</h4> Are you a current DOT employee looking to advance your career within the agency?&nbsp; Do you want to continue to help make commuting and traveling throughout CT safe? If so, we encourage you to read below &amp; apply today! The&nbsp;State of Connecticut&nbsp;Department of Transportation&nbsp;(DOT), invites its&nbsp;experienced agency employees to apply for the position of Transportation Maintenance Crew Leader (Automotive Maintenance) located in the Putnam Repair Garage. CONTINUE TO ENJOY <ul><li>Our&nbsp;State Employee Benefits Overview&nbsp;page!</li><li>Work at a Forbes-recognized company! Connecticut is proud to be featured on both&nbsp;America's Best Employers by State&nbsp;and&nbsp;Best Employers for New Grads&nbsp;in 2024. With our dynamic job market and commitment to fostering a thriving workforce, Connecticut stands out as a top destination for both seasoned professionals and fresh graduates seeking to launch their careers.</li><li>Professional growth and development opportunities.</li><li>A healthy&nbsp;work/life balance&nbsp;to all employees.</li><li>Working for an award winning agency! CTDOT was recently awarded the Employer of the Year award by the Connecticut Society of Civil Engineers (CSCE) and named the Women's Transportation Seminar (WTS) CT Employer of the Year for 2024!</li></ul>POSITION HIGHLIGHTS<ul><li>Monday - Friday.</li><li>Full Time, 40 hours per week.</li><li>First Shift, 7:30 AM to 4:00 PM.</li><li>Location: Putnam Repair Garage.</li><li>Office/On-Site.</li><li>NP-2 Maintenance and Service bargaining unit.</li><li>Applications to this recruitment may be used for future vacancies in this job class, for up to one year from the posting date, in other Repair Facilities in the Department of Transportation.</li></ul> THE ROLE This position is responsible for: <ul><li>Overseeing and assigning daily duties to a crew of various mechanics.</li><li>Scheduling and assigning daily assignments.</li><li>Establishing and maintaining effective working relationships and communicating with staff, both verbally and in writing.</li><li>Reviewing and evaluating the work of staff and making effective recommendations.</li><li>Time management, workload scheduling and setting priorities.</li></ul> JOB REQUIREMENTS <ul><li>Applicants must indicate that they hold a valid Commercial Driver's License (CDL), with tank endorsement, in the "Licenses and Professional Certifications" section of the application, or they will not be considered.&nbsp;Applicants invited to interview will be required to produce a copy of their current valid Commercial Driver's License (CDL) Class A or B, reflecting the tank endorsement and valid Medical Examiner's Card (MEC) at the time of interview, or they will be immediately disqualified.</li><li>Incumbents in this class must be willing to accept emergency overtime duties, including snow and ice removal, whenever his or her services are&nbsp;needed; mandatory winter overtime from November 1 through April 30.&nbsp;Various storm events will require employees to stay at work for the duration of the storm, which at&nbsp;times could be up to a period of several days, to include holidays and weekends.</li><li>As a support to&nbsp;Highway Operations units, various storm events will require employees to be at work prior to, during, and after a storm or weather event, which at times could be up to a period of several days, to include holidays and weekends. Additionally, in preparation for the winter season, overtime may be required to prepare the fleet and equipment.</li><li>Incumbents in this class will be required to have a 30-mile residency from the posted job location. </li><li>Candidates must show how they meet the required knowledge and experience on their application to proceed further in the hiring process.</li><li>Candidates will be required to bring a copy of their Master Application at the time of interview.</li></ul> ABOUT US The mission of the Connecticut Department of Transportation is to provide a safe and efficient intermodal transportation network that improves the quality of life and promotes economic vitality for the State and the region. We are looking for energetic and driven team players who are passionate about serving the public and about the work we do&nbsp;to deliver the DOT's mission. To learn more about our mission, vision and values, please click&nbsp;here. <h4>Selection Plan</h4> FOR ASSISTANCE IN APPLYING: Check out our&nbsp;Applicant Tips on How to Apply! Need more resources? Visit our&nbsp;Applicant Reference Library&nbsp;for additional support throughout the recruitment process. BEFORE YOU APPLY: <ul><li>Meet Minimum Qualifications:&nbsp;In order to be considered for this job opening you must be&nbsp;a current State of CT employee of the agency listed above for at least six (6) months of full-time service or full-time equivalent service, absent any applicable collective bargaining language, and meet the Minimum Qualifications as listed on the job opening. You must specify your qualifications on your application.</li><li>Educational Credits:&nbsp;List your earned credits and degrees from accredited institutions accurately on your application. To receive educational credits towards qualification, the institution must be accredited. If the institution of higher learning is located outside of the U.S., you are responsible for providing documentation from a recognized USA accrediting service which specializes in determining foreign education equivalencies to the contact listed below.</li><li>Resume Policy:&nbsp;Per Public Act 21-69, resumes are not accepted during the initial application process. As the recruitment process progresses, candidates may be required to submit additional documentation to support their qualification(s) for this position. This documentation may include: a cover letter, resume, transcripts, diplomas, performance reviews, attendance records, supervisory references, licensure, etc., at the request and discretion of the hiring agency.</li><li>Preferred Shift/Location:&nbsp;Select all location(s) and shift(s) you are willing to work on your application. Failure to do so may result in not being considered for vacancies in that specific location or shift.</li><li>Timely Submission:&nbsp;All application materials must be received by the job posting deadline. You will be unable to make revisions once you officially submit your application to the State. Late submissions are rarely accepted, with exceptions only for documented events that incapacitate individuals during the entire duration of the job posting. Request exceptions by emailing <a href="mailto:DAS.SHRM@ct.gov" target="_blank">DAS.SHRM@ct.gov</a>.</li><li>Salary Calculations:&nbsp;For current state employees, salary calculations are not necessarily comparable from one of the three branches of state government (i.e., Executive, Legislative, Judicial) to the other.</li><li>Note:&nbsp;The only way to apply to this posting is via the ‘Apply’ or ‘Apply Online’ buttons on the official State of Connecticut Online Employment Center job posting.</li></ul>AFTER YOU APPLY: <ul><li>Referral&nbsp;Questions:&nbsp;This posting may require completion of additional Referral Questions (RQs), which must be completed by the questionnaire’s expiration date. If requested, RQs can be accessed via an email sent to you after the job close date or by visiting your JobAps Personal Status Board (Certification Questionnaires section).</li><li>Prepare For An Interview:&nbsp;Interviews are limited to those whose experience and training are most aligned with the role. To prepare, review this helpful&nbsp;Interview Preparation Guide&nbsp;to make the best impression!</li><li>Stay Connected!&nbsp;Log in daily to your JobAps Personal Status Board to track your status and check email (including spam/junk folders) for updates and tasks.</li><li>The immediate vacancy is listed above, however, applications to this recruitment may be used for future vacancies in this job class.</li><li>Note:&nbsp;This position will be filled in accordance with contractual language, reemployment, SEBAC, transfer, promotion and merit employment rules. Candidates who are offered and accept a position with the State of Connecticut are bound by the State Code of Ethics for Public Officials and State employees, available at&nbsp;<a href="http://www.ct.gov/ethics" target="_blank">www.ct.gov/ethics</a>.</li></ul> QUESTIONS? WE’RE HERE TO HELP: Due to high volume, we are unable to confirm receipt or provide status updates directly. For recruitment updates, please check your Personal Status Board and review our Frequently Asked Questions. If you have additional questions about the recruitment process, reach out to Brittney Woodley at&nbsp;<a href="mailto:brittney.woodley@ct.gov" target="_blank">brittney.woodley@ct.gov</a>. Join the State of Connecticut and take your next career step with confidence! <h4>PURPOSE OF JOB CLASS (NATURE OF WORK)</h4> In the Department of Transportation and the Connecticut AirportAuthority this class is accountable for acting as a working supervisor for anassigned group of Transportation Maintainers and/or Qualified Craft Workersengaged in an area of transportation maintenance or closely related activities. <h4>EXAMPLES OF DUTIES</h4> <ul><li>Plans crew workflow and determines priorities;&nbsp;</li><li>Schedules, assigns, oversees, and reviews work;&nbsp;</li><li>Establishes and maintains crew procedures;&nbsp;</li><li>Provides staff training and assistance;&nbsp;</li><li>Conducts or assists in conducting performance evaluations;&nbsp;</li><li>Acts as liaison with operating units, agencies, and outside officials regarding unit policies and procedures;&nbsp;</li><li>Requisitions materials and equipment appropriate to the various jobs;&nbsp;</li><li>Participates in performing the duties of the crew;&nbsp;</li><li>May make recommendations on policies or standards;&nbsp;</li><li>May prepare reports and correspondence;&nbsp;</li><li>May do preliminary site inspection of assigned jobs;&nbsp;</li><li>May be required to stand by for and respond to fire and/or crash emergency situations at State-owned airports;&nbsp;</li><li>Performs related duties as required.</li></ul> <h4>KNOWLEDGE, SKILL AND ABILITY</h4> <ul><li>Knowledge of the materials, equipment and approved methods in the maintenance and repair of automotive and mechanical equipment;&nbsp;</li><li>Skills <ul><li>interpersonal skills;&nbsp;</li><li>oral and written communication skills;&nbsp;</li><li>in the operation, repair and maintenance of automotive and highway equipment;&nbsp;</li></ul></li><li>Ability to <ul><li>diagnose motor and equipment problems;&nbsp;</li><li>use complicated testing equipment and welding devices;&nbsp;</li><li>utilize computer software;&nbsp;</li></ul></li><li>Supervisory ability.</li></ul> <h4>MINIMUM QUALIFICATIONS - GENERAL EXPERIENCE</h4> Two (2) years of skilled experience in automotive maintenance and repair. NOTE: For state employees this experience is interpreted at the level of a Transportation Maintainer 3. <h4>PREFERRED QUALIFICATIONS</h4> <ul><li>Knowledge and experience of standard practices, materials, tools, and equipment used in the repair and fabrication of diesel, auto, and heavy equipment.</li><li>Knowledge and experience in inspecting, diagnosing, and repairing routine to moderately complex mechanic problems of diesel, auto, and heavy equipment.</li><li>Knowledge of Department policies and procedures.</li><li>Experience in an acting capacity as a Transportation Maintenance Crew Leader (Automotive Maintenance).</li><li>Experience with effectively working a high production environment.</li><li>Some experience with Microsoft Computer applications (Outlook, Excel, Power Point, SharePoint).</li></ul> <h4>SPECIAL REQUIREMENTS</h4> <ul><li>Incumbents in this class will be required to accept assignment to emergency duties including snow and ice removal as required.</li><li>Incumbents in this class may be required by the appointing authority to possess and retain appropriate current licenses, permits and/or certifications.</li></ul> <h4>CHARACTER REQUIREMENTS</h4> At State Airports: In addition to the checking of references and offacts stated in the application, a thorough background investigation of eachcandidate may be made before persons are certified for appointment. <h4>PHYSICAL REQUIREMENTS</h4> <ul><li>Incumbents in this class must have adequate physical strength, stamina, physical agility and visual and auditory acuity, and must maintain such physical fitness as to be able to perform the duties.</li><li>A physical examination may be required.</li></ul> <h4>WORKING CONDITIONS</h4> <ul><li>Incumbents in this class are exposed to extremes of weather conditions, to frequent lifting of heavy weights, to highly dangerous road and traffic conditions, including exposure to heights when working on bridges, to poison ivy, insect bites and allergy irritants during summer months, and to loud and potentially dangerous machinery.</li><li>The appointing authority may require completion of an asbestos removal program consistent with EPA guidelines for operations and maintenance during employment in this class. Incumbents may be required to use protective equipment such as respirators and safety goggles.</li></ul> <h4>Conclusion</h4> AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER The State of Connecticut is an equal opportunity/affirmative action employer and strongly encourages the applications of women, minorities, and persons with disabilities. <h4>ACKNOWLEDGEMENT</h4> As defined by Sec. 5-196 of the Connecticut General Statutes, a job class is a position or group of positions that share general characteristics and are categorized under a single title for administrative purposes.&nbsp; As such, a job class is not meant to be all-inclusive of every task and/or responsibility.

State of Connecticut

Transportation Maintenance Crew Leader (Automotive Maintenance)(Office/On-Site)

<h4>Lead Production Technician</h4>Time type: full timePosted on: June 24, 2025Job requisition id: R5018What we needAs a Lead Production Technician, you will be responsible for system upkeep and operations of automated adapters used to interface with the Symbotic structure. You will be responsible forassisting with system readiness to achieve performance targets as defined by leadership. You will also be responsible forutilizing Human/Machine Interface terminals to effectively operate equipment.What we doThe&nbsp; LeadProduction Technician is part of the Customer Operations organization which is responsible for leading the day-to-day operations of Symbotic’s robotic material handling system. The Customer Operations organization drives operational excellence by engaging and partnering with our onsite customers to drive best-in-class quality, safety and system performance.  What you’ll do<ul><li>Ensure that the safety commitments in compliance with OSHA, Symbotic, and our customers’ processes and procedures are met daily.</li></ul><ul><li>Help lead the team of production technician with direction from site leadership.</li></ul><ul><li>Perform pre-production checks on automated adapters ensuring equipment is in ‘ready to run’ state.</li></ul><ul><li>Process and monitor the flow of the automated storage and retrieval system, through means of the adapters, including manual inbound, automatic inbound, automatic outbound, to achieve maximum throughput and cases per hour.</li></ul><ul><li>Prepare pallets for induction into the Symbotic storage and retrieval system.</li></ul><ul><li>Assess cause of system stoppage and return to service using Human/Machine Interface (HMI) and manual intervention.</li></ul><ul><li>Assist other team members in the operation of systems troubleshooting.</li></ul><ul><li>Analyze recurring faults and determinebest corrective action.</li></ul><ul><li>Communicate and escalate all issues impacting production immediately to operational leadership.</li></ul><ul><li>Contribute to overall system uptime through system preservation, robot recovery, suspect removal, and bot health actions.</li></ul><ul><li>Make recommendations for process/continuous improvement.</li></ul><ul><li>Perform periodic system inspections including: cleaning, lubrication, tolerance checking, component validation.</li></ul><ul><li>Report all out of spec conditions and perform root cause corrective action.</li></ul><ul><li>Maintain continuous operation of system components.</li></ul><ul><li>Monitor and utilize common radio etiquette while obtaining instructions from leadership and operational leads.</li></ul><ul><li>Perform rover bot upkeep to include, but not limited to, replacing wheels, cleaning, ESD brushes, sensors, etc.</li></ul><ul><li>Responsible for automated robotic vehicle recovery in the Symbotic Matrix select system to include working in restrictive environments.</li></ul><ul><li>Assist Automation technicians with breakdown calls and continuous system availability.</li></ul><ul><li>Perform basic duties of the Automation Technicians as needed.</li></ul><ul><li>Other duties as assigned by leadership.</li></ul>What you’ll need<ul><li>Demonstrates commitment and ability to work safely.</li></ul><ul><li>Reliable and maintains satisfactory attendance.</li></ul><ul><li>Produce quality work.</li></ul><ul><li>Ability to maintain required productivity/work expectations.</li></ul><ul><li>Be proficient in performing all System Inspection functions including: cleaning, lubrication, tolerance checking, current measurements, and checking electrical systems.</li></ul><ul><li>Ability to prioritize work to gain maximum uptime and throughput from an automated cell.</li></ul><ul><li>Ability to analyze stoppages and resolve/escalate accordingly.</li></ul><ul><li>Ability to work with limited supervision following system procedures and manuals.</li></ul><ul><li>A high sense of urgency.</li></ul><ul><li>Takes critical feedback and recognition positively.</li></ul><ul><li>Ability to Multi-task and perform multiple job functions at once.</li></ul><ul><li>Must be literate, written and verbal, in English Language.</li></ul>Our Environment<ul><li>Approximately 75% of time will be spent on a construction site with PPE required (hard hat, safety vest, steel toes, eyeglasses, ear protection, fall protection (e.g., safety harness)&nbsp;</li></ul><ul><li>There will be steep stairs to climb into the structure. You may be required to routinely walk up and down stairs to navigate the automation structure.</li></ul><ul><li>You will regularly be near railings that are high off the ground&nbsp;</li></ul><ul><li>Subject to environmental conditions, protection from weather conditions but not necessarily temperature changes. Must be capable of working in temperatures ranging from 105° to 32° Fahrenheit.</li></ul><ul><li>Frequent ability to safely and efficiently lift items weighing up to 50lbs and move items weighing up to 80lbs.</li></ul><ul><li>Stand/walk for up to 10-12 hours and is frequentlyrequired to walk and reach with hands and arms&nbsp;</li></ul><ul><li>The employee is routinely required to work at heights of up to 45 feet and within restrictive areas of 24 inches. Where you may need to be able to stand, climb, balance, stoop, kneel, crouch, or crawl.</li></ul><ul><li>Must be capable of occasional and/or continuous feeling, seeing, hearing, bending, twisting, stooping, pushing, pulling, balancing, gripping, climbing, crawling, sitting, handling objects, and repetitive movement using both hands and feet. Must comply with all safety requirements and protocols, including without limitation Lock out tag out safety protocols and fall protection safety protocols</li></ul>#LI-BB1#LI-Onsite Apply Now

Symbotic

Lead Production Technician

Company ProfileGold Coast JCB is the JCB dealer for southeast FL with a strong commitment to be the best service department in the area. We are looking for Technicians that want to grow their careers with a company that will support them and be proud of. Seeking a Mobile Construction Equipment Technician/Mechanic with strong diagnostic skills who can easily communicate with customers. Come grow with us. At JCB, we stand behind our products – and our name.Position PurposeReporting to the Service Manager, the Service Field Technician is responsible for diagnosing, repairing and maintaining various types of heavy machinery, aerial equipment, generators, and other equipment for construction, industrial, agricultural and government applications. Always providing the best customer service possible by focusing on customer uptime, utilizing Gold Coast JCB unique abilities as JCB authorized dealer in the territory.Major Tasks, Responsibilities &amp; Key Accountabilities<ul><li>Drive to and from customer jobsites or facilities on a company service truck, to perform services on the field.</li><li>Complete and turn in reports that capture all time and work completed, with clear notes.</li><li>Provide diagnostic analysis, repair, or preventive maintenance for customer and company machines.</li><li>Assist and work with other technicians on complicated jobs and when required.</li><li>Ability to mentor, teach and advice other technicians.</li><li>Complete in shop or on-site system audits and evaluations on machines.</li><li>Assists with customers product clinics, field days, and related promotional events as needed.</li><li>Review work orders for completeness and accuracy, for Service Manager to be able to close and process billing.</li><li>Keep Service Department tools, equipment and company vehicles in good working and safe conditions.</li><li>Practice and adhere to all safety policies and training.</li><li>Maintain a clean and professional image according to JCB and Gold Coast JCB standards.</li><li>Conduct business in alignment with company’s Mission, Vision, and Core Values.</li></ul>Minimum Qualifications<ul><li>College degree in Diesel or Technical related field.</li><li>Will consider equivalent work experience in lieu of educational qualifications.</li><li>10+ years of experience as Service Technician or similar position, in a heavy machinery, truck, or diesel engine industry, with proven track record.</li><li>Strong written and verbal communications skills.</li><li>Knowledge of heavy machinery, truck or diesel engine industries.</li><li>Strong computer skills to perform diagnostics, complete and submit reports, etc.</li><li>Ability to travel.</li></ul>Preferred QualificationsBilingual: English/SpanishKnowledge, Skills, Abilities &amp; Competencies<ul><li>Proficient in Microsoft Office software</li><li>Comfortable in an in-person office environment</li><li>Technical competence is a plus</li><li>Must be customer service oriented, flexible, and have a high energy level</li><li>Must have excellent follow-through skills</li><li>Must have a professional, polished, and sophisticated demeanor and be comfortable in most social settings</li><li>Must be open to domestic and international travel</li><li>Desire and proven ability to learn and grow</li></ul>Physical RequirementsThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly required to:<ul><li>Ability to stand and walk with frequent lifting, guiding and/or carrying of lightweight materials and equipment for up to 12 hours.</li><li>Ability to twist upper body frequently, bend at waist, kneel, crouch and negotiate uneven surfaces.</li><li>Able to lift up to 75 pounds * Use hands, arms and legs fully; grasp, manipulate and assemble small to large objects with the aid of forklifts or cranes as needed; see and hear well. Must be able to hear well with or without aid.</li><li>Good hand eye coordination.</li><li>Communicate by speech and hearing in person at a basic English and Spanish proficiency.</li></ul>JCB is an equal employment opportunities (EEO) employer in accordance with applicable federal, state and local laws. JCB complies with applicable state and local laws governing non- discrimination in employment in every location in which the company has facilities. EEO EMPLOYER/VET/DISABLEDJCB is not currently hiring individuals for this position who now or in the future require sponsorship for employment visa status; however, as a global company, JCB offers many job opportunities outside of the U.S. which can be found through our website at <a href="https://www.jcb.com/en-gb/about/careers" target="_blank">https://www.jcb.com/en-gb/about/careers</a>.JobFamilyCustomer ServicePayTypeHourly

Gold Coast - Shop Service Technician 

<h4>Our Culture</h4>EDP is a rapidly growing company — with deep experience in retail and commercial propane sales, operations and finance. We provide safe, reliable propane service to residential, commercial, industrial, and agricultural customers from Connecticut to California.We service more than&nbsp;200,000&nbsp;customers in&nbsp;24&nbsp;states, with a presence in rural America as well as in major metropolitan areas. We have become a significant player in the propane industry, recognized in 2022, 2023 and 2024 as one of the Top Ten Propane Marketers by&nbsp;LP Gas Magazine. Since our inception in 2012, EDP has helped more than 44 owners of well-run propane businesses transition to their own “next chapter” while benefiting everyone involved.Responsibilities:<ul><li>Install tanks adhering to all state and local requirements including NFPA 58 and 54.</li><li>&nbsp;If applicable, complete training and testing for all required state licenses and certifications.</li><li>&nbsp;Immediately report all incidents and accidents to the General Manager.</li><li>Maintain a Class B CDL with Tanker and Hazmat endorsements as required.</li><li>Seasonal Support: Assist with deliveries by driving a delivery vehicle, as necessary.</li><li>&nbsp;Accurately complete and submit service orders daily.</li><li>Perform daily inspections (DVIR) of the truck, maintaining it in excellent working condition.</li><li>Accurately document and bill for all parts used, following sales proposals for pricing.</li><li>This role includes on-call responsibilities, as the needs of the company require that you work past your regular departure time or otherwise outside of your regular work hours</li></ul>Minimum Education:<ul><li>High school diploma, GED, or equivalent training and experience.</li></ul>Minimum Work Experience:<ul><li>Basic understanding of computer concepts and usage</li><li>2-3 years of experience in propane, HVAC, or a related field preferred</li><li>Familiarity with propane systems, regulations, and industry standards.</li><li>Strong technical aptitude and ability to learn propane systems and installation practices.</li><li>Excellent communication skills, customer service orientation, and professional appearance.</li><li>Ability to work independently and as part of a team in various environments and weather conditions.</li><li>Basic computer skills for completing service orders and maintaining documentation.</li></ul>Required Licenses, Certifications, Registrations:<ul><li>Class B CDL License</li><li>Tanker/ Hazmat Endorsement (Preferred)</li></ul> <h4>We Offer Amazing Benefits!</h4>In addition to competitive wages, we are proud to offer a comprehensive benefits package to help support the physical and financial health of our employees and their families.Our benefits program allows you to customize your coverage, to select the best plans to meet your family’s needs while taking advantage of tax savings. Eligible employees have the option to enroll in any of the following options with many of them offering pre-tax premium deductions to lower your taxable income, thereby reducing your income taxes.<ul><li>Medical Insurance – multiple options to choose from</li><li>Dental Insurance</li><li>Voluntary Vision Insurance</li><li>Health Savings Account</li><li>Flexible Spending Account</li><li>Confidential Employee Assistance Program (EAP)</li><li>Voluntary Supplemental Life and AD&amp;D Insurance</li><li>Voluntary Short-Term Disability</li><li>401(K) with Company Match</li><li>Tuition Reimbursement</li><li>Propane discount</li></ul>As part of your comprehensive compensation package, we provide eligible employees with the following benefits at no cost:<ul><li>Paid Holidays &amp; Time Off</li><li>$50,000 Basic Life/AD&amp;D benefit</li><li>Long Term Disability</li></ul>Equal Opportunity Employer Minorities/Women/Protected Veterans/DisabledThis job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Service Technician

<h4>Our Culture</h4>EDP is a rapidly growing company — with deep experience in retail and commercial propane sales, operations and finance. We provide safe, reliable propane service to residential, commercial, industrial, and agricultural customers from Connecticut to California.We service more than&nbsp;200,000&nbsp;customers in&nbsp;24&nbsp;states, with a presence in rural America as well as in major metropolitan areas. We have become a significant player in the propane industry, recognized in 2022, 2023 and 2024 as one of the Top Ten Propane Marketers by&nbsp;LP Gas Magazine. Since our inception in 2012, EDP has helped more than 44 owners of well-run propane businesses transition to their own “next chapter” while benefiting everyone involved.Job Description: We are seeking a skilled Diesel Mechanic with CDL and Haz Mat certifications preferred. The ideal candidate will have extensive experience in heavy truck diagnostics and possess ASE certification (a plus). This role requires the ability to perform roadside repairs promptly and effectively, demonstrating a high level of mechanical expertise. Flexibility in scheduling is essential, and candidates must provide their own tools to perform job duties effectively.Key Responsibilities:<ul><li>Conducting diagnostics and repairs on heavy trucks and diesel engines.</li><li>Performing roadside repairs as needed, ensuring minimal downtime.</li><li>Maintaining a high standard of safety and compliance with regulations.</li><li>Collaborating with team members to ensure efficient workflow and customer satisfaction.</li></ul>Requirements:<ul><li>CDL and Haz Mat certifications preferred.</li><li>Proven experience in heavy truck diagnostics and repairs.</li><li>ASE certification is advantageous.</li><li>Ability to work flexible hours and be on-call as necessary.</li><li>Proficiency in using diagnostic tools and equipment.</li><li>Strong problem-solving skills and attention to detail.</li><li>Must have own tools required for the job.</li></ul><h4>We Offer Amazing Benefits!</h4>In addition to competitive wages, we are proud to offer a comprehensive benefits package to help support the physical and financial health of our employees and their families.Our benefits program allows you to customize your coverage, to select the best plans to meet your family’s needs while taking advantage of tax savings. Eligible employees have the option to enroll in any of the following options with many of them offering pre-tax premium deductions to lower your taxable income, thereby reducing your income taxes.<ul><li>Medical Insurance – multiple options to choose from</li><li>Dental Insurance</li><li>Voluntary Vision Insurance</li><li>Health Savings Account</li><li>Flexible Spending Account</li><li>Confidential Employee Assistance Program (EAP)</li><li>Voluntary Supplemental Life and AD&amp;D Insurance</li><li>Voluntary Short-Term Disability</li><li>401(K) with Company Match</li><li>Tuition Reimbursement</li><li>Propane discount</li></ul>As part of your comprehensive compensation package, we provide eligible employees with the following benefits at no cost:<ul><li>Paid Holidays &amp; Time Off</li><li>$50,000 Basic Life/AD&amp;D benefit</li><li>Long Term Disability</li></ul>Equal Opportunity Employer Minorities/Women/Protected Veterans/DisabledThis job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Mechanic

<h4>Our Culture</h4>EDP is a rapidly growing company — with deep experience in retail and commercial propane sales, operations and finance. We provide safe, reliable propane service to residential, commercial, industrial, and agricultural customers from Connecticut to California.We service more than&nbsp;200,000&nbsp;customers in&nbsp;24&nbsp;states, with a presence in rural America as well as in major metropolitan areas. We have become a significant player in the propane industry, recognized in 2022, 2023 and 2024 as one of the Top Ten Propane Marketers by&nbsp;LP Gas Magazine. Since our inception in 2012, EDP has helped more than 44 owners of well-run propane businesses transition to their own “next chapter” while benefiting everyone involved.Responsibilities:<ul><li>Install tanks adhering to all state and local requirements including NFPA 58 and 54.</li><li>&nbsp;If applicable, complete training and testing for all required state licenses and certifications.</li><li>&nbsp;Immediately report all incidents and accidents to the General Manager.</li><li>Maintain a Class B CDL with Tanker and Hazmat endorsements as required.</li><li>Seasonal Support: Assist with deliveries by driving a delivery vehicle, as necessary.</li><li>&nbsp;Accurately complete and submit service orders daily.</li><li>Perform daily inspections (DVIR) of the truck, maintaining it in excellent working condition.</li><li>Accurately document and bill for all parts used, following sales proposals for pricing.</li><li>This role includes on-call responsibilities, as the needs of the company require that you work past your regular departure time or otherwise outside of your regular work hours</li></ul>Minimum Education:<ul><li>High school diploma, GED, or equivalent training and experience.</li></ul>Minimum Work Experience:<ul><li>Basic understanding of computer concepts and usage</li><li>2-3 years of experience in propane, HVAC, or a related field preferred</li><li>Familiarity with propane systems, regulations, and industry standards.</li><li>Strong technical aptitude and ability to learn propane systems and installation practices.</li><li>Excellent communication skills, customer service orientation, and professional appearance.</li><li>Ability to work independently and as part of a team in various environments and weather conditions.</li><li>Basic computer skills for completing service orders and maintaining documentation.</li></ul>Required Licenses, Certifications, Registrations:<ul><li>Class B CDL License</li><li>Tanker/ Hazmat Endorsement (Preferred)</li></ul> <h4>We Offer Amazing Benefits!</h4>In addition to competitive wages, we are proud to offer a comprehensive benefits package to help support the physical and financial health of our employees and their families.Our benefits program allows you to customize your coverage, to select the best plans to meet your family’s needs while taking advantage of tax savings. Eligible employees have the option to enroll in any of the following options with many of them offering pre-tax premium deductions to lower your taxable income, thereby reducing your income taxes.<ul><li>Medical Insurance – multiple options to choose from</li><li>Dental Insurance</li><li>Voluntary Vision Insurance</li><li>Health Savings Account</li><li>Flexible Spending Account</li><li>Confidential Employee Assistance Program (EAP)</li><li>Voluntary Supplemental Life and AD&amp;D Insurance</li><li>Voluntary Short-Term Disability</li><li>401(K) with Company Match</li><li>Tuition Reimbursement</li><li>Propane discount</li></ul>As part of your comprehensive compensation package, we provide eligible employees with the following benefits at no cost:<ul><li>Paid Holidays &amp; Time Off</li><li>$50,000 Basic Life/AD&amp;D benefit</li><li>Long Term Disability</li></ul>Pay- $29-$33 per hour, depending on experience&nbsp;Equal Opportunity Employer Minorities/Women/Protected Veterans/DisabledThis job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Title Pharmacy Technician/OnCall/UKHC - Retail Pharmacy Requisition Number DU09732 Department Name H5000: CHANDLER - RETAIL PHARMACY Work Location Lexington, KY Salary Range $16.20-$24.82/hour Type of Position Temporary Position Time Status On Call Required Education High School Diploma Required Related Experience 0 years Required License/Registration/Certification Registration with the Kentucky Board of Pharmacy (KBOP) is required within 30 days of new hire if not previously registered as a pharmacy technician in KY. Must renew registration with KBOP on day one if lapsed and must keep registration in good standing and renew annually. Physical Requirements May include standing, sitting, or walking for greater than 5 hours at a time. May require the ability to reach items above or below shoulder level and be able to lift up to 30 pounds. Shift Typical shifts may be assigned to work during operating hours of Monday-Friday (7:00am-midnight), Saturday and/or Sunday shifts per location operating hours. May work in our 24/7 operation at Chandler Retail Pharmacy which may include overnight shifts. Operating hours and days of operation are subject to change based on location of assignment. May be required to work on some holidays which currently are being rotated by all Ambulatory Pharmacy Services staff. Available shift hours varies based on needs of the department. Must participate in some weekend shifts. Job Summary Assists pharmacists in medicine preparation and distribution in a UK HealthCare Retail Pharmacy. Fills prescriptions in a busy retail based setting. May include standing for greater than 5 hours at a time. May require the ability to reach items above shoulder level and be able to lift up to 30 pounds. Requires attention to detail and the ability to provide excellent customer service. Must be reliable and punctual. This position also requires teamwork, excellent communication skills and interpersonal skills. Must be able to communicate and be understood in the English language. Skills / Knowledge / Abilities Requires attention to detail and the ability to provide excellent customer service. Must be reliable and punctual. This position also requires teamwork, excellent communication skills and interpersonal skills. Must be able to communicate and be understood in the English language. Does this position have supervisory responsibilities? No Preferred Education/Experience One year previous work experience (preferably in a related field) is preferred. Prefer previous pharmacy tech experience or work/classes in medical field. Hired candidate must maintain registration with the KY Board of Pharmacy. High school diploma or equivalent required. General chemistry knowledge, basic algebra, and proficient reading/writing/speaking in the English language, preferred. Deadline to Apply 10/31/2025 Our University Community We value the well-being of each of our employees and are dedicated to creating a healthy place for everyone to work, learn and live. In the interest of maintaining a safe and healthy environment for our students, employees, patients and visitors the University of Kentucky is a Tobacco &amp; Drug Free campus. As an Equal Opportunity Employer, we strongly encourage veterans, individuals with disabilities, women, and all minorities to consider our employment opportunities. Any candidate offered a position may be required to pass pre-employment screenings as mandated by University of Kentucky Human Resources. These screenings may include a national background check and/or drug screen.

1,065 Technician Jobs